Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 22:47:19 UTC 2010
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff30000 (usable)
- [ 0.000000] BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x7ff30 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 disabled
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 01800000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037000000 page 2M
- [ 0.000000] 0037000000 - 00373fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
- [ 0.000000] RAMDISK: 37dbf000 - 37fef496
- [ 0.000000] Allocated new RAMDISK: 00100000 - 00330496
- [ 0.000000] Move RAMDISK from 0000000037dbf000 - 0000000037fef495 to 00100000 - 00330495
- [ 0.000000] ACPI: RSDP 000fa850 00021 (v02 ACPIAM)
- [ 0.000000] ACPI: XSDT 7ff30100 0003C (v01 A M I OEMXSDT 06000517 MSFT 00000097)
- [ 0.000000] ACPI: FACP 7ff30290 000F4 (v03 A M I OEMFACP 06000517 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 7ff303e0 03755 (v01 A0058 A0058002 00000002 MSFT 0100000D)
- [ 0.000000] ACPI: FACS 7ff40000 00040
- [ 0.000000] ACPI: APIC 7ff30390 0004A (v01 A M I OEMAPIC 06000517 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 7ff40040 0003F (v01 A M I OEMBIOS 06000517 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1163MB HIGHMEM available.
- [ 0.000000] 883MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 373fe000
- [ 0.000000] low ram: 0 - 373fe000
- [ 0.000000] node 0 low ram: 00000000 - 373fe000
- [ 0.000000] node 0 bootmap 00012000 - 00018e80
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0001000000 - 00014c7bb4] TEXT DATA BSS ==> [0001000000 - 00014c7bb4]
- [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
- [ 0.000000] #5 [00014c8000 - 00014ce230] BRK ==> [00014c8000 - 00014ce230]
- [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] #7 [0000100000 - 0000330496] NEW RAMDISK ==> [0000100000 - 0000330496]
- [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
- [ 0.000000] found SMP MP-table at [c00ff780] ff780
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000373fe
- [ 0.000000] HighMem 0x000373fe -> 0x0007ff30
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0007ff30
- [ 0.000000] On node 0 totalpages: 523967
- [ 0.000000] free_area_init_node: node 0, pgdat c13b2720, node_mem_map c14d0200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1736 pages used for memmap
- [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2327 pages used for memmap
- [ 0.000000] HighMem zone: 295451 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ff80000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34296 r0 d23048 u4194304
- [ 0.000000] pcpu-alloc: s34296 r0 d23048 u4194304 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519872
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=b8b6fded-022b-4100-bf64-ac97bbdc1686 ro vga=792 quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000373fe:0007ff30)
- [ 0.000000] Memory: 2070496k/2096320k available (2499k kernel code, 24472k reserved, 1324k data, 372k init, 1191112k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
- [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- [ 0.000000] .init : 0xc13bd000 - 0xc141a000 ( 372 kB)
- [ 0.000000] .data : 0xc1270fd9 - 0xc13bc320 (1324 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1270fd9 (2499 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:1280
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1802.165 MHz processor.
- [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3604.33 BogoMIPS (lpj=7208660)
- [ 0.004024] Security Framework initialized
- [ 0.004030] SELinux: Disabled at boot.
- [ 0.004037] Mount-cache hash table entries: 512
- [ 0.004154] Initializing cgroup subsys ns
- [ 0.004158] Initializing cgroup subsys cpuacct
- [ 0.004162] Initializing cgroup subsys devices
- [ 0.004165] Initializing cgroup subsys freezer
- [ 0.004167] Initializing cgroup subsys net_cls
- [ 0.004188] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.004190] CPU: L2 Cache: 256K (64 bytes/line)
- [ 0.004195] mce: CPU supports 5 MCE banks
- [ 0.004213] Performance Events: AMD PMU driver.
- [ 0.004219] ... version: 0
- [ 0.004221] ... bit width: 48
- [ 0.004223] ... generic registers: 4
- [ 0.004225] ... value mask: 0000ffffffffffff
- [ 0.004227] ... max period: 00007fffffffffff
- [ 0.004229] ... fixed-purpose events: 0
- [ 0.004231] ... event mask: 000000000000000f
- [ 0.004235] Checking 'hlt' instruction... OK.
- [ 0.020285] SMP alternatives: switching to UP code
- [ 0.023836] Freeing SMP alternatives: 13k freed
- [ 0.023850] ACPI: Core revision 20090903
- [ 0.027769] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.028001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- [ 0.064362] CPU0: AMD Sempron(tm) Processor 3100+ stepping 02
- [ 0.068001] Brought up 1 CPUs
- [ 0.068001] Total of 1 processors activated (3604.33 BogoMIPS).
- [ 0.068001] CPU0 attaching NULL sched-domain.
- [ 0.068001] devtmpfs: initialized
- [ 0.068001] regulator: core version 0.5
- [ 0.068001] NET: Registered protocol family 16
- [ 0.068001] ACPI: bus type pci registered
- [ 0.068001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
- [ 0.068001] PCI: Using configuration type 1 for base access
- [ 0.068001] bio: create slab <bio-0> at 0
- [ 0.068001] ACPI: EC: Look up EC in DSDT
- [ 0.068839] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.072284] ACPI: Interpreter enabled
- [ 0.072288] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.072311] ACPI: Using IOAPIC for interrupt routing
- [ 0.079226] ACPI: No dock devices found.
- [ 0.079342] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.079389] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff]
- [ 0.079483] pci 0000:00:01.0: supports D1
- [ 0.079522] pci 0000:00:0c.0: reg 10 io port: [0xc800-0xc8ff]
- [ 0.079529] pci 0000:00:0c.0: reg 14 32bit mmio: [0xfdf00000-0xfdf000ff]
- [ 0.079564] pci 0000:00:0c.0: supports D1 D2
- [ 0.079567] pci 0000:00:0c.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.079571] pci 0000:00:0c.0: PME# disabled
- [ 0.079604] pci 0000:00:0f.0: reg 10 io port: [0xe800-0xe807]
- [ 0.079610] pci 0000:00:0f.0: reg 14 io port: [0xe400-0xe403]
- [ 0.079617] pci 0000:00:0f.0: reg 18 io port: [0xe000-0xe007]
- [ 0.079624] pci 0000:00:0f.0: reg 1c io port: [0xd800-0xd803]
- [ 0.079631] pci 0000:00:0f.0: reg 20 io port: [0xd400-0xd40f]
- [ 0.079637] pci 0000:00:0f.0: reg 24 io port: [0xd000-0xd0ff]
- [ 0.079701] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
- [ 0.079773] pci 0000:00:10.0: reg 20 io port: [0xdc00-0xdc1f]
- [ 0.079797] pci 0000:00:10.0: supports D1 D2
- [ 0.079799] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.079803] pci 0000:00:10.0: PME# disabled
- [ 0.079847] pci 0000:00:10.1: reg 20 io port: [0xec00-0xec1f]
- [ 0.079870] pci 0000:00:10.1: supports D1 D2
- [ 0.079873] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.079877] pci 0000:00:10.1: PME# disabled
- [ 0.079920] pci 0000:00:10.2: reg 20 io port: [0xc000-0xc01f]
- [ 0.079943] pci 0000:00:10.2: supports D1 D2
- [ 0.079945] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.079950] pci 0000:00:10.2: PME# disabled
- [ 0.079992] pci 0000:00:10.3: reg 20 io port: [0xc400-0xc41f]
- [ 0.080021] pci 0000:00:10.3: supports D1 D2
- [ 0.080023] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.080028] pci 0000:00:10.3: PME# disabled
- [ 0.080057] pci 0000:00:10.4: reg 10 32bit mmio: [0xfde00000-0xfde000ff]
- [ 0.080094] pci 0000:00:10.4: supports D1 D2
- [ 0.080096] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.080101] pci 0000:00:10.4: PME# disabled
- [ 0.080156] HPET not enabled in BIOS. You might try hpet=force boot option
- [ 0.080162] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
- [ 0.080211] pci 0000:00:11.5: reg 10 io port: [0xcc00-0xccff]
- [ 0.080250] pci 0000:00:11.5: supports D1 D2
- [ 0.080281] pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
- [ 0.080421] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
- [ 0.080426] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff]
- [ 0.080431] pci 0000:01:00.0: reg 18 32bit mmio: [0xfb000000-0xfbffffff]
- [ 0.080442] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfda00000-0xfda1ffff]
- [ 0.080481] pci 0000:00:01.0: bridge 32bit mmio: [0xf9900000-0xfdafffff]
- [ 0.080486] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd1800000-0xf17fffff]
- [ 0.080493] pci_bus 0000:00: on NUMA node 0
- [ 0.080497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.085961] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
- [ 0.086054] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15)
- [ 0.086145] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
- [ 0.086237] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.086328] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.086418] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.086508] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.086599] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.086698] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.086701] vgaarb: loaded
- [ 0.086777] PCI: Using ACPI for IRQ routing
- [ 0.086942] Switching to clocksource tsc
- [ 0.088001] pnp: PnP ACPI init
- [ 0.088001] ACPI: bus type pnp registered
- [ 0.088001] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.088001] pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
- [ 0.089471] pnp: PnP ACPI: found 15 devices
- [ 0.089473] ACPI: ACPI bus type pnp unregistered
- [ 0.089478] PnPBIOS: Disabled by ACPI PNP
- [ 0.089491] system 00:09: ioport range 0x295-0x296 has been reserved
- [ 0.089495] system 00:09: ioport range 0x3e1-0x3e7 has been reserved
- [ 0.089498] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.089502] system 00:09: ioport range 0x800-0x87f has been reserved
- [ 0.089505] system 00:09: ioport range 0x400-0x41f has been reserved
- [ 0.089512] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.089516] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.089520] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved
- [ 0.089526] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
- [ 0.089530] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
- [ 0.089533] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.089537] system 00:0e: iomem range 0x100000-0x7ffeffff could not be reserved
- [ 0.124266] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.124269] pci 0000:00:01.0: IO window: disabled
- [ 0.124275] pci 0000:00:01.0: MEM window: 0xf9900000-0xfdafffff
- [ 0.124279] pci 0000:00:01.0: PREFETCH window: 0xd1800000-0xf17fffff
- [ 0.124293] pci 0000:00:01.0: setting latency timer to 64
- [ 0.124298] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.124302] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.124305] pci_bus 0000:01: resource 1 mem: [0xf9900000-0xfdafffff]
- [ 0.124308] pci_bus 0000:01: resource 2 pref mem [0xd1800000-0xf17fffff]
- [ 0.124345] NET: Registered protocol family 2
- [ 0.124440] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.124801] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.125613] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.126015] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.126019] TCP reno registered
- [ 0.126113] NET: Registered protocol family 1
- [ 0.126131] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
- [ 0.153064] pci 0000:01:00.0: Boot video device
- [ 0.153120] Unpacking initramfs...
- [ 0.216025] Freeing initrd memory: 2241k freed
- [ 0.218025] audit: initializing netlink socket (disabled)
- [ 0.218041] type=2000 audit(1289688940.217:1): initialized
- [ 0.221782] highmem bounce pool size: 64 pages
- [ 0.221787] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.223235] VFS: Disk quotas dquot_6.5.2
- [ 0.223291] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.223359] msgmni has been set to 1723
- [ 0.223535] alg: No test for stdrng (krng)
- [ 0.223586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.223589] io scheduler noop registered
- [ 0.223591] io scheduler anticipatory registered
- [ 0.223593] io scheduler deadline registered
- [ 0.223629] io scheduler cfq registered (default)
- [ 0.223860] vesafb: framebuffer at 0xe0000000, mapped to 0xf7c80000, using 3072k, total 3072k
- [ 0.223864] vesafb: mode is 1024x768x32, linelength=4096, pages=0
- [ 0.223866] vesafb: scrolling: redraw
- [ 0.223870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.295109] Console: switching to colour frame buffer device 128x48
- [ 0.366192] fb0: VESA VGA frame buffer device
- [ 0.366237] isapnp: Scanning for PnP cards...
- [ 0.676393] isapnp: No Plug & Play device found
- [ 0.677707] Linux agpgart interface v0.103
- [ 0.677753] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
- [ 0.679721] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
- [ 0.679813] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.679905] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.679998] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 0.680291] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 0.680405] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.680537] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.680539] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.680719] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.680805] mice: PS/2 mouse device common for all mice
- [ 0.680851] rtc_cmos 00:02: RTC can wake from S4
- [ 0.680887] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 0.680938] rtc0: alarms up to one year, y3k, 114 bytes nvram
- [ 0.680950] cpuidle: using governor ladder
- [ 0.680953] cpuidle: using governor menu
- [ 0.680957] No iBFT detected.
- [ 0.681372] TCP cubic registered
- [ 0.681518] NET: Registered protocol family 10
- [ 0.682034] lo: Disabled Privacy Extensions
- [ 0.682415] Mobile IPv6
- [ 0.682418] NET: Registered protocol family 17
- [ 0.682436] Using IPI No-Shortcut mode
- [ 0.682507] PM: Resume from disk failed.
- [ 0.682518] registered taskstats version 1
- [ 0.682800] rtc_cmos 00:02: setting system clock to 2010-11-13 22:55:41 UTC (1289688941)
- [ 0.682828] Initalizing network drop monitor service
- [ 0.682854] Freeing unused kernel memory: 372k freed
- [ 0.683150] Write protecting the kernel text: 2500k
- [ 0.683174] Write protecting the kernel read-only data: 924k
- [ 0.699894] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 0.705304] udev[46]: starting version 163
- [ 0.902528] SCSI subsystem initialized
- [ 0.926079] libata version 3.00 loaded.
- [ 0.929102] sata_via 0000:00:0f.0: version 2.4
- [ 0.929123] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
- [ 0.929181] sata_via 0000:00:0f.0: routed to hard irq line 5
- [ 0.929264] scsi0 : sata_via
- [ 0.929441] scsi1 : sata_via
- [ 0.929478] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20
- [ 0.929482] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20
- [ 1.128013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.292892] ata1.00: ATA-7: WDC WD360ADFD-00NLR1, 20.07P20, max UDMA/133
- [ 1.292896] ata1.00: 72303840 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.308922] ata1.00: configured for UDMA/133
- [ 1.309028] scsi 0:0:0:0: Direct-Access ATA WDC WD360ADFD-00 20.0 PQ: 0 ANSI: 5
- [ 1.512011] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.717139] ata2.00: ATA-7: ST3750640AS, 3.AAE, max UDMA/133
- [ 1.717143] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.800459] ata2.00: configured for UDMA/133
- [ 1.800553] scsi 1:0:0:0: Direct-Access ATA ST3750640AS 3.AA PQ: 0 ANSI: 5
- [ 1.810435] sd 0:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
- [ 1.810487] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.810491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.810514] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.810642] sda:
- [ 1.810834] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- [ 1.810883] sd 1:0:0:0: [sdb] Write Protect is off
- [ 1.810886] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.810907] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.811024] sdb: sda1 sda2
- [ 1.832346] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.848447] sdb1
- [ 1.848959] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 2.048858] PM: Starting manual resume from disk
- [ 2.048864] PM: Resume from partition 8:2
- [ 2.048866] PM: Checking hibernation image.
- [ 2.049032] PM: Error -22 checking image file
- [ 2.049034] PM: Resume from disk failed.
- [ 2.085736] kjournald starting. Commit interval 5 seconds
- [ 2.085746] EXT3-fs: mounted filesystem with ordered data mode.
- [ 3.056675] udev[271]: starting version 163
- [ 3.441526] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 3.441539] ACPI: Power Button [PWRB]
- [ 3.441614] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- [ 3.441620] ACPI: Sleep Button [SLPB]
- [ 3.441684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 3.441688] ACPI: Power Button [PWRF]
- [ 3.444304] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 3.444329] 8139cp 0000:00:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- [ 3.506113] Floppy drive(s): fd0 is 1.44M
- [ 3.507460] 8139too Fast Ethernet driver 0.9.28
- [ 3.507497] 8139too 0000:00:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 3.514856] eth0: RealTek RTL8139 at 0xc800, 00:19:cb:54:e1:61, IRQ 17
- [ 3.523910] FDC 0 is a post-1991 82077
- [ 3.645085] processor LNXCPU:00: registered as cooling_device0
- [ 3.650707] pata_via 0000:00:0f.1: version 0.3.4
- [ 3.650725] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 3.656966] scsi2 : pata_via
- [ 3.659996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 3.664854] scsi3 : pata_via
- [ 3.666496] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
- [ 3.666500] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
- [ 3.740553] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 3.741136] parport_pc 00:07: reported by Plug and Play ACPI
- [ 3.741177] parport0: PC-style at 0x378, irq 7 [PCSPP]
- [ 3.754391] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 890kHz
- [ 3.828524] ata3.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.29, max UDMA/66
- [ 3.844447] ata3.00: configured for UDMA/66
- [ 3.857533] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.29 PQ: 0 ANSI: 5
- [ 3.933305] usbcore: registered new interface driver usbfs
- [ 3.933551] usbcore: registered new interface driver hub
- [ 3.935091] usbcore: registered new device driver usb
- [ 3.937984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.938021] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
- [ 3.938047] ehci_hcd 0000:00:10.4: EHCI Host Controller
- [ 3.938071] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
- [ 3.938134] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfde00000
- [ 3.948016] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
- [ 3.948055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.948059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.948062] usb usb1: Product: EHCI Host Controller
- [ 3.948065] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
- [ 3.948067] usb usb1: SerialNumber: 0000:00:10.4
- [ 3.948254] usb usb1: configuration #1 chosen from 1 choice
- [ 3.948323] hub 1-0:1.0: USB hub found
- [ 3.948335] hub 1-0:1.0: 8 ports detected
- [ 4.399477] nvidia: module license 'NVIDIA' taints kernel.
- [ 4.399482] Disabling lock debugging due to kernel taint
- [ 5.475937] usb 1-4: new high speed USB device using ehci_hcd and address 4
- [ 5.495524] uhci_hcd: USB Universal Host Controller Interface driver
- [ 5.495588] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 5.495598] uhci_hcd 0000:00:10.0: UHCI Host Controller
- [ 5.495614] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
- [ 5.495640] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
- [ 5.495685] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 5.495688] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.495691] usb usb2: Product: UHCI Host Controller
- [ 5.495694] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
- [ 5.495697] usb usb2: SerialNumber: 0000:00:10.0
- [ 5.496584] usb usb2: configuration #1 chosen from 1 choice
- [ 5.496723] hub 2-0:1.0: USB hub found
- [ 5.496735] hub 2-0:1.0: 2 ports detected
- [ 5.496804] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 5.496814] uhci_hcd 0000:00:10.1: UHCI Host Controller
- [ 5.496827] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
- [ 5.496853] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000ec00
- [ 5.496894] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 5.496897] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.496900] usb usb3: Product: UHCI Host Controller
- [ 5.496903] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
- [ 5.496905] usb usb3: SerialNumber: 0000:00:10.1
- [ 5.497047] usb usb3: configuration #1 chosen from 1 choice
- [ 5.497113] hub 3-0:1.0: USB hub found
- [ 5.497123] hub 3-0:1.0: 2 ports detected
- [ 5.497172] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 5.497179] uhci_hcd 0000:00:10.2: UHCI Host Controller
- [ 5.497186] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
- [ 5.497208] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
- [ 5.497244] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 5.497247] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.497250] usb usb4: Product: UHCI Host Controller
- [ 5.497253] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
- [ 5.497255] usb usb4: SerialNumber: 0000:00:10.2
- [ 5.498058] usb usb4: configuration #1 chosen from 1 choice
- [ 5.498192] hub 4-0:1.0: USB hub found
- [ 5.498203] hub 4-0:1.0: 2 ports detected
- [ 5.498279] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 5.498288] uhci_hcd 0000:00:10.3: UHCI Host Controller
- [ 5.498297] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
- [ 5.498323] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
- [ 5.498364] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 5.498367] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.498370] usb usb5: Product: UHCI Host Controller
- [ 5.498373] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
- [ 5.498375] usb usb5: SerialNumber: 0000:00:10.3
- [ 5.499193] usb usb5: configuration #1 chosen from 1 choice
- [ 5.754340] hub 5-0:1.0: USB hub found
- [ 5.754359] hub 5-0:1.0: 2 ports detected
- [ 5.790741] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 5.790752] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 5.791383] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.12 Fri Oct 8 13:22:24 PDT 2010
- [ 5.985258] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- [ 5.988047] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
- [ 5.988992] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
- [ 5.988996] Uniform CD-ROM driver Revision: 3.20
- [ 5.989104] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 6.075603] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 6.076208] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 6.076779] sr 2:0:0:0: Attached scsi generic sg2 type 5
- [ 6.503663] codec_read: codec 0 is not valid [0xfe0000]
- [ 6.511949] codec_read: codec 0 is not valid [0xfe0000]
- [ 6.520074] codec_read: codec 0 is not valid [0xfe0000]
- [ 6.528190] codec_read: codec 0 is not valid [0xfe0000]
- [ 6.542075] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
- [ 6.542085] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- [ 7.292013] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
- [ 7.796221] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
- [ 7.796236] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
- [ 20.584013] usb 1-4: device descriptor read/64, error -110
- [ 35.800014] usb 1-4: device descriptor read/64, error -110
- [ 36.016012] usb 1-4: new high speed USB device using ehci_hcd and address 5
- [ 51.128012] usb 1-4: device descriptor read/64, error -110
- [ 66.344015] usb 1-4: device descriptor read/64, error -110
- [ 66.560008] usb 1-4: new high speed USB device using ehci_hcd and address 6
- [ 71.580137] usb 1-4: device descriptor read/8, error -110
- [ 76.700105] usb 1-4: device descriptor read/8, error -110
- [ 76.916009] usb 1-4: new high speed USB device using ehci_hcd and address 7
- [ 81.936078] usb 1-4: device descriptor read/8, error -110
- [ 87.056046] usb 1-4: device descriptor read/8, error -110
- [ 87.160018] hub 1-0:1.0: unable to enumerate USB device on port 4
- [ 87.284009] usb 1-7: new high speed USB device using ehci_hcd and address 8
- [ 87.418300] usb 1-7: New USB device found, idVendor=058f, idProduct=6362
- [ 87.418304] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 87.418307] usb 1-7: Product: Mass Storage Device
- [ 87.418309] usb 1-7: Manufacturer: Generic
- [ 87.418312] usb 1-7: SerialNumber: 058F312D81B
- [ 87.418498] usb 1-7: configuration #1 chosen from 1 choice
- [ 87.579893] Initializing USB Mass Storage driver...
- [ 87.579993] scsi4 : SCSI emulation for USB Mass Storage devices
- [ 87.580150] usbcore: registered new interface driver usb-storage
- [ 87.580153] USB Mass Storage support registered.
- [ 87.581084] usb-storage: device found at 8
- [ 87.581087] usb-storage: waiting for device to settle before scanning
- [ 87.656041] usb 2-2: new full speed USB device using uhci_hcd and address 2
- [ 87.826322] usb 2-2: New USB device found, idVendor=041e, idProduct=4053
- [ 87.826328] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 87.826431] usb 2-2: configuration #1 chosen from 1 choice
- [ 87.881019] Linux video capture interface: v2.00
- [ 87.905113] gspca: main v2.7.0 registered
- [ 87.931199] gspca: probing 041e:4053
- [ 87.931205] zc3xx: Sensor Tas5130 (VF0250)
- [ 87.935349] gspca: probe ok
- [ 87.935365] usbcore: registered new interface driver zc3xx
- [ 87.935368] zc3xx: registered
- [ 87.940038] usb 3-1: new low speed USB device using uhci_hcd and address 2
- [ 88.089033] Adding 987988k swap on /dev/sda2. Priority:-1 extents:1 across:987988k
- [ 88.116495] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e
- [ 88.116499] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 88.116503] usb 3-1: Product: USB-PS/2 Optical Mouse
- [ 88.116505] usb 3-1: Manufacturer: Logitech
- [ 88.116615] usb 3-1: configuration #1 chosen from 1 choice
- [ 88.152697] usbcore: registered new interface driver hiddev
- [ 88.165897] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input4
- [ 88.166096] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1/input0
- [ 88.166128] usbcore: registered new interface driver usbhid
- [ 88.166367] usbhid: v2.6:USB HID core driver
- [ 88.360042] usb 3-2: new full speed USB device using uhci_hcd and address 3
- [ 88.361912] EXT3 FS on sda1, internal journal
- [ 88.460416] loop: module loaded
- [ 88.501342] w83627hf: Found W83697HF chip at 0x290
- [ 89.083263] kjournald starting. Commit interval 5 seconds
- [ 89.083615] EXT3 FS on sdb1, internal journal
- [ 89.083621] EXT3-fs: mounted filesystem with ordered data mode.
- [ 89.695860] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
- [ 90.038741] RPC: Registered udp transport module.
- [ 90.038745] RPC: Registered tcp transport module.
- [ 90.038747] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 90.321717] Slow work thread pool: Starting up
- [ 90.321764] Slow work thread pool: Ready
- [ 90.321830] FS-Cache: Loaded
- [ 90.390650] FS-Cache: Netfs 'nfs' registered for caching
- [ 90.440397] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 92.580179] usb-storage: device scan complete
- [ 92.580787] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
- [ 92.581282] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
- [ 92.581781] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
- [ 92.582281] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
- [ 92.583380] sd 4:0:0:0: Attached scsi generic sg3 type 0
- [ 92.583986] sd 4:0:0:1: Attached scsi generic sg4 type 0
- [ 92.584780] sd 4:0:0:2: Attached scsi generic sg5 type 0
- [ 92.585407] sd 4:0:0:3: Attached scsi generic sg6 type 0
- [ 92.589667] sd 4:0:0:0: [sdc] Attached SCSI removable disk
- [ 92.591542] sd 4:0:0:1: [sdd] Attached SCSI removable disk
- [ 92.594042] sd 4:0:0:2: [sde] Attached SCSI removable disk
- [ 92.594778] sd 4:0:0:3: [sdf] Attached SCSI removable disk
- [ 92.686131] fuse init (API version 7.13)
- [ 93.165890] svc: failed to register lockdv1 RPC service (errno 97).
- [ 93.167931] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 93.184073] NFSD: starting 90-second grace period
- [ 99.712011] eth0: no IPv6 routers present
- [ 103.472011] usb 3-2: device descriptor read/64, error -110
- [ 118.716010] usb 3-2: device descriptor read/64, error -110
- [ 118.960008] usb 3-2: new full speed USB device using uhci_hcd and address 4
- [ 120.308032] hub 3-0:1.0: unable to enumerate USB device on port 2
- [ 123.231710] lp0: using parport0 (interrupt-driven).
- [ 123.253471] ppdev: user-space parallel port driver
- [ 126.047818] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
- [ 126.047832] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
- [ 126.047895] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
- [ 127.233300] powernow-k8: Found 1 AMD Sempron(tm) Processor 3100+ processors (1 cpu cores) (version 2.20.00)
- [ 127.233372] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
- [ 127.233375] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
- [ 127.328259] Marking TSC unstable due to cpufreq changes
- [ 127.328307] Switching to clocksource acpi_pm
- [ 155.368028] usb 1-4: new high speed USB device using ehci_hcd and address 9
- [ 155.520210] usb 1-4: New USB device found, idVendor=03f0, idProduct=4117
- [ 155.520218] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 155.520224] usb 1-4: Product: HP LaserJet 1018
- [ 155.520229] usb 1-4: Manufacturer: Hewlett-Packard
- [ 155.520233] usb 1-4: SerialNumber: KP1Q7V4
- [ 155.520411] usb 1-4: configuration #1 chosen from 1 choice
- [ 155.627191] usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
- [ 155.627225] usbcore: registered new interface driver usblp
- [ 156.758825] usb 1-4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
- [ 161.260149] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
- [ 161.732134] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
- [ 162.212121] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
- [ 166.260112] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
- [ 166.732093] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
- [ 167.212072] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
- [ 171.340062] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
- [ 171.732174] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
- [ 172.212164] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
- [ 176.340148] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
- [ 181.340111] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
- [ 192.624105] usb 1-4: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement