Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Linux version 3.0.8+ (brain@pfd-desktop) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #4 PREEMPT Sat Apr 28 12:03:32 CST 2012
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun5i
- [ 0.000000] Total Detected Memory: 512MB with 2 banks
- [ 0.000000] Memory Reserved(in bytes):
- [ 0.000000] LCD: 0x48000000, 0x01000000
- [ 0.000000] SYS: 0x43000000, 0x00010000
- [ 0.000000] VE : 0x44000000, 0x04000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] On node 0 totalpages: 114688
- [ 0.000000] free_area_init_node: node 0, pgdat c083d694, node_mem_map c09f8000
- [ 0.000000] Normal zone: 1024 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 113664 pages, LIFO batch:31
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
- [ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=8
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 144MB 304MB = 448MB total
- [ 0.000000] Memory: 361996k/361996k available, 96756k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc0031000 ( 164 kB)
- [ 0.000000] .text : 0xc0031000 - 0xc07e8548 (7902 kB)
- [ 0.000000] .data : 0xc07ea000 - 0xc0844100 ( 361 kB)
- [ 0.000000] .bss : 0xc0844124 - 0xc09f7f78 (1744 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:96 nr_irqs:96 96
- [ 0.000000] timer0: Periodic Mode
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
- [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
- [ 0.040000] pid_max: default: 32768 minimum: 301
- [ 0.040000] Mount-cache hash table entries: 512
- [ 0.040000] Initializing cgroup subsys cpuacct
- [ 0.040000] Initializing cgroup subsys devices
- [ 0.040000] Initializing cgroup subsys freezer
- [ 0.040000] Initializing cgroup subsys blkio
- [ 0.040000] CPU: Testing write buffer coherency: ok
- [ 0.040000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.040000] devtmpfs: initialized
- [ 0.040000] print_constraints: dummy:
- [ 0.040000] NET: Registered protocol family 16
- [ 0.040000] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.040000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
- [ 0.040000] Initialize DMAC OK
- [ 0.040000] bio: create slab <bio-0> at 0
- [ 0.040000] SCSI subsystem initialized
- [ 0.040000] usbcore: registered new interface driver usbfs
- [ 0.040000] usbcore: registered new interface driver hub
- [ 0.040000] usbcore: registered new device driver usb
- [ 0.040000] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.040000] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.040000] Init eGon pin module V2.0
- [ 0.040000] Switching to clocksource aw 64bits couter
- [ 0.040000] FS-Cache: Loaded
- [ 0.040000] CacheFiles: Loaded
- [ 0.050000] Switched to NOHz mode on CPU #0
- [ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
- [ 0.050000] [sw_hcd0]: usb host driver initialize........
- [ 0.050000] [sw_hcd0]: open_usb_clock
- [ 0.060000] [hcd0]: open, 0x60(0xc061), 0xcc(0x101)
- [ 0.060000] [sw_hcd0]: host_init_state = 0
- [ 0.060000] [sw_hcd0]: platform is usb host
- [ 0.060000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
- [ 0.060000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
- [ 0.060000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
- [ 0.060000] hub 1-0:1.0: USB hub found
- [ 0.060000] hub 1-0:1.0: 1 port detected
- [ 0.060000] wrn: hcd is not enable, need not start hcd
- [ 0.060000] [sw_hcd0]: sw_usb_host0_disable start
- [ 0.060000] -------sw_hcd0_soft_disconnect---------
- [ 0.060000] [sw_hcd_host0]: Set USB Power OFF
- [ 0.060000] wrn: hcd is not enable, need not stop hcd
- [ 0.060000] [sw_hcd0]: close_usb_clock
- [ 0.060000] [hcd0]: close, 0x60(0xc060), 0xcc(0x0)
- [ 0.060000] [sw_hcd0]: sw_usb_host0_disable end
- [ 0.060000] [sw_udc]: udc_init: version 20080411
- [ 0.060000] axp driver uning configuration failed(539)
- [ 0.060000] axp driver uning configuration failed(551)
- [ 0.060000] NET: Registered protocol family 2
- [ 0.060000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.060000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.060000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.060000] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.060000] TCP reno registered
- [ 0.060000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.060000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.060000] NET: Registered protocol family 1
- [ 0.070000] RPC: Registered named UNIX socket transport module.
- [ 0.070000] RPC: Registered udp transport module.
- [ 0.070000] RPC: Registered tcp transport module.
- [ 0.070000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.070000] Trying to unpack rootfs image as initramfs...
- [ 0.110000] Freeing initrd memory: 532K
- [ 0.110000] [pm]aw_pm_init!
- [ 0.110000] audit: initializing netlink socket (disabled)
- [ 0.110000] type=2000 audit(0.109:1): initialized
- [ 0.120000] ashmem: initialized
- [ 0.120000] VFS: Disk quotas dquot_6.5.2
- [ 0.120000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.130000] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.130000] fuse init (API version 7.16)
- [ 0.130000] msgmni has been set to 708
- [ 0.130000] alg: No test for stdrng (krng)
- [ 0.130000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.130000] io scheduler noop registered
- [ 0.130000] io scheduler deadline registered
- [ 0.130000] io scheduler cfq registered (default)
- [ 0.130000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.160000] serial8250.0: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A
- [ 0.790000] console [ttyS0] enabled
- [ 0.810000] sunxi-uart.1: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A
- [ 0.820000] brd: module loaded
- [ 0.820000] loop: module loaded
- [ 0.830000] [NAND]nand driver, init.
- [ 0.830000] [NAND] nand gpio_request
- [ 0.830000] [NAND] nand driver version: 0x2 0x9
- [ 0.840000] nand interrupte register ok
- [ 0.840000] ret of NFC_ChangMode is 0
- [ 0.850000] dma_hdle is 0
- [ 0.850000] dma_hdle is 10000008
- [ 0.870000] The 0 disk name = bootloader, class name = DISK, disk size = 32768
- [ 0.880000] The 1 disk name = env, class name = DISK, disk size = 4096
- [ 0.880000] The 2 disk name = boot, class name = DISK, disk size = 65536
- [ 0.890000] The 3 disk name = system, class name = DISK, disk size = 614400
- [ 0.900000] The 4 disk name = data, class name = DISK, disk size = 2097152
- [ 0.900000] The 5 disk name = misc, class name = DISK, disk size = 2048
- [ 0.910000] The 6 disk name = recovery, class name = DISK, disk size = 65536
- [ 0.920000] The 7 disk name = cache, class name = DISK, disk size = 614400
- [ 0.920000] The 8 disk name = UDISK, class name = DISK, disk size = 4284416
- [ 0.930000] The 8 disk size = 4284416
- [ 0.940000] part total count = 9
- [ 0.940000] nanda:
- [ 0.940000] nandb: unknown partition table
- [ 0.950000] nandc: unknown partition table
- [ 0.950000] nandd: unknown partition table
- [ 0.960000] nande: unknown partition table
- [ 0.970000] nandf: unknown partition table
- [ 0.970000] nandg: unknown partition table
- [ 0.980000] nandh: unknown partition table
- [ 0.980000] nandi:
- [ 0.980000] benn: nand probe enter
- [ 0.990000] [NAND]nand driver, ok.
- [ 0.990000] [spi]: sw spi init !!
- [ 0.990000] [spi]: sw spi init fetch spi0 uning configuration failed
- [ 1.000000] [spi]: Get spi devices number failed
- [ 1.010000] [spi]: register spi devices board info failed
- [ 1.010000] spi: cannot find any using configuration for all 4 spi controllers, return directly!
- [ 1.020000] PPP generic driver version 2.4.2
- [ 1.030000] PPP Deflate Compression module registered
- [ 1.030000] PPP BSD Compression module registered
- [ 1.040000] PPP MPPE Compression module registered
- [ 1.040000] NET: Registered protocol family 24
- [ 1.050000] PPTP driver version 0.8.5
- [ 1.050000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.060000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.060000] Initializing USB Mass Storage driver...
- [ 1.070000] usbcore: registered new interface driver usb-storage
- [ 1.070000] USB Mass Storage support registered.
- [ 1.080000] usbcore: registered new interface driver ums-alauda
- [ 1.080000] usbcore: registered new interface driver ums-cypress
- [ 1.090000] usbcore: registered new interface driver ums-datafab
- [ 1.100000] usbcore: registered new interface driver ums_eneub6250
- [ 1.100000] usbcore: registered new interface driver ums-freecom
- [ 1.110000] usbcore: registered new interface driver ums-isd200
- [ 1.110000] usbcore: registered new interface driver ums-jumpshot
- [ 1.120000] usbcore: registered new interface driver ums-karma
- [ 1.130000] usbcore: registered new interface driver ums-onetouch
- [ 1.130000] usbcore: registered new interface driver ums-realtek
- [ 1.140000] usbcore: registered new interface driver ums-sddr09
- [ 1.140000] usbcore: registered new interface driver ums-sddr55
- [ 1.150000] usbcore: registered new interface driver ums-usbat
- [ 1.160000] usbcore: registered new interface driver usbserial
- [ 1.160000] USB Serial support registered for generic
- [ 1.170000] usbcore: registered new interface driver usbserial_generic
- [ 1.170000] usbserial: USB Serial Driver core
- [ 1.180000] USB Serial support registered for GSM modem (1-port)
- [ 1.180000] usbcore: registered new interface driver option
- [ 1.190000] option: v0.7.2:USB Driver for GSM modems
- [ 1.200000] ------print_msc_config-----
- [ 1.200000] vendor_id = 0x18d1
- [ 1.200000] mass_storage_id = 0x1
- [ 1.210000] adb_id = 0x2
- [ 1.210000] usb_manufacturer_name = USB Developer
- [ 1.220000] usb_product_name = Android
- [ 1.220000] usb_serial_number = 20080411
- [ 1.220000] msc_vendor_name = NUCLEAR
- [ 1.230000] msc_product_name = USB Flash Driver
- [ 1.230000] msc_release = 100
- [ 1.240000] luns = 2
- [ 1.240000] ---------------------------
- [ 1.240000] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
- [ 1.250000] [sw_udc]: alloc request: ep(0xc0826b50, ep0, 64), req(0xdf031840)
- [ 1.260000] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.270000] [sw_udc]: sw_udc_pullup, is_on = 0
- [ 1.270000] WRN:L2729(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.280000] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.290000] android_usb gadget: Number of LUNs=2
- [ 1.290000] lun0: LUN: removable file: (no medium)
- [ 1.300000] lun1: LUN: removable file: (no medium)
- [ 1.300000] lun name: lun
- [ 1.300000] lun name: lun1
- [ 1.310000] Gadget Android: controller 'sw_usb_udc' not recognized
- [ 1.310000] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.320000] android_usb gadget: android_usb ready
- [ 1.330000] mousedev: PS/2 mouse device common for all mice
- [ 1.330000] ========RTC Inital ===================
- [ 1.340000] rtc_fetch_sysconfig_para: after: rtc_twi_addr is 0x51, dirty_addr_buf: 0x51. dirty_addr_buf[1]: 0xfffe
- [ 1.350000] rtc_fetch_sysconfig_para: rtc_twi_id is 1.
- [ 1.350000] rtc_fetch_sysconfig_para:ok
- [ 1.360000] pcf8563_init: line:1045,after fetch_sysconfig_para: normal_i2c: 0x51. normal_i2c[1]: 0xfffe
- [ 1.370000] i2c /dev entries driver
- [ 1.370000] !!! base_Addr = 0xe08ecc00
- [ 1.370000] config i2c gpio with gpio_config api
- [ 1.380000] twi0, apb clock = 24000000
- [ 1.380000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
- [ 1.390000] [AXP]axp driver uning configuration failed(323)
- [ 1.400000] [AXP]power_start = 0
- [ 1.400000] rtc_detect,line:194,twi_id:1,adapter->nr:0
- [ 1.400000] rtc_detect,line:203
- [ 1.410000] I2C: i2c-0: AW16XX I2C adapter
- [ 1.410000] **********start************
- [ 1.420000] 0x40
- [ 1.420000] 0xf8
- [ 1.420000] 0x28
- [ 1.420000] 0x0
- [ 1.420000] 0x0
- [ 1.420000] **********end************
- [ 1.430000] !!! base_Addr = 0xe08ee000
- [ 1.430000] twi1, apb clock = 24000000
- [ 1.440000] rtc_detect,line:194,twi_id:1,adapter->nr:1
- [ 1.440000] rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
- [ 1.450000] rtc_detect,line:199
- [ 1.450000] pcf8563_probe,line:944
- [ 1.450000] pcf8563 1-0051: chip found, driver version 0.4.3
- [ 1.460000] pcf8563_get_datetime,line:371
- [ 1.470000] pcf8563_get_datetime,raw data is st1=8, st2=64, sec=80, min=8, hr=82, mday=100, wday=82, mon=200, year=2
- [ 1.480000] pcf8563_get_datetime,line:415, tm is secs=50, mins=8, hours=12,mday=24, mon=7, year=112, wday=2
- [ 1.490000] pcf8563_read_alarm: alm_tm is secs=0, mins=0, hours=0,mday=0, mon=7, year=112, wday=0
- [ 1.500000] pcf8563_get_datetime,line:371
- [ 1.500000] pcf8563_get_datetime,raw data is st1=8, st2=64, sec=80, min=8, hr=82, mday=100, wday=82, mon=200, year=2
- [ 1.510000] pcf8563_get_datetime,line:415, tm is secs=50, mins=8, hours=12,mday=24, mon=7, year=112, wday=2
- [ 1.520000] rtc (null): alarm rollover not handled
- [ 1.530000] using rtc device, pcf8563, for alarms
- [ 1.530000] pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
- [ 1.540000] pcf8563_probe, line:972, client->irq:0
- [ 1.540000] pcf8563_probe,line:978, client->irq:0
- [ 1.550000] pcf8563_alarm_disable,541
- [ 1.550000] pcf8563_alarm_disable,line:549,ret:64,stat:40
- [ 1.560000] pcf8563_alarm_disable,line:553,ret:64,stat:40
- [ 1.560000] pcf8563_alarm_disable,line:566,ret:128,stat_min:80
- [ 1.570000] pcf8563_alarm_disable,line:569, stat_min:80
- [ 1.570000] pcf8563_alarm_disable,line:581,ret:128,stat_hour:80
- [ 1.580000] pcf8563_alarm_disable,line:584, stat_hour:80
- [ 1.590000] pcf8563_alarm_disable,line:596,ret:128,stat_day:80
- [ 1.590000] pcf8563_alarm_disable,line:599, stat_day:80
- [ 1.600000] PCF8563_REG_ST2:pcf8563_alarm_disable,line:607, ret:64
- [ 1.600000] PCF8563_REG_AMN:pcf8563_alarm_disable,line:611, ret:128
- [ 1.610000] PCF8563_REG_AHRpcf8563_alarm_disable,line:615, ret:128
- [ 1.620000] pcf8563_alarm_disable,line:619, ret:128
- [ 1.620000] I2C: i2c-1: AW16XX I2C adapter
- [ 1.630000] **********start************
- [ 1.630000] 0x40
- [ 1.630000] 0xf8
- [ 1.630000] 0x58
- [ 1.640000] 0x0
- [ 1.640000] 0x0
- [ 1.640000] **********end************
- [ 1.640000] !!! base_Addr = 0xe08f0400
- [ 1.650000] twi2, apb clock = 24000000
- [ 1.650000] rtc_detect,line:194,twi_id:1,adapter->nr:2
- [ 1.660000] rtc_detect,line:203
- [ 1.660000] I2C: i2c-2: AW16XX I2C adapter
- [ 1.660000] **********start************
- [ 1.670000] 0x40
- [ 1.670000] 0xf8
- [ 1.670000] 0x58
- [ 1.670000] 0x0
- [ 1.670000] 0x0
- [ 1.680000] **********end************
- [ 1.680000] lirc_dev: IR Remote Control driver registered, major 250
- [ 1.690000] IR NEC protocol handler initialized
- [ 1.690000] IR RC5(x) protocol handler initialized
- [ 1.700000] IR RC6 protocol handler initialized
- [ 1.700000] IR JVC protocol handler initialized
- [ 1.710000] IR Sony protocol handler initialized
- [ 1.710000] IR RC5 (streamzap) protocol handler initialized
- [ 1.720000] IR LIRC bridge handler initialized
- [ 1.720000] Linux video capture interface: v2.00
- [ 1.720000] [cedar dev]: install start!!!
- [ 1.730000] [cedar dev]: install end!!!
- [ 1.730000] [pa_drv] start!!!
- [ 1.740000] [pa_drv] init end!!!
- [ 1.740000] print_constraints: axp20_ldo1: 1300 mV
- [ 1.740000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
- [ 1.750000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 3300 mV
- [ 1.760000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
- [ 1.770000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
- [ 1.780000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1200 mV
- [ 1.780000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
- [ 1.790000] input: axp20-supplyer as /devices/platform/sun5i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
- [ 1.800000] pmu_pekoff_time = 6000
- [ 1.810000] pmu_pekoff_en = 1
- [ 1.810000] pmu_peklong_time = 1500
- [ 1.810000] pmu_pekon_time = 1000
- [ 1.820000] pmu_pwrok_time = 64
- [ 1.820000] pmu_pwrnoe_time = 2000
- [ 1.820000] pmu_intotp_en = 1
- [ 1.830000] [AXP]1823-->0x42
- [ 1.830000] POWER20_PEK_SET:1842-->0x9d
- [ 1.840000] POWER20_PEK_SET:1853-->0x9d
- [ 1.840000] POWER20_PEK_SET:1862-->0x9d
- [ 1.840000] POWER20_PEK_SET:1873-->0x9d
- [ 1.850000] POWER20_PEK_SET:1885-->0x9d
- [ 1.850000] POWER20_HOTOVER_CTL:1894-->0xad
- [ 1.860000] Cur_CoulombCounter = 0
- [ 1.860000] last_rest_vol = 57, now_rest_vol = 57
- [ 1.870000] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 1.880000] device-mapper: multipath: version 1.3.0 loaded
- [ 1.890000] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 1.890000] device-mapper: multipath queue-length: version 0.1.0 loaded
- [ 1.900000] device-mapper: multipath service-time: version 0.2.0 loaded
- [ 1.910000] [mmc_pm]: no sdio card used in configuration
- [ 1.910000] [mmc]: sunximmc_init
- [ 1.910000] [mmc]: sunxi mmc controller using config : 0x1
- [ 1.920000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
- [ 1.930000] [mmc]: mmc 0 power off !!
- [ 1.930000] [mmc]: mmc0 Probe: base:0xe08f6000 irq:32 dma:0 pdes:0xdf080000, ret 0.
- [ 1.940000] usbcore: registered new interface driver usbhid
- [ 1.940000] usbhid: USB HID core driver
- [ 1.950000] logger: created 256K log 'log_main'
- [ 1.950000] logger: created 256K log 'log_events'
- [ 1.960000] logger: created 256K log 'log_radio'
- [ 1.960000] logger: created 256K log 'log_system'
- [ 1.970000] enter sun5i Audio codec!!!
- [ 1.970000] sun5i audio support initialized
- [ 1.980000] sun5i Audio codec successfully loaded..
- [ 1.980000] ALSA device list:
- [ 1.990000] #0: sun5i-CODEC Audio Codec
- [ 1.990000] Netfilter messages via NETLINK v0.30.
- [ 1.990000] nf_conntrack version 0.5.0 (5664 buckets, 22656 max)
- [ 2.000000] ctnetlink v0.93: registering with nfnetlink.
- [ 2.010000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 2.010000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 2.020000] IPv4 over IPv4 tunneling driver
- [ 2.020000] GRE over IPv4 demultiplexor driver
- [ 2.030000] GRE over IPv4 tunneling driver
- [ 2.030000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.040000] TCP cubic registered
- [ 2.040000] Initializing XFRM netlink socket
- [ 2.050000] NET: Registered protocol family 10
- [ 2.050000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.060000] IPv6 over IPv4 tunneling driver
- [ 2.060000] NET: Registered protocol family 17
- [ 2.070000] NET: Registered protocol family 15
- [ 2.070000] L2TP core driver, V2.0
- [ 2.070000] PPPoL2TP kernel driver, V2.0
- [ 2.080000] L2TP IP encapsulation support (L2TPv3)
- [ 2.080000] L2TP netlink interface
- [ 2.090000] L2TP ethernet pseudowire support (L2TPv3)
- [ 2.090000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 2.100000] Registering SWP/SWPB emulation handler
- [ 2.110000] registered taskstats version 1
- [ 2.110000] [LCD] lcd_module_init
- [ 2.680000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
- [ 2.690000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
- [ 2.690000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
- [ 2.700000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
- [ 2.710000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
- [ 2.720000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc08edd9c
- [ 2.730000] [sw-ehci1]: open clock
- [ 2.750000] usb_passby en=1,passly=0
- [ 2.750000] hci_port_configure en=1,config_cnt=0
- [ 2.760000] [sw-ehci1]: Set USB Power ON
- [ 2.760000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.770000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
- [ 2.780000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
- [ 2.800000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
- [ 2.800000] ehci_irq: port change detect
- [ 2.800000] hub 2-0:1.0: USB hub found
- [ 2.810000] hub 2-0:1.0: 1 port detected
- [ 2.810000] [sw-ehci1]: sw_usb_disable_ehci
- [ 2.820000] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc08edd9c
- [ 2.830000] sw-ehci sw-ehci.1: remove, state 1
- [ 2.830000] usb usb2: USB disconnect, device number 1
- [ 2.840000] sw-ehci sw-ehci.1: USB bus 2 deregistered
- [ 2.840000] [sw-ehci1]: Set USB Power OFF
- [ 2.840000] hci_port_configure en=0,config_cnt=1
- [ 2.850000] usb_passby en=0,passly=1
- [ 2.850000] [sw-ehci1]: close clock
- [ 2.860000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc08edeb0
- [ 2.860000] [sw-ohci1]: open clock
- [ 2.890000] hci_port_configure en=1,config_cnt=0
- [ 2.890000] usb_passby en=1,passly=0
- [ 2.900000] [sw-ohci1]: Set USB Power ON
- [ 2.900000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 2.910000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
- [ 2.910000] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
- [ 2.980000] hub 2-0:1.0: USB hub found
- [ 2.980000] hub 2-0:1.0: 1 port detected
- [ 2.990000] [sw-ohci1]: sw_usb_disable_ohci
- [ 2.990000] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc08edeb0
- [ 3.000000] sw-ohci sw-ohci.1: remove, state 1
- [ 3.000000] usb usb2: USB disconnect, device number 1
- [ 3.010000] sw-ohci sw-ohci.1: USB bus 2 deregistered
- [ 3.010000] [sw-ohci1]: Set USB Power OFF
- [ 3.020000] usb_passby en=0,passly=1
- [ 3.020000] hci_port_configure en=0,config_cnt=1
- [ 3.030000] [sw-ohci1]: close clock
- [ 3.030000] pcf8563_get_datetime,line:371
- [ 3.040000] pcf8563_get_datetime,raw data is st1=8, st2=64, sec=82, min=8, hr=82, mday=100, wday=82, mon=200, year=2
- [ 3.050000] pcf8563_get_datetime,line:415, tm is secs=52, mins=8, hours=12,mday=24, mon=7, year=112, wday=2
- [ 3.060000] pcf8563 1-0051: setting system clock to 2012-08-24 12:08:52 UTC (1345810132)
- [ 3.060000] Freeing init memory: 164K
- [ 3.120000] init: width = 800
- [ 3.130000] init: height = 480
- [ 3.130000] init: s.st_size = 1536000
- [ 3.140000] init: command 'loglevel' r=0
- [ 3.150000] init: command 'export' r=0
- [ 3.150000] init: command 'export' r=0
- [ 3.150000] init: command 'export' r=0
- [ 3.160000] init: command 'export' r=0
- [ 3.160000] init: command 'export' r=0
- [ 3.170000] init: command 'export' r=0
- [ 3.170000] init: command 'export' r=0
- [ 3.170000] init: command 'export' r=0
- [ 3.180000] init: command 'export' r=0
- [ 3.180000] init: command 'symlink' r=0
- [ 3.180000] init: command 'symlink' r=0
- [ 3.190000] init: command 'symlink' r=0
- [ 3.190000] init: command 'mkdir' r=0
- [ 3.200000] init: command 'mount' r=0
- [ 3.200000] init: command 'mkdir' r=0
- [ 3.200000] init: command 'mkdir' r=0
- [ 3.210000] init: command 'mkdir' r=0
- [ 3.210000] init: command 'mkdir' r=0
- [ 3.210000] init: command 'mkdir' r=0
- [ 3.220000] init: command 'mkdir' r=0
- [ 3.220000] init: command 'mkdir' r=0
- [ 3.230000] init: command 'mkdir' r=0
- [ 3.230000] init: command 'mkdir' r=0
- [ 3.230000] init: command 'mount' r=0
- [ 3.240000] init: command 'mkdir' r=0
- [ 3.240000] init: command 'mount' r=0
- [ 3.240000] init: command 'write' r=0
- [ 3.250000] init: command 'write' r=-2
- [ 3.250000] init: command 'write' r=0
- [ 3.260000] init: command 'write' r=0
- [ 3.260000] init: command 'write' r=0
- [ 3.260000] init: command 'write' r=-2
- [ 3.270000] init: command 'write' r=0
- [ 3.270000] init: command 'mkdir' r=0
- [ 3.270000] init: command 'mount' r=-1
- [ 3.280000] init: command 'chown' r=0
- [ 3.280000] init: command 'chown' r=-2
- [ 3.290000] init: command 'chmod' r=-2
- [ 3.290000] init: command 'write' r=0
- [ 3.290000] init: command 'mkdir' r=0
- [ 3.300000] init: command 'chown' r=-2
- [ 3.300000] init: command 'chmod' r=-2
- [ 3.300000] init: command 'write' r=0
- [ 3.310000] init: command 'mkdir' r=0
- [ 3.310000] init: command 'chown' r=-2
- [ 3.320000] init: command 'chmod' r=-2
- [ 3.320000] init: command 'write' r=0
- [ 3.320000] init: command 'chmod' r=0
- [ 3.330000] init: processing action 0x39c6a0 (fs)
- [ 3.340000] EXT4-fs (nandd): barriers disabled
- [ 3.350000] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 3.360000] init: command 'mount' r=0
- [ 3.360000] init: command 'wait' r=0
- [ 3.370000] EXT4-fs (nande): barriers disabled
- [ 3.390000] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 49407
- [ 3.400000] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 49679
- [ 3.420000] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 32849
- [ 3.430000] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 40977
- [ 3.440000] EXT4-fs (nande): 4 orphan inodes deleted
- [ 3.450000] EXT4-fs (nande): recovery complete
- [ 3.470000] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 3.470000] init: command 'mount' r=0
- [ 3.480000] init: command 'setupfs' r=0
- [ 3.480000] init: do_umount: /data
- [ 3.500000] init: command 'umount' r=0
- [ 3.580000] init: command 'exec' r=0
- [ 3.680000] EXT4-fs (nande): barriers disabled
- [ 3.690000] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
- [ 3.700000] init: command 'exec' r=0
- [ 3.710000] EXT4-fs (nandh): barriers disabled
- [ 3.720000] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 3.730000] init: command 'mount' r=0
- [ 3.730000] init: command 'setupfs' r=0
- [ 3.730000] init: do_umount: /cache
- [ 3.750000] init: command 'umount' r=0
- [ 3.760000] init: command 'exec' r=0
- [ 3.780000] EXT4-fs (nandh): barriers disabled
- [ 3.790000] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
- [ 3.800000] init: command 'exec' r=0
- [ 3.800000] init: dont need format /dev/block/nandi
- [ 3.810000] init: command 'format_userdata' r=1
- [ 3.810000] init: processing action 0x3970a0 (post-fs)
- [ 3.820000] init: command 'chown' r=0
- [ 3.820000] init: command 'chmod' r=0
- [ 3.820000] init: command 'chown' r=-2
- [ 3.830000] init: command 'chmod' r=-2
- [ 3.830000] init: command 'chown' r=0
- [ 3.840000] init: command 'chmod' r=0
- [ 3.840000] init: command 'chown' r=0
- [ 3.840000] init: command 'chmod' r=0
- [ 3.850000] init: command 'chown' r=0
- [ 3.850000] init: command 'chmod' r=0
- [ 3.850000] init: command 'mkdir' r=0
- [ 3.860000] init: processing action 0x397290 (post-fs-data)
- [ 3.860000] init: command 'chown' r=0
- [ 3.870000] init: command 'chmod' r=0
- [ 3.880000] init: command 'mkdir' r=0
- [ 3.880000] init: command 'copy' r=-1
- [ 3.890000] init: command 'chown' r=-2
- [ 3.890000] init: command 'chmod' r=-2
- [ 3.900000] init: command 'copy' r=-1
- [ 3.900000] init: command 'chown' r=-2
- [ 3.900000] init: command 'chmod' r=-2
- [ 3.910000] init: command 'write' r=-2
- [ 3.920000] init: command 'mkdir' r=0
- [ 3.930000] init: command 'mkdir' r=0
- [ 3.930000] init: command 'mkdir' r=0
- [ 3.930000] init: command 'mkdir' r=0
- [ 3.940000] init: command 'mkdir' r=0
- [ 3.940000] init: command 'mkdir' r=0
- [ 3.940000] init: command 'mkdir' r=0
- [ 3.950000] init: command 'mkdir' r=0
- [ 3.950000] init: command 'mkdir' r=0
- [ 3.960000] init: command 'chmod' r=0
- [ 3.960000] init: command 'mkdir' r=0
- [ 3.960000] init: command 'chown' r=0
- [ 3.970000] init: command 'mkdir' r=0
- [ 3.970000] init: command 'chmod' r=0
- [ 3.970000] init: command 'chmod' r=0
- [ 3.980000] init: command 'chmod' r=0
- [ 3.980000] init: command 'chmod' r=0
- [ 3.990000] init: command 'chmod' r=0
- [ 4.000000] init: command 'mkdir' r=0
- [ 4.000000] init: command 'mkdir' r=0
- [ 4.020000] init: command 'mkdir' r=0
- [ 4.030000] init: command 'mkdir' r=0
- [ 4.040000] init: command 'mkdir' r=0
- [ 4.050000] init: command 'mkdir' r=0
- [ 4.060000] init: command 'mkdir' r=0
- [ 4.060000] init: command 'mkdir' r=0
- [ 4.060000] init: command 'mkdir' r=0
- [ 4.070000] init: command 'chown' r=0
- [ 4.070000] init: command 'chmod' r=0
- [ 4.080000] init: command 'mkdir' r=0
- [ 4.080000] init: command 'mkdir' r=0
- [ 4.080000] init: command 'chown' r=0
- [ 4.090000] init: command 'chmod' r=0
- [ 4.090000] init: command 'chown' r=0
- [ 4.090000] init: command 'chmod' r=0
- [ 4.100000] init: processing action 0x39cdf8 (property_service_init)
- [ 4.110000] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
- [ 4.120000] init: command 'property_service_init' r=0
- [ 4.120000] init: processing action 0x39ce40 (signal_init)
- [ 4.130000] init: command 'signal_init' r=0
- [ 4.130000] init: processing action 0x39ce88 (check_startup)
- [ 4.140000] init: command 'check_startup' r=0
- [ 4.140000] init: processing action 0x397a80 (boot)
- [ 4.150000] init: command 'chown' r=0
- [ 4.150000] init: command 'chmod' r=0
- [ 4.160000] init: command 'ifup' r=0
- [ 4.160000] init: command 'hostname' r=0
- [ 4.160000] init: command 'domainname' r=0
- [ 4.170000] init: command 'setrlimit' r=0
- [ 4.170000] init: command 'write' r=0
- [ 4.180000] init: command 'write' r=0
- [ 4.180000] init: command 'chown' r=0
- [ 4.180000] init: command 'chmod' r=0
- [ 4.190000] init: command 'chown' r=0
- [ 4.190000] init: command 'chmod' r=0
- [ 4.200000] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- [ 4.200000] init: command 'write' r=0
- [ 4.210000] init: command 'write' r=0
- [ 4.210000] init: command 'write' r=0
- [ 4.220000] init: command 'chown' r=-2
- [ 4.220000] init: command 'chown' r=-2
- [ 4.220000] init: command 'chown' r=-2
- [ 4.230000] init: command 'chown' r=-2
- [ 4.230000] init: command 'chown' r=-2
- [ 4.230000] init: command 'chown' r=0
- [ 4.240000] init: command 'chown' r=0
- [ 4.240000] init: command 'chown' r=0
- [ 4.240000] init: command 'chmod' r=0
- [ 4.250000] init: command 'chmod' r=0
- [ 4.250000] init: command 'chmod' r=0
- [ 4.260000] init: command 'chown' r=0
- [ 4.260000] init: command 'chmod' r=0
- [ 4.260000] init: command 'chown' r=-2
- [ 4.270000] init: command 'chown' r=-2
- [ 4.270000] init: command 'chown' r=-2
- [ 4.270000] init: command 'chown' r=-2
- [ 4.280000] init: command 'chown' r=-2
- [ 4.280000] init: command 'chown' r=-2
- [ 4.290000] init: command 'chown' r=-2
- [ 4.290000] init: command 'chown' r=-2
- [ 4.290000] init: command 'chown' r=-2
- [ 4.300000] init: command 'chown' r=-2
- [ 4.300000] init: command 'chown' r=-2
- [ 4.300000] init: command 'chown' r=-2
- [ 4.310000] init: command 'chown' r=-2
- [ 4.310000] init: command 'chown' r=-2
- [ 4.320000] init: command 'chown' r=-2
- [ 4.320000] init: command 'chown' r=-2
- [ 4.320000] init: command 'chown' r=-2
- [ 4.330000] init: command 'chown' r=-2
- [ 4.330000] init: command 'chown' r=-2
- [ 4.340000] init: command 'chown' r=0
- [ 4.340000] init: command 'chown' r=0
- [ 4.340000] init: command 'chown' r=0
- [ 4.350000] init: command 'chown' r=0
- [ 4.350000] init: command 'chown' r=0
- [ 4.350000] init: command 'chown' r=0
- [ 4.360000] init: command 'chown' r=0
- [ 4.360000] init: command 'setprop' r=0
- [ 4.370000] init: command 'setprop' r=0
- [ 4.370000] init: command 'setprop' r=0
- [ 4.370000] init: command 'setprop' r=0
- [ 4.380000] init: command 'setprop' r=0
- [ 4.380000] init: command 'setprop' r=0
- [ 4.380000] init: command 'setprop' r=0
- [ 4.390000] init: command 'setprop' r=0
- [ 4.390000] init: command 'setprop' r=0
- [ 4.400000] init: starting 'console'
- [ 4.400000] init: starting 'servicemanager'
- [ 4.400000] init: starting 'vold'
- [ 4.410000] init: command 'class_start' r=0
- [ 4.420000] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
- [ 4.430000] init: starting 'netd'
- [ 4.430000] init: starting 'debuggerd'
- [ 4.440000] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
- [ 4.440000] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
- [ 4.450000] init: starting 'surfaceflinger'
- [ 4.460000] init: starting 'zygote'
- [ 4.470000] init: starting 'drm'
- [ 4.470000] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
- [ 4.480000] init: starting 'media'
- [ 4.480000] init: starting 'dbus'
- [ 4.490000] init: starting 'installd'
- [ 4.500000] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
- [ 4.510000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- [ 4.520000] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
- [ 4.530000] init: starting 'keystore'
- [ 4.530000] init: starting 'u3gmonitor'
- [ 4.540000] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
- [ 4.550000] init: starting 'ril-daemon'
- [ 4.550000] init: command 'class_start' r=0
- [ 4.560000] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
- [ 4.570000] init: processing action 0x39c930 (boot)
- [ 4.570000] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
- [ 4.630000] input: sun4i-keyboard as /devices/virtual/input/input1
- [ 4.640000] ==register_early_suspend =
- [ 4.640000] init: command 'insmod' r=0
- [ 4.700000] ===========================goodix_ts_init=====================
- [ 4.720000] ctp_fetch_sysconfig_para.
- [ 4.720000] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x5d, dirty_addr_buf: 0x5d. dirty_addr_buf[1]: 0xfffe
- [ 4.740000] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
- [ 4.740000] ctp_fetch_sysconfig_para: screen_max_x = 800.
- [ 4.750000] ctp_fetch_sysconfig_para: screen_max_y = 480.
- [ 4.750000] ctp_fetch_sysconfig_para: revert_x_flag = 0.
- [ 4.760000] ctp_fetch_sysconfig_para: revert_y_flag = 0.
- [ 4.770000] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
- [ 4.770000] goodix_ts_init: after fetch_sysconfig_para: normal_i2c: 0x5d. normal_i2c[1]: 0xfffe
- [ 4.780000] script parser fetch err.
- [ 4.780000] ctp_init_platform_resource: tp_reset request gpio fail!
- [ 4.790000] ctp_detect: Detected chip Goodix-TS at adapter 1, address 0x5d
- [ 4.800000] Goodix-TS 1-005d: Install gt811 driver.
- [ 4.800000] Goodix-TS 1-005d: Driver Release Date:2012-02-08
- [ 4.810000] ======goodix_gt811 probe======
- [ 4.940000] ctp_set_irq_mode: config gpio to int mode.
- [ 4.940000] ctp_set_irq_mode, 231: gpio_int_info, port = 7, port_num = 11.
- [ 4.950000] INTERRUPT CONFIG
- [ 4.960000] Goodix-TS 1-005d: GT811 init info:X_MAX=4096,Y_MAX=4096,TRIG_MODE=RISING EDGE
- [ 4.980000] input: gt80x as /devices/virtual/input/input2
- [ 5.190000] Goodix-TS 1-005d: GT811 Verion:0x2010
- [ 5.190000] Goodix-TS 1-005d: Start gt80x in interrupt mode,Driver Modify Date:2012-01-05
- [ 5.200000] init: command 'insmod' r=0
- [ 5.220000] ===========================hv_keypad_init=====================
- [ 5.230000] ========HV Inital ===================
- [ 5.230000] tkey_fetch_sysconfig_para: tkey_unused.
- [ 5.240000] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
- [ 5.240000] i2c i2c-0: Invalid probe address 0x00
- [ 5.250000] i2c i2c-1: Invalid probe address 0x00
- [ 5.250000] i2c i2c-2: Invalid probe address 0x00
- [ 5.260000] init: command 'insmod' r=0
- [ 5.330000] UMP: UMP device driver loaded
- [ 5.340000] init: command 'insmod' r=0
- [ 5.530000] Mali: mali--2244-rel0!
- [ 5.560000] Mali: Mali device driver r2p4-02rel0 loaded
- [ 5.570000] init: command 'insmod' r=0
- [ 5.610000] cedarx: module is already loaded
- [ 5.620000] init: command 'insmod' r=-1
- [ 5.640000] dmard06: init
- [ 5.640000] ========gsensor_fetch_sysconfig_para===================
- [ 5.650000] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x1c, dirty_addr_buf: 0x1c. dirty_addr_buf[1]: 0xfffe
- [ 5.660000] gsensor_fetch_sysconfig_para: twi_id is 1.
- [ 5.670000] err: gpio count < =0 ,gpio_count is: 0
- [ 5.670000] dmard06_init: after fetch_sysconfig_para: normal_i2c: 0x1c. normal_i2c[1]: 0xfffe
- [ 5.680000] gsensor_detect: Detected chip dmard06 at adapter 1, address 0x1c
- [ 5.690000] i2c Read SW_RESET = 2
- [ 5.690000] i2c Read WHO_AM_I = 6
- [ 5.700000] dmard06 gsensor registered I2C driver!
- [ 5.700000] input: dmard06 as /devices/virtual/input/input3
- [ 5.710000] dmard06 probe ok
- [ 5.710000] init: command 'insmod' r=0
- [ 5.750000] hello, sun4i_vibrator init
- [ 5.750000] sun4i_vibrator_init: motor_unused.
- [ 5.800000] =========script_parser_fetch_err============
- [ 5.810000] init: command 'insmod' r=-1
- [ 5.810000] init: command 'chmod' r=-2
- [ 5.830000] init: command 'insmod' r=0
- [ 5.860000] init: command 'insmod' r=0
- [ 5.950000] init: command 'insmod' r=0
- [ 5.990000] [CSI]Welcome to CSI driver
- [ 5.990000] [CSI]csi_init
- [ 6.050000] [CSI]registered sub device,input_num = 0
- [ 6.050000] [CSI]power on and power off camera!
- [ 6.370000] [CSI]V4L2 device registered as video0
- [ 6.370000] init: command 'insmod' r=0
- [ 6.430000] init: command 'insmod' r=0
- [ 6.470000] usbcore: registered new interface driver asix
- [ 6.470000] init: command 'insmod' r=0
- [ 6.510000] usbcore: registered new interface driver qf9700
- [ 6.510000] init: command 'insmod' r=0
- [ 6.550000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 6.560000] init: command 'insmod' r=0
- [ 6.590000] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
- [ 6.600000] usbcore: registered new interface driver rtl8150
- [ 6.610000] init: command 'insmod' r=0
- [ 6.610000] init: processing action 0x39ced0 (queue_propety_triggers)
- [ 6.620000] init: command 'queue_propety_triggers' r=0
- [ 6.620000] init: processing action 0x3984b0 (nonencrypted)
- [ 6.630000] init: command 'class_start' r=0
- [ 6.630000] init: processing action 0x398bd8 (property:persist.sys.usb.config=*)
- [ 6.640000] init: command 'setprop' r=0
- [ 6.650000] init: processing action 0x398da8 (property:ro.debuggable=1)
- [ 6.650000] init: command 'start' r=0
- [ 6.660000] init: processing action 0x39bf90 (property:sys.usb.config=mass_storage,adb)
- [ 6.660000] android_usb: already disabled
- [ 6.670000] init: command 'write' r=0
- [ 6.670000] init: command 'write' r=0
- [ 6.680000] init: command 'write' r=0
- [ 6.680000] init: command 'write' r=0
- [ 6.680000] ep_matches, wrn: endpoint already claimed, ep(0xc0826b90, 0xdf037600, ep1-bulk)
- [ 6.690000] adb_bind_config
- [ 6.700000] ep_matches, wrn: endpoint already claimed, ep(0xc0826b90, 0xdf037600, ep1-bulk)
- [ 6.700000] ep_matches, wrn: endpoint already claimed, ep(0xc0826bd0, 0xdf037600, ep2-bulk)
- [ 6.710000] ep_matches, wrn: endpoint already claimed, ep(0xc0826b90, 0xdf037600, ep1-bulk)
- [ 6.720000] ep_matches, wrn: endpoint already claimed, ep(0xc0826bd0, 0xdf037600, ep2-bulk)
- [ 6.730000] ep_matches, wrn: endpoint already claimed, ep(0xc0826c10, 0xdf032200, ep3-bulk)
- [ 6.740000] [sw_udc]: alloc request: ep(0xc0826c50, ep4-bulk, 512), req(0xdf2fc6c0)
- [ 6.750000] [sw_udc]: alloc request: ep(0xc0826c10, ep3-bulk, 512), req(0xdf2fc700)
- [ 6.760000] [sw_udc]: alloc request: ep(0xc0826c10, ep3-bulk, 512), req(0xdf2fc740)
- [ 6.760000] [sw_udc]: alloc request: ep(0xc0826c10, ep3-bulk, 512), req(0xdf2fc780)
- [ 6.770000] [sw_udc]: alloc request: ep(0xc0826c10, ep3-bulk, 512), req(0xdf2fc7c0)
- [ 6.780000] [sw_udc]: sw_udc_pullup, is_on = 1
- [ 6.790000] WRN:L2729(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 6.790000] init: command 'write' r=0
- [ 6.800000] init: starting 'adbd'
- [ 6.800000] init: command 'start' r=0
- [ 6.810000] adb_open
- [ 6.810000] init: command 'setprop' r=0
- [ 6.980000] init: starting 'bootanim'
- [ 15.920000] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- [ 27.160000] request_suspend_state: wakeup (3->0) at 27169857378 (2012-08-24 12:09:16.592749473 UTC)
- [ 30.450000] acc_open
- [ 30.450000] acc_release
- [ 32.150000] sw_usb_enable_hcd: usbc_num = 1
- [ 32.150000] [sw-ehci1]: sw_usb_enable_ehci
- [ 32.170000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc08edd9c
- [ 32.180000] [sw-ehci1]: open clock
- [ 32.200000] usb_passby en=1,passly=0
- [ 32.210000] hci_port_configure en=1,config_cnt=0
- [ 32.220000] [sw-ehci1]: Set USB Power ON
- [ 32.220000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 32.260000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
- [ 32.260000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
- [ 32.330000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
- [ 32.330000] ehci_irq: port change detect
- [ 32.340000] hub 2-0:1.0: USB hub found
- [ 32.340000] hub 2-0:1.0: 1 port detected
- [ 32.350000] [sw-ohci1]: sw_usb_enable_ohci
- [ 32.350000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc08edeb0
- [ 32.360000] [sw-ohci1]: open clock
- [ 32.390000] hci_port_configure en=1,config_cnt=1
- [ 32.400000] usb_passby en=1,passly=1
- [ 32.400000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 32.410000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
- [ 32.410000] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
- [ 32.480000] hub 3-0:1.0: USB hub found
- [ 32.480000] hub 3-0:1.0: 1 port detected
- [ 32.490000]
- [ 32.490000] rtw driver version=v3.3.2_3192.20120103
- [ 32.500000] ##########rtw_suspend_lock_init ###########
- [ 32.510000] usbcore: registered new interface driver rtl8192cu
- [ 32.670000] usb 2-1: new high speed USB device number 2 using sw-ehci
- [ 32.820000] register rtw_netdev_ops to netdev_ops
- [ 32.820000] CHIP TYPE: RTL8188C_8192C
- [ 32.830000]
- [ 32.830000] usb_endpoint_descriptor(0):
- [ 32.840000] bLength=7
- [ 32.840000] bDescriptorType=5
- [ 32.850000] bEndpointAddress=81
- [ 32.850000] wMaxPacketSize=200
- [ 32.850000] bInterval=0
- [ 32.850000] RT_usb_endpoint_is_bulk_in = 1
- [ 32.860000]
- [ 32.860000] usb_endpoint_descriptor(1):
- [ 32.860000] bLength=7
- [ 32.870000] bDescriptorType=5
- [ 32.870000] bEndpointAddress=2
- [ 32.870000] wMaxPacketSize=200
- [ 32.880000] bInterval=0
- [ 32.880000] RT_usb_endpoint_is_bulk_out = 2
- [ 32.880000]
- [ 32.880000] usb_endpoint_descriptor(2):
- [ 32.890000] bLength=7
- [ 32.890000] bDescriptorType=5
- [ 32.900000] bEndpointAddress=3
- [ 32.900000] wMaxPacketSize=200
- [ 32.900000] bInterval=0
- [ 32.910000] RT_usb_endpoint_is_bulk_out = 3
- [ 32.910000]
- [ 32.910000] usb_endpoint_descriptor(3):
- [ 32.920000] bLength=7
- [ 32.920000] bDescriptorType=5
- [ 32.920000] bEndpointAddress=84
- [ 32.930000] wMaxPacketSize=40
- [ 32.930000] bInterval=1
- [ 32.930000] RT_usb_endpoint_is_int_in = 4, Interval = 1
- [ 32.940000] nr_endpoint=4, in_num=2, out_num=2
- [ 32.940000]
- [ 32.940000] USB_SPEED_HIGH
- [ 32.950000] Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.
- [ 32.950000] RF_Type is 3!!
- [ 32.960000] EEPROM type is E-FUSE
- [ 32.960000] ====> ReadAdapterInfo8192C
- [ 32.960000] Boot from EFUSE, Autoload OK !
- [ 33.120000] EEPROMVID = 0x0bda
- [ 33.120000] EEPROMPID = 0x8176
- [ 33.120000] EEPROMCustomerID : 0x00
- [ 33.130000] EEPROMSubCustomerID: 0x00
- [ 33.130000] RT_CustomerID: 0x00
- [ 33.130000] _ReadMACAddress MAC Address from EFUSE = 00:ed:24:0f:6e:ea
- [ 33.140000] EEPROMRegulatory = 0x0
- [ 33.150000] _ReadBoardType(0)
- [ 33.150000] BT Coexistance = disable
- [ 33.150000] RT_ChannelPlan: 0x0a
- [ 33.160000] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
- [ 33.170000] ### PS params=> power_mgnt(1),usbss_enable(0) ###
- [ 33.170000] ### AntDivCfg(0)
- [ 33.180000] readAdapterInfo_8192CU(): REPLACEMENT = 1
- [ 33.180000] <==== ReadAdapterInfo8192C in 220 ms
- [ 33.190000] rtw_register_early_suspend
- [ 33.190000] rtw_macaddr_cfg MAC Address = 00:ed:24:0f:6e:ea
- [ 33.200000] MAC Address from pnetdev->dev_addr= 00:ed:24:0f:6e:ea
- [ 33.210000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
- [ 35.220000] init: starting 'wpa_supplicant'
- [ 35.230000] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
- [ 35.750000] +871x_drv - drv_open, bup=0
- [ 35.780000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
- [ 35.790000] FirmwareDownload92C accquire FW from embedded image
- [ 35.790000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 35.890000] fw download ok!
- [ 35.890000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 36.460000] IQK:Start!!!
- [ 36.560000] Path A IQK Success!!
- [ 36.620000] Path A IQK Success!!
- [ 36.640000] IQK: final_candidate is 0
- [ 36.640000] IQK: RegE94=106 RegE9C=c RegEA4=f8 RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 36.640000] Path A IQ Calibration Success !
- [ 36.770000] pdmpriv->TxPowerTrackControl = 1
- [ 36.780000] MAC Address from REG_MACID = 00:ed:24:0f:6e:ea
- [ 36.830000] rtl8192cu_hal_init in 1060ms
- [ 36.830000] MAC Address = 00:ed:24:0f:6e:ea
- [ 36.870000] -871x_drv - drv_open, bup=1
- [ 36.870000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 36.940000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 36.940000] set_mode = IW_MODE_INFRA
- [ 36.960000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 37.750000] init: waitpid returned pid 210, status = 00000000
- [ 37.760000] init: untracked pid 210 exited
- [ 38.430000] survey done event(3)
- [ 38.430000] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 38.450000] set_mode = IW_MODE_INFRA
- [ 38.460000] =>rtw_wx_set_essid
- [ 38.460000] ssid=l12.grain, len=9
- [ 38.470000] Set SSID under fw_state=0x00000008
- [ 38.470000] [by_bssid:0][assoc_ssid:l12.grain][to_roaming:0] new candidate: l12.grain(00:21:91:87:60:0c) rssi:-83
- [ 38.480000] rtw_select_and_join_from_scanned_queue: candidate: l12.grain(00:21:91:87:60:0c)
- [ 38.490000] link to new AP
- [ 38.490000] <=rtw_wx_set_essid, ret 0
- [ 38.500000] Set BSSID under fw_state=0x00000088
- [ 39.200000] link to new AP
- [ 39.210000] OnAuthClient
- [ 39.220000] network.SupportedRates[0]=82
- [ 39.220000] network.SupportedRates[1]=84
- [ 39.220000] network.SupportedRates[2]=8B
- [ 39.230000] network.SupportedRates[3]=96
- [ 39.230000] network.SupportedRates[4]=0C
- [ 39.230000] network.SupportedRates[5]=18
- [ 39.240000] network.SupportedRates[6]=30
- [ 39.240000] network.SupportedRates[7]=48
- [ 39.250000] network.SupportedRates[8]=12
- [ 39.250000] network.SupportedRates[9]=24
- [ 39.250000] network.SupportedRates[10]=60
- [ 39.260000] network.SupportedRates[11]=6C
- [ 39.260000] bssrate_len = 12
- [ 39.270000] OnAuthClient
- [ 39.270000] OnAssocRsp
- [ 39.270000] report_join_res(1)
- [ 39.270000] rtw_joinbss_update_network
- [ 39.280000] rtw_joinbss_update_stainfo
- [ 39.280000] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
- [ 39.290000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 39.420000] WMM(0): 0, a42b
- [ 39.420000] WMM(1): 0, a44f
- [ 39.420000] WMM(2): 0, 5e4322
- [ 39.430000] init: starting 'dhcpcd_wlan0'
- [ 39.520000] WMM(3): 0, 2f3222
- [ 39.520000] [HW_VAR_ACM_CTRL] Write 0x0
- [ 39.530000] HTOnAssocRsp
- [ 39.560000] update raid entry, mask=0x40000fff, arg=0x80
- [ 39.680000] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
- [ 39.690000] SetFwRsvdPagePkt
- [ 39.690000] Set RSVD page location to Fw.
- [ 39.690000] =>mlmeext_joinbss_event_callback
- [ 40.870000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 44.740000] survey done event(1)
- [ 47.730000] init: processing action 0x39a400 (property:sys.boot_completed=1)
- [ 47.760000] init: starting 'preinstall'
- [ 47.760000] init: command 'start' r=0
- [ 47.890000] init: service 'bootanim' is being killed
- [ 47.900000] init: waitpid returned pid 126, status = 00000009
- [ 47.910000] init: process 'bootanim', pid 126 exited
- [ 48.000000] init: waitpid returned pid 534, status = 00000000
- [ 48.040000] init: process 'preinstall', pid 534 exited
- [ 48.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 48.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 49.750000] wlan0: no IPv6 routers present
- [ 56.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 56.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 60.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 60.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 62.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 62.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 64.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 64.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 68.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 68.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 72.000000] battery vol change: 57->56
- [ 72.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 72.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 82.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 82.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 84.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 84.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 90.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 90.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 92.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 92.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 94.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 94.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 98.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 98.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 100.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 100.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 104.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 104.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 112.110000] battery vol change: 56->55
- [ 124.410000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 124.430000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 126.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 126.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 152.180000] battery vol change: 55->54
- [ 152.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 152.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 154.870000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 154.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 192.260000] battery vol change: 54->53
- [ 212.870000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 212.870000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement