SHARE
TWEET

Alley last_k_2

a guest Mar 2nd, 2013 42 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpu
  2.  
  3. [    0.000000] Linux version 3.1.10-DRH-FOSS-3.1+ (andrew@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #89 SMP PREEMPT Tue Feb 26 21:20:27 CST 2013
  4.  
  5. [    0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
  6.  
  7. [    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8.  
  9. [    0.000000] Machine: harmony
  10.  
  11. [    0.000000] Appending nvmem onto bank 0
  12.  
  13. [    0.000000] Tegra reserved memory:
  14.  
  15. [    0.000000] LP0:                    1fd76ff0 - 1fd78fef
  16.  
  17. [    0.000000] Bootloader framebuffer: 1fd95000 - 1ffedfff
  18.  
  19. [    0.000000] Framebuffer:            16800000 - 16ffffff
  20.  
  21. [    0.000000] 2nd Framebuffer:        17000000 - 17ffffff
  22.  
  23. [    0.000000] Carveout:               18000000 - 1fffffff
  24.  
  25. [    0.000000] Vpr:                    00000000 - 00000000
  26.  
  27. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  28.  
  29. [    0.000000] Tegra SKU: 8 Rev: A03 CPU Process: 1 Core Process: 1 Speedo ID: 1
  30.  
  31. [    0.000000] Tegra Revision: A03 SKU: 0x8 CPU Process: 1 Core Process: 1
  32.  
  33. [    0.000000] L310 cache controller enabled
  34.  
  35. [    0.000000] l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  36.  
  37. [    0.000000] PERCPU: Embedded 8 pages/cpu @c0e32000 s10304 r8192 d14272 u32768
  38.  
  39. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 90880
  40.  
  41. [    0.000000] Kernel command line: zcache mem=448M@0M nvmem=64M@448M vmalloc=192M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 cpuid=200102 devicetype=1002 bspversion=0202100907 btmac=9c5ed6131a00 tegraboot=nand mtdparts=tegra_nand:16384K@12032K(misc),16384K@62208K(recovery),16384K@79232K(boot),410752K@113024K(system),16384K@96128K(cache),4096K@7424K(bootbmp),32768K@28928K(logodata)
  42.  
  43. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  44.  
  45. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  46.  
  47. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  48.  
  49. [    0.000000] Memory: 359MB = 359MB total
  50.  
  51. [    0.000000] Memory: 352428k/352428k available, 171860k reserved, 0K highmem
  52.  
  53. [    0.000000] Virtual kernel memory layout:
  54.  
  55. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  56.  
  57. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  58.  
  59. [    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
  60.  
  61. [    0.000000]     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
  62.  
  63. [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
  64.  
  65. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  66.  
  67. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  68.  
  69. [    0.000000]       .text : 0xc0008000 - 0xc07d32b0   (7981 kB)
  70.  
  71. [    0.000000]       .init : 0xc07d4000 - 0xc0825840   ( 327 kB)
  72.  
  73. [    0.000000]       .data : 0xc0826000 - 0xc0855850   ( 191 kB)
  74.  
  75. [    0.000000]        .bss : 0xc08b92d8 - 0xc0a2ceb0   (1487 kB)
  76.  
  77. [    0.000000] Preemptible hierarchical RCU implementation.
  78.  
  79. [    0.000000] NR_IRQS:480
  80.  
  81. [    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  82.  
  83. [    0.002726] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
  84.  
  85. [    0.066799] pid_max: default: 32768 minimum: 301
  86.  
  87. [    0.070537] Mount-cache hash table entries: 512
  88.  
  89. [    0.074445] Initializing cgroup subsys debug
  90.  
  91. [    0.077916] Initializing cgroup subsys cpuacct
  92.  
  93. [    0.081415] Initializing cgroup subsys freezer
  94.  
  95. [    0.084721] Initializing cgroup subsys bfqio
  96.  
  97. [    0.088301] CPU: Testing write buffer coherency: ok
  98.  
  99. [    0.093041] ftrace: allocating 21184 entries in 63 pages
  100.  
  101. [    0.213429] CPU1: Booted secondary processor
  102.  
  103. [    0.215438] Brought up 2 CPUs
  104.  
  105. [    0.220860] SMP: Total of 2 processors activated (3974.75 BogoMIPS).
  106.  
  107. [    0.226719] print_constraints: dummy:
  108.  
  109. [    0.230379] NET: Registered protocol family 16
  110.  
  111. [    0.232887] host1x bus init
  112.  
  113. [    0.238590] Selecting UARTA as the debug console
  114.  
  115. [    0.242330] The debug console clock name is uarta
  116.  
  117. [    0.247336] ram_console: got buffer at 16700000, size 100000
  118.  
  119. [    0.253271] ram_console: found existing buffer, size 211085, start 211085
  120.  
  121. [    0.668792] console [ram-1] enabled
  122.  
  123. [    1.529183] smba_audio_register_devices++
  124.  
  125. [    1.553312] tegra_arb_init: initialized
  126.  
  127. [    1.557256] tegra_iovmm_register: added iovmm-gart
  128.  
  129. [    1.569419] bio: create slab <bio-0> at 0
  130.  
  131. [    1.572925] SCSI subsystem initialized
  132.  
  133. [    1.577716] usbcore: registered new interface driver usbfs
  134.  
  135. [    1.582280] usbcore: registered new interface driver hub
  136.  
  137. [    1.586532] usbcore: registered new device driver usb
  138.  
  139. [    1.591350] tegra-otg tegra-otg: otg transceiver registered
  140.  
  141. [    1.600367] tps6586x 4-0034: VERSIONCRC is 05
  142.  
  143. [    1.605116] Wake18 for irq=118
  144.  
  145. [    1.606966] Enabling wake18
  146.  
  147. [    1.615833] print_constraints: REG-SM_0: 725 <--> 1500 mV at 1275 mV normal standby
  148.  
  149. [    1.625076] print_constraints: REG-SM_1: 725 <--> 1500 mV at 1000 mV normal standby
  150.  
  151. [    1.635991] print_constraints: REG-SM_2: 3000 <--> 4550 mV at 3700 mV normal standby
  152.  
  153. [    1.644571] print_constraints: REG-LDO_0: 1500 <--> 3300 mV at 1200 mV normal standby
  154.  
  155. [    1.654361] print_constraints: REG-LDO_1: 725 <--> 1500 mV at 1100 mV normal standby
  156.  
  157. [    1.662922] print_constraints: REG-LDO_2: 725 <--> 1500 mV at 1275 mV normal standby
  158.  
  159. [    1.672281] print_constraints: REG-LDO_3: 1250 <--> 3300 mV at 3300 mV normal standby
  160.  
  161. [    1.682168] print_constraints: REG-LDO_4: 1700 <--> 2475 mV at 1800 mV normal standby
  162.  
  163. [    1.690345] print_constraints: REG-LDO_5: 1250 <--> 3300 mV at 2850 mV normal standby
  164.  
  165. [    1.698300] print_constraints: REG-LDO_6: 1800 mV normal standby
  166.  
  167. [    1.706926] print_constraints: REG-LDO_7: 1250 <--> 3300 mV at 3300 mV normal standby
  168.  
  169. [    1.715579] print_constraints: REG-LDO_8: 1250 <--> 3300 mV at 1800 mV normal standby
  170.  
  171. [    1.723707] print_constraints: REG-LDO_9: 1250 <--> 3300 mV at 2850 mV normal standby
  172.  
  173. [    1.728786] tegra_camera tegra_camera.0: tegra_camera_probe
  174.  
  175. [    1.735968] _regulator_get: tegra_camera.0 supply vcsi not found, using dummy regulator
  176.  
  177. [    1.741916] Advanced Linux Sound Architecture Driver Version 1.0.24.
  178.  
  179. [    1.745017] Bluetooth: Core ver 2.16
  180.  
  181. [    1.748585] NET: Registered protocol family 31
  182.  
  183. [    1.754068] Bluetooth: HCI device and connection manager initialized
  184.  
  185. [    1.758130] Bluetooth: HCI socket layer initialized
  186.  
  187. [    1.762288] Bluetooth: L2CAP socket layer initialized
  188.  
  189. [    1.766345] Bluetooth: SCO socket layer initialized
  190.  
  191. [    1.772095] cfg80211: Calling CRDA to update world regulatory domain
  192.  
  193. [    1.775806] Switching to clocksource timer_us
  194.  
  195. [    1.783503] Switched to NOHz mode on CPU #0
  196.  
  197. [    1.786705] Switched to NOHz mode on CPU #1
  198.  
  199. [    1.796177] nvmap_page_pool_init: nvmap uc page pool size=11013 pages
  200.  
  201. [    1.814442] nvmap_page_pool_init: nvmap pool = uc, highmem=0, pool_size=11013,totalram=88107, freeram=76411, totalhigh=0, freehigh=0
  202.  
  203. [    1.852681] nvmap_page_pool_init: nvmap wc page pool size=11013 pages
  204.  
  205. [    1.870972] nvmap_page_pool_init: nvmap pool = wc, highmem=0, pool_size=11013,totalram=88107, freeram=65344, totalhigh=0, freehigh=0
  206.  
  207. [    1.909013] nvmap_page_pool_init: nvmap iwb page pool size=11013 pages
  208.  
  209. [    1.927491] nvmap_page_pool_init: nvmap pool = iwb, highmem=0, pool_size=11013,totalram=88107, freeram=54308, totalhigh=0, freehigh=0
  210.  
  211. [    1.965671] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  212.  
  213. [    1.972971] tegra-nvmap tegra-nvmap: created carveout generic-0 (131072KiB)
  214.  
  215. [    1.977428] NET: Registered protocol family 2
  216.  
  217. [    1.983718] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  218.  
  219. [    1.990446] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  220.  
  221. [    1.996487] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  222.  
  223. [    2.002373] TCP: Hash tables configured (established 16384 bind 16384)
  224.  
  225. [    2.004640] TCP reno registered
  226.  
  227. [    2.009594] UDP hash table entries: 256 (order: 1, 8192 bytes)
  228.  
  229. [    2.015076] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  230.  
  231. [    2.018716] NET: Registered protocol family 1
  232.  
  233. [    2.021400] Unpacking initramfs...
  234.  
  235. [    2.034143] Freeing initrd memory: 180K
  236.  
  237. [    2.037543] host1x host1x: initialized
  238.  
  239. [    2.041747] PMU: registered new PMU device of type 0
  240.  
  241. [    2.045554] bcb: registered reboot notifier
  242.  
  243. [    2.059971] ashmem: initialized
  244.  
  245. [    2.064067] NTFS driver 2.1.30 [Flags: R/W].
  246.  
  247. [    2.067147] fuse init (API version 7.17)
  248.  
  249. [    2.072341] yaffs: yaffs built Feb 26 2013 21:19:56 Installing.
  250.  
  251. [    2.076479] io scheduler noop registered
  252.  
  253. [    2.079861] io scheduler deadline registered
  254.  
  255. [    2.082893] io scheduler cfq registered
  256.  
  257. [    2.085813] io scheduler sio registered
  258.  
  259. [    2.088777] io scheduler bfq registered
  260.  
  261. [    2.092643] io scheduler row registered (default)
  262.  
  263. [    2.095634] mpe mpe01: initialized
  264.  
  265. [    2.098582] gr3d gr3d01: initialized
  266.  
  267. [    2.101097] dsi dsi: initialized
  268.  
  269. [    2.103781] gr2d gr2d: initialized
  270.  
  271. [    2.309452] tegradc tegradc.0: probed
  272.  
  273. [    2.312496] tegradc tegradc.0: probed
  274.  
  275. [    2.320097] Wake4 for irq=303
  276.  
  277. [    2.324014] nvhdcp: using "always on" policy.
  278.  
  279. [    2.327118] tegradc tegradc.1: probed
  280.  
  281. [    2.330206] tegradc tegradc.1: probed
  282.  
  283. [    2.336943] tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
  284.  
  285. [    2.428761] Registered UART port ttyHS1
  286.  
  287. [    2.435211] tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
  288.  
  289. [    2.588767] Registered UART port ttyHS2
  290.  
  291. [    2.595302] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
  292.  
  293. [    2.748767] Registered UART port ttyHS3
  294.  
  295. [    2.755297] tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
  296.  
  297. [    2.908768] Registered UART port ttyHS4
  298.  
  299. [    2.911941] Initialized tegra uart driver
  300.  
  301. [    2.916579] loop: module loaded
  302.  
  303. [    2.920393] lis3lv02d: 8 bits sensor found
  304.  
  305. [    2.963445] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
  306.  
  307. [    2.972907] tegra_nand: 1 NAND chip(s) found (vend=0xad, dev=0xdc) (Hynix NAND 512MiB 3,3V 8-bit)
  308.  
  309. [    2.979373] tegra_nand: NVIDIA Tegra NAND controller @ base=0x70008000 irq=56.
  310.  
  311. [    3.305440] 7 cmdlinepart partitions found on MTD device tegra_nand
  312.  
  313. [    3.309749] Creating 7 MTD partitions on "tegra_nand":
  314.  
  315. [    3.313655] 0x000000bc0000-0x000001bc0000 : "misc"
  316.  
  317. [    3.318674] 0x000003cc0000-0x000004cc0000 : "recovery"
  318.  
  319. [    3.323329] 0x000004d60000-0x000005d60000 : "boot"
  320.  
  321. [    3.328140] 0x000006e60000-0x00001ff80000 : "system"
  322.  
  323. [    3.333296] 0x000005de0000-0x000006de0000 : "cache"
  324.  
  325. [    3.338115] 0x000000740000-0x000000b40000 : "bootbmp"
  326.  
  327. [    3.343065] 0x000001c40000-0x000003c40000 : "logodata"
  328.  
  329. [    3.347157] PPP generic driver version 2.4.2
  330.  
  331. [    3.351511] PPP Deflate Compression module registered
  332.  
  333. [    3.355316] PPP BSD Compression module registered
  334.  
  335. [    3.359943] PPP MPPE Compression module registered
  336.  
  337. [    3.363481] NET: Registered protocol family 24
  338.  
  339. [    3.368418] usbcore: registered new interface driver asix
  340.  
  341. [    3.373500] usbcore: registered new interface driver cdc_ether
  342.  
  343. [    3.378415] usbcore: registered new interface driver smsc95xx
  344.  
  345. [    3.383594] usbcore: registered new interface driver cdc_subset
  346.  
  347. [    3.385901] cdc_ncm: 04-Aug-2011
  348.  
  349. [    3.390797] usbcore: registered new interface driver cdc_ncm
  350.  
  351. [    3.396472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  352.  
  353. [    3.400493] tegra USB phy - inst[2] platform info:
  354.  
  355. [    3.402077] port_otg: no
  356.  
  357. [    3.403837] has_hostpc: no
  358.  
  359. [    3.407253] phy_interface: USB_PHY_INTF_UTMI
  360.  
  361. [    3.410446] op_mode: TEGRA_USB_OPMODE_HOST
  362.  
  363. [    3.412119] vbus_gpio: -1
  364.  
  365. [    3.413939] vbus_reg: NULL
  366.  
  367. [    3.415964] hot_plug: enabled
  368.  
  369. [    3.418535] remote_wakeup: disabled
  370.  
  371. [    3.427709] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  372.  
  373. [    3.434589] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
  374.  
  375. [    3.470895] tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
  376.  
  377. [    3.490882] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
  378.  
  379. [    3.494560] utmi_phy_irq: usb device plugged-in
  380.  
  381. [    3.500534] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  382.  
  383. [    3.506963] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  384.  
  385. [    3.511474] usb usb1: Product: Tegra EHCI Host Controller
  386.  
  387. [    3.517272] usb usb1: Manufacturer: Linux 3.1.10-DRH-FOSS-3.1+ ehci_hcd
  388.  
  389. [    3.520986] usb usb1: SerialNumber: tegra-ehci.2
  390.  
  391. [    3.524174] hub 1-0:1.0: USB hub found
  392.  
  393. [    3.527181] hub 1-0:1.0: 1 port detected
  394.  
  395. [    3.535092] tegra-ehci tegra-ehci.2: Couldn't enable USB host mode wakeup, irq=129, error=-22
  396.  
  397. [    3.540079] usbcore: registered new interface driver cdc_acm
  398.  
  399. [    3.547302] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  400.  
  401. [    3.552120] usbcore: registered new interface driver cdc_wdm
  402.  
  403. [    3.556148] Initializing USB Mass Storage driver...
  404.  
  405. [    3.561350] usbcore: registered new interface driver usb-storage
  406.  
  407. [    3.565113] USB Mass Storage support registered.
  408.  
  409. [    3.570022] usbcore: registered new interface driver libusual
  410.  
  411. [    3.575150] usbcore: registered new interface driver usbserial
  412.  
  413. [    3.579325] USB Serial support registered for generic
  414.  
  415. [    3.585095] usbcore: registered new interface driver usbserial_generic
  416.  
  417. [    3.588532] usbserial: USB Serial Driver core
  418.  
  419. [    3.594102] USB Serial support registered for FTDI USB Serial Device
  420.  
  421. [    3.599053] usbcore: registered new interface driver ftdi_sio
  422.  
  423. [    3.604070] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  424.  
  425. [    3.609215] USB Serial support registered for GSM modem (1-port)
  426.  
  427. [    3.614060] usbcore: registered new interface driver option
  428.  
  429. [    3.618113] option: v0.7.2:USB Driver for GSM modems
  430.  
  431. [    3.622272] USB Serial support registered for pl2303
  432.  
  433. [    3.627000] usbcore: registered new interface driver pl2303
  434.  
  435. [    3.632233] pl2303: Prolific PL2303 USB to serial adaptor driver
  436.  
  437. [    3.639472] Nvidia Tegra High-Speed USB SOC                                  Device Controller driver (Apr 30, 2012)
  438.  
  439. [    3.643488] tegra USB phy - inst[0] platform info:
  440.  
  441. [    3.645157] port_otg: yes
  442.  
  443. [    3.646971] has_hostpc: no
  444.  
  445. [    3.650327] phy_interface: USB_PHY_INTF_UTMI
  446.  
  447. [    3.653671] op_mode: TEGRA_USB_OPMODE_DEVICE
  448.  
  449. [    3.655513] vbus_pmu_irq: 0
  450.  
  451. [    3.657177] vbus_gpio: -1
  452.  
  453. [    3.659294] charging: disabled
  454.  
  455. [    3.661841] remote_wakeup: disabled
  456.  
  457. [    3.667998] create_regulator: REG-LDO_3: Failed to create debugfs directory
  458.  
  459. [    3.680704] _regulator_get: deviceless supply usb_bat_chg not found, using dummy regulator
  460.  
  461. [    3.687930] android_usb gadget: Mass Storage Function, version: 2009/09/11
  462.  
  463. [    3.691653] android_usb gadget: Number of LUNs=1
  464.  
  465. [    3.695621]  lun0: LUN: removable file: (no medium)
  466.  
  467. [    3.699564] android_usb gadget: android_usb ready
  468.  
  469. [    3.703432] tegra-udc: bind to driver android_usb
  470.  
  471. [    3.708264] mousedev: PS/2 mouse device common for all mice
  472.  
  473. [    3.711147] SO340010: so340010_kbd_init
  474.  
  475.  
  476. [    3.713988] SO340010: so340010_kbd_probe
  477.  
  478.  
  479. [    3.719241] input: so340010_kbd as /devices/virtual/input/input1
  480.  
  481. [    3.729073] Wake14 for irq=366
  482.  
  483. [    3.820155] at168_touch: InitData[0] = 0x0---
  484.  
  485. [    3.823388] at168_touch: InitData[1] = 0x4---
  486.  
  487. [    3.826643] at168_touch: InitData[2] = 0x58---
  488.  
  489. [    3.829827] at168_touch: InitData[3] = 0x2---
  490.  
  491. [    3.833060] at168_touch: InitData[4] = 0x2---
  492.  
  493. [    3.836229] at168_touch: InitData[5] = 0x1---
  494.  
  495. [    3.839407] at168_touch: InitData[6] = 0x1---
  496.  
  497. [    3.842724] at168_touch: InitData[7] = 0x12---
  498.  
  499. [    3.848807] at168_touch: now FW xMAX is 1024   yMAx is 600 Version is 2010112.
  500.  
  501. [    3.854563] usb 1-1: new high speed USB device number 2 using tegra-ehci
  502.  
  503. [    3.859899] input: at168_touch as /devices/virtual/input/input2
  504.  
  505. [    3.862281] Wake15 for irq=271
  506.  
  507. [    3.866735] at168_touch 0-005c: at168_probe: initialized
  508.  
  509. [    3.873064] using rtc device, tps6586x-rtc, for alarms
  510.  
  511. [    3.879795] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
  512.  
  513. [    3.886226] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
  514.  
  515. [    3.892519] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  516.  
  517. [    3.895825] hub 1-1:1.0: USB hub found
  518.  
  519. [    3.899105] hub 1-1:1.0: 4 ports detected
  520.  
  521. [    3.901768] i2c /dev entries driver
  522.  
  523. [    3.905202] Linux media interface: v0.10
  524.  
  525. [    3.908939] Linux video capture interface: v2.00
  526.  
  527. [    3.915237] soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
  528.  
  529. [    3.920042] tegra_camera tegra_camera.0: tegra_camera_enable
  530.  
  531. [    3.925179] tegra_camera_add_device: icd=cd978c00 sd=  (null)
  532.  
  533. [    3.932262] _regulator_get: 3-003c supply vdda not found, using dummy regulator
  534.  
  535. [    3.939118] _regulator_get: 3-003c supply vdd_reg not found, using dummy regulator
  536.  
  537. [    3.945775] _regulator_get: 3-003c supply vddio not found, using dummy regulator
  538.  
  539. [    4.094439] S5K6AA 3-003c: FW API ver.: 0x1, FW rev.: 0x107
  540.  
  541. [    4.099811] tegra-camera tegra-camera.0: Not supporting RGB565X
  542.  
  543. [    4.107602] tegra-camera tegra-camera.0: Providing format YUV422 (UYVY) packed using code 8200
  544.  
  545. [    4.115446] tegra-camera tegra-camera.0: Providing format YUV422 (VYUY) packed using code 8200
  546.  
  547. [    4.123281] tegra-camera tegra-camera.0: Providing format YUV422 (YUYV) packed using code 8200
  548.  
  549. [    4.131123] tegra-camera tegra-camera.0: Providing format YUV422 (YVYU) packed using code 8200
  550.  
  551. [    4.138901] tegra-camera tegra-camera.0: Providing format YUV420 (YU12) planar using code 8200
  552.  
  553. [    4.146742] tegra-camera tegra-camera.0: Providing format YVU420 (YV12) planar using code 8200
  554.  
  555. [    4.154582] tegra-camera tegra-camera.0: Providing format YUV422 (UYVY) packed using code 8200
  556.  
  557. [    4.162412] tegra-camera tegra-camera.0: Providing format YUV422 (VYUY) packed using code 8200
  558.  
  559. [    4.170253] tegra-camera tegra-camera.0: Providing format YUV422 (YUYV) packed using code 8200
  560.  
  561. [    4.178033] tegra-camera tegra-camera.0: Providing format YUV422 (YVYU) packed using code 8200
  562.  
  563. [    4.185870] tegra-camera tegra-camera.0: Providing format YUV420 (YU12) planar using code 8200
  564.  
  565. [    4.193813] tegra-camera tegra-camera.0: Providing format YVU420 (YV12) planar using code 8200
  566.  
  567. [    4.198902] tegra-camera tegra-camera.0: Not supporting RGB565X
  568.  
  569. [    4.203865] tegra_camera tegra_camera.0: tegra_camera_disable
  570.  
  571. [    4.209404] tegra-camera tegra-camera.0: Tegra camera driver loaded.
  572.  
  573. [    4.214375] usbcore: registered new interface driver uvcvideo
  574.  
  575. [    4.217608] USB Video Class driver (1.1.1)
  576.  
  577. [    4.221844] trpc_sema_init: registered misc dev 10:51
  578.  
  579. [    4.226581] trpc_node_register: Adding 'local' to node list
  580.  
  581. [    4.233395] tegra_avp_probe: allocated carveout memory at 18100000 for AVP kernel
  582.  
  583. [    4.238658] trpc_node_register: Adding 'avp-remote' to node list
  584.  
  585. [    4.243321] tegra_avp_probe: message area d981000/d981110
  586.  
  587. [    4.247799] Driver for 1-wire Dallas network protocol.
  588.  
  589. [    4.266241] smba-battery 0-000b: driver registered
  590.  
  591. [    4.272113] i2c-core: driver [smba-battery] using legacy suspend method
  592.  
  593. [    4.277807] i2c-core: driver [smba-battery] using legacy resume method
  594.  
  595. [    4.285626] _regulator_get: deviceless supply vdd_vcore_temp not found, using dummy regulator
  596.  
  597. [    4.299220] i2c-core: driver [adt7461] using legacy suspend method
  598.  
  599. [    4.304528] i2c-core: driver [adt7461] using legacy resume method
  600.  
  601. [    4.308653] device-mapper: uevent: version 1.0.3
  602.  
  603. [    4.316427] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
  604.  
  605. [    4.320085] Bluetooth: HCI UART driver ver 2.2
  606.  
  607. [    4.324003] Bluetooth: HCI H4 protocol initialized
  608.  
  609. [    4.327875] Bluetooth: HCILL protocol initialized
  610.  
  611. [    4.331981] Bluetooth: BlueSleep Mode Driver Ver 1.1
  612.  
  613. [    4.334070] Wake7 for irq=358
  614.  
  615. [    4.337749] cpuidle: using governor ladder
  616.  
  617. [    4.340954] cpuidle: using governor menu
  618.  
  619. [    4.346270] sdhci: Secure Digital Host Controller Interface driver
  620.  
  621. [    4.349782] sdhci: Copyright(c) Pierre Ossman
  622.  
  623. [    4.354544] sdhci-pltfm: SDHCI platform and OF driver helper
  624.  
  625. [    4.359835] mmc0: Invalid maximum block size, assuming 512 bytes
  626.  
  627. [    4.363540] Registered led device: mmc0::
  628.  
  629. [    4.370101] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  630.  
  631. [    4.372348] Wake23 for irq=261
  632.  
  633. [    4.374562] Wake23 for irq=261
  634.  
  635. [    4.376408] Enabling wake23
  636.  
  637. [    4.380374] gpio bank wake found: wake23 for irq=66
  638.  
  639. [    4.382218] Enabling wake23
  640.  
  641. [    4.391004] _regulator_get: sdhci-tegra.2 supply vddio_sdmmc not found, using dummy regulator
  642.  
  643. [    4.397876] sdhci-tegra sdhci-tegra.2: vddio_sdmmc regulator_set_voltage failed: -22
  644.  
  645. [    4.405834] _regulator_get: sdhci-tegra.2 supply vddio_sd_slot not found, using dummy regulator
  646.  
  647. [    4.411185] mmc1: Invalid maximum block size, assuming 512 bytes
  648.  
  649. [    4.419292] _regulator_get: sdhci-tegra.2 supply vmmc not found, using dummy regulator
  650.  
  651. [    4.424604] Registered led device: mmc1::
  652.  
  653. [    4.431150] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
  654.  
  655. [    4.436348] mmc2: Invalid maximum block size, assuming 512 bytes
  656.  
  657. [    4.443513] _regulator_get: sdhci-tegra.0 supply vmmc not found, using dummy regulator
  658.  
  659. [    4.446712] Registered led device: mmc2::
  660.  
  661. [    4.453283] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
  662.  
  663. [    4.456489] Registered dock switch driver
  664.  
  665. [    4.461447] tegra-aes tegra-aes: registered
  666.  
  667. [    4.468371] usbcore: registered new interface driver usbhid
  668.  
  669. [    4.471449] usbhid: USB HID core driver
  670.  
  671. [    4.475337] logger: created 256K log 'log_main'
  672.  
  673. [    4.479201] logger: created 256K log 'log_events'
  674.  
  675. [    4.483052] logger: created 256K log 'log_radio'
  676.  
  677. [    4.486910] logger: created 256K log 'log_system'
  678.  
  679. [    4.489779] ISL29023: isl29023_probe
  680.  
  681.  
  682. [    4.492631] ISL29023: isl29023_chip_init
  683.  
  684.  
  685. [    4.500340] _regulator_get: deviceless supply vdd_vcore_phtn not found, using dummy regulator
  686.  
  687. [    4.510164] ISL29023: isl29023_chip_init successfully
  688.  
  689.  
  690. [    4.513983] ISL29023: isl29023_probed successfully
  691.  
  692.  
  693. [    4.522217] zcache: cleancache enabled using kernel transcendent memory and compression buddies
  694.  
  695. [    4.527317] mmc0: new high speed MMC card at address 0001
  696.  
  697. [    4.531431] mmcblk0: mmc0:0001 MAG4EM 14.9 GiB
  698.  
  699. [    4.539835] tegra-snd-alc5623 tegra-snd-alc5623.0: sound card registered
  700.  
  701. [    4.541875]  mmcblk0: p1 p2 p3
  702.  
  703. [    4.587648] Wake12 for irq=370
  704.  
  705. [    4.787004] mmc1: host does not support reading read-only switch. assuming write-enable.
  706.  
  707. [    4.798637] mmc1: new high speed SDXC card at address e624
  708.  
  709. [    4.802609] mmcblk1: mmc1:e624 SU64G 59.4 GiB
  710.  
  711. [    4.813195]  mmcblk1: p1
  712.  
  713. [    5.102578] asoc: alc5623-hifi <-> tegra20-i2s.0 mapping ok
  714.  
  715. [    5.108924] asoc: tegra_generic_voice_codec <-> tegra20-i2s.1 mapping ok
  716.  
  717. [    5.113700] asoc: dit-hifi <-> tegra20-spdif mapping ok
  718.  
  719. [    5.123271] input: tegra-alc5623 Headphone Jack as /devices/platform/tegra-snd-alc5623.0/sound/card0/input3
  720.  
  721. [    5.125591] ALSA device list:
  722.  
  723. [    5.127792]   #0: tegra-alc5623
  724.  
  725. [    5.130433] GACT probability NOT on
  726.  
  727. [    5.133229] Mirror/redirect action on
  728.  
  729. [    5.134986] u32 classifier
  730.  
  731. [    5.137445]     Actions configured
  732.  
  733. [    5.141310] Netfilter messages via NETLINK v0.30.
  734.  
  735. [    5.146472] nf_conntrack version 0.5.0 (5509 buckets, 22036 max)
  736.  
  737. [    5.152895] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  738.  
  739. [    5.157838] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  740.  
  741. [    5.161554] xt_time: kernel timezone is -0000
  742.  
  743. [    5.166104] ip_tables: (C) 2000-2006 Netfilter Core Team
  744.  
  745. [    5.169987] arp_tables: (C) 2002 David S. Miller
  746.  
  747. [    5.172315] TCP cubic registered
  748.  
  749. [    5.175948] NET: Registered protocol family 10
  750.  
  751. [    5.178224] Mobile IPv6
  752.  
  753. [    5.182746] ip6_tables: (C) 2000-2006 Netfilter Core Team
  754.  
  755. [    5.186148] IPv6 over IPv4 tunneling driver
  756.  
  757. [    5.190712] NET: Registered protocol family 17
  758.  
  759. [    5.194260] NET: Registered protocol family 15
  760.  
  761. [    5.198341] Bluetooth: RFCOMM TTY layer initialized
  762.  
  763. [    5.202662] Bluetooth: RFCOMM socket layer initialized
  764.  
  765. [    5.205481] Bluetooth: RFCOMM ver 1.11
  766.  
  767. [    5.209949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  768.  
  769. [    5.214986] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  770.  
  771. [    5.221210] rfkill_gpio rfkill_gpio: bluetooth_rfkill device registered.
  772.  
  773. [    5.225073] Registering the dns_resolver key type
  774.  
  775. [    5.227102] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  776.  
  777. [    5.235401] ThumbEE CPU extension supported.
  778.  
  779. [    5.239354] Registering SWP/SWPB emulation handler
  780.  
  781. [    5.249706] Disabling clocks left on by bootloader:
  782.  
  783. [    5.251000]    audio
  784.  
  785. [    5.252521]    stat_mon
  786.  
  787. [    5.254191]    dsi2-fixed
  788.  
  789. [    5.255858]    dsi1-fixed
  790.  
  791. [    5.257467]    fuse_burn
  792.  
  793. [    5.258757]    clk_d
  794.  
  795. [    5.260425]    pll_p_out2
  796.  
  797. [    5.262583] CPU rate: 1000 MHz
  798.  
  799. [    5.269023] tegra_dvfs: vdd_cpu: stats above 1237 mV will be squashed
  800.  
  801. [    5.275265] tegra_dvfs: vdd_core: stats above 1437 mV will be squashed
  802.  
  803. [    5.281324] tegra_dvfs: vdd_aon: stats above 1437 mV will be squashed
  804.  
  805. [    5.291116] ## wifi_probe
  806.  
  807. [    5.292966] wifi_set_power = 1
  808.  
  809. [    5.595557] wifi_set_carddetect = 1
  810.  
  811. [    5.605691]
  812.  
  813. [    5.605694] Dongle Host Driver, version 5.90.195.75
  814.  
  815. [    5.605699] Compiled in drivers/net/wireless/bcmdhd on Feb 26 2013 at 21:19:56
  816.  
  817. [    5.639405] mmc2: new high speed SDIO card at address 0001
  818.  
  819. [    5.648705] bcmdhd: fw_path: /system/vendor/firmware/fw_bcmdhd.bin nvram_path: /system/etc/wifi/bcmdhd.cal
  820.  
  821. [    5.652616] F1 signature read @0x18000000=0x9934329
  822.  
  823. [    5.660027] DHD: dongle ram size is set to 294912(orig 294912)
  824.  
  825. [    5.664375] wl_create_event_handler thr:5e started
  826.  
  827. [    5.667139] dhd_attach thr:5f started
  828.  
  829. [    5.669737] dhd_attach thr:60 started
  830.  
  831. [    5.672261] dhd_attach thr:61 started
  832.  
  833. [    5.679016] _dhdsdio_download_firmware: dongle image file download failed
  834.  
  835. [    5.690811] dhd_bus_start: dhdsdio_probe_download failed. firmware = /system/vendor/firmware/fw_bcmdhd.bin nvram = /system/etc/wifi/bcmdhd.cal
  836.  
  837. [    5.694353] dhdsdio_probe: dhd_bus_start failed
  838.  
  839. [    5.702067] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  840.  
  841. [    5.704452] Wake24 for irq=362
  842.  
  843. [    5.710616] input: gpio-keys as /devices/platform/gpio-keys.0/input/input4
  844.  
  845. [    5.717426] smba_wake.c: Connected device: input4 (gpio-keys at gpio-keys/input0)
  846.  
  847. [    5.727008] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2013-03-02 19:36:45 UTC (1362253005)
  848.  
  849. [    5.731526] Warning: unable to open an initial console.
  850.  
  851. [    5.734484] Freeing init memory: 324K
  852.  
  853. [    5.745949] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  854.  
  855. [    5.881815] yaffs: dev is 32505859 name is "mtdblock3" rw
  856.  
  857. [    5.884348] yaffs: passed flags ""
  858.  
  859. [    5.889018] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
  860.  
  861. [    6.006225] yaffs: yaffs_read_super: is_checkpointed 1
  862.  
  863. [   10.080106] zcache: created ephemeral tmem pool, id=0, client=65535
  864.  
  865. [   10.084225] EXT4-fs (mmcblk0p3): recovery complete
  866.  
  867. [   10.098689] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic
  868.  
  869. [   14.979616] zcache: created ephemeral tmem pool, id=1, client=65535
  870.  
  871. [   14.983740] EXT4-fs (mmcblk0p2): recovery complete
  872.  
  873. [   15.002347] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic
  874.  
  875. [   15.077215] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
  876.  
  877. [   15.180262] tegra_uart tegra_uart.2: Setting clk_src pll_p
  878.  
  879. [   15.185208] tegra_uart tegra_uart.2: Setting clk_src clk_m
  880.  
  881. [   15.194565] tegra_uart tegra_uart.2: Setting clk_src pll_p
  882.  
  883. [   15.199401] tegra_uart tegra_uart.2: Setting clk_src clk_m
  884.  
  885. [   15.210394] tegra_uart tegra_uart.3: Setting clk_src pll_p
  886.  
  887. [   15.215238] tegra_uart tegra_uart.3: Setting clk_src clk_m
  888.  
  889. [   15.224602] tegra_uart tegra_uart.3: Setting clk_src pll_p
  890.  
  891. [   15.229434] tegra_uart tegra_uart.3: Setting clk_src clk_m
  892.  
  893. [   15.357696] init: service 'console' requires console
  894.  
  895. [   15.361777] android_usb: already disabled
  896.  
  897. [   15.365554] android_usb: already disabled
  898.  
  899. [   15.369085] mtp_bind_config
  900.  
  901. [   15.371504] adb_bind_config
  902.  
  903. [   15.384477] warning: `adbd' uses 32-bit capabilities (legacy support in use)
  904.  
  905. [   15.386551] adb_open(adbd)
  906.  
  907. [   16.856504] zram: module is from the staging directory, the quality is unknown, you have been warned.
  908.  
  909. [   16.860862] zram: Creating 2 devices ...
  910.  
  911. [   17.093966] Adding 31760k swap on /dev/block/zram0.  Priority:-1 extents:1 across:31760k SS
  912.  
  913. [   17.192054] Adding 31760k swap on /dev/block/zram1.  Priority:-2 extents:1 across:31760k SS
  914.  
  915. [   25.998779] avp_init: Using AVP MMU to relocate AVP kernel
  916.  
  917. [   26.025019] avp_init: Reading firmware from 'nvrm_avp.bin' (35364 bytes)
  918.  
  919. [   26.031141] avp_init: Loading AVP kernel at vaddr=e1a00000 paddr=18100000
  920.  
  921. [   26.061643] avp_reset: Resetting AVP: reset_addr=100000
  922.  
  923. [   26.075580] process_connect_locked: got connect (10e9a0)
  924.  
  925. [   26.080941] avp_node_try_connect: trying connect from RPC_AVP_PORT
  926.  
  927. [   26.084131] avp_svc_thread: got remote peer
  928.  
  929. [   26.088361] [AVP]: AVP kernel (May 21 2012 17:07:27)
  930.  
  931. [   26.097704] avp_node_try_connect: got conn ack 'RPC_AVP_PORT' (d30ca580 <-> 10e964)
  932.  
  933. [   26.100465] avp_init: avp init done
  934.  
  935. [   26.105164] avp_lib: loading library 'nvmm_manager.axf'
  936.  
  937. [   26.121516] avp_lib: Successfully loaded library nvmm_manager.axf (lib_id=115940)
  938.  
  939. [   26.127365] avp_node_try_connect: trying connect from NVMM_MANAGER_SRV
  940.  
  941. [   26.143205] avp_node_try_connect: got conn ack 'NVMM_MANAGER_SRV' (d0459280 <-> 116bd8)
  942.  
  943. [   26.148999] avp_lib: loading library 'nvmm_service.axf'
  944.  
  945. [   26.161252] avp_lib: Successfully loaded library nvmm_service.axf (lib_id=117748)
  946.  
  947. [   26.166382] avp_node_try_connect: trying connect from caaaaaaa+
  948.  
  949. [   26.182832] avp_node_try_connect: got conn ack 'caaaaaaa+' (d3139e60 <-> 118a88)
  950.  
  951. [   26.356643] avp_lib: loading library 'nvmm_h264dec.axf'
  952.  
  953. [   26.414395] avp_lib: Successfully loaded library nvmm_h264dec.axf (lib_id=1195f8)
  954.  
  955. [   26.419843] avp_node_try_connect: trying connect from daaaaaaa+
  956.  
  957. [   26.439204] avp_node_try_connect: got conn ack 'daaaaaaa+' (d3139a80 <-> 119ba8)
  958.  
  959. [   27.441323] process_disconnect_locked: got disconnect (d3139a80)
  960.  
  961. [   27.470742] avp_lib: Successfully unloaded 'nvmm_h264dec.axf'
  962.  
  963. [   27.474552] avp_lib: unloaded 'nvmm_h264dec.axf'
  964.  
  965. [   27.480717] avp_trpc_close: closing 'caaaaaaa+' (118a88)
  966.  
  967. [   27.495667] _send_disconnect: sent disconnect msg for 118a88
  968.  
  969. [   27.520734] avp_lib: Successfully unloaded 'nvmm_service.axf'
  970.  
  971. [   27.524581] avp_lib: unloaded 'nvmm_service.axf'
  972.  
  973. [   27.529946] process_disconnect_locked: got disconnect (d0459280)
  974.  
  975. [   27.550776] avp_lib: Successfully unloaded 'nvmm_manager.axf'
  976.  
  977. [   27.554536] avp_lib: unloaded 'nvmm_manager.axf'
  978.  
  979. [   40.059592] request_suspend_state: wakeup (3->0) at 40035551002 (2013-03-02 19:37:19.824382001 UTC)
  980.  
  981. [   41.411310] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
  982.  
  983. [   41.670119]
  984.  
  985. [   41.670126] Dongle Host Driver, version 5.90.195.75
  986.  
  987. [   41.670131] Compiled in drivers/net/wireless/bcmdhd on Feb 26 2013 at 21:19:56
  988.  
  989. [   41.727607] zcache: created ephemeral tmem pool, id=2, client=65535
  990.  
  991. [   41.732169] EXT4-fs (dm-0): re-mounted. Opts: (null)
  992.  
  993. [   41.747854] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  994.  
  995. [   41.798637] EXT4-fs (dm-0): re-mounted. Opts: (null)
  996.  
  997. [   41.825488] Firmware up: fw_path=/system/vendor/firmware/fw_bcmdhd.bin op_mode=1, Broadcom Dongle Host Driver mac=e0:2a:82:07:ca:1a
  998.  
  999. [   41.848783] Firmware version = wl0: May 25 2012 17:56:21 version 4.218.248.44
  1000.  
  1001. [   41.862226] CFGP2P-ERROR) wl_cfgp2p_supported : wl p2p error -23
  1002.  
  1003. [   41.883935] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
  1004.  
  1005. [   42.002429] zcache: created ephemeral tmem pool, id=3, client=65535
  1006.  
  1007. [   42.008395] EXT4-fs (dm-1): re-mounted. Opts: (null)
  1008.  
  1009. [   42.077052] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for GB as GB rev -1
  1010.  
  1011. [   42.086049] EXT4-fs (dm-1): re-mounted. Opts: (null)
  1012.  
  1013. [   42.195518] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
  1014.  
  1015. [   42.814934] wl_bss_connect_done succeeded
  1016.  
  1017. [   42.830669] wl_bss_connect_done succeeded
  1018.  
  1019. [   42.924927] zcache: created ephemeral tmem pool, id=4, client=65535
  1020.  
  1021. [   42.929411] EXT4-fs (dm-2): re-mounted. Opts: (null)
  1022.  
  1023. [   42.954925] EXT4-fs (dm-2): re-mounted. Opts: (null)
  1024.  
  1025. [   43.595303] qtaguid: iface_stat: stat_update() wlan0 not found
  1026.  
  1027. [   44.590294] acc_open
  1028.  
  1029. [   44.591904] acc_release
  1030.  
  1031. [   56.985813] select 640 (d.process.media), adj 529, size 4749, to kill
  1032.  
  1033. [   56.991605] send sigkill to 640 (d.process.media), adj 529, size 4749
  1034.  
  1035. [   58.162614] select 658 (d.process.acore), adj 0, size 4123, to kill
  1036.  
  1037. [   58.167871] send sigkill to 658 (d.process.acore), adj 0, size 4123
  1038.  
  1039. [   58.196559] select 687 (ApplicationsPro), adj 0, size 4058, to kill
  1040.  
  1041. [   58.229882] select 687 (ApplicationsPro), adj 0, size 3890, to kill
  1042.  
  1043. [   58.234929] send sigkill to 687 (ApplicationsPro), adj 0, size 4058
  1044.  
  1045. [   58.240752] send sigkill to 687 (ApplicationsPro), adj 0, size 3890
  1046.  
  1047. [   58.432316] select 699 (ContactsProvide), adj 0, size 3499, to kill
  1048.  
  1049. [   58.437793] send sigkill to 699 (ContactsProvide), adj 0, size 3499
  1050.  
  1051. [   58.500021] select 677 (key.tablet.full), adj 0, size 3139, to kill
  1052.  
  1053. [   58.507845] send sigkill to 677 (key.tablet.full), adj 0, size 3139
  1054.  
  1055. [   58.515631] select 677 (key.tablet.full), adj 0, size 3128, to kill
  1056.  
  1057. [   58.520786] send sigkill to 677 (key.tablet.full), adj 0, size 3128
  1058.  
  1059. [   58.758649] select 694 (Binder_1), adj 0, size 2916, to kill
  1060.  
  1061. [   58.763078] select 694 (Binder_1), adj 0, size 2916, to kill
  1062.  
  1063. [   58.767536] send sigkill to 694 (Binder_1), adj 0, size 2916
  1064.  
  1065. [   58.773690] send sigkill to 694 (Binder_1), adj 0, size 2916
  1066.  
  1067. [   58.782791] binder: release 658:669 transaction 5228 in, still active
  1068.  
  1069. [   58.791308] binder: send failed reply for transaction 5228 to 567:627
  1070.  
  1071. [   58.826853] select 736 (enmod.trebuchet), adj 0, size 2893, to kill
  1072.  
  1073. [   58.832032] send sigkill to 736 (enmod.trebuchet), adj 0, size 2893
  1074.  
  1075. [   80.779867] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
  1076.  
  1077. [   80.929849] android_work: did not send uevent (0 0   (null))
  1078.  
  1079. [   81.116781] android_work: sent uevent USB_STATE=CONNECTED
  1080.  
  1081. [   81.121966] android_work: sent uevent USB_STATE=DISCONNECTED
  1082.  
  1083. [   81.279044] wlan0: no IPv6 routers present
  1084.  
  1085. [   81.366335] android_work: sent uevent USB_STATE=CONNECTED
  1086.  
  1087. [   81.395784] android_usb gadget: high speed config #1: android
  1088.  
  1089. [   81.400584] android_work: sent uevent USB_STATE=CONFIGURED
  1090.  
  1091. [   83.397904] mtp_open
  1092.  
  1093. [  101.804031] init: untracked pid 1422 exited
  1094.  
  1095. [  137.605881] request_suspend_state: sleep (0->3) at 137581790001 (2013-03-02 19:38:58.497229999 UTC)
  1096.  
  1097. [  137.613602] SO340010: so340010_kbd_early_suspend() IN
  1098.  
  1099.  
  1100. [  137.618546] SO340010: so340010_kbd_early_suspend() OUT
  1101.  
  1102.  
  1103. [  137.656367] active wake lock wlan_wake
  1104.  
  1105. [  137.661059] active wake lock PowerManagerService.Broadcasts
  1106.  
  1107. [  137.959402] dhd_set_suspend: force extra Suspend setting
  1108.  
  1109. [  137.976717] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
  1110.  
  1111. [  137.992718] suspend: enter suspend
  1112.  
  1113. [  137.995585] PM: Syncing filesystems ... done.
  1114.  
  1115. [  138.003439] Tegra cpufreq suspend: setting frequency to 216000 kHz
  1116.  
  1117. [  138.038903] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1118.  
  1119. [  138.073658] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1120.  
  1121. [  138.095053] Suspending console(s) (use no_console_suspend to debug)
  1122.  
  1123.  
  1124.  
  1125. No errors detected
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top