SHARE
TWEET

SinoVoip's Raspbian-Lite booting on Pine64+

a guest Jul 12th, 2016 241 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. HELLO! BOOT0 is starting!
  2. boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
  3.  
  4. boot0 version : 4.0.0
  5. set pll start
  6. set pll end
  7. rtc[0] value = 0x00000000
  8. rtc[1] value = 0x00000000
  9. rtc[2] value = 0x00000000
  10. rtc[3] value = 0x00000000
  11. rtc[4] value = 0x00000000
  12. rtc[5] value = 0x00000000
  13. DRAM driver version: V1.1
  14. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  15. PMU: AXP81X
  16. ddr voltage = 1500 mv
  17. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  18. DRAM clk = 672 MHz
  19. DRAM zq value: 003b3bbb
  20. DRAM single rank full DQ OK
  21. DRAM size = 1024 MB
  22. DRAM init ok
  23. dram size =1024
  24. card boot number = 0, boot0 copy = 0
  25. card no is 0
  26. sdcard 0 line count 4
  27. [mmc]: mmc driver ver 2015-05-08 20:06
  28. [mmc]: sdc0 spd mode error, 2
  29. [mmc]: Wrong media type 0x00000000
  30. [mmc]: ***Try SD card 0***
  31. [mmc]: HSSDR52/SDR25 4 bit
  32. [mmc]: 50000000 Hz
  33. [mmc]: 61056 MB
  34. [mmc]: ***SD/MMC 0 init OK!!!***
  35. sdcard 0 init ok
  36. The size of uboot is 000ec000.
  37. sum=e9f49cdd
  38. src_sum=e9f49cdd
  39. Succeed in loading uboot from sdmmc flash.
  40. boot0: start load other image
  41. boot0: Loading BL3-1
  42. Loading file 0 at address 0x40000000,size 0x00008400 success
  43. boot0: Loading scp
  44. Loading file 2 at address 0x00040000,size 0x00019c00 success
  45. set arisc reset to de-assert state
  46. Ready to disable icache.
  47. Jump to secend Boot.
  48.  
  49.  
  50. U-Boot 2014.07-4-pine64-00002-ga47674e (Jul 01 2016 - 21:49:10) Allwinner Technology
  51.  
  52. uboot commit : a47674ee9fb026349768eba6be8af9e0640c8a6c
  53.  
  54. rsb: secure monitor exist
  55. [      0.368]pmbus:   ready
  56. [      0.371][ARISC] :arisc initialize
  57. [      0.702][ARISC] :arisc_dvfs_cfg_vf_table: support only one vf_table
  58. [      0.818][ARISC] :sunxi-arisc driver startup succeeded
  59. [      0.851]PMU: AXP81X
  60. [      0.853]PMU: AXP81X found
  61. bat_vol=237, ratio=100
  62. [      0.859]PMU: dcdc2 1100
  63. [      0.863]PMU: cpux 1008 Mhz,AXI=336 Mhz
  64. PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz AHB2=300Mhz MBus=400Mhz
  65. device_type = 3253, onoff=1
  66. dcdc1_vol = 3300, onoff=1
  67. dcdc2_vol = 1100, onoff=1
  68. dcdc6_vol = 1100, onoff=1
  69. aldo1_vol = 2800, onoff=0
  70. aldo2_vol = 1800, onoff=1
  71. aldo3_vol = 3000, onoff=1
  72. dldo1_vol = 3300, onoff=0
  73. dldo2_vol = 3300, onoff=0
  74. dldo3_vol = 2800, onoff=0
  75. dldo4_vol = 3300, onoff=1
  76. eldo1_vol = 1800, onoff=1
  77. eldo2_vol = 1800, onoff=0
  78. eldo3_vol = 1800, onoff=0
  79. fldo1_vol = 1200, onoff=0
  80. fldo2_vol = 1100, onoff=1
  81. gpio0_vol = 3100, onoff=0
  82. vbus not exist
  83. no battery, limit to dc
  84. run key detect
  85. fel key not configed
  86. time out
  87. key not pressed anymore
  88. no uart input
  89. DRAM:  1008 MiB
  90. fdt addr: 0x76ebc0e0
  91. Relocation Offset is: 35f0e000
  92. In:    serial
  93. Out:   serial
  94. Err:   serial
  95. gic: sec monitor mode
  96. [     12.139]start
  97. drv_disp_init
  98. init_clocks: finish init_clocks.
  99. enable power vcc-hdmi-33, ret=0
  100. drv_disp_init finish
  101. boot_disp.output_disp=0
  102. boot_disp.output_type=3
  103. boot_disp.output_mode=10
  104. fetch script data boot_disp.auto_hpd fail
  105. disp0 device type(4) enable
  106. attched ok, mgr0<-->device1, type=4, mode=10
  107. [     12.494]end
  108. workmode = 0,storage type = 1
  109. [     12.498]MMC:        0
  110. [mmc]: mmc driver ver 2015-06-03 13:50:00
  111. SUNXI SD/MMC: 0
  112. [mmc]: start mmc_calibrate_delay_unit, don't access device...
  113. [mmc]: delay chain cal done, sample: 200(ps)
  114. [mmc]: media type 0x0
  115. [mmc]: Wrong media type 0x0
  116. [mmc]: ************Try SD card 0************
  117. [mmc]: host caps: 0x27
  118. [mmc]: MID 1b PSN 40300476
  119. [mmc]: PNM 00000 -- 0x30-30-30-30-30
  120. [mmc]: PRV 1.0
  121. [mmc]: MDT m-12 y-2015
  122. [mmc]: speed mode     : HSSDR52/SDR25
  123. [mmc]: clock          : 50000000 Hz
  124. [mmc]: bus_width      : 4 bit
  125. [mmc]: user capacity  : 61056 MB
  126. [mmc]: ************SD/MMC 0 init OK!!!************
  127. [mmc]: erase_grp_size      : 0x1WrBlk*0x200=0x200 Byte
  128. [mmc]: secure_feature      : 0x0
  129. [mmc]: secure_removal_type : 0x0
  130. [     12.686]sunxi flash init ok
  131. [mmc]: Has init
  132. [     12.719]---drivers/mmc/mmc.c 2733 mmc_init
  133. reading uboot.env
  134.  
  135. ** Unable to read "uboot.env" from mmc0:1 **
  136. Using default environment
  137.  
  138. --------fastboot partitions--------
  139. mbr not exist
  140. base bootcmd=run mmcbootcmd
  141. bootcmd set setargs_mmc
  142. key 1
  143. recovery key high 12, low 10
  144. fastboot key high 6, low 4
  145. no misc partition is found
  146. to be run cmd=run mmcbootcmd
  147. update dtb dram start
  148. update dtb dram  end
  149. serial is: 940051900800602b098b
  150. get Pine64 model from DRAM size
  151. DRAM >512M
  152. Pine64 model: pine64-plus
  153. no battery exist
  154. sunxi_bmp_logo_display
  155. ** Bad device size - sunxi_flash 0 **
  156. sunxi bmp info error : unable to open logo file bootlogo.bmp
  157. [     12.933]inter uboot shell
  158. Hit any key to stop autoboot:  0
  159. [mmc]: Has init
  160. [     16.046]---drivers/mmc/mmc.c 2733 mmc_init
  161. reading uEnv.txt
  162. [mmc]: blkcnt should not be 0
  163. 26 bytes read in 6 ms (3.9 KiB/s)
  164. Loading boot environment ...
  165. [mmc]: Has init
  166. [     16.067]---drivers/mmc/mmc.c 2733 mmc_init
  167. reading boot.scr
  168. 835 bytes read in 4 ms (203.1 KiB/s)
  169. Booting with script ...
  170. ## Executing script at 41000000
  171. [mmc]: Has init
  172. [     16.101]---drivers/mmc/mmc.c 2733 mmc_init
  173. reading bananapi/bpi-m64/linux/pine64-plus.dtb
  174. 69143 bytes read in 14 ms (4.7 MiB/s)
  175. [mmc]: Has init
  176. [     16.161]---drivers/mmc/mmc.c 2733 mmc_init
  177. reading bananapi/bpi-m64/linux/Image
  178. 11111672 bytes read in 543 ms (19.5 MiB/s)
  179. [mmc]: Has init
  180. [     16.716]---drivers/mmc/mmc.c 2733 mmc_init
  181. reading bananapi/bpi-m64/linux/initrd.img
  182. 3526744 bytes read in 178 ms (18.9 MiB/s)
  183. Image lacks image_size field, assuming 16MiB
  184. ## Flattened Device Tree blob at 45000000
  185.    Booting using the fdt blob at 0x45000000
  186.    reserving fdt memory region: addr=41010000 size=10000
  187.    reserving fdt memory region: addr=41020000 size=800
  188.    reserving fdt memory region: addr=40100000 size=4000
  189.    reserving fdt memory region: addr=40104000 size=1000
  190.    reserving fdt memory region: addr=40105000 size=1000
  191.    reserving fdt memory region: addr=45000000 size=11000
  192.    Loading Ramdisk to 76b57000, end 76eb4058 ... OK
  193.    Loading Device Tree to 44feb000, end 44ffefff ... OK
  194.  
  195. Starting kernel ...
  196.  
  197. [mmc]: MMC Device 2 not found
  198. [mmc]: mmc 2 not find, so not exit
  199. Loading, please wait...
  200. starting version 229
  201. Begin: Loading essential drivers ... done.
  202. Begin: Running /scripts/init-premount ... done.
  203. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  204. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  205. done.
  206. Begin: Will now check root file system ... fsck from util-linux 2.27.1
  207. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p2] fsck.ext4 -a -C0 /dev/mmcblk0p2
  208. BPI-ROOT: clean, 41582/105248 files, 345728/420864 blocks
  209. done.
  210. done.
  211. Begin: Running /scripts/local-bottom ... done.
  212. Begin: Running /scripts/init-bottom ... done.
  213.  
  214. Welcome to Raspbian GNU/Linux 8 (jessie)!
  215.  
  216.          Expecting device dev-ttyS0.device...
  217. [  OK  ] Reached target Remote File Systems (Pre).
  218. [  OK  ] Reached target Encrypted Volumes.
  219. [  OK  ] Reached target Swap.
  220.          Expecting device dev-mmcblk0p1.device...
  221. [  OK  ] Created slice Root Slice.
  222. [  OK  ] Created slice User and Session Slice.
  223. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  224. [  OK  ] Listening on Delayed Shutdown Socket.
  225. [  OK  ] Listening on Journal Socket (/dev/log).
  226. [  OK  ] Listening on udev Control Socket.
  227. [  OK  ] Listening on udev Kernel Socket.
  228. [  OK  ] Listening on Journal Socket.
  229. [  OK  ] Created slice System Slice.
  230. [  OK  ] Created slice system-systemd\x2dfsck.slice.
  231. [  OK  ] Created slice system-getty.slice.
  232. [  OK  ] Created slice system-serial\x2dgetty.slice.
  233.          Starting Increase datagram queue length...
  234.          Starting Restore / save the current clock...
  235.          Mounting POSIX Message Queue File System...
  236.          Mounting Huge Pages File System...
  237.          Starting Load Kernel Modules...
  238.          Starting Create list of required static device nodes...rrent kernel...
  239.          Mounting Debug File System...
  240.          Starting udev Coldplug all Devices...
  241. [  OK  ] Reached target Slices.
  242. [  OK  ] Mounted Debug File System.
  243. [  OK  ] Mounted Huge Pages File System.
  244. [  OK  ] Mounted POSIX Message Queue File System.
  245. [  OK  ] Started Increase datagram queue length.
  246. [  OK  ] Started Restore / save the current clock.
  247. [  OK  ] Started Load Kernel Modules.
  248. [  OK  ] Started Create list of required static device nodes ...current kernel.
  249. [  OK  ] Started udev Coldplug all Devices.
  250.          Starting Create Static Device Nodes in /dev...
  251.          Mounting Configuration File System...
  252.          Starting Apply Kernel Variables...
  253.          Mounting FUSE Control File System...
  254. [  OK  ] Listening on Syslog Socket.
  255.          Starting Journal Service...
  256. [  OK  ] Started Journal Service.
  257. [  OK  ] Mounted FUSE Control File System.
  258. [  OK  ] Mounted Configuration File System.
  259. [  OK  ] Started Create Static Device Nodes in /dev.
  260. [  OK  ] Started Apply Kernel Variables.
  261.          Starting udev Kernel Device Manager...
  262. [  OK  ] Started udev Kernel Device Manager.
  263.          Starting Copy rules generated while the root was ro...
  264.          Starting LSB: Set preliminary keymap...
  265. [  OK  ] Started Copy rules generated while the root was ro.
  266. [  OK  ] Created slice system-systemd\x2drfkill.slice.
  267. [  OK  ] Reached target Sound Card.
  268. [  OK  ] Found device /dev/ttyS0.
  269. [  OK  ] Found device /dev/mmcblk0p1.
  270.          Starting File System Check on /dev/mmcblk0p1...
  271. [  OK  ] Started LSB: Set preliminary keymap.
  272. [  OK  ] Reached target Paths.
  273.          Starting Remount Root and Kernel File Systems...
  274. [  OK  ] Started Remount Root and Kernel File Systems.
  275.          Starting Load/Save RF Kill Switch Status of rfkill0...
  276.          Starting Load/Save Random Seed...
  277. [  OK  ] Reached target Local File Systems (Pre).
  278. [  OK  ] Started Load/Save Random Seed.
  279. [  OK  ] Started Load/Save RF Kill Switch Status of rfkill0.
  280. [    4.873700] systemd-fsck[1048]: fsck.fat 3.0.27 (2014-11-12)
  281. [    4.874808] systemd-fsck[1048]: /dev/mmcblk0p1: 211 files, 53232/65467 clusters
  282. [  OK  ] Started File System Check on /dev/mmcblk0p1.
  283.          Mounting /boot...
  284. [  OK  ] Mounted /boot.
  285. [  OK  ] Reached target Local File Systems.
  286.          Starting Create Volatile Files and Directories...
  287.          Starting Tell Plymouth To Write Out Runtime Data...
  288.          Starting LSB: Raise network interfaces....
  289. [  OK  ] Reached target Remote File Systems.
  290.          Starting Trigger Flushing of Journal to Persistent Storage...
  291.          Starting LSB: Prepare console...
  292.          Starting LSB: Switch to ondemand cpu governor (unles... is pressed)...
  293. [  OK  ] Started Create Volatile Files and Directories.
  294. [  OK  ] Started Tell Plymouth To Write Out Runtime Data.
  295. [  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
  296. [  OK  ] Started LSB: Prepare console.
  297.          Starting LSB: Set console font and keymap...
  298.          Starting Update UTMP about System Boot/Shutdown...
  299. [  OK  ] Started LSB: Raise network interfaces..
  300. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  301. [  OK  ] Started LSB: Set console font and keymap.
  302. [  OK  ] Started LSB: Switch to ondemand cpu governor (unless...ey is pressed).
  303. [  OK  ] Reached target System Initialization.
  304. [  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  305. [  OK  ] Listening on D-Bus System Message Bus Socket.
  306. [  OK  ] Reached target Sockets.
  307. [  OK  ] Reached target Timers.
  308.          Starting Restore Sound Card State...
  309. [  OK  ] Reached target Basic System.
  310.          Starting Regular background program processing daemon...
  311. [  OK  ] Started Regular background program processing daemon.
  312.          Starting dhcpcd on all interfaces...
  313.          Starting Login Service...
  314.          Starting LSB: Banana Pi init script...
  315.          Starting LSB: Autogenerate and use a swap file...
  316.          Starting LSB: triggerhappy hotkey daemon...
  317.          Starting Avahi mDNS/DNS-SD Stack...
  318.          Starting D-Bus System Message Bus...
  319. [  OK  ] Started D-Bus System Message Bus.
  320. [  OK  ] Started Avahi mDNS/DNS-SD Stack.
  321.          Starting System Logging Service...
  322.          Starting Permit User Sessions...
  323. [  OK  ] Started Restore Sound Card State.
  324. [  OK  ] Started LSB: Autogenerate and use a swap file.
  325. [  OK  ] Started LSB: triggerhappy hotkey daemon.
  326. [  OK  ] Started LSB: Banana Pi init script.
  327. [  OK  ] Started Permit User Sessions.
  328. [  OK  ] Started System Logging Service.
  329. [  OK  ] Started Login Service.
  330. [  OK  ] Started dhcpcd on all interfaces.
  331. [  OK  ] Reached target Network.
  332.          Starting OpenBSD Secure Shell server...
  333. [  OK  ] Started OpenBSD Secure Shell server.
  334.          Starting /etc/rc.local Compatibility...
  335. [  OK  ] Reached target Network is Online.
  336.          Starting LSB: Start NTP daemon...
  337. [  OK  ] Started LSB: Start NTP daemon.
  338. My IP address is 169.254.127.228
  339. [  OK  ] Started /etc/rc.local Compatibility.
  340.          Starting Wait for Plymouth Boot Screen to Quit...
  341.          Starting Terminate Plymouth Boot Screen...
  342. [  OK  ] Started Wait for Plymouth Boot Screen to Quit.
  343. [  OK  ] Started Terminate Plymouth Boot Screen.
  344.          Starting Getty on tty1...
  345. [  OK  ] Started Getty on tty1.
  346.          Starting Serial Getty on ttyS0...
  347. [  OK  ] Started Serial Getty on ttyS0.
  348. [  OK  ] Reached target Login Prompts.
  349. [  OK  ] Reached target Multi-User System.
  350. [  OK  ] Reached target Graphical Interface.
  351.          Starting Update UTMP about System Runlevel Changes...
  352. [  OK  ] Started Update UTMP about System Runlevel Changes.
  353.  
  354. Raspbian GNU/Linux 8 bpi-iot-ros-ai ttyS0
  355.  
  356. bpi-iot-ros-ai login:
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top