Guest User

Untitled

a guest
Apr 18th, 2016
205
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.14.29 (odroid@odroid64) (gcc version 4.9.3 (Ubuntu/Linaro 4.9.3-13ubuntu2) ) #7 SMP PREEMPT Mon Apr 18 14:01:11 EDT 2016
  5. [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
  6. [ 0.000000] secmon: share mem setup
  7. [ 0.000000] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory
  8. [ 0.000000] __reserved_mem_alloc_size: linux,meson-fb
  9. [ 0.000000] fb: Reserved memory: created fb at 0x000000003e000000, size 32 MiB
  10. [ 0.000000] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory
  11. [ 0.000000] __reserved_mem_alloc_size: linux,di
  12. [ 0.000000] DI reserved memory: created CMA memory pool at 0x000000003c200000, size 30 MiB
  13. [ 0.000000] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem
  14. [ 0.000000] __reserved_mem_alloc_size: linux,ion-dev
  15. [ 0.000000] linux,ion-dev add multi user:ffffffc001bf2360
  16. [ 0.000000] ion_dev mem setup
  17. [ 0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
  18. [ 0.000000] ppmgr share mem setup
  19. [ 0.000000] linux,ion-dev add multi user:ffffffc001bfac20
  20. [ 0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
  21. [ 0.000000] __reserved_mem_alloc_size: linux,codec_mm_cma
  22. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000027800000, size 188 MiB
  23. [ 0.000000] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
  24. [ 0.000000] __reserved_mem_alloc_size: linux,picdec
  25. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037000000, size 48 MiB
  26. [ 0.000000] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool
  27. [ 0.000000] __reserved_mem_alloc_size: linux,codec_mm_reserved
  28. [ 0.000000] codec_mm:vdec: reserved mem setup
  29. [ 0.000000] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
  30. [ 0.000000] cma: Reserved 8 MiB at 36800000
  31. [ 0.000000] On node 0 totalpages: 240896
  32. [ 0.000000] Normal zone: 4392 pages used for memmap
  33. [ 0.000000] Normal zone: 0 pages reserved
  34. [ 0.000000] Normal zone: 240896 pages, LIFO batch:31
  35. [ 0.000000] psci: probing function IDs from device-tree
  36. [ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc03a1ab000 s19456 r8192 d21504 u49152
  37. [ 0.000000] pcpu-alloc: s19456 r8192 d21504 u49152 alloc=12*4096
  38. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  39. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 236504
  40. [ 0.000000] Kernel command line: root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait rw console=ttyS0,115200n8 console=tty0 no_console_suspend hdmimode=1080p60hz m_bpp= vout= fsck.repair=yes net.ifnames=0 consoleblank=0
  41. [ 0.000000] logo: get hdmimode: 1080p60hz
  42. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  43. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  44. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  45. [ 0.000000] Memory: 537776K/963584K available (7571K kernel code, 848K rwdata, 2636K rodata, 875K init, 3151K bss, 425808K reserved)
  46. [ 0.000000] Virtual kernel memory layout:
  47. vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  48. vmemmap : 0xffffff8040010000 - 0xffffff8041180000 ( 17 MB)
  49. modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  50. memory : 0xffffffc000000000 - 0xffffffc03e000000 ( 992 MB)
  51. .init : 0xffffffc001a79000 - 0xffffffc001b53c00 ( 875 kB)
  52. .text : 0xffffffc001080000 - 0xffffffc001a78c34 ( 10212 kB)
  53. .data : 0xffffffc001b54000 - 0xffffffc001c282a0 ( 849 kB)
  54. [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  55. [ 0.000000] Preemptible hierarchical RCU implementation.
  56. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  57. [ 0.000005] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
  58. [ 0.000023] mclk->mux_reg =ffffff8000004990,mclk->reg =ffffff8000008994
  59. [ 0.000068] local timer MESON TIMER-G mclk->mux_reg =ffffff8000004990,mclk->reg =ffffff800000a998
  60. [ 0.000089] local timer MESON TIMER-H mclk->mux_reg =ffffff8000004990,mclk->reg =ffffff800000c99c
  61. [ 0.000110] local timer MESON TIMER-I mclk->mux_reg =ffffff8000004990,mclk->reg =ffffff800000e9a0
  62. [ 0.000121] Switching to timer-based delay loop
  63. [ 0.000362] Console: colour dummy device 80x25
  64. [ 0.000865] console [tty0] enabled
  65. [ 0.002039] allocated 4194304 bytes of page_cgroup
  66. [ 0.002048] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  67. [ 0.002067] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  68. [ 0.002085] pid_max: default: 32768 minimum: 301
  69. [ 0.002169] Security Framework initialized
  70. [ 0.002198] AppArmor: AppArmor initialized
  71. [ 0.002236] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  72. [ 0.002249] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  73. [ 0.004087] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
  74. [ 0.004103] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
  75. [ 0.004117] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
  76. [ 0.004132] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
  77. [ 0.006394] Initializing cgroup subsys debug
  78. [ 0.006407] Initializing cgroup subsys memory
  79. [ 0.006426] Initializing cgroup subsys devices
  80. [ 0.006436] Initializing cgroup subsys freezer
  81. [ 0.006446] Initializing cgroup subsys net_cls
  82. [ 0.006456] Initializing cgroup subsys blkio
  83. [ 0.006465] Initializing cgroup subsys perf_event
  84. [ 0.006479] Initializing cgroup subsys net_prio
  85. [ 0.006489] Initializing cgroup subsys hugetlb
  86. [ 0.006520] ftrace: allocating 27227 entries in 107 pages
  87. [ 0.031023] /cpus/cpu@0: Missing clock-frequency property
  88. [ 0.031052] /cpus/cpu@1: Missing clock-frequency property
  89. [ 0.031064] /cpus/cpu@2: Missing clock-frequency property
  90. [ 0.031076] /cpus/cpu@3: Missing clock-frequency property
  91. [ 0.031090] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  92. [ 0.071871] Meson chip version = RevB (1F:B - 0:0)
  93. [ 0.090816] CPU1: Booted secondary processor
  94. [ 0.110788] CPU2: Booted secondary processor
  95. [ 0.130784] CPU3: Booted secondary processor
  96. [ 0.130839] Brought up 4 CPUs
  97. [ 0.130869] SMP: Total of 4 processors activated.
  98. [ 0.131377] devtmpfs: initialized
  99. [ 0.143546] pinctrl core: initialized pinctrl subsystem
  100. [ 0.143813] regulator-dummy: no parameters
  101. [ 0.144140] NET: Registered protocol family 16
  102. [ 0.144714] register canvas platform driver
  103. [ 0.144725] codec:ignore bus ops for cpu=25
  104. [ 0.144733] codec:ignore bus ops for cpu=29
  105. [ 0.144741] codec:register amports ops for bus[0]
  106. [ 0.144749] codec:register amports ops for bus[4]
  107. [ 0.144757] codec:register amports ops for bus[3]
  108. [ 0.144764] codec:register amports ops for bus[2]
  109. [ 0.144772] codec:register amports ops for bus[1]
  110. [ 0.144779] codec:register amports ops for bus[13]
  111. [ 0.144787] codec:register amports ops for bus[2]
  112. [ 0.144795] codec:register amports ops for bus[14]
  113. [ 0.144817] register rdma platform driver
  114. [ 0.145086] vdso: 2 pages (1 code, 1 data) at base ffffffc001b5a000
  115. [ 0.145119] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  116. [ 0.145643] DMA: preallocated 256 KiB pool for atomic allocations
  117. [ 0.146846] software IO TLB [mem 0x34400000-0x34800000] (4MB) mapped at [ffffffc034400000-ffffffc0347fffff]
  118. [ 0.146860] Serial: AMBA PL011 UART driver
  119. [ 0.146934] hdmitx: system: amhdmitx_init
  120. [ 0.146942] hdmitx: system: Ver: 2014May6
  121. [ 0.146979] tv_vout: tv_init_module
  122. [ 0.146991] tv_vout: major number 254 for disp
  123. [ 0.146999] vout_notify: vout_register_server
  124. [ 0.147006] tv_vout: register tv module server ok
  125. [ 0.147032] codec_mm:codec_mm_module_init
  126. [ 0.147149] gxbb clk HIU base is 0xffffff8000058000
  127. [ 0.147158] gxbb clk ao base is 0xffffff800005a000
  128. [ 0.147200] register mpll_clk_out0 success done
  129. [ 0.147211] register mpll_clk_out1 success done
  130. [ 0.147221] register mpll_clk_out2 success done
  131. [ 0.147394] register sys pll success done
  132. [ 0.147436] clkrate [ xtal ] : 24000000Hz
  133. [ 0.147445] clkrate [ 32Khz ] : 32000Hz
  134. [ 0.147454] clkrate [ clk81 ] : 166666666Hz
  135. [ 0.147462] clkrate [ fixed_pll ] : 2000000000Hz
  136. [ 0.147470] clkrate [ fclk_div2 ] : 1000000000Hz
  137. [ 0.147479] clkrate [ fclk_div3 ] : 666666000Hz
  138. [ 0.147487] clkrate [ fclk_div4 ] : 500000000Hz
  139. [ 0.147495] clkrate [ fclk_div5 ] : 400000000Hz
  140. [ 0.147502] clkrate [ fclk_div7 ] : 285714000Hz
  141. [ 0.147530] gxbb clock initialization complete
  142. [ 0.147629] msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
  143. [ 0.148552] amlogic iomap probe done
  144. [ 0.148694] Init pinux probe!
  145. [ 0.149425] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
  146. [ 0.149594] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
  147. [ 0.149615] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
  148. [ 0.149676] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
  149. [ 0.149696] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
  150. [ 0.150381] codec:codec map io source 0x00000000c1100000,size=1048576 to 0xffffff8000680000
  151. [ 0.150401] codec:codec map io source 0x00000000c8820000,size=65536 to 0xffffff80000a0000
  152. [ 0.150420] codec:codec map io source 0x00000000c883c000,size=8192 to 0xffffff8000094000
  153. [ 0.150449] codec:codec map io source 0x00000000c8100000,size=1048576 to 0xffffff8000800000
  154. [ 0.150469] codec:codec map io source 0x00000000d0100000,size=262144 to 0xffffff8000980000
  155. [ 0.150486] codec:codec map io source 0x00000000c8838000,size=1024 to 0xffffff800007e000
  156. [ 0.150548] codec_mm has 2 memory regions
  157. [ 0.150563] codec_mm codec_mm.16: assigned reserved memory node linux,codec_mm_cma ok
  158. [ 0.150578] codec_mm:codec_mm_reserved_init 0000000023700000->0000000027800000
  159. [ 0.150590] codec_mm codec_mm.16: assigned reserved memory node linux,codec_mm_reserved ok
  160. [ 0.150602] codec_mm:codec_mm_probe mem init done
  161. [ 0.150613] codec_mm:add reserve memory 0000000023700000(aligned 0000000023700000) size=4100000(aligned 4100000)
  162. [ 0.150638] codec_mm has 2 memory regions
  163. [ 0.150649] codec_mm codec_mm.16: assigned reserved memory node linux,codec_mm_cma ok
  164. [ 0.150663] codec_mm:codec_mm_reserved_init 0000000023700000->0000000027800000
  165. [ 0.150675] codec_mm codec_mm.16: assigned reserved memory node linux,codec_mm_reserved ok
  166. [ 0.150686] codec_mm:codec_mm reserved memory probed done
  167. [ 0.150694] codec_mm:codec_mm_probe ok
  168. [ 0.151267] VPU driver version: v01
  169. [ 0.151276] vpu driver detect cpu type: gxbaby
  170. [ 0.151292] load vpu_clk in dts: 666667000Hz(7)
  171. [ 0.151315] vpu_probe OK
  172. [ 0.151849] hdmitx: system: amhdmitx_probe
  173. [ 0.152074] hdmitx hpd irq = 89
  174. [ 0.152262] hdmitx20: Mapped PHY: 0xc0800000
  175. [ 0.152272] hdmitx20: Mapped PHY: 0xc1104400
  176. [ 0.152294] hdmitx20: Mapped PHY: 0xc8100000
  177. [ 0.152303] hdmitx20: Mapped PHY: 0xc8834000
  178. [ 0.152312] hdmitx20: Mapped PHY: 0xc883a000
  179. [ 0.152320] hdmitx20: Mapped PHY: 0xc883c000
  180. [ 0.152333] hdmitx20: Mapped PHY: 0xd0100000
  181. [ 0.152343] hdmitx20: Mapped PHY: 0xda83a000
  182. [ 0.152356] hdmitx: alread display in uboot 0x10
  183. [ 0.152383] avmute set to 1
  184. [ 0.152706] canvas_probe reg=00000000c8838000,size=400
  185. [ 0.152723] canvas maped reg_base =ffffff80000b2000
  186. [ 0.155990] rdma_probe
  187. [ 0.159360] hdmitx: system: irq 2
  188. [ 0.186182] bio: create slab <bio-0> at 0
  189. [ 0.186653] SCSI subsystem initialized
  190. [ 0.186799] usbcore: registered new interface driver usbfs
  191. [ 0.186841] usbcore: registered new interface driver hub
  192. [ 0.186895] usbcore: registered new device driver usb
  193. [ 0.186955] media: Linux media interface: v0.10
  194. [ 0.186984] Linux video capture interface: v2.00
  195. [ 0.187033] pps_core: LinuxPPS API ver. 1 registered
  196. [ 0.187043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  197. [ 0.187066] PTP clock support registered
  198. [ 0.187209] logo: logo_init
  199. [ 0.187253] Advanced Linux Sound Architecture Driver Initialized.
  200. [ 0.187548] Bluetooth: Core ver 2.18
  201. [ 0.187573] NET: Registered protocol family 31
  202. [ 0.187582] Bluetooth: HCI device and connection manager initialized
  203. [ 0.187596] Bluetooth: HCI socket layer initialized
  204. [ 0.187608] Bluetooth: L2CAP socket layer initialized
  205. [ 0.187630] Bluetooth: SCO socket layer initialized
  206. [ 0.187643] NetLabel: Initializing
  207. [ 0.187650] NetLabel: domain hash size = 128
  208. [ 0.187657] NetLabel: protocols = UNLABELED CIPSOv4
  209. [ 0.187696] NetLabel: unlabeled traffic allowed by default
  210. [ 0.188128] Switched to clocksource Timer-E
  211. [ 0.208715] AppArmor: AppArmor Filesystem Enabled
  212. [ 0.212786] NET: Registered protocol family 2
  213. [ 0.213270] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  214. [ 0.213337] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  215. [ 0.213449] TCP: Hash tables configured (established 8192 bind 8192)
  216. [ 0.213517] TCP: reno registered
  217. [ 0.213529] UDP hash table entries: 512 (order: 2, 16384 bytes)
  218. [ 0.213554] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  219. [ 0.213697] NET: Registered protocol family 1
  220. [ 0.213827] [wifi_dev_probe] wifi_dev_probe
  221. [ 0.213838] [wifi_dev_probe] wifi_dt : interrupt_pin=
  222. [ 0.213871] [wifi_dev_probe] wifi_dt : irq_num=null
  223. [ 0.213880] [wifi_dev_probe] wifi_dt : irq_trigger_type=GPIO_IRQ_LOW
  224. [ 0.213891] [wifi_dev_probe] wifi_dt : power_on_pin=
  225. [ 0.213903] [wifi_dev_probe] set pwm as 32k output
  226. [ 0.213949] [wifi_dev_probe] dhd_static_buf setup
  227. [ 0.213964] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ffffffc034a0d600, size=3760
  228. [ 0.213979] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ffffffc034a0d700, size=3760
  229. [ 0.213992] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ffffffc034a0d800, size=3760
  230. [ 0.214006] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ffffffc034a0d900, size=3760
  231. [ 0.214019] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ffffffc034a0da00, size=3760
  232. [ 0.214033] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ffffffc034a0db00, size=3760
  233. [ 0.214047] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ffffffc034a0dc00, size=3760
  234. [ 0.214060] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ffffffc034a0dd00, size=3760
  235. [ 0.214074] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ffffffc034a0de00, size=7856
  236. [ 0.214088] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ffffffc034a0df00, size=7856
  237. [ 0.214108] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ffffffc034a0f000, size=7856
  238. [ 0.214122] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ffffffc034a0f100, size=7856
  239. [ 0.214136] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ffffffc034a0f200, size=7856
  240. [ 0.214149] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ffffffc034a0f300, size=7856
  241. [ 0.214162] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ffffffc034a0f400, size=7856
  242. [ 0.214175] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ffffffc034a0f500, size=7856
  243. [ 0.214190] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ffffffc034a0f600, size=16048
  244. [ 0.214203] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ffffffc034a0d600, size=20504
  245. [ 0.214218] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ffffffc034a0d700, size=20504
  246. [ 0.214232] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ffffffc034a0d800, size=81944
  247. [ 0.214248] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ffffffc034a0d900, size=163864
  248. [ 0.214261] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ffffffc034a0da00, size=20504
  249. [ 0.214275] 4 bcmdhd_init_wlan_mem: wlan_mem_array[5]=ffffffc034a0db00, size=81944
  250. [ 0.214290] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ffffffc034b80000, size=65536
  251. [ 0.214303] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=ffffffc034b90000, size=65536
  252. [ 0.214314] bcmdhd_init_wlan_mem: WIFI MEM Allocated
  253. [ 0.214322] [wifi_dev_probe] interrupt_pin=235
  254. [ 0.214330] [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  255. [ 0.214339] [wifi_dev_probe] power_on_pin=234
  256. [ 0.214347] [wifi_dev_probe] clock_32k_pin=0
  257. [ 0.214562] Unpacking initramfs...
  258. [ 0.482725] Freeing initrd memory: 8356K (ffffffc033698000 - ffffffc033ec1000)
  259. [ 0.483255] kvm [1]: Using HYP init bounce page @23054000
  260. [ 0.483366] kvm [1]: Cannot obtain GICH resource
  261. [ 0.483398] kvm [1]: error initializing Hyp mode: -22
  262. [ 0.483793] futex hash table entries: 1024 (order: 5, 131072 bytes)
  263. [ 0.483875] audit: initializing netlink subsys (disabled)
  264. [ 0.483923] audit: type=2000 audit(0.460:1): initialized
  265. [ 0.484343] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  266. [ 0.487499] VFS: Disk quotas dquot_6.5.2
  267. [ 0.487634] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  268. [ 0.488273] hdmitx: plugin
  269. [ 0.488290] hdmitx: video: get current mode: null
  270. [ 0.488299] hdmtix: set audio
  271. [ 0.488312] hdmitx tx_aud_src = 0
  272. [ 0.488327] hdmitx: system: irq 80000001
  273. [ 0.488355] hdmitx aud_n_para = 24576
  274. [ 0.488377] hdmitx set channel status
  275. [ 0.488438] Start = 0x10000100 End = 0x100001ff
  276. [ 0.488450] [0x10000103]: 0x00000008
  277. [ 0.488458] [0x10000104]: 0x00000001
  278. [ 0.488564] [0x10000170]: 0x00000010
  279. [ 0.488585] [0x10000180]: 0x000000ff
  280. [ 0.488593] [0x10000181]: 0x000000ff
  281. [ 0.488601] [0x10000182]: 0x00000003
  282. [ 0.488609] [0x10000183]: 0x00000007
  283. [ 0.488617] [0x10000184]: 0x0000003f
  284. [ 0.488625] [0x10000185]: 0x00000002
  285. [ 0.488633] [0x10000187]: 0x000000ff
  286. [ 0.488641] [0x10000188]: 0x00000003
  287. [ 0.489418] msgmni has been set to 1554
  288. [ 0.490211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  289. [ 0.490284] io scheduler noop registered (default)
  290. [ 0.490293] io scheduler deadline registered
  291. [ 0.490385] io scheduler cfq registered
  292. [ 0.511621] meson-rng c8834000.rng: hwrng registered
  293. [ 0.511758] mali-utgard d00c0000.mali: max pp is 3
  294. [ 0.511770] mali-utgard d00c0000.mali: set min pp to default 1
  295. [ 0.511781] mali-utgard d00c0000.mali: min pp is 1
  296. [ 0.511790] mali-utgard d00c0000.mali: set min clk default to 0
  297. [ 0.511801] mali-utgard d00c0000.mali: min clk is 0
  298. [ 0.511816] mali-utgard d00c0000.mali: hiu io source 0xffffff80000e0000
  299. [ 0.511832] mali-utgard d00c0000.mali: hiu io source 0xffffff80000e2000
  300. [ 0.511843] mali-utgard d00c0000.mali: num of pp used most of time 3
  301. [ 0.511855] mali-utgard d00c0000.mali: clock dvfs table size is 6
  302. [ 0.511866] mali-utgard d00c0000.mali: max clk set 4
  303. [ 0.511875] mali-utgard d00c0000.mali: max clk is 4
  304. [ 0.511885] mali-utgard d00c0000.mali: turbo clk set to 5
  305. [ 0.511895] mali-utgard d00c0000.mali: turbo clk is 5
  306. [ 0.511905] mali-utgard d00c0000.mali: default clk set to 2
  307. [ 0.511915] mali-utgard d00c0000.mali: default clk is 2
  308. [ 0.511973] mali-utgard d00c0000.mali: ====================0====================
  309. clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 120>, clk_sample=125
  310. [ 0.511999] mali-utgard d00c0000.mali: ====================1====================
  311. clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
  312. [ 0.512025] mali-utgard d00c0000.mali: ====================2====================
  313. clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
  314. [ 0.512051] mali-utgard d00c0000.mali: ====================3====================
  315. clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
  316. [ 0.512076] mali-utgard d00c0000.mali: ====================4====================
  317. clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
  318. [ 0.512102] mali-utgard d00c0000.mali: ====================5====================
  319. clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=792
  320. [ 0.513577] gpu cooling register okay with err=0
  321. [ 0.513618] gpu core cooling register okay with err=0
  322. [ 0.513773] Mali: Mali device driver loaded
  323. [ 0.515780] loop: module loaded
  324. [ 0.516083] mtdoops: mtd device (mtddev=name/number) must be supplied
  325. [ 0.524406] libphy: stmmac: probed
  326. [ 0.524428] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  327. [ 0.524439] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
  328. [ 0.524753] usbcore: registered new interface driver cdc_ether
  329. [ 0.524807] usbcore: registered new interface driver cdc_ncm
  330. [ 0.524911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  331. [ 0.524922] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  332. [ 0.525007] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  333. [ 0.525066] usbcore: registered new interface driver cdc_acm
  334. [ 0.525075] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  335. [ 0.525116] usbcore: registered new interface driver usb-storage
  336. [ 0.525201] usbcore: registered new interface driver usbserial
  337. [ 0.525419] mousedev: PS/2 mouse device common for all mice
  338. [ 0.525644] i2c /dev entries driver
  339. [ 0.525716] IR NEC protocol handler initialized
  340. [ 0.525724] IR RC5(x) protocol handler initialized
  341. [ 0.525732] IR RC6 protocol handler initialized
  342. [ 0.525740] IR JVC protocol handler initialized
  343. [ 0.525748] IR Sony protocol handler initialized
  344. [ 0.525756] IR RC5 (streamzap) protocol handler initialized
  345. [ 0.525764] IR SANYO protocol handler initialized
  346. [ 0.525772] IR MCE Keyboard/mouse protocol handler initialized
  347. [ 0.526129] ledtrig-cpu: registered to indicate activity on CPUs
  348. [ 0.526285] usbcore: registered new interface driver usbhid
  349. [ 0.526295] usbhid: USB HID core driver
  350. [ 0.526490] ashmem: initialized
  351. [ 0.526595] logger: created 256K log 'log_main'
  352. [ 0.526692] logger: created 256K log 'log_events'
  353. [ 0.526780] logger: created 256K log 'log_radio'
  354. [ 0.526871] logger: created 256K log 'log_system'
  355. [ 0.527112] ==uart0 reg addr = ffffff800021e4c0
  356. [ 0.527141] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  357. [ 0.527161] ttyS0 use xtal 24000000 change 0 to 115200
  358. [ 2.493429] console [ttyS0] enabled
  359. [ 2.497074] ==uart1 reg addr = ffffff80002724c0
  360. [ 2.501380] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  361. [ 2.510701] enter cpufreq
  362. [ 2.513186] probe cpufreq okay
  363. [ 2.518590] dwc_otg c9100000.dwc2_b: dwc_otg_driver_probe(ffffffc0348df200)
  364. [ 2.518613] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
  365. [ 2.524741] dwc_otg c9100000.dwc2_b: base=0xffffff8001680000
  366. [ 2.524746] dwc_otg c9100000.dwc2_b: dwc_otg_device=0xffffffc021cd1c00
  367. [ 2.527405] dwc_otg: Core Release: 3.10a
  368. [ 2.528651] dwc_otg: Setting default values for core params
  369. [ 2.534143] dwc_otg: curmode: 1, host_only: 1
  370. [ 2.538465] dwc_otg c9100000.dwc2_b: DMA config: BURST_DEFAULT
  371. [ 2.540644] dwc_otg: Using Buffer DMA mode
  372. [ 2.542502] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  373. [ 2.547590] dwc_otg: Working on port type = HOST
  374. [ 2.552393] dwc_otg dwc2_b: DWC OTG Controller
  375. [ 2.556572] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
  376. [ 2.563311] dwc_otg dwc2_b: irq 63, io mem 0x00000000
  377. [ 2.568298] dwc_otg: -------hcd->flags.d32 = 0
  378. [ 2.572706] dwc_otg: Init: Port Power? op_state=1
  379. [ 2.577345] dwc_otg: Init1: Power Port (0)
  380. [ 2.581841] hub 1-0:1.0: USB hub found
  381. [ 2.585124] hub 1-0:1.0: 1 port detected
  382. [ 2.589134] dwc_otg c9000000.dwc2_a: dwc_otg_driver_probe(ffffffc0348df400)
  383. [ 2.589174] dwc_otg: usb0: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000000, ctrl: 0
  384. [ 2.597450] dwc_otg c9000000.dwc2_a: base=0xffffff8001700000
  385. [ 2.597456] dwc_otg c9000000.dwc2_a: dwc_otg_device=0xffffffc0338c4c00
  386. [ 2.610025] dwc_otg: Core Release: 3.10a
  387. [ 2.610047] dwc_otg: Setting default values for core params
  388. [ 2.613843] dwc_otg: curmode: 1, host_only: 1
  389. [ 2.618172] dwc_otg c9000000.dwc2_a: DMA config: BURST_DEFAULT
  390. [ 2.620346] dwc_otg: Using Buffer DMA mode
  391. [ 2.622205] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  392. [ 2.627293] dwc_otg: Working on port type = HOST
  393. [ 2.631959] dwc_otg dwc2_a: DWC OTG Controller
  394. [ 2.636272] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
  395. [ 2.643010] dwc_otg dwc2_a: irq 62, io mem 0x00000000
  396. [ 2.647993] dwc_otg: -------hcd->flags.d32 = 0
  397. [ 2.652792] hub 2-0:1.0: USB hub found
  398. [ 2.656117] hub 2-0:1.0: 1 port detected
  399. [ 2.660441] aml_vrtc rtc.27: rtc core: registered aml_vrtc as rtc0
  400. [ 2.666205] secmon has 1 memory regions
  401. [ 2.669928] secmon: share in base: 0xffffff80004e6000, share out base: 0xffffff80004e8000
  402. [ 2.678010] secmon secmon.3: assigned reserved memory node linux,secmon ok
  403. [ 2.684830] secmon: probe done
  404. [ 2.687941] storage: storage in base: 0xffffff8001780000
  405. [ 2.693161] storage: storage out base: 0xffffff8001800000
  406. [ 2.698457] storage: storage block base: 0xffffff8001880000
  407. [ 2.703968] storage: probe done!
  408. [ 2.707211] Error: Driver 'ICPlus IP175C' is already registered, aborting...
  409. [ 2.714155] libphy: ICPlus IP175C: Error -16 in registering driver
  410. [ 2.720760] aml_sd_emmc_probe: line 2954
  411. [ 2.724152] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  412. [ 2.733571] aml_sd_emmc_reg_init 677
  413. [ 2.737004] pdata->caps 7
  414. [ 2.739514] pdata->caps2 0
  415. [ 2.742179] get property: port, value:0x00000001
  416. [ 2.748482] get property: ocr_avail, value:0x00200080
  417. [ 2.754771] get property: f_min, value:0x00061a80
  418. [ 2.761116] get property: f_max, value:0x05f5e100
  419. [ 2.767364] get property: max_req_size, value:0x00020000
  420. [ 2.773667] get property: irq_in, value:0x00000003
  421. [ 2.779964] get property: irq_out, value:0x00000005
  422. [ 2.786258] get property: gpio_cd, str:
  423. [ 2.791558] dwc_otg: Indeed it is in host mode hprt0 = 00021501
  424. [ 2.798144] get property: pinname, str:sd
  425. [ 2.802814] get property: jtag_pin, str:
  426. [ 2.808073] get property: card_type, value:0x00000005
  427. [ 2.814380] get property: gpio_dat3, str:
  428. [ 2.819668] [aml_is_card_insert] card IN
  429. 
  430. [ 2.875839] normal card in
  431. [ 2.938212] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  432. [ 2.938260] aml_sd_emmc_probe: line 2954
  433. [ 2.949370] [aml_is_card_insert] card IN
  434. 
  435. [ 2.958213] [aml_is_card_insert] card IN
  436. 
  437. [ 2.959375] aml_sd_emmc_reg_init 677
  438. [ 2.962809] pdata->caps c0000d47
  439. [ 2.965904] pdata->caps2 60
  440. [ 2.968770] usb 1-1: new full-speed USB device number 2 using dwc_otg
  441. [ 2.975137] get property: ocr_avail, value:0x00200080
  442. [ 2.981443] get property: f_min, value:0x000493e0
  443. [ 2.982289] dwc_otg: Indeed it is in host mode hprt0 = 00021501
  444. [ 2.993663] get property: f_max, value:0x0bebc200
  445. [ 2.999826] get property: max_req_size, value:0x00020000
  446. [ 3.006176] get property: pinname, str:emmc
  447. [ 3.011751] get property: card_type, value:0x00000001
  448. [ 3.018003] get property: gpio_dat3, str:
  449. [ 3.022850] sd: new high speed SDHC card at address aaaa
  450. [ 3.023192] sd: clock 50000000, 4-bit-bus-width
  451.  
  452. [ 3.023194] mmcblk1: sd:aaaa SL16G 14.8 GiB
  453. [ 3.024352] mmcblk1: p1 p2
  454. [ 3.041580] get property: hw_reset, str:
  455. [ 3.098152] aml_emmc_hw_reset 1356
  456. [ 3.098157] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  457. [ 3.098182] aml_sd_emmc_probe: line 2954
  458. [ 3.105547] aml_sd_emmc_reg_init 677
  459. [ 3.109029] pdata->caps 78107
  460. [ 3.111880] pdata->caps2 0
  461. [ 3.114606] get property: ocr_avail, value:0x00200080
  462. [ 3.120858] get property: f_min, value:0x00061a80
  463. [ 3.127146] get property: f_max, value:0x0bebc200
  464. [ 3.133449] get property: max_req_size, value:0x00020000
  465. [ 3.139748] get property: pinname, str:sdio
  466. [ 3.145345] get property: card_type, value:0x00000003
  467. [ 3.162387] emmc: BKOPS_EN bit is not set
  468. [ 3.166071] emmc: try set sd/emmc to DDR mode
  469. [ 3.166147] emmc: new DDR MMC card at address 0001
  470. [ 3.169832] emmc: clock 50000000, 8-bit-bus-width
  471.  
  472. [ 3.174828] mmcblk0: emmc:0001 NCard 7.21 GiB
  473. [ 3.179365] mmcblk0boot0: emmc:0001 NCard partition 1 4.00 MiB
  474. [ 3.185213] mmcblk0boot1: emmc:0001 NCard partition 2 4.00 MiB
  475. [ 3.191088] mmcblk0rpmb: emmc:0001 NCard partition 3 128 KiB
  476. [ 3.197522] mmcblk0: unknown partition table
  477. [ 3.202272] mmcblk0boot1: unknown partition table
  478. [ 3.206788] mmcblk0boot0: unknown partition table
  479. [ 3.208161] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  480. [ 3.208381] ion_dev has 1 memory regions
  481. [ 3.231450] fb: osd_init_module
  482. [ 3.231542] fb: viu vsync irq: 35
  483. [ 3.232246] meson-fb has 1 memory regions
  484. [ 3.236597] meson-fb meson-fb.13: assigned reserved memory node linux,meson-fb ok
  485. [ 3.243648] tv_vout: tv_set_current_vmode[672]fps_target_mode=12
  486. [ 3.249587] tv_vout: mode is 12,sync_duration_den=1,sync_duration_num=60
  487. [ 3.256224] switch_vpu_mem_pd: vencp ON
  488. [ 3.260022] tv_vout: TV mode 1080p60hz selected.
  489. [ 3.264589] tv_vout: new mode =1080p60hz set ok
  490. [ 3.269084] vout_serve: vinfo mode is: 1080p60hz
  491. [ 3.273644] switch_vpu_mem_pd: viu_osd1 ON
  492. [ 3.277696] switch_vpu_mem_pd: viu_osd2 ON
  493. [ 3.281757] switch_vpu_mem_pd: viu_osd_scale ON
  494. [ 3.286396] osd_rdma: osd_rdma_init: rmda_table p=0x36847000,op=0x36847000 , v=0xffffff800064c000
  495. [ 3.295050] fb: osd_probe vinfo:ffffffc001bf3640
  496. [ 3.299611] fb: Frame buffer memory assigned at
  497. [ 3.303917] fb: phy: 0x3e000000, vir:0xffffff8003c00000, size=24576K
  498. [ 3.310738] fb: osd_set_res_bootargs : mode 60
  499. [ 3.315128] fb: osd_set_res_bootargs, no available resolution info.
  500. [ 3.321172] fb: fb def : 1920 1080 1920 3240 32
  501. [ 3.325823] fb: init fbdev bpp is:32
  502. [ 3.329366] fb: ---------------clear fb0 memory
  503. [ 3.340454] fb: osd[0] canvas.idx =0x40
  504. [ 3.340455] fb: osd[0] canvas.addr=0x3e000000
  505. [ 3.340457] fb: osd[0] canvas.width=7680
  506. [ 3.340458] fb: osd[0] canvas.height=3240
  507. [ 3.373826] Console: switching to colour frame buffer device 240x67
  508. [ 3.420335] fb: Frame buffer memory assigned at
  509. [ 3.420420] fb: phy: 0x3f800000, vir:0xffffff8005480000, size=8192K
  510. [ 3.436940] fb: osd probe OK
  511. [ 3.437099] vout_serve: vout_init_module
  512. [ 3.438186] vout_serve: meson_vout_probe
  513. [ 3.442010] vout_serve: create vout attribute OK
  514. [ 3.446612] ge2d: ge2d_init_module
  515. [ 3.449949] ge2d: ge2d_dev major:245
  516. [ 3.453603] ge2d: ge2d clock is 400 MHZ
  517. [ 3.457261] ge2d: ge2d: pdev=ffffffc0348da200, irq=182, rstc=0xffffffc03399ce00, clk=ffffffc03480a500
  518. [ 3.466437] ge2d: mapped phy: 0xd0160000
  519. [ 3.470298] ge2d: ge2d start monitor
  520. [ 3.473971] codec:Amlogic A/V streaming port init
  521. [ 3.478510] ge2d: ge2d workqueue monitor start
  522. [ 3.479108] codec:get gate demux control ok ffffffc03392d700
  523. [ 3.479112] codec:get gate parser_top control ok ffffffc03392d800
  524. [ 3.479116] codec:get gate vpu_intr control ok ffffffc03392d900
  525. [ 3.479122] codec:get gate vdec control ok ffffffc03392da00
  526. [ 3.479287] codec:[tsync_pcr_init]init success.
  527. [ 3.479320] codec:regist mpeg12 codec profile
  528. [ 3.479359] codec:regist mpeg4 codec profile
  529. [ 3.479360] codec:amvdec_vc1 module init
  530. [ 3.479391] codec:regist vc1 codec profile
  531. [ 3.479393] codec:amvdec_h264 module init
  532. [ 3.479442] codec:regist h264 codec profile
  533. [ 3.479444] codec:amvdec_h264mvc module init
  534. [ 3.479474] codec:regist hmvc codec profile
  535. [ 3.479476] codec:amvdec_h264_4k2k module init
  536. [ 3.479506] codec:regist h264_4k2k codec profile
  537. [ 3.479508] codec:amvdec_h265 module init
  538. [ 3.479539] codec:regist hevc codec profile
  539. [ 3.479569] codec:regist mjpeg codec profile
  540. [ 3.479570] codec:amvdec_real module init
  541. [ 3.479601] codec:regist real codec profile
  542. [ 3.479602] codec:amvdec_avs module init
  543. [ 3.479633] codec:regist avs codec profile
  544. [ 3.479677] amvenc_avc_probe -- reserved memory config fail.
  545. [ 3.479680] amvenc_avc - cma memory pool size: 32 MB
  546. [ 3.479696] encode_wq_init.
  547. [ 3.479701] encode start monitor.
  548. [ 3.479854] jpegenc module init
  549. [ 3.479949] codec:picdec_driver_probe called.
  550. [ 3.479951] picdec has 1 memory regions
  551. [ 3.479983] picdec picdec.21: assigned reserved memory node linux,picdec ok
  552. [ 3.479984] codec:picdec_driver_probe done.
  553. [ 3.479986] codec:reserved memory config fail , use CMA .
  554. [ 3.483281] codec:cma memory is 37000000 , size is 3000000
  555. [ 3.483605] codec:0 addr is 37000000################
  556. [ 3.483615] codec:1 addr is 372fd000################
  557. [ 3.483766] switch_vpu_mem_pd: vpu_arb ON
  558. [ 3.483999] codec:create_ge2d_work_queue video task ok
  559. [ 3.484178] encode workqueue monitor start.
  560. [ 3.484281] codec:register clk_set_setting cpu[31]
  561. [ 3.484575] di_module_init ok.
  562. [ 3.484579] di_module_init: major 241
  563. [ 3.484744] di_probe
  564. [ 3.484836] deinterlace has 1 memory regions
  565. [ 3.484869] di reveser memory 0x3c200000, size 30MB.
  566. [ 3.484878] deinterlace deinterlace.23: assigned reserved memory node linux,di ok
  567. [ 3.485045] rdma_register, rdma_table_addr ffffff800064e000 rdma_table_addr_phy 3684e000 reg_buf ffffffc0339cc000
  568. [ 3.485047] rdma_register success, handle 1 table_size 8192
  569. [ 3.485049] di_probe allocate rdma channel 1.
  570. [ 3.485052] DI hw version 2.
  571. [ 3.485062] 0x000000c3:Y=c3,U=0,V=0
  572. [ 3.485064] 0x000000c4:Y=c4,U=0,V=0
  573. [ 3.485065] 0x000000c5:Y=c5,U=0,V=0
  574. [ 3.485067] 0x000000c6:Y=c6,U=0,V=0
  575. [ 3.485069] 0x000000c7:Y=c7,U=0,V=0
  576. [ 3.485070] 0x000000c8:Y=c8,U=0,V=0
  577. [ 3.485072] 0x000000c9:Y=c9,U=0,V=0
  578. [ 3.485074] 0x000000ca:Y=ca,U=0,V=0
  579. [ 3.485076] 0x000000cb:Y=cb,U=0,V=0
  580. [ 3.485077] 0x000000cc:Y=cc,U=0,V=0
  581. [ 3.485080] 0x000000cd:Y=cd,U=0,V=0
  582. [ 3.485082] 0x000000ce:Y=ce,U=0,V=0
  583. [ 3.485083] 0x000000cf:Y=cf,U=0,V=0
  584. [ 3.485224] di_probe here.
  585. [ 3.485239] switch_vpu_mem_pd: di_pre OFF
  586. [ 3.485432] efusekeynum: 4
  587. [ 3.485440] efusekeyname: mac offset: 0 size: 6
  588. [ 3.485444] efusekeyname: mac_bt offset: 6 size: 6
  589. [ 3.485449] efusekeyname: mac_wifi offset: 12 size: 6
  590. [ 3.485454] efusekeyname: usid offset: 18 size: 16
  591. [ 3.485544] efuse efuse.8: probe OK!
  592. [ 3.485672] key unify config unifykey-num is 11
  593. [ 3.485710] key unify fact unifykey-num is 11
  594. [ 3.485714] aml_unifykeys_probe:1087=============unifykey_devno:ef00000
  595. [ 3.485791] 6unifykey: device unifykeys created ok
  596. [ 3.485818] 6aml_unifykeys_init done!
  597. [ 3.485820] ppmgr module init func called
  598. [ 3.485857] ppmgr_driver_probe called
  599. [ 3.485859] ppmgr has 1 memory regions
  600. [ 3.485870] init ppmgr memsource 3a200000->3c1fffff
  601. [ 3.485993] ppmgr_probe done
  602. [ 3.486077] [wifi_power_probe] Error: can not read string
  603. [ 3.486087] [wifi_power_probe] wifi_dev_probe : there is no DTS file!
  604. [ 3.486368] ionvideo-000: V4L2 device registered as video13
  605. [ 3.486375] [dsp]register dsp to char divece(257)
  606. [ 3.486637] amaudio: driver amaudio succuess!
  607. [ 3.486843] amaudio2: device amaudio2 created
  608. [ 3.486847] amlvideo_init called
  609. [ 3.486848] amlvideo_create_instance called
  610. [ 3.486850] v4l2_dev.name=:amlvideo-000
  611. [ 3.486910] amlvideo-000: V4L2 device registered as video10
  612. [ 3.486912]
  613.  
  614. VECM init
  615.  
  616. [ 3.487140] poc_cfg_reg = ffffff8000652d54
  617.  
  618. [ 3.487144] amlnf_get_resource : d0074800 200
  619.  
  620. [ 3.487165] boot_device_flag : 1
  621. [ 3.487169] Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  622. [ 3.487175] amlnf_phy_init : amlnf init flag 0
  623. [ 3.487300] pinmux-gxbb c1109880.pinmux: pin BOOT_0 already requested by d0074000.emmc; cannot claim for d0074800.nand
  624. [ 3.487304] pinmux-gxbb c1109880.pinmux: pin-34 (d0074800.nand) status -22
  625. [ 3.487308] pinmux-gxbb c1109880.pinmux: could not request pin 34 (BOOT_0) from group all_nand_pins on device c1109880.pinmux
  626. [ 3.487312] aml_nand d0074800.nand: Error applying setting, reverse things back
  627. [ 3.487315] amlnf_phy_init:82 d0074800.nand can't get pinctrl
  628. [ 3.487320] ######STS IRQ mode for nand driver
  629. [ 3.487336] clk_reg 81000245
  630. [ 3.487355] reset failed
  631. [ 3.487356] get_chip_type and ret:fffffffe
  632. [ 3.487358] get_chip_type and ret:fffffffe
  633. [ 3.487360] chip detect failed and ret:fffffffe
  634. [ 3.487361] nandphy_init failed and ret=0xfffffff1
  635. [ 3.487475] saradc c1108680.saradc: initialized by BL30
  636. [ 3.487478] saradc c1108680.saradc: calibration start:
  637. [ 3.487525] saradc c1108680.saradc: nominal=0, value=0
  638. [ 3.487570] saradc c1108680.saradc: nominal=256, value=246
  639. [ 3.487615] saradc c1108680.saradc: nominal=512, value=506
  640. [ 3.487660] saradc c1108680.saradc: nominal=768, value=764
  641. [ 3.487705] saradc c1108680.saradc: nominal=1023, value=1021
  642. [ 3.487708] saradc c1108680.saradc: calibration end: coef=4048
  643. [ 3.487751] remote: Driver init
  644. [ 3.487781] remote: platform_data g_remote_ao_offset=580
  645. [ 3.487783] remote: platform_data irq =228
  646. [ 3.487809] remote: set drvdata completed
  647. [ 3.487819] remote: device_create_file completed
  648. [ 3.488098] input: aml_keypad as /devices/meson-remote.10/input/input0
  649. [ 3.488319] remote: input_register_device completed
  650. [ 3.488352] remote: [0x480] = 0x1dd0190
  651. [ 3.488354] remote: [0x484] = 0xf800ca
  652. [ 3.488356] remote: [0x488] = 0x82006e
  653. [ 3.488358] remote: [0x48c] = 0x3c0030
  654. [ 3.488360] remote: [0x490] = 0x30fa0013
  655. [ 3.488363] remote: [0x498] = 0x6f19000
  656. [ 3.488365] remote: [0x49c] = 0xbe40
  657. [ 3.488367] remote: [0x580] = 0xfa00a0
  658. [ 3.488369] remote: [0x584] = 0xfa00a0
  659. [ 3.488371] remote: [0x588] = 0xfa00a0
  660. [ 3.488373] remote: [0x58c] = 0x640030
  661. [ 3.488375] remote: [0x590] = 0x30fa0013
  662. [ 3.488377] remote: [0x598] = 0x961b800
  663. [ 3.488379] remote: [0x59c] = 0x9740
  664. [ 3.488381] remote: [0x5a0] = 0x104
  665. [ 3.488383] remote: [0x5a4] = 0x0
  666. [ 3.488385] remote: [0x5a8] = 0x0
  667. [ 3.488387] remote: set_remote_mode[72]
  668. [ 3.488404] remote: remote config major:234
  669. [ 3.488465] remote: physical address:0x33a72000
  670. [ 3.488573] m1-adckp adc_keypad.46: adc_key: faild to get name_len!
  671. [ 3.488592] m1-adckp adc_keypad.46: menu key(139) registed.
  672. [ 3.488595] m1-adckp adc_keypad.46: vol- key(114) registed.
  673. [ 3.488598] m1-adckp adc_keypad.46: vol+ key(115) registed.
  674. [ 3.488601] m1-adckp adc_keypad.46: esc key(1) registed.
  675. [ 3.488603] m1-adckp adc_keypad.46: home key(102) registed.
  676. [ 3.488688] input: adc_keypad as /devices/adc_keypad.46/input/input1
  677. [ 3.488884] gpio-key gpio_keypad.45: gpio_key: 0 name(power) pin()
  678. [ 3.488888] gpio-key gpio_keypad.45: amlogic_gpio_name_map_num pin 0!::
  679. [ 3.488897] gpio-key gpio_keypad.45: gpio_key: 0 power(125)
  680. [ 3.488923] gpio-key gpio_keypad.45: start setup_timer
  681. [ 3.488927] gpio-key gpio_keypad.45: power key(116) registed.
  682. [ 3.489007] input: gpio_keypad as /devices/gpio_keypad.45/input/input2
  683. [ 3.489066] gpio-key gpio_keypad.45: gpio keypad register input device completed.
  684. [ 3.489071] input input2: gpio keypad major:232
  685. [ 3.489223] 6--------------------------------------------------------
  686. [ 3.489225] 6odroid_sysfs_init(321) : Sleep Enable !!
  687. [ 3.489226] 6--------------------------------------------------------
  688. [ 3.489733] adbattery: android dummy battery driver loaded
  689. [ 3.490094] dummy_codec_platform_probe
  690. [ 3.490174] *****enter pcm2bt_codec_probe
  691. [ 3.490341] enter aml_soc_platform_pcm2bt_probe
  692. [ 3.490587] divider=16,frac=33920000,SDMval=4523
  693. [ 3.490699] enter aml_pcm_dai_probe
  694. [ 3.490769] [aml-spdif-dai]enter aml_dai_spdif_init
  695. [ 3.490821] aml_spdif_probe
  696. [ 3.490925] enter spdif_dit_probe
  697. [ 3.491274] enter aml_asoc_init
  698. [ 3.491290] p_aml_audio->hp_disable=1
  699. [ 3.491292] falied to get spk event delay time
  700. [ 3.491293] spk_event delay_time = 0
  701. [ 3.491777] aml_snd_card aml_m8_snd.43: dummy <-> I2S.35 mapping ok
  702. [ 3.491949] aml_snd_card aml_m8_snd.43: dit-hifi <-> SPDIF.36 mapping ok
  703. [ 3.492023] enter aml_pcm2bt_preallocate_dma_buffer stream: 0
  704. [ 3.492060] enter aml_pcm2bt_preallocate_dma_buffer stream: 1
  705. [ 3.492085] aml_snd_card aml_m8_snd.43: pcm2bt-pcm <-> PCM.37 mapping ok
  706. [ 3.588179] input input2: key 116 up
  707. [ 4.333172] audio use jtag pinmux as i2s output, read val =ffffffff
  708. [ 4.343589] GACT probability on
  709. [ 4.346470] Mirror/redirect action on
  710. [ 4.350012] u32 classifier
  711. [ 4.352799] Performance counters on
  712. [ 4.356474] input device check on
  713. [ 4.360100] Actions configured
  714. [ 4.363519] TCP: cubic registered
  715. [ 4.366726] NET: Registered protocol family 17
  716. [ 4.371175] NET: Registered protocol family 15
  717. [ 4.375615] Bluetooth: RFCOMM TTY layer initialized
  718. [ 4.380377] Bluetooth: RFCOMM socket layer initialized
  719. [ 4.385461] Bluetooth: RFCOMM ver 1.11
  720. [ 4.389186] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  721. [ 4.394409] Bluetooth: BNEP filters: protocol multicast
  722. [ 4.399619] Bluetooth: BNEP socket layer initialized
  723. [ 4.404501] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  724. [ 4.410377] Bluetooth: HIDP socket layer initialized
  725. [ 4.415295] NET: Registered protocol family 35
  726. [ 4.419843] Key type dns_resolver registered
  727. [ 4.424221] Registering SWP/SWPB emulation handler
  728. [ 4.428911] AppArmor: AppArmor sha1 policy hashing enabled
  729. [ 4.434107] regulator-dummy: disabling
  730. [ 4.437929] aml_vrtc rtc.27: setting system clock to 2015-01-01 00:00:13 UTC (1420070413)
  731. [ 4.447163] input: cec_input as /devices/virtual/input/input3
  732. [ 4.455263] 6enter meson_pm_probe!
  733. [ 4.458810] meson_pm_probe done
  734. [ 4.462435] ALSA device list:
  735. [ 4.465937] #0: AML-M8AUDIO
  736. [ 4.469867] Freeing unused kernel memory: 872K (ffffffc001a79000 - ffffffc001b53000)
  737. [ 4.512575] random: systemd-udevd urandom read with 62 bits of entropy available
  738. [ 4.903658] vout_serve: vmode set to 1080p60hz
  739.  
  740. [ 4.911615] vout_serve: don't set the same mode as current.
  741. [ 4.944995] vout_serve: vmode set to 1080p60hz
  742.  
  743. [ 4.952637] vout_serve: don't set the same mode as current.
  744. [ 4.958232] fb: osd0 free scale DISABLE
  745. [ 4.970425] fb: osd[0] enable: 1 (c2_init.sh)
  746. [ 5.136959] switch_vpu_mem_pd: viu_vd1 OFF
  747. [ 5.140953] switch_vpu_mem_pd: afbc_dec OFF
  748. [ 5.144814] switch_vpu_mem_pd: di_post OFF
  749. [ 5.148687] switch_vpu_mem_pd: viu_vd2 OFF
  750. [ 5.160473] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
  751. [ 5.585032] systemd[1]: System time before build time, advancing clock.
  752. [ 5.698321] NET: Registered protocol family 10
  753. [ 5.728297] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  754. [ 5.745365] systemd[1]: Detected architecture arm64.
  755. [ 5.780359] systemd[1]: Set hostname to <odroid64>.
  756. [ 5.817966] ttyS0 use xtal 24000000 change 115200 to 115200
  757. [ 5.871266] systemd-fstab-generator[171]: Failed to create mount unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
  758. [ 6.238155] random: nonblocking pool is initialized
  759. [ 6.272769] systemd[168]: /lib/systemd/system-generators/systemd-fstab-generator failed with error code 1.
  760. [ 6.474856] systemd[1]: Reached target Remote File Systems (Pre).
  761. [ 6.485906] systemd[1]: Reached target Encrypted Volumes.
  762. [ 6.496141] systemd[1]: Listening on udev Control Socket.
  763. [ 6.506414] systemd[1]: Listening on Journal Socket.
  764. [ 6.516583] systemd[1]: Reached target User and Group Name Lookups.
  765. [ 6.527381] systemd[1]: Listening on Syslog Socket.
  766. [ 6.537496] systemd[1]: Reached target Swap.
  767. [ 6.547770] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  768. [ 6.559438] systemd[1]: Listening on fsck to fsckd communication Socket.
  769. [ 6.571015] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  770. [ 6.583466] systemd[1]: Listening on udev Kernel Socket.
  771. [ 6.594092] systemd[1]: Created slice System Slice.
  772. [ 6.605694] systemd[1]: Started Read required files in advance.
  773. [ 6.617341] systemd[1]: Created slice system-serial\x2dgetty.slice.
  774. [ 6.630126] systemd[1]: Starting Remount Root and Kernel File Systems...
  775. [ 6.642545] systemd[1]: Created slice system-getty.slice.
  776. [ 6.655084] systemd[1]: Mounting Debug File System...
  777. [ 6.668449] systemd[1]: Starting Braille Device Support...
  778. [ 6.681353] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  779. [ 6.698002] systemd[1]: Mounting Huge Pages File System...
  780. [ 6.709772] systemd[1]: Created slice User and Session Slice.
  781. [ 6.721220] systemd[1]: Reached target Slices.
  782. [ 6.732767] systemd[1]: Listening on Journal Socket (/dev/log).
  783. [ 6.746163] systemd[1]: Starting Journal Service...
  784. [ 6.759257] systemd[1]: Starting Nameserver information manager...
  785. [ 6.773176] systemd[1]: Starting Uncomplicated firewall...
  786. [ 8.452452] systemd[1]: Starting Load Kernel Modules...
  787. [ 8.466571] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  788. [ 8.509733] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
  789. [ 8.547005] systemd[1]: Mounting POSIX Message Queue File System...
  790. [ 8.552982] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
  791. [ 8.568538] systemd[1]: Mounted POSIX Message Queue File System.
  792. [ 8.579995] systemd[1]: Mounted Debug File System.
  793. [ 8.590848] systemd[1]: Mounted Huge Pages File System.
  794. [ 8.602486] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
  795. [ 8.612075] systemd[1]: ureadahead.service: Unit entered failed state.
  796. [ 8.618444] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
  797. [ 8.625723] systemd[1]: Started Remount Root and Kernel File Systems.
  798. [ 8.638330] systemd[1]: Started Create list of required static device nodes for the current kernel.
  799. [ 8.655688] systemd[1]: Started Uncomplicated firewall.
  800. [ 8.667509] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
  801. [ 8.677447] systemd[1]: Failed to start Load Kernel Modules.
  802. [ 8.695028] systemd[1]: systemd-modules-load.service: Unit entered failed state.
  803. [ 8.702566] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
  804. [ 8.711217] systemd[1]: Started Braille Device Support.
  805. [ 8.724114] systemd[1]: Started Nameserver information manager.
  806. [ 8.737831] systemd[1]: Started Journal Service.
  807. [ 8.938091] systemd-journald[192]: Received request to flush runtime journal from PID 1
  808. [ 9.383878] hdmitx: system: [gpio_read_edid] setptr = 0
  809. [ 9.538713] hdmitx: system: [gpio_read_edid] setptr = 0
  810. [ 9.598259] usbcore: registered new interface driver btusb
  811. [ 9.701271] ionvideo open
  812. [ 9.709387] 00ffffffffffff004c2d7c0b0000000033170103804627780aee91a3544c9926
  813. 0f5054bdef80714f81c0810081809500a9c0b3000101023a801871382d40582c
  814. 450076f23100001e662156aa51001e30468f330076f23100001e000000fd0018
  815. 4b0f5117000a202020202020000000fc0053414d53554e470a202020202001fe
  816.  
  817.  
  818. [ 9.709433] 020325f14d901f04130514031220212207162309070783010000e2000f67030c
  819. 002000b82d011d80d0721c1620102c258076f23100009e011d8018711c162058
  820. 2c250076f23100009e011d00bc52d01e20b828554076f23100001e011d007251
  821. d01e206e28550076f23100001e00000000000000000000000000000000000060
  822.  
  823.  
  824. [ 9.709445] EDID Parser:
  825. [ 9.709482] hdmitx: edid: find IEEEOUT
  826.  
  827. [ 9.709555] i2c-gpio i2c_gpio.33: using pins 153 (SDA) and 154 (SCL)
  828. [ 9.809451] 6aml_m8_set_spk: aml_m8_spk_enabled=0
  829. [ 9.891460] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  830. [ 9.898192] ionvideo_stop_generating!!!!
  831. [ 9.898220] ionvideo release
  832. [ 10.291567] cgroup: new mount options do not match the existing superblock, will be ignored
  833. [ 11.035690] 6aml_m8_set_spk: aml_m8_spk_enabled=0
  834. [ 14.298389] libphy: stmmac-0:00 - Link is Up - 1000/Full
  835. [ 14.299129] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  836. [ 19.618162] WARN::hc_xfer_timeout:2690: hc_xfer_timeout: timeout on channel 13
  837. [ 19.618175] WARN::hc_xfer_timeout:2692: start_hcchar_val 0x00989040
  838. [ 19.618182] WARN::hc_xfer_timeout:2697: chn-13,ep2-IN:type:2,speed:1,len:1088,addr2
  839.  
  840. [ 23.035166] ttyS0 use xtal 24000000 change 115200 to 115200
  841. [ 23.035422] ttyS0 use xtal 24000000 change 115200 to 115200
  842. [ 23.046080] ttyS0 use xtal 24000000 change 115200 to 115200
  843. [ 23.046449] ttyS0 use xtal 24000000 change 115200 to 115200
  844. [ 23.367553] fb: osd[0] canvas.idx =0x40
  845. [ 23.367555] fb: osd[0] canvas.addr=0x3e000000
  846. [ 23.367558] fb: osd[0] canvas.width=7680
  847. [ 23.367559] fb: osd[0] canvas.height=1080
  848. [ 23.370413] fb: osd[0] enable: 0 (Xorg)
  849. [ 24.083117] fb: osd[0] enable: 1 (Xorg)
  850. [ 25.300292] fuse init (API version 7.22)
RAW Paste Data