SHARE
TWEET

calculate_solid_layer_cura_plugin_slicing_profile

a guest Jan 6th, 2017 73 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [simon@bPi ~]$ cat .octoprint/slicingProfiles/cura/MSP_04Noz_02LH_50mmS_ABS.profile
  2. _description: MSP w/0.4mm noz, 0.2mm layers, 50 mm/s
  3. _display_name: MSP w/0.4mm noz, 0.2 LH, 50 mm/s
  4. bottom_layer_speed: 20
  5. bottom_thickness: 0.18
  6. brim_line_count: 20
  7. cool_head_lift: false
  8. cool_min_feedrate: 10
  9. cool_min_layer_time: 5
  10. fan_enabled: false
  11. fan_full_height: 0.5
  12. fan_speed: 100
  13. fan_speed_max: 100
  14. filament_diameter:
  15. - 1.73
  16. - false
  17. - false
  18. - false
  19. filament_flow: 103
  20. fill_density: 101
  21. fill_overlap: 15
  22. first_layer_width_factor: 101
  23. fix_horrible_extensive_stitching: false
  24. fix_horrible_union_all_type_a: true
  25. fix_horrible_union_all_type_b: false
  26. fix_horrible_use_open_bits: false
  27. follow_surface: false
  28. infill_speed: 50
  29. perimeter_before_infill: true
  30. inner_shell_speed: 30
  31. layer_height: 0.2
  32. object_sink: 0.0
  33. ooze_shield: false
  34. outer_shell_speed: 15
  35. overlap_dual: 0.15
  36. platform_adhesion: none
  37. print_bed_temperature: 100
  38. print_speed: 50
  39. print_temperature:
  40. - 215
  41. - false
  42. - false
  43. - false
  44. raft_airgap: 0.22
  45. raft_base_linewidth: 1.0
  46. raft_base_thickness: 0.3
  47. raft_interface_linewidth: 0.4
  48. raft_interface_thickness: 0.27
  49. raft_line_spacing: 3.0
  50. raft_margin: 5.0
  51. raft_surface_layers: 2
  52. retraction_amount: 1
  53. retraction_combing: all
  54. retraction_dual_amount: 16.5
  55. retraction_enable: true
  56. retraction_hop: 0.075
  57. retraction_min_travel: 1.5
  58. retraction_minimal_extrusion: 0.02
  59. retraction_speed: 40.0
  60. skirt_gap: 3.0
  61. skirt_line_count: true
  62. skirt_minimal_length: 200.0
  63. solid_bottom: true
  64. solid_layer_thickness: 0.4
  65. solid_top: true
  66. spiralize: false
  67. start_gcode:
  68. - ';Sliced at: {day} {date} {time}
  69.   ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  70.   ;Print time: {print_time}
  71.   ;Filament used: {filament_amount}m {filament_weight}g
  72.   ;Filament cost: {filament_cost}
  73.   M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  74.   ;M109 S{print_temperature} ;Uncomment to add your own temperature line
  75.   G21        ;metric values
  76.   G90        ;absolute positioning
  77.   M82        ;set extruder to absolute mode
  78.   M107       ;start with the fan off
  79.   G28 X0 Y0  ;move X/Y to min endstops
  80.   G28 Z0     ;move Z to min endstops
  81.   G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  82.   G92 E0                  ;zero the extruded length
  83.   G1 F200 E3              ;extrude 3mm of feed stock
  84.   G92 E0                  ;zero the extruded length again
  85.   G1 F{travel_speed}
  86.   ;Put printing message on LCD screen
  87.   M117 Printing...'
  88. end_gcode:
  89. - ';End GCode
  90.   M104 S0                     ;extruder heater off
  91.   M140 S0                     ;heated bed heater off (if you have it)
  92.   G91                                    ;relative positioning
  93.   G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
  94.   G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
  95.   G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
  96.   M84                         ;steppers off
  97.   G90                         ;absolute positioning
  98.   ;{profile_string}'
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top