Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Texas Instruments X-Loader 1.41 (Oct 15 2010 - 20:28:09)
- mmc read: Invalid size
- Starting OS Bootloader from MMC/SD1 ...
- U-Boot 2010.09 (Oct 15 2010 - 12:09:16)
- CPU : OMAP4430
- Board: OMAP4 Panda
- I2C: ready
- DRAM: 1 GiB
- MMC: OMAP SD/MMC: 0
- Using default environment
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Hit any key to stop autoboot: 3 2 1 0
- reading boot.scr
- ** Unable to read "boot.scr" from mmc 0:1 **
- reading uImage
- 4160280 bytes read
- Booting from mmc0 ...
- ## Booting kernel from Legacy Image at 82000000 ...
- Image Name: Angstrom/2.6.38/omap4430-panda
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4160216 Bytes = 4 MiB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.38.4 (koen@dominion) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 SMP PREEMPT Sat May 7 17:28:19 CEST 2011 ()
- [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: OMAP4 Panda board
- [ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] OMAP_TAP_DIE_ID_0: 0x09015020
- [ 0.000000] OMAP_TAP_DIE_ID_1: 0x0a3aa80f
- [ 0.000000] OMAP_TAP_DIE_ID_2: 0x00000000
- [ 0.000000] OMAP_TAP_DIE_ID_3: 0x64700003
- [ 0.000000] OMAP4430 ES2.1
- [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c10d6000 s10336 r8192 d14240 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256000
- [ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 5242880 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 1008MB = 1008MB total
- [ 0.000000] Memory: 1008976k/1008976k available, 39600k reserved, 245760K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc004c000 ( 272 kB)
- [ 0.000000] .text : 0xc004c000 - 0xc07e1efc (7768 kB)
- [ 0.000000] .data : 0xc07e2000 - 0xc084bc20 ( 424 kB)
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptable hierarchical RCU implementation.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:410
- [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000122] Calibrating delay loop... 2009.29 BogoMIPS (lpj=7847936)
- [ 0.171936] pid_max: default: 32768 minimum: 301
- [ 0.172119] Security Framework initialized
- [ 0.172180] AppArmor: AppArmor initialized
- [ 0.172210] Yama: becoming mindful.
- [ 0.172332] Mount-cache hash table entries: 512
- [ 0.173126] Initializing cgroup subsys ns
- [ 0.173156] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- [ 0.173156] Initializing cgroup subsys cpuacct
- [ 0.173217] Initializing cgroup subsys memory
- [ 0.173248] Initializing cgroup subsys devices
- [ 0.173248] Initializing cgroup subsys freezer
- [ 0.173370] CPU: Testing write buffer coherency: ok
- [ 0.173645] Calibrating local timer... 491.91MHz.
- [ 0.218994] L310 cache controller enabled
- [ 0.219024] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
- [ 0.257415] CPU1: Booted secondary processor
- [ 0.257446] CPU1: Unknown IPI message 0x1
- [ 0.440093] Brought up 2 CPUs
- [ 0.440093] SMP: Total of 2 processors activated (3972.37 BogoMIPS).
- [ 0.440429] devtmpfs: initialized
- [ 0.442474] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
- [ 0.442504] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
- [ 0.442504] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
- [ 0.442504] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
- [ 0.442535] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
- [ 0.442535] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
- [ 0.442535] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- [ 0.442565] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- [ 0.442565] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
- [ 0.442626] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp
- [ 0.442626] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for ipu
- [ 0.442840] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
- [ 0.447357] omap_hwmod: omap-mcpdm-dai: cannot be enabled (3)
- [ 0.449005] print_constraints: dummy:
- [ 0.449188] NET: Registered protocol family 16
- [ 0.449554] GPMC revision 6.0
- [ 0.450469] OMAP GPIO hardware version 0.1
- [ 0.450500] omap_device: omap_gpio.1: new worst case activate latency 0: 30517
- [ 0.450531] OMAP GPIO hardware version 0.1
- [ 0.450592] OMAP GPIO hardware version 0.1
- [ 0.450653] OMAP GPIO hardware version 0.1
- [ 0.450714] OMAP GPIO hardware version 0.1
- [ 0.450775] OMAP GPIO hardware version 0.1
- [ 0.451538] omap_mux_init: Add partition: #1: core, flags: 2
- [ 0.452270] omap_mux_init: Add partition: #2: wkup, flags: 2
- [ 0.455596] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- [ 0.455627] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
- [ 0.455627] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.457397] pm_dbg_init: only OMAP3 supported
- [ 0.457519] omap_ipussdev_init: could not look up iss
- [ 0.457763] omap_ipussdev_init: could not look up sl2if
- [ 0.458129] OMAP DMA hardware revision 0.0
- [ 0.461914] bio: create slab <bio-0> at 0
- [ 0.462310] print_constraints: vwl1271: 1800 mV
- [ 0.463012] SCSI subsystem initialized
- [ 0.463348] omap_device: omap2_mcspi.3: new worst case activate latency 0: 30517
- [ 0.463867] usbcore: registered new interface driver usbfs
- [ 0.463897] usbcore: registered new interface driver hub
- [ 0.463989] usbcore: registered new device driver usb
- [ 0.464294] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
- [ 0.486053] Skipping twl internal clock init and using bootloader value (unknown osc rate)
- [ 0.486480] twl6030: PIH (irq 39) chaining IRQs 368..387
- [ 0.508880] print_constraints: VUSB: 3300 mV normal standby
- [ 0.728851] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
- [ 0.729736] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
- [ 0.730194] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
- [ 0.730499] print_constraints: VANA: 2100 mV normal standby
- [ 0.730804] print_constraints: VCXIO: 1800 mV normal standby
- [ 0.731109] print_constraints: VDAC: 1800 mV normal standby
- [ 0.731536] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
- [ 0.731994] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
- [ 0.732299] print_constraints: CLK32KG:
- [ 0.744964] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
- [ 0.760223] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
- [ 0.775451] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
- [ 0.775878] Advanced Linux Sound Architecture Driver Version 1.0.23.
- [ 0.776214] Bluetooth: Core ver 2.15
- [ 0.776275] NET: Registered protocol family 31
- [ 0.776275] Bluetooth: HCI device and connection manager initialized
- [ 0.776275] Bluetooth: HCI socket layer initialized
- [ 0.776580] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.777130] NetLabel: Initializing
- [ 0.777130] NetLabel: domain hash size = 128
- [ 0.777160] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.777191] NetLabel: unlabeled traffic allowed by default
- [ 0.777343] Switching to clocksource 32k_counter
- [ 0.783081] Switched to NOHz mode on CPU #0
- [ 0.783416] Switched to NOHz mode on CPU #1
- [ 0.784729] AppArmor: AppArmor Filesystem Enabled
- [ 0.792480] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- [ 0.792572] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517
- [ 0.792785] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
- [ 0.793090] NET: Registered protocol family 2
- [ 0.793334] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.794158] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.795684] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.796508] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.796539] TCP reno registered
- [ 0.796539] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.796569] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.796936] NET: Registered protocol family 1
- [ 0.797271] RPC: Registered udp transport module.
- [ 0.797271] RPC: Registered tcp transport module.
- [ 0.797302] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.833038] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
- [ 0.833038] ipu-power initialized ipu, major: 252, minor: 0
- [ 0.833190] LTTng will clear ccnt top bit every 136 jiffies.
- [ 0.841308] omap-iommu omap-iommu.0: ducati registered
- [ 0.841369] omap-iommu omap-iommu.1: tesla registered
- [ 0.841613] iovmm-omap initialized ducati, major: 251, base-minor: 0
- [ 0.841735] iovmm-omap initialized tesla, major: 251, base-minor: 1
- [ 0.841888] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
- [ 0.842010] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 250, base-minor: 0
- [ 0.842041] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
- [ 0.842132] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 250, base-minor: 1
- [ 0.842163] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
- [ 0.842254] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 250, base-minor: 2
- [ 0.842529] audit: initializing netlink socket (disabled)
- [ 0.842559] type=2000 audit(0.851:1): initialized
- [ 0.917175] highmem bounce pool size: 64 pages
- [ 0.921905] VFS: Disk quotas dquot_6.5.2
- [ 0.922210] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.925537] msgmni has been set to 1490
- [ 0.926727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.926727] io scheduler noop registered
- [ 0.926727] io scheduler deadline registered
- [ 0.926788] io scheduler cfq registered (default)
- [ 0.988403] OMAP DSS rev 4.0
- [ 1.156372] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
- [ 1.253967] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
- [ 1.378997] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
- [ 2.429260] console [ttyO2] enabled
- [ 2.527435] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
- [ 2.652587] [drm] Initialized drm 1.1.0 20060810
- [ 2.657806] brd: module loaded
- [ 2.663299] loop: module loaded
- [ 2.666656] i2c-core: driver [bh1780] using legacy suspend method
- [ 2.673065] i2c-core: driver [bh1780] using legacy resume method
- [ 2.679443] (stk) :sysfs entries created
- [ 2.683563] (stk) : debugfs entries created
- [ 2.688720] omap_device: omap_i2c.1: new worst case activate latency 0: 30517
- [ 2.698059] usbcore: registered new interface driver smsc95xx
- [ 2.704132] cdc_ncm: 7-Feb-2011
- [ 2.707458] usbcore: registered new interface driver cdc_ncm
- [ 2.713500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.720489] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- [ 2.726440] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- [ 2.769714] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
- [ 2.785217] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- [ 2.791381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.798492] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.806091] usb usb1: Product: OMAP-EHCI Host Controller
- [ 2.811676] usb usb1: Manufacturer: Linux 2.6.38.4 ehci_hcd
- [ 2.817504] usb usb1: SerialNumber: ehci-omap.0
- [ 2.822662] hub 1-0:1.0: USB hub found
- [ 2.826629] hub 1-0:1.0: 3 ports detected
- [ 2.855560] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.862152] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
- [ 2.868377] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
- [ 2.918121] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
- [ 3.000244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.007385] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.014953] usb usb2: Product: OMAP3 OHCI Host Controller
- [ 3.020629] usb usb2: Manufacturer: Linux 2.6.38.4 ohci_hcd
- [ 3.026458] usb usb2: SerialNumber: ohci-omap3.0
- [ 3.031738] hub 2-0:1.0: USB hub found
- [ 3.035705] hub 2-0:1.0: 3 ports detected
- [ 3.040222] Initializing USB Mass Storage driver...
- [ 3.045440] usbcore: registered new interface driver usb-storage
- [ 3.051757] USB Mass Storage support registered.
- [ 3.056854] mousedev: PS/2 mouse device common for all mice
- [ 3.063446] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- [ 3.070037] twl_rtc twl_rtc: Power up reset detected.
- [ 3.076202] twl_rtc twl_rtc: Enabling TWL-RTC.
- [ 3.081146] i2c /dev entries driver
- [ 3.085388] lirc_dev: IR Remote Control driver registered, major 246
- [ 3.092163] Linux video capture interface: v2.00
- [ 3.098297] wl1273_fm_module_init
- [ 3.101989] Driver for 1-wire Dallas network protocol.
- [ 3.107513] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
- [ 3.116882] omap_device: omap_wdt.-1: new worst case activate latency 0: 61035
- [ 3.124938] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
- [ 3.131744] device-mapper: uevent: version 1.0.3
- [ 3.136871] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
- [ 3.145721] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
- [ 3.152465] usb 1-1: new high speed USB device number 2 using ehci-omap
- [ 3.159545] cpuidle: using governor ladder
- [ 3.163848] cpuidle: using governor menu
- [ 3.171966] proc4430_drv_initializeModule
- [ 3.176544] omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
- [ 3.185089] omap-devh initialized Tesla, major: 240, base-minor: 0
- [ 3.191925] omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
- [ 3.200469] omap-devh initialized SysM3, major: 240, base-minor: 1
- [ 3.207061] omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
- [ 3.215606] omap-devh initialized AppM3, major: 240, base-minor: 2
- [ 3.226440] SDP4430 SoC init
- [ 3.230743] asoc: null-codec-dai <-> MultiMedia1 mapping ok
- [ 3.237091] asoc: null-codec-dai <-> MultiMedia2 mapping ok
- [ 3.246917] asoc: null-codec-dai <-> Voice mapping ok
- [ 3.252716] asoc: null-codec-dai <-> Tones mapping ok
- [ 3.258514] asoc: null-codec-dai <-> Vibra mapping ok
- [ 3.263854] omap_device: omap-aess-audio.-1: new worst case activate latency 0: 30517
- [ 3.273468] omap_device: omap-aess-audio.-1: new worst case deactivate latency 0: 30517
- [ 3.283843] asoc: null-codec-dai <-> MODEM mapping ok
- [ 3.290100] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
- [ 3.297912] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- [ 3.312164] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 3.321014] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 3.328063] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.335632] mmc0: new SDHC card at address a929
- [ 3.340881] mmcblk0: mmc0:a929 SD04G 3.69 GiB
- [ 3.345581] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
- [ 3.345703] hub 1-1:1.0: USB hub found
- [ 3.357208] hub 1-1:1.0: 5 ports detected
- [ 3.358978] mmcblk0: p1 p2
- [ 3.367614] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
- [ 3.375091] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
- [ 3.384429] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
- [ 3.391693] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
- [ 3.398895] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
- [ 3.406188] asoc: twl6040-vib <-> mcpdm-vib mapping ok
- [ 3.413482] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- [ 3.420654] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- [ 3.427917] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
- [ 3.435302] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
- [ 3.443328] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
- [ 3.451385] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
- [ 3.459289] input: SDP4430 Headset Jack as /devices/platform/soc-audio.0/sound/card0/input0
- [ 3.470367] OMAP4 HDMI audio SoC init
- [ 3.475189] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok
- [ 3.478851] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 3.491729] ALSA device list:
- [ 3.494812] #0: TI OMAP4 SDP4430 Board
- [ 3.498931] #1: TI OMAP4 HDMI Board
- [ 3.503234] aufs 2.1-standalone.tree-38-rcN-20110207
- [ 3.505340] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 3.506591] mmc1: new SDIO card at address 0001
- [ 3.518951] oprofile: hardware counters not available
- [ 3.524261] oprofile: using timer interrupt.
- [ 3.529693] TCP cubic registered
- [ 3.533630] NET: Registered protocol family 10
- [ 3.540313] NET: Registered protocol family 17
- [ 3.545166] lib80211: common routines for IEEE802.11 drivers
- [ 3.551147] Registering the dns_resolver key type
- [ 3.556091] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
- [ 3.564178] ThumbEE CPU extension supported.
- [ 3.568695] Registering SWP/SWPB emulation handler
- [ 3.576080] omap2_set_init_voltage: Invalid parameters!
- [ 3.581573] omap2_set_init_voltage: Unable to put vdd_iva to its init voltage
- [ 3.581573]
- [ 3.590637] Power Management for TI OMAP4.
- [ 3.599914] registered taskstats version 1
- [ 3.636444] regulator_init_complete: CLK32KG: incomplete constraints, leaving on
- [ 3.644378] regulator_init_complete: VAUX3_6030: incomplete constraints, leaving on
- [ 3.652557] regulator_init_complete: VAUX2_6030: incomplete constraints, leaving on
- [ 3.660888] usb 1-1.1: new high speed USB device number 3 using ehci-omap
- [ 3.668029] regulator_init_complete: VDAC: incomplete constraints, leaving on
- [ 3.675659] regulator_init_complete: VCXIO: incomplete constraints, leaving on
- [ 3.683502] regulator_init_complete: VANA: incomplete constraints, leaving on
- [ 3.691131] regulator_init_complete: VPP: incomplete constraints, leaving on
- [ 3.698699] regulator_init_complete: VUSB: incomplete constraints, leaving on
- [ 3.707275] omapdss DPI: Could not find exact pixel clock. Requested 23500 kHz, got 23630 kHz
- [ 4.004150] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 4.011352] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.021636] smsc95xx v1.0.4
- [ 4.714904] omap_i2c omap_i2c.3: controller timed out
- [ 4.863311] omapdss DISPC error: timeout waiting for EVSYNC
- [ 5.972717] omap_i2c omap_i2c.3: controller timed out
- [ 6.083892] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2e:40:ea:f7:3a:0a
- [ 6.616912] usb 1-1.2: new low speed USB device number 4 using ehci-omap
- [ 6.988342] omap_i2c omap_i2c.3: controller timed out
- [ 7.004241] omapdss HDMI error: Invalid timing entered
- [ 7.009704] omapdss error: Timing cannot be applied
- [ 7.014892] omapdss HDMI error: Invalid timing entered
- [ 7.020355] usb 1-1.2: New USB device found, idVendor=1113, idProduct=3163
- [ 7.027587] omapdss error: Timing cannot be applied
- [ 7.032714] omapdss HDMI error: Invalid timing entered
- [ 7.038116] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 7.045776] usb 1-1.2: Product: MEDION MD 86360
- [ 7.050842] omapdss error: Timing cannot be applied
- [ 7.055999] omapdss HDMI error: Invalid timing entered
- [ 7.061920] omapdss error: Timing cannot be applied
- [ 7.067108] omapdss HDMI error: Invalid timing entered
- [ 7.072479] omapdss error: Timing cannot be applied
- [ 7.077606] omapdss HDMI error: Invalid timing entered
- [ 7.083038] omapdss error: Timing cannot be applied
- [ 7.088165] omapdss HDMI error: Invalid timing entered
- [ 7.093566] omapdss error: Timing cannot be applied
- [ 7.098663] omapdss HDMI error: Invalid timing entered
- [ 7.104064] omapdss error: Timing cannot be applied
- [ 7.109191] omapdss HDMI error: Invalid timing entered
- [ 7.114562] omapdss error: Timing cannot be applied
- [ 7.119689] omapdss HDMI error: Invalid timing entered
- [ 7.125091] omapdss error: Timing cannot be applied
- [ 7.130279] omapdss HDMI error: Invalid timing entered
- [ 7.135681] omapdss error: Timing cannot be applied
- [ 7.140777] omapdss HDMI error: Invalid timing entered
- [ 7.146179] omapdss error: Timing cannot be applied
- [ 7.151306] omapdss HDMI error: Invalid timing entered
- [ 7.156677] omapdss error: Timing cannot be applied
- [ 7.161804] omapdss HDMI error: Invalid timing entered
- [ 7.167205] omapdss error: Timing cannot be applied
- [ 7.172332] omapdss HDMI error: Invalid timing entered
- [ 7.177703] omapdss error: Timing cannot be applied
- [ 7.182830] omapdss HDMI error: Invalid timing entered
- [ 7.188232] omapdss error: Timing cannot be applied
- [ 7.193328] omapdss HDMI error: Invalid timing entered
- [ 7.198730] omapdss error: Timing cannot be applied
- [ 7.203857] omapdss HDMI error: Invalid timing entered
- [ 7.209259] omapdss error: Timing cannot be applied
- [ 7.214355] omapdss HDMI error: Invalid timing entered
- [ 7.219757] omapdss error: Timing cannot be applied
- [ 7.225006] omapdss HDMI error: Invalid timing entered
- [ 7.230407] omapdss error: Timing cannot be applied
- [ 7.235534] omapdss HDMI error: Invalid timing entered
- [ 7.240936] omapdss error: Timing cannot be applied
- [ 7.246032] omapdss HDMI error: Invalid timing entered
- [ 7.251434] omapdss error: Timing cannot be applied
- [ 7.256561] omapdss HDMI error: Invalid timing entered
- [ 7.261962] omapdss error: Timing cannot be applied
- [ 7.267089] omapdss HDMI error: Invalid timing entered
- [ 7.272460] omapdss error: Timing cannot be applied
- [ 7.457092] omapdss DISPC error: timeout waiting for EVSYNC
- [ 7.558654] omapdss DISPC error: timeout waiting for EVSYNC
- [ 7.691589] omapdss DISPC error: timeout waiting for EVSYNC
- [ 7.792999] omapdss DISPC error: timeout waiting for EVSYNC
- [ 7.800811] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 7.819152] Console: switching to colour frame buffer device 240x67
- [ 7.881256] fb0: omap_gpu frame buffer device
- [ 7.885833] drm: registered panic notifier
- [ 7.890136] [drm] Initialized omap_gpu 1.0.0 20110403 on minor 0
- [ 7.897186] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:04 UTC (946684804)
- [ 7.905700] omapdss DISPC error: timeout waiting for EVSYNC
- [ 8.011779] omapdss DISPC error: timeout waiting for EVSYNC
- [ 8.175842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 8.277374] omapdss DISPC error: timeout waiting for EVSYNC
- [ 8.283264] omap_vout omap_vout: Buffer Size = 3686400
- [ 8.288665] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 8.295867] omap_vout omap_vout: : registered and initialized video device 1
- [ 8.303283] omap_vout omap_vout: Buffer Size = 3686400
- [ 8.309692] omap_vout omap_vout: : registered and initialized video device 2
- [ 8.321228] EXT3-fs: barriers not enabled
- [ 8.402404] omapdss DISPC error: timeout waiting for EVSYNC
- [ 8.503967] omapdss DISPC error: timeout waiting for EVSYNC
- [ 8.699279] omapdss DISPC error: timeout waiting for EVSYNC
- [ 8.800842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 8.808166] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 8.910339] omapdss DISPC error: timeout waiting for EVSYNC
- [ 9.011749] omapdss DISPC error: timeout waiting for EVSYNC
- [ 9.199279] omapdss DISPC error: timeout waiting for EVSYNC
- [ 9.300811] omapdss DISPC error: timeout waiting for EVSYNC
- [ 9.307373] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 9.410186] omapdss DISPC error: timeout waiting for EVSYNC
- [ 9.511810] omapdss DISPC error: timeout waiting for EVSYNC
- [ 9.714904] omapdss DISPC error: timeout waiting for EVSYNC
- [ 9.816467] omapdss DISPC error: timeout waiting for EVSYNC
- [ 9.823242] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 9.925842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 10.027435] omapdss DISPC error: timeout waiting for EVSYNC
- [ 10.214904] omapdss DISPC error: timeout waiting for EVSYNC
- [ 10.316589] omapdss DISPC error: timeout waiting for EVSYNC
- [ 10.323150] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 10.425842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 10.527404] omapdss DISPC error: timeout waiting for EVSYNC
- [ 10.714874] omapdss DISPC error: timeout waiting for EVSYNC
- [ 10.816436] omapdss DISPC error: timeout waiting for EVSYNC
- [ 10.822967] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 10.925842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 11.027435] omapdss DISPC error: timeout waiting for EVSYNC
- [ 11.214904] omapdss DISPC error: timeout waiting for EVSYNC
- [ 11.316467] omapdss DISPC error: timeout waiting for EVSYNC
- [ 11.322998] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 11.425842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 11.527404] omapdss DISPC error: timeout waiting for EVSYNC
- [ 11.714874] omapdss DISPC error: timeout waiting for EVSYNC
- [ 11.816619] omapdss DISPC error: timeout waiting for EVSYNC
- [ 11.823150] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 11.925842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 12.027374] omapdss DISPC error: timeout waiting for EVSYNC
- [ 12.214904] omapdss DISPC error: timeout waiting for EVSYNC
- [ 12.316467] omapdss DISPC error: timeout waiting for EVSYNC
- [ 12.322998] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 12.425811] omapdss DISPC error: timeout waiting for EVSYNC
- [ 12.527404] omapdss DISPC error: timeout waiting for EVSYNC
- [ 12.714904] omapdss DISPC error: timeout waiting for EVSYNC
- [ 12.816467] omapdss DISPC error: timeout waiting for EVSYNC
- [ 12.822998] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 12.925842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 13.027374] omapdss DISPC error: timeout waiting for EVSYNC
- [ 13.214904] omapdss DISPC error: timeout waiting for EVSYNC
- [ 13.316589] omapdss DISPC error: timeout waiting for EVSYNC
- [ 13.323150] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 13.425842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 13.527404] omapdss DISPC error: timeout waiting for EVSYNC
- [ 13.714904] omapdss DISPC error: timeout waiting for EVSYNC
- [ 13.816467] omapdss DISPC error: timeout waiting for EVSYNC
- [ 13.823089] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 13.925842] omapdss DISPC error: timeout waiting for EVSYNC
- [ 14.027404] omapdss DISPC error: timeout waiting for EVSYNC
- [ 14.214904] omapdss DISPC error: timeout waiting for EVSYNC
- [ 14.316467] omapdss DISPC error: timeout waiting for EVSYNC
- [ 14.322998] omapdss DISPC error: SYNC_LOST_DIGIT, disabling TV
- [ 14.425842] omapdss DISPC error: timeout waiting for EVSYNC
Add Comment
Please, Sign In to add comment