- Oct 18 15:13:04 janis dnsmasq[28493]: started, version 2.59 cache disabled
- Oct 18 15:13:04 janis dnsmasq[28493]: compile time options: IPv6 GNU-getopt DBus i18n DHCP TFTP conntrack IDN
- Oct 18 15:13:04 janis dnsmasq[28493]: using nameserver 131.252.208.56#53
- Oct 18 15:13:04 janis dnsmasq[28493]: using nameserver 131.252.2.53#53
- Oct 18 15:13:04 janis NetworkManager[984]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
- Oct 18 15:13:04 janis NetworkManager[984]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv6 routing and DNS.
- Oct 18 15:17:01 janis CRON[28506]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
- Oct 18 15:36:43 janis avahi-daemon[981]: Invalid response packet from host fe80::216:cbff:fe87:47f4.
- Oct 18 15:36:43 janis avahi-daemon[981]: Invalid response packet from host 131.252.214.226.
- Oct 18 15:36:44 janis avahi-daemon[981]: Invalid response packet from host fe80::216:cbff:fe87:47f4.
- Oct 18 15:36:44 janis avahi-daemon[981]: Invalid response packet from host 131.252.214.226.
- Oct 18 15:36:49 janis avahi-daemon[981]: Invalid response packet from host fe80::216:cbff:fe87:47f4.
- Oct 18 15:36:49 janis avahi-daemon[981]: Invalid response packet from host 131.252.214.226.
- Oct 18 15:37:20 janis dhclient: DHCPREQUEST of 131.252.214.131 on eth0 to 131.252.208.56 port 67
- Oct 18 15:37:20 janis dhclient: DHCPACK of 131.252.214.131 from 131.252.208.56
- Oct 18 15:37:20 janis dhclient: bound to 131.252.214.131 -- renewal in 5611 seconds.
- Oct 18 16:17:01 janis CRON[29929]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
- Oct 18 16:39:41 janis kernel: [697297.508821] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:42 janis kernel: [697298.518558] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:43 janis kernel: [697299.528286] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:44 janis kernel: [697300.538018] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:45 janis kernel: [697301.547750] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:45 janis kernel: [697301.547753] hub 1-1:1.0: Cannot enable port 6. Maybe the USB cable is bad?
- Oct 18 16:39:46 janis kernel: [697302.557480] hub 1-1:1.0: cannot disable port 6 (err = -110)
- Oct 18 16:39:47 janis kernel: [697303.567209] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:48 janis kernel: [697304.576931] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:49 janis kernel: [697305.586631] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:50 janis kernel: [697306.596398] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:51 janis kernel: [697307.606131] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:51 janis kernel: [697307.606133] hub 1-1:1.0: Cannot enable port 6. Maybe the USB cable is bad?
- Oct 18 16:39:52 janis kernel: [697308.615864] hub 1-1:1.0: cannot disable port 6 (err = -110)
- Oct 18 16:39:53 janis kernel: [697309.625598] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:54 janis kernel: [697310.635319] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:55 janis kernel: [697311.645015] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:56 janis kernel: [697312.654788] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:57 janis kernel: [697313.664516] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:39:57 janis kernel: [697313.664519] hub 1-1:1.0: Cannot enable port 6. Maybe the USB cable is bad?
- Oct 18 16:39:58 janis kernel: [697314.674248] hub 1-1:1.0: cannot disable port 6 (err = -110)
- Oct 18 16:39:59 janis kernel: [697315.683979] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:40:00 janis kernel: [697316.693709] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:40:03 janis kernel: [697318.832900] usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
- Oct 18 16:40:13 janis kernel: [697329.065906] usb 1-1.6: device descriptor read/8, error -110
- Oct 18 16:40:18 janis kernel: [697334.186428] usb 1-1.6: device descriptor read/all, error -110
- Oct 18 16:40:19 janis kernel: [697335.196127] hub 1-1:1.0: cannot disable port 6 (err = -110)
- Oct 18 16:40:20 janis kernel: [697336.205853] hub 1-1:1.0: cannot disable port 6 (err = -110)
- Oct 18 16:40:20 janis kernel: [697336.205944] sd 6:0:0:0: Device offlined - not ready after error recovery
- Oct 18 16:40:24 janis kernel: [697340.300661] hub 1-1:1.0: hub_port_status failed (err = -110)
- Oct 18 16:40:26 janis kernel: [697342.662569] usb 1-1.6: USB disconnect, device number 4
- Oct 18 16:40:27 janis kernel: [697343.689047] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:40:28 janis kernel: [697343.977234] Buffer I/O error on device sdb1, logical block 60850176
- Oct 18 16:40:28 janis kernel: [697343.977237] lost page write due to I/O error on sdb1
- Oct 18 16:40:28 janis kernel: [697343.977239] JBD2: I/O error detected when updating journal superblock for sdb1-8.
- Oct 18 16:40:29 janis kernel: [697344.698768] hub 1-1:1.0: cannot reset port 6 (err = -110)
- Oct 18 16:40:29 janis kernel: [697345.616973] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
- Oct 18 16:40:30 janis kernel: [697345.983955] ehci_hcd 0000:00:1a.0: fatal error
- Oct 18 16:40:30 janis kernel: [697345.987844] ehci_hcd 0000:00:1a.0: HC died; cleaning up
- Oct 18 16:40:30 janis kernel: [697345.992732] ehci_hcd 0000:00:1a.0: force halt; handshake ffffc9000064a024 00004000 00004000 -> -110
- Oct 18 16:40:30 janis kernel: [697345.992734] ehci_hcd 0000:00:1a.0: HC died; cleaning up
- Oct 18 16:40:30 janis kernel: [697345.999820] usb 1-1.6: device descriptor read/all, error -108
- Oct 18 16:40:30 janis kernel: [697345.999834] hub 1-1:1.0: cannot disable port 6 (err = -19)
- Oct 18 16:40:30 janis kernel: [697345.999845] hub 1-1:1.0: cannot reset port 6 (err = -19)
- Oct 18 16:40:30 janis kernel: [697345.999849] hub 1-1:1.0: cannot disable port 6 (err = -19)
- Oct 18 16:40:30 janis kernel: [697345.999853] hub 1-1:1.0: cannot reset port 6 (err = -19)
- Oct 18 16:40:30 janis kernel: [697345.999856] hub 1-1:1.0: cannot disable port 6 (err = -19)
- Oct 18 16:40:30 janis kernel: [697345.999860] hub 1-1:1.0: cannot reset port 6 (err = -19)
- Oct 18 16:40:30 janis kernel: [697345.999862] hub 1-1:1.0: cannot disable port 6 (err = -19)
- Oct 18 16:40:30 janis kernel: [697345.999865] hub 1-1:1.0: unable to enumerate USB device on port 6
- Oct 18 16:40:30 janis kernel: [697345.999867] hub 1-1:1.0: cannot disable port 6 (err = -19)
- Oct 18 16:40:30 janis kernel: [697345.999873] usb 1-1.5: USB disconnect, device number 3
- Oct 18 16:40:30 janis kernel: [697346.215507] usb 1-1: USB disconnect, device number 2
- Oct 18 16:44:05 janis NetworkManager[984]: <info> DNS: starting dnsmasq...
- Oct 18 16:44:05 janis dnsmasq[28493]: exiting on receipt of SIGTERM
- Oct 18 16:44:05 janis NetworkManager[984]: <info> (eth0): writing resolv.conf to /sbin/resolvconf
- Oct 18 16:44:05 janis dnsmasq[4820]: started, version 2.59 cache disabled
- Oct 18 16:44:05 janis dnsmasq[4820]: compile time options: IPv6 GNU-getopt DBus i18n DHCP TFTP conntrack IDN
- Oct 18 16:44:05 janis dnsmasq[4820]: using nameserver 131.252.208.56#53
- Oct 18 16:44:05 janis dnsmasq[4820]: using nameserver 131.252.2.53#53
- Oct 18 16:44:05 janis dnsmasq[4820]: exiting on receipt of SIGTERM
- Oct 18 16:44:05 janis NetworkManager[984]: <info> DNS: starting dnsmasq...
- Oct 18 16:44:05 janis NetworkManager[984]: <info> (eth0): writing resolv.conf to /sbin/resolvconf
- Oct 18 16:44:05 janis dnsmasq[4828]: started, version 2.59 cache disabled
- Oct 18 16:44:05 janis dnsmasq[4828]: compile time options: IPv6 GNU-getopt DBus i18n DHCP TFTP conntrack IDN
- Oct 18 16:44:05 janis dnsmasq[4828]: using nameserver 131.252.208.56#53
- Oct 18 16:44:05 janis dnsmasq[4828]: using nameserver 131.252.2.53#53
- Oct 18 16:44:05 janis NetworkManager[984]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
- Oct 18 16:44:05 janis NetworkManager[984]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv6 routing and DNS.
- Oct 18 16:55:43 janis acpid: client connected from 4869[0:0]
- Oct 18 16:55:43 janis acpid: 1 client rule loaded
- Oct 18 16:55:46 janis acpid: client 2674[0:0] has disconnected
- Oct 18 16:55:46 janis acpid: client 2674[0:0] has disconnected
- Oct 18 16:55:46 janis acpid: client connected from 4869[0:0]
- Oct 18 16:55:46 janis acpid: 1 client rule loaded
- Oct 18 16:56:02 janis rtkit-daemon[1839]: Successfully made thread 4978 of process 4978 (n/a) owned by '104' high priority at nice level -11.
- Oct 18 16:56:02 janis rtkit-daemon[1839]: Supervising 5 threads of 2 processes of 2 users.
- Oct 18 16:56:04 janis rtkit-daemon[1839]: Successfully made thread 4979 of process 4978 (n/a) owned by '104' RT at priority 5.
- Oct 18 16:56:04 janis rtkit-daemon[1839]: Supervising 6 threads of 2 processes of 2 users.
- Oct 18 16:56:04 janis rtkit-daemon[1839]: Successfully made thread 4980 of process 4978 (n/a) owned by '104' RT at priority 5.
- Oct 18 16:56:04 janis rtkit-daemon[1839]: Supervising 7 threads of 2 processes of 2 users.
- Oct 18 16:56:04 janis rtkit-daemon[1839]: Successfully made thread 4981 of process 4978 (n/a) owned by '104' RT at priority 5.
- Oct 18 16:56:04 janis rtkit-daemon[1839]: Supervising 8 threads of 2 processes of 2 users.
- Oct 18 16:56:05 janis rtkit-daemon[1839]: Successfully made thread 4984 of process 4984 (n/a) owned by '104' high priority at nice level -11.
- Oct 18 16:56:05 janis rtkit-daemon[1839]: Supervising 9 threads of 3 processes of 2 users.
- Oct 18 16:56:05 janis pulseaudio[4984]: [pulseaudio] pid.c: Daemon already running.
- Oct 18 17:00:11 janis acpid: client 4869[0:0] has disconnected
- Oct 18 17:00:11 janis acpid: client 4869[0:0] has disconnected
- Oct 18 17:00:11 janis acpid: client connected from 2674[0:0]
- Oct 18 17:00:11 janis acpid: 1 client rule loaded
- Oct 18 17:00:12 janis acpid: client connected from 2674[0:0]
- Oct 18 17:00:12 janis acpid: 1 client rule loaded
SHARE
TWEET
Untitled
a guest
Oct 18th, 2012
29
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
RAW Paste Data

