Public Pastes
SHARE
TWEET

Untitled

a guest Feb 21st, 2017 62 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [manjaro@manjaro ~]$ sudo smartctl -a /dev/sda
  2. smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.13-1-MANJARO] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family:     Toshiba 2.5" HDD MK..65GSX
  7. Device Model:     TOSHIBA MK6465GSX
  8. Serial Number:    11UVT3F3T
  9. LU WWN Device Id: 5 000039 301f04768
  10. Firmware Version: GJ002J
  11. User Capacity:    640.135.028.736 bytes [640 GB]
  12. Sector Size:      512 bytes logical/physical
  13. Rotation Rate:    5400 rpm
  14. Form Factor:      2.5 inches
  15. Device is:        In smartctl database [for details use: -P show]
  16. ATA Version is:   ATA8-ACS (minor revision not indicated)
  17. SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
  18. Local Time is:    Tue Feb 21 13:09:57 2017 UTC
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status:  (0x00) Offline data collection activity
  27.                                         was never started.
  28.                                         Auto Offline Data Collection: Disabled.
  29. Self-test execution status:      (   0) The previous self-test routine completed
  30.                                         without error or no self-test has ever
  31.                                         been run.
  32. Total time to complete Offline
  33. data collection:                (  120) seconds.
  34. Offline data collection
  35. capabilities:                    (0x5b) SMART execute Offline immediate.
  36.                                         Auto Offline data collection on/off support.
  37.                                         Suspend Offline collection upon new
  38.                                         command.
  39.                                         Offline surface scan supported.
  40.                                         Self-test supported.
  41.                                         No Conveyance Self-test supported.
  42.                                         Selective Self-test supported.
  43. SMART capabilities:            (0x0003) Saves SMART data before entering
  44.                                         power-saving mode.
  45.                                         Supports SMART auto save timer.
  46. Error logging capability:        (0x01) Error logging supported.
  47.                                         General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time:        (   2) minutes.
  50. Extended self-test routine
  51. recommended polling time:        ( 193) minutes.
  52. SCT capabilities:              (0x003d) SCT Status supported.
  53.                                         SCT Error Recovery Control supported.
  54.                                         SCT Feature Control supported.
  55.                                         SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  60.   1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  61.   2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  62.   3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       2085
  63.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       6796
  64.   5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       25
  65.   7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  66.   8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  67.   9 Power_On_Hours          0x0032   070   070   000    Old_age   Always       -       12068
  68.  10 Spin_Retry_Count        0x0033   235   100   030    Pre-fail  Always       -       0
  69.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       3941
  70. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       310
  71. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       345
  72. 193 Load_Cycle_Count        0x0032   097   097   000    Old_age   Always       -       31903
  73. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       34 (Min/Max 7/54)
  74. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       8
  75. 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
  76. 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
  77. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  78. 220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       8249
  79. 222 Loaded_Hours            0x0032   072   072   000    Old_age   Always       -       11442
  80. 223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
  81. 224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
  82. 226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       329
  83. 240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 65535 (device log contains only the most recent five errors)
  87.         CR = Command Register [HEX]
  88.         FR = Features Register [HEX]
  89.         SC = Sector Count Register [HEX]
  90.         SN = Sector Number Register [HEX]
  91.         CL = Cylinder Low Register [HEX]
  92.         CH = Cylinder High Register [HEX]
  93.         DH = Device/Head Register [HEX]
  94.         DC = Device Command Register [HEX]
  95.         ER = Error register [HEX]
  96.         ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 65535 occurred at disk power-on lifetime: 3295 hours (137 days + 7 hours)
  102.   When the command that caused the error occurred, the device was active or idle.
  103.  
  104.   After command completion occurred, registers were:
  105.   ER ST SC SN CL CH DH
  106.   -- -- -- -- -- -- --
  107.   40 41 2a 07 fc b6 63  Error: UNC at LBA = 0x03b6fc07 = 62323719
  108.  
  109.   Commands leading to the command that caused the error were:
  110.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  111.   -- -- -- -- -- -- -- --  ----------------  --------------------
  112.   60 20 98 50 16 1f 40 00      00:08:18.261  READ FPDMA QUEUED
  113.   60 20 90 30 16 1f 40 00      00:08:18.261  READ FPDMA QUEUED
  114.   60 20 88 10 16 1f 40 00      00:08:18.260  READ FPDMA QUEUED
  115.   60 20 80 f0 15 1f 40 00      00:08:18.260  READ FPDMA QUEUED
  116.   60 20 78 d0 15 1f 40 00      00:08:18.259  READ FPDMA QUEUED
  117.  
  118. Error 65534 occurred at disk power-on lifetime: 11843 hours (493 days + 11 hours)
  119.   When the command that caused the error occurred, the device was active or idle.
  120.  
  121.   After command completion occurred, registers were:
  122.   ER ST SC SN CL CH DH
  123.   -- -- -- -- -- -- --
  124.   40 41 ba 21 51 01 68  Error: UNC at LBA = 0x08015121 = 134304033
  125.  
  126.   Commands leading to the command that caused the error were:
  127.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  128.   -- -- -- -- -- -- -- --  ----------------  --------------------
  129.   60 00 b8 08 51 01 40 00      01:29:22.258  READ FPDMA QUEUED
  130.   60 00 b0 08 50 01 40 00      01:29:22.256  READ FPDMA QUEUED
  131.   60 00 a8 08 4f 01 40 00      01:29:22.253  READ FPDMA QUEUED
  132.   60 00 a0 08 4e 01 40 00      01:29:22.251  READ FPDMA QUEUED
  133.   60 00 98 08 4d 01 40 00      01:29:22.225  READ FPDMA QUEUED
  134.  
  135. Error 65533 occurred at disk power-on lifetime: 11843 hours (493 days + 11 hours)
  136.   When the command that caused the error occurred, the device was active or idle.
  137.  
  138.   After command completion occurred, registers were:
  139.   ER ST SC SN CL CH DH
  140.   -- -- -- -- -- -- --
  141.   40 41 f2 5f 0c fb 67  Error: UNC at LBA = 0x07fb0c5f = 133893215
  142.  
  143.   Commands leading to the command that caused the error were:
  144.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  145.   -- -- -- -- -- -- -- --  ----------------  --------------------
  146.   60 00 f0 08 0c fb 40 00      01:29:07.984  READ FPDMA QUEUED
  147.   60 00 e8 08 0b fb 40 00      01:29:07.980  READ FPDMA QUEUED
  148.   60 00 e0 08 0a fb 40 00      01:29:07.923  READ FPDMA QUEUED
  149.   60 00 d8 08 09 fb 40 00      01:29:07.923  READ FPDMA QUEUED
  150.   60 00 d0 08 08 fb 40 00      01:29:07.923  READ FPDMA QUEUED
  151.  
  152. Error 65532 occurred at disk power-on lifetime: 11843 hours (493 days + 11 hours)
  153.   When the command that caused the error occurred, the device was active or idle.
  154.  
  155.   After command completion occurred, registers were:
  156.   ER ST SC SN CL CH DH
  157.   -- -- -- -- -- -- --
  158.   40 41 a2 5f 0c fb 67  Error: UNC at LBA = 0x07fb0c5f = 133893215
  159.  
  160.   Commands leading to the command that caused the error were:
  161.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  162.   -- -- -- -- -- -- -- --  ----------------  --------------------
  163.   60 00 a0 08 06 fb 40 00      01:29:03.395  READ FPDMA QUEUED
  164.   60 00 98 08 05 fb 40 00      01:29:03.393  READ FPDMA QUEUED
  165.   60 00 90 08 04 fb 40 00      01:29:03.391  READ FPDMA QUEUED
  166.   60 00 88 08 03 fb 40 00      01:29:03.387  READ FPDMA QUEUED
  167.   60 00 80 08 02 fb 40 00      01:29:03.384  READ FPDMA QUEUED
  168.  
  169. Error 65531 occurred at disk power-on lifetime: 11843 hours (493 days + 11 hours)
  170.   When the command that caused the error occurred, the device was active or idle.
  171.  
  172.   After command completion occurred, registers were:
  173.   ER ST SC SN CL CH DH
  174.   -- -- -- -- -- -- --
  175.   40 41 f2 65 fb f4 67  Error: UNC at LBA = 0x07f4fb65 = 133495653
  176.  
  177.   Commands leading to the command that caused the error were:
  178.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  179.   -- -- -- -- -- -- -- --  ----------------  --------------------
  180.   60 00 00 08 fb f4 40 00      01:28:52.029  READ FPDMA QUEUED
  181.   60 00 f0 08 fa f4 40 00      01:28:52.026  READ FPDMA QUEUED
  182.   60 00 e8 08 f9 f4 40 00      01:28:52.022  READ FPDMA QUEUED
  183.   60 00 e0 08 f8 f4 40 00      01:28:51.947  READ FPDMA QUEUED
  184.   60 00 d8 08 f7 f4 40 00      01:28:51.947  READ FPDMA QUEUED
  185.  
  186. SMART Self-test log structure revision number 1
  187. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  188. # 1  Short offline       Completed without error       00%      7482         -
  189. # 2  Extended offline    Completed without error       00%      3890         -
  190. # 3  Short offline       Completed without error       00%      3888         -
  191.  
  192. SMART Selective self-test log data structure revision number 1
  193.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  194.     1        0        0  Not_testing
  195.     2        0        0  Not_testing
  196.     3        0        0  Not_testing
  197.     4        0        0  Not_testing
  198.     5        0        0  Not_testing
  199. Selective self-test flags (0x0):
  200.   After scanning selected spans, do NOT read-scan remainder of disk.
  201. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top