Guest User

Alcatel One Touch Evo 7

a guest
Jan 6th, 2014
348
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. <6>[ 0.000000] Initializing cgroup subsys cpu
  2. <5>[ 0.000000] Linux version 3.0.8+ (liul@ctrc-desktop) (gcc version 4.4.0 (GCC) ) #287 PREEMPT Fri Jan 4 17:22:59 CST 2013
  3. <4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  4. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. <4>[ 0.000000] Machine: RK29board
  6. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  7. <4>[ 0.000000] Boot mode: 6
  8. <6>[ 0.000000] bootconsole [earlycon0] enabled
  9. <4>[ 0.000000] CPU SRAM: copied sram code from c0b83000 to fef00000 - fef023d0
  10. <4>[ 0.000000] CPU SRAM: copied sram data from c0b853d0 to fef03000 - fef03204
  11. <4>[ 0.000000] clock: pll_wait_lock: wait pll bit 0x4000000 time out!
  12. <4>[ 0.000000] clock: pll_wait_lock: wait pll bit 0x4000000 time out!
  13. <6>[ 0.000000] Clocking rate (apll/dpll/cpll/gpll/core/aclk_cpu/hclk_cpu/pclk_cpu/aclk_periph/hclk_periph/pclk_periph): 300/330/297/288/300/150/75/37/144/144/36 MHz (20110909)
  14. <4>[ 0.000000] DDR DEBUG: version 2.02 20111109
  15. <4>[ 0.000000] DDR DEBUG: DDR3 Device
  16. <4>[ 0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB
  17. <4>[ 0.000000] DDR DEBUG: init success!!! freq=396MHz
  18. <4>[ 0.000000] DDR DEBUG: CSR:0x0, RSLR0:0x249, RSLR1:0x0, RDGR0:0x55, RDGR1:0xff
  19. <7>[ 0.000000] On node 0 totalpages: 210688
  20. <7>[ 0.000000] free_area_init_node: node 0, pgdat c0b81900, node_mem_map c1609000
  21. <7>[ 0.000000] DMA zone: 622 pages used for memmap
  22. <7>[ 0.000000] DMA zone: 0 pages reserved
  23. <7>[ 0.000000] DMA zone: 78994 pages, LIFO batch:15
  24. <7>[ 0.000000] HighMem zone: 1426 pages used for memmap
  25. <7>[ 0.000000] HighMem zone: 129646 pages, LIFO batch:31
  26. <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  27. <7>[ 0.000000] pcpu-alloc: [0] 0
  28. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 208640
  29. <5>[ 0.000000] Kernel command line: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x110000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x00100000@0x00018000(backup),0x0003a000@0x00118000(cache),0x00200000@0x00152000(userdata),0x00002000@0x00352000(kpanic),0x00100000@0x00354000(system),-@0x00454000(user),0x2000@0x0(factory) bootver=2012-11-12#2.31 firmware_ver=1.6.1
  30. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  31. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  32. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  33. <6>[ 0.000000] Memory: 311MB 512MB = 823MB total
  34. <5>[ 0.000000] Memory: 816148k/816148k available, 26604k reserved, 524288K highmem
  35. <5>[ 0.000000] Virtual kernel memory layout:
  36. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  37. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  38. <5>[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
  39. <5>[ 0.000000] vmalloc : 0xd3800000 - 0xfe800000 ( 688 MB)
  40. <5>[ 0.000000] lowmem : 0xc0000000 - 0xd3700000 ( 311 MB)
  41. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  42. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  43. <5>[ 0.000000] .init : 0xc0408000 - 0xc0580000 (1504 kB)
  44. <5>[ 0.000000] .text : 0xc0580000 - 0xc0b351e4 (5845 kB)
  45. <5>[ 0.000000] .data : 0xc0b36000 - 0xc0b825c0 ( 306 kB)
  46. <5>[ 0.000000] .bss : 0xc0b86024 - 0xc1608210 (10761 kB)
  47. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  48. <6>[ 0.000000] NR_IRQS:388
  49. <4>[ 0.000000] rk29_gpio_init: 224 gpio irqs in 7 banks
  50. <6>[ 0.000000] sched_clock: 32 bits at 36MHz, resolution 27ns, wraps every 119304ms
  51. <6>[ 0.000000] Console: colour dummy device 80x30
  52. <6>[ 0.005475] Calibrating delay loop (skipped) preset value.. 299.83 BogoMIPS (lpj=1499184)
  53. <6>[ 0.014610] pid_max: default: 32768 minimum: 301
  54. <6>[ 0.020105] Mount-cache hash table entries: 512
  55. <6>[ 0.025844] Initializing cgroup subsys debug
  56. <6>[ 0.030650] Initializing cgroup subsys cpuacct
  57. <6>[ 0.035706] Initializing cgroup subsys freezer
  58. <6>[ 0.040742] CPU: Testing write buffer coherency: ok
  59. <6>[ 0.047294] devtmpfs: initialized
  60. <6>[ 0.060745] print_constraints: dummy:
  61. <6>[ 0.065356] NET: Registered protocol family 16
  62. <4>[ 0.070431] last_log: 0xd3080000 0xc0b87328
  63. <6>[ 0.085040] TCL_KERNEL_VERSION:0.9v!!!!!!!!!!!!!!!!
  64. <6>[ 0.126582] bio: create slab <bio-0> at 0
  65. <5>[ 0.132517] SCSI subsystem initialized
  66. <6>[ 0.137244] usbcore: registered new interface driver usbfs
  67. <6>[ 0.143638] usbcore: registered new interface driver hub
  68. <6>[ 0.149794] usbcore: registered new device driver usb
  69. <6>[ 0.156404] rk29_i2c rk29_i2c.0: i2c-0: RK29 I2C adapter
  70. <6>[ 0.162655] rk29_i2c rk29_i2c.1: i2c-1: RK29 I2C adapter
  71. <6>[ 0.169149] rk29_i2c rk29_i2c.2: i2c-2: RK29 I2C adapter
  72. <6>[ 0.175390] rk29_i2c rk29_i2c.3: i2c-3: RK29 I2C adapter
  73. <6>[ 0.181624] rk29-adc rk29-adc: rk29 adc: driver initialized
  74. <6>[ 0.191835] Charger: ac supply
  75. <6>[ 0.197639] bq24160 0-006b: device probe ok!
  76. <4>[ 0.202631] rk29_adc_battery_probe--1313:
  77. <4>[ 0.208249] rk29_adc_battery_lowpower_check--1187:
  78. <6>[ 0.530241] rk29_adc_battery: driver initialized
  79. <6>[ 0.535988] Advanced Linux Sound Architecture Driver Version 1.0.24.
  80. <6>[ 0.544049] Bluetooth: Core ver 2.16
  81. <6>[ 0.548180] NET: Registered protocol family 31
  82. <6>[ 0.553202] Bluetooth: HCI device and connection manager initialized
  83. <6>[ 0.560296] Bluetooth: HCI socket layer initialized
  84. <6>[ 0.565778] Bluetooth: L2CAP socket layer initialized
  85. <6>[ 0.571462] Bluetooth: SCO socket layer initialized
  86. <6>[ 0.577403] cfg80211: Calling CRDA to update world regulatory domain
  87. <4>[ 0.585112] rk29_tps65910_config: tps65910 init config.
  88. <6>[ 0.594086] TPS65910 Set default voltage.
  89. <6>[ 0.600869] Switching to clocksource timer3
  90. <6>[ 0.611779] Switched to NOHz mode on CPU #0
  91. <4>[ 0.651068] rk29fb_probe ok
  92. <6>[ 0.654837] image_num=9!!!!!!!
  93. <4>[ 0.806087] RK29 Backlight Driver Initialized.
  94. <6>[ 0.826136] NET: Registered protocol family 2
  95. <6>[ 0.831354] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  96. <6>[ 0.840035] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  97. <6>[ 0.850825] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  98. <6>[ 0.859783] TCP: Hash tables configured (established 65536 bind 65536)
  99. <6>[ 0.867091] TCP reno registered
  100. <6>[ 0.870654] UDP hash table entries: 256 (order: 0, 4096 bytes)
  101. <6>[ 0.877230] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  102. <6>[ 0.884906] NET: Registered protocol family 1
  103. <6>[ 0.890220] Unpacking initramfs...
  104. <6>[ 1.037583] Freeing initrd memory: 1088K
  105. <6>[ 1.043045] print_constraints: VIO: 3300 mV normal
  106. <6>[ 1.049750] print_constraints: VDD1: 950 <--> 1400 mV at 1200 mV normal
  107. <3>[ 1.057613] machine_constraints_voltage: VDD2: unsupportable voltage constraints
  108. <3>[ 1.066031] tps65910_regulator tps65910_regulator.2: can't register VDD2, -22
  109. <4>[ 1.073991] tps65910_regulator: probe of tps65910_regulator.2 failed with error -22
  110. <6>[ 1.082762] print_constraints: VDIG1: 2700 mV normal
  111. <6>[ 1.089310] print_constraints: VDIG2: 1200 mV normal
  112. <6>[ 1.095283] print_constraints: VAUX33: 3300 mV normal
  113. <6>[ 1.101398] print_constraints: VMMC: 3000 mV normal
  114. <6>[ 1.107324] print_constraints: VAUX1: 2800 mV normal
  115. <6>[ 1.113318] print_constraints: VAUX2: 2900 mV normal
  116. <6>[ 1.119349] print_constraints: VDAC: 1800 mV normal
  117. <6>[ 1.125779] print_constraints: VPLL: 2500 mV normal
  118. <6>[ 1.131599] PMU: registered new PMU device of type 0
  119. <6>[ 1.137599] verifyid: initialized
  120. <6>[ 1.141701] Loaded driver for PL330 DMAC-0 rk29-pl330
  121. <6>[ 1.147429] DBUFF-32x8bytes Num_Chans-6 Num_Peri-8 Num_Events-3
  122. <6>[ 1.154374] Loaded driver for PL330 DMAC-1 rk29-pl330
  123. <6>[ 1.160088] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-4
  124. <4>[ 1.171895] vpu_mem: 61 initialized
  125. <4>[ 1.175999] vpu: power on
  126. <6>[ 1.199523] VPU_SERVICE: HW ID = 0x67311148
  127. <6>[ 1.204209] VPU_SERVICE: Compatible HW found at 0x10104200
  128. <6>[ 1.210389] VPU_SERVICE: HW ID = 0x82701110
  129. <6>[ 1.215087] VPU_SERVICE: Compatible HW found at 0x10104000
  130. <4>[ 1.222261] vpu: power off...done
  131. <6>[ 1.247723] VPU_SERVICE: init success
  132. <4>[ 1.270147] highmem bounce pool size: 64 pages
  133. <6>[ 1.275357] ashmem: initialized
  134. <6>[ 1.279431] fuse init (API version 7.16)
  135. <6>[ 1.284755] io scheduler noop registered
  136. <6>[ 1.289235] io scheduler cfq registered (default)
  137. <6>[ 1.294814] rk29_serial.1: ttyS1 at MMIO 0x20060000 (irq = 67) is a rk29_serial.1
  138. <4>[ 1.303187] serial.1 clock:24000000
  139. <4>[ 1.307114] serial.1 baud:115200
  140. <4>[ 1.310744] serial.1 quot:13
  141. <6>[ 1.314007] console [ttyS1] enabled, bootconsole disabled
  142. <6>[ 1.335640] rk29_serial rk29_serial.1: membase 0xd3816000
  143. <6>[ 1.341063] rk29_serial.0: ttyS0 at MMIO 0x20030000 (irq = 66) is a rk29_serial.0
  144. <6>[ 1.365637] rk29_serial rk29_serial.0: membase 0xd381e000
  145. <6>[ 1.371198] rk29_serial rk29_serial.2: dma_rx_buffer 0xffde0000
  146. <6>[ 1.377508] rk29_serial rk29_serial.2: up 0xc0b5e370
  147. <6>[ 1.382506] rk29_serial rk29_serial.2: serial_rk_init_dma_rx sucess
  148. <6>[ 1.388819] rk29_serial.2: ttyS2 at MMIO 0x20064000 (irq = 68) is a rk29_serial.2
  149. <6>[ 1.415638] rk29_serial rk29_serial.2: membase 0xd3826000
  150. <6>[ 1.421316] Rockchip ion module(version: 1.0) is successfully loaded
  151. <6>[ 1.429695] loop: module loaded
  152. <6>[ 1.432874] pmem_cam: 1 init
  153. <6>[ 1.436601] pmem: 1 init
  154. <6>[ 1.440126] Android kernel panic handler initialized (bind=kpanic)
  155. <4>[ 1.446322] drivers/misc/rk29_modem/modem_tct_m70.c[159]: m70_init
  156. <4>[ 1.452527] drivers/misc/rk29_modem/rk29_modem.c[390]: rk29_modem_init
  157. <4>[ 1.459138] drivers/misc/rk29_modem/rk29_modem.c[263]: rk29_modem_dev_init
  158. <4>[ 1.885653] drivers/misc/rk29_modem/rk29_modem.c[224]: install_irq
  159. <4>[ 1.891843] install_irq: 100 ==> 100
  160. <6>[ 1.896404] PPP generic driver version 2.4.2
  161. <6>[ 1.900935] PPP Deflate Compression module registered
  162. <6>[ 1.906041] PPP BSD Compression module registered
  163. <6>[ 1.911760] PPP MPPE Compression module registered
  164. <6>[ 1.917000] NET: Registered protocol family 24
  165. <6>[ 1.921446] tun: Universal TUN/TAP device driver, 1.6
  166. <6>[ 1.926533] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  167. <6>[ 1.932925] usbcore: registered new interface driver asix
  168. <6>[ 1.938470] usbcore: registered new interface driver cdc_ether
  169. <6>[ 1.944469] usbcore: registered new interface driver dm9620
  170. <6>[ 1.950531] usbcore: registered new interface driver SR9700_android
  171. <6>[ 1.956844] usbcore: registered new interface driver net1080
  172. <6>[ 1.962537] usbcore: registered new interface driver cdc_subset
  173. <6>[ 1.968501] usbcore: registered new interface driver zaurus
  174. <6>[ 1.974082] cdc_ncm: 04-Aug-2011
  175. <4>[ 1.977322] drivers/misc/rk29_modem/rk29_modem.c[197]: irq_bbwakeupap_handler
  176. <4>[ 1.984456] drivers/misc/rk29_modem/modem_tct_m70.c[138]: m70_irq_handler
  177. <4>[ 1.991261] bp_wakeup_ap_work
  178. <6>[ 1.994274] usbcore: registered new interface driver cdc_ncm
  179. <4>[ 1.999948] Rockchip WiFi SYS interface (V1.00) ...
  180. <6>[ 2.004941] Initializing USB Mass Storage driver...
  181. <6>[ 2.009879] usbcore: registered new interface driver usb-storage
  182. <6>[ 2.015892] USB Mass Storage support registered.
  183. <6>[ 2.020620] usbcore: registered new interface driver usbserial
  184. <6>[ 2.026498] USB Serial support registered for generic
  185. <6>[ 2.031583] usbcore: registered new interface driver usbserial_generic
  186. <6>[ 2.038204] usbserial: USB Serial Driver core
  187. <6>[ 2.042596] USB Serial support registered for GSM modem (1-port)
  188. <6>[ 2.048661] usbcore: registered new interface driver option
  189. <6>[ 2.054228] option: v0.7.2:USB Driver for GSM modems
  190. <6>[ 2.059306] DWC_OTG: dwc_otg_driver_probe otg2.0 reg addr: 0x10180000 remap:0xd3880000
  191. <6>[ 2.277569] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
  192. <6>[ 2.282456] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xd3900000
  193. <6>[ 2.500690] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  194. <6>[ 2.505325] usb20_host usb20_host: DWC OTG Controller
  195. <6>[ 2.510402] usb20_host usb20_host: new USB bus registered, assigned bus number 1
  196. <6>[ 2.517829] usb20_host usb20_host: irq 49, io mem 0x00000000
  197. <6>[ 2.523498] DWC_OTG: Init: Port Power? op_state=1
  198. <6>[ 2.528195] DWC_OTG: Init: Power Port (0)
  199. <6>[ 2.532275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  200. <6>[ 2.539073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  201. <6>[ 2.546301] usb usb1: Product: DWC OTG Controller
  202. <6>[ 2.551001] usb usb1: Manufacturer: Linux 3.0.8+ host20_hcd
  203. <6>[ 2.556580] usb usb1: SerialNumber: usb20_host
  204. <6>[ 2.561381] hub 1-0:1.0: USB hub found
  205. <6>[ 2.565137] hub 1-0:1.0: 1 port detected
  206. <6>[ 2.570305] android_usb gadget: Mass Storage Function, version: 2009/09/11
  207. <6>[ 2.577209] android_usb gadget: Number of LUNs=2
  208. <6>[ 2.581824] lun0: LUN: removable file: (no medium)
  209. <6>[ 2.586708] lun1: LUN: removable file: (no medium)
  210. <6>[ 2.591728] android_usb gadget: android_usb ready
  211. <6>[ 2.596681] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
  212. <6>[ 2.603959] usbcore: registered new interface driver xpad
  213. <6>[ 2.609421] usbcore: registered new interface driver usb_acecad
  214. <6>[ 2.615333] acecad: v3.2:USB Acecad Flair tablet driver
  215. <6>[ 2.620604] usbcore: registered new interface driver aiptek
  216. <6>[ 2.626184] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
  217. <6>[ 2.634091] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
  218. <6>[ 2.641525] usbcore: registered new interface driver gtco
  219. <4>[ 2.646930] GTCO usb driver version: 2.00.0006
  220. <6>[ 2.651232] usbcore: registered new interface driver hanwang
  221. <6>[ 2.657121] usbcore: registered new interface driver kbtab
  222. <6>[ 2.662602] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
  223. <6>[ 2.668448] usbcore: registered new interface driver wacom
  224. <6>[ 2.673928] wacom: v1.52:USB Wacom tablet driver
  225. <4>[ 2.678601] [LAIBAO] file(drivers/input/touchscreen/ft5x0x_i2c_ts.c), function (fts_ts_probe), --probe start
  226. <4>[ 2.688635] ft5406_init_platform_hw
  227. <6>[ 2.692519] Bosch Sensortec Device detected!
  228. <6>[ 2.692524] BMA222 registered I2C driver!
  229. <6>[ 2.710384] input: bma222 as /devices/virtual/input/input1
  230. <4>[ 2.716122] i2c-core: driver [bma222] using legacy suspend method
  231. <4>[ 2.722212] i2c-core: driver [bma222] using legacy resume method
  232. <6>[ 2.735438] using rtc device, tps65910_rtc, for alarms
  233. <6>[ 2.740456] tps65910_rtc tps65910_rtc: rtc core: registered tps65910_rtc as rtc0
  234. <6>[ 2.748057] TPS65910 RTC device successfully registered
  235. <6>[ 2.757537] lirc_dev: IR Remote Control driver registered, major 252
  236. <6>[ 2.763975] IR NEC protocol handler initialized
  237. <6>[ 2.768532] IR RC5(x) protocol handler initialized
  238. <6>[ 2.773320] IR RC6 protocol handler initialized
  239. <6>[ 2.777860] IR JVC protocol handler initialized
  240. <6>[ 2.782390] IR Sony protocol handler initialized
  241. <6>[ 2.787057] IR RC5 (streamzap) protocol handler initialized
  242. <6>[ 2.792642] IR LIRC bridge handler initialized
  243. <6>[ 2.797109] Linux video capture interface: v2.00
  244. <6>[ 2.802543] device-mapper: uevent: version 1.0.3
  245. <6>[ 2.807319] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  246. <4>[ 2.876183] rk29_sdmmc_change_clk_div..1714.. newDiv=80, newCLK=300Khz====xbw[sd_mmc]=====
  247. <4>[ 2.889761] .Line3496..The End of SDMMC-probe Ver.2.16 The last modify date is 2012-06-01,modifyed by XBW. ===xbw[sd_mmc]===
  248. <4>[ 2.889771]
  249. <4>[ 2.902491]
  250. <4>[ 2.902494] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....======xbw[mmc0]=====
  251. <4>[ 2.917637] .Line3496..The End of SDMMC-probe Ver.2.16 The last modify date is 2012-06-01,modifyed by XBW. ===xbw[sdio]===
  252. <4>[ 2.917646]
  253. <6>[ 2.931903] usbcore: registered new interface driver usbhid
  254. <6>[ 2.937494] usbhid: USB HID core driver
  255. <6>[ 2.941622] logger: created 256K log 'log_main'
  256. <6>[ 2.946262] logger: created 256K log 'log_events'
  257. <6>[ 2.951026] logger: created 256K log 'log_radio'
  258. <6>[ 2.955723] logger: created 256K log 'log_system'
  259. <4>[ 2.960523] ---- gpu regbase: 0xd3850000 ----
  260. <4>[ 2.975990]
  261. <4>[ 2.975994] mmc_attach_sd..1216.. ===== Begin to identify card as SD-card ===xbw[mmc0]===
  262. <4>[ 3.011430] -----> dma_alloc_writecombine 1 pages!
  263. <4>[ 3.016246] -----> dma_alloc_writecombine 1 pages!
  264. <4>[ 3.021065] -----> dma_alloc_writecombine 128 pages!
  265. <4>[ 3.026946] -----> dma_alloc_writecombine 1 pages!
  266. <4>[ 3.044237] rk29_sdmmc_change_clk_div..1714.. newDiv=1, newCLK=24000Khz====xbw[sd_mmc]=====
  267. <6>[ 3.052833] mmc0: new SDHC card at address 0001
  268. <6>[ 3.057721] mmcblk0: mmc0:0001 00000 3.67 GiB
  269. <4>[ 3.064153]
  270. <4>[ 3.064157] msdos_partition..461... ==== Begin to parse sdcard-partition. ====xbw[mmc0]===
  271. <4>[ 3.074021] msdos_partition..530... ==== The sdcard has MBR. ====xbw[mmc0]===
  272. <4>[ 3.081665] msdos_partition..543... ==== partition-1, size=3848192KB ====xbw[mmc0]===
  273. <4>[ 3.089619] msdos_partition..571... ==== main partition-1....====xbw[mmc0]===
  274. <6>[ 3.096812] mmcblk0: p1
  275. <4>[ 3.100970] mmc_rescan_try_freq..1717.. ===== Initialize SD-card successfully. ===xbw[mmc0]===
  276. <4>[ 3.109701]
  277. <4>[ 3.109704] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....======xbw[mmc1]=====
  278. <4>[ 3.119721]
  279. <4>[ 3.119724] =================
  280. <4>[ 3.119727] mmc_rescan..1830.. ====find no SDMMC host.====xbw[mmc1]=====
  281. <3>[ 3.246885] WM8988 0-001a: Failed to add route Left DAC->Left Mixer
  282. <4>[ 3.253538] [LAIBAO] firmware version = 0x14
  283. <6>[ 3.259699] asoc: WM8988 HiFi <-> rk29_i2s.0 mapping ok
  284. <4>[ 3.266161] [LAIBAO] firmware report rate = 60Hz
  285. <6>[ 3.270853] ALSA device list:
  286. <6>[ 3.273820] #0: RK29_WM8988
  287. <6>[ 3.276923] GACT probability NOT on
  288. <6>[ 3.280434] Mirror/redirect action on
  289. <4>[ 3.284175] [LAIBAO] firmware threshold = 88
  290. <6>[ 3.288497] u32 classifier
  291. <6>[ 3.291227] Actions configured
  292. <6>[ 3.294643] Netfilter messages via NETLINK v0.30.
  293. <6>[ 3.299543] nf_conntrack version 0.5.0 (12769 buckets, 51076 max)
  294. <4>[ 3.306421] [LAIBAO] nosie mode = 0x9a
  295. <4>[ 3.310166] [LAIBAO]=========================_sui_irq_num = 102 ================
  296. <6>[ 3.317836] ctnetlink v0.93: registering with nfnetlink.
  297. <6>[ 3.323196] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  298. <4>[ 3.330170] [LAIBAO]=========================client->dev.driver->name = ft5x0x_ts ================
  299. <6>[ 3.339220] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  300. <6>[ 3.345264] xt_time: kernel timezone is -0000
  301. <6>[ 3.349810] input: ft5x0x_ts as /devices/virtual/input/input2
  302. <6>[ 3.355829] ip_tables: (C) 2000-2006 Netfilter Core Team
  303. <6>[ 3.361292] arp_tables: (C) 2002 David S. Miller
  304. <4>[ 3.365994] =========[LAIBAO] file(drivers/input/touchscreen/ft5x0x_i2c_ts.c), function (fts_ts_probe), -- end
  305. <6>[ 3.376057] TCP cubic registered
  306. <6>[ 3.379385] NET: Registered protocol family 10
  307. <6>[ 3.384387] Mobile IPv6
  308. <6>[ 3.386939] ip6_tables: (C) 2000-2006 Netfilter Core Team
  309. <6>[ 3.392477] IPv6 over IPv4 tunneling driver
  310. <6>[ 3.397409] NET: Registered protocol family 17
  311. <6>[ 3.401870] NET: Registered protocol family 15
  312. <5>[ 3.406379] Bridge firewalling registered
  313. <6>[ 3.410500] Bluetooth: RFCOMM TTY layer initialized
  314. <6>[ 3.415381] Bluetooth: RFCOMM socket layer initialized
  315. <6>[ 3.420575] Bluetooth: RFCOMM ver 1.11
  316. <6>[ 3.424321] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  317. <6>[ 3.430374] NET: Registered protocol family 35
  318. <3>[ 3.434953] RK29 Camera driver version: v0.1.10
  319. <4>[ 3.439573] rk29_sensor_io_init..ov5642_back..powerdown pin(307) init failed
  320. <4>[ 3.446629] rk29_sensor_io_deinit..ov5642_back enter..
  321. <6>[ 3.451961] Enable regulator vaux1
  322. <3>[ 3.455364] regulator_check_voltage: VAUX1: operation not allowed
  323. <3>[ 3.479444] chip id:0xa0
  324. <6>[ 3.585706] Disable regulator vaux1
  325. <6>[ 3.589217] camera 33-0-gc0309_front: Probe gc0309_front success
  326. <4>[ 3.595546] ipp irq 46
  327. <6>[ 3.598257] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  328. <6>[ 3.606359] ThumbEE CPU extension supported.
  329. <6>[ 3.611262] input: rk_headsetdet as /devices/platform/rk_headsetdet/input/input3
  330. <6>[ 3.618887] Headset type value: AD(664), VOLTAGE(3242)
  331. <6>[ 3.626100] Use local mic
  332. <6>[ 3.633372] tps65910_rtc tps65910_rtc: setting system clock to 2014-01-06 15:43:07 UTC (1389022987)
  333. <4>[ 3.642691] serial.1 clock:24000000
  334. <4>[ 3.646206] serial.1 baud:115200
  335. <4>[ 3.649432] serial.1 quot:13
  336. <6>[ 3.652628] Freeing init memory: 1504K
  337. <4>[ 3.659872] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  338. <3>[ 3.670748] init: invalid line ueventd.rc line for '//zhaoyi'
  339. <6>[ 3.720663] keychord: using input dev rk29-keypad for fevent
  340. <4>[ 3.726528] serial.1 clock:24000000
  341. <4>[ 3.730013] serial.1 baud:115200
  342. <4>[ 3.733228] serial.1 quot:13
  343. <4>[ 3.788270] rk29xxnand_ko: module license '' taints kernel.
  344. <4>[ 3.793880] Disabling lock debugging due to kernel taint
  345. <4>[ 3.807956] gp_rknand_info = : 0xd335e440
  346. <4>[ 3.812210] FlashCopyProgBuf1=0xc14ac000
  347. <4>[ 3.816209] ATime: 40 ns AHB: 144 timming: 1081
  348. <4>[ 3.820744] No.1 FLASH INFO:2c 68 4 4a a9
  349. <4>[ 3.825098] ATime: 32 ns AHB: 144 timming: 1061
  350. <4>[ 3.829799] ATime: 32 ns AHB: 144 timming: 1061
  351. <4>[ 3.834326] randomizer = 1 , EccBits = 18
  352. <4>[ 3.881676] FTL INFO:Version = 436,Date = 20120518
  353. <4>[ 3.886475] totalLogicBlkRaw = 1904
  354. <4>[ 3.890274] exit newpart, retptr=, *num_parts=11
  355. <4>[ 3.894890] exit newpart, retptr=, *num_parts=11
  356. <4>[ 3.899537] exit newpart, retptr=, *num_parts=11
  357. <4>[ 3.904149] exit newpart, retptr=, *num_parts=11
  358. <4>[ 3.908774] exit newpart, retptr=, *num_parts=11
  359. <4>[ 3.913388] exit newpart, retptr=, *num_parts=11
  360. <4>[ 3.918012] exit newpart, retptr=, *num_parts=11
  361. <4>[ 3.922625] exit newpart, retptr=, *num_parts=11
  362. <4>[ 3.927249] exit newpart, retptr=, *num_parts=11
  363. <4>[ 3.931863] exit newpart, retptr=, *num_parts=11
  364. <4>[ 3.936487] exit newpart, retptr=, *num_parts=11
  365. <5>[ 3.941106] 11 cmdlinepart partitions found on MTD device rk29xxnand
  366. <5>[ 3.947468] Creating 11 MTD partitions on "rk29xxnand":
  367. <5>[ 3.952694] 0x000000400000-0x000000800000 : "misc"
  368. <5>[ 3.958738] 0x000000800000-0x000001000000 : "kernel"
  369. <5>[ 3.964630] 0x000001000000-0x000002000000 : "boot"
  370. <5>[ 3.970351] 0x000002000000-0x000003000000 : "recovery"
  371. <5>[ 3.976434] 0x000003000000-0x000023000000 : "backup"
  372. <5>[ 3.983336] 0x000023000000-0x00002a400000 : "cache"
  373. <5>[ 3.989378] 0x00002a400000-0x00006a400000 : "userdata"
  374. <5>[ 3.997634] 0x00006a400000-0x00006a800000 : "kpanic"
  375. <6>[ 4.003664] apanic: Bound to mtd partition 'kpanic'
  376. <6>[ 4.008585] apanic: No panic data available
  377. <5>[ 4.012918] 0x00006a800000-0x00008a800000 : "system"
  378. <5>[ 4.019966] 0x00008a800000-0x0000edc00000 : "user"
  379. <5>[ 4.029142] 0x0000edc00000-0x0000ee000000 : "factory"
  380. <4>[ 4.035102] startBlk = 292 sysProtAddr = 291
  381. <6>[ 4.040684] sn_table_len=218!!!!!!!!!!!
  382. <6>[ 4.044541] sn=XXJND1U008C8708!!!!!!!!!!!
  383. <6>[ 4.048591] sn=XXJND1U008C8708!!!!!!!!!!!
  384. <6>[ 4.052615] ts_state=1!!!!!!!!!!!!!!
  385. <6>[ 4.083848] EXT3-fs: barriers not enabled
  386. <6>[ 4.088097] EXT3-fs (mtdblock8): mounted filesystem with ordered data mode
  387. <6>[ 4.095165] kjournald starting. Commit interval 5 seconds
  388. <6>[ 4.133444] EXT3-fs: barriers not enabled
  389. <6>[ 4.137825] EXT3-fs (mtdblock6): using internal journal
  390. <6>[ 4.143052] EXT3-fs (mtdblock6): mounted filesystem with ordered data mode
  391. <6>[ 4.149986] kjournald starting. Commit interval 5 seconds
  392. <6>[ 4.165106] EXT3-fs: barriers not enabled
  393. <6>[ 4.169494] EXT3-fs (mtdblock5): using internal journal
  394. <6>[ 4.174727] EXT3-fs (mtdblock5): mounted filesystem with ordered data mode
  395. <6>[ 4.181657] kjournald starting. Commit interval 5 seconds
  396. <3>[ 4.202289] init: cannot find '/system/bin/copyapk', disabling 'copyapk'
  397. <3>[ 4.231883] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  398. <4>[ 4.305739] drivers/misc/rk29_modem/rk29_modem.c[197]: irq_bbwakeupap_handler
  399. <4>[ 4.312887] drivers/misc/rk29_modem/modem_tct_m70.c[138]: m70_irq_handler
  400. <4>[ 4.319670] m70_irq_handler: already wakeup
  401. <4>[ 4.334566] bp_wakeup_ap_work
  402. <4>[ 4.409394] ------------[ cut here ]------------
  403. <4>[ 4.414035] WARNING: at fs/proc/generic.c:586 proc_register+0x1a0/0x218()
  404. <4>[ 4.420879] proc_dir_entry '/proc/vpu_mem' already registered
  405. <4>[ 4.426682] [<c058a098>] (unwind_backtrace+0x0/0xf0) from [<c05a9bac>] (warn_slowpath_common+0x4c/0x64)
  406. <4>[ 4.436106] [<c05a9bac>] (warn_slowpath_common+0x4c/0x64) from [<c05a9c44>] (warn_slowpath_fmt+0x2c/0x3c)
  407. <4>[ 4.445692] [<c05a9c44>] (warn_slowpath_fmt+0x2c/0x3c) from [<c065a27c>] (proc_register+0x1a0/0x218)
  408. <4>[ 4.454829] [<c065a27c>] (proc_register+0x1a0/0x218) from [<c065a37c>] (proc_create_data+0x88/0xa4)
  409. <4>[ 4.463900] [<c065a37c>] (proc_create_data+0x88/0xa4) from [<bf0e9020>] (vpu_mem_init+0x20/0x3c [vpu_mem])
  410. <4>[ 4.473581] [<bf0e9020>] (vpu_mem_init+0x20/0x3c [vpu_mem]) from [<c05803c8>] (do_one_initcall+0x94/0x164)
  411. <4>[ 4.483256] [<c05803c8>] (do_one_initcall+0x94/0x164) from [<c05d89bc>] (sys_init_module+0x70/0x190)
  412. <4>[ 4.492411] [<c05d89bc>] (sys_init_module+0x70/0x190) from [<c0585940>] (ret_fast_syscall+0x0/0x30)
  413. <4>[ 4.501464] ---[ end trace 2dc6d772f742326f ]---
  414. <3>[ 4.507141] Error: Driver 'vpu_mem' is already registered, aborting...
  415. <4>[ 4.573121] vpu: power on
  416. <6>[ 4.607895] VPU_SERVICE: failed to reserve dec HW regs
  417. <3>[ 4.613045] VPU_SERVICE: reserve io failed
  418. <4>[ 4.625649] vpu: power off...done
  419. <6>[ 4.651263] VPU_SERVICE: init failed
  420. <4>[ 4.761421] galcore: module is from the staging directory, the quality is unknown, you have been warned.
  421. <3>[ 4.792475] galcore: module is already loaded
  422. <4>[ 4.803554] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
  423. <4>[ 4.822117] rk29_ipp: Unknown symbol ipp_blit_sync (err 0)
  424. <4>[ 4.888175] .341.. MMC0 receive the message sd-No-Media from VOLD.====xbw[sd_mmc]====
  425. <4>[ 4.896057] .385.. MMC0 receive the message No-Media from VOLD. waitTimes=0 ====xbw[sd_mmc]====
  426. <6>[ 4.931626] [WMT-DEV][I]WMT_init:WMT Version= Combo WMT Driver - v1.0 DATE=2011/10/04
  427. <4>[ 4.946159] .341.. MMC0 receive the message sd-Pending from VOLD.====xbw[sd_mmc]====
  428. <4>[ 4.954067] .341.. MMC0 receive the message sd-Idle-Unmounted from VOLD.====xbw[sd_mmc]====
  429. <6>[ 4.973753] [PSM][I]stp_psm_init: psm init (0xbf14196c, 5128)
  430. <6>[ 4.979850] [PSM][I]_stp_psm_init_monitor: init monitor
  431. <6>[ 4.985180] [STPDbg]stp_dbg_init: stp-dbg init
  432. <6>[ 4.994869] [STP-C]mtk_wcn_stp_dbg_enable:[I] STP dbg mode is turned on
  433. <4>[ 5.008455] WMT_init:stpwmt installed
  434. <6>[ 5.012122] [WMT-DEV][I]WMT_init:driver(major 190) installed
  435. <6>[ 5.031790] [WMT-DEV][I]wmt_dev_read_file:open (/system/etc/firmware/WMT.cfg) O_RDONLY, 0
  436. <6>[ 5.056695] [WMT-CONF][I]wmt_conf_read_file:get full file name(/system/etc/firmware/WMT.cfg) buf(0xd384d000) size(673)
  437. <6>[ 5.069477] [WMT-CONF][I]wmt_conf_read_file:&gDevWmt.rWmtGenConf=bf13e24c
  438. <6>[ 5.082239] [WMT-LIB][I]wmt_lib_init:set pwr on seq par to hw conf
  439. <6>[ 5.095659] [WMT-LIB][I]wmt_lib_init:ldo(0)rst(0)on(0)off(0)rtc(0)
  440. <7>[ 5.101843] [cmb_stub] registered, p_stub_cb:0xd301dedc size(12)
  441. <4>[ 5.101856] [WMT-CMB-HW][W]mtk_wcn_cmb_hw_init:invalid pPwrSeqTime parameter, use default hw init sequence parameters
  442. <6>[ 5.128594] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_dmp_seq:combo chip power on sequence time, RTC (100), LDO (100), RST(30), OFF(10), ON(30)
  443. <6>[ 5.144249] [WMT-LIB][I]wmtd_thread:wmtd thread starts
  444. <6>[ 5.156769] [WMT-DEV][I]WMT_init:success
  445. <6>[ 5.356516] GPS: mt3326_gps_power: Switching GPS device on
  446. <6>[ 5.362005] GPS: mt3326_gps_power: ignore power control: 1
  447. <6>[ 5.382328] GPS: mt3326_gps_probe: Registering chardev
  448. <6>[ 5.395680] GPS: mt3326_gps_probe: major: 250, minor: 0
  449. <6>[ 5.407460] GPS: mt3326_gps_probe: Done
  450. <4>[ 5.447419] GPS_init:stpgps installed
  451. <5>[ 5.463976] [D_INIT]mt_fm_probe()
  452. <5>[ 5.475592] [D_INIT]create_proc_entry success
  453. <5>[ 5.485908] [D_INIT]create_config_entry success
  454. <5>[ 5.490437] [D_INIT]******fm config info******
  455. <5>[ 5.494878] [D_INIT]***chip: MT6620
  456. <5>[ 5.521383] [D_INIT]***band: 1
  457. <5>[ 5.524528] [D_INIT]***freq_min: 875
  458. <5>[ 5.537786] [D_INIT]***freq_max: 1080
  459. <5>[ 5.541546] [D_INIT]***scan_tbl: 40
  460. <5>[ 5.545122] [D_INIT]***space: 1
  461. <5>[ 5.555856] [D_INIT]***rssi_long: 0x0301
  462. <5>[ 5.559868] [D_INIT]***rssi_short: 0x02e0
  463. <5>[ 5.563965] [D_INIT]***CQI: 0x00e9
  464. <5>[ 5.578041] [D_INIT]******fm config end******
  465. <5>[ 5.660297] [D_INIT]mtk_fm_probe, FM probe ...
  466. <5>[ 5.664748] [D_INIT]fm_priv_register(), [pri=0xd301df20][op=0xbf213c28]
  467. <6>[ 5.671651] usb 1-1: new high speed USB device number 2 using usb20_host
  468. <5>[ 5.716008] [D_INIT]init, FM init ok
  469. <5>[ 5.719600] [D_INIT]mtk_fm_probe, FM probe ok
  470. <3>[ 5.746274] android_usb: already disabled
  471. <6>[ 5.786007] adb_bind_config
  472. <6>[ 5.797107] warning: `adbd' uses 32-bit capabilities (legacy support in use)
  473. <6>[ 5.825743] adb_open
  474. <6>[ 5.888568] [WMT-DEV][I]WMT_open:major 10 minor 39 (pid 128)
  475. <6>[ 5.894240] [WMT-DEV][I]WMT_open:1st call
  476. <6>[ 5.905798] [mtk_wcn_stp_set_if_tx_type] set STP_IF_TX to UART.
  477. <6>[ 5.911724] [WMT-LIB][I]wmt_lib_set_hif:new hifType:0, fcCtrl:0, baud:1000000, fm:2
  478. <6>[ 5.929156] usb 1-1: New USB device found, idVendor=1bbb, idProduct=0017
  479. <6>[ 5.943079] [WMT-C][I]opfunc_hif_conf:WMT HIF info added
  480. <6>[ 5.948491] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
  481. <6>[ 5.960938] usb 1-1: Product: HSPA Data Card
  482. <6>[ 5.965212] usb 1-1: Manufacturer: USBModem
  483. <6>[ 5.979148] usb 1-1: SerialNumber: 1234567890ABCDEF
  484. <4>[ 5.993916] Skip device
  485. <6>[ 6.003934] option 1-1:1.0: GSM modem (1-port) converter detected
  486. <6>[ 6.015751] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
  487. <4>[ 6.028204] Skip device
  488. <6>[ 6.030795] option 1-1:1.1: GSM modem (1-port) converter detected
  489. <6>[ 6.053894] EXT3-fs: barriers not enabled
  490. <6>[ 6.058754] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
  491. <6>[ 6.066213] EXT3-fs (mtdblock10): using internal journal
  492. <6>[ 6.071529] EXT3-fs (mtdblock10): mounted filesystem with ordered data mode
  493. <6>[ 6.078516] kjournald starting. Commit interval 5 seconds
  494. <4>[ 6.087211] Skip device
  495. <6>[ 6.089817] option 1-1:1.2: GSM modem (1-port) converter detected
  496. <6>[ 6.113648] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
  497. <4>[ 6.128828] Skip device
  498. <6>[ 6.131428] option 1-1:1.3: GSM modem (1-port) converter detected
  499. <6>[ 6.167716] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
  500. <4>[ 6.195816] Skip device
  501. <6>[ 6.198449] option 1-1:1.4: GSM modem (1-port) converter detected
  502. <6>[ 6.237855] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
  503. <4>[ 6.285981] Skip device
  504. <6>[ 6.288613] option 1-1:1.5: GSM modem (1-port) converter detected
  505. <6>[ 6.331002] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB5
  506. <4>[ 6.360332] Skip device
  507. <6>[ 6.362969] option 1-1:1.6: GSM modem (1-port) converter detected
  508. <6>[ 6.402409] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB6
  509. <3>[ 6.777240] gc0309 sensor_ioctl cmd(0x3) is unknown !
  510. <3>[ 7.803017] init: sys_prop: permission denied uid:1003 name:sys.gvglk.version
  511. <3>[ 7.816032] init: sys_prop: permission denied uid:1003 name:sys.gvglu.version
  512. <4>[ 9.336276] gpu: change freq to 552, got 396
  513. <6>[ 18.315632] DWC_OTG: ********vbus detect*********************************************
  514. <6>[ 18.662464] DWC_OTG: ********soft connect!!!*****************************************
  515. <6>[ 20.315632] DWC_OTG: ********soft reconnect******************************************
  516. <6>[ 20.622469] DWC_OTG: ********soft connect!!!*****************************************
  517. <6>[ 22.315655] DWC_OTG: ********soft reconnect******************************************
  518. <6>[ 22.714218] DWC_OTG: ********soft connect!!!*****************************************
  519. <6>[ 27.560466] request_suspend_state: wakeup (3->0) at 27564849030 (2014-01-06 15:43:31.415201473 UTC)
  520. <6>[ 27.889133] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
  521. <4>[ 27.895424] [STP-C]mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
  522. <6>[ 27.915731] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
  523. <6>[ 27.924368] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
  524. <6>[ 27.945733] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
  525. <6>[ 27.952469] [WMT-PLAT][I]wmt_plat_wifi_eint_ctrl:WMT-PLAT:WIFI EINT is controlled by MSDC driver
  526. <6>[ 28.066066] acc_open
  527. <6>[ 28.068475] acc_release
  528. <6>[ 28.127800] combo-module turn off power
  529. <6>[ 28.143599] combo-module reset out 1
  530. <6>[ 28.168198] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(0) start
  531. <4>[ 28.168220] [WMT-PLAT][W]wmt_plat_wake_lock_ctrl:WMT-PLAT: wakelock status(1), counter(2)
  532. <6>[ 28.206358] combo-module turn on power
  533. <6>[ 28.255680] combo-module reset out 1
  534. <6>[ 28.295740] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:BGFInt (init)
  535. <4>[ 28.316542] 700..wmt_plat_eirq_ctrl: BGF_INT gpio_init value = 1 ====mt6620===
  536. <6>[ 28.341927] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:BGFInt (dis)
  537. <6>[ 28.357182] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
  538. <6>[ 28.374795] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
  539. <4>[ 28.388235] serial.2 clock:16000000
  540. <4>[ 28.391792] serial.2 baud:9600
  541. <4>[ 28.400871] serial.2 quot:104
  542. <4>[ 28.405976] serial.2 clock:16000000
  543. <4>[ 28.420694] serial.2 baud:115200
  544. <4>[ 28.430273] serial.2 quot:9
  545. <6>[ 28.435903] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
  546. <6>[ 28.445733] [WMT-C][I]wmt_core_stp_init:open stp ok, expect host baudrate to be (115200)
  547. <6>[ 28.501735] [STP-C]mtk_wcn_stp_enable:[I] set the current enable = (0)
  548. <6>[ 28.501759] [PSM][I]_stp_psm_reset: _stp_psm_reset
  549. <6>[ 28.501769] [PSM][I]_stp_psm_reset: reset-wake_lock(0)
  550. <6>[ 28.501780] [PSM][I]_stp_psm_reset: reset-wake_lock(0)
  551. <6>[ 28.501794] [PSM][I]_stp_psm_set_state: work_state = ACT --> ACT
  552. <6>[ 28.501809] [STP-C]mtk_wcn_stp_ready:[I] set ready (0)
  553. <6>[ 28.501819] [STP-C]mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
  554. <6>[ 28.501834] [STP-C]mtk_wcn_stp_enable:[I] set the current enable = (1)
  555. <6>[ 28.555433] [WMT-C][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
  556. <6>[ 28.565750] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
  557. <6>[ 28.575753] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
  558. <6>[ 28.575770] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
  559. <6>[ 28.575784] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
  560. <6>[ 28.575798] [WMT-C][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
  561. <6>[ 28.575810] [WMT-IC][I]mt6620_sw_init:no Flow Control (uartFcCtrl:0)
  562. <4>[ 28.646173] serial.2 clock:16000000
  563. <4>[ 28.646185] serial.2 baud:1000000
  564. <4>[ 28.646191] serial.2 quot:1
  565. <6>[ 28.646315] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_1000000_0) result(0)
  566. <6>[ 28.646341] [WMT-IC][I]mt6620_sw_init:change host baudrate(1000000) ok
  567. <6>[ 28.665783] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
  568. <6>[ 28.665809] [WMT-DEV][I]wmt_dev_read_file:open (/system/etc/firmware/mt6620_patch_e3_hdr.bin) O_RDONLY, 0
  569. <6>[ 28.671259] [WMT-IC][I]mt6620_patch_dwn:===========================================
  570. <6>[ 28.671277] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120605180607
  571. <6>[ 28.671287] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
  572. <6>[ 28.671296] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
  573. <6>[ 28.671305] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001f
  574. <6>[ 28.671313] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
  575. <6>[ 28.671327] [WMT-IC][I]mt6620_patch_dwn:===========================================
  576. <6>[ 29.616964] [WMT-IC][I]mt6620_patch_dwn_nodiv:wmt_core: patch dwn:0 frag(43, 892) ok
  577. <6>[ 29.666743] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
  578. <6>[ 29.677730] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf13e24c)
  579. <6>[ 29.775853] [WMT-IC][I]mt6620_sw_init:init_coex ok
  580. <6>[ 29.795768] [STP-C]mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
  581. <6>[ 29.824839] [STP-C]mtk_wcn_stp_enable:[I] set the current enable = (1)
  582. <6>[ 29.824862] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
  583. <6>[ 29.865881] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
  584. <4>[ 29.905416] [STP-C]mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
  585. <6>[ 29.966646] [STP-C]mtk_wcn_stp_ready:[I] set ready (1)
  586. <6>[ 30.055797] rk29sdk_wifi_power: 1
  587. <6>[ 31.574464] wifi turn on power
  588. <6>[ 31.580384] rk29sdk_wifi_set_carddetect:1
  589. <6>[ 31.584415] mmc1: slot status change detected(0-1)
  590. <4>[ 31.589313] rk29_sdmmc_change_clk_div..1714.. newDiv=60, newCLK=300Khz====xbw[sdio]=====
  591. <4>[ 31.795734]
  592. <4>[ 31.795740] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....======xbw[mmc1]=====
  593. <4>[ 31.922690]
  594. <4>[ 31.922695] mmc_attach_sdio..800.. ===== Begin to identify card as SDIO-card===xbw[mmc1]===
  595. <4>[ 32.122316] rk29_sdmmc_change_clk_div..1714.. newDiv=0, newCLK=36000Khz====xbw[sdio]=====
  596. <6>[ 32.200581] mmc1: new high speed SDIO card at address 0001
  597. <4>[ 32.246200] mmc_rescan_try_freq..1674.. ===== Initialize SDIO successfully. ===xbw[mmc1]===
  598. <6>[ 33.429133] GPS: mt3326_gps_power: Switching GPS device off
  599. <6>[ 33.731603] GPS: mt3326_gps_power: Switching GPS device off
  600. <6>[ 33.740546] GPS: mt3326_gps_power: ignore power control: 0
  601. <6>[ 33.936810] [WMT-C][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
  602. <4>[ 34.057380] [WMT-PLAT][W]wmt_plat_wake_lock_ctrl:WMT-PLAT: wakelock status(1), counter(1)
  603. <6>[ 34.083467] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
  604. <6>[ 34.292711] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  605. <6>[ 34.645788] [WMT-C][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
  606. <6>[ 34.758905] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(0) ok
  607. <4>[ 34.803928] [HCI-STP][E]file_read:Failed to open /data/BT.cfg!
  608. <4>[ 34.883261] [HCI-STP][E]file_read:Failed to open /data/bluetooth/BT.cfg!
  609. <4>[ 34.960010] [HCI-STP][E]file_read:Failed to open /system/etc/firmware/BT.cfg!
  610. <4>[ 35.002845] [HCI-STP][E]load_internal_bt_conf:Try to read built-in BT config, error
  611. <4>[ 35.037372] [HCI-STP][E]hci_stp_open:Load internal BT config failed!
  612. <3>[ 36.135130] init: sys_prop: permission denied uid:10018 name:sys.gvglk.version
  613. <3>[ 36.180723] init: sys_prop: permission denied uid:10018 name:sys.gvglu.version
  614. <6>[ 37.505823] rk29_adc_battery_charger_detect_work: charger=2
  615. <4>[ 37.538743] .341.. MMC0 receive the message sd-Checking from VOLD.====xbw[sd_mmc]====
  616. <6>[ 37.595817] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(0) start
  617. <4>[ 37.634754] .341.. MMC0 receive the message sd-Mounted from VOLD.====xbw[sd_mmc]====
  618. <6>[ 37.656100] [WMT-C][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
  619. <6>[ 37.731374] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(0) ok
  620. <6>[ 37.855697] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(0) start
  621. <6>[ 38.465823] [WMT-C][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
  622. <6>[ 38.530487] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(0) ok
  623. <4>[ 38.567221] [HCI-STP][E]file_read:Failed to open /data/BT.cfg!
  624. <4>[ 38.573080] [HCI-STP][E]file_read:Failed to open /data/bluetooth/BT.cfg!
  625. <4>[ 38.711096] [HCI-STP][E]file_read:Failed to open /system/etc/firmware/BT.cfg!
  626. <4>[ 38.745691] [HCI-STP][E]load_internal_bt_conf:Try to read built-in BT config, error
  627. <4>[ 38.807678] [HCI-STP][E]hci_stp_open:Load internal BT config failed!
  628. <4>[ 40.216413] capacity = 8, new_capacity = 0, old_capacity = 8
  629. <4>[ 44.090820] gpu: change freq to 288, got 288
  630. <4>[ 44.662775] gpu: change freq to 552, got 396
  631. <6>[ 44.915683] [PSM][I]_stp_psm_stp_is_idle: **IDLE is over 5000 msec, go to sleep!!!**
  632. <6>[ 44.915694]
  633. <6>[ 44.924931] [PSM][I]_stp_psm_set_state: work_state = ACT --> ACT_INACT
  634. <6>[ 44.944615] [WMT-LIB][I]wmt_lib_ps_handler:enable host eirq
  635. <6>[ 44.950495] [WMT-C][I]opfunc_pwr_sv:Send sleep command OK!
  636. <6>[ 44.961194] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:BGFInt (en)
  637. <6>[ 44.983825] [WMT-LIB][I]wmt_lib_ps_handler:enable host eirq done
  638. <6>[ 45.001520] [PSM][I]_stp_psm_set_state: work_state = ACT_INACT --> INACT
  639. <6>[ 45.025233] src = COMBO_IF_UART, to enter deep idle? 1
  640. <4>[ 51.297314] gpu: change freq to 288, got 288
  641. <4>[ 51.414223] gpu: change freq to 552, got 396
  642. <4>[ 69.987221] gpu: change freq to 288, got 288
  643. <4>[ 70.277834] gpu: change freq to 552, got 396
  644. <4>[ 74.480993] gpu: change freq to 288, got 288
  645. <4>[ 77.140150] gpu: change freq to 552, got 396
  646. <4>[ 82.649454] gpu: change freq to 288, got 288
  647. <4>[ 95.706705] gpu: change freq to 552, got 396
  648. <4>[ 99.368521] gpu: change freq to 288, got 288
  649. <4>[ 102.382770] gpu: change freq to 552, got 396
  650. <3>[ 104.659618] init: sys_prop: permission denied uid:10050 name:sys.gvglk.version
  651. <3>[ 104.668794] init: sys_prop: permission denied uid:10050 name:sys.gvglu.version
  652. <3>[ 105.236476] init: sys_prop: permission denied uid:10050 name:sys.gstxe.version
  653. <6>[ 115.197873] [STP-C]mtk_wcn_stp_send_data:[I] #####Type = 0, to inform WMT to wakeup chip, ret = 5
  654. <6>[ 115.230730] [PSM][I]_stp_psm_set_state: work_state = INACT --> INACT_ACT
  655. <6>[ 115.230752] src = COMBO_IF_UART, to enter deep idle? 0
  656. <6>[ 115.230765] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:BGFInt (dis)
  657. <6>[ 115.230883] [STP-C]mtk_wcn_stp_send_data:[I] #####Type = 0, to inform WMT to wakeup chip, ret = 4
  658. <6>[ 115.264501] [WMT-C][I]opfunc_pwr_sv:Send wakeup command OK!
  659. <6>[ 115.264584] [PSM][I]_stp_psm_set_state: work_state = INACT_ACT --> ACT
  660. <6>[ 115.745865] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(0) start
  661. <6>[ 115.755790] [WMT-C][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
  662. <6>[ 115.766347] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(0) ok
  663. <6>[ 120.775669] [PSM][I]_stp_psm_stp_is_idle: **IDLE is over 5000 msec, go to sleep!!!**
  664. <6>[ 120.775679]
  665. <6>[ 120.775761] [PSM][I]_stp_psm_set_state: work_state = ACT --> ACT_INACT
  666. <6>[ 120.775786] [WMT-LIB][I]wmt_lib_ps_handler:enable host eirq
  667. <6>[ 120.775795] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:BGFInt (en)
  668. <6>[ 120.775809] [WMT-LIB][I]wmt_lib_ps_handler:enable host eirq done
  669. <6>[ 120.809838] [WMT-C][I]opfunc_pwr_sv:Send sleep command OK!
  670. <6>[ 120.809876] [PSM][I]_stp_psm_set_state: work_state = ACT_INACT --> INACT
  671. <6>[ 120.809886] src = COMBO_IF_UART, to enter deep idle? 1
  672. <6>[ 121.012484] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  673. <3>[ 126.466658] init: sys_prop: permission denied uid:1001 name:sys.gvglk.version
  674. <3>[ 126.474354] init: sys_prop: permission denied uid:1001 name:sys.gvglu.version
  675. <7>[ 131.765635] wlan0: no IPv6 routers present
  676. <4>[ 142.960058] gpu: change freq to 288, got 288
  677. <4>[ 143.161885] gpu: change freq to 552, got 396
  678. <4>[ 149.451050] gpu: change freq to 288, got 288
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×