Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.2.0-00371-SDM845LZB-1
S - IMAGE_VARIANT_STRING=SDM845LA
S - OEM_IMAGE_VERSION_STRING=TSBJ-FA-PC-02170
S - Boot Interface: UFS
S - Secure Boot: Off
S - Boot Config @ 0x00786070 = 0x000000c1
S - JTAG ID @ 0x00786130 = 0x2008e0e1
S - OEM ID @ 0x00786138 = 0x00000000
S - Serial Number @ 0x00784138 = 0xa92692f1
S - OEM Config Row 0 @ 0x00784188 = 0x0000000400000000
S - OEM Config Row 1 @ 0x00784190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x007841a0 = 0x0050200080000400
S - Feature Config Row 1 @ 0x007841a8 = 0xe000ffff00007fff
S - Core 0 Frequency, 1516 MHz
S - PBL Patch Ver: 1
S - PBL freq: 600 MHZ
B -        94 - PBL, Start
B -      5276 - bootable_media_detect_entry
B -     44017 - bootable_media_detect_success
B -     44393 - elf_loader_entry
B -     45011 - auth_hash_seg_entry
B -     45211 - auth_hash_seg_exit
B -     51192 - elf_segs_hash_verify_entry
B -     57943 - elf_segs_hash_verify_exit
B -     58570 - auth_xbl_sec_hash_seg_entry
B -     65944 - auth_xbl_sec_hash_seg_exit
B -     65945 - xbl_sec_segs_hash_verify_entry
B -     66705 - xbl_sec_segs_hash_verify_exit
B -     66728 - PBL, End
B -     81984 - SBL1, Start
B -    204716 - boot_flash_init, Start
D -        30 - boot_flash_init, Delta
B -    208681 - xblconfig_init, Start
D -       518 - Auth Metadata
D -    117638 - xblconfig_init, Delta
B -    331321 - sbl1_ddr_set_default_params, Start
D -      1525 - sbl1_ddr_set_default_params, Delta
B -    339282 - boot_config_data_table_init, Start
B -    343918 - CDT not programmed, using default
D -      4544 - boot_config_data_table_init, Delta - (54 Bytes)
B -    358466 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B -    364170 - pm_device_init, Start
B -   1443778 - PM: PON REASON: PM0=0x400008000000040:0x0 PM1=0x400008000000020:0x0 PM2=0x400008000000020:0x0
B -   1503985 - PM: SET_VAL:Skip
D -   1140334 - pm_device_init, Delta
B -   1506974 - pm_driver_init, Start
D -      5337 - pm_driver_init, Delta
B -   1515850 - PM: Trigger FG IMA Reset
B -   1519388 - PM: Trigger FG IMA Reset.Completed
B -   1528568 - PM: EntryVbat: 4257; EntrySOC: -1
B -   1528599 - PM: ADSP result: 8
B -   1533082 - PM: APSD in progress
B -   1536285 - PM: BATT TEMP: 25 DegC
B -   1539762 - vsense_init, Start
D -         0 - vsense_init, Delta
B -   1577399 - sbl1_ddr_set_params, Start
B -   1579534 - Pre_DDR_clock_init, Start
D -        61 - Pre_DDR_clock_init, Delta
D -      7686 - sbl1_ddr_set_params, Delta
B -   1588806 - sbl1_ddr_init, Start
D -     16104 - sbl1_ddr_init, Delta
B -   1608783 - DSF version = 253.10, DSF SHRM version = 173.3
B -   1612108 - Manufacturer ID = 6, Device Type = 7
B -   1617720 - Rank 0 size = 4096 MB, Rank 1 size = 0 MB
B -   1622661 - do_ddr_training, Start
B -   1629249 - Frequency = 1355 MHz
D -      3599 - do_ddr_training, Delta
B -   1637728 - pImem Init Start
D -      9729 - pImem Init End, Delta
B -   1649318 - clock_init, Start
D -       213 - clock_init, Delta
B -   1654289 - Image Load, Start
D -      2959 - APDP Image Loaded, Delta - (0 Bytes)
B -   1660450 - usb: UFS Serial - 2d721364
B -   1665056 - usb: fedl, vbus_low
B -   1669448 - PM: 0: PON=0x40:CBLPWR_N: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
B -   1677805 - PM: 1: PON=0x20:PON1: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
B -   1684911 - PM: 2: PON=0x20:PON1: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
B -   1691621 - PM: SMEM Chgr Info Write Success
B -   1697813 - Image Load, Start
D -       396 - Auth Metadata
D -     10065 - Segments hash check
D -     20343 - AOP Image Loaded, Delta - (178808 Bytes)
B -   1721420 - Image Load, Start
D -       366 - Auth Metadata
D -       305 - Segments hash check
D -     10858 - QSEE Dev Config Image Loaded, Delta - (33720 Bytes)
B -   1741123 - Image Load, Start
D -      3812 - Auth Metadata
D -     11377 - Segments hash check
D -     36295 - QSEE Image Loaded, Delta - (2035952 Bytes)
B -   1780681 - Image Load, Start
D -       274 - SEC Image Loaded, Delta - (4096 Bytes)
B -   1789069 - Image Load, Start
D -       366 - Auth Metadata
D -      2379 - Segments hash check
D -     17293 - QHEE Image Loaded, Delta - (380480 Bytes)
B -   1809717 - Image Load, Start
D -      5033 - STI Image Loaded, Delta - (0 Bytes)
B -   1818044 - Image Load, Start
D -       397 - Auth Metadata
D -       732 - Segments hash check
D -     10217 - ABL Image Loaded, Delta - (146000 Bytes)
B -   1831616 - Image Load, Start
D -       488 - Auth Metadata
D -      9181 - Segments hash check
D -     33032 - APPSBL Image Loaded, Delta - (2097152 Bytes)
B -   1905121 - SBL1, End
D -   1823168 - SBL1, Delta
S - Flash Throughput, 114000 KB/s  (4948646 Bytes,  43055 us)
S - DDR Frequency, 1353 MHz


UEFI Start     [ 2249] SEC
ASLR        : On
DEP         : On
Timer Delta : +1 mS
RAM Entry 0 : Base 0x0000000080000000  Size 0x00000000FDFA0000
UEFI Ver    : 5.0.190528.BOOT.XF.2.0-00371-SDM845LZB-1
Build Info  : 64b May 28 2019 11:21:44
Boot Device : UFS
PROD Mode   : TRUE
Retail      : TRUE
PM0: 20, PM1: 21, PM2: 24,
Panel override command: < none>
DisplayDxe: SW renderer mode enabled!
DisplayDxe: Resolution 640x480 (1 intf)
Render Splash  [ 2521]
-----------------------------
Platform Init  [ 2588] BDS
Platform   : MTP
Chip Name  : SDA845
Chip Ver   : 2.1
Core 0 Freq: 1612 MHz
-----------------------------
UEFI Total : 1172 ms
POST Time      [ 3421] OS Loader
Loader Build Info: Jun 27 2019 20:17:34
VB: RWDeviceState: Succeed using devinfo!
Launching fastboot
Fastboot Build Info: Jun 27 2019 20:17:33
qusb2_1: hstx: 7
PLL1 locked: 5
usb_lane: 0
Fastboot: Initializing...
Fastboot: Processing commands
qusb2_1: hstx: 7
PLL1 locked: 5
usb_lane: 0
Handling Cmd: download:008dc800
Download Finished
Handling Cmd: boot
Loading Image Start : 11183 ms
No dtbo partition is found, Skip dtbo
Exit key detection timer
No Ffbm cookie found, ignore: Not Found
Memory Base Address: 0x80000000
Decompressing kernel image start: 11205 ms
Decompressing kernel image done: 18566 ms
BootLinux: failed to get dtbo image
DTB offset is incorrect, kernel image does not have appended DTB
RAM Partitions
Add Base: 0x0000000080000000 Available Length: 0x00000000FDFA0000
WARNING: Could not find mem-offline node.
ERROR: Could not get splash memory region node
kaslr-Seed is added to chosen node

Shutting Down UEFI Boot Services: 18577 ms
BDS: LogFs sync skipped, Unsupported
App Log Flush : 26 ms
Exit BS        [18761] UEFI End
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
[    0.000000] Linux version 5.3.0-rc1-dirty (tharagopinath@Thara-Work-Ubuntu) (gcc version 6.5.0 (Linaro GCC 6.5-2018.12)) #4 SMP Tue Jul 23 10:22:17 EDT 2019
[    0.000000] Machine model: Thundercomm Dragonboard 845c
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017df9ffff]
[    0.000000] NUMA: NODE_DATA [mem 0x17d7d4840-0x17d7d5fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017df9ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000856fffff]
[    0.000000]   node   0: [mem 0x0000000085d00000-0x0000000085dfffff]
[    0.000000]   node   0: [mem 0x0000000085f00000-0x0000000085fbffff]
[    0.000000]   node   0: [mem 0x0000000089100000-0x000000008aafffff]
[    0.000000]   node   0: [mem 0x000000008c417000-0x000000008c4fffff]
[    0.000000]   node   0: [mem 0x0000000097c00000-0x000000017df9ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 512 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017df9ffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 23 pages/cpu s56472 r8192 d29544 u94208
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 957419
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda1 rw console=tty0 console=ttyMSM0,115200n8
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0xfa000000-0xfe000000] (64MB)
[    0.000000] Memory: 3685696K/3890468K available (11708K kernel code, 1790K rwdata, 6008K rodata, 5376K init, 448K bss, 172004K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x490 with crng_init=0
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000447] Console: colour dummy device 80x25
[    0.000737] printk: console [tty0] enabled
[    0.000909] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.000928] pid_max: default: 32768 minimum: 301
[    0.001044] LSM: Security Framework initializing
[    0.001160] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.001184] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.004019] ASID allocator initialised with 32768 entries
[    0.004122] rcu: Hierarchical SRCU implementation.
[    0.006349] EFI services will not be available.
[    0.006731] smp: Bringing up secondary CPUs ...
[    0.008794] Detected VIPT I-cache on CPU1
[    0.008900] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[    0.008989] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
[    0.010730] Detected VIPT I-cache on CPU2
[    0.010758] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
[    0.010806] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
[    0.012583] Detected VIPT I-cache on CPU3
[    0.012608] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
[    0.012655] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
[    0.015125] Detected VIPT I-cache on CPU4
[    0.015154] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[    0.015200] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
[    0.017470] Detected VIPT I-cache on CPU5
[    0.017500] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
[    0.017546] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
[    0.019945] Detected VIPT I-cache on CPU6
[    0.019975] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
[    0.020022] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
[    0.022601] Detected VIPT I-cache on CPU7
[    0.022633] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
[    0.022680] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
[    0.022770] smp: Brought up 1 node, 8 CPUs
[    0.022869] SMP: Total of 8 processors activated.
[    0.022879] CPU features: detected: Privileged Access Never
[    0.022884] CPU features: detected: LSE atomic instructions
[    0.022891] CPU features: detected: User Access Override
[    0.022898] CPU features: detected: 32-bit EL0 Support
[    0.022904] CPU features: detected: Common not Private translations
[    0.022912] CPU features: detected: RAS Extension Support
[    0.022919] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022928] CPU features: detected: CRC32 instructions
[    0.024411] CPU: All CPU(s) started at EL1
[    0.024458] alternatives: patching kernel code
[    0.045034] devtmpfs: initialized
[    0.056909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.056955] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.058564] pinctrl core: initialized pinctrl subsystem
[    0.060421] DMI not present or invalid.
[    0.061066] NET: Registered protocol family 16
[    0.061738] audit: initializing netlink subsys (disabled)
[    0.061958] audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1
[    0.063401] cpuidle: using governor menu
[    0.063795] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.064782] DMA: preallocated 256 KiB pool for atomic allocations
[    0.066094] Serial: AMBA PL011 UART driver
[    0.088137] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.088155] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.088164] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.088173] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.090619] cryptd: max_cpu_qlen set to 1000
[    0.095165] ACPI: Interpreter disabled.
[    0.107710] VBAT: supplied by DC12V
[    0.107963] VBAT_SOM: supplied by DC12V
[    0.108139] PCIE0_1.05V: supplied by VBAT
[    0.108186] VLDO_3V3: supplied by VBAT
[    0.108297] VDC_3V3: supplied by DC12V
[    0.108548] VDC_5V: supplied by DC12V
[    0.108719] LT9611_3V3: supplied by VDC_3V3
[    0.108930] LT9611_1V8: supplied by VDC_5V
[    0.108981] V5P0_HDMIOUT: supplied by VDC_5V
[    0.109082] vph_pwr: supplied by VBAT_SOM
[    0.109988] vgaarb: loaded
[    0.110346] SCSI subsystem initialized
[    0.110729] usbcore: registered new interface driver usbfs
[    0.110766] usbcore: registered new interface driver hub
[    0.110822] usbcore: registered new device driver usb
[    0.111389] pps_core: LinuxPPS API ver. 1 registered
[    0.111399] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.111419] PTP clock support registered
[    0.111523] EDAC MC: Ver: 3.0.0
[    0.112944] FPGA manager framework
[    0.113022] Advanced Linux Sound Architecture Driver Initialized.
[    0.114039] clocksource: Switched to clocksource arch_sys_counter
[    0.114186] VFS: Disk quotas dquot_6.6.0
[    0.114264] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.114455] pnp: PnP ACPI: disabled
[    0.119032] thermal_sys: Registered thermal governor 'step_wise'
[    0.119037] thermal_sys: Registered thermal governor 'power_allocator'
[    0.121155] NET: Registered protocol family 2
[    0.121602] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.121661] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.121845] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.122255] TCP: Hash tables configured (established 32768 bind 32768)
[    0.122426] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.122517] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.122790] NET: Registered protocol family 1
[    0.123387] RPC: Registered named UNIX socket transport module.
[    0.123397] RPC: Registered udp transport module.
[    0.123406] RPC: Registered tcp transport module.
[    0.123413] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.123433] PCI: CLS 0 bytes, default 64
[    0.123688] Unpacking initramfs...
[    0.123712] Initramfs unpacking failed: invalid magic at start of compressed archive
[    0.125127] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.125399] kvm [1]: HYP mode not available
[    0.132299] Initialise system trusted keyrings
[    0.132483] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    0.137105] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.137689] NFS: Registering the id_resolver key type
[    0.137732] Key type id_resolver registered
[    0.137741] Key type id_legacy registered
[    0.137764] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.137906] 9p: Installing v9fs 9p2000 file system support
[    0.150779] Key type asymmetric registered
[    0.150794] Asymmetric key parser 'x509' registered
[    0.150839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.150857] io scheduler mq-deadline registered
[    0.150866] io scheduler kyber registered
[    0.159665] EINJ: ACPI disabled.
[    2.195312] smps3: supplied by vph_pwr
[    2.195412] smps3: Setting 1352000-1352000uV
[    2.195642] smps5: supplied by vph_pwr
[    2.195716] smps5: Setting 1904000-2040000uV
[    2.195855] smps7: supplied by vph_pwr
[    2.195898] smps7: Setting 900000-1028000uV
[    2.196024] ldo1: supplied by smps7
[    2.196063] ldo1: Setting 880000-880000uV
[    2.196263] ldo5: supplied by smps7
[    2.196332] ldo5: Setting 800000-800000uV
[    2.196496] ldo12: supplied by smps5
[    2.196536] ldo12: Setting 1800000-1800000uV
[    2.196695] ldo7: supplied by smps5
[    2.196730] ldo7: Setting 1800000-1800000uV
[    2.196895] ldo13: Setting 1800000-2960000uV
[    2.197084] ldo17: supplied by smps3
[    2.197124] ldo17: Setting 1304000-1304000uV
[    2.197306] ldo20: Setting 2960000-2968000uV
[    2.197521] ldo21: Setting 2960000-2968000uV
[    2.197700] ldo24: Setting 3088000-3088000uV
[    2.197878] ldo25: Setting 3300000-3312000uV
[    2.198073] ldo26: supplied by smps3
[    2.198134] ldo26: Setting 1200000-1200000uV
[    2.198376] bob: supplied by vph_pwr
[    2.198417] bob: Setting 3312000-3600000uV
[    2.202167] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.204090] SuperH (H)SCI(F) driver initialized
[    2.204577] msm_serial: driver initialized
[    2.204969] 898000.serial: ttyHS0 at MMIO 0x898000 (irq = 122, base_baud = 0) is a MSM
[    2.205233] serial serial0: tty port ttyHS0 registered
[    2.205406] a84000.serial: ttyMSM0 at MMIO 0xa84000 (irq = 123, base_baud = 0) is a MSM
[    3.359192] printk: console [ttyMSM0] enabled
[    3.364948] arm-smmu 15000000.iommu: probing hardware configuration...
[    3.371578] arm-smmu 15000000.iommu: SMMUv2 with:
[    3.376418] arm-smmu 15000000.iommu: 	stage 1 translation
[    3.381879] arm-smmu 15000000.iommu: 	non-coherent table walk
[    3.387686] arm-smmu 15000000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[    3.395152] arm-smmu 15000000.iommu: 	stream matching with 76 register groups
[    3.402403] arm-smmu 15000000.iommu: 	45 context banks (0 stage-2 only)
[    3.409119] arm-smmu 15000000.iommu: 	Supported page sizes: 0x61311000
[    3.415715] arm-smmu 15000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
[    3.445312] loop: module loaded
[    3.452334] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[    3.467741] libphy: Fixed MDIO Bus: probed
[    3.472133] tun: Universal TUN/TAP device driver, 1.6
[    3.478002] thunder_xcv, ver 1.0
[    3.481313] thunder_bgx, ver 1.0
[    3.484606] nicpf, ver 1.0
[    3.487879] hclge is initializing
[    3.491249] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    3.498538] hns3: Copyright (c) 2017 Huawei Corporation.
[    3.503953] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.509849] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.515860] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    3.522892] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.528553] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    3.536460] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    3.542705] sky2: driver version 1.30
[    3.547023] VFIO - User Level meta-driver version: 0.3
[    3.555847] dwc3 a600000.dwc3: Adding to iommu group 0
[    3.561337] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[    3.569898] dwc3 a800000.dwc3: Adding to iommu group 1
[    3.575337] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[    3.581956] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.588554] ehci-pci: EHCI PCI platform driver
[    3.593074] ehci-platform: EHCI generic platform driver
[    3.598471] ehci-orion: EHCI orion driver
[    3.602602] ehci-exynos: EHCI EXYNOS driver
[    3.606914] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.613181] ohci-pci: OHCI PCI platform driver
[    3.617711] ohci-platform: OHCI generic platform driver
[    3.623087] ohci-exynos: OHCI EXYNOS driver
[    3.627790] usbcore: registered new interface driver usb-storage
[    3.636241] i2c /dev entries driver
[    3.647671] sdhci: Secure Digital Host Controller Interface driver
[    3.653923] sdhci: Copyright(c) Pierre Ossman
[    3.658695] Synopsys Designware Multimedia Card Interface Driver
[    3.665566] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.672591] sdhci_msm 8804000.sdhci: Adding to iommu group 2
[    3.678633] sdhci_msm 8804000.sdhci: Got CD GPIO
[    3.683474] sdhci_msm 8804000.sdhci: TCXO clk not present (-2)
[    3.689644] ldo21: supplied by bob
[    3.693238] ldo13: supplied by bob
[    3.737193] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using ADMA 64-bit
[    3.752973] ledtrig-cpu: registered to indicate activity on CPUs
[    3.760221] usbcore: registered new interface driver usbhid
[    3.765862] usbhid: USB HID core driver
[    3.774635] NET: Registered protocol family 17
[    3.779384] 9pnet: Installing 9P2000 support
[    3.783795] Key type dns_resolver registered
[    3.791226] registered taskstats version 1
[    3.795382] Loading compiled-in X.509 certificates
[    3.813455] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[    3.820888] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[    3.828542] arm-smmu 5040000.iommu: ignoring dependency for device, assuming no driver
[    3.838394] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[    3.845544] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[    3.854962] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    3.862458] ------------[ cut here ]------------
[    3.863071] hctosys: unable to open rtc device (rtc0)
[    3.867130] hlos1_vote_aggre_noc_mmu_tbu2_gdsc status stuck at 'on'
[    3.867213] WARNING: CPU: 5 PID: 185 at drivers/clk/qcom/gdsc.c:145 gdsc_toggle_logic+0xe0/0xe8
[    3.873699] ldo20: supplied by bob
[    3.878577] Modules linked in:
[    3.878595] CPU: 5 PID: 185 Comm: kworker/5:1 Not tainted 5.3.0-rc1-dirty #4
[    3.887462] ldo24: supplied by bob
[    3.890795] Hardware name: Thundercomm Dragonboard 845c (DT)
[    3.890822] Workqueue: pm genpd_power_off_work_fn
[    3.893961] ldo25: supplied by bob
[    3.900997] pstate: 60c00005 (nZCv daif +PAN +UAO)
[    3.901002] pc : gdsc_toggle_logic+0xe0/0xe8
[    3.901007] lr : gdsc_toggle_logic+0xe0/0xe8
[    3.904492] LT9611_1V8: disabling
[    3.910158] sp : ffff000010d4bce0
[    3.910161] x29: ffff000010d4bce0 x28: 0000000000000000
[    3.914918] LT9611_3V3: disabling
[    3.918349] x27: ffff0000102bbcc8 x26: ffffbfdcfd7964c0
[    3.918353] x25: 0000000000000000 x24: ffff328709a16530
[    3.923203] PCIE0_1.05V: disabling
[    3.927509] x23: 0000000000000000 x22: 0000000000000000
[    3.927512] x21: 0000000000000000 x20: 00000000ffffff92
[    3.931836] VLDO_3V3: disabling
[    3.935176] x19: ffff328709a16148 x18: ffffffffffffffff
[    3.935180] x17: 0000000000000000 x16: 0000000000000000
[    3.938537] V5P0_HDMIOUT: disabling
[    3.943883] x15: ffff3287099296c8 x14: 0720072007200720
[    3.943886] x13: 0720072007200720 x12: 0720072007200720
[    3.943892] x11: 0720072007200720 x10: 0720072007200720
[    3.947271] smps3: disabling
[    3.952602] x9 : 0720072007200720 x8 : 206b637574732073
[    3.952605] x7 : 7574617473206373 x6 : ffff328709af65f7
[    3.958615] smps5: disabling
[    3.958921] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[    3.959739] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[    3.961410] x5 : 0000000000000000 x4 : 0000000000000000
[    3.967487] smps7: disabling
[    3.972138] x3 : 0000000000000027 x2 : 00000000ffffffff
[    3.972141] x1 : 0d79790fa16c0600 x0 : 0000000000000000
[    3.972146] Call trace:
[    3.972152]  gdsc_toggle_logic+0xe0/0xe8
[    3.972155]  gdsc_disable+0x74/0x158
[    3.972161]  genpd_power_off+0x108/0x248
[    3.976004] ldo1: disabling
[    3.980701]  genpd_power_off_work_fn+0x30/0x50
[    3.980715]  process_one_work+0x1f4/0x358
[    3.980720]  worker_thread+0x50/0x498
[    3.986771] ldo5: disabling
[    3.989611]  kthread+0xf4/0x120
[    3.989626]  ret_from_fork+0x10/0x18
[    3.995626] ldo12: disabling
[    4.000343] ---[ end trace 91fca302c1bf7f5c ]---
[    4.000866] ------------[ cut here ]------------
[    4.006403] ldo7: disabling
[    4.008639] hlos1_vote_aggre_noc_mmu_tbu1_gdsc status stuck at 'on'
[    4.008660] WARNING: CPU: 5 PID: 185 at drivers/clk/qcom/gdsc.c:145 gdsc_toggle_logic+0xe0/0xe8
[    4.014682] ldo17: disabling
[    4.019350] Modules linked in:
[    4.019358] CPU: 5 PID: 185 Comm: kworker/5:1 Tainted: G        W         5.3.0-rc1-dirty #4
[    4.019361] Hardware name: Thundercomm Dragonboard 845c (DT)
[    4.019367] Workqueue: pm genpd_power_off_work_fn
[    4.022546] ldo20: disabling
[    4.027828] pstate: 60c00005 (nZCv daif +PAN +UAO)
[    4.027831] pc : gdsc_toggle_logic+0xe0/0xe8
[    4.027834] lr : gdsc_toggle_logic+0xe0/0xe8
[    4.027837] sp : ffff000010d4bce0
[    4.033623] ldo24: disabling
[    4.038730] x29: ffff000010d4bce0 x28: 0000000000000000
[    4.038734] x27: ffff0000102bbcc8 x26: ffffbfdcfd7964c0
[    4.038738] x25: 0000000000000000 x24: ffff328709a16a98
[    4.042290] ldo25: disabling
[    4.047004] x23: 0000000000000000 x22: 0000000000000000
[    4.047007] x21: 0000000000000000 x20: 00000000ffffff92
[    4.047010] x19: ffff328709a166b0 x18: ffffffffffffffff
[    4.047012] x17: 0000000000000000 x16: 0000000000000000
[    4.047015] x15: ffff3287099296c8 x14: 0720072007200720
[    4.053272] ldo26: disabling
[    4.054863] x13: 0720072007200720 x12: 0720072007200720
[    4.054866] x11: 0720072007200720 x10: 0720072007200720
[    4.054869] x9 : 0720072007200720 x8 : 206b637574732073
[    4.054872] x7 : 7574617473206373 x6 : ffff328709af65f7
[    4.054875] x5 : 0000000000000000 x4 : 0000000000000000
[    4.059490] ALSA device list:
[    4.062446] x3 : 0000000000000027 x2 : 00000000ffffffff
[    4.062449] x1 : 0d79790fa16c0600 x0 : 0000000000000000
[    4.062451] Call trace:
[    4.062454]  gdsc_toggle_logic+0xe0/0xe8
[    4.062457]  gdsc_disable+0x74/0x158
[    4.062463]  genpd_power_off+0x108/0x248
[    4.066435]   No soundcards found.
[    4.069243]  genpd_power_off_work_fn+0x30/0x50
[    4.069247]  process_one_work+0x1f4/0x358
[    4.283906]  worker_thread+0x50/0x498
[    4.283910]  kthread+0xf4/0x120
[    4.283913]  ret_from_fork+0x10/0x18
[    4.283915] ---[ end trace 91fca302c1bf7f5d ]---
[    4.284430] ------------[ cut here ]------------
[    4.295253] VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6
[    4.299444] hlos1_vote_aggre_noc_mmu_pcie_tbu_gdsc status stuck at 'on'
[    4.299460] WARNING: CPU: 5 PID: 185 at drivers/clk/qcom/gdsc.c:145 gdsc_toggle_logic+0xe0/0xe8
[    4.304118] Please append a correct "root=" boot option; here are the available partitions:
[    4.311479] Modules linked in:
[    4.311484] CPU: 5 PID: 185 Comm: kworker/5:1 Tainted: G        W         5.3.0-rc1-dirty #4
[    4.311487] Hardware name: Thundercomm Dragonboard 845c (DT)
[    4.318170] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    4.326932] Workqueue: pm genpd_power_off_work_fn
[    4.335355] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G        W         5.3.0-rc1-dirty #4
[    4.338441] pstate: 60c00005 (nZCv daif +PAN +UAO)
[    4.338446] pc : gdsc_toggle_logic+0xe0/0xe8
[    4.346955] Hardware name: Thundercomm Dragonboard 845c (DT)
[    4.352666] lr : gdsc_toggle_logic+0xe0/0xe8
[    4.352668] sp : ffff000010d4bce0
[    4.360997] Call trace:
[    4.365741] x29: ffff000010d4bce0 x28: 0000000000000000
[    4.373906]  dump_backtrace+0x0/0x150
[    4.378727] x27: ffff0000102bbcc8 x26: ffffbfdcfd7964c0
[    4.383040]  show_stack+0x14/0x20
[    4.388740] x25: 0000000000000000 x24: ffff328709a17000
[    4.393072]  dump_stack+0x9c/0xc4
[    4.393081]  panic+0x13c/0x32c
[    4.396428] x23: 0000000000000000 x22: 0000000000000000
[    4.398919]  mount_block_root+0x188/0x26c
[    4.398924]  mount_root+0x148/0x17c
[    4.404284] x21: 0000000000000000 x20: 00000000ffffff92
[    4.407988]  prepare_namespace+0x138/0x180
[    4.407992]  kernel_init_freeable+0x240/0x270
[    4.413351] x19: ffff328709a16c18 x18: ffffffffffffffff
[    4.416715]  kernel_init+0x10/0x108
[    4.416719]  ret_from_fork+0x10/0x18
[    4.422079] x17: 0000000000000000 x16: 0000000000000000
[    4.425455] SMP: stopping secondary CPUs
[    4.428517] x15: ffff3287099296c8 x14: 0720072007200720
[    4.482510] x13: 0720072007200720 x12: 0720072007200720
[    4.487874] x11: 0720072007200720 x10: 0720072007200720
[    4.493238] x9 : 0720072007200720 x8 : 7473207375746174
[    4.498601] x7 : 7320637364675f75 x6 : ffff328709af65fb
[    4.503965] x5 : 0000000000000000 x4 : 0000000000000000
[    4.509328] x3 : 0000000000000027 x2 : 00000000ffffffff
[    4.514692] x1 : 0d79790fa16c0600 x0 : 0000000000000000
[    4.520055] Call trace:
[    4.522532]  gdsc_toggle_logic+0xe0/0xe8
[    4.526494]  gdsc_disable+0x74/0x158
[    4.530106]  genpd_power_off+0x108/0x248
[    4.534070]  genpd_power_off_work_fn+0x30/0x50
[    4.538558]  process_one_work+0x1f4/0x358
[    4.542602]  worker_thread+0x50/0x498
[    4.546306]  kthread+0xf4/0x120
[    4.549485]  ret_from_fork+0x10/0x18
[    4.553095] ---[ end trace 91fca302c1bf7f5e ]---