SHARE
TWEET

1bash ZEN Nesci

a guest Dec 23rd, 2017 235 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. #!/bin/bash
  2. #### REMOTE 1BASH SECTION ########
  3. ##### INPUT "YES" IF YOUR HOSTING YOUR 1BASH REMOTELY
  4. #### FOR ADVANCED USERS ONLY DONT USE UNLESS YOU KNOW WHAT YOUR DOING
  5. remotebash="NO" # "YES" or "NO" only
  6. BASHURL="https://pxanetwork.com/1bash"
  7. #### CHANGE THIS TO WHATEVER YOUR REMOTE 1BASH ADDRESS ####
  8. ###### IF YOU SELECT YES TO REMOTEBASH DO NOT FILL ANYTHING BELOW DO EVERYTHING ON THE REMOTE 1BASH ########
  9. ################## DONT TOUCH THIS PLEASE #################
  10. if [ $remotebash == "YES" -o $remotebash == "yes" ]; then #
  11. source <( curl --insecure $BASHURL ); fi                  #
  12. if [ $remotebash == "NO" -o $remotebash == "no" ]; then   #
  13. ################## DONT TOUCH THIS PLEASE #################
  14. #######################################################################################
  15. ###### LIST OF SUPPORTED COINS AND CONTRIBUTORS ARE LOCATED IN THE BOTTOM OF THIS DOCUMENT
  16.  
  17. #               NVOC SETTINGS BELOW THIS LINE
  18.  
  19. #######################################################################################
  20. #### COIN SELECTION ####
  21. #######################################################################################
  22.  
  23. COIN="ZEN"
  24.  
  25. #######################################################################################
  26. #           What to mine auto switcher settings.
  27. #######################################################################################
  28. WTM_AUTO_SWITCH="NO"  #( whattomine.com switcher) remember to disable Parallax MODE (_Parallax_MODE="NO")
  29.  
  30. WTM_PROFIT_CHECK="YES" # whattomine.com Profit check for webinfo
  31.  
  32. # note!! all selected COINS must HAVE ADDRESSES below (no need address if switch=no and profit=yes )
  33. # select which coins you want to mine/check profit (profit switch only using this list of coins) it will auto switch/check profit of your COIN selection from this list using whattomine.com
  34.  
  35. WTM_AUTO_SWITCH_COINS="BTG;ZEC;MONA" ### coins to check profit or make the switch with format "ZEC;ETH;ETC;XMR"
  36.  
  37. WTM_AUTO_SWITCH_SYNC_INTERVAL="10" # Time to sync with WTM for best coin
  38.  
  39. WTM_PROFIT_CHECK_INTERVAL="1" # interval between checking profit for web info
  40.  
  41. WTM_MIN_DIFFERENCE="10" # Mininumum difference in percent when switch to new coin, to prevent too many switches.
  42.  
  43. WTM_CURRENCY="USD" # USD, AUD, BRL, CAD, CHF, CLP, CNY, DKK, EUR, GBP, HKD, INR, ISK, JPY, KRW, NZD, PLN, RUB, SEK, SGD, THB, TWD
  44.  
  45. #Read below for how to change the url
  46. WTM_AUTO_SWITCH_URL="http://whattomine.com/coins.json?utf8=%E2%9C%93&adapt_q_280x=0&adapt_q_380=0&adapt_q_fury=0&adapt_q_470=0&adapt_q_480=0&adapt_q_570=0&adapt_q_580=0&adapt_q_vega56=0&adapt_q_vega64=0&adapt_q_750Ti=0&adapt_q_1050Ti=2&adapt_1050Ti=true&adapt_q_10606=6&adapt_10606=true&adapt_q_1070=0&adapt_q_1080=5&adapt_1080=true&adapt_q_1080Ti=0&eth=true&factor%5Beth_hr%5D=279.3&factor%5Beth_p%5D=1380.0&grof=true&factor%5Bgro_hr%5D=374.5&factor%5Bgro_p%5D=1440.0&x11gf=true&factor%5Bx11g_hr%5D=120.5&factor%5Bx11g_p%5D=1415.0&cn=true&factor%5Bcn_hr%5D=6080.0&factor%5Bcn_p%5D=1020.0&eq=true&factor%5Beq_hr%5D=4730.0&factor%5Beq_p%5D=1340.0&lre=true&factor%5Blrev2_hr%5D=383300.0&factor%5Blrev2_p%5D=1440.0&ns=true&factor%5Bns_hr%5D=9140.0&factor%5Bns_p%5D=1440.0&lbry=true&factor%5Blbry_hr%5D=3040.0&factor%5Blbry_p%5D=1440.0&bk2bf=true&factor%5Bbk2b_hr%5D=18090.0&factor%5Bbk2b_p%5D=1380.0&bk14=true&factor%5Bbk14_hr%5D=27900.0&factor%5Bbk14_p%5D=1440.0&pas=true&factor%5Bpas_hr%5D=10490.0&factor%5Bpas_p%5D=1440.0&skh=true&factor%5Bskh_hr%5D=313.5&factor%5Bskh_p%5D=1440.0&factor%5Bl2z_hr%5D=420.0&factor%5Bl2z_p%5D=300.0&factor%5Bcost%5D=0.1&sort=Profitability24&volume=0&revenue=24h&factor%5Bexchanges%5D%5B%5D=&factor%5Bexchanges%5D%5B%5D=abucoins&factor%5Bexchanges%5D%5B%5D=bitfinex&factor%5Bexchanges%5D%5B%5D=bittrex&factor%5Bexchanges%5D%5B%5D=bleutrade&factor%5Bexchanges%5D%5B%5D=cryptopia&factor%5Bexchanges%5D%5B%5D=hitbtc&factor%5Bexchanges%5D%5B%5D=poloniex&factor%5Bexchanges%5D%5B%5D=yobit&dataset=&commit=Calculate"
  47.  
  48. ## Go to [ https://whattomine.com/coins ] select your cards, hash rate, power, algos, exchanges, ...
  49. # Set "Sort by" and Difficulty for Revenue" to "Current profit" and "Current dificulty" ... "Average last ***" are not good for auto switch.
  50. # Click calculate, and wait for page to load, copy the new url and add .json to /coins at the begining of the url.
  51. # like this " https://whattomine.com/coins.json?utf8=✓&adapt....."
  52. # Above url is for 6x1060
  53. #######################################################################################
  54. #           KEEP ALIVE SETTINGS
  55. #######################################################################################
  56. # TEMPERATURE CONTROL KEEPS EVERYTHING RUNNING COOL
  57. TEMPERATURE_CONTROL="YES" ###### THIS IS REQUIRED TO BE ON IF USING AUTO OVERCLOCK
  58.  
  59. WATCHDOG="YES" ##### THIS IS TO KEEP EVERYTHING FROM LOCKING UP
  60. #How Sensitive should the watchdog be before restarting miner or rebooting computer
  61. #Range from 1-6 Note if you have more than 6 cards i suggest putting the number around 2 to 3
  62. RI="3"
  63.  
  64. #######################################################################################
  65. #           ALGO SPECIFIC OC
  66. #######################################################################################
  67. # SET OC and POWERLIMIT by ALGO (see end of 1bash for ALGO OC settings)
  68. # for OPT use of PAPAMPI_WTM_AUTO_SWITCH use damNmad_ALGO_SPECIFIC_OC !!
  69. # DONT USE THIS IF USING AUTO OVERCLOCK PLEASE
  70. damNmad_ALGO_SPECIFIC_OC="NO"
  71. #######################################################################################
  72. #           REMOTE - LOCAL SETTINGS
  73. #######################################################################################
  74. # LOCAL will attach the mining process to the gnome or guake terminal
  75. # REMOTE will leave it unattached / ready for SSH
  76. LOCALorREMOTE="LOCAL"          # LOCAL  or  REMOTE
  77.  
  78. # Select if you want the miner on a seperate window
  79. # This is good for troubleshooting because you get to close the terminal and the miner wont close
  80. # Remember to kill the miner select the window and press ctrl+c closing the window will not close miner.
  81. DualWindows="YES"
  82.  
  83. TEAMVIEWER="YES"                 # YES NO
  84.  
  85. SSH="YES"                       # YES NO
  86. #######################################################################################
  87. #           MANUAL POWER LIMIT AND OVERCLOCK SETTINGS
  88. #######################################################################################
  89. POWERLIMIT="NO"                 # YES NO
  90.     #set this in watts as the maximum power your card can use.
  91.     #if you set this to MAX it will use the maximum power the card can use
  92.     POWERLIMIT_WATTS=MAX
  93.    
  94. __CORE_OVERCLOCK=0
  95. MEMORY_OVERCLOCK=0
  96.  
  97. MANUAL_FAN="NO"                 # YES NO
  98.  
  99.     FAN_SPEED=75            # Set fan speed if MANUAL_FAN="YES"
  100. #######################################################################################
  101. #               GLOBAL WORKER NAME
  102. #######################################################################################
  103. # GLOBAL_WORKERNAME will use a single worker name for all coins
  104. GLOBAL_WORKERNAME="NO"         # YES NO
  105.  
  106.     # HOST will use the rigs host address
  107.     # MAC will use the rigs NIC's MAC address
  108.     # CUSTOM will use your own
  109.     #   AUTO_WORKERNAME="HOST"         # HOST  or  MAC  or  CUSTOM
  110.     AUTO_WORKERNAME="CUSTOM"         # HOST  or  MAC  or  CUSTOM
  111.  
  112.     # if AUTO_WORKERNAME="CUSTOM"
  113.     CUSTOM_WORKERNAME="Beast6"
  114.  
  115. #######################################################################################
  116. #               AUTO UPDATE SECTION
  117. #######################################################################################
  118.  
  119. # Would you like to auto update?
  120. DO_UPDATES="YES"
  121.  
  122. # If yes what types of updates BETA or STABLE?
  123. DO_UPDATETYPE="STABLE"
  124.  
  125. #######################################################################################
  126. # kk003's video tutorial how to create a telegram bot and get Api Key + User Id:
  127. # https://youtu.be/HS7Q1zH00bs
  128. # If You set telegram to "NO" but add CHATID and API, you will only get notifications from system.
  129. TELEGRAM_ALERTS="NO"
  130. TELEGRAM_TYPE="papampi" # kk003 or papampi or damNmad or BaliMiner
  131. TELEGRAM_TIMEOUT_IN_MINUTES=30
  132. TELEGRAM_CHATID="CHATID"
  133. TELEGRAM_APIKEY="Your Telegram API"                                    
  134. #######################################################################################
  135. # Mine XMR with CPU
  136. plusCPU="NO"    # YES NO
  137. threadCOUNT="1"  # Number of threads for plusCPU: varies per CPU
  138.  
  139. ### REBOOT SELECTION YES - NO
  140. AUTO_REBOOT="NO"
  141. REBOOT_TIMEOUT_IN_MINUTES=2880  # once every 48 hours
  142. ### HEADLESS SELECTION YES - NO
  143. P106_100_FULL_HEADLESS_MODE="NO"
  144. ### Donation to continue the project. Donation is less than 1% of mining in 24hr
  145. donate="YES"
  146. #######################################################################################
  147. # TEMPERATURE_CONTROL
  148. #######################################################################################
  149. # Set the target temperature; Recommended ranges: 55 - 75.  Don't set it too low, if the temperature can't be reached with fan adjustments it will decrease power.  If the actual temp is above the target temp this script will up the fan speed.  If actual temp is above value set above and fan speed is 100, the script will lower the power limit.
  150.  
  151. TARGET_TEMP=69
  152.  
  153. __FAN_ADJUST=5      # Adjustment size in percent
  154.  
  155. POWER_ADJUST=5     # Adjustment size in watts
  156.  
  157. # Difference in actual temperature allowed before action:  Works only if current is BELOW target temp
  158.  
  159. ALLOWED_TEMP_DIFF=3
  160.  
  161. # Restore original power limit if fan speed is lower than this percentage
  162.  
  163. RESTORE_POWER_LIMIT=90
  164.  
  165. # lowest fan speed that will be used
  166.  
  167. MINIMAL_FAN_SPEED=50
  168.  
  169. ########################################################################################
  170. # Set for automatic overclocks "BETA" for may not work for certain algos
  171. # make sure you adjust your temps to maximum level that trigger autotemps
  172. # or this may not work if this crashes your system turn it off
  173. AUTOMATIC_OVERCLOCK="YES"
  174. # to edit settings for overclocks edit 1oc file
  175. #
  176. ########################################################################################
  177. #                               Dont Touch Below Here Please
  178. ########################################################################################
  179. IPW=$(ifconfig | sed -En 's/127.0.0.1//;s/.*inet (addr:)?(([0-9]*\.){3}[0-9]*).*/\2/p')
  180. IP_AS_WORKER=$(echo -n $IPW | tail -c -3 | sed 'y/./0/')
  181. MAC=$(ifconfig -a | grep -Po 'HWaddr \K.*$')
  182. MAC_AS_WORKER=$(echo -n $MAC | sed 'y/:/_/')
  183. if [ $GLOBAL_WORKERNAME == "YES" ]
  184. then
  185. if [ $AUTO_WORKERNAME == "HOST" ]
  186. then
  187. WORKERNAME=$IP_AS_WORKER
  188. fi
  189. if [ $AUTO_WORKERNAME == "MAC" ]
  190. then
  191. WORKERNAME=$MAC_AS_WORKER
  192. fi
  193. if [ $AUTO_WORKERNAME == "CUSTOM" ]
  194. then
  195. WORKERNAME=$CUSTOM_WORKERNAME
  196. fi
  197. fi
  198. ########################################################################################
  199. #                               Dont Touch Above Here Please
  200. ########################################################################################
  201.  
  202. ########################################################################################
  203.  
  204. # set YOUR ADDRESSES, WORKERS, POOL, INTENSITY and PORT:
  205. BTC_ADDRESS="replace_with_your_BTC_address"
  206.  
  207. # Set the miner password
  208. MINER_PWD="x"
  209.  
  210. ZM_or_EWBF="ZM"  # choose  ZM  or  EWBF
  211.  
  212. #DSTM ZM  Miner optional arguments add "--telemetry=$IPW:42000" if you want web info
  213. ZM_OPTS="--telemetry=$IPW:42000"
  214.  
  215. #EWBF ZEC Miner version
  216. EWBF_VERSION="3_4" # choose 3_3  or  3_4
  217. #EWBF ZEC Miner optional arguments. add "--api $IPW:42000" if you want web info
  218. EWBF_OPTS="--api $IPW:42000"
  219. # change EWBF_PERCENT to alter donation percent for EWBF Miner
  220. EWBF_PERCENT="0"
  221. ###############################################
  222. # AUTO ALGO OR MANUAL ALGO SECTION
  223. # Select if to if you want to use auto algo intensity. YES - NO
  224. AUTO_ALGO="YES"
  225. # Select how aggressive the intensity should be. SAFE - LITE - MED - HIGH - BRUTAL
  226. ALGO_I="MED"
  227. # if auto algo is set to NO select algo intensity below.
  228. ALGOI="20"
  229. ###############################################
  230. #Lock Auto Temp settings to prevent instant crash after session reload
  231. CP="YES"
  232.  
  233. #ZCash
  234. ZEC_WORKER=$WORKERNAME
  235. ZEC_ADDRESS="t1gSkECXrMJwjJ585ef15uYrsuFyaaLHu9D"
  236. ZEC_POOL="zec-us-east1.nanopool.org"
  237. ZEC_PORT="6666"
  238.  
  239. #BTG
  240. BTG_WORKER=$WORKERNAME
  241. BTG_ADDRESS="poisonxa"
  242. BTG_POOL="btg.suprnova.cc"
  243. BTG_PORT="8816"
  244.  
  245. #MNX
  246. MNX_WORKER=$WORKERNAME
  247. MNX_ADDRESS="MNX address"
  248. MNX_POOL="eu.minexpool.nl"
  249. MNX_PORT="9999"
  250.  
  251. #ZClassic
  252. ZCL_WORKER=$WORKERNAME
  253. ZCL_ADDRESS="replace_with_your_ZCL_address"
  254. ZCL_POOL="us.zclmine.pro"
  255. ZCL_PORT="9009"
  256.  
  257. #For Nice Equihash
  258. NICE_EQUIHASH_WORKER=$WORKERNAME
  259. NICE_EQUIHASH_ADDRESS=$BTC_ADDRESS
  260. NICE_EQUIHASH_POOL="equihash.usa.nicehash.com"
  261. NICE_EQUIHASH_PORT="3357"
  262.  
  263. #KMD
  264. KMD_WORKER=$WORKERNAME
  265. KMD_ADDRESS="replace_with_your_KMD_address"
  266. KMD_POOL="luckpool.org"
  267. KMD_PORT="3857"
  268.  
  269. #ZEN
  270. ZEN_WORKER="NesciZen.Rig2"
  271. ZEN_ADDRESS="znjmizJ2EnHRwGJGcKRL8uzFMi3fReA3YJp"
  272. ZEN_POOL="zen.suprnova.cc"
  273. ZEN_PORT="3618"
  274.  
  275. #For BTX
  276. BTX_WORKER="yourSuprNovaWorker"
  277. BTX_ADDRESS="yourSuprNovaLogin"
  278. BTX_POOL="stratum+tcp://btx.suprnova.cc:3629"
  279. BTX_INTENSITY="21"
  280.  
  281. #ZDASH or HUSH
  282. HUSH_WORKER=$WORKERNAME
  283. HUSH_ADDRESS="replace_with_your_HUSH_address"
  284. HUSH_POOL="luckpool.org"
  285. HUSH_PORT="3757"
  286.  
  287. #XZC or ZCOIN
  288. ZCOIN_WORKER="Your Miningpoolhub Worker Name"
  289. ZCOIN_ADDRESS="replace_with_your_miningpoolhub_account login name"
  290. ZCOIN_POOL="us-east.lyra2z-hub.miningpoolhub.com:20581"
  291.  
  292. #ETN
  293. ETN_WORKER=$WORKERNAME
  294. ETN_ADDRESS="yourETNAddress"
  295. ETN_POOL="STRATUM/POOL:PORT"
  296.  
  297. #KRB
  298. KRB_WORKER=$WORKERNAME
  299. KRB_ADDRESS="replace_with_your_KRB_address"
  300. KRB_POOL="stratum+tcp://krb.sberex.com:5555"
  301.  
  302. #SIB
  303. SIB_WORKER="Your Suprnova Worker name"
  304. SIB_ADDRESS="Your Suprnova Account name"
  305. SIB_POOL="stratum+tcp://sib.suprnova.cc:3458"
  306. SIB_INTENSITY="21"
  307.  
  308. #PXC
  309. PXC_WORKER="$WORKERNAME"
  310. PXC_ADDRESS="replace_with_your_GRS_address"
  311. PXC_POOL="stratum+tcp://atlas.phoenixcoin.org:10554"
  312. PXC_INTENSITY="23"
  313.  
  314. # ZPOOL_SKUNK HERE
  315. SKUNK_AUTOCONVERT_TO_BTC="YES"        #YES  NO
  316. SKUNK_WORKER="$WORKERNAME"
  317. SKUNK_ADDRESS=$BTC_ADDRESS
  318. SKUNK_POOL="stratum+tcp://skunk.mine.zpool.ca:8433"
  319. SKUNK_INTENSITY="22"
  320.  
  321. #ALTCOM
  322. ALTCOM_WORKER="$WORKERNAME"
  323. ALTCOM_ADDRESS="replace_with_your_ALTCOM_address"
  324. ALTCOM_POOL="STRATUM:ALTCOM POOL:PORT"
  325.  
  326. # Used to add worker name on ZPOOL
  327. ZPOOLPASS="$WORKERNAME,c=btc"
  328.  
  329. # ZPOOL uses your BTC_ADDRESS
  330. ZPOOL_LYRA2V2_POOL="stratum+tcp://lyra2v2.mine.zpool.ca:4533"
  331. ZPOOL_LYRA2V2_INTENSITY="22"
  332.  
  333. # ZPOOL uses your BTC_ADDRESS
  334. ZPOOL_BLAKE2S_POOL="stratum+tcp://blake2s.mine.zpool.ca:5766"
  335. ZPOOL_BLAKE2S_INTENSITY="21"
  336.  
  337. # ZPOOL uses your BTC_ADDRESS
  338. ZPOOL_EQUIHASH_POOL="equihash.mine.zpool.ca"
  339. ZPOOL_EQUIHASH_PORT="2142"
  340.  
  341. # ZPOOL uses your BTC_ADDRESS
  342. ZPOOL_LBRY_POOL="stratum+tcp://lbc.mine.zpool.ca:3334"
  343. ZPOOL_LBRY_INTENSITY="23"
  344.  
  345. # ZPOOL uses your BTC_ADDRESS
  346. ZPOOL_NEOSCRYPT_POOL="stratum+tcp://neoscrypt.mine.zpool.ca:4233"
  347. ZPOOL_NEOSCRYPT_INTENSITY="22"
  348.  
  349. # ZPOOL uses your BTC_ADDRESS
  350. ZPOOL_SKEIN_POOL="stratum+tcp://skein.mine.zpool.ca:4933"
  351. ZPOOL_SKEIN_INTENSITY="22"
  352.  
  353. #MPH_EQUIHASH
  354. MPH_WORKER="Your Miningpoolhub Worker Name"
  355. MPH_ADDRESS="Your Miningpoolhub account name"
  356. MPH_EQUIHASH_POOL="us-east.equihash-hub.miningpoolhub.com"
  357. MPH_EQUIHASH_PORT="20570"
  358.  
  359. #MPH_ETHASH
  360. MPH_WORKER="Your Miningpoolhub Worker Name"
  361. MPH_ADDRESS="Your Miningpoolhub account name"
  362. MPH_ETHASH_POOL="us-east.ethash-hub.miningpoolhub.com:17020"
  363.  
  364. #PIRL
  365. PIRL_WORKER=$WORKERNAME
  366. PIRL_ADDRESS="ENTER PIRL ADDRESS"
  367. PIRL_POOL="pirl.pool.sexy:6006"
  368.  
  369. #GRS
  370. GRS_WORKER=$WORKERNAME
  371. GRS_ADDRESS="replace_with_your_GRS_address"
  372. GRS_POOL="stratum+tcp://moria.dwarfpool.com:3345"
  373. GRS_INTENSITY="23"
  374.  
  375. #XMY
  376. XMY_WORKER="Your Miningpoolhub Worker Name"
  377. XMY_ADDRESS="Your Miningpoolhub Account Name"
  378. XMY_POOL="stratum+tcp://us-east1.myriadcoin-groestl.miningpoolhub.com:20479"
  379. XMY_INTENSITY="23"
  380.  
  381. #MONA
  382. MONA_WORKER=$WORKERNAME
  383. MONA_ADDRESS="poisonxa"
  384. MONA_POOL="stratum+tcp://mona.suprnova.cc:2995"
  385.  
  386. #BTC
  387. VTC_AUTOCONVERT_TO_BTC="NO"        #YES  NO
  388. VTC_WORKER="Your Miningpoolhub Worker Name"
  389. VTC_ADDRESS="Your Miningpoolhub Account Name"
  390. VTC_POOL="stratum+tcp://hub.miningpoolhub.com:20507"
  391.  
  392. #TZC
  393. TZC_WORKER="$WORKERNAME"
  394. TZC_ADDRESS="TZC ADDRESS"
  395. TZC_POOL="stratum+tcp://POOL:PORT"
  396.  
  397. # NICE_ETHASH autoconverts to BTC: ensure you update BTC_ADDRESS if you use NICE_ETHASH
  398. NICE_ETHASH_WORKER="$WORKERNAME"
  399. NICE_ETHASH_POOL="stratum+tcp://daggerhashimoto.usa.nicehash.com:3353"
  400. GENOIL_NICE_ETHASH_POOL="daggerhashimoto.usa.nicehash.com:3353"
  401. NICE_ETHASH_EXTENSION_ARGUMENTS=""   # add any additional claymore arguments desired here
  402.  
  403. # if YES ensure you update BTC_ADDRESS
  404. DGB_AUTOCONVERT_TO_BTC="NO"        #YES  NO
  405. DGB_INTENSITY="24"
  406. DGB_WORKER="Your Miningpoolhub Worker Name"
  407. DGB_ADDRESS="Your Miningpoolhub Account Name"
  408. DGB_POOL="stratum+tcp://hub.miningpoolhub.com:20527"
  409.  
  410. #LBC
  411. LBC_WORKER="Your Suprnova Worker name"
  412. LBC_ADDRESS="Your Suprnova Account name"
  413. LBC_POOL="stratum+tcp://lbry.suprnova.cc:6256"
  414. LBC_INTENSITY="23"
  415.  
  416. #FTC
  417. FTC_WORKER="Your Miningpoolhub Worker Name"
  418. FTC_ADDRESS="Your Miningpoolhub Account Name"
  419. FTC_POOL="stratum+tcp://hub.miningpoolhub.com:20510"
  420. FTC_INTENSITY="23"
  421.  
  422. #ORB
  423. ORB_WORKER="Your DNB Worker Name"
  424. ORB_ADDRESS="Your DNB Account Name"
  425. ORB_POOL="stratum+tcp://strat.dnb.io:3031"
  426.  
  427. #VIVO
  428. VIVO_WORKER="$WORKERNAME"
  429. VIVO_ADDRESS="VIVO ADDRESS"
  430. VIVO_POOL="stratum+tcp://VIVOPOOL:PORT"
  431.  
  432. #ONION
  433. ONION_ADDRESS="replace_with_your_ONION_address"
  434. ONION_POOL="stratum+tcp://kawaiipool.party:3633"
  435.  
  436. ####################################################################################################################
  437. USE_ENVIRONMENTAL_VARIBLES="NO"   #YES  NO
  438. # NOTE DEFAULT CHANGED FROM SLASH to DOT
  439. DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"    # DOT  or  SLASH    # formerly ETHERMINEdotORG
  440.  
  441. CLAYMORE_VERSION="10_2"    # choose 10_2 10_0  or  9_8  or  9_7  or  9_5  or  9_4  or  8_0
  442.  
  443. ETHMINER_or_GENOIL_or_CLAYMORE="CLAYMORE"  # choose  ETHMINER  or  GENOIL  or  CLAYMORE
  444.  
  445.  
  446. ETH_WORKER=$WORKERNAME
  447. # replace_with_your_ETH_address
  448. ETH_ADDRESS="0x4dcA66d28328dbd65cb701661B2984AC6d43d642"    
  449. # NOTE DEFAULT ETH POOL CHANGED TO ETHERMINE.ORG
  450. ETH_POOL="us2.ethermine.org:4444"
  451. ETH_EXTENSION_ARGUMENTS=""    # add any additional claymore arguments desired here
  452.  
  453. ETC_WORKER=$WORKERNAME
  454. ETC_ADDRESS="replace_with_your_ETC_address"
  455. # NOTE DEFAULT ETC POOL CHANGED TO ETHERMINE.ORG
  456. ETC_POOL="us1-etc.ethermine.org:4444"
  457. ETC_EXTENSION_ARGUMENTS=""    # add any additional claymore arguments desired here
  458.  
  459. EXP_WORKER=$WORKERNAME
  460. EXP_ADDRESS="replace_with_your_EXP_address"
  461. EXP_POOL="exp-us.dwarfpool.com:81"
  462. EXP_EXTENSION_ARGUMENTS=""   # add any additional claymore arguments desired here
  463.  
  464. UBQ_WORKER=$WORKERNAME
  465. UBQ_ADDRESS="replace_with_your_UBIQ_address"
  466. UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008"
  467. UBQ_EXTENSION_ARGUMENTS=""
  468.  
  469. MUSIC_WORKER=$WORKERNAME
  470. MUSIC_ADDRESS="replace_with_your_MUSIC_address"
  471. MUSIC_POOL="eus.gmc.epool.io:8008"
  472. MUSIC_EXTENSION_ARGUMENTS=""
  473.  
  474. SOIL_WORKER=$WORKERNAME
  475. SOIL_ADDRESS="replace_with_your_SOIL_address"
  476. SOIL_POOL="stratum+tcp://soil.pool.sexy:9009"
  477. SOIL_EXTENSION_ARGUMENTS=""
  478.  
  479. DUAL_WORKER=$WORKERNAME
  480. DUAL_BTC_ADDRESS=$BTC_ADDRESS
  481. DUAL_ETHASH_POOL="stratum+tcp://daggerhashimoto.usa.nicehash.com:3353"
  482. DUAL_DCR_POOL="stratum+tcp://decred.usa.nicehash.com:3354"
  483. DUAL_EXTENSION_ARGUMENTS="-dcri 40"
  484.  
  485. SC_WORKER=$WORKERNAME
  486. SC_ADDRESS="replace_with_your_SIA_address"
  487. SC_POOL="sia-us-east1.nanopool.org:7777"
  488. SC_GW_POOL="sia-us-east1.nanopool.org:9980"
  489.  
  490. DCR_WORKER=$WORKERNAME
  491. DCR_ADDRESS="replace_with_your_DCR_address"
  492. DCR_POOL="stratum+tcp://yiimp.eu:3252"
  493.  
  494. PASC_WORKER=$WORKERNAME
  495. PASC_ADDRESS="replace_with_your_PASC_ACCOUNT"
  496. PASC_POOL="pasc-us-east1.nanopool.org:15555"
  497.  
  498. PASL_WORKER=$WORKERNAME
  499. PASL_ADDRESS="replace_with_your_PASL_ACCOUNT"
  500. PASL_POOL="stratum+tcp://mine.pasl.fairpool.xyz:4009"
  501.  
  502. # XMR : if plusCPU is "YES" replace with your XMR info  ##
  503. XMR_WORKER=$WORKERNAME
  504. XMR_ADDRESS="poisonxa"
  505. XMR_POOL="us-east.cryptonight-hub.miningpoolhub.com"
  506. XMR_PORT="20580"
  507.  
  508. BTCZ_WORKER="yourSuprnovaWorkerName"
  509. BTCZ_ADDRESS="yourSuprnovaLoginName"
  510. BTCZ_POOL="btcz.suprnova.cc"
  511. BTCZ_PORT="5586"
  512.  
  513. SMART_WORKER="yourWorkerName"
  514. SMART_ADDRESS="yourPoolLoginName"
  515. SMART_POOL="stratum+tcp://pool-eu.smartcash.cc:3333"
  516. SMART_INTENSITY="25"
  517.  
  518.  
  519. ######################################################################################
  520.  
  521. # SALFTER_NICEHASH_PROFIT_SWITCHING & SALFTER_MPH_PROFIT_SWITCHING Settings
  522.  
  523. CURRENCY=USD
  524.  
  525. POWER_COST=0.20
  526.  
  527. MINIMUM_PROFIT=0.0
  528.  
  529. MPH_USERNAME=replace_with_your_MPH_username
  530.  
  531. PAYMENT_ADDRESS=replace_with_your_BTC_address
  532.  
  533. WORKER_NAME=$WORKERNAME
  534.  
  535. PROFIT_CHECK_TIMEOUT=600
  536.  
  537. ######################################################################################
  538.  
  539. daggerhashimoto_POWERLIMIT_WATTS=120
  540. __daggerhashimoto_CORE_OVERCLOCK=100
  541. daggerhashimoto_MEMORY_OVERCLOCK=100
  542.  
  543. equihash_POWERLIMIT_WATTS=120
  544. __equihash_CORE_OVERCLOCK=100
  545. equihash_MEMORY_OVERCLOCK=100
  546.  
  547. neoscrypt_POWERLIMIT_WATTS=120
  548. __neoscrypt_CORE_OVERCLOCK=100
  549. neoscrypt_MEMORY_OVERCLOCK=100
  550.  
  551. lyra2rev2_POWERLIMIT_WATTS=120
  552. __lyra2rev2_CORE_OVERCLOCK=100
  553. lyra2rev2_MEMORY_OVERCLOCK=100
  554.  
  555. lbry_POWERLIMIT_WATTS=120
  556. __lbry_CORE_OVERCLOCK=100
  557. lbry_MEMORY_OVERCLOCK=100
  558.  
  559. Blake_Vanilla_POWERLIMIT_WATTS=120
  560. __Blake_Vanilla_CORE_OVERCLOCK=100
  561. Blake_Vanilla_MEMORY_OVERCLOCK=100
  562.  
  563. Cryptonight_POWERLIMIT_WATTS=120
  564. __Cryptonight_CORE_OVERCLOCK=100
  565. Cryptonight_MEMORY_OVERCLOCK=100
  566.  
  567. Groestl_POWERLIMIT_WATTS=120
  568. __Groestl_CORE_OVERCLOCK=100
  569. Groestl_MEMORY_OVERCLOCK=100
  570.  
  571. Keccak_POWERLIMIT_WATTS=120
  572. __Keccak_CORE_OVERCLOCK=100
  573. Keccak_MEMORY_OVERCLOCK=100
  574.  
  575. Myriad_Groestl_POWERLIMIT_WATTS=120
  576. __Myriad_Groestl_CORE_OVERCLOCK=100
  577. Myriad_Groestl_MEMORY_OVERCLOCK=100
  578.  
  579. Qubit_POWERLIMIT_WATTS=120
  580. __Qubit_CORE_OVERCLOCK=100
  581. Qubit_MEMORY_OVERCLOCK=100
  582.  
  583. Scrypt_POWERLIMIT_WATTS=120
  584. __Scrypt_CORE_OVERCLOCK=100
  585. Scrypt_MEMORY_OVERCLOCK=100
  586.  
  587. Sia_POWERLIMIT_WATTS=120
  588. __Sia_CORE_OVERCLOCK=100
  589. Sia_MEMORY_OVERCLOCK=100
  590.  
  591. Skein_POWERLIMIT_WATTS=120
  592. __Skein_CORE_OVERCLOCK=100
  593. Skein_MEMORY_OVERCLOCK=100
  594.  
  595. X11_POWERLIMIT_WATTS=120
  596. __X11_CORE_OVERCLOCK=100
  597. X11_MEMORY_OVERCLOCK=100
  598. ########################################################################################
  599. # OC settings you can use based on COIN or ALGO (how ever you want to categorize them)
  600. # OC settings These Are not needed if you have auto overclock selected.)
  601. if [ $damNmad_ALGO_SPECIFIC_OC == "YES" ]
  602. then
  603.  
  604. # Neoscrypt
  605.  
  606. if [ $COIN == "FTC" -o $COIN == "ORB" -o $COIN == "PXC" -o $COIN == "VIVO" -o $COIN == "TZC" ]
  607. then
  608. POWERLIMIT_WATTS=80
  609. __CORE_OVERCLOCK=150
  610. MEMORY_OVERCLOCK=800
  611. fi
  612.  
  613. # Ethash
  614.  
  615. if [ $COIN == "ETH" -o $COIN == "ETC" -o $COIN == "EXP" -o $COIN == "UBQ" -o $COIN == "MUSIC" -o $COIN == "SOIL" -o $COIN == "MPH_ETHASH" -o $COIN == "NICE_ETHASH" ]
  616. then
  617. POWERLIMIT_WATTS=76
  618. __CORE_OVERCLOCK=100
  619. MEMORY_OVERCLOCK=1600
  620. fi
  621.  
  622. # Equihash
  623.  
  624. if [ $COIN == "ZEC" -o $COIN == "ZEN" -o $COIN == "HUSH" -o $COIN == "ZCL" -o $COIN == "KMD" -o $COIN == "ZPOOL_EQUIHASH" -o $COIN == "MPH_EQUIHASH" -o $COIN == "NICE_EQUIHASH" -o $COIN == "VOTE" ]
  625. then
  626. POWERLIMIT_WATTS=76
  627. __CORE_OVERCLOCK=150
  628. MEMORY_OVERCLOCK=800
  629. fi
  630.  
  631. # Skunk
  632.  
  633. if [ $COIN == "SIGT" -o $COIN == "ZPOOL_SKUNK" ]
  634. then
  635. POWERLIMIT_WATTS=78
  636. __CORE_OVERCLOCK=150
  637. MEMORY_OVERCLOCK=1000
  638. fi
  639.  
  640. # Cryptonight
  641.  
  642. if [ $COIN == "XMR" -o $COIN == "KRB" ]
  643. then
  644. POWERLIMIT_WATTS=62
  645. __CORE_OVERCLOCK=155
  646. MEMORY_OVERCLOCK=-300
  647. fi
  648.  
  649. # lyra2v2
  650.  
  651. if [ $COIN == "MONA" -o $COIN == "VTC" ]
  652. then
  653. POWERLIMIT_WATTS=65
  654. __CORE_OVERCLOCK=135
  655. MEMORY_OVERCLOCK=-1200
  656. fi
  657.  
  658. # ZCOIN lyra2v2
  659.  
  660. if [ $COIN == "ZCOIN" ]
  661. then
  662. POWERLIMIT_WATTS=65
  663. __CORE_OVERCLOCK=160
  664. MEMORY_OVERCLOCK=-1000
  665. fi
  666. fi
  667. fi
  668. ########################################################################################
  669. # + contributors:
  670.  
  671. # PoisonXA For Fixing Bugs And Adding Improvments To Version 1.4
  672. #
  673.  
  674. # BaliMiner: BaliMiner_TELEGRAM_ALERTS
  675. # BaliMiner BTC address:  1HbzxQ6AVeWYvFm322KtxZcJJLAqfJHpN8
  676.  
  677. # Leenoox For his sexy colours ;)
  678.  
  679. # damNmad: damNmad_ALGO_SPECIFIC_OC
  680. #          nvOC discord channel https://discordapp.com/invite/8YDFEvY
  681. #          Added Lots of COIN selections
  682. #          Alternative telegram alert
  683. # damNmad BTC address:  1Mtf6K7c3ZhBDcPz91c4wcQ95DxLn88zC
  684.  
  685. # IAmNotAJeep: IAmNotAJeep_and_Maxximus007_WATCHDOG
  686. #              Methods for improved system stability
  687. # IAmNotAJeep BTC address:  13PnEKpfVzNseWkrm6LoueKcCMPj74zPv7
  688.  
  689. # kk003: Alternative telegram alert ( very extensive )
  690. #        Telegram Setup Video          
  691. # kk003 BTC address:  196pMZnByg5UaPvJPK67ErAHgDPeSyu8QV
  692.  
  693. # lost_post: upPASTE (timeout based _Parallax_ Mode auto-updating)
  694. #            Methods for separating settings and implementation
  695. #            Methods for AUTO_UPDATE
  696. # lost_post BTC address:  1GFTEtLLvvwoa4ogDntD5oaXBgJLYokzTC
  697.  
  698. # Maxximus007: Maxximus007_AUTO_TEMPERATURE_CONTROL
  699. #              Expectless 1bash
  700. #          IAmNotAJeep_and_Maxximus007_WATCHDOG
  701. #       PoisonXA Added extra sensitivity to watch dog
  702. # Maxximus007 BTC address:  1JAFefdPVAs3WQiTqnYWbsjifJAEjQcjQ8
  703.  
  704. # meligo: FAQ website nvoc-mining-os.com        
  705. # meligo BTC address:  1AwUJMztX2ARZp8ULqR5UsK3b27om8j3vq
  706.  
  707. # papampi: PAPAMPI_WTM_AUTO_SWITCH
  708. #      PAPAMPI_WTM_PROFIT_CHECK
  709. #      added multiple COIN selections
  710. #          Alternative telegram alert and guide        
  711. # papampi BTC address:  1NsnsnqkkVuopTGvUSGrkMhhug8kg6zgP9
  712.  
  713. # _Parallax_:  _Parallax_ Mode ( wget + pastebin oneBash updating )
  714. #              Methods for image size reduction
  715. #              Methods for logging and system enhancements (with next version)    
  716. # _Parallax_ BTC address:  329k8rDgxHHcHAEXfwznqv25Go5LERGWLp
  717.  
  718. # salfter: SALFTER_NICEHASH_PROFIT_SWITCHING
  719. #          SALFTER_MPH_PROFIT_SWITCHING
  720. # salfter BTC address:  1TipsGocnz2N5qgAm9f7JLrsMqkb3oXe2
  721.  
  722. # xleejohnx: SRR support
  723. # xleejohnx BTC address:  1EY5WbiW3YkWanSKEGcjCETpQfCR81wc56
  724.  
  725. # Open a terminal to launch miner; will auto launch on boot
  726.  
  727. # firefox has an OP bookmark; look at the OP for more information
  728.  
  729. # USE ALL CAPS
  730. ########################################################################################
  731. # CHOOSE COIN FROM:
  732.  
  733. #ALGO - X11-GOST
  734. ######### SIB
  735.  
  736. #ALGO - CryptoNight
  737. ######### XMR  KRB  ETN
  738.  
  739. #ALGO - Skunk
  740. ######### SIGT  ZPOOL_SKUNK  
  741.  
  742. #ALGO - Ethash
  743. ######### ETH  ETC  EXP  UBQ  MUSIC  SOIL
  744.  
  745. #ALGO - Equihash
  746. ######### ZEC  ZEN  HUSH  ZCL  KMD  BTG  MNX
  747.  
  748. #ALGO - NiceHash
  749. ######### DUAL_NICEHASH (Ethash + Decred)  NICE_EQUIHASH  NICE_ETHASH
  750.  
  751. #ALGO - X13
  752. ######### ONION
  753.  
  754. #ALGO - Neoscrypt
  755. ######### PXC  FTC  ORB
  756.  
  757. #ALGO - Myriad-Groestl
  758. ######### XMY
  759.  
  760. #ALGO - LYRA2V2
  761. ######### MONA  VTC  ZCOIN
  762.  
  763. #ALGO - SKEIN
  764. ######### DGB
  765.  
  766. #ALGO - GROESTL
  767. ######### GRS
  768.  
  769. #ALGO - SIA
  770. ######### SIA
  771.  
  772. #ALGO - LBRY
  773. ######### LBC (LBRY)
  774.  
  775. #ALGO - Decred
  776. ######### DCR
  777.  
  778. #ALGO - Pascal
  779. ######### PASC PASL
  780.  
  781. #ALGO - timetravel10
  782. ######### BTX
  783.  
  784. #TYPE - Zpool (auto converts to BTC)
  785. ######### ZPOOL_LYRA2V2  ZPOOL_BLAKE2S  ZPOOL_EQUIHASH  ZPOOL_LBC  ZPOOL_NEOSCRYPT  ZPOOL_LBRY  ZPOOL_SKEIN
  786.  
  787. #TYPE - DUAL Claymore (ETHASH + DCR/LBC/PASC/PASL/SC)
  788. ######### DUAL_ETH_DCR    DUAL_ETH_PASC    DUAL_ETH_PASL    DUAL_ETH_LBC    DUAL_ETH_SC
  789. ######### DUAL_ETC_DCR    DUAL_ETC_PASC    DUAL_ETC_PASL    DUAL_ETC_LBC    DUAL_ETC_SC
  790. ######### DUAL_EXP_DCR    DUAL_EXP_PASC    DUAL_EXP_PASL    DUAL_EXP_LBC    DUAL_EXP_SC
  791. ######### DUAL_MUSIC_DCR  DUAL_MUSIC_PASC  DUAL_MUSIC_PASL  DUAL_MUSIC_LBC  DUAL_MUSIC_SC
  792. ######### DUAL_UBQ_DCR    DUAL_UBQ_PASC    DUAL_UBQ_PASL    DUAL_UBQ_LBC    DUAL_UBQ_SC
  793. ######### DUAL_SOIL_DCR   DUAL_SOIL_PASC   DUAL_SOIL_PASL   DUAL_SOIL_LBC   DUAL_SOIL_SC
  794.  
  795. #TYPE - Miningpoolhub Auto Coin Switches based on Algo
  796. ######### MPH_ETHASH  MPH_EQUIHASH
  797.  
  798. #TYPE - Profit Switchers
  799. ######### SALFTER_NICEHASH_PROFIT_SWITCHING
  800. ######### SALFTER_MPH_PROFIT_SWITCHING
  801.  
  802. ### NEW COINS THIS VERSION:
  803.  
  804. ######### BTCZ
  805. ######### SMART
  806. ########################################################################################
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top