API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 12th, 2021
51
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.03 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 5.4.137 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16256-2d5ee43dc6)) #0 SMP Sat Jul 31 17:21:01 2021
  3. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] OF: fdt: Machine model: Asus RT-AC56U (BCM4708)
  6. [ 0.000000] Memory policy: Data cache writealloc
  7. [ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
  8. [ 0.000000] On node 0 totalpages: 65536
  9. [ 0.000000] Normal zone: 288 pages used for memmap
  10. [ 0.000000] Normal zone: 0 pages reserved
  11. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  12. [ 0.000000] HighMem zone: 32768 pages, LIFO batch:7
  13. [ 0.000000] percpu: Embedded 14 pages/cpu s26764 r8192 d22388 u57344
  14. [ 0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
  15. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  16. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65248
  17. [ 0.000000] Kernel command line: console=ttyS0,115200
  18. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  19. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  20. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  21. [ 0.000000] Memory: 251924K/262144K available (5196K kernel code, 153K rwdata, 732K rodata, 1024K init, 291K bss, 10220K reserved, 0K cma-reserved, 131072K highmem)
  22. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  23. [ 0.000000] rcu: Hierarchical RCU implementation.
  24. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  25. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  26. [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
  27. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  28. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  29. [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
  30. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  31. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
  32. [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
  33. [ 0.000000] random: get_random_bytes called from 0xc0700bbc with crng_init=0
  34. [ 0.000011] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 4398046511103ns
  35. [ 0.000033] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
  36. [ 0.000060] Switching to timer-based delay loop, resolution 2ns
  37. [ 0.000313] Calibrating delay loop (skipped), value calculated using timer frequency.. 800.00 BogoMIPS (lpj=4000000)
  38. [ 0.000328] pid_max: default: 32768 minimum: 301
  39. [ 0.000482] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  40. [ 0.000493] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  41. [ 0.001357] CPU: Testing write buffer coherency: ok
  42. [ 0.001405] CPU0: Spectre v2: using BPIALL workaround
  43. [ 0.001767] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  44. [ 0.002338] Setting up static identity map for 0x100000 - 0x10003c
  45. [ 0.002500] rcu: Hierarchical SRCU implementation.
  46. [ 0.002830] smp: Bringing up secondary CPUs ...
  47. [ 0.003666] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  48. [ 0.003676] CPU1: Spectre v2: using BPIALL workaround
  49. [ 0.003811] smp: Brought up 1 node, 2 CPUs
  50. [ 0.003822] SMP: Total of 2 processors activated (1600.00 BogoMIPS).
  51. [ 0.003829] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
  52. [ 0.003834] CPU: This may indicate a broken bootloader or firmware.
  53. [ 0.006443] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  54. [ 0.006471] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  55. [ 0.006644] pinctrl core: initialized pinctrl subsystem
  56. [ 0.007344] NET: Registered protocol family 16
  57. [ 0.008234] DMA: preallocated 256 KiB pool for atomic coherent allocations
  58. [ 0.024978] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
  59. [ 0.026815] clocksource: Switched to clocksource arm_global_timer
  60. [ 0.027628] thermal_sys: Registered thermal governor 'step_wise'
  61. [ 0.028287] NET: Registered protocol family 2
  62. [ 0.028477] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  63. [ 0.029155] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  64. [ 0.029192] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  65. [ 0.029213] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
  66. [ 0.029235] TCP: Hash tables configured (established 1024 bind 1024)
  67. [ 0.029349] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  68. [ 0.029382] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  69. [ 0.029601] NET: Registered protocol family 1
  70. [ 0.029637] PCI: CLS 0 bytes, default 64
  71. [ 0.031034] workingset: timestamp_bits=14 max_order=16 bucket_order=2
  72. [ 0.037204] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  73. [ 0.037223] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  74. [ 0.040889] bounce: pool size: 64 pages
  75. [ 0.040977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  76. [ 0.043109] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  77. [ 0.045515] printk: console [ttyS0] disabled
  78. [ 0.045595] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 6250000) is a 16550
  79. [ 0.519785] printk: console [ttyS0] enabled
  80. [ 0.524905] bcm2835-rng 18004000.rng: hwrng registered
  81. [ 0.541335] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
  82. [ 0.547663] nand: AMD/Spansion S34ML01G2
  83. [ 0.551606] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  84. [ 0.559157] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
  85. [ 0.569054] Scanning device for bad blocks
  86. [ 0.596713] random: fast init done
  87. [ 1.028153] random: crng init done
  88. [ 2.944742] 3 bcm47xxpart partitions found on MTD device brcmnand.0
  89. [ 2.950996] Creating 3 MTD partitions on "brcmnand.0":
  90. [ 2.956121] 0x000000000000-0x000000080000 : "boot"
  91. [ 2.961662] 0x000000080000-0x000000200000 : "nvram"
  92. [ 2.967169] 0x000000200000-0x000008000000 : "firmware"
  93. [ 2.975129] 2 trx partitions found on MTD device firmware
  94. [ 2.980515] Creating 2 MTD partitions on "firmware":
  95. [ 2.985484] 0x00000000001c-0x000000400000 : "linux"
  96. [ 2.991385] 0x000000400000-0x000007e00000 : "ubi"
  97. [ 2.998010] bcm_iproc 18029200.spi: using bspi-mspi mode
  98. [ 3.004923] libphy: iProc MDIO bus: probed
  99. [ 3.009028] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus at 0xad775b93
  100. [ 3.016398] libphy: mdio_mux: probed
  101. [ 3.020878] libphy: Fixed MDIO Bus: probed
  102. [ 3.025093] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  103. [ 3.031346] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0x00 and package 0x02
  104. [ 3.040311] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
  105. [ 3.050909] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  106. [ 3.050921] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
  107. [ 3.061679] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  108. [ 3.061691] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
  109. [ 3.071700] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  110. [ 3.082133] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  111. [ 3.092592] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  112. [ 3.103047] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
  113. [ 3.113377] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  114. [ 3.123902] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  115. [ 3.134442] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
  116. [ 3.145055] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  117. [ 3.145067] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
  118. [ 3.157121] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
  119. [ 3.167528] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
  120. [ 3.177944] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  121. [ 3.177956] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
  122. [ 3.188193] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  123. [ 3.188204] bcma-host-soc 18000000.axi: bus0: Core 14 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
  124. [ 3.199561] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  125. [ 3.199572] bcma-host-soc 18000000.axi: bus0: Core 15 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
  126. [ 3.212315] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  127. [ 3.212325] bcma-host-soc 18000000.axi: bus0: Core 16 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
  128. [ 3.222415] bcma-host-soc 18000000.axi: bus0: Core 17 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
  129. [ 3.234044] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  130. [ 3.234056] bcma-host-soc 18000000.axi: bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
  131. [ 3.245430] bcma-host-soc 18000000.axi: bus0: Flash type not supported
  132. [ 3.291215] can not parse nvram name (null)boardnum(null) with value 2c:56:dc:54:36:b0 got -22
  133. [ 3.352795] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 8 provided by platform.
  134. [ 3.353189] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
  135. [ 3.358789] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
  136. [ 3.378639] b53_common: found switch: BCM53011, rev 5
  137. [ 3.384687] bgmac_bcma bcma0:4: Found PHY addr: 0
  138. [ 3.389388] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
  139. [ 3.395909] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
  140. [ 3.402153] bgmac_bcma bcma0:4: Using random MAC: 1a:a5:97:7a:5d:14
  141. [ 3.410425] bgmac_bcma bcma0:5: Found PHY addr: 0
  142. [ 3.415166] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
  143. [ 3.421670] bgmac_bcma bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
  144. [ 3.427930] bgmac_bcma bcma0:5: Using random MAC: 1e:81:83:19:3f:ef
  145. [ 3.436234] bgmac_bcma bcma0:6: Unsupported core_unit 3
  146. [ 3.441479] bgmac_bcma: probe of bcma0:6 failed with error -524
  147. [ 3.563683] pcie_iproc_bcma bcma0:7: link: UP
  148. [ 3.568157] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
  149. [ 3.574432] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  150. [ 3.581281] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  151. [ 3.589196] pci 0000:00:00.0: [14e4:8011] type 01 class 0x060400
  152. [ 3.595201] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  153. [ 3.604818] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  154. [ 3.614445] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
  155. [ 3.624143] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
  156. [ 3.633856] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  157. [ 3.643587] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  158. [ 3.649660] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
  159. [ 3.660363] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  160. [ 3.670094] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  161. [ 3.679719] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
  162. [ 3.689327] PCI: bus0: Fast back to back transfers disabled
  163. [ 3.694879] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  164. [ 3.702848] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
  165. [ 3.712693] pci 0000:01:00.0: [14e4:a8db] type 00 class 0x028000
  166. [ 3.718732] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  167. [ 3.725538] pci 0000:01:00.0: enabling Extended Tags
  168. [ 3.730574] pci 0000:01:00.0: supports D1 D2
  169. [ 3.735777] PCI: bus1: Fast back to back transfers disabled
  170. [ 3.741336] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  171. [ 3.747942] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
  172. [ 3.754558] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  173. [ 3.761318] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  174. [ 3.768624] pci 0000:00:00.0: PCI bridge to [bus 01]
  175. [ 3.773566] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  176. [ 3.903678] pcie_iproc_bcma bcma0:8: link: UP
  177. [ 3.908148] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
  178. [ 3.914421] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
  179. [ 3.921265] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
  180. [ 3.929182] pci 0001:00:00.0: [14e4:8011] type 01 class 0x060400
  181. [ 3.935244] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
  182. [ 3.942268] PCI: bus0: Fast back to back transfers disabled
  183. [ 3.947840] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  184. [ 3.955961] pci 0001:01:00.0: [14e4:4360] type 00 class 0x028000
  185. [ 3.961980] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  186. [ 3.968868] pci 0001:01:00.0: supports D1 D2
  187. [ 3.974073] PCI: bus1: Fast back to back transfers disabled
  188. [ 3.979636] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
  189. [ 3.986236] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
  190. [ 3.992840] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  191. [ 3.999609] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
  192. [ 4.006913] pci 0001:00:00.0: PCI bridge to [bus 01]
  193. [ 4.011858] pci 0001:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  194. [ 4.133678] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
  195. [ 4.139838] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
  196. [ 4.145744] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
  197. [ 4.152948] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
  198. [ 4.161956] bcma-host-soc 18000000.axi: bus0: Bus registered
  199. [ 4.168010] pci 0000:00:00.0: enabling device (0140 -> 0142)
  200. [ 4.173677] bcma-pci-bridge 0000:01:00.0: enabling device (0140 -> 0142)
  201. [ 4.180394] bcma-pci-bridge 0000:01:00.0: bus1: Found chip with id 43217, rev 0x00 and package 0x08
  202. [ 4.189442] bcma-pci-bridge 0000:01:00.0: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
  203. [ 4.200029] bcma-pci-bridge 0000:01:00.0: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
  204. [ 4.210721] bcma-pci-bridge 0000:01:00.0: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)
  205. [ 4.220851] bcma-pci-bridge 0000:01:00.0: bus1: Found rev 12 PMU (capabilities 0x108C260C)
  206. [ 4.305402] bcma-pci-bridge 0000:01:00.0: bus1: Using SPROM revision 8 provided by platform.
  207. [ 4.305421] bcma-pci-bridge 0000:01:00.0: bus1: PMU resource config unknown or not needed for device 0xA8D1
  208. [ 4.313690] bcma-pci-bridge 0000:01:00.0: bus1: Workarounds unknown or not needed for device 0xA8D1
  209. [ 4.353976] bcma-pci-bridge 0000:01:00.0: bus1: Bus registered
  210. [ 4.360080] pci 0001:00:00.0: enabling device (0140 -> 0142)
  211. [ 4.365756] bcma-pci-bridge 0001:01:00.0: enabling device (0140 -> 0142)
  212. [ 4.372471] bcma-pci-bridge 0001:01:00.0: bus2: Found chip with id 0x4352, rev 0x03 and package 0x01
  213. [ 4.381603] bcma-pci-bridge 0001:01:00.0: bus2: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
  214. [ 4.392185] bcma-pci-bridge 0001:01:00.0: bus2: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
  215. [ 4.402864] bcma-pci-bridge 0001:01:00.0: bus2: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
  216. [ 4.413196] bcma-pci-bridge 0001:01:00.0: bus2: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
  217. [ 4.423693] bcma-pci-bridge 0001:01:00.0: bus2: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
  218. [ 4.434663] bcma-pci-bridge 0001:01:00.0: bus2: Found rev 17 PMU (capabilities 0x10A22B11)
  219. [ 4.434749] bcma-pci-bridge 0001:01:00.0: bus2: SPROM offset 0x800
  220. [ 4.466192] bcma-pci-bridge 0001:01:00.0: bus2: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
  221. [ 4.493149] bcma-pci-bridge 0001:01:00.0: bus2: Using SPROM revision 11 provided by platform.
  222. [ 4.493165] bcma-pci-bridge 0001:01:00.0: bus2: PMU resource config unknown or not needed for device 0x4352
  223. [ 4.503683] bcma-pci-bridge 0001:01:00.0: bus2: Workarounds unknown or not needed for device 0x4352
  224. [ 4.503699] bcma-pci-bridge 0001:01:00.0: bus2: Switched to core: 0x83C
  225. [ 4.504138] bcma-pci-bridge 0001:01:00.0: bus2: Bus registered
  226. [ 4.511107] NET: Registered protocol family 10
  227. [ 4.516933] Segment Routing with IPv6
  228. [ 4.520663] NET: Registered protocol family 17
  229. [ 4.525177] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  230. [ 4.538085] 8021q: 802.1Q VLAN Support v1.8
  231. [ 4.542314] Registering SWP/SWPB emulation handler
  232. [ 4.552009] UBI: auto-attach mtd4
  233. [ 4.555379] ubi0: attaching mtd4
  234. [ 5.189153] ubi0: scanning is finished
  235. [ 5.225901] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 926 LEBs
  236. [ 5.233120] ubi0: attached mtd4 (name "ubi", size 122 MiB)
  237. [ 5.238632] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  238. [ 5.245483] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  239. [ 5.252237] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  240. [ 5.259173] ubi0: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
  241. [ 5.265159] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  242. [ 5.272344] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1627752061
  243. [ 5.281437] ubi0: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad PEB handling: 20
  244. [ 5.290626] ubi0: background thread "ubi_bgt0d" started, PID 489
  245. [ 5.297821] block ubiblock0_0: created from ubi0:0(rootfs)
  246. [ 5.303293] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  247. [ 5.319226] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  248. [ 5.327554] Freeing unused kernel memory: 1024K
  249. [ 5.350306] Run /sbin/init as init process
  250. [ 5.753097] init: Console is alive
  251. [ 5.756788] init: - watchdog -
  252. [ 6.325202] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  253. [ 6.431267] usbcore: registered new interface driver usbfs
  254. [ 6.436855] usbcore: registered new interface driver hub
  255. [ 6.442238] usbcore: registered new device driver usb
  256. [ 6.451414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  257. [ 6.458990] ehci-fsl: Freescale EHCI Host controller driver
  258. [ 6.465601] ehci-platform: EHCI generic platform driver
  259. [ 6.473605] ehci-platform 18021000.usb: EHCI Host Controller
  260. [ 6.479331] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
  261. [ 6.483467] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  262. [ 6.487443] ehci-platform 18021000.usb: irq 37, io mem 0x18021000
  263. [ 6.494780] ohci-platform: OHCI generic platform driver
  264. [ 6.504917] ohci-platform 18022000.usb: Generic Platform OHCI controller
  265. [ 6.511714] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
  266. [ 6.519684] ohci-platform 18022000.usb: irq 37, io mem 0x18022000
  267. [ 6.533853] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
  268. [ 6.540787] hub 1-0:1.0: USB hub found
  269. [ 6.544723] hub 1-0:1.0: 2 ports detected
  270. [ 6.594882] hub 2-0:1.0: USB hub found
  271. [ 6.598855] hub 2-0:1.0: 2 ports detected
  272. [ 6.680197] xhci-hcd 18023000.usb: xHCI Host Controller
  273. [ 6.685469] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
  274. [ 6.693203] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000001000010010
  275. [ 6.702406] xhci-hcd 18023000.usb: irq 38, io mem 0x18023000
  276. [ 6.709097] hub 3-0:1.0: USB hub found
  277. [ 6.713022] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
  278. [ 6.720371] xhci-hcd 18023000.usb: xHCI Host Controller
  279. [ 6.725625] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 4
  280. [ 6.733045] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
  281. [ 6.760248] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  282. [ 6.768907] hub 4-0:1.0: USB hub found
  283. [ 6.772776] hub 4-0:1.0: 1 port detected
  284. [ 6.779766] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  285. [ 6.804127] init: - preinit -
  286. [ 9.871814] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
  287. [ 9.879113] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  288. [ 9.885823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  289. [ 14.110327] UBIFS (ubi0:1): default file-system created
  290. [ 14.116427] UBIFS (ubi0:1): Mounting in unauthenticated mode
  291. [ 14.122249] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 670
  292. [ 14.203023] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  293. [ 14.210868] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  294. [ 14.220747] UBIFS (ubi0:1): FS size: 116183040 bytes (110 MiB, 915 LEBs), journal size 5840896 bytes (5 MiB, 46 LEBs)
  295. [ 14.231313] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  296. [ 14.237901] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 5351E756-C1AE-4441-A4F1-CF3C80AA067B, small LPT model
  297. [ 14.251382] mount_root: overlay filesystem has not been fully initialized yet
  298. [ 14.258792] mount_root: switching to ubifs overlay
  299. [ 14.268688] urandom-seed: Seed file not found (/etc/urandom.seed)
  300. [ 14.395500] procd: - early -
  301. [ 14.398449] procd: - watchdog -
  302. [ 14.970273] procd: - watchdog -
  303. [ 15.030685] procd: - ubus -
  304. [ 15.092542] procd: - init -
  305. [ 15.554721] urngd: v1.0.2 started.
  306. [ 15.631630] kmodloader: loading kernel modules from /etc/modules.d/*
  307. [ 15.707352] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff
  308. [ 15.715039] Backport generated by backports.git v5.10.42-1-0-gbee5c545
  309. [ 15.739162] xt_time: kernel timezone is -0000
  310. [ 15.789349] PPP generic driver version 2.4.2
  311. [ 15.795569] NET: Registered protocol family 24
  312. [ 15.819039] b43-phy0: Broadcom 43217 WLAN found (core revision 30)
  313. [ 15.825287] bcma-pci-bridge 0000:01:00.0: bus1: Switched to core: 0x812
  314. [ 15.833755] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17
  315. [ 15.839917] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 1
  316. [ 15.853988] b43-phy1: Broadcom 4352 WLAN found (core revision 42)
  317. [ 15.860075] bcma-pci-bridge 0001:01:00.0: bus2: Switched to core: 0x812
  318. [ 15.880421] bcma-pci-bridge 0001:01:00.0: bus2: HT force timeout
  319. [ 15.997974] bcma-pci-bridge 0001:01:00.0: bus2: PLL enable timeout
  320. [ 16.004136] b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
  321. [ 16.012150] b43: probe of bcma2:1 failed with error -95
  322. [ 16.017472] Broadcom 43xx driver loaded [ Features: PNL ]
  323. [ 16.028004] kmodloader: done loading kernel modules from /etc/modules.d/*
  324. [ 16.073353] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  325. [ 34.937912] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
  326. [ 34.950077] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  327. [ 34.958630] br-lan: port 1(eth0.1) entered blocking state
  328. [ 34.964138] br-lan: port 1(eth0.1) entered disabled state
  329. [ 34.969903] device eth0.1 entered promiscuous mode
  330. [ 34.974724] device eth0 entered promiscuous mode
  331. [ 34.991248] br-lan: port 1(eth0.1) entered blocking state
  332. [ 34.996754] br-lan: port 1(eth0.1) entered forwarding state
  333. [ 36.003779] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!