Build: generic/full_msm/msm/msm:2.2.1/FRX04/eng.bryan.20110121.213411:eng/release-keys
Hardware: msm
Bootloader: unknown
Radio: unknown
Kernel: Linux version 2.6.27.46-01258-gf9e4956-dirty (root@wireless251) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #5 PREEMPT Tue Feb 15 22:43:52 PST 2011

[[TRUNCATED]]
] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  706.381286] [RPC] READ on ept d3af6140
[  706.381347] [RPC] READ on ept d3af6140 (584 bytes)
[  706.382873] [RPC] REPLY to xid=590 @ id=0:00000001 (28 bytes)
[  706.930999] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  706.931243] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  706.931335] [RR] x RESUME_TX id=1:d3af6140
[  706.931365] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  706.961761] [RPC] READ on ept d3af6140
[  706.961822] [RPC] READ on ept d3af6140 (584 bytes)
[  707.097045] [RPC] REPLY to xid=591 @ id=0:00000001 (28 bytes)
[  707.097412] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  707.107055] [RR] o RESUME_TX id=0:00000001
[  707.107116] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  707.107208] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  707.107391] [RPC] READ on ept d3af6140
[  707.107421] [RPC] READ on ept d3af6140 (584 bytes)
[  707.125823] [RPC] REPLY to xid=592 @ id=0:00000001 (28 bytes)
[  707.127441] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  707.127807] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  707.128570] [RPC] READ on ept d3af6140
[  707.128631] [RPC] READ on ept d3af6140 (584 bytes)
[  707.130096] [RPC] REPLY to xid=593 @ id=0:00000001 (28 bytes)
[  707.392425] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  707.393371] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=32 dst=1:d3af6140
[  707.393432] [RR] x RESUME_TX id=1:d3af6140
[  707.393463] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  707.393646] [RPC] READ on ept d3af6140
[  707.393737] [RPC] READ on ept d3af6140 (28 bytes)
[  707.393890] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  707.394226] [RPC] READ on ept d3af6140
[  707.394256] [RPC] READ on ept d3af6140 (56 bytes)
[  707.394592] [RPC] REPLY to xid=594 @ id=0:00000001 (28 bytes)
[  707.395660] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  707.396545] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  707.396697] [RPC] READ on ept d3af6140
[  707.396728] [RPC] READ on ept d3af6140 (584 bytes)
[  707.398162] [RPC] REPLY to xid=595 @ id=0:00000001 (28 bytes)
[  707.398468] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  707.398559] [RR] o RESUME_TX id=0:00000001
[  707.932983] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  707.933105] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  707.933166] [RR] x RESUME_TX id=1:d3af6140
[  707.933227] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  707.973419] [RPC] READ on ept d3af6140
[  707.973480] [RPC] READ on ept d3af6140 (584 bytes)
[  708.061340] [RPC] REPLY to xid=596 @ id=0:00000001 (28 bytes)
[  708.066894] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  708.067291] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  708.067626] [RPC] READ on ept d3af6140
[  708.067718] [RPC] READ on ept d3af6140 (584 bytes)
[  708.132873] [RPC] REPLY to xid=597 @ id=0:00000001 (28 bytes)
[  708.135681] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  708.135833] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  708.136627] [RPC] READ on ept d3af6140
[  708.136718] [RPC] READ on ept d3af6140 (584 bytes)
[  708.195831] [RPC] REPLY to xid=598 @ id=0:00000001 (28 bytes)
[  708.410614] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  708.411590] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=32 dst=1:d3af6140
[  708.411651] [RR] x RESUME_TX id=1:d3af6140
[  708.411682] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  708.411865] [RPC] READ on ept d3af6140
[  708.411956] [RPC] READ on ept d3af6140 (28 bytes)
[  708.412384] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  708.412567] [RPC] READ on ept d3af6140
[  708.412597] [RPC] READ on ept d3af6140 (56 bytes)
[  708.412933] [RPC] REPLY to xid=599 @ id=0:00000001 (28 bytes)
[  708.413208] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  708.413391] [RR] o RESUME_TX id=0:00000001
[  708.414306] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  708.414367] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  708.414489] [RPC] READ on ept d3af6140
[  708.414550] [RPC] READ on ept d3af6140 (584 bytes)
[  708.415985] [RPC] REPLY to xid=59a @ id=0:00000001 (28 bytes)
[  708.930023] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  708.930114] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  708.931060] [RR] x RESUME_TX id=1:d3af6140
[  708.931091] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  708.931274] [RPC] READ on ept d3af6140
[  708.931304] [RPC] READ on ept d3af6140 (584 bytes)
[  708.934570] [RPC] REPLY to xid=59b @ id=0:00000001 (28 bytes)
[  708.951751] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  708.951843] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  708.952056] [RPC] READ on ept d3af6140
[  708.952087] [RPC] READ on ept d3af6140 (584 bytes)
[  708.955963] [RPC] REPLY to xid=59c @ id=0:00000001 (28 bytes)
[  708.959472] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  708.959564] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  709.051239] [RPC] READ on ept d3af6140
[  709.051391] [RPC] READ on ept d3af6140 (584 bytes)
[  709.057189] [RPC] REPLY to xid=59d @ id=0:00000001 (28 bytes)
[  709.430236] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  709.430664] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  709.440246] [RR] o RESUME_TX id=0:00000001
[  709.440307] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=32 dst=1:d3af6140
[  709.440399] [RR] x RESUME_TX id=1:d3af6140
[  709.440429] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  709.440612] [RPC] READ on ept d3af6140
[  709.440643] [RPC] READ on ept d3af6140 (28 bytes)
[  709.450408] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  709.492736] [RPC] READ on ept d3af6140
[  709.492889] [RPC] READ on ept d3af6140 (56 bytes)
[  709.493377] [RPC] REPLY to xid=59e @ id=0:00000001 (28 bytes)
[  709.495452] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  709.495605] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  709.496673] [RPC] READ on ept d3af6140
[  709.496765] [RPC] READ on ept d3af6140 (584 bytes)
[  709.498474] [RPC] REPLY to xid=59f @ id=0:00000001 (28 bytes)
[  709.929809] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  709.939758] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  709.939971] [RR] x RESUME_TX id=1:d3af6140
[  709.940032] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  709.940429] [RPC] READ on ept d3af6140
[  709.940521] [RPC] READ on ept d3af6140 (584 bytes)
[  710.052490] [RPC] REPLY to xid=5a0 @ id=0:00000001 (28 bytes)
[  710.058074] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  710.058135] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  710.058349] [RPC] READ on ept d3af6140
[  710.058380] [RPC] READ on ept d3af6140 (584 bytes)
[  710.279846] [RPC] REPLY to xid=5a1 @ id=0:00000001 (28 bytes)
[  710.282958] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  710.283081] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  710.284820] [RPC] READ on ept d3af6140
[  710.284881] [RPC] READ on ept d3af6140 (584 bytes)
[  710.298858] [RPC] REPLY to xid=5a2 @ id=0:00000001 (28 bytes)
[  710.299255] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  710.299591] [RR] o RESUME_TX id=0:00000001
[  710.503631] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  710.514129] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=32 dst=1:d3af6140
[  710.514221] [RR] x RESUME_TX id=1:d3af6140
[  710.514251] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  710.514404] [RPC] READ on ept d3af6140
[  710.514465] [RPC] READ on ept d3af6140 (28 bytes)
[  710.524169] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  710.541412] [RPC] READ on ept d3af6140
[  710.541564] [RPC] READ on ept d3af6140 (56 bytes)
[  710.542114] [RPC] REPLY to xid=5a3 @ id=0:00000001 (28 bytes)
[  710.544158] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  710.544311] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  710.544799] [RPC] READ on ept d3af6140
[  710.544860] [RPC] READ on ept d3af6140 (584 bytes)
[  710.546936] [RPC] REPLY to xid=5a4 @ id=0:00000001 (28 bytes)
[  710.933380] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  710.933502] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  710.933563] [RR] x RESUME_TX id=1:d3af6140
[  710.933593] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  710.933807] [RPC] READ on ept d3af6140
[  710.933868] [RPC] READ on ept d3af6140 (584 bytes)
[  711.077819] [RPC] REPLY to xid=5a5 @ id=0:00000001 (28 bytes)
[  711.086791] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  711.086883] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  711.087066] [RPC] READ on ept d3af6140
[  711.087097] [RPC] READ on ept d3af6140 (584 bytes)
[  711.365447] [RPC] REPLY to xid=5a6 @ id=0:00000001 (28 bytes)
[  711.365814] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  711.366973] [RR] o RESUME_TX id=0:00000001
[  711.367034] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  711.375915] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  711.376129] [RPC] READ on ept d3af6140
[  711.376159] [RPC] READ on ept d3af6140 (584 bytes)
[  711.457305] [RPC] REPLY to xid=5a7 @ id=0:00000001 (28 bytes)
[  711.548309] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  711.549255] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=32 dst=1:d3af6140
[  711.549346] [RR] x RESUME_TX id=1:d3af6140
[  711.549377] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  711.549560] [RPC] READ on ept d3af6140
[  711.549621] [RPC] READ on ept d3af6140 (28 bytes)
[  711.550781] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  711.550964] [RPC] READ on ept d3af6140
[  711.550994] [RPC] READ on ept d3af6140 (56 bytes)
[  711.551330] [RPC] REPLY to xid=5a8 @ id=0:00000001 (28 bytes)
[  711.552429] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  711.552551] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  711.552673] [RPC] READ on ept d3af6140
[  711.552703] [RPC] READ on ept d3af6140 (584 bytes)
[  711.554168] [RPC] REPLY to xid=5a9 @ id=0:00000001 (28 bytes)
[  711.929870] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  711.929962] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  711.930847] [RR] x RESUME_TX id=1:d3af6140
[  711.930877] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  711.931060] [RPC] READ on ept d3af6140
[  711.931121] [RPC] READ on ept d3af6140 (584 bytes)
[  711.934326] [RPC] REPLY to xid=5aa @ id=0:00000001 (28 bytes)
[  711.935424] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  711.935455] [RR] o RESUME_TX id=0:00000001
[  711.952087] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  711.952178] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  711.957275] [RPC] READ on ept d3af6140
[  711.957336] [RPC] READ on ept d3af6140 (584 bytes)
[  711.961303] [RPC] REPLY to xid=5ab @ id=0:00000001 (28 bytes)
[  711.964935] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  711.965057] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  711.975097] [RPC] READ on ept d3af6140
[  711.975158] [RPC] READ on ept d3af6140 (584 bytes)
[  711.976623] [RPC] REPLY to xid=5ac @ id=0:00000001 (28 bytes)
[  712.572845] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  712.573760] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=32 dst=1:d3af6140
[  712.573822] [RR] x RESUME_TX id=1:d3af6140
[  712.573852] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  712.574066] [RPC] READ on ept d3af6140
[  712.574127] [RPC] READ on ept d3af6140 (28 bytes)
[  712.574462] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  712.574676] [RPC] READ on ept d3af6140
[  712.574707] [RPC] READ on ept d3af6140 (56 bytes)
[  712.575042] [RPC] REPLY to xid=5ad @ id=0:00000001 (28 bytes)
[  712.576354] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  712.577209] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  712.577331] [RPC] READ on ept d3af6140
[  712.577392] [RPC] READ on ept d3af6140 (584 bytes)
[  712.579132] [RPC] REPLY to xid=5ae @ id=0:00000001 (28 bytes)
[  712.580169] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  712.580200] [RR] o RESUME_TX id=0:00000001
[  712.931518] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  712.931732] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  712.931823] [RR] x RESUME_TX id=1:d3af6140
[  712.931884] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  712.932189] [RPC] READ on ept d3af6140
[  712.932250] [RPC] READ on ept d3af6140 (584 bytes)
[  712.937255] [RPC] REPLY to xid=5af @ id=0:00000001 (28 bytes)
[  712.954803] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  712.954986] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  712.958404] [RPC] READ on ept d3af6140
[  712.958526] [RPC] READ on ept d3af6140 (584 bytes)
[  712.964599] [RPC] REPLY to xid=5b0 @ id=0:00000001 (28 bytes)
[  712.969696] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  712.969879] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  712.983612] [RPC] READ on ept d3af6140
[  712.983734] [RPC] READ on ept d3af6140 (584 bytes)
[  713.031921] [RPC] REPLY to xid=5b1 @ id=0:00000001 (28 bytes)
[  713.593048] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  713.593963] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=32 dst=1:d3af6140
[  713.594055] [RR] x RESUME_TX id=1:d3af6140
[  713.594085] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  713.594299] [RPC] READ on ept d3af6140
[  713.594390] [RPC] READ on ept d3af6140 (28 bytes)
[  713.594940] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  713.595184] [RPC] READ on ept d3af6140
[  713.595214] [RPC] READ on ept d3af6140 (56 bytes)
[  713.595642] [RPC] REPLY to xid=5b2 @ id=0:00000001 (28 bytes)
[  713.596649] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  713.596710] [RR] o RESUME_TX id=0:00000001
[  713.597534] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  713.597625] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  713.597808] [RPC] READ on ept d3af6140
[  713.597869] [RPC] READ on ept d3af6140 (584 bytes)
[  713.600311] [RPC] REPLY to xid=5b3 @ id=0:00000001 (28 bytes)
[  713.768096] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  713.787353] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  713.807861] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  713.828369] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  713.848846] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  713.869323] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  713.889587] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  713.909973] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  713.929840] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  713.930755] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  713.930938] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  713.931091] [RR] x RESUME_TX id=1:d3af6140
[  713.931152] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  713.931427] [RPC] READ on ept d3af6140
[  713.931518] [RPC] READ on ept d3af6140 (584 bytes)
[  713.936889] [RPC] REPLY to xid=5b4 @ id=0:00000001 (28 bytes)
[  713.950958] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  713.952514] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  713.952728] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  713.971130] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  713.991424] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  714.001190] [RPC] READ on ept d3af6140
[  714.001281] [RPC] READ on ept d3af6140 (584 bytes)
[  714.014129] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  714.035461] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  714.039733] [RPC] REPLY to xid=5b5 @ id=0:00000001 (28 bytes)
[  714.041717] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  714.041900] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  714.051971] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  714.056976] request_suspend_state: sleep (0->3) at 701600000000 (2011-02-16 16:41:59.096000000 UTC)
[  714.057067] Sending arm9_low_speed 2
[  714.073852] [RPC] READ on ept d3af6140
[  714.073944] [RPC] READ on ept d3af6140 (584 bytes)
[  714.098419] novtec_blank
[  714.098480] novtec_suspend
[  714.115142] [RPC] REPLY to xid=5b6 @ id=0:00000001 (28 bytes)
[  714.207336] htcrhod_mddi_power_client (off)
[  714.207580] mddi_suspended
[  714.207641] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[  714.209930] active wake lock PowerManagerService
[  714.209960] active wake lock evdev, time left 499
[  714.481140] [RPC] CALL to 3000005b:0 @ 0:00000001 (56 bytes)
[  714.481536] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  714.481567] [RR] o RESUME_TX id=0:00000001
[  714.483673] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=32 dst=1:d3af6140
[  714.483764] [RR] x RESUME_TX id=1:d3af6140
[  714.483795] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  714.483978] [RPC] READ on ept d3af6140
[  714.484008] [RPC] READ on ept d3af6140 (28 bytes)
[  714.484222] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  714.566833] [RPC] READ on ept d3af6140
[  714.566894] [RPC] READ on ept d3af6140 (56 bytes)
[  714.644470] request_suspend_state: wakeup (3->0) at 702180000000 (2011-02-16 16:41:59.676000000 UTC)
[  714.644683] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[  714.644683] novtec_resume
[  714.644744] htcrhod_mddi_power_client (on)
[  714.665252] mddi_resumed
[  714.699768] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  714.705596] [RPC] REPLY to xid=5b7 @ id=0:00000001 (28 bytes)
[  714.895751] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  714.896942] hw3d_late_resume: resuming
[  714.896972] tssc_manager_resume(): ts->use_irq=1
[  714.897033] Sending arm9_low_speed 7
[  714.916717] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  714.946838] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  714.957061] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  714.978881] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  715.003540] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  715.021667] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  715.037628] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  715.057922] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  715.077850] novtec_unblank
[  715.097747] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  715.108154] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  715.128265] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  715.148468] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  715.169006] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  716.330596] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  716.334594] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=32 dst=1:d3af6140
[  716.334716] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  716.334899] [RPC] READ on ept d3af6140
[  716.334960] [RPC] READ on ept d3af6140 (28 bytes)
[  716.404724] [RPC] READ on ept d3af6140
[  716.404846] [RPC] READ on ept d3af6140 (56 bytes)
[  716.405273] [RPC] REPLY to xid=5b8 @ id=0:00000001 (28 bytes)
[  716.415466] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  716.415618] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  716.415710] [RR] x RESUME_TX id=1:d3af6140
[  716.415771] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  716.479797] [RPC] READ on ept d3af6140
[  716.479949] [RPC] READ on ept d3af6140 (584 bytes)
[  716.491790] [RPC] REPLY to xid=5b9 @ id=0:00000001 (28 bytes)
[  716.929351] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  716.932525] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  716.932769] [RPC] READ on ept d3af6140
[  716.932800] [RPC] READ on ept d3af6140 (584 bytes)
[  716.996185] [RPC] REPLY to xid=5ba @ id=0:00000001 (28 bytes)
[  716.996551] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  717.006195] [RR] o RESUME_TX id=0:00000001
[  717.006256] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  717.006347] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  717.006530] [RPC] READ on ept d3af6140
[  717.006591] [RPC] READ on ept d3af6140 (584 bytes)
[  717.027130] [RPC] REPLY to xid=5bb @ id=0:00000001 (28 bytes)
[  717.030120] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=488 dst=1:d3af6140
[  717.030242] [RR] x RESUME_TX id=1:d3af6140
[  717.030303] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  717.033233] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  717.035705] [RPC] READ on ept d3af6140
[  717.035766] [RPC] READ on ept d3af6140 (584 bytes)
[  717.038391] [RPC] REPLY to xid=5bc @ id=0:00000001 (28 bytes)
[  717.415069] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  717.415954] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=32 dst=1:d3af6140
[  717.416381] [RPC] READ on ept d3af6140
[  717.416442] [RPC] READ on ept d3af6140 (28 bytes)
[  717.416870] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  717.417053] [RPC] READ on ept d3af6140
[  717.417114] [RPC] READ on ept d3af6140 (56 bytes)
[  717.417541] [RPC] REPLY to xid=5bd @ id=0:00000001 (28 bytes)
[  717.418609] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  717.418731] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  717.418792] [RR] x RESUME_TX id=1:d3af6140
[  717.418853] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  717.419006] [RPC] READ on ept d3af6140
[  717.419067] [RPC] READ on ept d3af6140 (584 bytes)
[  717.421386] [RPC] REPLY to xid=5be @ id=0:00000001 (28 bytes)
[  717.421722] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  717.421783] [RR] o RESUME_TX id=0:00000001
[  717.931854] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  717.932037] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  717.934631] [RPC] READ on ept d3af6140
[  717.934753] [RPC] READ on ept d3af6140 (584 bytes)
[  717.939941] [RPC] REPLY to xid=5bf @ id=0:00000001 (28 bytes)
[  717.955383] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  717.955535] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  717.955810] [RPC] READ on ept d3af6140
[  717.955902] [RPC] READ on ept d3af6140 (584 bytes)
[  717.961883] [RPC] REPLY to xid=5c0 @ id=0:00000001 (28 bytes)
[  717.966949] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=488 dst=1:d3af6140
[  717.967071] [RR] x RESUME_TX id=1:d3af6140
[  717.967132] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  717.969482] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  717.983825] [RPC] READ on ept d3af6140
[  717.983917] [RPC] READ on ept d3af6140 (584 bytes)
[  718.057769] [RPC] REPLY to xid=5c1 @ id=0:00000001 (28 bytes)
[  718.428955] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  718.433959] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=32 dst=1:d3af6140
[  718.434143] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  718.434448] [RPC] READ on ept d3af6140
[  718.434509] [RPC] READ on ept d3af6140 (28 bytes)
[  718.438903] [RPC] READ on ept d3af6140
[  718.439025] [RPC] READ on ept d3af6140 (56 bytes)
[  718.439605] [RPC] REPLY to xid=5c2 @ id=0:00000001 (28 bytes)
[  718.440155] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  718.440246] [RR] o RESUME_TX id=0:00000001
[  718.441070] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  718.441680] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  718.441772] [RR] x RESUME_TX id=1:d3af6140
[  718.441833] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  718.443176] [RPC] READ on ept d3af6140
[  718.443298] [RPC] READ on ept d3af6140 (584 bytes)
[  718.445434] [RPC] REPLY to xid=5c3 @ id=0:00000001 (28 bytes)
[  718.929901] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  718.930084] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  718.930389] [RPC] READ on ept d3af6140
[  718.930572] [RPC] READ on ept d3af6140 (584 bytes)
[  718.935516] [RPC] REPLY to xid=5c4 @ id=0:00000001 (28 bytes)
[  718.951538] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  718.951721] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  718.952026] [RPC] READ on ept d3af6140
[  718.952117] [RPC] READ on ept d3af6140 (584 bytes)
[  718.958007] [RPC] REPLY to xid=5c5 @ id=0:00000001 (28 bytes)
[  718.959808] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=488 dst=1:d3af6140
[  718.959930] [RR] x RESUME_TX id=1:d3af6140
[  718.959991] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  718.963470] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  718.985260] [RPC] READ on ept d3af6140
[  718.985351] [RPC] READ on ept d3af6140 (584 bytes)
[  718.988250] [RPC] REPLY to xid=5c6 @ id=0:00000001 (28 bytes)
[  719.461608] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  719.462463] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  719.462524] [RR] o RESUME_TX id=0:00000001
[  719.463684] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=32 dst=1:d3af6140
[  719.463928] [RPC] READ on ept d3af6140
[  719.464019] [RPC] READ on ept d3af6140 (28 bytes)
[  719.464294] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  719.464691] [RPC] READ on ept d3af6140
[  719.464752] [RPC] READ on ept d3af6140 (56 bytes)
[  719.465270] [RPC] REPLY to xid=5c7 @ id=0:00000001 (28 bytes)
[  719.466644] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  719.466796] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  719.466888] [RR] x RESUME_TX id=1:d3af6140
[  719.466949] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  719.467163] [RPC] READ on ept d3af6140
[  719.467285] [RPC] READ on ept d3af6140 (584 bytes)
[  719.470153] [RPC] REPLY to xid=5c8 @ id=0:00000001 (28 bytes)
[  719.931854] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  719.939941] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  719.940277] [RPC] READ on ept d3af6140
[  719.940338] [RPC] READ on ept d3af6140 (584 bytes)
[  719.970428] [RPC] REPLY to xid=5c9 @ id=0:00000001 (28 bytes)
[  719.979766] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  719.979919] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  720.010681] [RPC] READ on ept d3af6140
[  720.010772] [RPC] READ on ept d3af6140 (584 bytes)
[  720.056427] [RPC] REPLY to xid=5ca @ id=0:00000001 (28 bytes)
[  720.058258] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=488 dst=1:d3af6140
[  720.058441] [RR] x RESUME_TX id=1:d3af6140
[  720.058502] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  720.058959] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  720.060699] [RPC] READ on ept d3af6140
[  720.060791] [RPC] READ on ept d3af6140 (584 bytes)
[  720.064941] [RPC] REPLY to xid=5cb @ id=0:00000001 (28 bytes)
[  720.065338] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  720.065429] [RR] o RESUME_TX id=0:00000001
[  720.459533] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  720.480133] [RPC] CALL to 3000005b:0 @ 0:00000001 (152 bytes)
[  720.481018] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=32 dst=1:d3af6140
[  720.481262] [RPC] READ on ept d3af6140
[  720.481353] [RPC] READ on ept d3af6140 (28 bytes)
[  720.481567] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  720.481933] [RPC] READ on ept d3af6140
[  720.481994] [RPC] READ on ept d3af6140 (56 bytes)
[  720.482421] [RPC] REPLY to xid=5cc @ id=0:00000001 (28 bytes)
[  720.485473] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  720.485595] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  720.485656] [RR] x RESUME_TX id=1:d3af6140
[  720.485717] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  720.485870] [RPC] READ on ept d3af6140
[  720.485931] [RPC] READ on ept d3af6140 (584 bytes)
[  720.488250] [RPC] REPLY to xid=5cd @ id=0:00000001 (28 bytes)
[  720.510772] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  720.561950] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  720.612823] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  720.929229] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  720.932373] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  720.932678] [RPC] READ on ept d3af6140
[  720.932739] [RPC] READ on ept d3af6140 (584 bytes)
[  720.987640] [RPC] CALL to 3000005b:0 @ 0:00000001 (56 bytes)
[  720.993499] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=32 dst=1:d3af6140
[  721.077331] [RPC] REPLY to xid=5ce @ id=0:00000001 (28 bytes)
[  721.077545] [RPC] READ on ept d3af6140
[  721.077575] [RPC] READ on ept d3af6140 (28 bytes)
[  721.077667] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  721.078552] [RR] o RESUME_TX id=0:00000001
[  721.081085] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  721.081146] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  721.081176] [RR] x RESUME_TX id=1:d3af6140
[  721.081207] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  721.229217] [RPC] READ on ept d3af6140
[  721.229278] [RPC] READ on ept d3af6140 (584 bytes)
[  721.561553] [RPC] REPLY to xid=5cf @ id=0:00000001 (28 bytes)
[  721.568206] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  721.568359] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=104 dst=1:d3af6140
[  721.568664] [RPC] READ on ept d3af6140
[  721.568756] [RPC] READ on ept d3af6140 (584 bytes)
[  721.661621] [RPC] REPLY to xid=5d0 @ id=0:00000001 (28 bytes)
[  721.663238] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=60 dst=1:d3af6140
[  721.663452] [RPC] READ on ept d3af6140
[  721.663482] [RPC] READ on ept d3af6140 (56 bytes)
[  721.665557] [RPC] REPLY to xid=5d1 @ id=0:00000001 (28 bytes)
[  722.058197] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  722.073852] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  722.093994] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  722.114349] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  722.134765] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  722.155181] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  722.175964] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  722.196289] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  722.216827] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  722.237091] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  722.257476] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  722.277923] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  722.298767] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  722.318847] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  722.339263] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  722.339935] msm_i2c msm_i2c.0: error, status 63c8
[  722.339996] msm_i2c msm_i2c.0: Error during data xfer (-5)
[  722.359039] micropklt, i2c write retry
[  722.360626] request_suspend_state: sleep (0->3) at 709790000000 (2011-02-16 16:42:07.286000000 UTC)
[  722.360778] Sending arm9_low_speed 2
[  722.391754] novtec_blank
[  722.391845] novtec_suspend
[  722.489318] htcrhod_mddi_power_client (off)
[  722.489593] mddi_suspended
[  722.489654] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[  725.016021] active wake lock PowerManagerService
[  725.016113] active wake lock evdev, time left 254
[  725.016143] active wake lock evdev, time left 254
[  726.954132] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=488 dst=1:d3af6140
[  726.964782] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=104 dst=1:d3af6140
[  726.964935] [RR] x RESUME_TX id=1:d3af6140
[  726.964996] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6140 id=-1073487444:c03269ac
[  726.965301] [RPC] READ on ept d3af6140
[  726.965393] [RPC] READ on ept d3af6140 (584 bytes)
[  727.093048] [RPC] REPLY to xid=5d2 @ id=0:00000001 (28 bytes)
[  802.549896] request_suspend_state: wakeup (3->0) at 788470000000 (2011-02-16 16:43:25.966000000 UTC)
[  802.550079] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[  802.550140] novtec_resume
[  802.550231] htcrhod_mddi_power_client (on)
[  802.556427] mddi_resumed
[  802.594146] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  802.797729] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  802.808258] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  802.838409] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  802.869934] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  802.909851] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  802.918212] hw3d_late_resume: resuming
[  802.918243] tssc_manager_resume(): ts->use_irq=1
[  802.918304] Sending arm9_low_speed 7
[  802.926361] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  802.938873] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  802.958953] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  802.979278] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  803.000640] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  803.020477] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  803.041076] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  803.061645] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  803.082519] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  806.552429] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  806.572937] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  806.593170] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  806.613586] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  806.633972] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  806.654418] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  806.674835] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  806.695251] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  806.715576] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  806.736145] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  806.756591] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  806.776916] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  806.797454] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  806.817718] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  806.838134] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  806.839263] msm_i2c msm_i2c.0: error, status c8
[  806.839355] msm_i2c msm_i2c.0: Error during data xfer (-5)
[  806.857910] micropklt, i2c write retry
[  806.859436] request_suspend_state: sleep (0->3) at 792700000000 (2011-02-16 16:43:30.196000000 UTC)
[  806.859588] Sending arm9_low_speed 2
[  806.869903] request_suspend_state: wakeup (3->0) at 792710000000 (2011-02-16 16:43:30.206000000 UTC)
[  806.890594] novtec_blank
[  806.890655] novtec_suspend
[  806.974792] htcrhod_mddi_power_client (off)
[  806.975006] mddi_suspended
[  806.975036] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[  806.980072] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[  806.980133] novtec_resume
[  806.980194] htcrhod_mddi_power_client (on)
[  806.986602] mddi_resumed
[  807.082214] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  807.100402] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  807.120483] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  807.150787] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  807.171905] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  807.190734] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  807.210906] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  807.230804] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  807.250915] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  807.273559] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  807.301452] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  807.321990] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  807.341156] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  807.355407] hw3d_late_resume: resuming
[  807.355438] tssc_manager_resume(): ts->use_irq=1
[  807.355468] Sending arm9_low_speed 7
[  807.361541] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  807.382324] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  808.953552] novtec_unblank
[  813.791015] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=484 dst=1:d3af6140
[  813.791320] [RPC] READ on ept d3af6140
[  813.791381] [RPC] READ on ept d3af6140 (480 bytes)
[  813.795318] [RPC] REPLY to xid=5d3 @ id=0:00000001 (28 bytes)
[  813.795654] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  813.795745] [RR] o RESUME_TX id=0:00000001
[  814.598297] pmem: requested data from file descriptor that doesn't exist.<6>get_msm_hw3d_file: requested data from file descriptor that doesn't exist.<3>mdp_ppp: could not retrieve src image from memory
[  824.290130] ++ IN CALL: 0x6 ++
[  824.303497] snd_ioctl set_device: device 0
[  824.569763] +++ msm_setup_audio -- 0x6
[  824.570892] msm_setup_audio - Param is: PHONE_EARCUPLE_VOL1
[  824.570953] turn_mic_bias_on(1)
[  824.571044] --- msm_setup_audio -- 0x6
[  824.571075] snd_set_device 0 0 0
[  824.571105] [RPC] CALL to 30000002:-1440015804 @ 0:00000001 (60 bytes)
[  824.571136] [RPC] READ on ept d3af6980
[  824.572753] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d3af6980
[  824.572845] [RPC] READ on ept d3af6980 (24 bytes)
[  824.694976] request_suspend_state: wakeup (0->0) at 810270000000 (2011-02-16 16:43:47.766000000 UTC)
[  878.800598] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  878.833770] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  878.852508] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  878.878631] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  878.891113] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  878.911712] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  878.931854] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  878.954559] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  878.975311] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  878.994964] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  879.013977] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  879.036376] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  879.056762] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  879.075897] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  879.096496] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  879.117156] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  879.137847] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  879.161132] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  885.959350] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  885.978851] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  885.999328] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  886.020568] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  886.021759] msm_i2c msm_i2c.0: error, status c8
[  886.021820] msm_i2c msm_i2c.0: Error during data xfer (-5)
[  886.050170] micropklt, i2c write retry
[  886.060913] request_suspend_state: sleep (0->3) at 870330000000 (2011-02-16 16:44:47.826000000 UTC)
[  886.061065] Sending arm9_low_speed 2
[  886.092041] novtec_blank
[  886.092132] novtec_suspend
[  886.168457] htcrhod_mddi_power_client (off)
[  886.168731] mddi_suspended
[  886.168762] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[  886.171295] active wake lock PowerManagerService
[  886.171356] active wake lock evdev, time left 499
[  992.416229] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  992.419342] request_suspend_state: wakeup (3->0) at 974660000000 (2011-02-16 16:46:32.156000000 UTC)
[  992.419738] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[  992.419769] novtec_resume
[  992.419830] htcrhod_mddi_power_client (on)
[  992.426483] mddi_resumed
[  992.434906] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  992.466461] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  992.467010] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  992.479125] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  992.499786] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[  992.517425] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  992.548309] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  992.567962] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  992.588500] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[  992.608001] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  992.629333] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  992.651245] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  992.670410] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[  992.696411] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  992.715972] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  992.733306] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  992.773437] request_suspend_state: wakeup (0->0) at 975010000000 (2011-02-16 16:46:32.506000000 UTC)
[  992.848419] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  992.855255] hw3d_late_resume: resuming
[  992.855316] tssc_manager_resume(): ts->use_irq=1
[  992.855407] Sending arm9_low_speed 7
[  992.947509] -- END CALL : 0x0--
[  992.947570] END CALL triggered without being in a call!
[  992.947570] This really shouldn't happen
[  993.010192] novtec_unblank
[  993.225555] audio_enable()
[  993.225616] ++++++++++++++++++++++++++++++
[  993.225646] +++ Audio Out: 0x1 +++
[  993.225677] [RPC] CALL to 30000013:0 @ 0:00000001 (72 bytes)
[  993.226867] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c2c55180
[  993.227020] [RPC] READ on ept c2c55180 (24 bytes)
[  993.227050] audmgr: rpc_reply status 0
[  993.227081] [RPC] READ on ept c2c55180
[  993.240692] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=64 dst=1:c2c55180
[  993.265014] [RPC] READ on ept c2c55180 (60 bytes)
[  993.265075] audmgr: rpc 1000000 0 14
[  993.265106] audmgr: rpc READY handle=0x00000001
[  993.265136] [RPC] REPLY to xid=5d4 @ id=0:00000001 (24 bytes)
[  993.265167] [RPC] READ on ept c2c55180
[  993.298614] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=64 dst=1:c2c55180
[  993.298889] [RPC] READ on ept c2c55180 (60 bytes)
[  993.298950] audmgr: rpc 1000000 1000000 14
[  993.298980] audmgr: rpc CODEC_CONFIG volume=0x00000204
[  993.299072] audpp: enable
[  993.299133] adsp: opening module AUDPPTASK
[  993.299255] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)
[  993.299316] [RPC] READ on ept d28383a0
[  993.301452] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  993.308471] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d28383a0
[  993.308776] [RPC] READ on ept d28383a0 (24 bytes)
[  993.308837] adsp: module AUDPPTASK has been registered
[  993.308929] msm_adsp_enable() 'AUDPPTASK'
[  993.309143] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)
[  993.309234] [RPC] READ on ept d28383a0
[  993.309326] [RPC] REPLY to xid=5d5 @ id=0:00000001 (24 bytes)
[  993.322052] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  993.322143] [RR] o RESUME_TX id=0:00000001
[  993.322204] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=68 dst=1:fadefade
[  993.322387] [RPC] READ on ept d58470a0 (64 bytes)
[  993.322418] adsp: rpc event=0, proc_id=2, module=3, image=1
[  993.323364] [RPC] READ on ept c2c55180
[  993.326080] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d28383a0
[  993.326324] [RPC] READ on ept d28383a0 (24 bytes)
[  993.338012] adsp: module AUDPPTASK: READY
[  993.340789] [RPC] REPLY to xid=5d6 @ id=0:00000001 (24 bytes)
[  993.342315] audpp: ENABLE
[  993.342376] audio_dsp_event: CFG_MSG ENABLE
[  993.348022] [H2W] headset present? 0
[  993.348083] if(!headset_plugged() && !(snd_state & SND_STATE_INCALL) = TRUE
[  993.352325] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  993.358001] [RPC] READ on ept d58470a0
[  993.411804] audpp: DMA missed
[  993.421997] htc_pwrsink: ID 1, Util 100%, Total 138000 uA
[  993.755645] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  993.778411] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  993.785949] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  993.789428] request_suspend_state: wakeup (0->0) at 976020000000 (2011-02-16 16:46:33.516000000 UTC)
[  993.792327] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  993.814758] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[  993.836212] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[  993.886993] snd_ioctl set_device: device 0
[  993.906768] audpp: DMA missed
[  994.188537] +++ msm_setup_audio -- 0x1
[  994.190032] msm_setup_audio - Param is: CE_PLAYBACK_HANDSFREE
[  994.190093] turn_mic_bias_on(0)
[  994.190216] --- msm_setup_audio -- 0x1
[  994.190216] snd_set_device 0 1 1
[  994.190277] [RPC] CALL to 30000002:-1440015804 @ 0:00000001 (60 bytes)
[  994.190307] [RPC] READ on ept d3af6980
[  994.191223] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=28 dst=1:d3af6980
[  994.191345] [RPC] READ on ept d3af6980 (24 bytes)
[  994.193115] [RR] x RESUME_TX id=1:d3af6980
[  994.193176] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:d3af6980 id=-1073487444:c03269ac
[  994.386749] audpp: DMA missed
[  994.426757] audpp: DMA missed
[  994.461761] audpp: DMA missed
[  994.501739] audpp: DMA missed
[  996.582122] --- Audio Out: 0x0 ---
[  996.582153] audio_disable()
[  996.583190] audio_dsp_event: CFG_MSG DISABLE
[  996.583221] audpp: disable
[  996.584259] msm_adsp_disable() 'AUDPPTASK'
[  996.584289] audpp: DISABLE
[  996.584320] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)
[  996.584381] [RPC] READ on ept d28383a0
[  996.586059] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d28383a0
[  996.586151] [RPC] READ on ept d28383a0 (24 bytes)
[  996.586212] adsp: closing module AUDPPTASK
[  996.586212] [RR] x REMOVE_CLIENT id=1:d28383a0
[  996.586242] [RR] send control message cmd=6 srv.cmd=6 prog=00000001:d28383a0 id=-1071180264:c005cc18
[  996.586303] adsp: disable interrupt
[  996.586334] [RPC] CALL to 30000013:0 @ 0:00000001 (44 bytes)
[  996.587219] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[  996.587249] [RR] o RESUME_TX id=0:00000001
[  996.588073] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c2c55180
[  996.588165] [RPC] READ on ept c2c55180 (24 bytes)
[  996.588195] audmgr: rpc_reply status 0
[  996.588195] [RPC] READ on ept c2c55180
[  996.618835] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=64 dst=1:c2c55180
[  996.618927] [RPC] READ on ept c2c55180 (60 bytes)
[  996.618957] audmgr: rpc 1000000 6000000 14
[  996.618988] audmgr: DISABLED
[  996.619018] [RPC] REPLY to xid=5d7 @ id=0:00000001 (24 bytes)
[  996.619079] [RPC] READ on ept c2c55180
[  996.619110] ------------------------------
[  996.619140]  if( !(snd_state & SND_STATE_INCALL ) ) = TRUE
[  996.619201] htc_pwrsink: ID 1, Util 0%, Total 38000 uA
[  996.619293] [RR] x RESUME_TX id=1:c2c55180
[  996.619323] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:c2c55180 id=-1073487444:c03269ac
[ 1019.047058] snd_ioctl set_device: device 0
[ 1019.050903] ++ IN CALL: 0x6 ++
[ 1019.336700] +++ msm_setup_audio -- 0x6
[ 1019.338775] msm_setup_audio - Param is: PHONE_EARCUPLE_VOL1
[ 1019.338836] turn_mic_bias_on(1)
[ 1019.338928] --- msm_setup_audio -- 0x6
[ 1019.338958] snd_set_device 0 0 0
[ 1019.338989] [RPC] CALL to 30000002:-1440015804 @ 0:00000001 (60 bytes)
[ 1019.339050] [RPC] READ on ept d3af6980
[ 1019.339904] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d3af6980
[ 1019.340026] [RPC] READ on ept d3af6980 (24 bytes)
[ 1019.406829] request_suspend_state: wakeup (0->0) at 1001240000000 (2011-02-16 16:46:58.736000000 UTC)
[ 1037.626983] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[ 1037.677368] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[ 1037.890594] -- END CALL : 0x0--
[ 1037.890655] END CALL triggered without being in a call!
[ 1037.890655] This really shouldn't happen
[ 1037.939880] -- END CALL : 0x0--
[ 1037.939910] END CALL triggered without being in a call!
[ 1037.939941] This really shouldn't happen
[ 1038.104827] audio_enable()
[ 1038.104888] ++++++++++++++++++++++++++++++
[ 1038.104919] +++ Audio Out: 0x1 +++
[ 1038.104949] [RPC] CALL to 30000013:0 @ 0:00000001 (72 bytes)
[ 1038.107757] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c2c55180
[ 1038.108001] [RPC] READ on ept c2c55180 (24 bytes)
[ 1038.108032] audmgr: rpc_reply status 0
[ 1038.108062] [RPC] READ on ept c2c55180
[ 1038.117797] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=64 dst=1:c2c55180
[ 1038.117950] [RPC] READ on ept c2c55180 (60 bytes)
[ 1038.117980] audmgr: rpc 1000000 0 14
[ 1038.117980] audmgr: rpc READY handle=0x00000001
[ 1038.118041] [RPC] REPLY to xid=5d8 @ id=0:00000001 (24 bytes)
[ 1038.118072] [RPC] READ on ept c2c55180
[ 1038.140289] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=64 dst=1:c2c55180
[ 1038.140441] [RPC] READ on ept c2c55180 (60 bytes)
[ 1038.140472] audmgr: rpc 1000000 1000000 14
[ 1038.140502] audmgr: rpc CODEC_CONFIG volume=0x00000204
[ 1038.140563] audpp: enable
[ 1038.140594] adsp: opening module AUDPPTASK
[ 1038.140686] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)
[ 1038.140747] [RPC] READ on ept d28383a0
[ 1038.140777] [RPC] REPLY to xid=5d9 @ id=0:00000001 (24 bytes)
[ 1038.141723] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[ 1038.141784] [RR] o RESUME_TX id=0:00000001
[ 1038.141876] [RPC] READ on ept c2c55180
[ 1038.142608] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d28383a0
[ 1038.142761] [RPC] READ on ept d28383a0 (24 bytes)
[ 1038.142791] adsp: module AUDPPTASK has been registered
[ 1038.142822] msm_adsp_enable() 'AUDPPTASK'
[ 1038.142852] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)
[ 1038.142913] [RPC] READ on ept d28383a0
[ 1038.143920] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=68 dst=1:fadefade
[ 1038.144042] [RPC] READ on ept d58470a0 (64 bytes)
[ 1038.144073] adsp: rpc event=0, proc_id=2, module=3, image=1
[ 1038.144500] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d28383a0
[ 1038.144622] [RPC] READ on ept d28383a0 (24 bytes)
[ 1038.144714] adsp: module AUDPPTASK: READY
[ 1038.144775] [RPC] REPLY to xid=5da @ id=0:00000001 (24 bytes)
[ 1038.145874] [H2W] headset present? 0
[ 1038.145904] if(!headset_plugged() && !(snd_state & SND_STATE_INCALL) = TRUE
[ 1038.145965] audpp: ENABLE
[ 1038.145996] audio_dsp_event: CFG_MSG ENABLE
[ 1038.149047] adsp: waiting for DSP write ready
[ 1038.153259] [RPC] READ on ept d58470a0
[ 1038.170104] htc_pwrsink: ID 1, Util 100%, Total 138000 uA
[ 1038.564453] snd_ioctl set_device: device 0
[ 1038.580413] audpp: DMA missed
[ 1038.893402] +++ msm_setup_audio -- 0x1
[ 1038.894287] msm_setup_audio - Param is: CE_PLAYBACK_HANDSFREE
[ 1038.894378] turn_mic_bias_on(0)
[ 1038.894531] --- msm_setup_audio -- 0x1
[ 1038.894561] snd_set_device 0 1 1
[ 1038.894592] [RPC] CALL to 30000002:-1440015804 @ 0:00000001 (60 bytes)
[ 1038.894683] [RPC] READ on ept d3af6980
[ 1038.897308] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d3af6980
[ 1038.897460] [RPC] READ on ept d3af6980 (24 bytes)
[ 1039.340393] audpp: DMA missed
[ 1039.415405] audpp: DMA missed
[ 1040.294433] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[ 1040.344787] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[ 1040.550354] audpp: DMA missed
[ 1041.021789] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1041.052368] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1041.071960] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1041.097717] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1041.122924] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1041.153778] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1041.187622] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1041.194122] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1041.213928] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1041.233215] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1041.253967] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1041.275665] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1041.295043] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1041.315521] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1041.335693] --- Audio Out: 0x0 ---
[ 1041.335754] audio_disable()
[ 1041.336791] audio_dsp_event: CFG_MSG DISABLE
[ 1041.336822] audpp: disable
[ 1041.337829] msm_adsp_disable() 'AUDPPTASK'
[ 1041.337860] audpp: DISABLE
[ 1041.337921] [RPC] CALL to 3000000a:0 @ 0:00000001 (56 bytes)
[ 1041.337951] [RPC] READ on ept d28383a0
[ 1041.338256] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe
[ 1041.338470] [RR] o RESUME_TX id=0:00000001
[ 1041.338867] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1041.339019] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:d28383a0
[ 1041.339172] [RPC] READ on ept d28383a0 (24 bytes)
[ 1041.339233] adsp: closing module AUDPPTASK
[ 1041.339263] [RR] x REMOVE_CLIENT id=1:d28383a0
[ 1041.339294] [RR] send control message cmd=6 srv.cmd=6 prog=00000001:d28383a0 id=-1071180264:c005cc18
[ 1041.339355] adsp: disable interrupt
[ 1041.339385] [RPC] CALL to 30000013:0 @ 0:00000001 (44 bytes)
[ 1041.340972] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=28 dst=1:c2c55180
[ 1041.341094] [RPC] READ on ept c2c55180 (24 bytes)
[ 1041.341125] audmgr: rpc_reply status 0
[ 1041.341125] [RPC] READ on ept c2c55180
[ 1041.356781] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1041.371459] [RR] - ver=1 type=1 src=0:00000001 crx=1 siz=64 dst=1:c2c55180
[ 1041.371551] [RR] x RESUME_TX id=1:c2c55180
[ 1041.371551] [RR] send control message cmd=7 srv.cmd=7 prog=00000001:c2c55180 id=-1073487444:c03269ac
[ 1041.371673] [RPC] READ on ept c2c55180 (60 bytes)
[ 1041.371734] audmgr: rpc 1000000 6000000 14
[ 1041.371734] audmgr: DISABLED
[ 1041.371795] ------------------------------
[ 1041.371826]  if( !(snd_state & SND_STATE_INCALL ) ) = TRUE
[ 1041.371887] htc_pwrsink: ID 1, Util 0%, Total 38000 uA
[ 1041.371978] [RPC] REPLY to xid=5db @ id=0:00000001 (24 bytes)
[ 1041.372039] [RPC] READ on ept c2c55180
[ 1041.377624] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1041.397888] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1041.785552] gpiomatrix: unmapped key, 0-3 (35-18) changed to 1
[ 1043.856719] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1043.873962] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1043.894348] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1043.914764] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1043.915924] msm_i2c msm_i2c.0: error, status c8
[ 1043.916015] msm_i2c msm_i2c.0: Error during data xfer (-5)
[ 1043.934539] micropklt, i2c write retry
[ 1043.936187] request_suspend_state: sleep (0->3) at 1025310000000 (2011-02-16 16:47:22.806000000 UTC)
[ 1043.936340] Sending arm9_low_speed 2
[ 1043.967834] novtec_blank
[ 1043.967895] novtec_suspend
[ 1044.088928] htcrhod_mddi_power_client (off)
[ 1044.089202] mddi_suspended
[ 1044.089263] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[ 1046.579986] active wake lock PowerManagerService
[ 1046.580078] active wake lock evdev, time left 260
[ 1046.580108] active wake lock evdev, time left 260
[ 1049.072052] request_suspend_state: wakeup (3->0) at 1030360000000 (2011-02-16 16:47:27.856000000 UTC)
[ 1049.072235] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[ 1049.072265] novtec_resume
[ 1049.072357] htcrhod_mddi_power_client (on)
[ 1049.080688] mddi_resumed
[ 1049.090362] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1049.091033] msm_i2c msm_i2c.0: error, status 63c8
[ 1049.091094] msm_i2c msm_i2c.0: Error during data xfer (-5)
[ 1049.106201] micropklt, i2c write retry
[ 1049.339416] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1049.369049] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1049.413421] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1049.422821] hw3d_late_resume: resuming
[ 1049.422851] tssc_manager_resume(): ts->use_irq=1
[ 1049.422912] Sending arm9_low_speed 7
[ 1049.432891] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1049.449310] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1049.469085] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1049.489318] novtec_unblank
[ 1049.490386] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1049.510467] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1049.537475] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1049.549743] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1049.590209] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1049.612426] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1049.631103] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1049.651275] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1050.897674] pmem: Unmap region does not map any mapped region!<6>microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1052.040161] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1052.060577] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1052.081024] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1052.101623] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1052.122039] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1052.142333] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1052.162719] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1052.183288] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1052.203704] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1052.224182] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1052.244537] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1052.265075] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1052.285339] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1052.305786] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1052.306915] msm_i2c msm_i2c.0: error, status c8
[ 1052.307006] msm_i2c msm_i2c.0: Error during data xfer (-5)
[ 1052.325622] micropklt, i2c write retry
[ 1052.328277] request_suspend_state: sleep (0->3) at 1033570000000 (2011-02-16 16:47:31.066000000 UTC)
[ 1052.328430] Sending arm9_low_speed 2
[ 1052.359436] novtec_blank
[ 1052.359497] novtec_suspend
[ 1052.475555] htcrhod_mddi_power_client (off)
[ 1052.475830] mddi_suspended
[ 1052.475891] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[ 1052.735809] active wake lock PowerManagerService
[ 1052.735870] active wake lock evdev, time left 482
[ 1052.735900] active wake lock evdev, time left 482
[ 1052.735931] active wake lock SMD_DS, time left 37
[ 1055.390502] request_suspend_state: wakeup (3->0) at 1036580000000 (2011-02-16 16:47:34.076000000 UTC)
[ 1055.390686] htc_pwrsink: ID 0, Util 38%, Total 38000 uA
[ 1055.390747] novtec_resume
[ 1055.390838] htcrhod_mddi_power_client (on)
[ 1055.396179] mddi_resumed
[ 1055.462951] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1055.660400] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1055.697540] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1055.732727] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1055.750701] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1055.750793] hw3d_late_resume: resuming
[ 1055.750823] tssc_manager_resume(): ts->use_irq=1
[ 1055.750885] Sending arm9_low_speed 7
[ 1055.770721] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1055.791198] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1055.814361] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1055.832336] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1055.852844] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1055.873016] novtec_unblank
[ 1055.873626] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1055.894042] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1055.914642] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1055.935302] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1055.956146] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1057.120117] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1057.139587] microp-klt: Setting lcd-backlight brightness2 to: 3/10
[ 1057.160003] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1057.180419] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1057.200988] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1057.221374] microp-klt: Setting lcd-backlight brightness2 to: 2/10
[ 1057.241851] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1057.262115] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1057.282531] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1057.302947] microp-klt: Setting lcd-backlight brightness2 to: 1/10
[ 1057.323364] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1057.344024] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1057.364227] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1057.384613] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1057.405059] microp-klt: Setting lcd-backlight brightness2 to: 0/10
[ 1057.406188] msm_i2c msm_i2c.0: error, status c8
[ 1057.406280] msm_i2c msm_i2c.0: Error during data xfer (-5)
[ 1057.424835] micropklt, i2c write retry
[ 1057.426361] request_suspend_state: sleep (0->3) at 1038580000000 (2011-02-16 16:47:36.076000000 UTC)
[ 1057.426513] Sending arm9_low_speed 2
[ 1057.457519] novtec_blank
[ 1057.457611] novtec_suspend
[ 1057.553070] htcrhod_mddi_power_client (off)
[ 1057.553344] mddi_suspended
[ 1057.553405] htc_pwrsink: ID 0, Util 7%, Total 7000 uA
[ 1057.844787] active wake lock PowerManagerService
[ 1057.844848] active wake lock evdev, time left 478
[ 1057.844848] active wake lock evdev, time left 478
[ 1057.844879] active wake lock SMD_DS, time left 30
[ 1249.725158] pmem: requested data from file descriptor that doesn't exist.<6>get_msm_hw3d_file: requested data from file descriptor that doesn't exist.<3>mdp_ppp: could not retrieve src image from memory
[ 1413.778381] [RR] - ver=1 type=1 src=0:00000001 crx=0 siz=484 dst=1:d3af6140
[ 1413.778808] [RPC] READ on ept d3af6140
[ 1413.778900] [RPC] READ on ept d3af6140 (480 bytes)
[ 1413.782806] [RPC] REPLY to xid=5dc @ id=0:00000001 (28 bytes)
[ 2004.131866] -- END CALL : 0x0--
[ 2004.131927] END CALL triggered without being in a call!
[ 2004.131958] This really shouldn't happen
[ 2007.281646] smd_close(7)
[ 2007.282745] init: untracked pid 1656 exited