Advertisement
Guest User

Untitled

a guest
Oct 23rd, 2017
442
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Rebooting device after flashing.
  2. ▒[0000.000] [TegraBoot] (version ▒)
  3. [0000.003] Processing in cold boot mode
  4. [0000.007] Reset reason: software reset
  5. [0000.010] No Battery Present
  6. [0000.014] Error getting nvdumper carve out address! Booting normally!
  7. [0000.020] Sdram initialization is successful
  8. [0000.048] CPU power rail is up
  9. [0000.051] Performing RAM repair
  10. [0000.054] CPU clock init successful
  11. [0000.104] Bootloader downloaded successfully.
  12. [0000.108] CPU-bootloader entry address: 0x83d88000
  13. [0000.113] BoardId: 375
  14. [0000.115] Tsec Carveout Base=0x0fe000000 Size=0x002000000
  15. [0000.120] SecureOs Carveout Base=0x0fdc00000 Size=0x000400000
  16. [0000.125] Nck Carveout Base=0x0fdb00000 Size=0x000100000
  17. [0000.130] Lp0 Carveout Base=0x0fdaff000 Size=0x000001000
  18. [0000.136] RamDump Carveout Base=0x000000000 Size=0x000000000
  19. [0000.141] Platform-DebugCarveout: 0
  20. [0000.145] Using GP1 to query partitions
  21. [0000.150] WB0 init successful
  22. [0000.222] Secure Os PKC Verification Success.
  23. [0000.226] Loading and Validation of Secure OS Successful
  24. [0000.232] NvTbootPackSdramParams: start.
  25. [0000.236] NvTbootPackSdramParams: done.
  26. [0000.240] Starting CPU & Halting co-processor
  27.  
  28. 32BWelcome to TLK
  29.  
  30. TLK initialization complete. Jumping to non-secure world
  31. #NVRM Initialized shmoo database
  32. NVRM CLOCKS: PLLX0: 696000 Khz
  33. NVRM CLOCKS: PLLM0: 924000 Khz
  34. NVRM CLOCKS: PLLC0: 0 Khz
  35. NVRM CLOCKS: PLLP0: 408000 Khz
  36. NVRM CLOCKS: PLLA0: 11289 Khz
  37. NVRM CLOCKS: CPU: 696000 Khz
  38. NVRM CLOCKS: AVP: 48000 Khz
  39. NVRM CLOCKS: System Bus: 48000 Khz
  40. NVRM CLOCKS: Memory Controller: 924000
  41. NVRM CLOCKS: External Memory Controller: 924000
  42. NvRmI2cTransaction: No i2c transaction
  43. EEPROM instance-5: No slave at this instance.
  44. EEPROM instance-0: Querying board info from BCT.
  45. EEPROM instance-0: No board info available for this instance in BCT.
  46. NvRmI2cTransaction: No i2c transaction
  47. EEPROM instance-1: No slave at this instance.
  48. EEPROM instance-1: Querying board info from BCT.
  49. EEPROM instance-1: BoardInfo: 0xffff:0xffff:1797:0000:00:NvRmI2cTransaction: Non
  50. EEPROM instance-2: No slave at this instance.
  51. EEPROM instance-2: Querying board info from BCT.
  52. EEPROM instance-2: No board info available for this instance in BCT.
  53. NvRmI2cTransaction: No i2c transaction
  54. EEPROM instance-3: No slave at this instance.
  55. EEPROM instance-3: Querying board info from BCT.
  56. EEPROM instance-3: No board info available for this instance in BCT.
  57. NvRmI2cTransaction: No i2c transaction
  58. EEPROM instance-4: No slave at this instance.
  59. EEPROM instance-4: Querying board info from BCT.
  60. EEPROM instance-4: BoardInfo: 0x0000:0x0000:1734:0000:00:NvRmI2cTransaction: Non
  61. EEPROM instance-5: No slave at this instance.
  62. EEPROM instance-5: Querying board info from BCT.
  63. EEPROM instance-5: No board info available for this instance in BCT.
  64. NvRmI2cTransaction: No i2c transaction
  65. EEPROM instance-6: No slave at this instance.
  66. EEPROM instance-6: Querying board info from BCT.
  67. EEPROM instance-6: BoardInfo: 0x0000:0x0000:0375:0000:03:NvRmI2cTransaction: Non
  68. EEPROM instance-7: No slave at this instance.
  69. EEPROM instance-7: Querying board info from BCT.
  70. EEPROM instance-7: No board info available for this instance in BCT.
  71. Final BoardID: proc: 375 and pmu 375
  72. Tps65914PmuReadRstReason(): PMIC reset reason - 0x13 - Invalid
  73. ADJUSTED CLOCKS:
  74. MC clock is set to 924000 KHz
  75. EMC clock is set to 924000 KHz (DDR clock is at 924000 KHz)
  76. PLLX0 clock is set to 696000 KHz
  77. PLLC0 clock is set to 0 KHz
  78. CPU clock is set to 696000 KHz
  79. System and AVP clock is set to 48000 KHz
  80. GraphicsHost clock is set to 163200 KHz
  81. MSENC clock is set to 92400 KHz
  82. Vde clock is set to 204000 KHz
  83.  
  84. Bootloader-Cpu Init at (time stamp): 442220 us
  85.  
  86. Pinmux changes applied in kernel way
  87.  
  88. [bootloader] (version 4.00.2016.04-8b2413b7)
  89. Platform Pre Boot configuration...
  90. NvDdkUsbhBlockDevInit..
  91. nvdumper: base(0x0) size(0x0)
  92. nvdumper: Not Supported!
  93. NvAppMain:RAMDUMP addr From Bct=0x0
  94. NCT: PartId(13),Size(0x200000)
  95. NvNctInitPart: Magic(0x7443566e),VID(0x955),PID(0x1001),VER(1.0),REV(0x27)
  96. NvNctInitPart: Done
  97. NCK: Base(0xfdb00000),Size(0x100000)
  98. NCT: CRC:0x83e03c91 (SZ:0x7f4d2c19)
  99. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  100. PMCResetStatus: 3
  101. PMUResetStatus: 0
  102. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  103. Initializing Display
  104. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  105. Attach display
  106. The best display mode is 1920x1200/60Hz, pclk: 154128Khz
  107. Display set window surface
  108. Using Quantization Range for CMU
  109.  
  110. DSI PAD calibration done
  111. Display initialization Done
  112. TSEC OTF key generation process started
  113. NvDdkExtGpioKeyboardInit: Gpio expander keyboard structure not found!
  114. NvDdkKeyboardInit: Gpio keyboard is initialised
  115. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  116. Checking for android ota recovery
  117. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  118. Display BMP image
  119. Display BMP image done
  120. Cold-booting Linux
  121. Platform Pre OS Boot configuration...
  122. dts_overrides() ++
  123. dts_overrides() Original DTS size 72558
  124. TegraNctInit: nct_ptr = 0xfdb00000
  125. TegraNctInit: magic(0x7443566e),vid(0x955),pid(0x1001),ver(V1.0),rev(39)
  126. dts_override_by_compatible: Override failed for ti,palmas-watchdog.
  127. dts_override_debug_console: Debug console and SQA Automation port: UARTD
  128. dts_override_based_on_odm_data: No node name for offset 0
  129. FastbootAddAtag: setting ATAG (1413545985)
  130. OTF key is successfully generated and Unencrypted key is written to VDE
  131. NvTsecKeyEncryption: entry
  132. NvInitKeyEncryption: entry
  133. TsecInit: entry: MemSize=1700
  134. KeyEncryption: entry
  135. KeyEncryption: exit
  136. NvInitKeyEncryption: exit
  137. NvTsecKeyEncryption: exit
  138. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  139. mem=2010M@2048M
  140. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  141. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  142. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  143. The proc BoardInfo: 0x0177:0x0000:0x03:0x00:0x00
  144. FastbootAddAtag: setting ATAG (0)
  145.  
  146. Board Id Read Time: 0 us
  147. Power Rail enable Time: 1 us
  148.  
  149. Miscellaneous avp time: 442197 us
  150. Bootloader (AosInit) time: 2449 us
  151. Bootloader Main Init time: 331653 us
  152. BlockDevMgrInit time: 3493 us
  153. PartMgrInit time: 2 us
  154. StorMgrInit time: 4 us
  155. FsMgrInit time: 1 us
  156. Partition Table load: 100611 us
  157. Display init time: 128208 us
  158. Kernel read time: 237 msec
  159. Load Kernel Size: 10719232 Bytes
  160. Bl Kernel ReadSpeed: 45228000 Bytes/sec
  161. Pre-Kernel Jump time: 2376636 us
  162. Jumping to kernel at (time stamp): 4916047 us
  163. [ 0.000000] Booting Linux on physical CPU 0x0
  164. [ 0.000000] Initializing cgroup subsys cpu
  165. [ 0.000000] Initializing cgroup subsys cpuacct
  166. [ 0.000000] Linux version 3.10.96+ (jetson@androidtv-mobile) (gcc version 4.7
  167. [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=30c7387d
  168. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  169. [ 0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM374, serial: 0
  170. [ 0.000000] Found tsec, start=0xfe000000 size=2000000
  171. [ 0.000000] Found tegra_fbmem: 011a0000@ad012000
  172. [ 0.000000] Reserved memory: initialized node iram-carveout, compatible id nt
  173. [ 0.000000] Tegra reserved memory:
  174. [ 0.000000] LP0: fdaff000 - fdafffff
  175. [ 0.000000] Bootloader framebuffer: ad012000 - ae1b1fff
  176. [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000
  177. [ 0.000000] Framebuffer: 00000000 - 00000000
  178. [ 0.000000] 2nd Framebuffer: 00000000 - 00000000
  179. [ 0.000000] Carveout: 00000000 - 00000000
  180. [ 0.000000] Vpr: 00000000 - 0b9fffff
  181. [ 0.000000] Tsec: fe000000 - ffffffff
  182. [ 0.000000] Bootloader Debug Data: 00000000 - 00000000
  183. [ 0.000000] Nck: fdb00000 - fdbfffff
  184. [ 0.000000] cma: CMA: reserved 188 MiB at f1c00000
  185. [ 0.000000] cma: CMA: reserved 16 MiB at ab400000
  186. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  187. [ 0.000000] DTS File Name: /home/jetson/nvidia/shield/kernel/arch/arm/boot/ds
  188. [ 0.000000] DTB Build time: <unknown>
  189. [ 0.000000] Tegra12: CPU Speedo value 2126, Soc Speedo value 2034, Gpu Speed4
  190. [ 0.000000] Tegra12: CPU Speedo ID 5, Soc Speedo ID 0, Gpu Speedo ID 1
  191. [ 0.000000] Tegra12: CPU Process ID 0,Soc Process ID 0,Gpu Process ID 0
  192. [ 0.000000] Tegra Revision: A01 SKU: 0x87 CPU Process: 0 Core Process: 0 Boo0
  193. [ 0.000000] tegra: PLLP fixed rate: 408000000
  194. [ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON
  195. [ 0.000000] tegra_clk_shared_bus_user_init: c3bus client tsec left ON
  196. [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1044000000
  197. [ 0.000000] Lowering sbus maximum rate from 420000000 to 372000000
  198. [ 0.000000] Lowering vic03 maximum rate from 900000000 to 756000000
  199. [ 0.000000] Lowering tsec maximum rate from 900000000 to 756000000
  200. [ 0.000000] Lowering msenc maximum rate from 600000000 to 480000000
  201. [ 0.000000] Lowering se maximum rate from 600000000 to 480000000
  202. [ 0.000000] Lowering vde maximum rate from 600000000 to 480000000
  203. [ 0.000000] Lowering host1x maximum rate from 500000000 to 408000000
  204. [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000
  205. [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000
  206. [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000
  207. [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
  208. [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000
  209. [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000
  210. [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000
  211. [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000
  212. [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000
  213. [ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000
  214. [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2218500000
  215. [ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
  216. [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
  217. [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
  218. [ 0.000000] Switching to timer-based delay loop
  219. [ 0.000000] Tegra reset control registration success
  220. [ 0.000000] tegra_powergate_init: DONE
  221. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c36b1000 s14464 r8192 d14208 u36864
  222. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  223. [ 0.000000] Kernel command line: androidboot.security=unlocked tegraid=40.1.)
  224. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  225. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  226. [ 0.000000] Memory: 2008MB = 2008MB total
  227. [ 0.000000] Memory: 1788004k/1788004k available, 270236k reserved, 1120640K m
  228. [ 0.000000] Virtual kernel memory layout:
  229. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  230. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  231. [ 0.000000] vmalloc : 0xec800000 - 0xff000000 ( 296 MB)
  232. [ 0.000000] lowmem : 0xc0000000 - 0xec400000 ( 708 MB)
  233. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  234. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  235. [ 0.000000] .text : 0xc0008000 - 0xc11bc028 (18129 kB)
  236. [ 0.000000] .init : 0xc11bd000 - 0xc1266880 ( 679 kB)
  237. [ 0.000000] .data : 0xc1268000 - 0xc141a91c (1739 kB)
  238. [ 0.000000] .bss : 0xc141d090 - 0xc15f68fc (1895 kB)
  239. [ 0.000000] Preemptible hierarchical RCU implementation.
  240. [ 0.000000] NR_IRQS:704
  241. [ 0.000000] the number of interrupt controllers found is 5
  242. [ 0.000000] of_clk_get_from_provider: tegra clock 5 not found
  243. [ 0.000000] Architected local timer running at 12.00MHz (phys).
  244. [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863s
  245. [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay
  246. [ 0.000350] Calibrating delay loop (skipped), value calculated using timer f0
  247. [ 0.000367] pid_max: default: 32768 minimum: 301
  248. [ 0.000568] Security Framework initialized
  249. [ 0.000594] SELinux: Initializing.
  250. [ 0.000751] Mount-cache hash table entries: 512
  251. [ 0.025865] Initializing cgroup subsys debug
  252. [ 0.025881] Initializing cgroup subsys freezer
  253. [ 0.025932] CPU: Testing write buffer coherency: ok
  254. [ 0.025972] ftrace: allocating 43631 entries in 86 pages
  255. [ 0.082553] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  256. [ 0.082825] psci: probing for conduit method from DT.
  257. [ 0.082838] psci: PSCIv0.2 detected in firmware.
  258. [ 0.082845] psci: Using standard PSCI v0.2 function IDs
  259. [ 0.082863] Setting up static identity map for 0xc0cb16f0 - 0xc0cb1794
  260. [ 0.082904] tegra_nct_init: magic(0x7443566e),vid(0x955),pid(0x1001),ver(V1.)
  261. [ 0.086521] ftrace: Allocated trace_printk buffers
  262. [ 0.097280] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  263. [ 0.100278] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  264. [ 0.103328] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  265. [ 0.103535] Brought up 4 CPUs
  266. [ 0.103555] SMP: Total of 4 processors activated.
  267. [ 0.103563] CPU: All CPU(s) started in SVC mode.
  268. [ 0.115256] VFP support v0.3: implementor 41 architecture 4 part 30 variant 0
  269. [ 0.117866] pinctrl core: initialized pinctrl subsystem
  270. [ 0.118224] regulator-dummy: ; Rail ON
  271. [ 0.122816] Initializing plugin-manager
  272. [ 0.122934] Plugin-manager not available
  273. [ 0.123014] Adding domain nvavp-pd to PM domain mc-clk-pd
  274. [ 0.124982] NET: Registered protocol family 16
  275. [ 0.129484] DMA: preallocated 256 KiB pool for atomic coherent allocations
  276. [ 0.130212] console [pstore-1] enabled
  277. [ 0.130333] ramoops: attached 0x200000@0xfd800000, ecc: 0/0
  278. [ 0.130627] I2C first dynamic bus number based on alias = 6
  279. [ 0.130694] cpuidle: using governor ladder
  280. [ 0.130705] cpuidle: using governor menu
  281. [ 0.131238] PMC: Setting PMIC interrupt active-high
  282. [ 0.131787] tegra-pmc device create success
  283. [ 0.136721] ardbeg_camera_auxdata: update camera lookup table.
  284. [ 0.136952] platform nvavp-pd.1: SMMU isn't ready yet
  285. [ 0.138983] mapped MMIO address: 0xfdc19000 -> 0x70019000
  286. [ 0.147645] tegra124-pinctrl 70000868.pinmux: Probed Tegra pinctrl driver
  287. [ 0.148381] GPIO chip tegra-gpio: created GPIO range 0->250 ==> 70000868.pin0
  288. [ 0.148822] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
  289. [ 0.148893] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
  290. [ 0.150000] platform tegra12-se: SMMU isn't ready yet
  291. [ 0.150681] platform nvavp-pd.1: domain=ea7ccb50 allocates as[0]=ea7e8064
  292. [ 0.150908] platform tegra12-se: domain=ea7cc9d0 allocates as[0]=ea7e80a4
  293. [ 0.150979] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
  294. [ 0.158630] Wake16 for irq=34
  295. [ 0.160716] platform tegradc.0: domain=ea7dd3d0 allocates as[0]=ea7e80e4
  296. [ 0.167332] platform tegradc.0: IOVA linear map 0x00000000ad012000(11a0000)
  297. [ 0.167588] platform tegradc.0: IOVA linear map 0x00000000f1c00000(bc00000)
  298. [ 0.169313] platform gk20a.0: domain=ea7e4690 allocates as[0]=ea7e8124
  299. [ 0.169549] Wake58 for irq=81
  300. [ 0.169589] Wake41 for irq=129
  301. [ 0.169600] Wake43 for irq=129
  302. [ 0.169639] Wake40 for irq=53
  303. [ 0.169649] Wake42 for irq=53
  304. [ 0.174892] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x03:0x44:0x00
  305. [ 0.174969] display board info: id 0x705, fab 0x0
  306. [ 0.175232] panel_select fail by _node_status
  307. [ 0.175475] platform tegra-otg: domain=ea01e850 allocates as[0]=ea7e8164
  308. [ 0.175864] ardbeg_modem_init: modem_id = 0
  309. [ 0.177625] /chosen/nvidia,debug-console-over-sd read failed: -22
  310. [ 0.177777] platform sdhci-tegra.2: domain=ea06afd0 allocates as[0]=ea7e81a4
  311. [ 0.178741] Clear bootloader IO dpd settings
  312. [ 0.178935] Loading jetson TK1 EMC tables.
  313. [ 0.179190] tegra: pll_m is selected as scalable EMC clock source
  314. [ 0.179222] Lowering emc maximum rate from 1200000000 to 924000000
  315. [ 0.179240] tegra: validated EMC DFS table
  316. [ 0.179477] swapper/0 isomgr_init(): iso emc max clk=924000KHz
  317. [ 0.179489] swapper/0 isomgr_init(): max_iso_bw=7392000KB
  318. [ 0.179760] ardbeg_touch_init init raydium touch
  319. [ 0.179893] Raydium - touch platform_id : 8
  320. [ 0.179998] soctherm THERMTRIP not supported on PMU (BOARD_P1734)
  321. [ 0.180010] tegra_soctherm_init: initializing soctherm using deprecated API
  322. [ 0.180029] vdso32: 2 pages (1 code, 1 data) at base c141c000
  323. [ 0.180064] hw-breakpoint: Debug register access (0xee003e17) caused undefin0
  324. [ 0.180070] hw-breakpoint: Debug register access (0xee003e17) caused undefin2
  325. [ 0.180075] hw-breakpoint: Debug register access (0xee003e17) caused undefin3
  326. [ 0.180080] hw-breakpoint: CPU 2 failed to disable vector catch
  327. [ 0.180114] hw-breakpoint: Debug register access (0xee003e17) caused undefin1
  328. [ 0.181442] [TLK] starting platform early init (TLK built: Feb 16 2017 21:15)
  329. [ 0.181454] [TLK] NS PHYS buffer support available
  330. [ 0.181466] [TLK] [crypto_service] Setup_keys: KEYBOX READ ERROR: unexpected1
  331. [ 0.181477] [TLK] [secure_otf] te_register_ta_event_handler: registering ta 2
  332. [ 0.181488] [TLK] [crypto_service] No data in keybox entry 7
  333. [ 0.181498] [TLK] [crypto_service] get_keybox: key lookup failed
  334. [ 0.181509] [TLK] [hdcp_service] ote_nvcrypto_get_keybox:96 failed with err )
  335. [ 0.181519] [TLK] [hdcp_service] dataUnwrap CRYPTO_SERVICE_GET_KEYBOX failed
  336. [ 0.181530] [TLK] [hdcp_service] decrypt_hdcp2_rx_key Error : cannot unwrap ]
  337. [ 0.181692] nvdumper: not configured
  338. [ 0.182023] Tegra restart notifier registered.
  339. [ 0.204891] bio: create slab <bio-0> at 0
  340. [ 0.207363] reg-fixed-voltage 1.regulator: Consumer c1 does not have device e
  341. [ 0.207383] reg-fixed-voltage 1.regulator: Consumer c2 does not have device e
  342. [ 0.207498] +V3.3_MXM: 3300 mV ; Rail ON
  343. [ 0.207671] reg-fixed-voltage 2.regulator: Consumer c7 does not have device e
  344. [ 0.207688] reg-fixed-voltage 2.regulator: Consumer c8 does not have device e
  345. [ 0.207709] reg-fixed-voltage 2.regulator: Consumer c11 does not have devicee
  346. [ 0.207732] reg-fixed-voltage 2.regulator: Consumer c15 does not have devicee
  347. [ 0.207746] reg-fixed-voltage 2.regulator: Consumer c16 does not have devicee
  348. [ 0.207760] reg-fixed-voltage 2.regulator: Consumer c17 does not have devicee
  349. [ 0.207791] reg-fixed-voltage 2.regulator: Consumer c18 does not have devicee
  350. [ 0.207894] reg-3v3: 3300 mV ; Rail ON
  351. [ 0.209646] vgaarb: loaded
  352. [ 0.210292] SCSI subsystem initialized
  353. [ 0.210676] usbcore: registered new interface driver usbfs
  354. [ 0.210735] usbcore: registered new interface driver hub
  355. [ 0.210856] usbcore: registered new device driver usb
  356. [ 0.213029] Wake18 for irq=118
  357. [ 0.214208] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x05
  358. [ 0.214226] as3722 4-0040: Device version 1V1 and platform version 1V2
  359. [ 0.214239] as3722 4-0040: Final OTP version 1V2
  360. [ 0.215157] Wake18 for irq=118
  361. [ 0.218655] gpiochip_add: registered GPIOs 1016 to 1023 on device: as3722-gpo
  362. [ 0.218678] GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctr7
  363. [ 0.218903] as3722-regulator as3722-regulator.0: Consumer c1 does not have de
  364. [ 0.218969] as3722-regulator as3722-regulator.0: Consumer c1 does not have de
  365. [ 0.219030] as3722-regulator as3722-regulator.0: Consumer c1 does not have de
  366. [ 0.219046] as3722-regulator as3722-regulator.0: Consumer c2 does not have de
  367. [ 0.219062] as3722-regulator as3722-regulator.0: Consumer c3 does not have de
  368. [ 0.219077] as3722-regulator as3722-regulator.0: Consumer c4 does not have de
  369. [ 0.219131] as3722-regulator as3722-regulator.0: Consumer c5 does not have de
  370. [ 0.219146] as3722-regulator as3722-regulator.0: Consumer c6 does not have de
  371. [ 0.219161] as3722-regulator as3722-regulator.0: Consumer c7 does not have de
  372. [ 0.219250] as3722-regulator as3722-regulator.0: Consumer c1 does not have de
  373. [ 0.219276] as3722-regulator as3722-regulator.0: Consumer c2 does not have de
  374. [ 0.219290] as3722-regulator as3722-regulator.0: Consumer c3 does not have de
  375. [ 0.219304] as3722-regulator as3722-regulator.0: Consumer c4 does not have de
  376. [ 0.219319] as3722-regulator as3722-regulator.0: Consumer c5 does not have de
  377. [ 0.219339] as3722-regulator as3722-regulator.0: Consumer c7 does not have de
  378. [ 0.219353] as3722-regulator as3722-regulator.0: Consumer c8 does not have de
  379. [ 0.219368] as3722-regulator as3722-regulator.0: Consumer c9 does not have de
  380. [ 0.219383] as3722-regulator as3722-regulator.0: Consumer c10 does not have e
  381. [ 0.219398] as3722-regulator as3722-regulator.0: Consumer c11 does not have e
  382. [ 0.219413] as3722-regulator as3722-regulator.0: Consumer c12 does not have e
  383. [ 0.219427] as3722-regulator as3722-regulator.0: Consumer c13 does not have e
  384. [ 0.219442] as3722-regulator as3722-regulator.0: Consumer c14 does not have e
  385. [ 0.219461] as3722-regulator as3722-regulator.0: Consumer c15 does not have e
  386. [ 0.219477] as3722-regulator as3722-regulator.0: Consumer c16 does not have e
  387. [ 0.219502] as3722-regulator as3722-regulator.0: Consumer c19 does not have e
  388. [ 0.219517] as3722-regulator as3722-regulator.0: Consumer c20 does not have e
  389. [ 0.219545] as3722-regulator as3722-regulator.0: Consumer c21 does not have e
  390. [ 0.219559] as3722-regulator as3722-regulator.0: Consumer c22 does not have e
  391. [ 0.219629] as3722-regulator as3722-regulator.0: Consumer c1 does not have de
  392. [ 0.219644] as3722-regulator as3722-regulator.0: Consumer c2 does not have de
  393. [ 0.219693] as3722-regulator as3722-regulator.0: Consumer c1 does not have de
  394. [ 0.219707] as3722-regulator as3722-regulator.0: Consumer c2 does not have de
  395. [ 0.219723] as3722-regulator as3722-regulator.0: Consumer c3 does not have de
  396. [ 0.219741] as3722-regulator as3722-regulator.0: Consumer c4 does not have de
  397. [ 0.219762] as3722-regulator as3722-regulator.0: Consumer c5 does not have de
  398. [ 0.219777] as3722-regulator as3722-regulator.0: Consumer c6 does not have de
  399. [ 0.219793] as3722-regulator as3722-regulator.0: Consumer c7 does not have de
  400. [ 0.219818] as3722-regulator as3722-regulator.0: Consumer c8 does not have de
  401. [ 0.219833] as3722-regulator as3722-regulator.0: Consumer c9 does not have de
  402. [ 0.219890] as3722-regulator as3722-regulator.0: Consumer c2 does not have de
  403. [ 0.219960] as3722-regulator as3722-regulator.0: Consumer c8 does not have de
  404. [ 0.219974] as3722-regulator as3722-regulator.0: Consumer c9 does not have d
  405. [ 0.262537] usb1-usb2-vbus: 5000 mV ; Rail OFFavdd-pll-pexory domainot have e
  406. [ 0.220014] as3722-regulator as3722-regulator.0: Consumer c12 does not have e
  407. [ 0.220068] as3722-regulator as3722-regulator.0: Consumer c1 does not have de
  408. [ 0.220119] as3722-regulator as3722-regulator.0: Consumer c1 does not have de
  409. [ 0.220133] as3722-regulator as3722-regulator.0: Consumer c2 does not have de
  410. [ 0.220148] as3722-regulator as3722-regulator.0: Consumer c3 does not have de
  411. [ 0.220188] as3722-regulator as3722-regulator.0: Consumer c2 does not have de
  412. [ 0.221686] +VDD_CPU_AP: 650 <--> 1300 mV at 800 mV 3500 mA ; Rail ON
  413. [ 0.223203] +VDD_CORE: applied init 1150000uV constraint
  414. [ 0.224373] +VDD_CORE: 700 <--> 1350 mV at 1150 mV 3500 mA ; Rail ON
  415. [ 0.227067] +V1.35_VDDIO_DDR(sd2): 1350 mV ; Rail ON
  416. [ 0.227805] as3722-sd3: ; Rail ON
  417. [ 0.229352] avdd-pll-pex: 1050 mV ; Rail ON
  418. [ 0.231151] +V1.8: 1800 mV ; Rail ON
  419. [ 0.232402] +VDD_GPU_AP: applied init 1000000uV constraint
  420. [ 0.234113] +VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA ; Rail ON
  421. [ 0.235130] +V1.05_AVDD: 1050 mV at 300 mA ; Rail ON
  422. [ 0.236936] VDDIO_SDMMC1: 1800 <--> 3300 mV at 150 mA ; Rail ON
  423. [ 0.239052] +V1.2: 1200 mV at 150 mA ; Rail ON
  424. [ 0.241881] +V1.05_RTC: 1000 mV at 150 mA ; Rail ON
  425. [ 0.243330] AVDD_LVDS0_PLL: applied init 1800000uV constraint
  426. [ 0.244164] AVDD_LVDS0_PLL: 1800 <--> 3300 mV at 1800 mV at 150 mA ; Rail ON
  427. [ 0.245193] as3722-ldo5: at 150 mA ; Rail ON
  428. [ 0.246218] VDDIO_SDMMC3: 1800 <--> 3300 mV at 150 mA ; Rail ON
  429. [ 0.247515] as3722-ldo7: at 150 mA ; Rail ON
  430. [ 0.249683] +V3.3_ETH(ldo9): 3300 mV at 150 mA ; Rail ON
  431. [ 0.251670] +V3.3_ETH(ldo10): 3300 mV at 150 mA ; Rail ON
  432. [ 0.253413] +V1.8_VPP_FUSE: 1800 mV at 150 mA ; Rail ON
  433. [ 0.255537] media: Linux media interface: v0.10
  434. [ 0.255617] Linux video capture interface: v2.00
  435. [ 0.255720] pps_core: LinuxPPS API ver. 1 registered
  436. [ 0.255731] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
  437. [ 0.255764] PTP clock support registered
  438. [ 0.256438] tegra_wdt 60005100.watchdog: tegra_wdt_probe done
  439. [ 0.258449] Advanced Linux Sound Architecture Driver Initialized.
  440. [ 0.259012] Bluetooth: Core ver 2.16
  441. [ 0.259096] NET: Registered protocol family 31
  442. [ 0.259116] Bluetooth: HCI device and connection manager initialized
  443. [ 0.259138] Bluetooth: HCI socket layer initialized
  444. 2808] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name
  445. [ 0.262834] reg-fixed-sync-voltage 7.regulator: Consumer c2 does not have device name
  446. [ 0.263041] BKL1_ON: 3300 mV ; Rail OFF
  447. [ 0.268676] Switching to clocksource arch_sys_counter
  448. [ 0.328136] FS-Cache: Loaded
  449. [ 0.328223] nvmap_heap_init: nvmap_heap_init: created heap block cache
  450. [ 0.328455] tegra-carveouts tegra-carveouts.17: iram :dma coherent mem declare 0x0000000040001000,258048
  451. [ 0.328491] tegra-carveouts tegra-carveouts.17: assigned reserved memory node iram-carveout
  452. [ 0.328514] dma_declare_coherent_resizable_cma_memory:278: resizable heap=vpr, base=0x0x00000000f1c00000, size=0xbc00000
  453. [ 0.328546] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (6) rem_chunk_size(0x1c00000)
  454. [ 0.328845] cma: enabled page replacement for spfn=f1c00, epfn=fd800
  455. [ 0.328867] dma_declare_coherent_resizable_cma_memory:325: resizable cma heap=vpr create successful
  456. [ 0.328880] nvmap_page_pool_init: Total RAM pages: 499225
  457. [ 0.328894] nvmap_page_pool_init: nvmap page pool size: 62403 pages (243 MB)
  458. [ 0.328996] nvmap_background_zero_thread: PP zeroing thread starting.
  459. [ 0.329945] misc nvmap: created heap iram base 0x40001000 size (252KiB)
  460. [ 0.330706] misc nvmap: created heap vpr base 0xf1c00000 size (192512KiB)
  461. [ 0.331021] nvmap:inner cache maint threshold=1048576
  462. [ 0.333215] Wake39 for irq=52
  463. [ 0.333717] tegra-otg tegra-otg: otg transceiver registered
  464. [ 0.334374] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type therm_est
  465. [ 0.336403] regulator_get() failed for (power-detect.24,pwrdet-nand), -19
  466. [ 0.336421] tegra-pwr-detect power-detect.24: regulator pwrdet-nand not found: -19
  467. [ 0.336435] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-nand failed: -19
  468. [ 0.336482] regulator_get() failed for (power-detect.24,pwrdet-uart), -19
  469. [ 0.336503] tegra-pwr-detect power-detect.24: regulator pwrdet-uart not found: -19
  470. [ 0.336531] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-uart failed: -19
  471. [ 0.336558] regulator_get() failed for (power-detect.24,pwrdet-bb), -19
  472. [ 0.336574] tegra-pwr-detect power-detect.24: regulator pwrdet-bb not found: -19
  473. [ 0.336587] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-bb failed: -19
  474. [ 0.336608] regulator_get() failed for (power-detect.24,pwrdet-audio), -19
  475. [ 0.336630] tegra-pwr-detect power-detect.24: regulator pwrdet-audio not found: -19
  476. [ 0.336644] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-audio failed: -19
  477. [ 0.336664] regulator_get() failed for (power-detect.24,pwrdet-mipi), -19
  478. [ 0.336678] tegra-pwr-detect power-detect.24: regulator pwrdet-mipi not found: -19
  479. [ 0.336690] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-mipi failed: -19
  480. [ 0.336711] regulator_get() failed for (power-detect.24,pwrdet-cam), -19
  481. [ 0.336724] tegra-pwr-detect power-detect.24: regulator pwrdet-cam not found: -19
  482. [ 0.336775] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-cam failed: -19
  483. [ 0.336901] tegra-pwr-detect power-detect.24: Rail pwrdet-pex-ctl is having fixed voltage 1050000
  484. [ 0.337426] regulator_get() failed for (power-detect.24,pwrdet-sdmmc1), -19
  485. [ 0.337448] tegra-pwr-detect power-detect.24: regulator pwrdet-sdmmc1 not found: -19
  486. [ 0.337462] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-sdmmc1 failed: -19
  487. [ 0.337483] regulator_get() failed for (power-detect.24,pwrdet-sdmmc3), -19
  488. [ 0.337507] tegra-pwr-detect power-detect.24: regulator pwrdet-sdmmc3 not found: -19
  489. [ 0.337520] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-sdmmc3 failed: -19
  490. [ 0.337541] regulator_get() failed for (power-detect.24,pwrdet-sdmmc4), -19
  491. [ 0.337554] tegra-pwr-detect power-detect.24: regulator pwrdet-sdmmc4 not found: -19
  492. [ 0.337567] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-sdmmc4 failed: -19
  493. [ 0.337589] regulator_get() failed for (power-detect.24,pwrdet-hv), -19
  494. [ 0.337602] tegra-pwr-detect power-detect.24: regulator pwrdet-hv not found: -19
  495. [ 0.337615] tegra-pwr-detect power-detect.24: regulator to power detect cell map pwrdet-hv failed: -19
  496. [ 0.337646] tegra-pwr-detect power-detect.24: Failed regulators mapping - io power detection is left always on
  497. [ 0.338028] NET: Registered protocol family 2
  498. [ 0.339152] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  499. [ 0.339384] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  500. [ 0.339593] TCP: Hash tables configured (established 8192 bind 8192)
  501. [ 0.339642] TCP: reno registered
  502. [ 0.339678] UDP hash table entries: 512 (order: 2, 16384 bytes)
  503. [ 0.339763] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  504. [ 0.340133] NET: Registered protocol family 1
  505. [ 0.340614] RPC: Registered named UNIX socket transport module.
  506. [ 0.340637] RPC: Registered udp transport module.
  507. [ 0.340649] RPC: Registered tcp transport module.
  508. [ 0.340659] RPC: Registered tcp NFSv4.1 backchannel transport module.
  509. [ 0.341143] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
  510. [ 0.341914] Unpacking initramfs...
  511. [ 0.450421] Freeing initrd memory: 1328K (c2580000 - c26cc000)
  512. [ 0.450479] Adding domain host1x-pd to PM domain mc-clk-pd
  513. [ 0.458400] host1x host1x: initialized
  514. [ 0.462557] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
  515. [ 0.465060] audit: initializing netlink socket (disabled)
  516. [ 0.465111] type=2000 audit(0.433:1): initialized
  517. [ 0.466178] bounce pool size: 64 pages
  518. [ 0.468575] NTFS driver 2.1.30 [Flags: R/O].
  519. [ 0.468717] fuse init (API version 7.22)
  520. [ 0.472828] io scheduler noop registered (default)
  521. [ 0.474555] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
  522. [ 0.475771] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes and lane map as 0x14
  523. [ 0.477838] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes and lane map as 0x14
  524. [ 1.211243] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
  525. [ 1.923448] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
  526. [ 2.635451] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
  527. [ 2.637494] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
  528. [ 3.347206] tegra-pcie 1003000.pcie-controller: link 1 down, retrying
  529. [ 4.059173] tegra-pcie 1003000.pcie-controller: link 1 down, retrying
  530. [ 4.769761] tegra-pcie 1003000.pcie-controller: link 1 down, retrying
  531. [ 4.771810] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
  532. [ 4.771828] tegra-pcie 1003000.pcie-controller: PCIE: no ports detected
  533. [ 4.772119] tegra-pcie 1003000.pcie-controller: PCIE: Disable power rails
  534. [ 4.773547] no avaiable target backlight node
  535. [ 4.773689] fail to parse max-brightness
  536. [ 4.773707] pwm-backlight pwm-backlight: fail to find platform data
  537. [ 4.773757] pwm-backlight: probe of pwm-backlight failed with error -22
  538. [ 4.773843] Adding domain tsec-pd to PM domain host1x-pd
  539. [ 4.836341] tsec tsec: initialized
  540. [ 4.836932] Adding domain vic03-pd to PM domain host1x-pd
  541. [ 4.836962] Adding domain msenc-pd to PM domain host1x-pd
  542. [ 4.839669] falcon vic03.0: initialized
  543. [ 4.840896] falcon msenc: initialized
  544. [ 4.841954] tegradc tegradc.0: Display dc.54200000 registered with id=0
  545. [ 4.841973] of_dc_parse_platform_data: No dc-or-node is defined in DT
  546. [ 4.842030] display board info: id 0x705, fab 0x0
  547. [ 4.842275] panel_select fail by _node_status
  548. [ 4.842365] display board info: id 0x705, fab 0x0
  549. [ 4.842599] panel_select fail by _node_status
  550. [ 4.842836] of_dc_parse_platform_data: could not find vrr-settings node
  551. [ 4.842847] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present
  552. [ 4.842859] of_dc_parse_platform_data: could not find SD settings node
  553. [ 4.842874] of_dc_parse_platform_data: could not find cmu node
  554. [ 4.842886] of_dc_parse_platform_data: could not find cmu node for adobeRGB
  555. [ 4.842917] tegradc tegradc.0: DT parsed successfully
  556. [ 4.848404] display board info: id 0x705, fab 0x0
  557. [ 4.848643] panel_select fail by _node_status
  558. [ 4.849281] nvhdcp: using "always on" policy.
  559. [ 4.849443] gpio wake4 for gpio=111
  560. [ 4.855498] tegradc tegradc.0: nominal-pclk:148500000 parent:594000000 div:4.0 pclk:148500000 147015000~161865000
  561. [ 4.857474] tegradc tegradc.0: probed
  562. [ 4.956770] nvhdcp: Error: hdmi hpd disconnect
  563. [ 4.956787] nvhdcp: Error: Bcaps read failure
  564. [ 4.956800] nvhdcp: Error: nvhdcp failure - renegotiating in 1 second
  565. [ 5.104943] tegradc tegradc.0: fb registered
  566. [ 5.104988] hdmi_state_machine_worker (tid ea7525c0): state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1
  567. [ 5.105006] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug)
  568. [ 5.109678] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
  569. [ 5.110505] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  570. [ 5.112167] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
  571. [ 5.150698] hdmi_state_machine_worker (tid ea7525c0): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
  572. [ 5.150705] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
  573. [ 5.226113] hdmi_state_machine_worker (tid ea7525c0): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
  574. [ 5.257446] panel size 52 by 29
  575. [ 5.257507] handle_check_edid_l: audio_switch 1
  576. [ 5.257524] Display connected, hpd_switch 1
  577. [ 5.257529] handle_check_edid_l: setting audio and infoframes
  578. [ 5.257781] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
  579. [ 6.178785] nvhdcp: link verified!
  580. [ 7.835332] console [ttyS0] enabled
  581. [ 7.839702] 70006000.serial: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA
  582. [ 7.847773] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
  583. [ 7.855820] serial-tegra 70006200.serial: RX in PIO mode
  584. [ 7.861174] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
  585. [ 7.869526] Adding domain gpu-pd to PM domain host1x-pd
  586. [ 7.912536] loop: module loaded
  587. [ 7.916185] zram: Created 1 device(s) ...
  588. [ 7.920334] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
  589. [ 7.928383] tegra_cec tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=35
  590. [ 7.935533] tegra_cec tegra_cec: tegra_cec_init started
  591. [ 7.940955] tegra_cec tegra_cec: cec_add_sysfs ret=0
  592. [ 7.945945] tegra_cec tegra_cec: probed
  593. [ 7.950863] tegra_profiler: Branch: Dev
  594. [ 7.954710] tegra_profiler: Version: 1.107
  595. [ 7.958820] tegra_profiler: Samples version: 36
  596. [ 7.963357] tegra_profiler: IO version: 20
  597. [ 7.967464] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
  598. [ 7.972787] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
  599. [ 7.978107] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
  600. [ 7.983428] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
  601. [ 7.988867] tegra_profiler: auth: init
  602. [ 7.994043] tun: Universal TUN/TAP device driver, 1.6
  603. [ 7.999115] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  604. [ 8.005373] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  605. [ 8.011474] e100: Copyright(c) 1999-2006 Intel Corporation
  606. [ 8.017030] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  607. [ 8.024094] e1000: Copyright (c) 1999-2006 Intel Corporation.
  608. [ 8.029908] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  609. [ 8.035761] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
  610. [ 8.041768] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
  611. [ 8.048909] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  612. [ 8.054679] PPP generic driver version 2.4.2
  613. [ 8.059063] PPP BSD Compression module registered
  614. [ 8.063784] PPP Deflate Compression module registered
  615. [ 8.068875] PPP MPPE Compression module registered
  616. [ 8.073677] NET: Registered protocol family 24
  617. [ 8.078389] usbcore: registered new interface driver r8152
  618. [ 8.083943] usbcore: registered new interface driver asix
  619. [ 8.089405] usbcore: registered new interface driver ax88179_178a
  620. [ 8.095552] usbcore: registered new interface driver cdc_ether
  621. [ 8.101461] usbcore: registered new interface driver smsc95xx
  622. [ 8.107292] usbcore: registered new interface driver cdc_subset
  623. [ 8.113294] usbcore: registered new interface driver cdc_ncm
  624. [ 8.118976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  625. [ 8.125864] tegra USB phy - inst[1] platform info:
  626. [ 8.130673] port_otg: no
  627. [ 8.133234] has_hostpc: yes
  628. [ 8.136039] phy_interface: USB_PHY_INTF_UTMI
  629. [ 8.140323] op_mode: TEGRA_USB_OPMODE_HOST
  630. [ 8.144428] qc2_voltage: 0
  631. [ 8.147143] hot_plug: disabled
  632. [ 8.150209] remote_wakeup: enabled
  633. [ 8.155282] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  634. [ 8.161230] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  635. [ 8.168925] Wake40 for irq=53
  636. [ 8.171891] Wake42 for irq=53
  637. [ 8.174901] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
  638. [ 8.186778] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10
  639. [ 8.192804] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  640. [ 8.199603] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  641. [ 8.206837] usb usb1: Product: Tegra EHCI Host Controller
  642. [ 8.212245] usb usb1: Manufacturer: Linux 3.10.96+ ehci_hcd
  643. [ 8.217830] usb usb1: SerialNumber: tegra-ehci.1
  644. [ 8.222878] hub 1-0:1.0: USB hub found
  645. [ 8.226663] hub 1-0:1.0: 1 port detected
  646. [ 8.231293] tegra USB phy - inst[2] platform info:
  647. [ 8.236102] port_otg: no
  648. [ 8.238649] has_hostpc: yes
  649. [ 8.241453] phy_interface: USB_PHY_INTF_UTMI
  650. [ 8.245741] op_mode: TEGRA_USB_OPMODE_HOST
  651. [ 8.249852] qc2_voltage: 0
  652. [ 8.252567] hot_plug: disabled
  653. [ 8.255631] remote_wakeup: enabled
  654. [ 8.260638] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  655. [ 8.266588] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
  656. [ 8.274269] Wake41 for irq=129
  657. [ 8.277322] Wake43 for irq=129
  658. [ 8.280418] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
  659. [ 8.291775] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10
  660. [ 8.297802] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  661. [ 8.304602] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  662. [ 8.311831] usb usb2: Product: Tegra EHCI Host Controller
  663. [ 8.317244] usb usb2: Manufacturer: Linux 3.10.96+ ehci_hcd
  664. [ 8.322835] usb usb2: SerialNumber: tegra-ehci.2
  665. [ 8.327864] hub 2-0:1.0: USB hub found
  666. [ 8.331706] hub 2-0:1.0: 1 port detected
  667. [ 8.336307] ehci-pci: EHCI PCI platform driver
  668. [ 8.341181] tegra_xusb_read_usb_calib: usb_calib0 = 0x02440389
  669. [ 8.347053] tegra_xhci_probe doesn't have any port enabled
  670. [ 8.352834] usbcore: registered new interface driver cdc_acm
  671. [ 8.358502] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  672. [ 8.366560] usbcore: registered new interface driver cdc_wdm
  673. [ 8.372308] usbcore: registered new interface driver usb-storage
  674. [ 8.378434] usbcore: registered new interface driver usbserial
  675. [ 8.384315] usbcore: registered new interface driver option
  676. [ 8.389934] usbserial: USB Serial support registered for GSM modem (1-port)
  677. [ 8.397025] usbcore: registered new interface driver pl2303
  678. [ 8.402631] usbserial: USB Serial support registered for pl2303
  679. [ 8.408619] usbcore: registered new interface driver modem_boot_hsic
  680. [ 8.415037] usbcore: registered new interface driver nvshieldled
  681. [ 8.421194] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
  682. [ 8.428874] tegra USB phy - inst[0] platform info:
  683. [ 8.433676] port_otg: yes
  684. [ 8.436352] has_hostpc: yes
  685. [ 8.439160] phy_interface: USB_PHY_INTF_UTMI
  686. [ 8.443437] op_mode: TEGRA_USB_OPMODE_DEVICE
  687. [ 8.447718] qc2_voltage: 0
  688. [ 8.450437] vbus_pmu_irq: 0
  689. [ 8.453249] charging: enabled
  690. [ 8.456225] remote_wakeup: disabled
  691. [ 8.462703] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
  692. [ 8.472915] usbcore: registered new interface driver xpad
  693. [ 8.483020] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0
  694. [ 8.489808] as3722-rtc as3722-rtc.1: RTC interrupt 449
  695. [ 8.500139] Wake16 for irq=34
  696. [ 8.503112] Enabling wake16
  697. [ 8.506604] tegra-rtc 7000e000.rtc: rtc core: registered tegra-rtc as rtc1
  698. [ 8.514292] i2c /dev entries driver
  699. [ 8.518708] IR NEC protocol handler initialized
  700. [ 8.522793] otg state changed: SUSPEND --> PERIPHERAL
  701. [ 8.528309] IR RC5(x) protocol handler initialized
  702. [ 8.533113] IR RC6 protocol handler initialized
  703. [ 8.537653] IR JVC protocol handler initialized
  704. [ 8.542195] IR Sony protocol handler initialized
  705. [ 8.546823] IR RC5 (streamzap) protocol handler initialized
  706. [ 8.552402] IR SANYO protocol handler initialized
  707. [ 8.557112] IR MCE Keyboard/mouse protocol handler initialized
  708. [ 8.562951] virtual_init
  709. [ 8.568010] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
  710. [ 8.574544] tegra_dtv_probe: probing dtv.
  711. [ 8.578650] setup_stream: bufsize = 4096, bufnum = 4
  712. [ 8.583994] ar0832_init: ++
  713. [ 8.587410] [IMX135] sensor driver loading
  714. [ 8.591567] [IMX179] sensor driver loading
  715. [ 8.595745] [imx132] sensor driver loading
  716. [ 8.599900] [ar0261] sensor driver loading
  717. [ 8.604141] ov7695 sensor driver loading
  718. [ 8.608120] mt9m114 sensor driver loading
  719. [ 8.612180] [ov10823] sensor driver loading
  720. [ 8.616633] usbcore: registered new interface driver uvcvideo
  721. [ 8.622388] USB Video Class driver (1.1.1)
  722. [ 8.626500] au0828 driver loaded
  723. [ 8.629799] usbcore: registered new interface driver au0828
  724. [ 8.635440] usbcore: registered new interface driver cx231xx
  725. [ 8.641106] cx231xx: Cx231xx dvb Extension initialized
  726. [ 8.646302] usbcore: registered new interface driver em28xx
  727. [ 8.651891] Em28xx: Initialized (Em28xx dvb Extension) extension
  728. [ 8.658690] ashmem: initialized
  729. [ 8.662513] ozwpan ozwpan: Ozmo Devices WPAN
  730. [ 8.666812] ozwpan ozwpan: new USB bus registered, assigned bus number 3
  731. [ 8.673602] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  732. [ 8.680401] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  733. [ 8.687633] usb usb3: Product: Ozmo Devices WPAN
  734. [ 8.692264] usb usb3: Manufacturer: Linux 3.10.96+ Ozmo WPAN
  735. [ 8.697935] usb usb3: SerialNumber: ozwpan
  736. [ 8.702417] hub 3-0:1.0: USB hub found
  737. [ 8.706200] hub 3-0:1.0: 4 ports detected
  738. [ 8.707809] usb 1-1: new full-speed USB device number 2 using tegra-ehci
  739. [ 8.719376] device-mapper: uevent: version 1.0.3
  740. [ 8.724147] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  741. [ 8.732766] Bluetooth: HCI UART driver ver 2.2
  742. [ 8.733211] usb 1-1: New USB device found, idVendor=0c45, idProduct=3451
  743. [ 8.733221] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  744. [ 8.733242] usb 1-1: Product: Airmouse
  745. [ 8.733250] usb 1-1: Manufacturer: AliTV Remote V1
  746. [ 8.759556] Bluetooth: HCI H4 protocol initialized
  747. [ 8.764438] usbcore: registered new interface driver bcm203x
  748. [ 8.770188] usbcore: registered new interface driver btusb
  749. [ 8.776039] sdhci: Secure Digital Host Controller Interface driver
  750. [ 8.782338] sdhci: Copyright(c) Pierre Ossman
  751. [ 8.786825] sdhci-pltfm: SDHCI platform and OF driver helper
  752. [ 8.793237] mmc0 using board files instead of DT
  753. [ 8.797990] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000
  754. [ 8.804983] sdhci-tegra sdhci-tegra.3: Parent select= pll_c rate=600000000
  755. [ 8.812819] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
  756. [ 8.823689] sdhci-tegra sdhci-tegra.3: Speedo value 2034
  757. [ 8.829050] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1150
  758. [ 8.838712] mmc0: no vqmmc regulator found
  759. [ 8.842855] mmc0: no vmmc regulator found
  760. [ 8.846878] mmc0: Invalid maximum block size, assuming 512 bytes
  761. [ 8.876776] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  762. [ 8.884314] mmc1 using board files instead of DT
  763. [ 8.888963] sdhci-tegra sdhci-tegra.2: Parent select= pll_p rate=408000000
  764. [ 8.895892] sdhci-tegra sdhci-tegra.2: Parent select= pll_c rate=600000000
  765. [ 8.903561] sdhci-tegra sdhci-tegra.2: Speedo value 2034
  766. [ 8.908920] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1150
  767. [ 8.918161] mmc1: no vqmmc regulator found
  768. [ 8.922306] mmc1: no vmmc regulator found
  769. [ 8.926347] mmc1: Invalid maximum block size, assuming 512 bytes
  770. [ 8.940773] tegra_cec tegra_cec: tegra_cec_init Done.
  771. [ 8.956783] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
  772. [ 8.958477] mmc0: BKOPS_EN bit is not set
  773. [ 8.964213] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data
  774. [ 8.964225] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found
  775. [ 8.980108] gpio wake56 for gpio=170
  776. [ 8.985879] tegra-se tegra12-se: tegra_se_probe: complete
  777. [ 8.992074] hidraw: raw HID events driver (C) Jiri Kosina
  778. [ 9.008255] input: AliTV Remote V1 Airmouse as /devices/platform/tegra-ehci.1/usb1/1-1/1-1:1.0/input/input0
  779. [ 9.018801] hid-generic 0003:0C45:3451.0001: input,hidraw0: USB HID v1.01 Keyboard [AliTV Remote V1 Airmouse] on usb-tegra-ehci.1-1/input0
  780. [ 9.034079] input: AliTV Remote V1 Airmouse as /devices/platform/tegra-ehci.1/usb1/1-1/1-1:1.1/input/input1
  781. [ 9.044562] hid-generic 0003:0C45:3451.0002: input,hidraw1: USB HID v1.01 Mouse [AliTV Remote V1 Airmouse] on usb-tegra-ehci.1-1/input1
  782. [ 9.059808] hid-generic 0003:0C45:3451.0003: hidraw2: USB HID v1.10 Device [AliTV Remote V1 Airmouse] on usb-tegra-ehci.1-1/input2
  783. [ 9.076402] input: AliTV Remote V1 Airmouse as /devices/platform/tegra-ehci.1/usb1/1-1/1-1:1.3/input/input2
  784. [ 9.086883] hid-generic 0003:0C45:3451.0004: input,hidraw3: USB HID v1.01 Gamepad [AliTV Remote V1 Airmouse] on usb-tegra-ehci.1-1/input3
  785. [ 9.099297] usbcore: registered new interface driver usbhid
  786. [ 9.104879] usbhid: USB HID core driver
  787. [ 9.108871] tegra_bootloader_debug: Created tegra_bootloader directory
  788. [ 9.115428] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_verify_regs in tegra_bootloader directory
  789. [ 9.126141] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_prof in tegra_bootloader directory
Advertisement
RAW Paste Data Copied
Advertisement