Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- scott@n550jk:~$ cat fangboot3.txt
- scott@n550jk:~/Downloads$ cu esp
- Connected.
- U-Boot SPL 2013.07 (Jul 05 2018 - 17:59:02)
- pll_init:365
- l2cache_clk = 375000000
- pll_cfg.pdiv = 8, pll_cfg.h2div = 4, pll_cfg.h0div = 4, pll_cfg.cdiv = 1, pll_cfg.l2div = 2
- nf=30 nr = 1 od0 = 1 od1 = 1
- cppcr is 03c05100
- CPM_CPAPCR 03b0890d
- nf=42 nr = 1 od0 = 1 od1 = 1
- cppcr is 02a04900
- CPM_CPMPCR 07d0c90d
- nf=50 nr = 1 od0 = 1 od1 = 1
- cppcr is 03204900
- CPM_CPVPCR 0320490d
- cppcr 0x9a794410
- apll_freq 712704000
- mpll_freq 1000000000
- vpll_freq = 1200000000
- ddr sel mpll, cpu sel apll
- ddrfreq 500000000
- cclk 712704000
- l2clk 356352000
- h0clk 250000000
- h2clk 250000000
- pclk 125000000
- DDRC_DLP:0000f003
- U-Boot 2013.07 (Jul 05 2018 - 17:59:02)
- Board: ISVP (Ingenic XBurst T20 SoC)
- DRAM: 64 MiB
- Top of RAM usable for U-Boot at: 84000000
- Reserving 400k for U-Boot at: 83f98000
- Reserving 32784k for malloc() at: 81f94000
- Reserving 32 Bytes for Board Info at: 81f93fe0
- Reserving 124 Bytes for Global Data at: 81f93f64
- Reserving 128k for boot params() at: 81f73f64
- Stack Pointer at: 81f73f48
- Now running in RAM - U-Boot at: 83f98000
- MMC: msc: 0
- the manufacturer c8
- SF: Detected GD25Q128
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- misc_init_r before change the IR_cut_gpio
- gpio_request lable = IR_cut_gpio gpio = 25
- misc_init_r after gpio_request the IR_cut_gpio ret is 25
- misc_init_r after change the IR_cut_gpio ret is 0
- misc_init_r before change the TF_CD_gpio
- gpio_request lable = TF_CD_gpio gpio = 43
- misc_init_r after gpio_request the TF_CD_gpio ret is 43
- misc_init_r after change the TF_CD_gpio ret is 0
- misc_init_r before change the SD_enable_gpio
- gpio_request lable = SD_able_gpio gpio = 48
- misc_init_r after gpio_request the SD_able_gpio ret is 48
- misc_init_r after change the SD_able_gpio ret is 0
- misc_init_r before change the wifi_reset_gpio
- gpio_request lable = wifi_reset_gpio gpio = 46
- misc_init_r after gpio_request the wifi_reset_gpio ret is 46
- misc_init_r after change the wifi_reset_gpio ret is 1
- misc_init_r before change the yellow_gpio
- gpio_request lable = yellow_gpio gpio = 38
- misc_init_r after gpio_request the yellow_gpio ret is 38
- misc_init_r after change the yellow_gpio ret is 0
- misc_init_r before change the blue_gpio
- gpio_request lable = blue_gpio gpio = 39
- misc_init_r after gpio_request the blue_gpio ret is 39
- misc_init_r after change the blue_gpio ret is 1
- gpio_request lable = night_led_gpio gpio = 81
- misc_init_r after gpio_request the night_led_gpio ret is 81
- misc_init_r after change the night_led_gpio ret is 0
- misc_init_r before change the wifi_enable_gpio
- gpio_request lable = wifi_enable_gpio gpio = 62
- misc_init_r after gpio_request the wifi_enable_gpio ret is 62
- misc_init_r after change the wifi_enable_gpio ret is 0
- misc_init_r before change the SPK_able_gpio
- gpio_request lable = SPK_able_gpio gpio = 63
- misc_init_r after gpio_request the SPK_able_gpio ret is 63
- misc_init_r after change the SPK_able_gpio ret is 0
- misc_init_r before change the USB_able_gpio
- gpio_request lable = USB_able_gpio gpio = 47
- misc_init_r after gpio_request the USB_able_gpio ret is 47
- misc_init_r after change the USB_able_gpio ret is 0
- Hit any key to stop autoboot: 0
- jiabo_do_auto_update!!!!!!!!!!!!!!!!!!!!!!!!
- gpio_request lable = sdupgrade gpio = 46
- the manufacturer c8
- SF: Detected GD25Q128
- jiabo_update_to_flash!!!!!!!!!!!!!!!!!!!!!!!!
- jiabo_au_do_update!!!!!!!!!!!!!!!!!!!!!!!!
- start=0
- start=40000
- len=40000
- flash check read...
- FWGRADEUP not find !!!!!!!!!
- gradeup check fail!!!!!!!!!!!!!!!!!!!
- the manufacturer c8
- SF: Detected GD25Q128
- Erasing SPI flash...addr align as 10000 !
- sfc erase error
- the manufacturer c8
- SF: Detected GD25Q128
- --->probe spend 4 ms
- SF: 2621440 bytes @ 0x40000 Read: OK
- --->read spend 339 ms
- ## Booting kernel from Legacy Image at 80600000 ...
- Image Name: Linux-3.10.14
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1805541 Bytes = 1.7 MiB
- Load Address: 80010000
- Entry Point: 803e30f0
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.14 (root@ubuntu) (gcc version 4.7.2 (Ingenic r2.3.3 2016.12) ) #21 PREEMPT Thu Oct 19 11:38:16 CST 2017
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 RESET ERROR PC:ECABE072
- [ 0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst)
- [ 0.000000] FPU revision is: 00b70000
- [ 0.000000] CCLK:712MHz L2CLK:356Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 0051b000 @ 00010000 (usable)
- [ 0.000000] memory: 00035000 @ 0052b000 (usable after init)
- [ 0.000000] User-defined physical RAM map:
- [ 0.000000] memory: 028b9000 @ 00000000 (usable)
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x028b8fff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x028b8fff]
- [ 0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
- [ 0.000000] pls check processor_id[0x00d00101],sc_jz not support!
- [ 0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes.
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 10343
- [ 0.000000] Kernel command line: console=ttyS1,115200n8 mem=41700K@0x0 ispmem=8M@0x28B9000 rmem=15644K@0x30B9000 init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag)
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Memory: 35192k/41700k available (3951k kernel code, 6508k reserved, 1276k data, 212k init, 0k highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:418
- [ 0.000000] clockevents_config_and_register success.
- [ 0.000028] Calibrating delay loop... 709.42 BogoMIPS (lpj=3547136)
- [ 0.057699] pid_max: default: 32768 minimum: 301
- [ 0.062744] Mount-cache hash table entries: 512
- [ 0.067958] Initializing cgroup subsys debug
- [ 0.072224] Initializing cgroup subsys freezer
- [ 0.079776] regulator-dummy: no parameters
- [ 0.084053] NET: Registered protocol family 16
- [ 0.109156] bio: create slab <bio-0> at 0
- [ 0.116030] jz-dma jz-dma: JZ SoC DMA initialized
- [ 0.121293] SCSI subsystem initialized
- [ 0.125376] usbcore: registered new interface driver usbfs
- [ 0.130918] usbcore: registered new interface driver hub
- [ 0.136420] usbcore: registered new device driver usb
- [ 0.141726] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL)
- [ 0.148020] (null): set:249 hold:250 dev=100000000 h=500 l=500
- [ 0.154149] media: Linux media interface: v0.10
- [ 0.158750] Linux video capture interface: v2.00
- [ 0.165941] Switching to clocksource jz_clocksource
- [ 0.171610] jz-dwc2 jz-dwc2: cgu clk gate get error
- [ 0.176616] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.183080] jz-dwc2 jz-dwc2: regulator vbus get error
- [ 0.188138] DWC IN OTG MODE
- [ 0.341052] sft id =========================off
- [ 0.345673] dwc2 dwc2: Keep PHY ON
- [ 0.349046] dwc2 dwc2: Using Buffer DMA mode
- [ 0.552746] dwc2 dwc2: Core Release: 3.00a
- [ 0.556862] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
- [ 0.563220] dwc2 dwc2: new USB bus registered, assigned bus number 1
- [ 0.570761] hub 1-0:1.0: USB hub found
- [ 0.574580] hub 1-0:1.0: 1 port detected
- [ 0.578647] dwc2 dwc2: DWC2 Host Initialized
- [ 0.583220] NET: Registered protocol family 2
- [ 0.588279] TCP established hash table entries: 512 (order: 0, 4096 bytes)
- [ 0.595266] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.601667] TCP: Hash tables configured (established 512 bind 512)
- [ 0.607975] TCP: reno registered
- [ 0.611210] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.617111] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.623810] NET: Registered protocol family 1
- [ 0.628542] RPC: Registered named UNIX socket transport module.
- [ 0.634565] RPC: Registered udp transport module.
- [ 0.639258] RPC: Registered tcp transport module.
- [ 0.644045] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.651176] freq_udelay_jiffys[0].max_num = 10
- [ 0.655606] cpufreq udelay loops_per_jiffy
- [ 0.660037] dwc2 dwc2: ID PIN CHANGED!
- [ 0.663896] init DWC as A_HOST
- [ 0.666942] 12000 59724 59724
- [ 0.670180] 24000 119448 119448
- [ 0.673758] 60000 298620 298620
- [ 0.677128] 120000 597241 597241
- [ 0.680659] 200000 995402 995402
- [ 0.684313] 300000 1493103 1493103
- [ 0.687948] 600000 2986206 2986206
- [ 0.691683] 792000 3941793 3941793
- [ 0.695365] 1008000 5016827 5016827
- [ 0.699161] 1200000 5972413 5972413
- [ 0.709611] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.716727] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
- [ 0.723425] msgmni has been set to 68
- [ 0.728738] io scheduler noop registered
- [ 0.732811] io scheduler cfq registered (default)
- [ 0.739595] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1
- [ 0.748253] console [ttyS1] enabled, bootconsole disabled
- [ 0.748253] console [ttyS1] enabled, bootconsole disabled
- [ 0.764437] brd: module loaded
- [ 0.770095] loop: module loaded
- [ 0.774426] zram: Created 2 device(s) ...
- [ 0.778654] logger: created 256K log 'log_main'
- [ 0.784152] jz SADC driver registeres over!
- [ 0.789623] jz TCU driver register completed
- [ 0.794803] the id code = c84018, the flash name is GD25Q127C
- [ 0.800731] JZ SFC Controller for SFC channel 0 driver register
- [ 0.806943] 11 cmdlinepart partitions found on MTD device jz_sfc
- [ 0.813152] Creating 11 MTD partitions on "jz_sfc":
- [ 0.818181] 0x000000000000-0x000000040000 : "boot"
- [ 0.823809] 0x000000040000-0x000000240000 : "kernel"
- [ 0.829549] 0x000000240000-0x000000590000 : "root"
- [ 0.835189] 0x000000590000-0x000000630000 : "driver"
- [ 0.841006] 0x000000630000-0x000000ad0000 : "appfs"
- [ 0.846703] 0x000000ad0000-0x000000cd0000 : "backupk"
- [ 0.852628] 0x000000cd0000-0x000000d70000 : "backupd"
- [ 0.858476] 0x000000d70000-0x000000f70000 : "backupa"
- [ 0.864411] 0x000000f70000-0x000000fb0000 : "config"
- [ 0.870219] 0x000000fb0000-0x000000ff0000 : "para"
- [ 0.875904] 0x000000ff0000-0x000001000000 : "flag"
- [ 0.881547] SPI NOR MTD LOAD OK
- [ 0.884868] tun: Universal TUN/TAP device driver, 1.6
- [ 0.890069] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.896638] usbcore: registered new interface driver zd1201
- [ 0.902473] usbcore: registered new interface driver r8152
- [ 0.908220] usbcore: registered new interface driver usb-storage
- [ 0.914593] usbcore: registered new interface driver usbserial
- [ 0.920644] usbcore: registered new interface driver usbserial_generic
- [ 0.927447] usbserial: USB Serial support registered for generic
- [ 0.933697] usbcore: registered new interface driver ch341
- [ 0.939379] usbserial: USB Serial support registered for ch341-uart
- [ 0.945891] usbcore: registered new interface driver cp210x
- [ 0.951694] usbserial: USB Serial support registered for cp210x
- [ 0.957842] usbcore: registered new interface driver pl2303
- [ 0.963641] usbserial: USB Serial support registered for pl2303
- [ 1.469646] i8042: i8042 controller selftest timeout
- [ 1.475376] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing
- [ 1.490878] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0
- [ 1.520883] jzmmc_v1.2 jzmmc_v1.2.0: register success!
- [ 1.526252] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing
- [ 1.570991] jzmmc_v1.2 jzmmc_v1.2.1: register success!
- [ 1.576458] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.583450] usbcore: registered new interface driver usbhid
- [ 1.589190] usbhid: USB HID core driver
- [ 1.593494] TCP: cubic registered
- [ 1.596914] NET: Registered protocol family 17
- [ 1.602741] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 1.609880] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 1.621886] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 1.629590] Freeing unused kernel memory: 212K (8052b000 - 80560000)
- [ 1.773563] dwc2 dwc2: ++OTG Interrupt: A-Device Timeout Change++
- mdev is ok......
- [ 2.692941] wait stable.[246][cgu_msc0]
- [ 2.697020] mmc0: new high speed SDHC card at address aaaa
- [ 2.706572] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
- [ 2.724478] mmcblk0: p1
- Ingenic-uc1_1 login: [ 3.096085] register all isp device successfully!
- [ 3.103980] @@@@ tx-isp-probe ok @@@@@
- [ 3.165926] exFAT: Version 1.2.9
- [ 3.204512] motor_probe731
- [ 3.252097] jz_codec_register: probe() successful!
- [ 3.601367] dma dma0chan24: Channel 24 have been requested.(phy id 7,type 0x06 desc a1843000)
- [ 3.610655] dma dma0chan25: Channel 25 have been requested.(phy id 6,type 0x06 desc a1842000)
- [ 3.641685] jz_pwm_probe[198] d_name = tcu_chn0
- [ 3.659843] request pwm channel 0 successfully
- [ 3.667784] pwm-jz pwm-jz: jz_pwm_probe register ok !
- [ 4.117168] RTL871X: module init start
- [ 4.121131] RTL871X: rtl8189ftv v4.3.24.7_21113.20170208.nova.1.01
- [ 4.127495] RTL871X: build time: Nov 22 2017 16:25:23
- [ 4.132776] wlan power on
- [ 4.151381] RTL871X: module init ret=0
- [ 4.196746] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 4.218566] mmc1: new SDIO card at address 0001
- [ 4.243282] RTL871X: ++++++++rtw_drv_init: vendor=0x024c device=0xf179 class=0x07
- [ 4.305639] RTL871X: HW EFUSE
- [ 4.308733] RTL871X: hal_com_config_channel_plan chplan:0x20
- [ 4.434404] RTL871X: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
- [ 4.466640] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=c8:02:8f:7d:98:fd
- GPIO 25 in
- GPIO 26 out
- GPIO 25 out
- GPIO 43 out
- GPIO 47 out
- GPIO 49 in
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- right_count=3 value=0 last_value=0
- not in singleboard test
- start **********************************************************[ 8.264003] name : i2c-gpio1 nr : 1
- *********************the TZ is : UTC=UTC-8:00
- -----------------[ 8.272967] name : i2c0 nr : 0
- --------------------------------------------------
- xxq:begin to check the sensor type
- [ 8.342290] sensor_read: addr=0xa value = 0xf
- [ 8.347308] sensor_read: addr=0xb value = 0x23
- [ 8.352018] info: success sensor find : jxf23
- ##### sensor : jxf23
- [ 8.356701] misc sinfo_release
- [Add driver] insmod /driver/sensor_jxf23.ko
- [ 8.384927] zram0: detected capacity change from 0 to 16777216
- Setting up swapspace version 1, size = 16773120 bytes
- UUID=77425dc7-c66e-43a8-be07-f5f863a7f200
- [ 8.406898] Adding 16380k swap on /dev/zram0. Priority:-1 extents:1 across:16380k SS
- iCamera.c,242:icamera_init
- iCamera.c,245:TaskPool=f32de0
- msg_queue.c,211:msg_queue_remove_by_key_a: No such file or directory
- msg_queue.c,211:msg_queue_remove_by_key_a: No such file or directory
- msg_queue.c,211:msg_queue_remove_by_key_a: No such file or directory
- [watchDog]send watchdog message !!!
- hardware_ingenic.c,132:=====IngenicT20 initAllGpio=====
- -------------------------------------open gpio 46 direction
- -------------------------------------open gpio 25 direction
- gpio ------------- /sys/class/gpio/gpio25/value 0
- -------------------------------------open gpio 26 direction
- gpio ------------- /sys/class/gpio/gpio26/value 0
- -------------------------------------open gpio 38 direction
- gpio ------------- /sys/class/gpio/gpio38/value 0
- -------------------------------------open gpio 39 direction
- gpio ------------- /sys/class/gpio/gpio39/value 0
- -------------------------------------open gpio 49 direction
- gpio ------------- /sys/class/gpio/gpio49/value 0
- -------------------------------------open gpio 47 direction
- gpio ------------- /sys/class/gpio/gpio47/value 0
- -------------------------------------open gpio 48 direction
- gpio ------------- /sys/class/gpio/gpio48/value 0
- -------------------------------------open gpio 43 direction
- -------------------------------------open gpio 30 direction
- gpio ------------- /sys/class/gpio/gpio30/value 0
- hardware_ingenic.c,318:please modify your Makefile
- pin num == 30
- pin num == 30
- pin num == 30
- pin num == 30
- nRead acBuf[nReadLen-1] = a
- nRead acBuf[nReadLen-1] = a
- [START] test CONFIG_INFO_FIRMWARE = 5.6.2.77
- [START] Cam_firmware_HTTP = 5.6.2.77
- [START] CONFIG_INFO_FIRMWARE = 5.6.2.77
- <<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
- <<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
- <<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
- FIRM WARE VERSION : 5.6.2.77
- <<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
- g_stConfigTable[0] Wifi_Mode = D
- g_stConfigTable[1] Wifi_Active = y
- g_stConfigTable[2] Wifi_IP = 192.168.1.68
- g_stConfigTable[3] Wifi_Subnet = 255.255.255.0
- g_stConfigTable[4] Wifi_Gateway = 192.168.1.1
- g_stConfigTable[5] Wifi_DNS = 192.168.1.1
- g_stConfigTable[6] Wired_IP = 192.168.1.68
- g_stConfigTable[7] Wired_Mode = D
- g_stConfigTable[8] Wired_Subnet = 255.255.255.0
- g_stConfigTable[9] Wired_Gateway = 192.168.1.1
- g_stConfigTable[10] Wired_DNS = 192.168.1.1
- g_stConfigTable[11] Alarm_Motion_Switch = y
- g_stConfigTable[12] Alarm_Motion_Sensitivity = 5
- g_stConfigTable[13] Alarm_Motion_Region = 0,0;0,0
- g_stConfigTable[14] Alarm_Audio_Switch = y
- g_stConfigTable[15] Alarm_Audio_Sensitivity = 5
- g_stConfigTable[16] Alarm_Audio_SmokeYXMOD = 200
- g_stConfigTable[17] Alarm_pir_Switch = n
- g_stConfigTable[18] Alarm_Time_Period = 0,0,1440,127,300
- g_stConfigTable[19] Light_Net = y
- g_stConfigTable[20] Light_Night = y
- g_stConfigTable[21] Video_IPS = 30
- g_stConfigTable[22] Video_Bright = 7
- g_stConfigTable[23] Video_Constract = 3
- g_stConfigTable[24] Video_Hflip = 1
- g_stConfigTable[25] Video_Vflip = 1
- g_stConfigTable[26] Video_Rate = 90
- g_stConfigTable[27] Video_Sample = 10
- g_stConfigTable[28] Video_OSD = 1
- g_stConfigTable[29] Audio_Channel = 1
- g_stConfigTable[30] Audio_Sample = 8000
- g_stConfigTable[31] Audio_Volume = 1
- g_stConfigTable[32] Device_State = u
- g_stConfigTable[33] Config_Version =
- g_stConfigTable[34] HW_Version =
- g_stConfigTable[35] SW_Version =
- g_stConfigTable[36] Server_URL = apicn.hualaikeji.com
- g_stConfigTable[37] P2p_UID =
- g_stConfigTable[38] Camera_Type = iSC5C1
- g_stConfigTable[39] Camera_Mqtt_Server = bzycn.ismartalarm.com
- g_stConfigTable[40] Camera_UID = YHH3LWJYU9PF6621111A
- g_stConfigTable[41] Camera_AP_Key =
- g_stConfigTable[42] Camera_AP_Station = 0
- g_stConfigTable[43] Camera_following = 0
- g_stConfigTable[44] Camera_set_cruise = 0
- g_stConfigTable[45] Camera_control_cruise = 0
- g_stConfigTable[46] motor_sleep_move = 0
- g_stConfigTable[47] Camera_following_sensivity = 0
- g_stConfigTable[48] Motor_Origin_Positision = 1227,215
- g_stConfigTable[49] Xiaomi_Server_Str =
- g_stConfigTable[50] usb_enable_value = 1
- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@the NETRELATED_MAC is 44237C4CA8CE44237C4CA8CEB01C0017@@@@@@@@@@@@@@@@@@@@@@
- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@the NETRELATED_IP is w4a5NFLGsoeVre67e6o6pfgLGCanvhejlZ/aF482aSokv3f5+fzjl3ePq9SbYm8VaRpDZSUtr2MwkkVB5zVWPL6sl50waXzSL2gXV3AGt/4Ni58c4ObxgczL0jJ1vnFC1DvE9WGX2Qz30GfiWBmIzS3/Be9hQFMMdqmsQakw5x0=AQAB00003f9f@@@@@@@@@@@@@@@@@@@@@@
- INIT App INFO uXXXXXXXXXXXXXXXXXXXXXXXXXX
- uuuuuuuuuuuuuuuuuuuuu000
- /etc/app/test_UP /etc/app/test_UP /etc/app/test_UP START START
- child_process.c,401:++++++++++++++++++++++++++++++1
- video.c,98:Come Create Video Capture Thread!
- current thread stack size:8388608
- set thread stack size:1048576
- 1928074480
- ======Thread:[VC_video_thread],Stack Size:[524288]======
- current thread stack size:8388608
- set thread stack size:1048576
- 1927025904
- ======Thread:[VC_video_code_thread],Stack Size:[524288]======
- child_process.c,403:++++++++++++++++++++++++++++++1
- child_process.c,407:++++++++++++++++++++++++++++++3
- current thread stack size:8388608
- set thread stack size:1048576
- 1925977328
- ======Thread:[AudioAlarmMain],Stack Size:[524288]======
- child_process.c,409:++++++++++++++++++++++++++++++3
- child_process.c,413:++++++++++++++++++++++++++++++4
- current thread stack size:8388608
- set thread stack size:1048576
- 1924928752
- ======Thread:[VideoAlarm_Thread],Stack Size:[524288]======
- child_process.c,415:++++++++++++++++++++++++++++++4
- ======Thread:[VideoAlarm_Thread],Heap Size:[1014]======
- [GUOZHIXIN]audio_alarm_para_init 2364
- FUNC VC_video_thread, line is 215, thread start time is 1476115202
- video.c,217:Come Start Video Capture Thread! Main loop========================
- [GUOZHIXIN]VC_video_thread 1000
- ======Thread:[VC_video_thread],Heap Size:[1000]======
- VC_thread_init 396088
- FUNC VC_video_thread, line is 236, thread init end time is 1476115202
- [ 11.200908] codec_set_device: set device: speaker...
- test_UP plant form [guoke]
- sonix test!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- g_nMsgQueueIdg_nMsgQueueIdg_nMsgQueueId = 65538
- 2005292288
- ./test_UP.c,1411:test_UP_init
- ./test_UP.c,1414:TaskPool=4c4098
- WDIOC_SETTIMEOUT 0
- WDIOS_ENABLECARD 0
- WDIOC_KEEPALIVE 0
- msg_queue_rcv time: 57FBBB02, id: 65538, type: 7632, cmd: 4567
- ./shellcall.c,100:Reciving cmd message.
- child_process.c,432:++++++++++++++++++++++++++++++2
- ======Thread:[AC_audio_thread],Stack Size:[524288]======
- current thread stack size:8388608
- set thread stack size:1048576
- 1915143408
- child_process.c,434:++++++++++++++++++++++++++++++2
- child_process.c,438:++++++++++++++++++++++++++++++6
- current thread stack size:8388608
- set thread stack size:1048576
- 1914094832
- child_process.c,440:++++++++++++++++++++++++++++++6
- child_process.c,444:++++++++++++++++++++++++++++++7
- current thread stack size:8388608
- set thread stack size:1048576
- 1913046256
- ======Thread:[networkset_thread],Stack Size:[524288]======
- child_process.c,446:++++++++++++++++++++++++++++++7
- child_process.c,450:++++++++++++++++++++++++++++++8
- current thread stack size:8388608
- set thread stack size:1048576
- 1911997680
- ======Thread:[NewsChannel_threadRun],Stack Size:[524288]======
- child_process.c,453:++++++++++++++++++++++++++++++8
- child_process.c,463:++++++++++++++++++++++++++++++11
- current thread stack size:8388608
- set thread stack size:1048576
- 1910949104
- child_process.c,465:++++++++++++++++++++++++++++++11
- child_process.c,475:++++++++++++++++++++++++++++++15
- current thread stack size:8388608
- set thread stack size:1048576
- 1909900528
- child_process.c,477:++++++++++++++++++++++++++++++15
- child_process.c,487:++++++++++++++++++++++++++++++18
- current thread stack size:8388608
- set thread stack size:1048576
- NewsChannel.c,128:NewsChannel thread start success
- ======Thread:[udpServer_threadRun],Heap Size:[2364]======
- ======Thread:[NewsChannel_threadRun],Heap Size:[1356]======
- [GUOZHIXIN]ioctl_thread 1032
- [GUOZHIXIN]cloud_thread_init 8400
- g_pstCloudInfo->threadMsgId = 131076
- g_pstCloudInfo->processMsgId = 98307
- g_pstCloudInfo->acServerDomainAddr = apicn.hualaikeji.com
- networkset.c,695:[GUOZHIXIN]networkset_thread 2056
- ======Thread:[networkset_thread],Heap Size:[2056]======
- networkset.c,719:network init ok, creat check thread ok
- [GUOZHIXIN]udpServer_init 2620
- [GUOZHIXIN]AC_thread_init 8536
- get_config_item_value(CONFIG_LIGHT_NIGHT y
- ==================================jiabo_ioctl_ircut_on=============================
- 1908851952
- current thread stack size:8388608
- set thread stack size:1048576
- 1907803376
- child_process.c,489:++++++++++++++++++++++++++++++18
- child_process.c,499:++++++++++++++++++++++++++++++20
- ======Thread:[G711_encode_thread],Stack Size:[524288]======
- current thread stack size:8388608
- set thread stack size:1048576
- 1906754800
- child_process.c,501:++++++++++++++++++++++++++++++20
- child_process.c,508:++++++++++++++++++++++++++++++22
- ======Thread:[user_server_register_thread],Stack Size:[524288]======
- current thread stack size:8388608
- set thread stack size:1048576
- 1905706224
- child_process.c,510:++++++++++++++++++++++++++++++22
- send_msg_to_local_storage_set_state
- Alarm_set_load_File
- current thread stack size:8388608
- set thread stack size:1048576
- 1904657648
- ======Thread:[xiaomi_thread],Stack Size:[524288]======
- current thread stack size:8388608
- set thread stack size:1048576
- 1903609072
- ======Thread:[samba_storage_thread],Stack Size:[524288]======
- current thread stack size:8388608
- set thread stack size:1048576
- 1902560496
- ======Thread:[cc_func_run_thread],Stack Size:[524288]======
- child_process.c,545:++++++++++++++++++++++++++++++14
- current thread stack size:8388608
- set thread stack size:1048576
- 1901511920
- current thread stack size:8388608
- set thread stack size:1048576
- 1900463344
- ======Thread:[usbapp_thread],Stack Size:[524288]======
- child_process.c,548:++++++++++++++++++++++++++++++14
- child_process.c,371:child_process_init: success
- child_process.c,224:child process synchronization start, time is 1476115203
- NewsChannel_usrInfoClear: success
- NewsChannel.c,237:NewsChannel initialize success
- [GUOZHIXIN]NewsChannel_threadRun 1356
- NewsChannel.c,147:NewsChannel thread synchronization start
- cloud init ok okok okok okok okok ok
- ======Thread:[G711_encode_thread],Heap Size:[1024]======
- CC THREAD START
- [GUOZHIXIN]user_control_module_init 424
- current thread stack size:8388608
- set thread stack size:1048576
- XIAOMI_THREAD get Str 44237C4CA8CE|284405015|2IZnNfqPsdSSdcHh|2988
- [GUOZHIXIN]local_storage_module_init 6024392
- record_ini.c,607:======init_SD_static======
- record_ini.c,609:======init_SD_static======
- =============================jiabo_ioctl_ircut_off===========================
- 44237C4CA8CE
- 284405015
- 2IZnNfqPsdSSdcHh
- 2988
- get valid flag = 0
- 1899414768
- record_ini.c,612:======init_SD_static======
- record_ini.c,614:======init_SD_static======
- get the time zone is -8,timezonemin is 0
- record_ini.c,616:record_ini.c,616:========tzmin=[480]========
- record_ini.c,618:======init_SD_static======
- record_ini.c,622:******* sd_ready 0, sd_long 1 timezone_min 28800********
- record_ini.c,623:******* sd_ready 0, sd_long 1 timezone_min 28800********
- get_config_item_value(CONFIG_LIGHT_NIGHT y
- [samba] set time 0, 8
- [samba] set time 1, 17
- [samba] set time 2, 25
- [samba] set time 3, 25
- stLocalStorage.threadMsgIdstLocalStorage.threadMsgIdstLocalStorage.threadMsgId = 131076
- record_ini.c,607:======init_SD_static======
- record_ini.c,609:======init_SD_static======
- record_ini.c,612:======init_SD_static======
- record_ini.c,614:======init_SD_static======
- get the time zone is -8,timezonemin is 0
- record_ini.c,616:record_ini.c,616:========tzmin=[480]========
- record_ini.c,618:======init_SD_static======
- record_ini.c,622:******* sd_ready 0, sd_long 1 timezone_min 28800********
- record_ini.c,623:******* sd_ready 0, sd_long 1 timezone_min 28800********
- IOTC_Initialize2 success
- ????????????????????????????IOTC_Get_Version 50331950 ??????????????????????????
- current thread stack size:8388608
- set thread stack size:1048576
- 1875031280
- current thread stack size:8388608
- set thread stack size:1048576
- 1873982704
- current thread stack size:8388608
- set thread stack size:1048576
- 1872934128
- current thread stack size:8388608
- set thread stack size:1048576
- 1871885552
- current thread stack size:8388608
- set thread stack size:1048576
- 1870836976
- current thread stack size:8388608
- set thread stack size:1048576
- 1869788400
- local_storage.c,410:local_storage_thread ok
- [GUOZHIXIN]G711_encode_thread
- udpServer.c,162:Udp Server start success
- ioctl.c,659:io module sync ok
- NewsChannel.c,149:NewsChannel thread synchronization stop
- FUNC VC_video_thread, line is 238, thread sync after time is 1476115204
- common.c,467:sys_popen se[ 13.459151] set sensor gpio as PA-low-10bit
- nd cmd: 01mdev -s
- send msg sendcmd_to_fatherpipe TEST_UP_OPEN_POPEN_APP
- child_process.c,729:++++++++++++++++++++++++++++++++child_process_synchronization ok++++++++++++++++++++++++
- child_process.c,226:child process synchronization end, time is 1476115204
- common_func.c,685:acTmpBuf = y, lTmpLen = 1
- msg_queue_rcv time: 57FBBB04, id: 65538, type: 20010, cmd: 2009
- [test_UP]*N:rcv cmd :(null)
- [test_UP] 01mdev -s
- read buf 22 ISA_VERSION=5.6.2.77
- write buf ISA_VERSION=5.6.2.77
- 21
- sample_system_init info: name is jxf23, i2c addr is 64
- [ 13.629842] jxf23 0-0040: jxf23 chip found @ 0x40 (i2c0)
- [ 13.640939] tx_isp: Registered sensor subdevice jxf23 0-0040
- [derek]blk_mmc_device_try_mount_handler:acTmpBuf : /dev/mmcblk0p1
- [derek]blk_mmc_device_try_mount_handler:Step 1 read: /dev/mmcblk0p1: LABEL="fangfat" UUID="94EB-4417" TYPE="vfat"
- [SD] Step1 nFilesysType is 1
- [SD] Step2 /media/mmcblk0p1 not exist, create it
- [ 14.045634] ###### image_tuning_v4l2_open 4219 #######
- the org sensor fps_num is 15, fps_den is 1
- i264e[info]: profile Main, level 4.0
- IMP_Encoder_SetMbRC_ENABLE!!!
- i264e[info]: profile Main, level 2.2
- ******sample_framesource_streamon test to enable frame channel i[ 14.130770] &&& chan1 scaler.max_width = 1920 max_height = 1080 min_width = 128 min_height = 128 &&&
- s 0***********
- [chn0] scaler->outwidth = 1920 scaler->outheight = 1080, sscaler[ 14.150417] &&& chan2 scaler.max_width = 800 max_height = 800 min_width = 128 min_height = 128 &&&
- .outwidth = 1920 sscaler.outheight = 1080
- ******sample_framesource_streamon test to enable frame channel is 1***********
- [chn1] scaler->outwidth = 640 scaler->outheight = 360, sscaler.outwidth = 640 sscaler.outheight = 360
- ------------------IMP_Encoder_StartRecvPic 0 -------------------
- ------------------IMP_Encoder_StartRecvPic 1 -------------------
- (((((((((((((((((jiabo_OSD_VC_OSD_set 0 1 )))))))))))))))))))
- video.c,241:-----------------------------Video After Sync!!
- video.c,245:-----------------------------Video After begin!!
- *********************************video_channel[].resolution**** 7 *********************
- @@@@@@@@@@@@@@@Apps set the bitrate is 720@@@@@@@@@@@@@@
- ******stop_framesource_channel test to disable frame channel is 0***********
- [MOUNT CMD] mount -t vfat -o utf8, /dev/mmcblk0p1 /media/mmcblk0p1
- [derek]mount return msg:0
- [derek]test_if_device_can_use:ls -l /dev/mmcblk0p1 2>&1
- [derek]test_if_device_can_use:brw-rw---- 1 root root 179, 1 Jan 1 1970 /dev/mmcblk0p1
- :res:72
- SD can be used now ^-^
- pst->acDevMntPointpst->acDevMntPoint = /media/mmcblk0p1
- pst->acDevMntDir->acDevMntPoint = /media/mmcblk0p1/
- mmcblk_device_add_handler: ready call callback function
- block_device_insert_callback_function [/media/mmcblk0p1]
- New insert path is /media/mmcblk0p1,11111111 Insert !!!!!
- common.c,467:sys_popen send cmd: 01mount -o remount,rw /media/mmcblk0p1
- send msg sendcmd_to_fatherpipe TEST_UP_OPEN_POPEN_APP
- msg_queue_rcv time: 57FBBB06, id: 65538, type: 20010, cmd: 2009
- [test_UP]*N:rcv cmd :(nu[ 14.593861] &&& chan1 scaler.max_width = 1920 max_height = 1080 min_width = 128 min_height = 128 &&&
- ll)
- [test_UP] 01mount -o remount,rw /media/mmcblk0p1
- ############stop_framesource_channel ret is 0###############
- i264e[info]: profile Main, level 4.0
- IMP_Encoder_SetMbRC_DISABLE!!!
- ******start_framesource_channel test to enable frame channel is 0***********
- [chn0] scaler->outwidth = 1920 scaler->outheight = 1080, sscaler.outwidth = 1920 sscaler.outheight = 1080
- [ 14.800946] codec_set_device: set device: MIC...
- set safe_suppression_value 1.500000
- [remount] mount -o remount,rw /media/mmcblk0p1
- IR_CUT_STATE_CLOSE222222222222222!!!!!!!!!!!!!!!!!!!!!!!!!
- [iCamera]net_workset_msghandler:begin Cooee
- common.c,467:sys_popen send cmd: 01wpa_cli -p /var/run/wpa_supplicant -i wlan0 disconnect
- send msg sendcmd_to_fatherpipe TEST_UP_OPEN_POPEN_APP
- msg_queue_rcv time: 57FBBB06, id: 65538, type: 20010, cmd: 2009
- [test_UP]*N:rcv cmd :(null)
- [test_UP] 01wpa_cli -p /var/run/wpa_supplicant -i wlan0 disconnect
- Failed to connect to non-global ctrl_ifname: wlan0 error: No such file or directory
- =============================jiabo_ioctl_ircut_off===========================
- aecMode = 0
- dtdEnable = 1
- dtdBandNum = 4
- dtdPowThd = 21895964.000000
- dtdDxRatio = 0.100000
- safeSupression = 1.500000
- jiabo_IR_CUT CLOSE!!!!!!!!!!!!!!!!!!!!!!
- ioctl.c,515:RCV FROM SINGLE CHIP MACHINE IR_CUT CLOSE
- common.c,467:sys_popen send cmd: 01echo 1 > /proc/sys/vm/drop_caches
- send msg sendcmd_to_fatherpipe TEST_UP_OPEN_POPEN_APP
- msg_queue_rcv time: 57FBBB07, id: 65538, type: 20010, cmd: 2009
- [test_UP]*N:rcv cmd :(null)
- [test_UP] 01echo 1 > /proc/sys/vm/drop_caches
- getVersionSD /media/mmcblk0p1/version.ini /media/mmcblk0p1/FIRMWARE_660R.bin
- Dev[MMC] have free Total:/media/mmcblk0p1/, 488, Left:478
- [derek]the hotplug is 0
- common.c,467:sys_popen send cmd: 01mount -o remount,rw /media/mmcblk0p1
- send msg sendcmd_to_fatherpipe TEST_UP_OPEN_POPEN_APP
- msg_queue_rcv time: 57FBBB07, id: 65538, type: 20010, cmd: 2009
- [test_UP]*N:rcv cmd :(null)
- [test_UP] 01mount -o remount,rw /media/mmcblk0p1
- [derek]storage device change action : to mmc
- [derek]set sd_path : /media/mmcblk0p1/
- 1476115209...65.549553
- common_func.c,2044:xiaomi_client_station 0
- [auto] param cType = 1
- [auto] param cSegmentNum = 1
- [auto] param >cIfFullTime = 1
- [auto] param >cLoopType = 1
- [auto] param date = 1111111
- [AUTO] stSegInfo[0].cStartHour = 23
- [AUTO] stSegInfo[0].cStartMin = 0
- [AUTO] stSegInfo[0].usDurationTime = 1440
- [AUTO] stSegInfo[0].nTimeStamp = 1
- auto para switch = 1
- Init g_stAutoRecordInfo.cSwitch = 1
- auto para owner = 1
- Init g_stAutoRecordInfo.cOwner = 1
- auto switch_enable_time_r = 1476140399
- Init g_stAutoRecordInfo.nSwitchEnableTime = 1476140399
- g_stAutoRecordInfo.cSwitch = 1, cSwitch = 1
- new_record_long.c,1038:[AUTO] set g_nNewestSdTime = 00 1
- after reading hid device:
- hid device not found!
- usbapp.c,853:get buf add@/devices/platform/jz-i2c.0/i2c-0/0-0040
- shellcall.c,172:cmd:killall sd_poweroff_timer.sh
- ./shellcall.c,107:recvbuff=killall sd_poweroff_timer.sh
- ./shellcall.c,100:Reciving cmd message.
- ./shellcall.c,68:cmd=killall sd_poweroff_timer.sh
- usbapp.c,858:[add_device_information] is :[[add@/devices/platform/jz-i2c.0/i2c-0/0-0040]]
- killall: sd_poweroff_timer.sh: no process killed
- after reading hid device:
- hid device not found!
- root
- Password: local storage local storage local storage local storage
- local storage local storage local storage local storage
- local storage local storage local storage local storage
- local storage local storage local storage local storage
- local storage local storage local storage local storage
- msg_queue_rcvmsg_queue_rcvmsg_queue_rcvmsg_queue_rcvmsg_queue_rcvmsg_queue_rcvmsg_queue_rcv
- LS: MSG_LS_T_RECORD_STATE = 0 (0:ready 1:stop)
- VideoAlarm_Variable_Init 1014
- self->MotionSense 5
- @@@@@@@@@@@@ init_video_alarm_detection without net @@@@@@@@@@@@@@
- change_isp_md_args Video Open 1 ---------5-------
- ====== set_video_alarm_detection_value for lite move ======
- IVS Version:1.0.5 built: Jun 5 2017 08:56:06
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB0E, id: 65538, type: 7632, cmd: 4567
- get_motion_valid_timebucket_from_config:len=16 str:0,0,1440,127,300
- the timebucket protocal is :0
- -------0-------
- -------1440-------
- -------127-------
- -------300-------
- @@@@@@@@@@@@@@@@@@@@@ program version 1.2.43 @@@@@@@@@@@@@@@@@@@@@
- @@@@@@@@@@@@@@@@@ Ingenic Processing started. @@@@@@@@@@@@@@@@@@@@
- recv_Msg =13, moving_detection_flag = 1, moving_detection_sensitivity =5
- Login incorrect
- Ingenic-uc1_1 login: [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB19, id: 65538, type: 7632, cmd: 4567
- root
- Password: [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB23, id: 65538, type: 7632, cmd: 4567
- Oct 11 00:00:36 login[68]: root login on 'console'
- [root@Ingenic-uc1_1:~]# df
- Filesystem 1K-blocks Used Available Use% Mounted on
- /dev/root 3328 3328 0 100% /
- tmpfs 17700 8 17692 0% /dev
- tmpfs 17700 4 17696 0% /tmp
- tmpfs 17700 0 17700 0% /run
- media 17700 0 17700 0% /media
- /dev/mtdblock3 640 640 0 100% /driver
- /dev/mtdblock4 4736 4044 692 85% /system
- /dev/mtdblock7 2048 132 1916 6% /backupa
- /dev/mtdblock8 256 124 132 48% /configs
- /dev/mtdblock9 256 104 152 41% /params
- /dev/mmcblk0p1 500456 10832 489624 2% /media/mmcblk0p1
- [root@Ingenic-uc1_1:~]# already to 30, new audio alarm start
- 1476115240...62.732578
- common_func.c,2044:xiaomi_client_station 0
- cd /[watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB2D, id: 65538, type: 7632, cmd: 4567
- [root@Ingenic-uc1_1:~]# cd /media/mmcblk0p1/
- [root@Ingenic-uc1_1:mmcblk0p1]# ls -l
- -rwxr-xr-x 1 root root 11075648 Oct 19 2019 demo.bin
- drwxr-xr-x 2 root root 8192 Oct 11 00:00 time_lapse
- [root@Ingenic-uc1_1:mmcblk0p1]# [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB37, id: 65538, type: 7632, cmd: 4567
- [root@Ingenic-uc1_1:mmcblk0p1]#
- [root@Ingenic-uc1_1:mmcblk0p1]#
- [root@Ingenic-uc1_1:mmcblk0p1]#
- [root@Ingenic-uc1_1:mmcblk0p1]# cat /proc/mtd [NAS]samba_storage_thread_new start
- dev: size erasesize name
- mtd0: 00040000 00008000 "boot"
- mtd1: 00200000 00008000 "kernel"
- mtd2: 00350000 00008000 "root"
- mtd3: 000a0000 00008000 "driver"
- mtd4: 004a0000 00008000 "appfs"
- mtd5: 00200000 00008000 "backupk"
- mtd6: 000a0000 00008000 "backupd"
- mtd7: 00200000 00008000 "backupa"
- mtd8: 00040000 00008000 "config"
- mtd9: 00040000 00008000 "para"
- mtd10: 00010000 00008000 "flag"
- [root@Ingenic-uc1_1:mmcblk0p1]# [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB42, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- l 1476115271...73.588959
- common_func.c,2044:xiaomi_client_station 0
- s /dev/mtd*[watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB4C, id: 65538, type: 7632, cmd: 4567
- /dev/mtd0 /dev/mtd3ro /dev/mtd8 /dev/mtdblock4
- /dev/mtd0ro /dev/mtd4 /dev/mtd8ro /dev/mtdblock5
- /dev/mtd1 /dev/mtd4ro /dev/mtd9 /dev/mtdblock6
- /dev/mtd10 /dev/mtd5 /dev/mtd9ro /dev/mtdblock7
- /dev/mtd10ro /dev/mtd5ro /dev/mtdblock0 /dev/mtdblock8
- /dev/mtd1ro /dev/mtd6 /dev/mtdblock1 /dev/mtdblock9
- /dev/mtd2 /dev/mtd6ro /dev/mtdblock10
- /dev/mtd2ro /dev/mtd7 /dev/mtdblock2
- /dev/mtd3 /dev/mtd7ro /dev/mtdblock3
- [root@Ingenic-uc1_1:mmcblk0p1]# [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB56, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB60, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- 1476115302...68.369827
- common_func.c,2044:xiaomi_client_station 0
- [root@Ingenic-uc1_1:mmcblk0p1]#
- [root@Ingenic-uc1_1:mmcblk0p1]#
- [root@Ingenic-uc1_1:mmcblk0p1]# c[watchDog]send watchdog message !!!
- amsg_queue_rcv time: 57FBBB6A, id: 65538, type: 7632, cmd: 4567
- t /proc/mtd > mtd.txt
- [root@Ingenic-uc1_1:mmcblk0p1]# [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB75, id: 65538, type: 7632, cmd: 4567
- [root@Ingenic-uc1_1:mmcblk0p1]# for i in 0 1 2 3 4 5 6 7 8 9[watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB7F, id: 65538, type: 7632, cmd: 4567
- 10already to 30, new audio alarm start
- 1476115333...71.059036
- common_func.c,2044:xiaomi_client_station 0
- > do dd if[watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB89, id: 65538, type: 7632, cmd: 4567
- =/dev/mtd$i of=[watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB93, id: 65538, type: 7632, cmd: 4567
- mtd$i [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBB9E, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- 1476115365...64.672401
- common_func.c,2044:xiaomi_client_station 0
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBA8, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBB2, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBBC, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- 1476115396...64.083122
- common_func.c,2044:xiaomi_client_station 0
- > [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBC6, id: 65538, type: 7632, cmd: 4567
- done
- 512+0 records in
- 512+0 records out
- 262144 bytes (256.0KB) copied, 5.428895 seconds, 47.2KB/s
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBD1, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBDB, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- 1476115427...62.752987
- common_func.c,2044:xiaomi_client_station 0
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBE5, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBEF, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBBF9, id: 65538, type: 7632, cmd: 4567
- 4096+0 records in
- 4096+0 records out
- 2097152 bytes (2.0MB) copied, 41.980786 seconds, 48.8KB/s
- already to 30, new audio alarm start
- 1476115458...62.072342
- common_func.c,2044:xiaomi_client_station 0
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC04, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC0E, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC18, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- 1476115489...66.604080
- common_func.c,2044:xiaomi_client_station 0
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC22, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC2D, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC37, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- 1476115520...66.816971
- common_func.c,2044:xiaomi_client_station 0
- 6784+0 records in
- 6784+0 records out
- 3473408 bytes (3.3MB) copied, 70.089440 seconds, 48.4KB/s
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC41, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC4B, id: 65538, type: 7632, cmd: 4567
- 1280+0 records in
- 1280+0 records out
- 655360 bytes (640.0KB) copied, 13.084813 seconds, 48.9KB/s
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC55, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- 1476115551...61.928558
- common_func.c,2044:xiaomi_client_station 0
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC60, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC6A, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC74, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- 1476115582...62.231735
- common_func.c,2044:xiaomi_client_station 0
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC7E, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC89, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC93, id: 65538, type: 7632, cmd: 4567
- already to 30, new audio alarm start
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBC9D, id: 65538, type: 7632, cmd: 4567
- 1476115613...63.242115
- common_func.c,2044:xiaomi_client_station 0
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBCA7, id: 65538, type: 7632, cmd: 4567
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBCB1, id: 65538, type: 7632, cmd: 4567
- 9472+0 records in
- 9472+0 records out
- 4849664 bytes (4.6MB) copied, 100.166015 seconds, 47.3KB/s
- already to 30, new audio alarm start
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBCBC, id: 65538, type: 7632, cmd: 4567
- 1476115647...70.927032
- common_func.c,2044:xiaomi_client_station 0
- [watchDog]send watchdog message !!!
- msg_queue_rcv time: 57FBBCC6, id: 65538, type: 7632, cmd: 4567
- scott@n550jk:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement