SHARE
TWEET

Untitled

a guest Jul 18th, 2019 255 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ####################################################################################################
  2. # +----------------------------------------------------------------------------------------------+ #
  3. # |                                   __         __   ___  __         __                         | #
  4. # |                        |    |  | /  ` |__/  |__) |__  |__)  |\/| /__`                        | #
  5. # |                        |___ \__/ \__, |  \  |    |___ |  \  |  | .__/                        | #
  6. # |                                                                                              | #
  7. # |                                  https://luckperms.github.io                                 | #
  8. # |                                                                                              | #
  9. # |  SOURCE CODE: https://github.com/lucko/LuckPerms                                             | #
  10. # |  WIKI:        https://github.com/lucko/LuckPerms/wiki                                        | #
  11. # |  BUG REPORTS: https://github.com/lucko/LuckPerms/issues                                      | #
  12. # |                                                                                              | #
  13. # |  Each option in this file is documented and explained here:                                  | #
  14. # |   ==>  https://github.com/lucko/LuckPerms/wiki/Configuration                                 | #
  15. # |                                                                                              | #
  16. # |  New options are not added to this file automatically. Default values are used if an         | #
  17. # |  option cannot be found. The latest config versions can be obtained at the link above.       | #
  18. # +----------------------------------------------------------------------------------------------+ #
  19. ####################################################################################################
  20.  
  21. # +----------------------------------------------------------------------------------------------+ #
  22. # |                                                                                              | #
  23. # |                                      ESSENTIAL SETTINGS                                      | #
  24. # |                                                                                              | #
  25. # |                   Important settings that control how LuckPerms functions.                   | #
  26. # |                                                                                              | #
  27. # +----------------------------------------------------------------------------------------------+ #
  28.  
  29. # The name of the server, used for server specific permissions.
  30. #
  31. # - When set to "global" this setting is effectively ignored.
  32. # - In all other cases, the value here is added to all players in a "server" context.
  33. # - See: https://github.com/lucko/LuckPerms/wiki/Context
  34. server: global
  35.  
  36. # If the servers own UUID cache/lookup facility should be used when there is no record for a player
  37. # already in LuckPerms.
  38. #
  39. # - When this is set to 'false', commands using a player's username will not work unless the player
  40. #   has joined since LuckPerms was first installed.
  41. # - To get around this, you can use a player's uuid directly in the command, or enable this option.
  42. # - When this is set to 'true', the server facility is used. This may use a number of methods,
  43. #   including checking the servers local cache, or making a request to the Mojang API.
  44. use-server-uuid-cache: false
  45.  
  46.  
  47.  
  48.  
  49. # +----------------------------------------------------------------------------------------------+ #
  50. # |                                                                                              | #
  51. # |                                       STORAGE SETTINGS                                       | #
  52. # |                                                                                              | #
  53. # |                Controls which storage method LuckPerms will use to store data.               | #
  54. # |                                                                                              | #
  55. # +----------------------------------------------------------------------------------------------+ #
  56.  
  57. # How the plugin should store data
  58. #
  59. # - The various options are explained in more detail on the wiki:
  60. #   https://github.com/lucko/LuckPerms/wiki/Choosing-a-Storage-type
  61. #
  62. # - Possible options:
  63. #
  64. #   |  Remote databases - require connection information to be configured below
  65. #   |=> MySQL
  66. #   |=> MariaDB (preferred over MySQL)
  67. #   |=> PostgreSQL
  68. #   |=> MongoDB
  69. #
  70. #   |  Flatfile/local database - don't require any extra configuration
  71. #   |=> H2 (preferred over SQLite)
  72. #   |=> SQLite
  73. #
  74. #   |  Readable & editable text files - don't require any extra configuration
  75. #   |=> YAML (.yml files)
  76. #   |=> JSON (.json files)
  77. #   |=> HOCON (.conf files)
  78. #   |=> TOML (.toml files)
  79. #   |
  80. #   | By default, user, group and track data is separated into different files. Data can be combined
  81. #   | and all stored in the same file by switching to a combined storage variant.
  82. #   | Just add '-combined' to the end of the storage-method, e.g. 'yaml-combined'
  83. #
  84. # - A H2 database is the default option.
  85. # - If you want to edit data manually in "traditional" storage files, we suggest using YAML.
  86. storage-method: H2
  87.  
  88. # The following block defines the settings for remote database storage methods.
  89. #
  90. # - You don't need to touch any of the settings here if you're using a local storage method!
  91. # - The connection detail options are shared between all remote storage types.
  92. data:
  93.  
  94.   # Define the address and port for the database.
  95.   # - The standard DB engine port is used by default
  96.   #   (MySQL: 3306, PostgreSQL: 5432, MongoDB: 27017)
  97.   # - Specify as "host:port" if differs
  98.   address: ':3306'
  99.  
  100.   # The name of the database to store LuckPerms data in.
  101.   # - This must be created already. Don't worry about this setting if you're using MongoDB.
  102.   database: serverpro_db
  103.  
  104.   # Credentials for the database.
  105.   username: root
  106.   password: ''
  107.  
  108.   # These settings apply to the MySQL connection pool.
  109.   # - The default values will be suitable for the majority of users.
  110.   # - Do not change these settings unless you know what you're doing!
  111.   pool-settings:
  112.  
  113.     # Sets the maximum size of the MySQL connection pool.
  114.     # - Basically this value will determine the maximum number of actual
  115.     #   connections to the database backend.
  116.     # - More information about determining the size of connection pools can be found here:
  117.     #   https://github.com/brettwooldridge/HikariCP/wiki/About-Pool-Sizing
  118.     maximum-pool-size: 10
  119.  
  120.     # Sets the minimum number of idle connections that the pool will try to maintain.
  121.     # - For maximum performance and responsiveness to spike demands, it is recommended to not set
  122.     #   this value and instead allow the pool to act as a fixed size connection pool.
  123.     #   (set this value to the same as 'maximum-pool-size')
  124.     minimum-idle: 10
  125.  
  126.     # This setting controls the maximum lifetime of a connection in the pool in milliseconds.
  127.     # - The value should be at least 30 seconds less than any database or infrastructure imposed
  128.     #   connection time limit.
  129.     maximum-lifetime: 1800000 # 30 minutes
  130.  
  131.     # This setting controls the maximum number of milliseconds that the plugin will wait for a
  132.     # connection from the pool, before timing out.
  133.     connection-timeout: 180000 # 5 seconds
  134.  
  135.     # This setting allows you to define extra properties for connections.
  136.     properties:
  137.       useUnicode: true
  138.       characterEncoding: utf8
  139.  
  140.   # The prefix for all LuckPerms SQL tables.
  141.   # - Change this is you want to use different tables for different servers.
  142.   table_prefix: 'luckperms_'
  143.  
  144.   # The prefix to use for all LuckPerms collections. Change this if you want to use different
  145.   # collections for different servers. The default is no prefix.
  146.   mongodb_collection_prefix: ''
  147.  
  148.   # MongoDB ClientConnectionURI for use with replica sets and custom connection options
  149.   # - See https://docs.mongodb.com/manual/reference/connection-string/
  150.   mongodb_connection_URI: ''
  151.  
  152. # Define settings for a "split" storage setup.
  153. #
  154. # - This allows you to define a storage method for each type of data.
  155. # - The connection options above still have to be correct for each type here.
  156. split-storage:
  157.   # Don't touch this if you don't want to use split storage!
  158.   enabled: true
  159.   methods:
  160.     # These options don't need to be modified if split storage isn't enabled.
  161.     user: yaml
  162.     group: h2
  163.     track: h2
  164.     uuid: h2
  165.     log: h2
  166.  
  167.  
  168.  
  169.  
  170. # +----------------------------------------------------------------------------------------------+ #
  171. # |                                                                                              | #
  172. # |                            UPDATE PROPAGATION & MESSAGING SERVICE                            | #
  173. # |                                                                                              | #
  174. # |    Controls the ways in which LuckPerms will sync data & notify other servers of changes.    | #
  175. # |     These options are documented on greater detail on the wiki under "Instant Updates".      | #
  176. # |                                                                                              | #
  177. # +----------------------------------------------------------------------------------------------+ #
  178.  
  179. # This option controls how frequently LuckPerms will perform a sync task.
  180. #
  181. # - A sync task will refresh all data from the storage, and ensure that the most up-to-date data is
  182. #   being used by the plugin.
  183. # - This is disabled by default, as most users will not need it. However, if you're using a remote
  184. #   storage type without a messaging service setup, you may wish to set this to something like 3.
  185. # - Set to -1 to disable the task completely.
  186. sync-minutes: -1
  187.  
  188. # If the file watcher should be enabled.
  189. #
  190. # - When using a file-based storage type, LuckPerms can monitor the data files for changes, and
  191. #   automatically update when changes are detected.
  192. # - If you don't want this feature to be active, set this option to false.
  193. watch-files: true
  194.  
  195. # Define which messaging service should be used by the plugin.
  196. #
  197. # - If enabled and configured, LuckPerms will use the messaging service to inform other connected
  198. #   servers of changes.
  199. # - Use the command "/lp networksync" to manually push changes.
  200. # - Data is NOT stored using this service. It is only used as a messaging platform.
  201. #
  202. # - If you decide to enable this feature, you should set "sync-minutes" to -1, as there is no need
  203. #   for LuckPerms to poll the database for changes.
  204. #
  205. # - Possible options:
  206. #   => sql       Uses the SQL database to form a queue system for communication. Will only work when
  207. #                'storage-method' is set to MySQL or MariaDB. This is chosen by default if the
  208. #                option is set to 'none' and SQL storage is in use. Set to 'notsql' to disable this.
  209. #   => pluginmsg Uses the plugin messaging channels to communicate with the proxy.
  210. #                LuckPerms must be installed on your proxy & all connected servers backend servers.
  211. #                Won't work if you have more than one proxy.
  212. #   => lilypad   Uses LilyPad pub-sub to push changes. You need to have the LilyPad-Connect plugin
  213. #                installed.
  214. #   => redis     Uses Redis pub-sub to push changes. Your server connection info must be configured
  215. #                below.
  216. #   => none      Disables the service.
  217. messaging-service: none
  218.  
  219. # If LuckPerms should automatically push updates after a change has been made with a command.
  220. auto-push-updates: true
  221.  
  222. # If LuckPerms should push logging entries to connected servers via the messaging service.
  223. push-log-entries: true
  224.  
  225. # If LuckPerms should broadcast received logging entries to players on this platform.
  226. #
  227. # - If you have LuckPerms installed on your backend servers as well as a BungeeCord proxy, you
  228. #   should set this option to false on either your backends or your proxies, to avoid players being
  229. #   messaged twice about log entries.
  230. broadcast-received-log-entries: true
  231.  
  232. # Settings for Redis.
  233. # Port 6379 is used by default; set address to "host:port" if differs
  234. redis:
  235.   enabled: false
  236.   address: localhost
  237.   password: ''
  238.  
  239.  
  240.  
  241.  
  242. # +----------------------------------------------------------------------------------------------+ #
  243. # |                                                                                              | #
  244. # |                                    CUSTOMIZATION SETTINGS                                    | #
  245. # |                                                                                              | #
  246. # |              Settings that allow admins to customize the way LuckPerms operates.             | #
  247. # |                                                                                              | #
  248. # +----------------------------------------------------------------------------------------------+ #
  249.  
  250. # Controls how temporary permissions/parents/meta should be accumulated.
  251. #
  252. # - The default behaviour is "deny".
  253. # - This behaviour can also be specified when the command is executed. See the command usage
  254. #   documentation for more info.
  255. #
  256. # - Possible options:
  257. #   => accumulate   durations will be added to the existing expiry time
  258. #   => replace      durations will be replaced if the new duration is later than the current
  259. #                   expiration
  260. #   => deny         the command will just fail if you try to add another node with the same expiry
  261. temporary-add-behaviour: deny
  262.  
  263. # Controls how LuckPerms will determine a users "primary" group.
  264. #
  265. # - The meaning and influence of "primary groups" are explained in detail on the wiki.
  266. # - The preferred approach is to let LuckPerms automatically determine a users primary group
  267. #   based on the relative weight of their parent groups.
  268. #
  269. # - Possible options:
  270. #   => stored                  use the value stored against the users record in the file/database
  271. #   => parents-by-weight       just use the users most highly weighted parent
  272. #   => all-parents-by-weight   same as above, but calculates based upon all parents inherited from
  273. #                              both directly and indirectly
  274. primary-group-calculation: parents-by-weight
  275.  
  276. # If the plugin should check for "extra" permissions with users run LP commands.
  277. #
  278. # - These extra permissions allow finer control over what users can do with each command, and who
  279. #   they have access to edit.
  280. # - The nature of the checks are documented on the wiki under "Argument based command permissions".
  281. # - Argument based permissions are *not* static, unlike the 'base' permissions, and will depend upon
  282. #   the arguments given within the command.
  283. argument-based-command-permissions: false
  284.  
  285. # If the plugin should check whether senders are a member of a given group before they're able to
  286. # edit the groups data or add/remove other users to/from it.
  287. # Note: these limitations do not apply to the web editor!
  288. require-sender-group-membership-to-modify: false
  289.  
  290. # If the plugin should send log notifications to users whenever permissions are modified.
  291. #
  292. # - Notifications are only sent to those with the appropriate permission to receive them
  293. # - They can also be temporarily enabled/disabled on a per-user basis using
  294. #   '/lp log notify <on|off>'
  295. log-notify: true
  296.  
  297. # Defines the options for prefix and suffix stacking.
  298. #
  299. # - The feature allows you to display multiple prefixes or suffixes alongside a players username in
  300. #   chat.
  301. # - It is explained and documented in more detail on the wiki under "Prefix & Suffix Stacking".
  302. #
  303. # - The options are divided into separate sections for prefixes and suffixes.
  304. # - The 'duplicates' setting refers to how duplicate elements are handled. Can be 'retain-all',
  305. #   'first-only' or 'last-only'.
  306. # - The value of 'start-spacer' is included at the start of the resultant prefix/suffix.
  307. # - The value of 'end-spacer' is included at the end of the resultant prefix/suffix.
  308. # - The value of 'middle-spacer' is included between each element in the resultant prefix/suffix.
  309. #
  310. # - Possible format options:
  311. #   => highest                        Selects the value with the highest weight, from all values
  312. #                                     held by or inherited by the player.
  313. #
  314. #   => lowest                         Same as above, except takes the one with the lowest weight.
  315. #
  316. #   => highest_own                    Selects the value with the highest weight, but will not
  317. #                                     accept any inherited values.
  318. #
  319. #   => lowest_own                     Same as above, except takes the value with the lowest weight.
  320. #
  321. #   => highest_inherited              Selects the value with the highest weight, but will only
  322. #                                     accept inherited values.
  323. #
  324. #   => lowest_inherited               Same as above, except takes the value with the lowest weight.
  325. #
  326. #   => highest_on_track_<track>       Selects the value with the highest weight, but only if the
  327. #                                     value was inherited from a group on the given track.
  328. #
  329. #   => lowest_on_track_<track>        Same as above, except takes the value with the lowest weight.
  330. #
  331. #   => highest_not_on_track_<track>   Selects the value with the highest weight, but only if the
  332. #                                     value was inherited from a group not on the given track.
  333. #
  334. #   => lowest_not_on_track_<track>    Same as above, except takes the value with the lowest weight.
  335. meta-formatting:
  336.   prefix:
  337.     format:
  338.       - "highest_on_track_prestige"
  339.       - "highest_on_track_mine"
  340.       - "highest_on_track_donor"
  341.       - "highest_on_track_staff"
  342.     duplicates: first-only
  343.     start-spacer: ""
  344.     middle-spacer: ""
  345.     end-spacer: ""
  346.   suffix:
  347.     format:
  348.       - "highest"
  349.     duplicates: first-only
  350.     start-spacer: ""
  351.     middle-spacer: " "
  352.     end-spacer: ""
  353.  
  354.  
  355.  
  356.  
  357. # +----------------------------------------------------------------------------------------------+ #
  358. # |                                                                                              | #
  359. # |                            PERMISSION CALCULATION AND INHERITANCE                            | #
  360. # |                                                                                              | #
  361. # |    Modify the way permission checks, meta lookups and inheritance resolutions are handled.   | #
  362. # |                                                                                              | #
  363. # +----------------------------------------------------------------------------------------------+ #
  364.  
  365. # The algorithm LuckPerms should use when traversing the "inheritance tree".
  366. #
  367. # - Possible options:
  368. #   => breadth-first            See: https://en.wikipedia.org/wiki/Breadth-first_search
  369. #   => depth-first-pre-order    See: https://en.wikipedia.org/wiki/Depth-first_search
  370. #   => depth-first-post-order   See: https://en.wikipedia.org/wiki/Depth-first_search
  371. inheritance-traversal-algorithm: depth-first-pre-order
  372.  
  373. # +----------------------------------------------------------------------------------------------+ #
  374. # | Permission resolution settings                                                               | #
  375. # +----------------------------------------------------------------------------------------------+ #
  376.  
  377. # If users on this server should have their global permissions applied.
  378. # When set to false, only server specific permissions will apply for users on this server
  379. include-global: true
  380.  
  381. # If users on this server should have their global world permissions applied.
  382. # When set to false, only world specific permissions will apply for users on this server
  383. include-global-world: true
  384.  
  385. # If users on this server should have global (non-server specific) groups applied
  386. apply-global-groups: true
  387.  
  388. # If users on this server should have global (non-world specific) groups applied
  389. apply-global-world-groups: true
  390.  
  391. # +----------------------------------------------------------------------------------------------+ #
  392. # | Inheritance settings                                                                         | #
  393. # +----------------------------------------------------------------------------------------------+ #
  394.  
  395. # If the plugin should apply wildcard permissions.
  396. #
  397. # - If set to true, LuckPerms will detect wildcard permissions, and resolve & apply all registered
  398. #   permissions matching the wildcard.
  399. apply-wildcards: true
  400.  
  401. # If the plugin should parse regex permissions.
  402. #
  403. # - If set to true, LuckPerms will detect regex permissions, marked with "r=" at the start of the
  404. #   node, and resolve & apply all registered permissions matching the regex.
  405. apply-regex: true
  406.  
  407. # If the plugin should complete and apply shorthand permissions.
  408. #
  409. # - If set to true, LuckPerms will detect and expand shorthand node patterns.
  410. apply-shorthand: true
  411.  
  412. # If the plugin should apply Bukkit child permissions.
  413. #
  414. # - Plugin authors can define custom permissions structures for their plugin, which will be resolved
  415. #   and used by LuckPerms if this setting is enabled.
  416. apply-bukkit-child-permissions: true
  417.  
  418. # If the plugin should apply Bukkit default permissions.
  419. #
  420. # - Plugin authors can define permissions which should be given to all users by default, or setup
  421. #   permissions which should/shouldn't be given to opped players.
  422. # - If this option is set to false, LuckPerms will ignore these defaults.
  423. apply-bukkit-default-permissions: true
  424.  
  425. # If the plugin should apply attachment permissions.
  426. #
  427. # - Other plugins on the server are able to add their own "permission attachments" to players.
  428. # - This allows them to grant players additional permissions which last until the end of the
  429. #   session, or until they're removed.
  430. # - If this option is set to false, LuckPerms will not include these attachment permissions when
  431. #   considering if a player should have access to a certain permission.
  432. apply-bukkit-attachment-permissions: true
  433.  
  434. # +----------------------------------------------------------------------------------------------+ #
  435. # | Extra settings                                                                               | #
  436. # +----------------------------------------------------------------------------------------------+ #
  437.  
  438. # Allows you to set "aliases" for the worlds sent forward for context calculation.
  439. #
  440. # - These aliases are provided in addition to the real world name. Applied recursively.
  441. # - Remove the comment characters for the default aliases to apply.
  442. world-rewrite:
  443. #  world_nether: world
  444. #  world_the_end: world
  445.  
  446. # Define special group weights for this server.
  447. #
  448. # - Group weights can also be applied directly to group data, using the setweight command.
  449. # - This section allows weights to be set on a per-server basis.
  450. group-weight:
  451. #  admin: 10
  452.  
  453.  
  454.  
  455.  
  456. # +----------------------------------------------------------------------------------------------+ #
  457. # |                                                                                              | #
  458. # |                                      FINE TUNING OPTIONS                                     | #
  459. # |                                                                                              | #
  460. # |     A number of more niche settings for tweaking and changing behaviour. The section also    | #
  461. # | contains toggles for some more specialised features. It is only necessary to make changes to | #
  462. # |                  these options if you want to fine-tune LuckPerms behaviour.                 | #
  463. # |                                                                                              | #
  464. # +----------------------------------------------------------------------------------------------+ #
  465.  
  466. # +----------------------------------------------------------------------------------------------+ #
  467. # | Server Operator (OP) settings                                                                | #
  468. # +----------------------------------------------------------------------------------------------+ #
  469.  
  470. # Controls whether server operators should exist at all.
  471. #
  472. # - When set to 'false', all players will be de-opped, and the /op and /deop commands will be
  473. #   disabled.
  474. enable-ops: true
  475.  
  476. # Enables or disables a special permission based system in LuckPerms for controlling OP status.
  477. #
  478. # - If set to true, any user with the permission "luckperms.autoop" will automatically be granted
  479. #   server operator status. This permission can be inherited, or set on specific servers/worlds,
  480. #   temporarily, etc.
  481. # - Additionally, setting this to true will force the "enable-ops" option above to false. All users
  482. #   will be de-opped unless they have the permission node, and the op/deop commands will be
  483. #   disabled.
  484. # - It is recommended that you use this option instead of assigning a single '*' permission.
  485. auto-op: false
  486.  
  487. # Defines if "opped" players should be able to use all LuckPerms commands by default.
  488. #
  489. # - Set to false to only allow users who have the permissions access to the commands
  490. commands-allow-op: true
  491.  
  492. # +----------------------------------------------------------------------------------------------+ #
  493. # | Vault integration settings                                                                   | #
  494. # +----------------------------------------------------------------------------------------------+ #
  495.  
  496. # If Vault lookups for offline players on the main server thread should be enabled.
  497. #
  498. # LuckPerms has a "catch" for plugins attempting to perform unsafe offline player data lookups
  499. # from the main server thread. This catch raises an exception (causes an error to occur) when unsafe
  500. # lookups are made, instead of allowing the lookup to happen, which would likely cause the server
  501. # to lag.
  502. #
  503. # However, if you're willing to accept the consequences, the catch can be disabled by setting this
  504. # option to 'true.
  505. vault-unsafe-lookups: true
  506.  
  507. # Controls which group LuckPerms should use for NPC players when handling Vault requests.
  508. #
  509. # - As NPCs aren't actually real players, LuckPerms does not load any user data for them. This
  510. #   becomes an issue when plugins want to check for their permissions using Vault.
  511. # - As a solution, Vault checks for NPCs fallback to a group, which is defined below.
  512. vault-npc-group: default
  513.  
  514. # Controls how LuckPerms should consider the OP status of NPC players when handing Vault requests.
  515. #
  516. # - If you want NPCs to have the same permissions as "normal" players, set this option to false.
  517. # - If you want NPCs to have OP status, set this option to true.
  518. vault-npc-op-status: false
  519.  
  520. # If the vault-server option below should be used.
  521. #
  522. # - When this option is set to false, the server value defined above under "server" is used.
  523. use-vault-server: false
  524.  
  525. # The name of the server used within Vault operations.
  526. #
  527. # - If you don't want Vault operations to be server specific, set this to "global".
  528. # - Will only take effect if use-vault-server is set to true above.
  529. vault-server: global
  530.  
  531. # If global permissions should be considered when retrieving meta or player groups
  532. vault-include-global: true
  533.  
  534. # If Vault operations should ignore any world arguments if supplied.
  535. vault-ignore-world: false
  536.  
  537. # If LuckPerms should print debugging info to console when a plugin uses a Vault function
  538. vault-debug: false
  539.  
  540. # +----------------------------------------------------------------------------------------------+ #
  541. # | Miscellaneous (and rarely used) settings                                                     | #
  542. # +----------------------------------------------------------------------------------------------+ #
  543.  
  544. # If LuckPerms should produce extra logging output when it handles logins.
  545. #
  546. # - Useful if you're having issues with UUID forwarding or data not being loaded.
  547. debug-logins: false
  548.  
  549. # If LuckPerms should use the "server-name" property from the "server.properties" file as the
  550. # "server" option within LuckPerms.
  551. use-server-properties-name: false
  552.  
  553. # If LuckPerms should allow usernames with non alphanumeric characters.
  554. #
  555. # - Note that due to the design of the storage implementation, usernames must still be 16 characters
  556. #   or less.
  557. allow-invalid-usernames: false
  558.  
  559. # If LuckPerms should allow a users primary group to be removed with the 'parent remove' command.
  560. #
  561. # - When this happens, the plugin will set their primary group back to default.
  562. prevent-primary-group-removal: false
  563.  
  564.  
  565.  
  566.  
  567. # +----------------------------------------------------------------------------------------------+ #
  568. # |                                                                                              | #
  569. # |                                      DEFAULT ASSIGNMENTS                                     | #
  570. # |                                                                                              | #
  571. # +----------------------------------------------------------------------------------------------+ #
  572.  
  573. # This section allows you to define defaults to give users whenever they connect to the server.
  574. # The default assignments are highly configurable and conditional.
  575. #
  576. # There is one default assignment built into LuckPerms, which will add all users to the "default"
  577. # group if they are not a member of any other group. This setting cannot be disabled. However, you
  578. # can use this section to add more of your own.
  579. #
  580. # IMPORTANT:
  581. # In order to save storage space, LuckPerms does not store users who have no permissions defined,
  582. # and are only a member of the default group. Adding default assignments to this section will negate
  583. # this effect. It is HIGHLY RECCOMENDED that instead of assigning defaults here, you add permissions
  584. # to the "default" group, or set the "default" group to inherit other groups, and then use the
  585. # group-name-rewrite rule above.
  586. #
  587. # It is also important to note that these rules are considered every time a player logs into the
  588. # server, and are applied directly to the user's data. Simply removing a rule here will not reverse
  589. # the effect of that rule on any users who have already had it applied to them.
  590. #
  591. # The "has" and "lacks" conditions below support standard boolean logic, using the 'and' & 'or'
  592. # characters used in Java.
  593. # e.g. "(some.other.permission | some.permission.other) & some.thing.else" == a user has
  594. # 'some.other.permission', or 'some.permission.other', and they also have 'some.thing.else'
  595. #
  596. # Groups are represented by the permission node: group.<group name>
  597. # Per server and per world nodes are represented by "server-world/permission" or "server/permission"
  598. #
  599. # Within conditions, permission nodes MUST be escaped using "<" and ">". See the example below.
  600. #
  601. # Explanation of the examples below: (they're just to demonstrate the features & use cases)
  602. #
  603. # rule1:
  604. # If a user is either in the vip or vip+ group, and they have the "titles.titlecollector" permission
  605. # set to true, and the "some.random.permission" set to false... if they're not in the group
  606. # "prison_titlepack" on the "prison" server, then give add them to the "prison_titlepack" group on
  607. # the "prison" server, and remove "some.random.permission".
  608. #
  609. # rule2:
  610. # If the user isn't in any of the following groups on the skyblock server: sb_level1, sb_level2,
  611. # sb_level3, then add them to sb_level1 on the skyblock server.
  612. #
  613. # rule3:
  614. # If the user is a member of the default group, remove them from default, add them to member, and
  615. # set their primary group to member.
  616. #
  617. # WARNING: Unlike internal commands, this system does not ensure that a group exists before adding
  618. # a user to it. It also does not unsure that a user is a member of a group before making that group
  619. # their primary group.
  620. #
  621. # Before you use "give: group.<name>" or "set-primary-group", make sure that the group exists, and
  622. # that the user is a member of the group.
  623. default-assignments:
  624.   rule1:
  625.     if:
  626.       has-true: <group.default>
  627.     take:
  628.       - group.default
  629.     give:
  630.       - group.member
  631.       - group.0
  632.       - group.a
  633.     set-primary-group: member
  634.   rule2:
  635.     if:
  636.       lacks: (<group.a> | <group.0>)
  637.     give:
  638.       - group.a
  639.       - group.0
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top