daily pastebin goal
44%
SHARE
TWEET

Untitled

a guest May 16th, 2018 68 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-20-lowlatency] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Crucial/Micron RealSSD m4/C400/P400
  6. Device Model:     M4-CT512M4SSD1
  7. Serial Number:    0000000012310911C3A4
  8. LU WWN Device Id: 5 00a075 10911c3a4
  9. Firmware Version: 070H
  10. User Capacity:    512,110,190,592 bytes [512 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Rotation Rate:    Solid State Device
  13. Form Factor:      2.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6
  16. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is:    Wed May 16 17:27:20 2018 BST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x80) Offline data collection activity
  26.                     was never started.
  27.                     Auto Offline Data Collection: Enabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                     without error or no self-test has ever
  30.                     been run.
  31. Total time to complete Offline
  32. data collection:        ( 2380) seconds.
  33. Offline data collection
  34. capabilities:            (0x7b) SMART execute Offline immediate.
  35.                     Auto Offline data collection on/off support.
  36.                     Suspend Offline collection upon new
  37.                     command.
  38.                     Offline surface scan supported.
  39.                     Self-test supported.
  40.                     Conveyance Self-test supported.
  41.                     Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                     power-saving mode.
  44.                     Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                     General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:    (   2) minutes.
  49. Extended self-test routine
  50. recommended polling time:    (  39) minutes.
  51. Conveyance self-test routine
  52. recommended polling time:    (   3) minutes.
  53. SCT capabilities:          (0x003d) SCT Status supported.
  54.                     SCT Error Recovery Control supported.
  55.                     SCT Feature Control supported.
  56.                     SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 16
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  61.   1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       0
  62.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  63.   9 Power_On_Hours          0x0032   100   100   001    Old_age   Always       -       9320
  64.  12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always       -       6896
  65. 170 Grown_Failing_Block_Ct  0x0033   100   100   010    Pre-fail  Always       -       0
  66. 171 Program_Fail_Count      0x0032   100   100   001    Old_age   Always       -       0
  67. 172 Erase_Fail_Count        0x0032   100   100   001    Old_age   Always       -       0
  68. 173 Wear_Leveling_Count     0x0033   097   097   010    Pre-fail  Always       -       92
  69. 174 Unexpect_Power_Loss_Ct  0x0032   100   100   001    Old_age   Always       -       75
  70. 181 Non4k_Aligned_Access    0x0022   100   100   001    Old_age   Always       -       510 0 510
  71. 183 SATA_Iface_Downshift    0x0032   100   100   001    Old_age   Always       -       0
  72. 184 End-to-End_Error        0x0033   100   100   050    Pre-fail  Always       -       0
  73. 187 Reported_Uncorrect      0x0032   100   100   001    Old_age   Always       -       0
  74. 188 Command_Timeout         0x0032   100   100   001    Old_age   Always       -       0
  75. 189 Factory_Bad_Block_Ct    0x000e   100   100   001    Old_age   Always       -       151
  76. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       0
  77. 195 Hardware_ECC_Recovered  0x003a   100   100   001    Old_age   Always       -       76
  78. 196 Reallocated_Event_Count 0x0032   100   100   001    Old_age   Always       -       0
  79. 197 Current_Pending_Sector  0x0032   100   100   001    Old_age   Always       -       0
  80. 198 Offline_Uncorrectable   0x0030   100   100   001    Old_age   Offline      -       0
  81. 199 UDMA_CRC_Error_Count    0x0032   100   100   001    Old_age   Always       -       0
  82. 202 Perc_Rated_Life_Used    0x0018   097   097   001    Old_age   Offline      -       3
  83. 206 Write_Error_Rate        0x000e   100   100   001    Old_age   Always       -       0
  84.  
  85. SMART Error Log Version: 1
  86. No Errors Logged
  87.  
  88. SMART Self-test log structure revision number 1
  89. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  90. # 1  Vendor (0xff)       Completed without error       00%      8695         -
  91. # 2  Vendor (0xff)       Completed without error       00%      7464         -
  92. # 3  Vendor (0xff)       Completed without error       00%      6905         -
  93. # 4  Vendor (0xff)       Completed without error       00%      6737         -
  94. # 5  Vendor (0xff)       Completed without error       00%      6395         -
  95. # 6  Vendor (0xff)       Completed without error       00%      5361         -
  96. # 7  Vendor (0xff)       Completed without error       00%      5255         -
  97. # 8  Vendor (0xff)       Completed without error       00%      4986         -
  98. # 9  Vendor (0xff)       Completed without error       00%      4875         -
  99. #10  Vendor (0xff)       Completed without error       00%      4812         -
  100. #11  Vendor (0xff)       Completed without error       00%      4750         -
  101.  
  102. SMART Selective self-test log data structure revision number 1
  103.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  104.     1        0        0  Not_testing
  105.     2        0        0  Not_testing
  106.     3        0        0  Not_testing
  107.     4        0        0  Not_testing
  108.     5        0        0  Not_testing
  109. Selective self-test flags (0x0):
  110.   After scanning selected spans, do NOT read-scan remainder of disk.
  111. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top