Guest User

Untitled

a guest
Jan 26th, 2017
44
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.10.49-blackhawk (neerad@neerad-Satellite-L850) (gcc version 4.8 (GCC) ) #5 SMP PREEMPT Thu Jan 26 11:50:15 UTC 2017
  5. [ 0.000000] CPU: ARMv7 Processor [410fd030] revision 0 (ARMv7), cr=10c5387d
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8916 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM 8916 QRD SKUI
  8. [ 0.000000] cma: Found external_image__region@0, memory base 0x86000000, size 8 MiB, limit 0xffffffff
  9. [ 0.000000] cma: Found modem_adsp_region@0, memory base 0x86800000, size 84 MiB, limit 0xffffffff
  10. [ 0.000000] cma: Found pheripheral_region@0, memory base 0x8bc00000, size 6 MiB, limit 0xffffffff
  11. [ 0.000000] cma: Found mba_region@0, memory base 0x00000000, size 2 MiB, limit 0xffffffff
  12. [ 0.000000] cma: Found secure_region@0, memory base 0x00000000, size 109 MiB, limit 0xffffffff
  13. [ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 18 MiB, limit 0x90000000
  14. [ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
  15. [ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 20 MiB, limit 0xffffffff
  16. [ 0.000000] cma: Found pstore_reserve_region@0, memory base 0x8c400000, size 1 MiB, limit 0xffffffff
  17. [ 0.000000] cma: CMA: reserved 8 MiB at 0x86000000 for external_image_mem
  18. [ 0.000000] cma: CMA: reserved 84 MiB at 0x86800000 for modem_adsp_mem
  19. [ 0.000000] cma: CMA: reserved 6 MiB at 0x8bc00000 for peripheral_mem
  20. [ 0.000000] cma: CMA: reserved 4 MiB at 0xbfc00000 for mba_mem
  21. [ 0.000000] cma: CMA: reserved 112 MiB at 0xb8c00000 for secure_mem
  22. [ 0.000000] cma: CMA: reserved 20 MiB at 0x8ec00000 for venus_qseecom_mem
  23. [ 0.000000] cma: CMA: reserved 4 MiB at 0xb8800000 for audio_mem
  24. [ 0.000000] cma: CMA: reserved 20 MiB at 0x83000000 for cont_splash_mem
  25. [ 0.000000] cma: CMA: reserved 1 MiB at 0x8c400000 for pstore_reserve_mem
  26. [ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
  27. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  28. [ 0.000000] On node 0 totalpages: 236800
  29. [ 0.000000] free_area_init_node: node 0, pgdat c12f8e40, node_mem_map c2089000
  30. [ 0.000000] Normal zone: 1710 pages used for memmap
  31. [ 0.000000] Normal zone: 0 pages reserved
  32. [ 0.000000] Normal zone: 169216 pages, LIFO batch:31
  33. [ 0.000000] HighMem zone: 594 pages used for memmap
  34. [ 0.000000] HighMem zone: 67584 pages, LIFO batch:15
  35. [ 0.000000] PERCPU: Embedded 12 pages/cpu @c29d2000 s33088 r0 d16064 u49152
  36. [ 0.000000] pcpu-alloc: s33088 r0 d16064 u49152 alloc=12*4096
  37. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  38. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 235090
  39. [ 0.000000] Kernel command line: selinux=0 androidboot.selinux=enabled console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 phy-msm-usb.floated_charger_enable=1 androidboot.emmc=true androidboot.serialno=3a2f860 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_r61308_720p_video board_id=S88047C1:board_vol=1037232
  40. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  41. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  42. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  43. [ 0.000000] Memory: 744108K/947200K available (11597K kernel code, 978K rwdata, 3840K rodata, 1088K init, 2118K bss, 203092K reserved, 147456K highmem)
  44. [ 0.000000] Virtual kernel memory layout:
  45. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  46. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  47. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  48. lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  49. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  50. .text : 0xc0008000 - 0xc101343c (16430 kB)
  51. .init : 0xc1100000 - 0xc1210140 (1089 kB)
  52. .data : 0xc1212000 - 0xc1306a3c ( 979 kB)
  53. .bss : 0xc1306b00 - 0xc1518610 (2119 kB)
  54. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  55. [ 0.000000] Preemptible hierarchical RCU implementation.
  56. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  57. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  58. [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  59. [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  60. [ 0.000000] Switching to timer-based delay loop
  61. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
  62. [ 0.000000] Console: colour dummy device 80x30
  63. [ 0.000503] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  64. [ 0.000513] pid_max: default: 32768 minimum: 301
  65. [ 0.000671] Security Framework initialized
  66. [ 0.000686] SELinux: Disabled at boot.
  67. [ 0.000733] Mount-cache hash table entries: 512
  68. [ 0.001580] Initializing cgroup subsys debug
  69. [ 0.001591] Initializing cgroup subsys devices
  70. [ 0.001599] Initializing cgroup subsys freezer
  71. [ 0.001606] Initializing cgroup subsys net_cls
  72. [ 0.001612] Initializing cgroup subsys blkio
  73. [ 0.001619] Initializing cgroup subsys perf_event
  74. [ 0.001636] Initializing cgroup subsys net_prio
  75. [ 0.001643] Initializing cgroup subsys bfqio
  76. [ 0.001673] CPU: Testing write buffer coherency: ok
  77. [ 0.001955] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  78. [ 0.002024] Setting up static identity map for 0xc0b238d0 - 0xc0b23928
  79. [ 0.002749] ftrace: Allocated trace_printk buffers
  80. [ 0.003592] MSM Memory Dump base table set up
  81. [ 0.003614] MSM Memory Dump apps data table set up
  82. [ 0.004940] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  83. [ 0.005939] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  84. [ 0.006888] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  85. [ 0.007007] Brought up 4 CPUs
  86. [ 0.007027] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  87. [ 0.007033] CPU: All CPU(s) started in SVC mode.
  88. [ 0.007848] devtmpfs: initialized
  89. [ 0.021064] pinctrl core: initialized pinctrl subsystem
  90. [ 0.021328] regulator-dummy: no parameters
  91. [ 0.025933] NET: Registered protocol family 16
  92. [ 0.028485] DMA: preallocated 256 KiB pool for atomic coherent allocations
  93. [ 0.061204] gpiochip_find_base: found new base at 902
  94. [ 0.061284] gpiochip_add: registered GPIOs 902 to 1023 on device: msm_tlmm_gpio
  95. [ 0.069968] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
  96. [ 0.070137] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
  97. [ 0.074112] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
  98. [ 0.077865] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
  99. [ 0.078261] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
  100. [ 0.078607] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
  101. [ 0.079150] ACC: mem_acc_efuse_init: efuse_addr = 0x00058000 (len=0x1000)
  102. [ 0.079189] ACC: mem_acc_fuse_is_setting_expected: [row:0] = 0x4820000000d00705 @52:1 == 1 ?: no
  103. [ 0.079279] mem_acc_corner: 0 <--> 0 mV
  104. [ 0.081640] console [pstore-1] enabled
  105. [ 0.081650] ramoops: attached 0x100000@0x8c400000, ecc: 0/0
  106. [ 0.084089] KPI: Bootloader start count = 14374
  107. [ 0.084099] KPI: Bootloader end count = 79369
  108. [ 0.084107] KPI: Bootloader display count = 67829
  109. [ 0.084114] KPI: Bootloader load kernel count = 2053
  110. [ 0.084122] KPI: Kernel MPM timestamp = 101598
  111. [ 0.084129] KPI: Kernel MPM Clock frequency = 32768
  112. [ 0.084150] socinfo_print: v8, id=206, ver=1.0, raw_id=1797, raw_ver=0, hw_plat=11, hw_plat_ver=65537
  113. accessory_chip=0, hw_plat_subtype=7, pmic_model=65547, pmic_die_revision=131072
  114. [ 0.084838] smd_channel_probe_worker: allocation table not initialized
  115. [ 0.084945] smd_channel_probe_worker: allocation table not initialized
  116. [ 0.089859] msm_mpm_dev_probe(): Cannot get clk resource for XO
  117. [ 0.089885] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
  118. [ 0.091106] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle
  119. [ 0.091437] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  120. [ 0.091748] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  121. [ 0.092089] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle
  122. [ 0.092432] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle
  123. [ 0.092762] 8916_l1: 1225 mV normal idle
  124. [ 0.093103] 8916_l2: 1200 mV normal idle
  125. [ 0.093436] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle
  126. [ 0.093759] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  127. [ 0.094088] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
  128. [ 0.094414] 8916_l4: 2050 mV normal idle
  129. [ 0.094888] 8916_l5: 1800 mV normal idle
  130. [ 0.095228] 8916_l6: 1800 mV normal idle
  131. [ 0.095585] 8916_l7: 1800 mV normal idle
  132. [ 0.095913] 8916_l7_ao: 1800 mV normal idle
  133. [ 0.096228] 8916_l7_so: 1800 mV normal idle
  134. [ 0.096586] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle
  135. [ 0.096941] 8916_l9: 3300 mV normal idle
  136. [ 0.097304] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle
  137. [ 0.097673] 8916_l11: 1800 <--> 3300 mV at 3000 mV normal idle
  138. [ 0.098024] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle
  139. [ 0.098396] 8916_l13: 3075 mV normal idle
  140. [ 0.098767] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle
  141. [ 0.099115] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle
  142. [ 0.100044] 8916_l16: 2600 <--> 3300 mV at 2600 mV normal idle
  143. [ 0.100410] 8916_l17: 2850 mV normal idle
  144. [ 0.100787] 8916_l18: 2700 mV normal idle
  145. [ 0.101215] 8916_s2: 1050 <--> 1350 mV at 1150 mV
  146. [ 0.101302] spm_regulator_probe: name=8916_s2, range=LV, voltage=1150000 uV, mode=PWM, step rate=1200 uV/us
  147. [ 0.101876] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
  148. [ 0.101919] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x1210923446c, speed_bits = 0
  149. [ 0.101938] cpr_parse_pvs_version_fuse: apc_corner: [row: 0]: 0x4820000000d00705, pvs_version = 0
  150. [ 0.102029] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1125000 1287500] uV
  151. [ 0.102040] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
  152. [ 0.102051] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1162500] uV
  153. [ 0.102256] cpr_init_cpr_efuse: apc_corner: [row:27] = 0xa08d4603518d1967
  154. [ 0.102280] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
  155. [ 0.102293] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 849
  156. [ 0.102306] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 849
  157. [ 0.102318] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1125
  158. [ 0.102377] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
  159. [ 0.102387] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.650
  160. [ 0.102402] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 849
  161. [ 0.102411] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 849
  162. [ 0.102419] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 849
  163. [ 0.102429] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 849
  164. [ 0.102437] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 988
  165. [ 0.102446] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1051
  166. [ 0.102455] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1088
  167. [ 0.102464] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1125
  168. [ 0.102473] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1125
  169. [ 0.102523] cpr_populate_opp_table: apc_corner: adding OPP entry failed - OPP may not be enabled, rc=-22
  170. [ 0.102563] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2
  171. [ 0.102592] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
  172. [ 0.102603] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
  173. [ 0.102822] apc_corner: 0 <--> 0 mV
  174. [ 0.103433] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  175. [ 0.103519] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
  176. [ 0.103532] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
  177. [ 0.103556] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
  178. [ 0.103652] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
  179. [ 0.103719] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
  180. [ 0.103731] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
  181. [ 0.103750] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
  182. [ 0.103849] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
  183. [ 0.103913] i2c-msm-v2 78ba000.i2c: error on clk_get(core_clk):-517
  184. [ 0.103925] i2c-msm-v2 78ba000.i2c: error probe() failed with err:-517
  185. [ 0.103944] platform 78ba000.i2c: Driver i2c-msm-v2 requests probe deferral
  186. [ 0.104075] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  187. [ 0.104139] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
  188. [ 0.104151] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
  189. [ 0.104170] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
  190. [ 0.106301] msm-thermal qcom,msm-thermal.58: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  191. [ 0.106322] msm-thermal qcom,msm-thermal.58: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  192. [ 0.106339] msm-thermal qcom,msm-thermal.58: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
  193. [ 0.106356] msm-thermal qcom,msm-thermal.58: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
  194. [ 0.106374] msm-thermal qcom,msm-thermal.58: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  195. [ 0.106623] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  196. [ 0.107024] msm-thermal qcom,msm-thermal.58: probe_sensor_info:unable to find DT for sensor-information.KTM continues
  197. [ 0.107045] msm-thermal qcom,msm-thermal.58: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
  198. [ 0.107821] sps:sps is ready.
  199. [ 0.113089] qcom,rpmcc-8916 1800000.qcom,rpmcc: Registered RPM clocks.
  200. [ 0.119211] qcom,gcc-8916 1800000.qcom,gcc: Registered GCC clocks
  201. [ 0.121085] clock-a7 b011050.qcom,clock-a7: Speed bin: 0 PVS Version: 0
  202. [ 0.123312] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
  203. [ 0.123423] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  204. [ 0.123437] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  205. [ 0.124116] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
  206. [ 0.124214] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  207. [ 0.124226] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  208. [ 0.124698] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
  209. [ 0.124788] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  210. [ 0.124800] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  211. [ 0.125240] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
  212. [ 0.125329] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  213. [ 0.125340] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  214. [ 0.151508] bio: create slab <bio-0> at 0
  215. [ 0.153527] SCSI subsystem initialized
  216. [ 0.153680] usbcore: registered new interface driver usbfs
  217. [ 0.153720] usbcore: registered new interface driver hub
  218. [ 0.153810] usbcore: registered new device driver usb
  219. [ 0.153898] media: Linux media interface: v0.10
  220. [ 0.153938] Linux video capture interface: v2.00
  221. [ 0.155296] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  222. [ 0.155459] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
  223. [ 0.155603] cma: Assigned CMA region at 0 to 17.qcom,ion-heap device
  224. [ 0.155742] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
  225. [ 0.155940] ION heap system created
  226. [ 0.156019] ION heap kmalloc created
  227. [ 0.156030] ION heap qsecom created at 0x8ec00000 with size 1200000
  228. [ 0.156065] ION heap audio created at 0xb8800000 with size 314000
  229. [ 0.156075] ION heap pil_1 created at 0x8bc00000 with size 600000
  230. [ 0.156085] ION heap pil_2 created at 0x86800000 with size 5400000
  231. [ 0.156186] msm_bus_fabric_init_driver
  232. [ 0.156335] msm_bus_device 580000.ad-hoc-bus: Dev 1024
  233. [ 0.156349] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  234. [ 0.156357] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  235. [ 0.156417] msm_bus_device 580000.ad-hoc-bus: Dev 0
  236. [ 0.156429] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  237. [ 0.156437] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  238. [ 0.156491] msm_bus_device 580000.ad-hoc-bus: Dev 4096
  239. [ 0.156504] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  240. [ 0.156512] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  241. [ 0.158924] msm_bus_init_clk: Valid node clk node 1024 ctx 0
  242. [ 0.158930] msm_bus_init_clk: Valid node clk node 1024 ctx 1
  243. [ 0.158979] msm_bus_init_clk: Valid node clk node 0 ctx 0
  244. [ 0.158983] msm_bus_init_clk: Valid node clk node 0 ctx 1
  245. [ 0.159032] msm_bus_init_clk: Valid node clk node 4096 ctx 0
  246. [ 0.159036] msm_bus_init_clk: Valid node clk node 4096 ctx 1
  247. [ 0.163662] gdsc_venus: no parameters
  248. [ 0.163826] gdsc_mdss: no parameters
  249. [ 0.163964] gdsc_jpeg: no parameters
  250. [ 0.164113] gdsc_vfe: no parameters
  251. [ 0.164271] gdsc_oxili_gx: no parameters
  252. [ 0.164819] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
  253. [ 0.165273] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
  254. [ 0.166420] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f02a0000, with 2 ctx banks
  255. [ 0.169620] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0780000, with 20 ctx banks
  256. [ 0.170442] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
  257. [ 0.170528] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
  258. [ 0.170610] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
  259. [ 0.170679] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
  260. [ 0.170746] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
  261. [ 0.170816] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
  262. [ 0.170886] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
  263. [ 0.170953] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
  264. [ 0.171018] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
  265. [ 0.171084] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
  266. [ 0.171155] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
  267. [ 0.171223] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
  268. [ 0.171290] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
  269. [ 0.171357] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
  270. [ 0.171428] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
  271. [ 0.171494] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
  272. [ 0.171563] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
  273. [ 0.171630] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
  274. [ 0.171696] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
  275. [ 0.171762] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
  276. [ 0.171830] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
  277. [ 0.171899] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
  278. [ 0.172609] Advanced Linux Sound Architecture Driver Initialized.
  279. [ 0.173067] Bluetooth: Core ver 2.16
  280. [ 0.173100] NET: Registered protocol family 31
  281. [ 0.173105] Bluetooth: HCI device and connection manager initialized
  282. [ 0.173116] Bluetooth: HCI socket layer initialized
  283. [ 0.173124] Bluetooth: L2CAP socket layer initialized
  284. [ 0.173140] Bluetooth: SCO socket layer initialized
  285. [ 0.173323] cfg80211: Calling CRDA to update world regulatory domain
  286. [ 0.173341] cfg80211: World regulatory domain updated:
  287. [ 0.173347] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  288. [ 0.173354] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  289. [ 0.173360] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  290. [ 0.173367] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  291. [ 0.173373] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  292. [ 0.173379] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  293. [ 0.173385] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  294. [ 0.173392] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  295. [ 0.173398] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  296. [ 0.174225] Switching to clocksource arch_sys_counter
  297. [ 0.194585] NET: Registered protocol family 2
  298. [ 0.194957] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  299. [ 0.195060] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  300. [ 0.195156] TCP: Hash tables configured (established 8192 bind 8192)
  301. [ 0.195195] TCP: reno registered
  302. [ 0.195205] UDP hash table entries: 512 (order: 2, 16384 bytes)
  303. [ 0.195231] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  304. [ 0.195403] NET: Registered protocol family 1
  305. [ 0.195624] RPC: Registered named UNIX socket transport module.
  306. [ 0.195632] RPC: Registered udp transport module.
  307. [ 0.195637] RPC: Registered tcp transport module.
  308. [ 0.195642] RPC: Registered tcp NFSv4.1 backchannel transport module.
  309. [ 0.196039] gcc-mdss-8916 qcom,gcc-mdss.29: Registered GCC MDSS clocks.
  310. [ 0.196733] Trying to unpack rootfs image as initramfs...
  311. [ 0.216154] Freeing initrd memory: 544K (c2000000 - c2088000)
  312. [ 0.219421] hw perfevents: enabled with ARMv8 Cortex-A53 PMU driver, 7 counters available
  313. [ 0.220620] audit: initializing netlink socket (disabled)
  314. [ 0.220648] type=2000 audit(0.179:1): initialized
  315. [ 0.221159] bounce pool size: 64 pages
  316. [ 0.225595] fuse init (API version 7.23)
  317. [ 0.226013] msgmni has been set to 1223
  318. [ 0.227219] Key type asymmetric registered
  319. [ 0.227227] Asymmetric key parser 'x509' registered
  320. [ 0.227329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  321. [ 0.227336] io scheduler noop registered (default)
  322. [ 0.227342] io scheduler deadline registered
  323. [ 0.227354] io scheduler row registered
  324. [ 0.227435] io scheduler cfq registered
  325. [ 0.227512] io scheduler bfq registered
  326. [ 0.227517] BFQ I/O-scheduler: v7r8
  327. [ 0.227622] gpiochip_find_base: found new base at 898
  328. [ 0.227684] gpiochip_add: registered GPIOs 898 to 901 on device: pm8916-mpp
  329. [ 0.227896] qcom,qpnp-pin qpnp-pin-ee35e200: qpnp_pin_probe: gpio_chip registered between 898-901
  330. [ 0.227931] gpiochip_find_base: found new base at 897
  331. [ 0.227984] gpiochip_add: registered GPIOs 897 to 897 on device: pm8916-gpio
  332. [ 0.228025] qcom,qpnp-pin qpnp-pin-ee35e400: qpnp_pin_probe: gpio_chip registered between 897-897
  333. [ 0.228148] gpiochip_find_base: found new base at 865
  334. [ 0.228205] gpiochip_add: registered GPIOs 865 to 896 on device: smp2p
  335. [ 0.228610] gpiochip_find_base: found new base at 833
  336. [ 0.228666] gpiochip_add: registered GPIOs 833 to 864 on device: smp2p
  337. [ 0.228688] gpiochip_find_base: found new base at 801
  338. [ 0.228743] gpiochip_add: registered GPIOs 801 to 832 on device: smp2p
  339. [ 0.229157] gpiochip_find_base: found new base at 769
  340. [ 0.229210] gpiochip_add: registered GPIOs 769 to 800 on device: smp2p
  341. [ 0.229232] gpiochip_find_base: found new base at 737
  342. [ 0.229286] gpiochip_add: registered GPIOs 737 to 768 on device: slave-kernel
  343. [ 0.229340] platform qcom,smp2pgpio-ssr-smp2p-1-in.12: Driver smp2pgpio requests probe deferral
  344. [ 0.229362] gpiochip_find_base: found new base at 737
  345. [ 0.229415] gpiochip_add: registered GPIOs 737 to 768 on device: master-kernel
  346. [ 0.229459] platform qcom,smp2pgpio-ssr-smp2p-1-out.13: Driver smp2pgpio requests probe deferral
  347. [ 0.229480] gpiochip_find_base: found new base at 737
  348. [ 0.229532] gpiochip_add: registered GPIOs 737 to 768 on device: smp2p
  349. [ 0.229968] gpiochip_find_base: found new base at 705
  350. [ 0.230022] gpiochip_add: registered GPIOs 705 to 736 on device: smp2p
  351. [ 0.230043] gpiochip_find_base: found new base at 673
  352. [ 0.230096] gpiochip_add: registered GPIOs 673 to 704 on device: slave-kernel
  353. [ 0.230141] platform qcom,smp2pgpio-ssr-smp2p-4-in.18: Driver smp2pgpio requests probe deferral
  354. [ 0.230161] gpiochip_find_base: found new base at 673
  355. [ 0.230214] gpiochip_add: registered GPIOs 673 to 704 on device: master-kernel
  356. [ 0.230257] platform qcom,smp2pgpio-ssr-smp2p-4-out.19: Driver smp2pgpio requests probe deferral
  357. [ 0.230748] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
  358. [ 0.230763] mdss_mdp_probe+0x15c/0x9ac->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
  359. [ 0.230774] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
  360. [ 0.230801] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-pipe-cursor-off : doesn't exist in device tree
  361. [ 0.230841] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
  362. [ 0.230854] mdss_mdp_pipe_addr_setup: type:2 ftchid:7 xinid:1 num:3 ndx:0x8 prio:1
  363. [ 0.230861] mdss_mdp_pipe_addr_setup: type:2 ftchid:8 xinid:5 num:4 ndx:0x10 prio:2
  364. [ 0.230875] mdss_mdp_pipe_addr_setup: type:3 ftchid:4 xinid:2 num:6 ndx:0x40 prio:3
  365. [ 0.230895] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
  366. [ 0.231073] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  367. [ 0.231083] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-cmd : u32 array read
  368. [ 0.231100] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
  369. [ 0.231129] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-ad-off : doesn't exist in device tree
  370. [ 0.231438] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
  371. [ 0.232982] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  372. [ 0.233092] mdss_dsi_panel_init: Panel Name = r61308_HD720p_video_AUO3.5
  373. [ 0.233187] of_get_named_gpio_flags: can't parse gpios property
  374. [ 0.233524] mdss_dsi_parse_panel_features: ulps feature disabled
  375. [ 0.233536] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  376. [ 0.233545] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
  377. [ 0.233559] of_get_named_gpio_flags: can't parse gpios property
  378. [ 0.233563] mdss_dsi_parse_panel_features:1184, Disp_en gpio not specified
  379. [ 0.233604] mdss_dsi_panel_init: Continuous splash enabled
  380. [ 0.233816] of_get_named_gpio_flags: can't parse gpios property
  381. [ 0.233822] dsi_panel_device_register:1819, Disp_en gpio not specified
  382. [ 0.233829] of_get_named_gpio_flags: can't parse gpios property
  383. [ 0.233833] dsi_panel_device_register:1827, TE gpio not specified
  384. [ 0.233841] of_get_named_gpio_flags: can't parse gpios property
  385. [ 0.233845] dsi_panel_device_register: bklt_en gpio not specified
  386. [ 0.234075] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
  387. [ 0.234080] PLL 1 Clock's did not register
  388. [ 0.234096] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f0136000 ctrl_size=25c phy_base=f0138500 phy_size=2b0
  389. [ 0.264943] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi
  390. [ 0.265123] mdss_hw_rev_init: MDP Rev=10060000
  391. [ 0.265496] mdss_dsi_status_init: DSI status check interval:5000
  392. [ 0.265827] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.24
  393. [ 0.266671] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
  394. [ 0.267011] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
  395. [ 0.267071] mdss_mdp_splash_parse_dt: splash mem child node is not present
  396. [ 0.268561] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
  397. [ 0.269525] msm_rpm_log_probe: OK
  398. [ 0.270778] NET: Registered protocol family 27
  399. [ 0.272273] In memshare_probe, Memshare probe success
  400. [ 0.274121] of_get_named_gpio_flags exited with status -517
  401. [ 0.274131] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
  402. [ 0.274174] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
  403. [ 0.275487] of_get_named_gpio_flags exited with status -517
  404. [ 0.275496] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
  405. [ 0.275578] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
  406. [ 0.283901] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
  407. [ 0.289931] brd: module loaded
  408. [ 0.292335] loop: module loaded
  409. [ 0.292703] zram: Created 1 device(s)
  410. [ 0.293072] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
  411. [ 0.293093] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
  412. [ 0.293100] QSEECOM: qseecom_probe: Device does not support PFE
  413. [ 0.293109] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  414. [ 0.293114] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
  415. [ 0.293403] QSEECOM: qseecom_probe: secure app region addr=0x86000000 size=0x300000
  416. [ 0.295551] SCSI Media Changer driver v0.25
  417. [ 0.295992] of_get_named_gpio_flags: can't parse gpios property
  418. [ 0.296000] of_get_named_gpio_flags: can't parse gpios property
  419. [ 0.296005] of_get_named_gpio_flags: can't parse gpios property
  420. [ 0.296010] of_get_named_gpio_flags: can't parse gpios property
  421. [ 0.296014] of_get_named_gpio_flags: can't parse gpios property
  422. [ 0.296019] of_get_named_gpio_flags: can't parse gpios property
  423. [ 0.296025] of_get_named_gpio_flags: can't parse gpios property
  424. [ 0.296401] sps: BAM device 0x07884000 is not registered yet.
  425. [ 0.296415] sps:BAM 0x07884000 is registered.
  426. [ 0.298725] sps:BAM 0x07884000 (va:0xf03c0000) enabled: ver:0x18, number of pipes:16
  427. [ 0.299344] tun: Universal TUN/TAP device driver, 1.6
  428. [ 0.299351] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  429. [ 0.301430] PPP generic driver version 2.4.2
  430. [ 0.301532] PPP BSD Compression module registered
  431. [ 0.301539] PPP Deflate Compression module registered
  432. [ 0.301553] PPP MPPE Compression module registered
  433. [ 0.301559] NET: Registered protocol family 24
  434. [ 0.301609] usbcore: registered new interface driver rndis_wlan
  435. [ 0.301950] wcnss_wlan probed in built-in mode
  436. [ 0.302522] usbcore: registered new interface driver asix
  437. [ 0.302548] usbcore: registered new interface driver ax88179_178a
  438. [ 0.302576] usbcore: registered new interface driver cdc_ether
  439. [ 0.302601] usbcore: registered new interface driver dm9601
  440. [ 0.302625] usbcore: registered new interface driver net1080
  441. [ 0.302650] usbcore: registered new interface driver rndis_host
  442. [ 0.302675] usbcore: registered new interface driver cdc_subset
  443. [ 0.302700] usbcore: registered new interface driver zaurus
  444. [ 0.302902] usbcore: registered new interface driver cdc_ncm
  445. [ 0.303233] msm_sharedmem: sharedmem_register_qmi: qmi init successful
  446. [ 0.303478] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  447. [ 0.303600] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
  448. [ 0.303719] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
  449. [ 0.303805] msm_sharedmem: msm_sharedmem_probe: qcom,client-id property not found
  450. [ 0.303910] msm_sharedmem: msm_sharedmem_probe: Device created for client 'bimc'
  451. [ 0.304248] msm_otg 78d9000.usb: msm_otg probe
  452. [ 0.304761] of_get_named_gpio_flags: can't parse gpios property
  453. [ 0.304769] of_get_named_gpio_flags: can't parse gpios property
  454. [ 0.304786] of_get_named_gpio_flags: can't parse gpios property
  455. [ 0.306826] msm_otg 78d9000.usb: OTG regs = f017e000
  456. [ 0.308429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  457. [ 0.308437] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  458. [ 0.308704] Unable to get vbus_otg
  459. [ 0.308713] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  460. [ 0.308731] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  461. [ 0.308752] ehci-msm2: Qualcomm EHCI Host Controller
  462. [ 0.309188] ice40_spi_probe: ice40_spi_probe failed
  463. [ 0.309561] usbcore: registered new interface driver cdc_acm
  464. [ 0.309567] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  465. [ 0.309595] usbcore: registered new interface driver ccid_bridge
  466. [ 0.309720] ccid_bridge_init: success
  467. [ 0.309750] usbcore: registered new interface driver usb-storage
  468. [ 0.309773] usbcore: registered new interface driver ums-alauda
  469. [ 0.309795] usbcore: registered new interface driver ums-cypress
  470. [ 0.309819] usbcore: registered new interface driver ums-datafab
  471. [ 0.309841] usbcore: registered new interface driver ums-freecom
  472. [ 0.309863] usbcore: registered new interface driver ums-isd200
  473. [ 0.309886] usbcore: registered new interface driver ums-jumpshot
  474. [ 0.309907] usbcore: registered new interface driver ums-karma
  475. [ 0.309933] usbcore: registered new interface driver ums-onetouch
  476. [ 0.309955] usbcore: registered new interface driver ums-sddr09
  477. [ 0.309977] usbcore: registered new interface driver ums-sddr55
  478. [ 0.310000] usbcore: registered new interface driver ums-usbat
  479. [ 0.310072] usbcore: registered new interface driver usbserial
  480. [ 0.310096] usbcore: registered new interface driver qc_csvt
  481. [ 0.310120] usbserial: USB Serial support registered for qc_csvt
  482. [ 0.310147] usbcore: registered new interface driver usb_ehset_test
  483. [ 0.311856] mousedev: PS/2 mouse device common for all mice
  484. [ 0.311931] usbcore: registered new interface driver xpad
  485. [ 0.311960] usbcore: registered new interface driver usb_acecad
  486. [ 0.311988] usbcore: registered new interface driver aiptek
  487. [ 0.312015] usbcore: registered new interface driver gtco
  488. [ 0.312042] usbcore: registered new interface driver hanwang
  489. [ 0.312070] usbcore: registered new interface driver kbtab
  490. [ 0.312100] usbcore: registered new interface driver wacom
  491. [ 0.312980] input: ft5x06_ts as /devices/soc.0/78b9000.i2c/i2c-5/5-0038/input/input0
  492. [ 0.544471] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
  493. [ 0.545196] ft5x06_ts 5-0038: Device ID = 0x14
  494. [ 0.545836] ft5x06_ts 5-0038: report rate = 90Hz
  495. [ 0.547521] ft5x06_ts 5-0038: Firmware version = 22.0.0
  496. [ 0.548498] of_get_named_gpio_flags: can't parse gpios property
  497. [ 0.654429] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0xa (ok)
  498. [ 0.662757] input: MPU6050-accel as /devices/soc.0/78b6000.i2c/i2c-0/0-0068/input/input1
  499. [ 0.662950] input: gyroscope as /devices/soc.0/78b6000.i2c/i2c-0/0-0068/input/input2
  500. [ 0.663227] AKM compass driver: initialize.
  501. [ 0.663261] AKM compass driver: initialize.
  502. [ 0.746359] input: compass as /devices/virtual/input/input3
  503. [ 0.746738] akm09911 0-000c: successfully probed.
  504. [ 0.746921] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0x2e MSTR_STS:0x0d1343c8 OPER:0x00000010
  505. [ 0.746951] compass 0-002e: yas_i2c_rxdata: transfer failed.
  506. [ 0.746956] yas537 i2c error
  507. [ 0.746967] compass: probe of 0-002e failed with error -107
  508. [ 0.747113] ltr553 0-0023: read liteon,als-gain failed. Drop to default
  509. [ 0.747122] ltr553 0-0023: read liteon,als-sensitivity failed. Drop to default
  510. [ 0.878350] input: ltr553-light as /devices/soc.0/78b6000.i2c/i2c-0/0-0023/input/input4
  511. [ 0.878542] input: ltr553-proximity as /devices/soc.0/78b6000.i2c/i2c-0/0-0023/input/input5
  512. [ 0.879790] qcom,qpnp-rtc qpnp-rtc-ee35e600: rtc core: registered qpnp_rtc as rtc0
  513. [ 0.879968] i2c /dev entries driver
  514. [ 0.882142] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
  515. [ 0.883086] msm_cci_probe: pdev ee311c00 device id = -1
  516. [ 0.886958] msm_flash_lm3642_init entry
  517. [ 0.887557] msm_eeprom_parse_memory_map: pageen not needed
  518. [ 0.887574] msm_eeprom_parse_memory_map: pageen not needed
  519. [ 0.887589] msm_eeprom_parse_memory_map: pageen not needed
  520. [ 0.974034] msm_cci_init:781: hw_version = 0x10000008
  521. [ 1.188567] MSM-SENSOR-INIT msm_sensor_init_module:143 MSM_SENSOR_INIT_MODULE (null)
  522. [ 1.189364] g_sctrl[0] ede8e400
  523. [ 1.189565] g_sctrl[1] ede8e600
  524. [ 1.189905] MSM-CPP cpp_probe:2373 Bus master 0
  525. [ 1.204566] MSM-CPP cpp_init_hardware:921 CPP HW Version: 0x40010000
  526. [ 1.204576] MSM-CPP cpp_init_hardware:931 stream_cnt:0
  527. [ 1.207435] __msm_jpeg_init:1236] Jpeg Device id 0
  528. [ 1.208422] iris_radio: Cannot open the command channel
  529. [ 1.241611] BQ2022A:bq2022a_read_bat_id: bat_module_id= a
  530. [ 1.241619] BQ2022A:bq2022a_probe: success!!
  531. [ 1.242049] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xb (ok)
  532. [ 1.242663] smb1360_otg_vreg: no parameters
  533. [ 3.399802] SMB:smb1360_get_bat_character: batt_capacity_mah=2200 cc_soc_coeff=0x8373 fg_thermistor_c1_coeff=0x85d2
  534. [ 3.402707] smb1360-chg-fg 4-0014: SMB1360 revision=0x3 probe success! batt=1 usb=1 soc=100
  535. [ 3.420908] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  536. [ 3.421000] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  537.  
  538. [ 3.421011] Bluetooth: HCI UART driver ver 2.2
  539. [ 3.421018] Bluetooth: HCI H4 protocol initialized
  540. [ 3.421131] cpuidle: using governor ladder
  541. [ 3.421137] cpuidle: using governor menu
  542. [ 3.421162] sdhci: Secure Digital Host Controller Interface driver
  543. [ 3.421166] sdhci: Copyright(c) Pierre Ossman
  544. [ 3.421171] sdhci-pltfm: SDHCI platform and OF driver helper
  545. [ 3.421511] of_get_named_gpio_flags: can't parse gpios property
  546. [ 3.424911] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
  547. [ 3.424922] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
  548. [ 3.424930] sdhci_msm 7824900.sdhci: dma_latency = 2
  549. [ 3.424937] sdhci_msm 7824900.sdhci: dma_latency = 401
  550. [ 3.424944] sdhci_msm 7824900.sdhci: dma_latency = 701
  551. [ 3.424952] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
  552. [ 3.424959] sdhci_msm 7824900.sdhci: dma_latency = 200
  553. [ 3.424968] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
  554. [ 3.424975] sdhci_msm 7824900.sdhci: dma_latency = 200
  555. [ 3.424982] sdhci_msm 7824900.sdhci: Host using default pm_qos
  556. [ 3.425613] mmc0: no vqmmc regulator found
  557. [ 3.425624] mmc0: no vmmc regulator found
  558. [ 3.454436] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
  559. [ 3.454691] of_get_named_gpio_flags: can't parse gpios property
  560. [ 3.461257] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
  561. [ 3.461278] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 1, qos type = 2
  562. [ 3.461286] sdhci_msm 7864900.sdhci: dma_latency = 701
  563. [ 3.461294] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
  564. [ 3.461302] sdhci_msm 7864900.sdhci: dma_latency = 200
  565. [ 3.461310] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
  566. [ 3.461317] sdhci_msm 7864900.sdhci: dma_latency = 200
  567. [ 3.461324] sdhci_msm 7864900.sdhci: Host using default pm_qos
  568. [ 3.461868] mmc1: no vqmmc regulator found
  569. [ 3.461879] mmc1: no vmmc regulator found
  570. [ 3.494058] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
  571. [ 3.494749] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok)
  572. [ 3.502484] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
  573. [ 3.502501] qce 720000.qcedev: CE device = 0x0
  574. , IO base, CE = 0xf0740000
  575. , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  576. IO base BAM = 0x (null)
  577. BAM IRQ 239
  578. Engines Availability = 0x2010853
  579. [ 3.502527] sps:BAM 0x00704000 is registered.
  580. [ 3.503246] sps:BAM 0x00704000 (va:0xf0c40000) enabled: ver:0x25, number of pipes:8
  581. [ 3.504008] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  582. [ 3.504813] qcedev: FIPS140-2 Known Answer Tests : Skipped
  583. [ 3.506090] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
  584. [ 3.506104] qcrypto 720000.qcrypto: CE device = 0x0
  585. , IO base, CE = 0xf0c80000
  586. , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
  587. IO base BAM = 0x (null)
  588. BAM IRQ 239
  589. Engines Availability = 0x2010853
  590. [ 3.507536] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
  591. [ 3.508010] qcrypto 720000.qcrypto: qcrypto-ecb-aes
  592. [ 3.508117] qcrypto 720000.qcrypto: qcrypto-cbc-aes
  593. [ 3.508200] qcrypto 720000.qcrypto: qcrypto-ctr-aes
  594. [ 3.508268] qcrypto 720000.qcrypto: qcrypto-ecb-des
  595. [ 3.508336] qcrypto 720000.qcrypto: qcrypto-cbc-des
  596. [ 3.508403] qcrypto 720000.qcrypto: qcrypto-ecb-3des
  597. [ 3.508470] qcrypto 720000.qcrypto: qcrypto-cbc-3des
  598. [ 3.508538] qcrypto 720000.qcrypto: qcrypto-xts-aes
  599. [ 3.508604] qcrypto 720000.qcrypto: qcrypto-sha1
  600. [ 3.508670] qcrypto 720000.qcrypto: qcrypto-sha256
  601. [ 3.508736] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  602. [ 3.508803] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  603. [ 3.508869] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  604. [ 3.508935] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  605. [ 3.509001] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  606. [ 3.509067] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  607. [ 3.509133] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
  608. [ 3.509199] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
  609. [ 3.509268] qcrypto 720000.qcrypto: qcrypto-aes-ccm
  610. [ 3.509335] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
  611. [ 3.509341] qcrypto: FIPS140-2 Known Answer Tests: Skipped
  612. [ 3.509647] hidraw: raw HID events driver (C) Jiri Kosina
  613. [ 3.510978] usbcore: registered new interface driver usbhid
  614. [ 3.510984] usbhid: USB HID core driver
  615. [ 3.511358] ashmem: initialized
  616. [ 3.511944] sps:BAM 0x078c4000 is registered.
  617. [ 3.512254] qcom,qpnp-power-on qpnp-power-on-ee35e000: PMIC@SID0 Power-on reason: Triggered from RTC (RTC alarm expiry) and 'warm' boot
  618. [ 3.512274] qcom,qpnp-power-on qpnp-power-on-ee35e000: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
  619. [ 3.512429] input: qpnp_pon as /devices/virtual/input/input6
  620. [ 3.513874] PMIC@SID0: PM8916 v2.0 options: 0, 2, 0, 0
  621. [ 3.515348] armbw-pm qcom,armbw-pm.31: BW HWmon governor registered.
  622. [ 3.516052] devfreq qcom,cpubw.30: Couldn't update frequency transition information.
  623. [ 3.516652] usbcore: registered new interface driver snd-usb-audio
  624. [ 3.524205] msm-pcm-lpa qcom,msm-pcm-lpa.39: msm_pcm_probe: dev name qcom,msm-pcm-lpa.39
  625. [ 3.524978] platform qcom,msm-voip-dsp.41: Driver msm-voip-dsp requests probe deferral
  626. [ 3.525367] platform qcom,msm-pcm-voice.42: Driver msm-pcm-voice requests probe deferral
  627. [ 3.528186] u32 classifier
  628. [ 3.528193] Actions configured
  629. [ 3.528203] Netfilter messages via NETLINK v0.30.
  630. [ 3.528213] nfnl_acct: registering with nfnetlink.
  631. [ 3.528273] nf_conntrack version 0.5.0 (14011 buckets, 56044 max)
  632. [ 3.528654] ctnetlink v0.93: registering with nfnetlink.
  633. [ 3.528718] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  634. [ 3.528723] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  635. [ 3.529082] xt_time: kernel timezone is -0000
  636. [ 3.529321] ip_tables: (C) 2000-2006 Netfilter Core Team
  637. [ 3.529485] arp_tables: (C) 2002 David S. Miller
  638. [ 3.529531] TCP: cubic registered
  639. [ 3.529536] Initializing XFRM netlink socket
  640. [ 3.529817] NET: Registered protocol family 10
  641. [ 3.530290] mip6: Mobile IPv6
  642. [ 3.530314] ip6_tables: (C) 2000-2006 Netfilter Core Team
  643. [ 3.530415] sit: IPv6 over IPv4 tunneling driver
  644. [ 3.530778] NET: Registered protocol family 17
  645. [ 3.530800] NET: Registered protocol family 15
  646. [ 3.530860] Bridge firewalling registered
  647. [ 3.530869] Ebtables v2.0 registered
  648. [ 3.530989] Bluetooth: RFCOMM TTY layer initialized
  649. [ 3.531010] Bluetooth: RFCOMM socket layer initialized
  650. [ 3.531016] Bluetooth: RFCOMM ver 1.11
  651. [ 3.531022] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  652. [ 3.531027] Bluetooth: BNEP filters: protocol multicast
  653. [ 3.531037] Bluetooth: BNEP socket layer initialized
  654. [ 3.531043] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  655. [ 3.531052] Bluetooth: HIDP socket layer initialized
  656. [ 3.531075] l2tp_core: L2TP core driver, V2.0
  657. [ 3.531088] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  658. [ 3.531093] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  659. [ 3.531107] l2tp_netlink: L2TP netlink interface
  660. [ 3.531130] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  661. [ 3.531144] l2tp_debugfs: L2TP debugfs support
  662. [ 3.531149] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  663. [ 3.531354] gpiochip_find_base: found new base at 673
  664. [ 3.531424] gpiochip_add: registered GPIOs 673 to 704 on device: slave-kernel
  665. [ 3.531656] gpiochip_find_base: found new base at 641
  666. [ 3.531720] gpiochip_add: registered GPIOs 641 to 672 on device: master-kernel
  667. [ 3.531790] gpiochip_find_base: found new base at 609
  668. [ 3.531859] gpiochip_add: registered GPIOs 609 to 640 on device: slave-kernel
  669. [ 3.532065] gpiochip_find_base: found new base at 577
  670. [ 3.532115] gpiochip_add: registered GPIOs 577 to 608 on device: master-kernel
  671. [ 3.534104] cma: Assigned CMA region at 0 to qcom,mba-mem.151 device
  672. [ 3.536165] msm_otg 78d9000.usb: phy_reset: success
  673. [ 3.537164] mmc0: BKOPS_EN bit = 0
  674. [ 3.538493] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 0
  675. [ 3.538521] Registering SWP/SWPB emulation handler
  676. [ 3.552649] mmc0: new HS200 MMC card at address 0001
  677. [ 3.552946] mmcblk0: mmc0:0001 H8G2d 7.28 GiB
  678. [ 3.554868] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
  679. [ 3.618507] mem_acc_corner: disabling
  680. [ 3.618519] regulator-dummy: disabling
  681. [ 3.619649] file system registered
  682. [ 3.619703] mbim_init: initialize 1 instances
  683. [ 3.619794] mbim_init: Initialized 1 ports
  684. [ 3.619801] mbim_bam_setup: no_ports:1
  685. [ 3.619885] mbim_bam_setup: Initialized 1 ports
  686. [ 3.620686] rndis_qc_init: initialize rndis QC instance
  687. [ 3.621009] android_usb gadget: Mass Storage Function, version: 2009/09/11
  688. [ 3.621017] android_usb gadget: Number of LUNs=3
  689. [ 3.621024] lun0: LUN: removable file: (no medium)
  690. [ 3.621030] lun1: LUN: read only CD-ROM file: (no medium)
  691. [ 3.621036] lun2: LUN: removable file: (no medium)
  692. [ 3.621276] android_usb gadget: android_usb ready
  693. [ 3.621287] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
  694. [ 3.622207] gpiod_set_debounce: gpio-1009 status -22
  695. [ 3.622448] input: gpio-keys as /devices/soc.0/gpio_keys.63/input/input7
  696. [ 3.622858] qcom,qpnp-rtc qpnp-rtc-ee35e600: setting system clock to 2017-01-24 22:49:26 UTC (1485298166)
  697. [ 3.623684] msm_thermal:interrupt_mode_init Interrupt mode init
  698. [ 3.624474] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
  699. [ 3.626658] led_gpio_flash_probe:probe successfully!
  700. [ 3.628118] qcom,cc-debug-8916 1874000.qcom,cc-debug: Registered Debug Mux successfully
  701. [ 3.629000] clock_late_init: Removing enables held for handed-off clocks
  702. [ 3.632657] ALSA device list:
  703. [ 3.632665] No soundcards found.
  704. [ 3.632888] Warning: unable to open an initial console.
  705. [ 3.633016] Freeing unused kernel memory: 64K (c1200000 - c1210000)
  706. [ 3.776631] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  707. [ 3.776650] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  708. [ 4.073817] mmc1: new ultra high speed SDR104 SDHC card at address 0001
  709. [ 4.074347] mmcblk1: mmc1:0001 00000 29.8 GiB
  710. [ 4.076006] mmcblk1: p1
  711. [ 6.047725] EXT4-fs (mmcblk0p30): couldn't mount as ext3 due to feature incompatibilities
  712. [ 6.048063] EXT4-fs (mmcblk0p30): couldn't mount as ext2 due to feature incompatibilities
  713. [ 6.160858] EXT4-fs (mmcblk0p30): ext4_orphan_cleanup: deleting unreferenced inode 211368
  714. [ 6.161005] EXT4-fs (mmcblk0p30): 1 orphan inode deleted
  715. [ 6.161015] EXT4-fs (mmcblk0p30): recovery complete
  716. [ 6.167494] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: (null)
  717. [ 6.283582] enable_store: android_usb: already disabled
  718. [ 6.283924] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  719. [ 6.293316] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
  720. [ 6.293387] android_usb gadget: using random self ethernet address
  721. [ 6.293741] android_usb gadget: using random host ethernet address
  722. [ 6.294194] rndis0: MAC 96:98:d5:92:13:e2
  723. [ 6.294202] rndis0: HOST MAC f2:fa:76:e8:92:05
  724. [ 6.294315] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  725. [ 6.297680] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  726. [ 6.555180] msm_otg 78d9000.usb: Avail curr from USB = 100
  727. [ 6.555264] android_work: android_work: did not send uevent (0 0 (null))
  728. [ 6.633637] android_work: android_work: sent uevent USB_STATE=CONNECTED
  729. [ 6.637359] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  730. [ 6.741595] android_work: android_work: sent uevent USB_STATE=CONNECTED
  731. [ 6.743374] android_usb gadget: high-speed config #1: 86000c8.android_usb
  732. [ 6.743681] msm_otg 78d9000.usb: Avail curr from USB = 500
  733. [ 6.743734] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  734. [ 6.794323] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  735. [ 7.387354] EXT4-fs (mmcblk0p30): re-mounted. Opts: (null)
  736. [ 7.472980] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
  737. [ 7.473819] systemd[1]: Set hostname to <Sailfish>.
  738. [ 7.714534] systemd[1]: usb-moded.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
  739. [ 7.720612] systemd[1]: sensorfwd.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
  740. [ 7.740122] systemd[1]: [/lib/systemd/system/none.mount:7] Not an absolute path, ignoring: none
  741. [ 7.743073] systemd[1]: Cannot create mount unit for API file system /sys/fs/cgroup/bfqio. Refusing.
  742. [ 7.743553] systemd[1]: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
  743. [ 7.746163] systemd[1]: Cannot add dependency job for unit sys-fs-pstore.mount, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
  744. [ 7.746197] systemd[1]: Cannot add dependency job for unit sys-fs-cgroup-bfqio.mount, ignoring: Unit sys-fs-cgroup-bfqio.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-cgroup-bfqio.mount' for details.
  745. [ 7.747401] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  746. [ 7.747577] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  747. [ 7.747626] systemd[1]: Starting Login Prompts.
  748. [ 7.747671] systemd[1]: Reached target Login Prompts.
  749. [ 7.747707] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  750. [ 7.747789] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  751. [ 7.747821] systemd[1]: Starting Delayed Shutdown Socket.
  752. [ 7.747896] systemd[1]: Listening on Delayed Shutdown Socket.
  753. [ 7.747962] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  754. [ 7.748002] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  755. [ 7.748108] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  756. [ 7.748166] systemd[1]: Started Replay Read-Ahead Data.
  757. [ 7.748207] systemd[1]: Starting udev Kernel Socket.
  758. [ 7.748301] systemd[1]: Listening on udev Kernel Socket.
  759. [ 7.748341] systemd[1]: Starting udev Control Socket.
  760. [ 7.748424] systemd[1]: Listening on udev Control Socket.
  761. [ 7.748474] systemd[1]: Starting Collect Read-Ahead Data...
  762. [ 7.749848] systemd[1]: Starting Journal Socket.
  763. [ 7.750068] systemd[1]: Listening on Journal Socket.
  764. [ 7.750192] systemd[1]: Mounting Debug File System...
  765. [ 7.751209] systemd[1]: Mounted Huge Pages File System.
  766. [ 7.751284] systemd[1]: Starting udev Coldplug all Devices...
  767. [ 7.752635] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  768. [ 7.754374] systemd[1]: Mounted POSIX Message Queue File System.
  769. [ 7.754483] systemd[1]: Starting Journal Service...
  770. [ 7.756115] systemd[1]: Started Journal Service.
  771. [ 7.777864] systemd-journald[404]: Vacuuming done, freed 0 bytes
  772. [ 7.901278] EXT4-fs (mmcblk0p30): re-mounted. Opts: (null)
  773. [ 7.956402] systemd-udevd[427]: starting version 208
  774. [ 8.397141] EXT4-fs (mmcblk0p25): barriers disabled
  775. [ 8.405647] EXT4-fs (mmcblk0p25): recovery complete
  776. [ 37.826152] systemd-journald[404]: Received request to flush runtime journal from PID 1
  777. [ 37.884078] init: could not import file 'init.qcom.power.rc' from '/init.qcom.rc'
  778. [ 37.898438] init: could not import file '/init.superuser.rc' from '/init.cm.rc'
  779. [ 37.900405] init: /dev/hw_random not found
  780. [ 37.900457] keychord: using input dev qpnp_pon for fevent
  781. [ 37.900466] keychord: using input dev gpio-keys for fevent
  782. [ 37.900678] init: loglevel: invalid log level'64'
  783. [ 37.912822] init: /dev/hw_random not found
  784. [ 37.913982] fs_mgr: Cannot open file fstab.qcom
  785. [ 37.915559] init: fs_mgr_mount_all returned an error
  786. [ 37.915739] init: fs_mgr_mount_all returned unexpected error 255
  787. [ 37.919779] init: property 'ro.product.manufacturer' doesn't exist while expanding '${ro.product.manufacturer}'
  788. [ 37.919797] init: cannot expand '${ro.product.manufacturer}' while writing to '/sys/class/android_usb/android0/iManufacturer'
  789. [ 37.919815] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
  790. [ 37.919828] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
  791. [ 37.919844] init: property 'ro.product.manufacturer' doesn't exist while expanding '${ro.product.manufacturer}'
  792. [ 37.919856] init: cannot expand '${ro.product.manufacturer}' while writing to '/sys/class/android_usb/android0/f_rndis/manufacturer'
  793. [ 37.988204] init: Detected MSM SOC ID=206 SOC VER=65537 BOARD TYPE=QRD
  794. [ 37.988317] init: Detected board ID=S88047C1
  795. [ 37.988570] init: Setup S88047C1 properties done!
  796. [ 37.988756] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
  797. [ 38.016020] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
  798. [ 38.016048] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
  799. [ 38.016073] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
  800. [ 38.016091] init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms'
  801. [ 38.016110] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
  802. [ 38.016122] init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms'
  803. [ 38.016244] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
  804. [ 38.016259] init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms'
  805. [ 38.023043] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x86800000 to 0x8ba00000
  806. [ 38.045958] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xbfc00000 to 0xbfd00000
  807. [ 38.084655] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
  808. [ 38.116206] rndis_function_bind_config: rndis_function_bind_config MAC: F2:FA:76:E8:92:05
  809. [ 38.116278] android_usb gadget: using random self ethernet address
  810. [ 38.116316] android_usb gadget: using random host ethernet address
  811. [ 38.116831] rndis0: MAC 72:36:2f:af:55:36
  812. [ 38.116842] rndis0: HOST MAC da:5d:66:40:93:db
  813. [ 38.116898] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
  814. [ 38.119963] msm_otg 78d9000.usb: Avail curr from USB = 2
  815. [ 38.119992] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
  816. [ 38.120061] android_work: android_work: did not send uevent (1 1 (null))
  817. [ 38.137542] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  818. [ 38.325118] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESUME_EVENT received
  819. [ 38.325158] msm_otg 78d9000.usb: Avail curr from USB = 100
  820. [ 38.325235] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  821. [ 38.403752] android_work: android_work: sent uevent USB_STATE=CONNECTED
  822. [ 38.407391] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  823. [ 38.511679] android_work: android_work: sent uevent USB_STATE=CONNECTED
  824. [ 38.512729] android_usb gadget: high-speed config #1: 86000c8.android_usb
  825. [ 38.513047] msm_otg 78d9000.usb: Avail curr from USB = 500
  826. [ 38.513111] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  827. [ 38.564343] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  828. [ 38.897572] warning: `ofonod' uses 32-bit capabilities (legacy support in use)
  829. [ 40.433066] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
  830. [ 40.539053] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
  831. [ 40.539085] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
  832. [ 40.539125] memshare: Modem Restart has happened
  833. [ 40.539601] M-Notify: General: 7
  834. [ 40.556157] init: cannot find '/usr/libexec/droid-hybris/system/bin/minimediaservice', disabling 'minimedia'
  835. [ 40.556208] init: cannot find '/usr/libexec/droid-hybris/system/bin/minisfservice', disabling 'minisf'
  836. [ 40.556242] init: cannot find '/usr/libexec/droid-hybris/system/bin/miniafservice', disabling 'miniaf'
  837. [ 40.557769] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  838. [ 40.603329] init: service 'console' requires console
  839. [ 40.665588] init: cannot find '/system/bin/loc_launcher', disabling 'loc_launcher'
  840. [ 40.665628] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
  841. [ 40.669455] msm_thermal:store_cc_enabled Core control disabled
  842. [ 40.669566] msm_thermal:store_cc_enabled Core control enabled
  843. [ 40.669961] msm_thermal:store_cc_enabled Core control disabled
  844. [ 40.670147] msm_thermal:store_cc_enabled Core control enabled
  845. [ 40.680650] logd.auditd: start
  846. [ 40.865668] msm_thermal:set_enabled enabled = 0
  847. [ 41.460732] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  848.  
  849. [ 41.461588] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  850.  
  851. [ 41.462334] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  852.  
  853. [ 41.462442] MSM-SENSOR-INIT msm_sensor_init_subdev_ioctl:126 default
  854.  
  855. [ 41.462642] msm_cci_release invalid ref count 0 / cci state 1
  856. [ 41.462650] msm_sensor_cci_i2c_util line 496 rc = -22
  857. [ 41.462656] msm_actuator_close:828 cci_init failed
  858. [ 41.468467] msm_vfe40_init_qos_parms: NO D/S entries found
  859. [ 41.468483] msm_vfe40_init_vbif_parms: NO VBIF entries found
  860. [ 41.486754] MSM-CPP cpp_init_hardware:921 CPP HW Version: 0x40010000
  861. [ 41.486766] MSM-CPP cpp_init_hardware:931 stream_cnt:0
  862. [ 41.512215] MSM-CPP cpp_load_fw:1076 MC Bootloader Version: 0x312e3176
  863. [ 41.518281] MSM-CPP cpp_load_fw:1089 CPP FW Version: 0x10040005
RAW Paste Data