Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.230000]
- [ 0.230000] CPU Interface
- [ 0.230000] -------------
- [ 0.230000] SDRAM_CS0 ....base 00000000, size 128MB
- [ 0.230000] SDRAM_CS1 ....disable
- [ 0.230000] SDRAM_CS2 ....disable
- [ 0.230000] SDRAM_CS3 ....disable
- [ 0.230000] PEX0_MEM ....base e0000000, size 128MB
- [ 0.230000] PEX0_IO ....base f2000000, size 1MB
- [ 0.230000] PEX1_MEM ....no such
- [ 0.230000] PEX1_IO ....no such
- [ 0.230000] INTER_REGS ....base f1000000, size 1MB
- [ 0.230000] NFLASH_CS ....base fa000000, size 2MB
- [ 0.230000] SPI_CS ....base f4000000, size 16MB
- [ 0.230000] BOOT_ROM_CS ....no such
- [ 0.230000] DEV_BOOTCS ....no such
- [ 0.230000] CRYPT_ENG ....base f0000000, size 2MB
- [ 0.230000]
- [ 0.230000] Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)-- SHEEVA PLUG Soc: 88F6192 A1 LE
- [ 0.230000]
- [ 0.230000] Detected Tclk 166666667 and SysClk 200000000
- [ 0.230000] Marvell USB EHCI Host controller #0: c403e740
- [ 0.730000] PEX0 interface detected no Link.
- [ 0.740000] PCI: bus0: Fast back to back transfers enabled
- [ 0.740000] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
- [ 0.750000] bio: create slab <bio-0> at 0
- [ 0.750000] SCSI subsystem initialized
- [ 0.750000] usbcore: registered new interface driver usbfs
- [ 0.750000] usbcore: registered new interface driver hub
- [ 0.750000] usbcore: registered new device driver usb
- [ 0.750000] NET: Registered protocol family 2
- [ 0.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.750000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.750000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.750000] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.750000] TCP reno registered
- [ 0.750000] NET: Registered protocol family 1
- [ 0.750000] cpufreq: Init kirkwood cpufreq driver
- [ 0.760000] XOR registered 4 channels
- [ 0.760000] XOR 2nd invalidate WA enabled
- [ 0.760000] cesadev_init(c000d7fc)
- [ 0.760000] mvCesaInit: sessions=640, queue=64, pSram=f0000000
- [ 0.770000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.770000] msgmni has been set to 231
- [ 0.770000] alg: No test for cipher_null (cipher_null-generic)
- [ 0.770000] alg: No test for ecb(cipher_null) (ecb-cipher_null)
- [ 0.770000] alg: No test for digest_null (digest_null-generic)
- [ 0.770000] alg: No test for compress_null (compress_null-generic)
- [ 0.780000] alg: No test for stdrng (krng)
- [ 0.780000] alg: No test for hmac(digest_null) (hmac(digest_null-generic))
- [ 0.790000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.790000] io scheduler noop registered
- [ 0.790000] io scheduler anticipatory registered (default)
- [ 0.790000] Initializing ths8200_init
- [ 0.790000] Initializing dove_adi9889_init
- [ 0.810000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.810000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
- [ 0.810000] console [ttyS0] enabled
- [ 0.820000]
- [ 0.820000] Warning Sata is Powered Off
- [ 0.820000] Loading Marvell Ethernet Driver:
- [ 0.830000] o Cached descriptors in DRAM
- [ 0.830000] o DRAM SW cache-coherency
- [ 0.840000] o 1 Giga ports supported
- [ 0.840000] o Single RX Queue support - ETH_DEF_RXQ=0
- [ 0.840000] o Single TX Queue support - ETH_DEF_TXQ=0
- [ 0.850000] o TCP segmentation offload (TSO) supported
- [ 0.860000] o Large Receive offload (LRO) supported
- [ 0.860000] o Receive checksum offload supported
- [ 0.860000] o Transmit checksum offload supported
- [ 0.870000] o Network Fast Processing (Routing) supported - (Disabled)
- [ 0.880000] o Driver ERROR statistics enabled
- [ 0.880000] o Proc tool API enabled
- [ 0.880000] o SKB Reuse supported - (Disabled)
- [ 0.890000] o SKB Recycle supported - (Disabled)
- [ 0.890000] o Rx descripors: q0=128
- [ 0.900000] o Tx descripors: q0=532
- [ 0.900000] o Loading network interface(s):
- [ 0.910000] o register under mv88fx_eth platform
- [ 0.910000] o eth0, ifindex = 2, GbE port = 0
- [ 0.920000]
- [ 0.920000] mvFpRuleDb (c432a000): 1024 entries, 4096 bytes
- [ 0.920000] Counter=0, opIdx=6, overhead=16
- [ 0.930000] Counter=1, opIdx=2, overhead=0
- [ 0.930000] Counter=2, opIdx=1, overhead=18
- [ 0.940000] Counter=3, opIdx=2, overhead=0
- [ 0.940000] tun: Universal TUN/TAP device driver, 1.6
- [ 0.950000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.950000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
- [ 0.960000] Scanning device for bad blocks
- [ 0.970000] Bad eraseblock 68 at 0x000000880000
- [ 1.020000] Using static partition definition
- [ 1.020000] Creating 5 MTD partitions on "nand_mtd":
- [ 1.030000] 0x000000000000-0x000000200000 : "u-boot"
- [ 1.030000] 0x000000200000-0x000000500000 : "uImage"
- [ 1.040000] 0x000000500000-0x000000800000 : "uImage2"
- [ 1.040000] 0x000000800000-0x000001000000 : "failsafe"
- [ 1.050000] 0x000001000000-0x000008000000 : "root"
- [ 1.060000] UBI: attaching mtd4 to ubi0
- [ 1.060000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
- [ 1.070000] UBI: logical eraseblock size: 126976 bytes
- [ 1.070000] UBI: smallest flash I/O unit: 2048
- [ 1.080000] UBI: sub-page size: 512
- [ 1.080000] UBI: VID header offset: 2048 (aligned 2048)
- [ 1.090000] UBI: data offset: 4096
- [ 1.320000] UBI: attached mtd4 to ubi0
- [ 1.320000] UBI: MTD device name: "root"
- [ 1.330000] UBI: MTD device size: 112 MiB
- [ 1.330000] UBI: number of good PEBs: 896
- [ 1.340000] UBI: number of bad PEBs: 0
- [ 1.340000] UBI: max. allowed volumes: 128
- [ 1.340000] UBI: wear-leveling threshold: 4096
- [ 1.350000] UBI: number of internal volumes: 1
- [ 1.350000] UBI: number of user volumes: 1
- [ 1.360000] UBI: available PEBs: 0
- [ 1.360000] UBI: total number of reserved PEBs: 896
- [ 1.370000] UBI: number of PEBs reserved for bad PEB handling: 8
- [ 1.370000] UBI: max/mean erase counter: 1/0
- [ 1.380000] UBI: image sequence number: 0
- [ 1.380000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.390000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
- [ 1.390000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
- [ 1.400000] UBI: background thread "ubi_bgt0d" started, PID 445
- [ 1.430000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
- [ 1.450000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
- [ 1.450000] usb usb1: configuration #1 chosen from 1 choice
- [ 1.460000] hub 1-0:1.0: USB hub found
- [ 1.460000] hub 1-0:1.0: 1 port detected
- [ 1.470000] Initializing USB Mass Storage driver...
- [ 1.470000] usbcore: registered new interface driver usb-storage
- [ 1.480000] USB Mass Storage support registered.
- [ 1.480000] usbcore: registered new interface driver ums-datafab
- [ 1.490000] usbcore: registered new interface driver ums-freecom
- [ 1.490000] usbcore: registered new interface driver ums-jumpshot
- [ 1.500000] usbcore: registered new interface driver ums-sddr09
- [ 1.510000] usbcore: registered new interface driver ums-sddr55
- [ 1.510000] usbcore: registered new interface driver ums-usbat
- [ 1.520000] mice: PS/2 mouse device common for all mice
- [ 1.520000] i2c /dev entries driver
- [ 1.540000] sdhci: Secure Digital Host Controller Interface driver
- [ 1.540000] sdhci: Copyright(c) Pierre Ossman
- [ 1.550000] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
- [ 1.560000] usbcore: registered new interface driver usbhid
- [ 1.560000] usbhid: v2.6:USB HID core driver
- [ 1.570000] TCP cubic registered
- [ 1.570000] NET: Registered protocol family 17
- [ 1.580000] RPC: Registered udp transport module.
- [ 1.580000] RPC: Registered tcp transport module.
- [ 1.590000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 1.660000] UBIFS: recovery needed
- [ 1.770000] UBIFS: recovery completed
- [ 1.770000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- [ 1.780000] UBIFS: file system size: 110850048 bytes (108252 KiB, 105 MiB, 873 LEBs)
- [ 1.780000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
- [ 1.790000] UBIFS: media format: w4/r0 (latest is w4/r0)
- [ 1.800000] UBIFS: default compressor: lzo
- [ 1.800000] UBIFS: reserved for root: 0 bytes (0 KiB)
- [ 1.810000] VFS: Mounted root (ubifs filesystem) on device 0:11.
- [ 1.810000] Freeing init memory: 124K
- [ 1.830000] mmc0: new SD card at address bc6a
- [ 1.860000] mmcblk0: mmc0:bc6a SU02G 1.84 GiB
- [ 1.860000] mmcblk0: p1
- [ 4.030000] eth0: link up, full duplex, speed 100 Mbps
- [ 4.030000] eth0: started
- udhcpc (v1.16.1) started
- HWADDR 00 0x25 0x31 0x05 0xca 0x0a
- PIP0 202
- PIP1 10
- cat: can't open '/etc/resolv.conf': No such file or directory
- route: SIOCDELRT: No such process
- grep: /etc/resolv.conf: No such file or directory
- Sending discover...
- Sending select for 192.168.0.107...
- Lease of 192.168.0.107 obtained, lease time 604800
- HWADDR 00 0x25 0x31 0x05 0xca 0x0a
- PIP0 202
- PIP1 10
- route: SIOCDELRT: No such process
- modprobe: module 'vfat' not found
- [ 4.860000] ufsd: module license 'Commercial product' taints kernel.
- [ 4.860000] Disabling lock debugging due to kernel taint
- [ 4.900000] ufsd: driver 8.5 (NTFS4LINUX_U85_017_S[2011-08-17-16:51:48]) LBD=ON with delayalloc with ioctl loaded at bf000000
- [ 4.900000] NTFS support included
- [ 4.900000] Hfs+/HfsX support included
- [ 4.900000] For 'CloudEngines_PogoPlug_2011-08-03'
- Loading rt3070sta.ko: [ 5.240000] rtusb init rt2870 --->
- [ 5.250000] usbcore: registered new interface driver rt2870
- Success
- Loading xce.ko: [ 5.270000] Cloud Engines XCE Init [Version: 3.1.99.12]
- [ 5.280000] XCE: CPU MEMORY MAP:
- [ 5.280000] XCE: -- 0x00001000 - 0xbeffffff (3055 MB) User Space Mappings
- [ 5.290000] XCE: -- 0xbf000000 - 0xbfffffff ( 16 MB) Kernel module space
- [ 5.300000] XCE: -- 0xc0000000 - 0xc7ffffff ( 128 MB) Kernel direct-mapped ram
- [ 5.300000] XCE: -- 0xc8800000 - 0xe7ffffff ( 504 MB) Kernel vmalloc space
- [ 5.310000] XCE: -- 0xe8000000 - 0xfeffffff ( 367 MB) Kernel platform space
- [ 5.320000] XCE: CPU FEATURES:
- [ 5.320000] XCE: -- I Cache: enabled
- [ 5.330000] XCE: -- D Cache: enabled
- [ 5.330000] XCE: -- Branch Predict: enabled
- [ 5.330000] XCE: -- MMU: enabled
- [ 5.340000] XCE: -- Alignment Abort: enabled
- [ 5.350000] XCE: BLPARAMS: -- Loading properties [c49f3efc].
- [ 5.350000] XCE: BLPARAMS: -- MTD @ [c4324000].
- [ 5.360000] XCE: BLPARAMS: Locating parameter block...
- [ 5.360000] XCE: BLPARAMS: reading 2048 bytes @ a0000
- [ 5.370000] XCE: Loaded Property Size: 2048
- [ 5.380000] XCE: - 'cesvcid' -> 'NBH5AM2Z22W2BECPP9QKF5CE3S'
- [ 5.380000] XCE: - 'ceboardver' -> 'PPV4A1'
- [ 5.390000] XCE: -- ICache Prefetch: enabled
- [ 5.390000] XCE: -- DCache Prefetch: enabled
- [ 5.390000] XCE: -- L2 Cache: enabled
- [ 5.400000] XCE: -- L2 Prefetch: disabled
- [ 5.400000] XCE: -- L2 Writethrough: disabled
- [ 5.410000] XCE: -- Write Allocate: disabled
- [ 5.410000] XCE: -- Streaming: disabled
- [ 5.420000] XCE: Current GPIO State:
- [ 5.420000] XCE: GPIO L OUT: 0x21400000
- [ 5.430000] XCE: GPIO L OE: 0x10000000
- [ 5.430000] XCE: GPIO L BLINK: 0x00000000
- [ 5.430000] XCE: GPIO L POL: 0x00000000
- [ 5.440000] XCE: GPIO L IN: 0x01400000
- [ 5.440000] XCE: GPIO H OUT: 0xfffc7fff
- [ 5.450000] XCE: GPIO H OE: 0x00000000
- [ 5.450000] XCE: GPIO H BLINK: 0x00004000
- [ 5.450000] XCE: GPIO H POL: 0x00000000
- [ 5.460000] XCE: GPIO H IN: 0x0000000f
- Success
- Starting hbplug: Success
- / # [ 5.550000] XCE: BLPARAMS: -- Loading properties [c49f3ecc].
- [ 5.550000] XCE: BLPARAMS: -- MTD @ [c4324000].
- [ 5.560000] XCE: BLPARAMS: Locating parameter block...
- [ 5.560000] XCE: BLPARAMS: reading 2048 bytes @ a0000
- [ 5.570000] XCE: BLPARAMS: reading 2048 bytes @ a0800
- [ 5.580000] XCE: BLPARAMS: reading 2048 bytes @ a1000
- [ 5.580000] XCE: BLPARAMS: reading 2048 bytes @ a1800
- [ 10.850000] XCE: XCE: LED -> CONNECTED
- killall hbwd
- / # mknod /tmp/mmcblk0 b 179 0
- / # /sbin/fdisk /tmp/mmcblk0
- Command (m for help): /sbin/fdisk /tmp/mmcblk0
- /: unknown command
- Command Action
- a toggle a bootable flag
- b edit bsd disklabel
- c toggle the dos compatibility flag
- d delete a partition
- l list known partition types
- n add a new partition
- o create a new empty DOS partition table
- p print the partition table
- q quit without saving changes
- s create a new empty Sun disklabel
- t change a partition's system id
- u change display/entry units
- v verify the partition table
- w write table to disk and exit
- x extra functionality (experts only)
- Command (m for help): killall hbwd
- k: unknown command
- Command Action
- a toggle a bootable flag
- b edit bsd disklabel
- c toggle the dos compatibility flag
- d delete a partition
- l list known partition types
- n add a new partition
- o create a new empty DOS partition table
- p print the partition table
- q quit without saving changes
- s create a new empty Sun disklabel
- t change a partition's system id
- u change display/entry units
- v verify the partition table
- w write table to disk and exit
- x extra functionality (experts only)
- Command (m for help): mknod /tmp/mmcblk0 b 179 0
- Command Action
- a toggle a bootable flag
- b edit bsd disklabel
- c toggle the dos compatibility flag
- d delete a partition
- l list known partition types
- n add a new partition
- o create a new empty DOS partition table
- p print the partition table
- q quit without saving changes
- s create a new empty Sun disklabel
- t change a partition's system id
- u change display/entry units
- v verify the partition table
- w write table to disk and exit
- x extra functionality (experts only)
- Command (m for help): shutdown
- Command (m for help): m
- Command Action
- a toggle a bootable flag
- b edit bsd disklabel
- c toggle the dos compatibility flag
- d delete a partition
- l list known partition types
- n add a new partition
- o create a new empty DOS partition table
- p print the partition table
- q quit without saving changes
- s create a new empty Sun disklabel
- t change a partition's system id
- u change display/entry units
- v verify the partition table
- w write table to disk and exit
- x extra functionality (experts only)
- Command (m for help): q
- / # killall hbwd
- killall: hbwd: no process killed
- / # mknod /tmp/mmcblk0 b 179 0
- mknod: /tmp/mmcblk0: File exists
- / # /sbin/fdisk /tmp/mmcblk0
- Command (m for help): p
- Disk /tmp/mmcblk0: 1977 MB, 1977614336 bytes
- 62 heads, 61 sectors/track, 1021 cylinders
- Units = cylinders of 3782 * 512 = 1936384 bytes
- Device Boot Start End Blocks Id System
- /tmp/mmcblk0p1 * 1 1022 1931196+ 6 FAT16
- Partition 1 has different physical/logical beginnings (non-Linux?):
- phys=(0, 2, 10) logical=(0, 2, 14)
- Partition 1 has different physical/logical endings:
- phys=(957, 61, 61) logical=(1021, 18, 8)
- Command (m for help): o
- Building a new DOS disklabel. Changes will remain in memory only,
- until you decide to write them. After that the previous content
- won't be recoverable.
- Command (m for help): n
- Command action
- e extended
- p primary partition (1-4)
- p
- Partition number (1-4): 1
- First cylinder (1-1021, default 1): Using default value 1
- Last cylinder or +size or +sizeM or +sizeK (1-1021, default 1021): Using default value 1021
- Command (m for help): w
- The partition table has been altered!
- Calling ioctl() to re-read partition table
- [ 445.730000] mmcblk0: p1
- / # mknod /tmp/mmcblk0p1 b 179 1
- / # cd /tmp
- /tmp # wget http://archlinuxarm.org/os/pogoplug/mke2fs
- Connecting to archlinuxarm.org (50.116.36.110:80)
- wget: not an http or ftp url: https://archlinuxarm.org/os/pogoplug/mke2fs
- /tmp # wget http://archlinuxarm.org/os/pogoplug/mke2fs
- Connecting to archlinuxarm.org (50.116.36.110:80)
- wget: not an http or ftp url: https://archlinuxarm.org/os/pogoplug/mke2fs
- /tmp # m
- -/bin/sh: m: not found
- /tmp # exit
- / # exut
- -/bin/sh: exut: not found
- / # exit
- / # stop
- -/bin/sh: stop: not found
- / # shutdown
- -/bin/sh: shutdown: not found
- / # back
- -/bin/sh: back: not found
- / # anus
- -/bin/sh: anus: not found
- / #
- U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
- Pogoplug V4
- SoC: Kirkwood 88F6192_A1
- DRAM: 128 MiB
- WARNING: Caches not enabled
- NAND: 128 MiB
- MMC: kwsdio: 0
- In: serial
- Out: serial
- Err: serial
- Net: egiga0
- Hit any key to stop autoboot: 0
- MMC rescan: current device # 0 initialized OK
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- (Re)start USB...
- USB0: USB EHCI 1.00
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- ** Bad device usb 0 **
- ** Bad device usb 0 **
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- Reset IDE: ide_preinit failed
- ** Bad device size - ide 0 **
- ** Bad device size - ide 0 **
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- UBI: attaching mtd1 to ubi0
- UBI: physical eraseblock size: 131072 bytes (128 KiB)
- UBI: logical eraseblock size: 126976 bytes
- UBI: smallest flash I/O unit: 2048
- UBI: sub-page size: 512
- UBI: VID header offset: 2048 (aligned 2048)
- UBI: data offset: 4096
- UBI: attached mtd1 to ubi0
- UBI: MTD device name: "mtd=4"
- UBI: MTD device size: 112 MiB
- UBI: number of good PEBs: 896
- UBI: number of bad PEBs: 0
- UBI: max. allowed volumes: 128
- UBI: wear-leveling threshold: 4096
- UBI: number of internal volumes: 1
- UBI: number of user volumes: 1
- UBI: available PEBs: 0
- UBI: total number of reserved PEBs: 896
- UBI: number of PEBs reserved for bad PEB handling: 8
- UBI: max/mean erase counter: 1/0
- UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- UBIFS: mounted read-only
- UBIFS: file system size: 110850048 bytes (108252 KiB, 105 MiB, 873 LEBs)
- UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
- UBIFS: media format: w4/r0 (latest is w4/r0)
- UBIFS: default compressor: LZO
- UBIFS: reserved for root: 0 bytes (0 KiB)
- Loading file 'uboot.mtd0.dockstar.original.kwb' to addr 0x00800000 with size 524288 (0x00080000)...
- Done
- ## Starting application at 0x00800200 ...
- U-Boot 1.1.4 (Jul 16 2009 - 21:02:16) Cloud Engines (3.4.16)
- U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60
- Soc: MV88F6192 Rev 3 (DDR2)
- CPU running @ 800Mhz L2 running @ 400Mhz
- SysClock = 200Mhz , TClock = 166Mhz
- DRAM CAS Latency = 3 tRP = 3 tRAS = 8 tRCD=3
- DRAM CS[0] base 0x00000000 size 128MB
- DRAM Total size 128MB 16bit width
- Flash: 0 kB
- Addresses 8M - 0M are saved for the U-Boot usage.
- Mem malloc Initialization (8M - 7M): Done
- NAND:128 MB
- CPU : Marvell Feroceon (Rev 1)
- CLOUD ENGINES BOARD: PPV4A1
- Streaming disabled
- Write allocate disabled
- USB 0: host mode
- PEX 0: interface detected no Link.
- Net: egiga0 [PRIME], egiga1
- Hit any key to stop autoboot: 0
- Loading from NAND 128MB 3,3V 8-bit, offset 0x200000
- Image Name: Linux-2.6.31.8
- Created: 2011-08-23 20:00:55 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2080956 Bytes = 2 MB
- Load Address: 00008000
- Entry Point: 00008000
- ## Booting image at 00800000 ...
- Image Name: Linux-2.6.31.8
- Created: 2011-08-23 20:00:55 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2080956 Bytes = 2 MB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- OK
- Starting kernel ...
- Uncompressing Linux..................................................................................................................................... done, booting the kernel.
- [ 0.000000] Linux version 2.6.31.8 (afenn@kt) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #4 Tue Aug 23 13:00:50 PDT 2011
- [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
- [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000] Machine: Feroceon-KW
- [ 0.000000] Using UBoot passing parameters structure
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=4,2048 rootfstype=ubifs
- [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 128MB = 128MB total
- [ 0.000000] Memory: 118356KB available (3852K code, 261K data, 124K init, 0K highmem)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:128
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
- [ 0.230000] Mount-cache hash table entries: 512
- [ 0.230000] CPU: Testing write buffer coherency: ok
- [ 0.230000] NET: Registered protocol family 16
- [ 0.230000] Feroceon L2: Enabling L2
- [ 0.230000] Feroceon L2: Cache support initialised.
- [ 0.230000]
- [ 0.230000] CPU Interface
- [ 0.230000] -------------
- [ 0.230000] SDRAM_CS0 ....base 00000000, size 128MB
- [ 0.230000] SDRAM_CS1 ....disable
- [ 0.230000] SDRAM_CS2 ....disable
- [ 0.230000] SDRAM_CS3 ....disable
- [ 0.230000] PEX0_MEM ....base e0000000, size 128MB
- [ 0.230000] PEX0_IO ....base f2000000, size 1MB
- [ 0.230000] PEX1_MEM ....no such
- [ 0.230000] PEX1_IO ....no such
- [ 0.230000] INTER_REGS ....base f1000000, size 1MB
- [ 0.230000] NFLASH_CS ....base fa000000, size 2MB
- [ 0.230000] SPI_CS ....base f4000000, size 16MB
- [ 0.230000] BOOT_ROM_CS ....no such
- [ 0.230000] DEV_BOOTCS ....no such
- [ 0.230000] CRYPT_ENG ....base f0000000, size 2MB
- [ 0.230000]
- [ 0.230000] Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)-- SHEEVA PLUG Soc: 88F6192 A1 LE
- [ 0.230000]
- [ 0.230000] Detected Tclk 166666667 and SysClk 200000000
- [ 0.230000] Marvell USB EHCI Host controller #0: c403e740
- [ 0.730000] PEX0 interface detected no Link.
- [ 0.740000] PCI: bus0: Fast back to back transfers enabled
- [ 0.740000] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
- [ 0.750000] bio: create slab <bio-0> at 0
- [ 0.750000] SCSI subsystem initialized
- [ 0.750000] usbcore: registered new interface driver usbfs
- [ 0.750000] usbcore: registered new interface driver hub
- [ 0.750000] usbcore: registered new device driver usb
- [ 0.750000] NET: Registered protocol family 2
- [ 0.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.750000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.750000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.750000] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.750000] TCP reno registered
- [ 0.750000] NET: Registered protocol family 1
- [ 0.750000] cpufreq: Init kirkwood cpufreq driver
- [ 0.760000] XOR registered 4 channels
- [ 0.760000] XOR 2nd invalidate WA enabled
- [ 0.760000] cesadev_init(c000d7fc)
- [ 0.760000] mvCesaInit: sessions=640, queue=64, pSram=f0000000
- [ 0.760000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.770000] msgmni has been set to 231
- [ 0.770000] alg: No test for cipher_null (cipher_null-generic)
- [ 0.770000] alg: No test for ecb(cipher_null) (ecb-cipher_null)
- [ 0.770000] alg: No test for digest_null (digest_null-generic)
- [ 0.770000] alg: No test for compress_null (compress_null-generic)
- [ 0.780000] alg: No test for stdrng (krng)
- [ 0.780000] alg: No test for hmac(digest_null) (hmac(digest_null-generic))
- [ 0.790000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.790000] io scheduler noop registered
- [ 0.790000] io scheduler anticipatory registered (default)
- [ 0.790000] Initializing ths8200_init
- [ 0.790000] Initializing dove_adi9889_init
- [ 0.810000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.810000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
- [ 0.810000] console [ttyS0] enabled
- [ 0.820000]
- [ 0.820000] Warning Sata is Powered Off
- [ 0.820000] Loading Marvell Ethernet Driver:
- [ 0.830000] o Cached descriptors in DRAM
- [ 0.830000] o DRAM SW cache-coherency
- [ 0.840000] o 1 Giga ports supported
- [ 0.840000] o Single RX Queue support - ETH_DEF_RXQ=0
- [ 0.840000] o Single TX Queue support - ETH_DEF_TXQ=0
- [ 0.850000] o TCP segmentation offload (TSO) supported
- [ 0.860000] o Large Receive offload (LRO) supported
- [ 0.860000] o Receive checksum offload supported
- [ 0.860000] o Transmit checksum offload supported
- [ 0.870000] o Network Fast Processing (Routing) supported - (Disabled)
- [ 0.880000] o Driver ERROR statistics enabled
- [ 0.880000] o Proc tool API enabled
- [ 0.880000] o SKB Reuse supported - (Disabled)
- [ 0.890000] o SKB Recycle supported - (Disabled)
- [ 0.890000] o Rx descripors: q0=128
- [ 0.900000] o Tx descripors: q0=532
- [ 0.900000] o Loading network interface(s):
- [ 0.910000] o register under mv88fx_eth platform
- [ 0.910000] o eth0, ifindex = 2, GbE port = 0
- [ 0.920000]
- [ 0.920000] mvFpRuleDb (c432a000): 1024 entries, 4096 bytes
- [ 0.920000] Counter=0, opIdx=6, overhead=16
- [ 0.930000] Counter=1, opIdx=2, overhead=0
- [ 0.930000] Counter=2, opIdx=1, overhead=18
- [ 0.940000] Counter=3, opIdx=2, overhead=0
- [ 0.940000] tun: Universal TUN/TAP device driver, 1.6
- [ 0.950000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.950000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
- [ 0.960000] Scanning device for bad blocks
- [ 0.970000] Bad eraseblock 68 at 0x000000880000
- [ 1.020000] Using static partition definition
- [ 1.020000] Creating 5 MTD partitions on "nand_mtd":
- [ 1.030000] 0x000000000000-0x000000200000 : "u-boot"
- [ 1.030000] 0x000000200000-0x000000500000 : "uImage"
- [ 1.040000] 0x000000500000-0x000000800000 : "uImage2"
- [ 1.040000] 0x000000800000-0x000001000000 : "failsafe"
- [ 1.050000] 0x000001000000-0x000008000000 : "root"
- [ 1.060000] UBI: attaching mtd4 to ubi0
- [ 1.060000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
- [ 1.070000] UBI: logical eraseblock size: 126976 bytes
- [ 1.070000] UBI: smallest flash I/O unit: 2048
- [ 1.080000] UBI: sub-page size: 512
- [ 1.080000] UBI: VID header offset: 2048 (aligned 2048)
- [ 1.090000] UBI: data offset: 4096
- [ 1.320000] UBI: attached mtd4 to ubi0
- [ 1.320000] UBI: MTD device name: "root"
- [ 1.330000] UBI: MTD device size: 112 MiB
- [ 1.330000] UBI: number of good PEBs: 896
- [ 1.340000] UBI: number of bad PEBs: 0
- [ 1.340000] UBI: max. allowed volumes: 128
- [ 1.340000] UBI: wear-leveling threshold: 4096
- [ 1.350000] UBI: number of internal volumes: 1
- [ 1.350000] UBI: number of user volumes: 1
- [ 1.360000] UBI: available PEBs: 0
- [ 1.360000] UBI: total number of reserved PEBs: 896
- [ 1.370000] UBI: number of PEBs reserved for bad PEB handling: 8
- [ 1.370000] UBI: max/mean erase counter: 1/0
- [ 1.380000] UBI: image sequence number: 0
- [ 1.380000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.390000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
- [ 1.390000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
- [ 1.400000] UBI: background thread "ubi_bgt0d" started, PID 445
- [ 1.430000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
- [ 1.450000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
- [ 1.450000] usb usb1: configuration #1 chosen from 1 choice
- [ 1.460000] hub 1-0:1.0: USB hub found
- [ 1.460000] hub 1-0:1.0: 1 port detected
- [ 1.470000] Initializing USB Mass Storage driver...
- [ 1.470000] usbcore: registered new interface driver usb-storage
- [ 1.480000] USB Mass Storage support registered.
- [ 1.480000] usbcore: registered new interface driver ums-datafab
- [ 1.490000] usbcore: registered new interface driver ums-freecom
- [ 1.490000] usbcore: registered new interface driver ums-jumpshot
- [ 1.500000] usbcore: registered new interface driver ums-sddr09
- [ 1.510000] usbcore: registered new interface driver ums-sddr55
- [ 1.510000] usbcore: registered new interface driver ums-usbat
- [ 1.520000] mice: PS/2 mouse device common for all mice
- [ 1.520000] i2c /dev entries driver
- [ 1.540000] sdhci: Secure Digital Host Controller Interface driver
- [ 1.540000] sdhci: Copyright(c) Pierre Ossman
- [ 1.550000] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
- [ 1.560000] usbcore: registered new interface driver usbhid
- [ 1.560000] usbhid: v2.6:USB HID core driver
- [ 1.570000] TCP cubic registered
- [ 1.570000] NET: Registered protocol family 17
- [ 1.580000] RPC: Registered udp transport module.
- [ 1.580000] RPC: Registered tcp transport module.
- [ 1.590000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 1.760000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- [ 1.760000] UBIFS: file system size: 110850048 bytes (108252 KiB, 105 MiB, 873 LEBs)
- [ 1.770000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
- [ 1.780000] UBIFS: media format: w4/r0 (latest is w4/r0)
- [ 1.780000] UBIFS: default compressor: lzo
- [ 1.790000] UBIFS: reserved for root: 0 bytes (0 KiB)
- [ 1.790000] VFS: Mounted root (ubifs filesystem) on device 0:11.
- [ 1.800000] Freeing init memory: 124K
- [ 1.820000] mmc0: new SD card at address bc6a
- [ 1.840000] mmcblk0: mmc0:bc6a SU02G 1.84 GiB
- [ 1.840000] mmcblk0: p1
- [ 3.910000] eth0: link up, full duplex, speed 100 Mbps
- [ 3.920000] eth0: started
- udhcpc (v1.16.1) started
- HWADDR 00 0x25 0x31 0x05 0xca 0x0a
- PIP0 202
- PIP1 10
- cat: can't open '/etc/resolv.conf': No such file or directory
- route: SIOCDELRT: No such process
- grep: /etc/resolv.conf: No such file or directory
- Sending discover...
- Sending select for 192.168.0.107...
- Lease of 192.168.0.107 obtained, lease time 604800
- HWADDR 00 0x25 0x31 0x05 0xca 0x0a
- PIP0 202
- PIP1 10
- route: SIOCDELRT: No such process
- modprobe: module 'vfat' not found
- [ 4.750000] ufsd: module license 'Commercial product' taints kernel.
- [ 4.750000] Disabling lock debugging due to kernel taint
- [ 4.790000] ufsd: driver 8.5 (NTFS4LINUX_U85_017_S[2011-08-17-16:51:48]) LBD=ON with delayalloc with ioctl loaded at bf000000
- [ 4.790000] NTFS support included
- [ 4.790000] Hfs+/HfsX support included
- [ 4.790000] For 'CloudEngines_PogoPlug_2011-08-03'
- Loading rt3070sta.ko: [ 5.130000] rtusb init rt2870 --->
- [ 5.140000] usbcore: registered new interface driver rt2870
- Success
- Loading xce.ko: [ 5.160000] Cloud Engines XCE Init [Version: 3.1.99.12]
- [ 5.170000] XCE: CPU MEMORY MAP:
- [ 5.170000] XCE: -- 0x00001000 - 0xbeffffff (3055 MB) User Space Mappings
- [ 5.180000] XCE: -- 0xbf000000 - 0xbfffffff ( 16 MB) Kernel module space
- [ 5.190000] XCE: -- 0xc0000000 - 0xc7ffffff ( 128 MB) Kernel direct-mapped ram
- [ 5.190000] XCE: -- 0xc8800000 - 0xe7ffffff ( 504 MB) Kernel vmalloc space
- [ 5.200000] XCE: -- 0xe8000000 - 0xfeffffff ( 367 MB) Kernel platform space
- [ 5.210000] XCE: CPU FEATURES:
- [ 5.210000] XCE: -- I Cache: enabled
- [ 5.220000] XCE: -- D Cache: enabled
- [ 5.220000] XCE: -- Branch Predict: enabled
- [ 5.230000] XCE: -- MMU: enabled
- [ 5.230000] XCE: -- Alignment Abort: enabled
- [ 5.240000] XCE: BLPARAMS: -- Loading properties [c49f3efc].
- [ 5.240000] XCE: BLPARAMS: -- MTD @ [c4324000].
- [ 5.250000] XCE: BLPARAMS: Locating parameter block...
- [ 5.250000] XCE: BLPARAMS: reading 2048 bytes @ a0000
- [ 5.260000] XCE: Loaded Property Size: 2048
- [ 5.270000] XCE: - 'cesvcid' -> 'NBH5AM2Z22W2BECPP9QKF5CE3S'
- [ 5.270000] XCE: - 'ceboardver' -> 'PPV4A1'
- [ 5.280000] XCE: -- ICache Prefetch: enabled
- [ 5.280000] XCE: -- DCache Prefetch: enabled
- [ 5.280000] XCE: -- L2 Cache: enabled
- [ 5.290000] XCE: -- L2 Prefetch: disabled
- [ 5.290000] XCE: -- L2 Writethrough: disabled
- [ 5.300000] XCE: -- Write Allocate: disabled
- [ 5.300000] XCE: -- Streaming: disabled
- [ 5.310000] XCE: Current GPIO State:
- [ 5.310000] XCE: GPIO L OUT: 0x21400000
- [ 5.320000] XCE: GPIO L OE: 0x10000000
- [ 5.320000] XCE: GPIO L BLINK: 0x00000000
- [ 5.320000] XCE: GPIO L POL: 0x00000000
- [ 5.330000] XCE: GPIO L IN: 0x01400000
- [ 5.330000] XCE: GPIO H OUT: 0xfffc7fff
- [ 5.340000] XCE: GPIO H OE: 0x00000000
- [ 5.340000] XCE: GPIO H BLINK: 0x00004000
- [ 5.340000] XCE: GPIO H POL: 0x00000000
- [ 5.350000] XCE: GPIO H IN: 0x0000000f
- Success
- Starting hbplug: Success
- / # [ 5.440000] XCE: BLPARAMS: -- Loading properties [c49f3ecc].
- [ 5.440000] XCE: BLPARAMS: -- MTD @ [c4324000].
- [ 5.450000] XCE: BLPARAMS: Locating parameter block...
- [ 5.450000] XCE: BLPARAMS: reading 2048 bytes @ a0000
- [ 5.460000] XCE: BLPARAMS: reading 2048 bytes @ a0800
- [ 5.470000] XCE: BLPARAMS: reading 2048 bytes @ a1000
- [ 5.470000] XCE: BLPARAMS: reading 2048 bytes @ a1800
- [ 10.720000] XCE: XCE: LED -> CONNECTED
- killall hbwd
- / # mknod /tmp/mmcblk0 b 179 0
- / #
- / # mknod /tmp/mmcblk0 b 179 0
- mknod: /tmp/mmcblk0: File exists
- / # /sbin/fdisk /tmp/mmcblk0
- Command (m for help): p
- Disk /tmp/mmcblk0: 1977 MB, 1977614336 bytes
- 62 heads, 61 sectors/track, 1021 cylinders
- Units = cylinders of 3782 * 512 = 1936384 bytes
- Device Boot Start End Blocks Id System
- /tmp/mmcblk0p1 1 1021 1930680+ 83 Linux
- Command (m for help): o
- Building a new DOS disklabel. Changes will remain in memory only,
- until you decide to write them. After that the previous content
- won't be recoverable.
- Command (m for help): n
- Command action
- e extended
- p primary partition (1-4)
- p
- Partition number (1-4): 1
- First cylinder (1-1021, default 1): Using default value 1
- Last cylinder or +size or +sizeM or +sizeK (1-1021, default 1021): Using default value 1021
- Command (m for help): mknod /tmp/mmcblk0p1 b 179 1
- Command Action
- a toggle a bootable flag
- b edit bsd disklabel
- c toggle the dos compatibility flag
- d delete a partition
- l list known partition types
- n add a new partition
- o create a new empty DOS partition table
- p print the partition table
- q quit without saving changes
- s create a new empty Sun disklabel
- t change a partition's system id
- u change display/entry units
- v verify the partition table
- w write table to disk and exit
- x extra functionality (experts only)
- Command (m for help): w
- The partition table has been altered!
- Calling ioctl() to re-read partition table
- [ 189.640000] mmcblk0: p1
- / # mknod /tmp/mmcblk0p1 b 179 1
- / # cd /tmp
- /tmp # wget http://archlinuxarm.org/os/pogoplug/mke2fs
- Connecting to archlinuxarm.org (50.116.36.110:80)
- wget: not an http or ftp url: https://archlinuxarm.org/os/pogoplug/mke2fs
- /tmp # wget
- BusyBox v1.16.1 (2011-08-23 13:02:26 PDT) multi-call binary.
- Usage: wget [-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url
- /tmp # wget -o http://archlinuxarm.org/os/pogoplug/mke2fs
- wget: invalid option -- 'o'
- BusyBox v1.16.1 (2011-08-23 13:02:26 PDT) multi-call binary.
- Usage: wget [-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url
- /tmp # wget -o file http://archlinuxarm.org/os/pogoplug/mke2fs
- wget: invalid option -- 'o'
- BusyBox v1.16.1 (2011-08-23 13:02:26 PDT) multi-call binary.
- Usage: wget [-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url
- /tmp # wget http://archlinuxarm.org/os/pogoplug/mke2fs
- Connecting to archlinuxarm.org (50.116.36.110:80)
- wget: not an http or ftp url: https://archlinuxarm.org/os/pogoplug/mke2fs
- /tmp # wget 50.116.36.110:80
- wget: not an http or ftp url: 50.116.36.110:80
- /tmp # wget http://ca.us.mirror.archlinuxarm.org/os/pogoplug/mke2fs
- Connecting to ca.us.mirror.archlinuxarm.org (191.101.9.207:80)
- /tmp # wget http://ca.us.mirror.archlinuxarm.org/os/pogoplug/mke2fs
- Connecting to ca.us.mirror.archlinuxarm.org (191.101.9.207:80)
- wget: can't open 'mke2fs': File exists
- /tmp # chmod +x mke2fs
- /tmp # /tmp/mke2fs -L rootfs -j /tmp/mmcblk0p1
- mke2fs 1.41.9 (22-Aug-2009)
- Filesystem label=rootfs
- OS type: Linux
- Block size=4096 (log=2)
- Fragment size=4096 (log=2)
- 120720 inodes, 482670 blocks
- 24133 blocks (5.00%) reserved for the super user
- First data block=0
- Maximum filesystem blocks=494927872
- 15 block groups
- 32768 blocks per group, 32768 fragments per group
- 8048 inodes per group
- Superblock backups stored on blocks:
- 32768, 98304, 163840, 229376, 294912
- Writing inode tables: mkdir /tmp/mnt
- done
- Creating journal (8192 blocks): mkdir /tmp/mnt
- mkdir /tmp/mnt mount /tmp/mmcblk0p1 /tmp/mnt done
- Writing superblocks and filesystem accounting information: done
- This filesystem will be automatically checked every 22 mounts or
- 180 days, whichever comes first. Use tune2fs -c or -i to override.
- /tmp # mkdir /tmp/mnt
- /tmp #
- /tmp # mkdir /tmp/mnt
- mkdir: can't create directory '/tmp/mnt': File exists
- /tmp # mkdir /tmp/mnt
- mkdir: can't create directory '/tmp/mnt': File exists
- /tmp # mount /tmp/mmcblk0p1 /tmp/mnt
- [ 1207.820000] kjournald starting. Commit interval 5 seconds
- [ 1207.830000] EXT3 FS on mmcblk0p1, internal journal
- [ 1207.840000] EXT3-fs: mounted filesystem with writeback data mode.
- /tmp # mount /tmp/mmcblk0p1 /tmp/mnt
- mount: mounting /tmp/mmcblk0p1 on /tmp/mnt failed: Device or resource busy
- /tmp # mkdir /tmp/mnt
- mkdir: can't create directory '/tmp/mnt': File exists
- /tmp # cd /tmp/mnt
- /tmp/mnt # wget http://download.qnology.com/pogoplug/v4/Debian-3.14.0-kirkwood-t
- ld-1-rootfs-bodhi.tar.bz2
- Connecting to download.qnology.com (162.252.240.221:80)
- wget http://download.qnology.com/pogoplug/v4/Debian-3.14.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2
- wget: can't connect to remote host (162.252.240.221): Connection timed out
- /tmp/mnt # wget http://download.qnology.com/pogoplug/v4/Debian-3.14.0-kirkwood-t
- ld-1-rootfs-bodhi.tar.bz2
- Connecting to download.qnology.com (162.252.240.221:80)
- wget: can't connect to remote host (162.252.240.221): Connection timed out
- /tmp/mnt # wget http://download.qnology.com/pogoplug/v4/Debian-3.14.0-kirkwood-t
- ld-1-rootfs-bodhi.tar.bz2
- Connecting to download.qnology.com (162.252.240.221:80)
- wget: can't connect to remote host (162.252.240.221): Connection timed out
- /tmp/mnt # wget http://mirror.jblee.kr/Debian-3.14.0-kirkwood-tld-1-rootfs-bodhi
- .tar.bz2
- Connecting to mirror.jblee.kr (74.91.149.200:80)
- /tmp/mnt # wget http://mirror.jblee.kr/Debian-3.14.0-kirkwood-tld-1-rootfs-bodhi
- .tar.bz2
- Connecting to mirror.jblee.kr (74.91.149.200:80)
- wget: can't open 'Debian-3.14.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2': File exists
- /tmp/mnt # tar -xjf Debian-3.14.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2
- /tmp/mnt # rm Debian-3.14.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2
- /tmp/mnt # rm Debian-3.14.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2
- rm: can't remove 'Debian-3.14.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2': No such file or directory
- /tmp/mnt # /tmp/fw_setenv bootcmd 'run bootcmd_mmc; run bootcmd_usb; run bootcmd
- _sata; run bootcmd_pogo; reset'
- -/bin/sh: /tmp/fw_setenv: not found
- /tmp/mnt # sync
- /tmp/mnt # cd ..
- /tmp # umount /tmp/mnt
- /tmp # /sbin/reboot
- The system is going down NOW!
- Sent SIGTERM to all processes
- Sent SIGKILL to[ 2980.150000] Restarting system.
- [ 2980.150000] Reseting !!
- U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
- Pogoplug V4
- SoC: Kirkwood 88F6192_A1
- DRAM: 128 MiB
- WARNING: Caches not enabled
- NAND: 128 MiB
- MMC: kwsdio: 0
- In: serial
- Out: serial
- Err: serial
- Net: egiga0
- Hit any key to stop autoboot: 0
- MMC rescan: current device # 0 initialized OK
- 2461416 bytes read in 1212 ms (1.9 MiB/s)
- 6362802 bytes read in 1507 ms (4 MiB/s)
- ## Booting kernel from Legacy Image at 00800000 ...
- Image Name: Linux-3.14.0-kirkwood-tld-1
- Created: 2014-04-06 20:44:27 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2461352 Bytes = 2.3 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 01100000 ...
- Image Name: initramfs-3.14.0-kirkwood-tld-1
- Created: 2014-04-06 20:44:41 UTC
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 6362738 Bytes = 6.1 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Using machid 0xf78 from environment
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.14.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 PREEMPT Tue Apr 1 22:54:58 PDT 2014
- [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
- [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000] Machine: Pogoplug V4
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootdelay=10 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 116244K/131072K available (4779K kernel code, 352K rwdata, 1644K rodata, 213K init, 424K bss, 14828K reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc064df14 (6424 kB)
- [ 0.000000] .init : 0xc064e000 - 0xc0683444 ( 214 kB)
- [ 0.000000] .data : 0xc0684000 - 0xc06dc3c4 ( 353 kB)
- [ 0.000000] .bss : 0xc06dc3c4 - 0xc074665c ( 425 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:114
- [ 0.000018] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
- [ 7.715859] Console: colour dummy device 80x30
- [ 7.715906] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
- [ 7.805496] pid_max: default: 32768 minimum: 301
- [ 7.805655] Security Framework initialized
- [ 7.805747] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 7.805778] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 7.806671] Initializing cgroup subsys devices
- [ 7.806708] Initializing cgroup subsys freezer
- [ 7.806726] Initializing cgroup subsys net_cls
- [ 7.806740] Initializing cgroup subsys blkio
- [ 7.806853] CPU: Testing write buffer coherency: ok
- [ 7.807431] Setting up static identity map for 0x485fa0 - 0x485fdc
- [ 7.810627] devtmpfs: initialized
- [ 7.814636] prandom: seed boundary self test passed
- [ 7.820696] prandom: 100 self tests passed
- [ 7.820718] pinctrl core: initialized pinctrl subsystem
- [ 7.821279] regulator-dummy: no parameters
- [ 7.821784] NET: Registered protocol family 16
- [ 7.822457] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 7.823642] cpuidle: using governor ladder
- [ 7.823668] cpuidle: using governor menu
- [ 7.823842] Kirkwood: MV88F6281-A1, TCLK=166666667.
- [ 7.823874] Feroceon L2: Enabling L2
- [ 7.823925] Feroceon L2: Cache support initialised.
- [ 7.824618] POGOPLUGV4: failed to setup USB VBUS GPIO
- [ 7.825806] Kirkwood PCIe port 0: link down
- [ 7.825822] PCI: bus0 uses PCIe port 0
- [ 7.825998] PCI host bridge to bus 0000:00
- [ 7.826027] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
- [ 7.826045] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
- [ 7.826064] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 7.826492] PCI: bus0: Fast back to back transfers disabled
- [ 7.832776] bio: create slab <bio-0> at 0
- [ 7.833426] vgaarb: loaded
- [ 7.833851] usbcore: registered new interface driver usbfs
- [ 7.833948] usbcore: registered new interface driver hub
- [ 7.834111] usbcore: registered new device driver usb
- [ 7.835185] Switched to clocksource orion_clocksource
- [ 7.870684] NET: Registered protocol family 2
- [ 7.871608] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 7.871644] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 7.871675] TCP: Hash tables configured (established 1024 bind 1024)
- [ 7.871783] TCP: reno registered
- [ 7.871801] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 7.871833] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 7.872118] NET: Registered protocol family 1
- [ 7.872568] RPC: Registered named UNIX socket transport module.
- [ 7.872585] RPC: Registered udp transport module.
- [ 7.872595] RPC: Registered tcp transport module.
- [ 7.872605] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 7.872980] Unpacking initramfs...
- [ 8.648920] Freeing initrd memory: 6208K (c1101000 - c1711000)
- [ 8.649084] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 8.649888] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 8.650113] audit: initializing netlink subsys (disabled)
- [ 8.650190] audit: type=2000 audit(0.920:1): initialized
- [ 8.651140] bounce pool size: 64 pages
- [ 8.651240] zbud: loaded
- [ 8.651493] VFS: Disk quotas dquot_6.5.2
- [ 8.651570] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 8.651991] NFS: Registering the id_resolver key type
- [ 8.652078] Key type id_resolver registered
- [ 8.652091] Key type id_legacy registered
- [ 8.652116] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 8.652129] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 8.652359] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 8.652753] msgmni has been set to 239
- [ 8.652926] Key type big_key registered
- [ 8.655670] alg: No test for stdrng (krng)
- [ 8.655800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 8.655816] io scheduler noop registered
- [ 8.655827] io scheduler deadline registered
- [ 8.655874] io scheduler cfq registered (default)
- [ 8.656276] mv_xor mv_xor.0: Marvell shared XOR driver
- [ 8.695273] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
- [ 8.735266] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
- [ 8.735441] mv_xor mv_xor.1: Marvell shared XOR driver
- [ 8.775273] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
- [ 8.815271] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
- [ 8.815706] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 8.836591] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
- [ 9.423779] console [ttyS0] enabled
- [ 9.428796] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
- [ 9.435128] nand: Hynix H27U1G8F2BTR-BC
- [ 9.438984] nand: 128MiB, SLC, page size: 2048, OOB size: 64
- [ 9.444622] Scanning device for bad blocks
- [ 9.456303] Bad eraseblock 68 at 0x000000880000
- [ 9.566327] 5 cmdlinepart partitions found on MTD device orion_nand
- [ 9.572565] Creating 5 MTD partitions on "orion_nand":
- [ 9.577707] 0x000000000000-0x000000200000 : "u-boot"
- [ 9.583051] 0x000000200000-0x000000500000 : "uImage"
- [ 9.588400] 0x000000500000-0x000000800000 : "uImage2"
- [ 9.593801] 0x000000800000-0x000001000000 : "failsafe"
- [ 9.599319] 0x000001000000-0x000008000000 : "root"
- [ 9.605051] m25p80 spi0.0: m25p05-nonjedec (64 Kbytes)
- [ 9.619882] libphy: Fixed MDIO Bus: probed
- [ 9.638416] libphy: orion_mdio_bus: probed
- [ 9.642641] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
- [ 10.723577] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:ca:0a
- [ 10.732560] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 10.739086] ehci-pci: EHCI PCI platform driver
- [ 10.743595] ehci-orion: EHCI orion driver
- [ 10.747711] orion-ehci orion-ehci.0: EHCI Host Controller
- [ 10.753123] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
- [ 10.760847] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
- [ 10.785231] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
- [ 10.791353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 10.798145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 10.805360] usb usb1: Product: EHCI Host Controller
- [ 10.810222] usb usb1: Manufacturer: Linux 3.14.0-kirkwood-tld-1 ehci_hcd
- [ 10.816911] usb usb1: SerialNumber: orion-ehci.0
- [ 10.822359] hub 1-0:1.0: USB hub found
- [ 10.826183] hub 1-0:1.0: 1 port detected
- [ 10.830873] mousedev: PS/2 mouse device common for all mice
- [ 11.845390] rtc-mv rtc-mv: internal RTC not ticking
- [ 11.850408] i2c /dev entries driver
- [ 11.854786] hidraw: raw HID events driver (C) Jiri Kosina
- [ 11.860621] drop_monitor: Initializing network drop monitor service
- [ 11.867180] TCP: cubic registered
- [ 11.870488] NET: Registered protocol family 17
- [ 11.875062] Key type dns_resolver registered
- [ 11.880024] registered taskstats version 1
- [ 11.884889] regulator-dummy: incomplete constraints, leaving on
- [ 11.891290] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 11.899960] Freeing unused kernel memory: 212K (c064e000 - c0683000)
- Loading, please wait...
- [ 11.995343] udevd[57]: starting version 175
- [ 12.238055] mvsdio mvsdio: no pins associated
- [ 12.265116] SCSI subsystem initialized
- [ 12.315382] mvsdio mvsdio: using GPIO for card detection
- [ 12.364580] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 12.378373] sata_mv sata_mv.0: cannot get optional clkdev
- [ 12.383833] sata_mv sata_mv.0: slots 32 ports 1
- [ 12.388558] mmc0: new SD card at address bc6a
- [ 12.445612] scsi0 : sata_mv
- [ 12.448788] ata1: SATA max UDMA/133 irq 21
- [ 12.531123] mmcblk0: mmc0:bc6a SU02G 1.84 GiB
- [ 12.540301] mmcblk0: p1
- [ 12.795252] ata1: SATA link down (SStatus 0 SControl F300)
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- [ 22.941694] EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode
- [ 22.948638] kjournald starting. Commit interval 5 seconds
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- INIT: version 2.88 booting
- [info] Using makefile-style concurrent boot in runlevel S.
- [....] Starting the hotplug events dispatcher: udevd[ 24.496116] udevd[232]: starting version 175
- . ok
- [ ok ] Synthesizing the initial hotplug events...done.
- [....] [ 25.020393] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- Waiting for /dev to be fully populated...[ 25.181099] alg: hash: Test 1 failed for mv-hmac-sha1
- [ 25.188438] 00000000: 0c aa 9f d5 37 c3 79 3a 91 d9 21 5f 42 2b 2c 24
- [ 25.194864] 00000010: b7 c3 16 0c
- [ 25.222283] orion_wdt: Initial timeout 25 sec
- done.
- [ ok ] Activating swap...done.
- [....] Checking root file system...fsck from util-linux 2.20.1
- rootfs: clean, 13119/120720 files, 86998/482670 blocks
- done.
- [ 26.823295] EXT3-fs (mmcblk0p1): using internal journal
- [ ok ] Loading kernel modules...done.
- [ ok ] Cleaning up temporary files... /tmp /lib/init/rw.
- [ 28.769347] random: nonblocking pool is initialized
- [ ok ] Activating lvm and md swap...done.
- [....] Checking file systems...fsck from util-linux 2.20.1
- done.
- [ ok ] Mounting local filesystems...done.
- [ ok ] Activating swapfile swap...done.
- [ ok ] Cleaning up temporary files....
- [ ok ] Setting kernel variables ...done.
- [....] Configuring network interfaces...[ 32.895404] NET: Registered protocol family 10
- Internet Systems Consortium DHCP Client 4.2.2
- Copyright 2004-2011 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- [ 34.197763] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
- [ 34.203862] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Listening on LPF/eth0/00:25:31:05:ca:0a
- Sending on LPF/eth0/00:25:31:05:ca:0a
- Sending on Socket/fallback
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- [ 35.879871] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
- [ 35.889637] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- DHCPNAK from 192.168.0.1
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- DHCPOFFER from 192.168.0.1
- DHCPACK from 192.168.0.1
- bound to 192.168.0.107 -- renewal in 265038 seconds.
- done.
- [ ok ] Starting rpcbind daemon....
- [ ok ] Starting NFS common utilities: statd idmapd.
- [ ok ] Cleaning up temporary files....
- INIT: Entering runlevel: 2
- [info] Using makefile-style concurrent boot in runlevel 2.
- [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
- 1681 (syslogd)
- . ok
- [ ok ] Starting system message bus: dbus.
- [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
- [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- [ ok ] Starting NFS common utilities: statd idmapd.
- [ ok ] Starting rpcbind daemon...[....] Already running..
- [ ok ] Starting NTP server: ntpd.
- 1679 (klogd)
- . ok
- [warn] Not starting NFS kernel daemon: no exports. ... (warning).
- [ ok ] Starting OpenBSD Secure Shell server: sshd.
- Debian GNU/Linux 7 debian ttyS0
- debian login: passwd
- Password:
- a
- Login incorrect
- debian login: passwd
- Password:
- root
- Login incorrect
- debian login: root
- Password:
- root
- r
- Login incorrect
- debian login: passwd
- Password:
- Login timed out after 60 seconds.
- Debian GNU/Linux 7 debian ttyS0
- debian login: root
- Password:
- Last login: Tue Apr 15 17:03:23 PDT 2014 from 192.168.0.100 on pts/0
- Linux debian 3.14.0-kirkwood-tld-1 #1 PREEMPT Tue Apr 1 22:54:58 PDT 2014 armv5tel
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- root@debian:~# rm /etc/ssh/ssh_host*
- root@debian:~# ssh-keygen -A
- ssh-keygen: generating new host keys: RSA1 RSA DSA ECDSA
- root@debian:~# apt-get update
- Get:1 http://security.debian.org wheezy/updates Release.gpg [1554 B]
- Get:2 http://security.debian.org wheezy/updates Release [39.0 kB]
- Get:3 http://ftp.us.debian.org wheezy Release.gpg [2373 B]
- Get:4 http://ftp.us.debian.org wheezy Release [191 kB]
- Get:5 http://security.debian.org wheezy/updates/main armel Packages [437 kB]
- Get:6 http://ftp.us.debian.org wheezy/main armel Packages [5710 kB]
- Get:7 http://security.debian.org wheezy/updates/contrib armel Packages [14 B]
- Get:8 http://security.debian.org wheezy/updates/non-free armel Packages [14 B]
- Get:9 http://security.debian.org wheezy/updates/contrib Translation-en [14 B]
- Get:10 http://security.debian.org wheezy/updates/main Translation-en [247 kB]
- Get:11 http://security.debian.org wheezy/updates/non-free Translation-en [14 B]
- Get:12 http://ftp.us.debian.org wheezy/main Translation-en [3846 kB]
- Fetched 10.5 MB in 1min 2s (168 kB/s)
- Reading package lists... Done
- W: There is no public key available for the following key IDs:
- 9D6D8F6BC857C906
- W: There is no public key available for the following key IDs:
- 7638D0442B90D010
- root@debian:~# apt-get upgrade
- Reading package lists... Done
- Building dependency tree
- Reading state information... Done
- The following packages will be upgraded:
- apt apt-utils base-files bash bind9-host cpio dbus debian-archive-keyring
- dpkg e2fslibs e2fsprogs gnupg gpgv isc-dhcp-client isc-dhcp-common
- libapt-inst1.5 libapt-pkg4.12 libbind9-80 libc-bin libc6 libcomerr2
- libdbus-1-3 libdns88 libevent-2.0-5 libexpat1 libgcrypt11 libgnutls26
- libgssapi-krb5-2 libidn11 libisc84 libisccc80 libisccfg82 libk5crypto3
- libkeyutils1 libkrb5-3 libkrb5support0 libldap-2.4-2 liblwres80 libss2
- libssl1.0.0 libsystemd-login0 libtasn1-3 libxml2 multiarch-support ntp
- ntpdate openssh-client openssh-server perl-base rpcbind tar tzdata
- vim-common vim-tiny wget
- 55 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
- Need to get 29.4 MB of archives.
- After this operation, 4195 kB disk space will be freed.
- Do you want to continue [Y/n]? y
- Get:1 http://security.debian.org/ wheezy/updates/main bash armel 4.2+dfsg-0.1+deb7u4 [1441 kB]
- Get:2 http://ftp.us.debian.org/debian/ wheezy/main base-files armel 7.1wheezy11 [67.1 kB]
- Get:3 http://ftp.us.debian.org/debian/ wheezy/main dpkg armel 1.16.18 [2600 kB]
- Get:4 http://security.debian.org/ wheezy/updates/main libc-bin armel 2.13-38+deb7u11 [1211 kB]
- Get:5 http://security.debian.org/ wheezy/updates/main libc6 armel 2.13-38+deb7u11 [4100 kB]
- Get:6 http://ftp.us.debian.org/debian/ wheezy/main e2fslibs armel 1.42.5-1.1+deb7u1 [187 kB]
- Get:7 http://ftp.us.debian.org/debian/ wheezy/main e2fsprogs armel 1.42.5-1.1+deb7u1 [996 kB]
- Get:8 http://ftp.us.debian.org/debian/ wheezy/main libapt-pkg4.12 armel 0.9.7.9+deb7u7 [872 kB]
- Get:9 http://ftp.us.debian.org/debian/ wheezy/main debian-archive-keyring all 2014.3~deb7u1 [60.7 kB]
- Get:10 http://ftp.us.debian.org/debian/ wheezy/main apt armel 0.9.7.9+deb7u7 [1249 kB]
- Get:11 http://ftp.us.debian.org/debian/ wheezy/main libcomerr2 armel 1.42.5-1.1+deb7u1 [54.9 kB]
- Get:12 http://ftp.us.debian.org/debian/ wheezy/main libss2 armel 1.42.5-1.1+deb7u1 [59.2 kB]
- Get:13 http://ftp.us.debian.org/debian/ wheezy/main libapt-inst1.5 armel 0.9.7.9+deb7u7 [165 kB]
- Get:14 http://ftp.us.debian.org/debian/ wheezy/main libevent-2.0-5 armel 2.0.19-stable-3+deb7u1 [158 kB]
- Get:15 http://ftp.us.debian.org/debian/ wheezy/main libgnutls26 armel 2.12.20-8+deb7u5 [596 kB]
- Get:16 http://ftp.us.debian.org/debian/ wheezy/main libkeyutils1 armel 1.5.5-3+deb7u1 [7872 B]
- Get:17 http://ftp.us.debian.org/debian/ wheezy/main libk5crypto3 armel 1.10.1+dfsg-5+deb7u7 [111 kB]
- Get:18 http://ftp.us.debian.org/debian/ wheezy/main libgssapi-krb5-2 armel 1.10.1+dfsg-5+deb7u7 [133 kB]
- Get:19 http://ftp.us.debian.org/debian/ wheezy/main libkrb5-3 armel 1.10.1+dfsg-5+deb7u7 [342 kB]
- Get:20 http://ftp.us.debian.org/debian/ wheezy/main libkrb5support0 armel 1.10.1+dfsg-5+deb7u7 [47.0 kB]
- Get:21 http://ftp.us.debian.org/debian/ wheezy/main libldap-2.4-2 armel 2.4.31-2+deb7u2 [217 kB]
- Get:22 http://ftp.us.debian.org/debian/ wheezy/main libdbus-1-3 armel 1.6.8-1+deb7u6 [155 kB]
- Get:23 http://ftp.us.debian.org/debian/ wheezy/main apt-utils armel 0.9.7.9+deb7u7 [376 kB]
- Get:24 http://ftp.us.debian.org/debian/ wheezy/main cpio armel 2.11+dfsg-0.1+deb7u2 [259 kB]
- Get:25 http://ftp.us.debian.org/debian/ wheezy/main isc-dhcp-client armel 4.2.2.dfsg.1-5+deb70u8 [742 kB]
- Get:26 http://ftp.us.debian.org/debian/ wheezy/main isc-dhcp-common armel 4.2.2.dfsg.1-5+deb70u8 [803 kB]
- Get:27 http://ftp.us.debian.org/debian/ wheezy/main rpcbind armel 0.2.0-8+deb7u1 [42.8 kB]
- Get:28 http://ftp.us.debian.org/debian/ wheezy/main dbus armel 1.6.8-1+deb7u6 [357 kB]
- Get:29 http://security.debian.org/ wheezy/updates/main perl-base armel 5.14.2-21+deb7u4 [1473 kB]
- Get:30 http://security.debian.org/ wheezy/updates/main tar armel 1.26+dfsg-0.1+deb7u1 [968 kB]
- Get:31 http://security.debian.org/ wheezy/updates/main gpgv armel 1.4.12-7+deb7u8 [208 kB]
- Get:32 http://security.debian.org/ wheezy/updates/main gnupg armel 1.4.12-7+deb7u8 [1901 kB]
- Get:33 http://security.debian.org/ wheezy/updates/main libgcrypt11 armel 1.5.0-5+deb7u5 [302 kB]
- Get:34 http://security.debian.org/ wheezy/updates/main libssl1.0.0 armel 1.0.1t-1+deb7u1 [1072 kB]
- Get:35 http://security.debian.org/ wheezy/updates/main libtasn1-3 armel 2.13-2+deb7u3 [63.9 kB]
- Get:36 http://security.debian.org/ wheezy/updates/main libidn11 armel 1.25-2+deb7u2 [176 kB]
- Get:37 http://security.debian.org/ wheezy/updates/main libexpat1 armel 2.1.0-1+deb7u4 [117 kB]
- Get:38 http://security.debian.org/ wheezy/updates/main libxml2 armel 2.8.0+dfsg1-7+wheezy7 [829 kB]
- Get:39 http://security.debian.org/ wheezy/updates/main ntp armel 1:4.2.6.p5+dfsg-2+deb7u7 [541 kB]
- Get:40 http://security.debian.org/ wheezy/updates/main ntpdate armel 1:4.2.6.p5+dfsg-2+deb7u7 [81.3 kB]
- Get:41 http://security.debian.org/ wheezy/updates/main libsystemd-login0 armel 44-11+deb7u5 [28.6 kB]
- Get:42 http://security.debian.org/ wheezy/updates/main tzdata all 2016i-0+deb7u1 [461 kB]
- Get:43 http://security.debian.org/ wheezy/updates/main multiarch-support armel 2.13-38+deb7u11 [152 kB]
- Get:44 http://security.debian.org/ wheezy/updates/main vim-tiny armel 2:7.3.547-7+deb7u1 [280 kB]
- Get:45 http://security.debian.org/ wheezy/updates/main vim-common armel 2:7.3.547-7+deb7u1 [162 kB]
- Get:46 http://security.debian.org/ wheezy/updates/main wget armel 1.13.4-3+deb7u3 [755 kB]
- Get:47 http://security.debian.org/ wheezy/updates/main bind9-host armel 1:9.8.4.dfsg.P1-6+nmu2+deb7u13 [71.8 kB]
- Get:48 http://security.debian.org/ wheezy/updates/main libisc84 armel 1:9.8.4.dfsg.P1-6+nmu2+deb7u13 [169 kB]
- Get:49 http://security.debian.org/ wheezy/updates/main libdns88 armel 1:9.8.4.dfsg.P1-6+nmu2+deb7u13 [710 kB]
- Get:50 http://security.debian.org/ wheezy/updates/main libisccc80 armel 1:9.8.4.dfsg.P1-6+nmu2+deb7u13 [34.4 kB]
- Get:51 http://security.debian.org/ wheezy/updates/main libisccfg82 armel 1:9.8.4.dfsg.P1-6+nmu2+deb7u13 [56.0 kB]
- Get:52 http://security.debian.org/ wheezy/updates/main libbind9-80 armel 1:9.8.4.dfsg.P1-6+nmu2+deb7u13 [42.0 kB]
- Get:53 http://security.debian.org/ wheezy/updates/main liblwres80 armel 1:9.8.4.dfsg.P1-6+nmu2+deb7u13 [52.4 kB]
- Get:54 http://security.debian.org/ wheezy/updates/main openssh-server armel 1:6.0p1-4+deb7u6 [317 kB]
- Get:55 http://security.debian.org/ wheezy/updates/main openssh-client armel 1:6.0p1-4+deb7u6 [961 kB]
- Fetched 29.4 MB in 25s (1141 kB/s)
- Extracting templates from packages: 100%
- Preconfiguring packages ...
- (Reading database ... 11630 files and directories currently installed.)
- Preparing to replace base-files 7.1wheezy4 (using .../base-files_7.1wheezy11_armel.deb) ...
- Unpacking replacement base-files ...
- Processing triggers for man-db ...
- Setting up base-files (7.1wheezy11) ...
- Installing new version of config file /etc/debian_version ...
- (Reading database ... 11630 files and directories currently installed.)
- Preparing to replace bash 4.2+dfsg-0.1 (using .../bash_4.2+dfsg-0.1+deb7u4_armel.deb) ...
- Unpacking replacement bash ...
- Processing triggers for man-db ...
- Setting up bash (4.2+dfsg-0.1+deb7u4) ...
- update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
- (Reading database ... 11630 files and directories currently installed.)
- Preparing to replace dpkg 1.16.12 (using .../dpkg_1.16.18_armel.deb) ...
- Unpacking replacement dpkg ...
- Processing triggers for man-db ...
- Setting up dpkg (1.16.18) ...
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace libc-bin 2.13-38+deb7u1 (using .../libc-bin_2.13-38+deb7u11_armel.deb) ...
- Unpacking replacement libc-bin ...
- Processing triggers for man-db ...
- Setting up libc-bin (2.13-38+deb7u11) ...
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace libc6:armel 2.13-38+deb7u1 (using .../libc6_2.13-38+deb7u11_armel.deb) ...
- Unpacking replacement libc6:armel ...
- Setting up libc6:armel (2.13-38+deb7u11) ...
- INIT: version 2.88 reloading
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace e2fslibs:armel 1.42.5-1.1 (using .../e2fslibs_1.42.5-1.1+deb7u1_armel.deb) ...
- Unpacking replacement e2fslibs:armel ...
- Setting up e2fslibs:armel (1.42.5-1.1+deb7u1) ...
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace e2fsprogs 1.42.5-1.1 (using .../e2fsprogs_1.42.5-1.1+deb7u1_armel.deb) ...
- Unpacking replacement e2fsprogs ...
- Processing triggers for man-db ...
- Setting up e2fsprogs (1.42.5-1.1+deb7u1) ...
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace perl-base 5.14.2-21+deb7u1 (using .../perl-base_5.14.2-21+deb7u4_armel.deb) ...
- Unpacking replacement perl-base ...
- Processing triggers for man-db ...
- Setting up perl-base (5.14.2-21+deb7u4) ...
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace tar 1.26+dfsg-0.1 (using .../tar_1.26+dfsg-0.1+deb7u1_armel.deb) ...
- Unpacking replacement tar ...
- Processing triggers for man-db ...
- Setting up tar (1.26+dfsg-0.1+deb7u1) ...
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace libapt-pkg4.12:armel 0.9.7.9+deb7u1 (using .../libapt-pkg4.12_0.9.7.9+deb7u7_armel.deb) ...
- Unpacking replacement libapt-pkg4.12:armel ...
- Setting up libapt-pkg4.12:armel (0.9.7.9+deb7u7) ...
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace gpgv 1.4.12-7+deb7u3 (using .../gpgv_1.4.12-7+deb7u8_armel.deb) ...
- Unpacking replacement gpgv ...
- Processing triggers for man-db ...
- Setting up gpgv (1.4.12-7+deb7u8) ...
- (Reading database ... 11631 files and directories currently installed.)
- Preparing to replace debian-archive-keyring 2012.4 (using .../debian-archive-keyring_2014.3~deb7u1_all.deb) ...
- Unpacking replacement debian-archive-keyring ...
- Setting up debian-archive-keyring (2014.3~deb7u1) ...
- (Reading database ... 11634 files and directories currently installed.)
- Preparing to replace gnupg 1.4.12-7+deb7u3 (using .../gnupg_1.4.12-7+deb7u8_armel.deb) ...
- Unpacking replacement gnupg ...
- Processing triggers for man-db ...
- Setting up gnupg (1.4.12-7+deb7u8) ...
- (Reading database ... 11634 files and directories currently installed.)
- Preparing to replace apt 0.9.7.9+deb7u1 (using .../apt_0.9.7.9+deb7u7_armel.deb) ...
- Unpacking replacement apt ...
- Processing triggers for man-db ...
- Setting up apt (0.9.7.9+deb7u7) ...
- gpg: key B98321F9: "Squeeze Stable Release Key <debian-release@lists.debian.org>" not changed
- gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster@debian.org>" not changed
- gpg: key 65FFB764: "Wheezy Stable Release Key <debian-release@lists.debian.org>" not changed
- gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) <ftpmaster@debian.org>" not changed
- gpg: key 518E17E1: "Jessie Stable Release Key <debian-release@lists.debian.org>" not changed
- gpg: key 2B90D010: "Debian Archive Automatic Signing Key (8/jessie) <ftpmaster@debian.org>" not changed
- gpg: key C857C906: "Debian Security Archive Automatic Signing Key (8/jessie) <ftpmaster@debian.org>" not changed
- gpg: Total number processed: 7
- gpg: unchanged: 7
- (Reading database ... 11634 files and directories currently installed.)
- Preparing to replace libcomerr2:armel 1.42.5-1.1 (using .../libcomerr2_1.42.5-1.1+deb7u1_armel.deb) ...
- Unpacking replacement libcomerr2:armel ...
- Setting up libcomerr2:armel (1.42.5-1.1+deb7u1) ...
- (Reading database ... 11634 files and directories currently installed.)
- Preparing to replace libss2:armel 1.42.5-1.1 (using .../libss2_1.42.5-1.1+deb7u1_armel.deb) ...
- Unpacking replacement libss2:armel ...
- Setting up libss2:armel (1.42.5-1.1+deb7u1) ...
- (Reading database ... 11634 files and directories currently installed.)
- Preparing to replace libapt-inst1.5:armel 0.9.7.9+deb7u1 (using .../libapt-inst1.5_0.9.7.9+deb7u7_armel.deb) ...
- Unpacking replacement libapt-inst1.5:armel ...
- Preparing to replace libgcrypt11:armel 1.5.0-5+deb7u1 (using .../libgcrypt11_1.5.0-5+deb7u5_armel.deb) ...
- Unpacking replacement libgcrypt11:armel ...
- Preparing to replace libssl1.0.0:armel 1.0.1e-2+deb7u6 (using .../libssl1.0.0_1.0.1t-1+deb7u1_armel.deb) ...
- Unpacking replacement libssl1.0.0:armel ...
- Preparing to replace libtasn1-3:armel 2.13-2 (using .../libtasn1-3_2.13-2+deb7u3_armel.deb) ...
- Unpacking replacement libtasn1-3:armel ...
- Preparing to replace libevent-2.0-5:armel 2.0.19-stable-3 (using .../libevent-2.0-5_2.0.19-stable-3+deb7u1_armel.deb) ...
- Unpacking replacement libevent-2.0-5:armel ...
- Preparing to replace libgnutls26:armel 2.12.20-8+deb7u1 (using .../libgnutls26_2.12.20-8+deb7u5_armel.deb) ...
- Unpacking replacement libgnutls26:armel ...
- Preparing to replace libkeyutils1:armel 1.5.5-3 (using .../libkeyutils1_1.5.5-3+deb7u1_armel.deb) ...
- Unpacking replacement libkeyutils1:armel ...
- Preparing to replace libk5crypto3:armel 1.10.1+dfsg-5+deb7u1 (using .../libk5crypto3_1.10.1+dfsg-5+deb7u7_armel.deb) ...
- Unpacking replacement libk5crypto3:armel ...
- Preparing to replace libgssapi-krb5-2:armel 1.10.1+dfsg-5+deb7u1 (using .../libgssapi-krb5-2_1.10.1+dfsg-5+deb7u7_armel.deb) ...
- Unpacking replacement libgssapi-krb5-2:armel ...
- Preparing to replace libkrb5-3:armel 1.10.1+dfsg-5+deb7u1 (using .../libkrb5-3_1.10.1+dfsg-5+deb7u7_armel.deb) ...
- Unpacking replacement libkrb5-3:armel ...
- Preparing to replace libkrb5support0:armel 1.10.1+dfsg-5+deb7u1 (using .../libkrb5support0_1.10.1+dfsg-5+deb7u7_armel.deb) ...
- Unpacking replacement libkrb5support0:armel ...
- Preparing to replace libidn11:armel 1.25-2 (using .../libidn11_1.25-2+deb7u2_armel.deb) ...
- Unpacking replacement libidn11:armel ...
- Preparing to replace libldap-2.4-2:armel 2.4.31-1+nmu2 (using .../libldap-2.4-2_2.4.31-2+deb7u2_armel.deb) ...
- Unpacking replacement libldap-2.4-2:armel ...
- Preparing to replace libdbus-1-3:armel 1.6.8-1+deb7u1 (using .../libdbus-1-3_1.6.8-1+deb7u6_armel.deb) ...
- Unpacking replacement libdbus-1-3:armel ...
- Preparing to replace libexpat1:armel 2.1.0-1+deb7u1 (using .../libexpat1_2.1.0-1+deb7u4_armel.deb) ...
- Unpacking replacement libexpat1:armel ...
- Preparing to replace libxml2:armel 2.8.0+dfsg1-7+nmu2 (using .../libxml2_2.8.0+dfsg1-7+wheezy7_armel.deb) ...
- Unpacking replacement libxml2:armel ...
- Preparing to replace ntp 1:4.2.6.p5+dfsg-2 (using .../ntp_1%3a4.2.6.p5+dfsg-2+deb7u7_armel.deb) ...
- [....] Stopping NTP server: ntpdstart-stop-daemon: warning: failed to kill 1819: No such process
- . ok
- Unpacking replacement ntp ...
- Preparing to replace ntpdate 1:4.2.6.p5+dfsg-2 (using .../ntpdate_1%3a4.2.6.p5+dfsg-2+deb7u7_armel.deb) ...
- Unpacking replacement ntpdate ...
- Preparing to replace libsystemd-login0:armel 44-11+deb7u4 (using .../libsystemd-login0_44-11+deb7u5_armel.deb) ...
- Unpacking replacement libsystemd-login0:armel ...
- Preparing to replace tzdata 2013i-0wheezy1 (using .../tzdata_2016i-0+deb7u1_all.deb) ...
- Unpacking replacement tzdata ...
- Processing triggers for man-db ...
- Setting up tzdata (2016i-0+deb7u1) ...
- Current default time zone: 'SystemV/PST8PDT'
- Local time is now: Sat Nov 26 15:31:56 PST 2016.
- Universal Time is now: Sat Nov 26 23:31:56 UTC 2016.
- Run 'dpkg-reconfigure tzdata' if you wish to change it.
- (Reading database ... 11670 files and directories currently installed.)
- Preparing to replace multiarch-support 2.13-38+deb7u1 (using .../multiarch-support_2.13-38+deb7u11_armel.deb) ...
- Unpacking replacement multiarch-support ...
- Setting up multiarch-support (2.13-38+deb7u11) ...
- (Reading database ... 11670 files and directories currently installed.)
- Preparing to replace apt-utils 0.9.7.9+deb7u1 (using .../apt-utils_0.9.7.9+deb7u7_armel.deb) ...
- Unpacking replacement apt-utils ...
- Preparing to replace cpio 2.11+dfsg-0.1 (using .../cpio_2.11+dfsg-0.1+deb7u2_armel.deb) ...
- Unpacking replacement cpio ...
- Preparing to replace isc-dhcp-client 4.2.2.dfsg.1-5+deb70u6 (using .../isc-dhcp-client_4.2.2.dfsg.1-5+deb70u8_armel.deb) ...
- Unpacking replacement isc-dhcp-client ...
- Preparing to replace isc-dhcp-common 4.2.2.dfsg.1-5+deb70u6 (using .../isc-dhcp-common_4.2.2.dfsg.1-5+deb70u8_armel.deb) ...
- Unpacking replacement isc-dhcp-common ...
- Preparing to replace vim-tiny 2:7.3.547-7 (using .../vim-tiny_2%3a7.3.547-7+deb7u1_armel.deb) ...
- Unpacking replacement vim-tiny ...
- Preparing to replace vim-common 2:7.3.547-7 (using .../vim-common_2%3a7.3.547-7+deb7u1_armel.deb) ...
- Unpacking replacement vim-common ...
- Preparing to replace wget 1.13.4-3+deb7u1 (using .../wget_1.13.4-3+deb7u3_armel.deb) ...
- Unpacking replacement wget ...
- Preparing to replace bind9-host 1:9.8.4.dfsg.P1-6+nmu2+deb7u1 (using .../bind9-host_1%3a9.8.4.dfsg.P1-6+nmu2+deb7u13_armel.deb) ...
- Unpacking replacement bind9-host ...
- Preparing to replace libisc84 1:9.8.4.dfsg.P1-6+nmu2+deb7u1 (using .../libisc84_1%3a9.8.4.dfsg.P1-6+nmu2+deb7u13_armel.deb) ...
- Unpacking replacement libisc84 ...
- Preparing to replace libdns88 1:9.8.4.dfsg.P1-6+nmu2+deb7u1 (using .../libdns88_1%3a9.8.4.dfsg.P1-6+nmu2+deb7u13_armel.deb) ...
- Unpacking replacement libdns88 ...
- Preparing to replace libisccc80 1:9.8.4.dfsg.P1-6+nmu2+deb7u1 (using .../libisccc80_1%3a9.8.4.dfsg.P1-6+nmu2+deb7u13_armel.deb) ...
- Unpacking replacement libisccc80 ...
- Preparing to replace libisccfg82 1:9.8.4.dfsg.P1-6+nmu2+deb7u1 (using .../libisccfg82_1%3a9.8.4.dfsg.P1-6+nmu2+deb7u13_armel.deb) ...
- Unpacking replacement libisccfg82 ...
- Preparing to replace libbind9-80 1:9.8.4.dfsg.P1-6+nmu2+deb7u1 (using .../libbind9-80_1%3a9.8.4.dfsg.P1-6+nmu2+deb7u13_armel.deb) ...
- Unpacking replacement libbind9-80 ...
- Preparing to replace liblwres80 1:9.8.4.dfsg.P1-6+nmu2+deb7u1 (using .../liblwres80_1%3a9.8.4.dfsg.P1-6+nmu2+deb7u13_armel.deb) ...
- Unpacking replacement liblwres80 ...
- Preparing to replace openssh-server 1:6.0p1-4+deb7u1 (using .../openssh-server_1%3a6.0p1-4+deb7u6_armel.deb) ...
- Unpacking replacement openssh-server ...
- Preparing to replace openssh-client 1:6.0p1-4+deb7u1 (using .../openssh-client_1%3a6.0p1-4+deb7u6_armel.deb) ...
- Unpacking replacement openssh-client ...
- Preparing to replace rpcbind 0.2.0-8 (using .../rpcbind_0.2.0-8+deb7u1_armel.deb) ...
- [ ok ] Stopping rpcbind daemon....
- Unpacking replacement rpcbind ...
- Preparing to replace dbus 1.6.8-1+deb7u1 (using .../dbus_1.6.8-1+deb7u6_armel.deb) ...
- Unpacking replacement dbus ...
- Processing triggers for man-db ...
- Setting up libapt-inst1.5:armel (0.9.7.9+deb7u7) ...
- Setting up libgcrypt11:armel (1.5.0-5+deb7u5) ...
- Setting up libssl1.0.0:armel (1.0.1t-1+deb7u1) ...
- Checking for services that may need to be restarted...done.
- Setting up libtasn1-3:armel (2.13-2+deb7u3) ...
- Setting up libevent-2.0-5:armel (2.0.19-stable-3+deb7u1) ...
- Setting up libgnutls26:armel (2.12.20-8+deb7u5) ...
- Setting up libkeyutils1:armel (1.5.5-3+deb7u1) ...
- Setting up libkrb5support0:armel (1.10.1+dfsg-5+deb7u7) ...
- Setting up libk5crypto3:armel (1.10.1+dfsg-5+deb7u7) ...
- Setting up libkrb5-3:armel (1.10.1+dfsg-5+deb7u7) ...
- Setting up libgssapi-krb5-2:armel (1.10.1+dfsg-5+deb7u7) ...
- Setting up libidn11:armel (1.25-2+deb7u2) ...
- Setting up libldap-2.4-2:armel (2.4.31-2+deb7u2) ...
- Setting up libdbus-1-3:armel (1.6.8-1+deb7u6) ...
- Setting up libexpat1:armel (2.1.0-1+deb7u4) ...
- Setting up libxml2:armel (2.8.0+dfsg1-7+wheezy7) ...
- Setting up ntp (1:4.2.6.p5+dfsg-2+deb7u7) ...
- [ ok ] Starting NTP server: ntpd.
- Setting up ntpdate (1:4.2.6.p5+dfsg-2+deb7u7) ...
- Setting up libsystemd-login0:armel (44-11+deb7u5) ...
- Setting up apt-utils (0.9.7.9+deb7u7) ...
- Setting up cpio (2.11+dfsg-0.1+deb7u2) ...
- Setting up isc-dhcp-common (4.2.2.dfsg.1-5+deb70u8) ...
- Setting up isc-dhcp-client (4.2.2.dfsg.1-5+deb70u8) ...
- Setting up vim-common (2:7.3.547-7+deb7u1) ...
- Setting up vim-tiny (2:7.3.547-7+deb7u1) ...
- Setting up wget (1.13.4-3+deb7u3) ...
- Setting up libisc84 (1:9.8.4.dfsg.P1-6+nmu2+deb7u13) ...
- Setting up libdns88 (1:9.8.4.dfsg.P1-6+nmu2+deb7u13) ...
- Setting up libisccc80 (1:9.8.4.dfsg.P1-6+nmu2+deb7u13) ...
- Setting up libisccfg82 (1:9.8.4.dfsg.P1-6+nmu2+deb7u13) ...
- Setting up libbind9-80 (1:9.8.4.dfsg.P1-6+nmu2+deb7u13) ...
- Setting up liblwres80 (1:9.8.4.dfsg.P1-6+nmu2+deb7u13) ...
- Setting up bind9-host (1:9.8.4.dfsg.P1-6+nmu2+deb7u13) ...
- Setting up openssh-client (1:6.0p1-4+deb7u6) ...
- Setting up openssh-server (1:6.0p1-4+deb7u6) ...
- [ ok ] Restarting OpenBSD Secure Shell server: sshd.
- Setting up rpcbind (0.2.0-8+deb7u1) ...
- [ ok ] Starting rpcbind daemon....
- Setting up dbus (1.6.8-1+deb7u6) ...
- Installing new version of config file /etc/init.d/dbus ...
- Installing new version of config file /etc/dbus-1/system.conf ...
- Installing new version of config file /etc/dbus-1/session.conf ...
- [ ok ] system message bus already started; not starting..
- root@debian:~# version
- -bash: version: command not found
- root@debian:~# cd /boot
- root@debian:/boot# mkdir backup
- root@debian:/boot# mv *3.14* backup
- tps://www.dropbox.com/s/e8hm8fg
- tps://www.dropbox.com/s/e8hm8fg: Unsupported scheme `tps'.
- tps://www.dropbox.com/s/e8hm8fg
- tps://www.dropbox.com/s/e8hm8fg: Unsupported scheme `tps'.
- opbox.com/s/e8hm8fg tps://www.dr
- -bash: tps://www.dropbox.com/s/e8hm8fg: No such file or directory
- opbox.com/s/e8hm8fg tps://www.dr
- -bash: tps://www.dropbox.com/s/e8hm8fg: No such file or directory
- opbox.com/s/e8hm8fg tps://www.dr
- -bash: tps://www.dropbox.com/s/e8hm8fg: No such file or directory
- opbox.com/s/e8hm8fg tps://www.dr
- -bash: tps://www.dropbox.com/s/e8hm8fg: No such file or directory
- opbox.com/s/e8hm8fg tps://www.dr
- -bash: tps://www.dropbox.com/s/e8hm8fg: No such file or directory
- opbox.com/s/e8hm8fg tps://www.dr
- -bash: tps://www.dropbox.com/s/e8hm8fg: No such file or directory
- opbox.com/s/e8hm8fg tps://www.dr
- -bash: tps://www.dropbox.com/s/e8hm8fg: No such file or directory
- ugivxy86/linux-4.8.3-kirkwood-tld-1-bodhi.tar.bz2#ps://www.dropbox.com/s/e8hm8fg
- --2016-11-26 15:42:02-- https://www.dropbox.com/s/e8hm8fgugivxy86/linux-4.8.3-kirkwood-tld-1-bodhi.tar.bz2
- Resolving www.dropbox.com (www.dropbox.com)... 162.125.1.1
- Connecting to www.dropbox.com (www.dropbox.com)|162.125.1.1|:443... connected.
- WARNING: The certificate of `www.dropbox.com' is not trusted.
- WARNING: The certificate of `www.dropbox.com' hasn't got a known issuer.
- HTTP request sent, awaiting response... 302 Found
- Location: https://dl.dropboxusercontent.com/content_link/0Y1cZSmcwVCu6ONKQAyRO7BaztYRwVY1VtdTIyJLH6wHbePIiwMQ8A79rhDVe7uF/file [following]
- --2016-11-26 15:42:03-- https://dl.dropboxusercontent.com/content_link/0Y1cZSmcwVCu6ONKQAyRO7BaztYRwVY1VtdTIyJLH6wHbePIiwMQ8A79rhDVe7uF/file
- Resolving dl.dropboxusercontent.com (dl.dropboxusercontent.com)... 108.160.172.69
- Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|108.160.172.69|:443... connected.
- WARNING: The certificate of `dl.dropboxusercontent.com' is not trusted.
- WARNING: The certificate of `dl.dropboxusercontent.com' hasn't got a known issuer.
- HTTP request sent, awaiting response... 200 OK
- Length: 29428516 (28M) [application/octet-stream]
- Saving to: `linux-4.8.3-kirkwood-tld-1-bodhi.tar.bz2'
- 100%[======================================>] 29,428,516 2.23M/s in 12s
- 2016-11-26 15:42:16 (2.29 MB/s) - `linux-4.8.3-kirkwood-tld-1-bodhi.tar.bz2' saved [29428516/29428516]
- root@debian:/boot# tar -xvjf linux-3.18.5-kirkwood-tld-1-bodhi.tar.bz2
- tar (child): linux-3.18.5-kirkwood-tld-1-bodhi.tar.bz2: Cannot open: No such file or directory
- tar (child): Error is not recoverable: exiting now
- tar: Child returned status 2
- tar: Error is not recoverable: exiting now
- root@debian:/boot# tar -xvjf linux-4.8.3-kirkwood-tld-1-bodhi.tar.bz2
- linux-image-4.8.3-kirkwood-tld-1_1.0_armel.deb
- linux-headers-4.8.3-kirkwood-tld-1_1.0_armel.deb
- config-4.8.3-kirkwood-tld-1
- zImage-4.8.3-kirkwood-tld-1
- linux-dtb-4.8.3-kirkwood-tld-1.tar
- linux-4.8.3-kirkwood-tld-1.patch
- root@debian:/boot# tar -xvf linux-4.8.3-kirkwood-tld-1-bodhi.tar.bz2
- linux-image-4.8.3-kirkwood-tld-1_1.0_armel.deb
- linux-headers-4.8.3-kirkwood-tld-1_1.0_armel.deb
- config-4.8.3-kirkwood-tld-1
- zImage-4.8.3-kirkwood-tld-1
- linux-dtb-4.8.3-kirkwood-tld-1.tar
- linux-4.8.3-kirkwood-tld-1.patch
- root@debian:/boot# tar -xvf linux-4.8.3-kirkwood-tld-1-bodhi.tar
- tar: linux-4.8.3-kirkwood-tld-1-bodhi.tar: Cannot open: No such file or directory
- tar: Error is not recoverable: exiting now
- root@debian:/boot# dpkg -i linux-4.8.3-kirkwood-tld-1_1_armel.deb
- dpkg: error processing linux-4.8.3-kirkwood-tld-1_1_armel.deb (--install):
- cannot access archive: No such file or directory
- Errors were encountered while processing:
- linux-4.8.3-kirkwood-tld-1_1_armel.deb
- root@debian:/boot# dpkg -i linux-4.8.3-kirkwood-tld-1_1_armel.deb
- dpkg: error processing linux-4.8.3-kirkwood-tld-1_1_armel.deb (--install):
- cannot access archive: No such file or directory
- Errors were encountered while processing:
- linux-4.8.3-kirkwood-tld-1_1_armel.deb
- root@debian:/boot# tar -xvjf linux-4.8.3-kirkwood-tld-1-bodhi.tar.bz2
- linux-image-4.8.3-kirkwood-tld-1_1.0_armel.deb
- linux-headers-4.8.3-kirkwood-tld-1_1.0_armel.deb
- config-4.8.3-kirkwood-tld-1
- zImage-4.8.3-kirkwood-tld-1
- linux-dtb-4.8.3-kirkwood-tld-1.tar
- linux-4.8.3-kirkwood-tld-1.patch
- root@debian:/boot# tar -xvf linux-dtb-4.8.3-kirkwood-tld-1.tar
- dts/
- dts/kirkwood-lschlv2.dtb
- dts/kirkwood-nsa320s.dtb
- dts/kirkwood-ds112.dtb
- dts/kirkwood-qizhitong_501m_v2.dtb
- dts/kirkwood-dir665.dtb
- dts/kirkwood-t5325.dtb
- dts/kirkwood-rd88f6281-z0.dtb
- dts/kirkwood-db-88f6281.dtb
- dts/kirkwood-nsa325.dtb
- dts/kirkwood-cloudbox.dtb
- dts/kirkwood-d2net.dtb
- dts/kirkwood-dns320.dtb
- dts/kirkwood-linksys-viper.dtb
- dts/kirkwood-mv88f6281gtw-ge.dtb
- dts/kirkwood-netgear_readynas_nv+_v2.dtb
- dts/kirkwood-lsxhl.dtb
- dts/kirkwood-nsa320.dtb
- dts/kirkwood-dockstar.dtb
- dts/kirkwood-linkstation-lsqvl.dtb
- dts/kirkwood-topkick.dtb
- dts/kirkwood-laplug.dtb
- dts/kirkwood-ts219-6282.dtb
- dts/kirkwood-dns325.dtb
- dts/kirkwood-b3.dtb
- dts/kirkwood-is2.dtb
- dts/kirkwood-iomega_ix2_200.dtb
- dts/kirkwood-ds210.dtb
- dts/kirkwood-openblocks_a6.dtb
- dts/kirkwood-ds411j.dtb
- dts/kirkwood-dreamplug.dtb
- dts/kirkwood-ts419-6282.dtb
- dts/kirkwood-ds409slim.dtb
- dts/kirkwood-n1t1.dtb
- dts/kirkwood-goflexnet.dtb
- dts/kirkwood-nsa310b-lmsensor-redusbled.dtb
- dts/kirkwood-rd88f6192.dtb
- dts/kirkwood-ds409.dtb
- dts/kirkwood-ns2lite.dtb
- dts/kirkwood-openrd-ultimate.dtb
- dts/kirkwood-linkstation-lsvl.dtb
- dts/kirkwood-guruplug-server-plus.dtb
- dts/kirkwood-net2big.dtb
- dts/kirkwood-ds411slim.dtb
- dts/kirkwood-openblocks_a7.dtb
- dts/kirkwood-nsa310a.dtb
- dts/kirkwood-ns2.dtb
- dts/kirkwood-blackarmor-nas220.dtb
- dts/kirkwood-ib62x0.dtb
- dts/kirkwood-mplcec4.dtb
- dts/kirkwood-sheevaplug.dtb
- dts/kirkwood-ea4500-dsa.dtb
- dts/kirkwood-ds110jv10.dtb
- dts/kirkwood-rs409.dtb
- dts/kirkwood-pogo_e02.dtb
- dts/kirkwood-ds111.dtb
- dts/kirkwood-netgear_stora_ms2000.dtb
- dts/kirkwood-ds212j.dtb
- dts/kirkwood-rs212.dtb
- dts/kirkwood-ns2mini.dtb
- dts/kirkwood-iconnect.dtb
- dts/kirkwood-rs411.dtb
- dts/kirkwood-ds212.dtb
- dts/kirkwood-asus_m25.dtb
- dts/kirkwood-net5big.dtb
- dts/kirkwood-nas2big.dtb
- dts/kirkwood-linkstation-lswxl.dtb
- dts/kirkwood-netgear_readynas_duo_v2.dtb
- dts/kirkwood-ns2max.dtb
- dts/kirkwood-nsa310s.dtb
- dts/kirkwood-ts219-6281.dtb
- dts/kirkwood-linkstation-lswvl.dtb
- dts/kirkwood-db-88f6282.dtb
- dts/kirkwood-ts419-6281.dtb
- dts/kirkwood-linkstation-lswsxl.dtb
- dts/kirkwood-km_kirkwood.dtb
- dts/kirkwood-ds411.dtb
- dts/kirkwood-iomega_ix4_200d.dtb
- dts/kirkwood-sheevaplug-esata.dtb
- dts/kirkwood-rd88f6281-a.dtb
- dts/kirkwood-ds109.dtb
- dts/kirkwood-openrd-base.dtb
- dts/kirkwood-goflexhome.dtb
- dts/kirkwood-ea4500.dtb
- dts/kirkwood-pogoplug_v4.dtb
- dts/kirkwood-nsa310.dtb
- dts/kirkwood-openrd-client.dtb
- dts/kirkwood-ds209.dtb
- root@debian:/boot# dpkg -i linux-image-4.8.3-kirkwood-tld-1_1_armel.deb
- dpkg: error processing linux-image-4.8.3-kirkwood-tld-1_1_armel.deb (--install):
- cannot access archive: No such file or directory
- Errors were encountered while processing:
- linux-image-4.8.3-kirkwood-tld-1_1_armel.deb
- root@debian:/boot# cd /boot
- root@debian:/boot# apt-get remove flash-kernel
- Reading package lists... Done
- Building dependency tree
- Reading state information... Done
- Package 'flash-kernel' is not installed, so not removed
- 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
- root@debian:/boot# dpkg -i linux-image-4.8.3-kirkwood-tld-1_1.0_armel.deb
- Selecting previously unselected package linux-image-4.8.3-kirkwood-tld-1.
- (Reading database ... 11672 files and directories currently installed.)
- Unpacking linux-image-4.8.3-kirkwood-tld-1 (from linux-image-4.8.3-kirkwood-tld-1_1.0_armel.deb) ...
- Examining /etc/kernel/preinst.d/
- Done.
- Setting up linux-image-4.8.3-kirkwood-tld-1 (1.0) ...
- Hmm. There is a symbolic link /lib/modules/4.8.3-kirkwood-tld-1/build
- However, I can not read it: No such file or directory
- Therefore, I am deleting /lib/modules/4.8.3-kirkwood-tld-1/build
- Hmm. The package shipped with a symbolic link /lib/modules/4.8.3-kirkwood-tld-1/source
- However, I can not read the target: No such file or directory
- Therefore, I am deleting /lib/modules/4.8.3-kirkwood-tld-1/source
- Running depmod.
- Examining /etc/kernel/postinst.d.
- run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.8.3-kirkwood-tld-1 /boot/vmlinuz-4.8.3-kirkwood-tld-1
- update-initramfs: Generating /boot/initrd.img-4.8.3-kirkwood-tld-1
- run-parts: executing /etc/kernel/postinst.d/zz-flash-kernel 4.8.3-kirkwood-tld-1 /boot/vmlinuz-4.8.3-kirkwood-tld-1
- 00008000 -n Linux-4.8.3-kirkwood-tld-1 -d vmlinuz-4.8.3-kirkwood-tld-1 uImage 0x
- Image Name: Linux-4.8.3-kirkwood-tld-1
- Created: Sat Nov 26 15:57:49 2016
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3232304 Bytes = 3156.55 kB = 3.08 MB
- Load Address: 00008000
- Entry Point: 00008000
- Initrd000 -n initramfs-4.8.3-kirkwood-tld-1 -d initrd.img-4.8.3-kirkwood-tld-1 u
- Image Name: initramfs-4.8.3-kirkwood-tld-1
- Created: Sat Nov 26 15:58:20 2016
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 6531026 Bytes = 6377.96 kB = 6.23 MB
- Load Address: 00000000
- Entry Point: 00000000
- root@debian:/boot# sync
- root@debian:/boot# sync
- root@debian:/boot# sync
- root@debian:/boot# shutdown -r now
- Broadcast message from root@debian (ttyS0) (Sat Nov 26 15:58:41 2016):
- The system is going down for reboot NOW!
- INIT: Switching to runlevel: 6
- INIT: Sending processes the TERM[info] Using makefile-style concurrent boot in runlevel 6.
- [....] Stopping busybox' klogd implementation: klogd1679 (klogd)
- Stopped klogd (pid 1679).
- . ok
- [....] Stopping busybox' syslogd implementation: syslogd1681 (syslogd)
- . ok
- [ ok ] Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- [ ok ] Stopping NFS kernel daemon: mountd nfsd.
- [ ok ] Unexporting directories for NFS kernel daemon....
- [ ok ] Asking all remaining processes to terminate...done.
- [ ok ] All processes ended within 2 seconds...done.
- rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
- [ ok ] Stopping rpcbind daemon....
- [ ok ] Stopping NFS common utilities: idmapd statd.
- [....] Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
- Copyright 2004-2011 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- Listening on LPF/eth0/00:25:31:05:ca:0a
- Sending on LPF/eth0/00:25:31:05:ca:0a
- Sending on Socket/fallback
- DHCPRELEASE on eth0 to 192.168.0.1 port 67
- done.
- [ ok ] Unmounting temporary filesystems...done.
- [ ok ] Deactivating swap...done.
- [info] Will now restart.
- [ 2338.868806] reboot: Restarting system
- U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
- Pogoplug V4
- SoC: Kirkwood 88F6192_A1
- DRAM: 128 MiB
- WARNING: Caches not enabled
- NAND: 128 MiB
- MMC: kwsdio: 0
- In: serial
- Out: serial
- Err: serial
- Net: egiga0
- Hit any key to stop autoboot: 0
- MMC rescan: current device # 0 initialized OK
- 3232368 bytes read in 1327 ms (2.3 MiB/s)
- 6531090 bytes read in 2039 ms (3.1 MiB/s)
- ## Booting kernel from Legacy Image at 00800000 ...
- Image Name: Linux-4.8.3-kirkwood-tld-1
- Created: 2016-11-26 23:57:49 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3232304 Bytes = 3.1 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 01100000 ...
- Image Name: initramfs-4.8.3-kirkwood-tld-1
- Created: 2016-11-26 23:58:20 UTC
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 6531026 Bytes = 6.2 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Using machid 0xf78 from environment
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- Error: unrecognized/unsupported machine ID (r1 = 0x00000f78).
- Available machine support:
- ID (hex) NAME
- ffffffff Generic DT based system
- ffffffff Marvell Kirkwood (Flattened Device Tree)
- Please check your kernel config and/or bootloader.
Add Comment
Please, Sign In to add comment