Public Pastes
daily pastebin goal
64%
SHARE
TWEET

Untitled

a guest Jun 14th, 2015 210 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000,0] Booting Linux on physical CPU 0
  2. [    0.000000,0] Initializing cgroup subsys cpu
  3. [    0.000000,0] Linux version 3.4.42-g3f34512-dirty (louis@louis-All-Series) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Sun Jun 14 19:18:25 CEST 2015
  4. [    0.000000,0] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  5. [    0.000000,0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [    0.000000,0] Machine: Qualcomm MSM 8226 (Flattened Device Tree), model: Motorola QC-MSM8226 Falcon
  7. [    0.000000,0] qcom,ion-heap@28 reserved EBI1 size 314000
  8. [    0.000000,0] qcom,mdss_fb_primary reserved EBI1 size 800000
  9. [    0.000000,0] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-41a0000
  10. [    0.000000,0] qcom,wdt@f9017000 reserved EBI1 size b000
  11. [    0.000000,0] Node qcom,msm-mem-hole removed memory 8400000-c400000
  12. [    0.000000,0] Node qcom,msm-mem-hole removed memory d200000-f600000
  13. [    0.000000,0] Node qcom,msm-mem-hole removed memory fa00000-ff00000
  14. [    0.000000,0] qcom,tz-log@fe805720 reserved EBI1 size 1000
  15. [    0.000000,0] qcom,msm-efuse reserved EBI1 size 1000
  16. [    0.000000,0] memory pool 3 (start 0x3f400000 size c00000) initialized
  17. [    0.000000,0] cma: CMA: reserved 16 MiB at 25000000
  18. [    0.000000,0] cma: Found secure_region, memory base 0, size 70 MiB
  19. [    0.000000,0] cma: CMA: reserved 72 MiB at 3a000000
  20. [    0.000000,0] cma: Found adsp_region, memory base 0, size 42 MiB
  21. [    0.000000,0] cma: CMA: reserved 44 MiB at 37400000
  22. [    0.000000,0] cma: Found qsecom_region, memory base 0, size 4 MiB
  23. [    0.000000,0] cma: CMA: reserved 4 MiB at 3f000000
  24. [    0.000000,0] Memory policy: ECC disabled, Data cache writealloc
  25. [    0.000000,0] IMEM DT static mapping successful
  26. [    0.000000,0] PERCPU: Embedded 10 pages/cpu @c1a71000 s16512 r8192 d16256 u40960
  27. [    0.000000,0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 230144
  28. [    0.000000,0] Kernel command line: console=tty0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 vmalloc=400M utags.blkdev=/dev/block/platform/msm_sdcc.1/by-name/utags androidboot.write_protect=0 androidboot.emmc=true androidboot.serialno=TA883031EV androidboot.baseband=msm androidboot.mode=normal androidboot.device=falcon androidboot.hwrev=0x83C0 androidboot.radio=0x1 androidboot.powerup_reason=0x00020000 bootreason=kernel_panic androidboot.write_protect=0 restart.download_mode=0 androidboot.fsg-id= androidboot.secure_hardware=1 androidboot.cid=0x7 androidboot.bootloader=0x4118 androidboot.carrier= mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_mot_cmi_720p_video_v2
  29. [    0.000000,0] PID hash table entries: 2048 (order: 1, 8192 bytes)
  30. [    0.000000,0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  31. [    0.000000,0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  32. [    0.000000,0] allocated 2097152 bytes of page_cgroup
  33. [    0.000000,0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  34. [    0.000000,0] Memory: 132MB 14MB 4MB 757MB = 907MB total
  35. [    0.000000,0] Memory: 740872k/740872k available, 200184k reserved, 290684K highmem
  36. [    0.000000,0] Virtual kernel memory layout:
  37. [    0.000000,0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  38. [    0.000000,0]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  39. [    0.000000,0]     vmalloc : 0xe6800000 - 0xff000000   ( 392 MB)
  40. [    0.000000,0]     lowmem  : 0xc0000000 - 0xe6000000   ( 608 MB)
  41. [    0.000000,0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  42. [    0.000000,0]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  43. [    0.000000,0]       .text : 0xc0008000 - 0xc0d29000   (13444 kB)
  44. [    0.000000,0]       .init : 0xc0e00000 - 0xc0f14080   (1105 kB)
  45. [    0.000000,0]       .data : 0xc0f16000 - 0xc0fb7a1c   ( 647 kB)
  46. [    0.000000,0]        .bss : 0xc0fb7a40 - 0xc12291fc   (2502 kB)
  47. [    0.000000,0] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  48. [    0.000000,0] Preemptible hierarchical RCU implementation.
  49. [    0.000000,0]        RCU dyntick-idle grace-period acceleration is enabled.
  50. [    0.000000,0] NR_IRQS:16 nr_irqs:16 16
  51. [    0.000000,0] kmemleak: Kernel memory leak detector disabled
  52. [    0.000000,0] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
  53. [    0.000000,0] Switching to timer-based delay loop
  54. [    0.000000,0] Console: colour dummy device 80x30
  55. [    0.000000,0] console [tty0] enabled
  56. [    0.000000,0] register logcat console
  57. [    0.000000,0] console [logk-1] enabled
  58. [    0.000000,0] kmemleak: Early log buffer exceeded (766), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
  59. [    0.001481,0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  60. [    0.001544,0] pid_max: default: 32768 minimum: 301
  61. [    0.001747,0] Security Framework initialized
  62. [    0.001819,0] AppArmor: AppArmor initialized
  63. [    0.001942,0] Mount-cache hash table entries: 512
  64. [    0.060677,0] Initializing cgroup subsys cpuacct
  65. [    0.060725,0] Initializing cgroup subsys memory
  66. [    0.060792,0] Initializing cgroup subsys freezer
  67. [    0.060909,0] CPU: Testing write buffer coherency: ok
  68. [    0.061177,0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  69. [    0.061283,0] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  70. [    0.064802,0] Setting up static identity map for 0x9483a0 - 0x948404
  71. [    0.064851,0] MSM Memory Dump table set up
  72. [    0.070318,1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  73. [    0.074825,2] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  74. [    0.079312,3] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  75. [    0.079428,0] Brought up 4 CPUs
  76. [    0.079469,0] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  77. [    0.080877,0] devtmpfs: initialized
  78. [    0.098827,0] EVM: security.selinux
  79. [    0.098869,0] EVM: security.SMACK64
  80. [    0.098899,0] EVM: security.capability
  81. [    0.101535,0] dummy:
  82. [    0.107801,0] NET: Registered protocol family 16
  83. [    0.112011,0] DMA: preallocated 256 KiB pool for atomic coherent allocations
  84. [    0.113132,0] Android kernel panic mmc handler initialized
  85. [    0.115532,0] KPI: Bootloader start count = 59316
  86. [    0.115582,0] KPI: Bootloader end count = 95459
  87. [    0.115616,0] KPI: Bootloader display count = 96890036
  88. [    0.115650,0] KPI: Bootloader load kernel count = 3567
  89. [    0.115685,0] KPI: Kernel MPM timestamp = 185280
  90. [    0.115717,0] KPI: Kernel MPM Clock frequency = 32768
  91. [    0.115763,0] socinfo_print: v8, id=158, ver=2.0, raw_id=2048, raw_ver=1, hw_plat=0, hw_plat_ver=0
  92. [    0.115776,0]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65540, pmic_die_revision=131073
  93. [    0.138621,0] gpiochip_add: registered GPIOs 0 to 116 on device: msmgpio
  94. [    0.147039,0] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
  95. [    0.173857,0] Initialized persistent memory from 3eae0000-3eafffff
  96. [    0.174047,0] persistent_ram: found existing buffer, size 55231, start 55231
  97. [    0.315654,0] console [ram-1] enabled
  98. [    0.335047,0] 8226_s1: 500 <--> 1275 mV at 0 mV normal idle
  99. [    0.335980,0] 8226_s1_corner: 0 <--> 0 mV at 0 mV normal idle
  100. [    0.336916,0] 8226_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  101. [    0.337763,0] 8226_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  102. [    0.338737,0] 8226_s3: 1200 <--> 1300 mV at 1200 mV normal idle
  103. [    0.339655,0] 8226_s4: 1800 <--> 2200 mV at 1800 mV normal idle
  104. [    0.340655,0] 8226_s5: 1150 mV normal idle
  105. [    0.341535,0] 8226_l1: 1225 mV normal idle
  106. [    0.342523,0] 8226_l2: 1200 mV normal idle
  107. [    0.343401,0] 8226_l3: 750 <--> 1337 mV at 0 mV normal idle
  108. [    0.344358,0] 8226_l3_ao: 750 <--> 1337 mV at 0 mV normal idle
  109. [    0.345200,0] 8226_l3_so: 750 <--> 1337 mV at 750 mV normal idle
  110. [    0.346256,0] 8226_l4: 1200 mV normal idle
  111. [    0.347167,0] 8226_l5: 1200 mV normal idle
  112. [    0.348069,0] 8226_l6: 1800 mV normal idle
  113. [    0.349070,0] 8226_l7: 1850 mV normal idle
  114. [    0.349960,0] 8226_l8: 1800 mV normal idle
  115. [    0.350844,0] 8226_l8_ao: 1800 mV normal idle
  116. [    0.351773,0] 8226_l8_so: 1800 mV normal idle
  117. [    0.352697,0] 8226_l9: 2050 mV normal idle
  118. [    0.353703,0] 8226_l10: 1800 mV normal idle
  119. [    0.354589,0] 8226_l12: 1800 mV normal idle
  120. [    0.355488,0] 8226_l14: 2750 mV normal idle
  121. [    0.356474,0] 8226_l15: 2800 mV normal idle
  122. [    0.357386,0] 8226_l16: 3000 <--> 3350 mV at 3300 mV normal idle
  123. [    0.358351,0] 8226_l17: 2950 mV normal idle
  124. [    0.359235,0] 8226_l18: 2950 mV normal idle
  125. [    0.360097,0] 8226_l19: 2850 mV normal idle
  126. [    0.361081,0] 8226_l20: 3075 mV normal idle
  127. [    0.361981,0] 8226_l21: 1800 <--> 2950 mV at 2950 mV normal idle
  128. [    0.362954,0] 8226_l22: 1800 <--> 2950 mV at 2950 mV normal idle
  129. [    0.363860,0] 8226_l23: 1800 <--> 2950 mV at 2950 mV normal idle
  130. [    0.364844,0] 8226_l24: 1300 <--> 1350 mV at 1300 mV normal idle
  131. [    0.365793,0] 8226_l25: 1775 <--> 2125 mV at 1775 mV normal idle
  132. [    0.366776,0] 8226_l26: 1225 mV normal idle
  133. [    0.367681,0] 8226_l27: 2050 mV normal idle
  134. [    0.368967,0] 8226_l28: 1800 <--> 3400 mV at 3100 mV normal idle
  135. [    0.371523,0] 8226_lvs1:
  136. [    0.404564,0] msm-thermal qcom,msm-thermal.66: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-mitigation-temp. KTM continues
  137. [    0.404995,0] msm-thermal qcom,msm-thermal.66: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. KTM continues
  138. [    0.405659,0] vdd_restriction_reg_init:Defer vdd rstr freq init
  139. [    0.405890,0] msm-thermal qcom,msm-thermal.66: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
  140. [    0.406901,1] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
  141. [    0.406922,2] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2
  142. [    0.406942,3] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3
  143. [    0.406959,2] hw-breakpoint: CPU 2 failed to disable vector catch
  144. [    0.406972,3] hw-breakpoint: CPU 3 failed to disable vector catch
  145. [    0.407950,1] hw-breakpoint: CPU 1 failed to disable vector catch
  146. [    0.408090,0] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
  147. [    0.408252,0] hw-breakpoint: CPU 0 failed to disable vector catch
  148. [    0.409668,0] 8226_s2: 900 <--> 1350 mV at 1150 mV
  149. [    0.410053,0] spm_regulator_probe: name=8226_s2, range=MV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
  150. [    0.412228,0] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
  151. [    0.412630,0] cpr_fuse_is_setting_expected: [row:54] = 0x0 @42:6 == 7 ?: no
  152. [    0.412829,0] cpr_parse_speed_bin_fuse: [row: 22]: 0x2014822000000528, speed_bits = 0
  153. [    0.413126,0] cpr_fuse_is_setting_expected: [row:22] = 0x2014822000000528 @53:1 == 0 ?: yes
  154. [    0.413420,0] cpr_fuse_is_setting_expected: [row:22] = 0x2014822000000528 @24:3 == 2 ?: no
  155. [    0.413710,0] cpr_pvs_init: pvs voltage: [1140000 1140000 1150000] uV
  156. [    0.413864,0] cpr_pvs_init: ceiling voltage: [1140000 1150000 1280000] uV
  157. [    0.414096,0] cpr_pvs_init: floor voltage: [1140000 1140000 1140000] uV
  158. [    0.414545,0] cpr_fuse_is_setting_expected: [row:138] = 0x8404a357380428 @57:1 == 1 ?: no
  159. [    0.414851,0] cpr_init_cpr_efuse: [row:138] = 0x8404a357380428
  160. [    0.415131,0] cpr_init_cpr_efuse: disable = 0, local = 1
  161. [    0.415278,0] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 855
  162. [    0.415512,0] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 896
  163. [    0.415656,0] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 1064
  164. [    0.416058,0] cpr_init_cpr_parameters: CPR is enabled by default.
  165. [    0.416256,0] cpr_config: Timer count: 0x17700 (for 5000 us)
  166. [    0.416845,0] apc_corner: 0 <--> 0 mV
  167. [    0.418039,0] qup_i2c f9924000.i2c: Missing 'qcom,i2c-src-freq' DT entry
  168. [    0.418326,0] qup_i2c f9924000.i2c: Missing 'qcom,master-id' DT entry
  169. [    0.418554,0] qup_i2c f9924000.i2c: No src_clk_rate specified in platfrom data
  170. [    0.418804,0] qup_i2c f9924000.i2c: Using default clock rate 19200000Hz
  171. [    0.422789,0] qup_i2c f9926000.i2c: Missing 'qcom,i2c-src-freq' DT entry
  172. [    0.422989,0] qup_i2c f9926000.i2c: Missing 'qcom,master-id' DT entry
  173. [    0.423301,0] qup_i2c f9926000.i2c: No src_clk_rate specified in platfrom data
  174. [    0.423460,0] qup_i2c f9926000.i2c: Using default clock rate 19200000Hz
  175. [    0.423988,0] qup_i2c f9927000.i2c: Missing 'qcom,master-id' DT entry
  176. [    0.426790,0] sps:sps is ready.
  177. [    0.430466,0] gdsc_venus:
  178. [    0.431198,0] gdsc_mdss:
  179. [    0.431777,0] gdsc_jpeg:
  180. [    0.432407,0] gdsc_vfe:
  181. [    0.432990,0] gdsc_oxili_cx:
  182. [    0.433563,0] gdsc_usb_hsic:
  183. [    0.434688,0] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  184. [    0.443739,0] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr e6a00000
  185. [    0.444061,0] Physical OCMEM zone layout:
  186. [    0.444299,0]  zone graphics : 0xfec00000 - 0xfec1ffff ( 128 KB)
  187. [    0.482256,0] bio: create slab <bio-0> at 0
  188. [    0.483816,0] vddio_disp:
  189. [    0.484034,0] vddio_disp: supplied by 8226_l8
  190. [    0.485389,0] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  191. [    0.485793,0] ION-heap mm: Cannot specify alignment for this type of heap
  192. [    0.486148,0] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
  193. [    0.486542,0] ION-heap adsp: Cannot specify alignment for this type of heap
  194. [    0.486947,0] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  195. [    0.487997,0] ION heap system created
  196. [    0.488398,0] ION heap kmalloc created
  197. [    0.488604,0] ION heap mm created at 0x3a000000 with size 4600000
  198. [    0.488810,0] ION heap adsp created at 0x37400000 with size 2a00000
  199. [    0.489102,0] ION heap qsecom created at 0x3f000000 with size 400000
  200. [    0.489432,0] ION heap audio created at 0x3f40b000 with size 314000
  201. [    0.489641,0] ION heap pil_1 created at 0x0dc00000 with size 1900000
  202. [    0.492216,0] SCSI subsystem initialized
  203. [    0.492621,0] usbcore: registered new interface driver usbfs
  204. [    0.493015,0] usbcore: registered new interface driver hub
  205. [    0.493338,0] usbcore: registered new device driver usb
  206. [    0.494100,0] Linux media interface: v0.10
  207. [    0.494438,0] Linux video capture interface: v2.00
  208. [    0.497038,0] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at e6960000, with 3 ctx banks
  209. [    0.498843,0] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at e6a40000, with 3 ctx banks
  210. [    0.500710,0] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at e6a60000, with 3 ctx banks
  211. [    0.502423,0] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at e6a80000, with 3 ctx banks
  212. [    0.504153,0] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at e6aa0000, with 3 ctx banks
  213. [    0.506305,0] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
  214. [    0.506753,0] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
  215. [    0.507193,0] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
  216. [    0.507571,0] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
  217. [    0.508041,0] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
  218. [    0.508483,0] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
  219. [    0.508850,0] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
  220. [    0.509218,0] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_cp using bank 1
  221. [    0.509656,0] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
  222. [    0.510137,0] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
  223. [    0.510485,0] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
  224. [    0.510933,0] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
  225. [    0.511389,0] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
  226. [    0.511737,0] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
  227. [    0.512172,0] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
  228. [    0.512970,0] Advanced Linux Sound Architecture Driver Version 1.0.25.
  229. [    0.513957,0] Bluetooth: Core ver 2.16
  230. [    0.514284,0] NET: Registered protocol family 31
  231. [    0.514428,0] Bluetooth: HCI device and connection manager initialized
  232. [    0.514696,0] Bluetooth: HCI socket layer initialized
  233. [    0.514871,0] Bluetooth: L2CAP socket layer initialized
  234. [    0.515362,0] Bluetooth: SCO socket layer initialized
  235. [    0.515924,0] cfg80211: Calling CRDA to update world regulatory domain
  236. [    0.516246,0] cfg80211: World regulatory domain updated:
  237. [    0.516387,0] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  238. [    0.516630,0] cfg80211:   (2402000 KHz - 2462000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  239. [    0.516780,0] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  240. [    0.517021,0] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  241. [    0.517261,0] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  242. [    0.517652,0] NetLabel: Initializing
  243. [    0.517795,0] NetLabel:  domain hash size = 128
  244. [    0.517929,0] NetLabel:  protocols = UNLABELED CIPSOv4
  245. [    0.518251,0] NetLabel:  unlabeled traffic allowed by default
  246. [    0.520306,0] Switching to clocksource arch_sys_counter
  247. [    0.567043,0] AppArmor: AppArmor Filesystem Enabled
  248. [    0.583652,0] NET: Registered protocol family 2
  249. [    0.584175,0] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  250. [    0.585169,0] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  251. [    0.586539,0] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  252. [    0.587760,0] TCP: Hash tables configured (established 65536 bind 65536)
  253. [    0.587992,0] TCP: reno registered
  254. [    0.588159,0] UDP hash table entries: 256 (order: 1, 8192 bytes)
  255. [    0.588416,0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  256. [    0.588991,0] NET: Registered protocol family 1
  257. [    0.589606,0] Trying to unpack rootfs image as initramfs...
  258. [    0.926657,0] Freeing initrd memory: 4320K
  259. [    0.929705,0] bootinfo: start = 0x3eb00000 size = 0x800 ptr = 0xe68e5000
  260. [    0.938000,0] clock-a7 f9011050.qcom,clock-a7: Speed bin: 0
  261. [    0.938250,0] clock-a7 f9011050.qcom,clock-a7: PVS version: 2
  262. [    0.941601,0] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
  263. [    0.943304,0] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
  264. [    0.943810,0] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
  265. [    0.945553,0] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
  266. [    0.946174,0] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
  267. [    0.947849,0] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
  268. [    0.948513,0] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
  269. [    0.950332,0] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
  270. [    0.950892,0] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
  271. [    0.952756,0] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
  272. [    0.953287,0] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
  273. [    0.955180,0] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
  274. [    0.955787,0] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
  275. [    0.957617,0] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
  276. [    0.958455,0] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
  277. [    0.960326,0] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
  278. [    0.961005,0] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
  279. [    0.963031,0] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
  280. [    0.965709,0] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
  281. [    0.973591,1] pil_pronto fb21b000.qcom,pronto: using secure boot
  282. [    0.974039,1] NOHZ: local_softirq_pending 40
  283. [    0.974451,1] NOHZ: local_softirq_pending 40
  284. [    0.977610,1] pil_venus fdce0000.qcom,venus: using secure boot
  285. [    0.991744,1] NET: Registered protocol family 27
  286. [    0.992175,1] NOHZ: local_softirq_pending 40
  287. [    1.009371,1] msm_rpm_log_probe: OK
  288. [    1.016740,1] ocmem: Client sensors (id: 6) not allowed to use OCMEM
  289. [    1.016947,1] OCMEM notifier registration failed
  290. [    1.017239,1] sns_ocmem_main: sns_ocmem_init failed -14
  291. [    1.020095,1] NOHZ: local_softirq_pending 40
  292. [    1.020266,1] NOHZ: local_softirq_pending 40
  293. [    1.021452,1] mmi_unit_info (SMEM) for modem: version = 0x02, device = 'falcon', radio = 1, system_rev = 0x83c0, system_serial = 0x151cc5010f000000, machine = 'Qualcomm MSM 8226 (Flattened Dev', barcode = 'TA883031EV', baseband = '', carrier = ''
  294. [    1.022186,1] audit: initializing netlink socket (disabled)
  295. [    1.022341,1] type=2000 audit(1.000:1): initialized
  296. [    1.145616,1] highmem bounce pool size: 64 pages
  297. [    1.145781,1] NOHZ: local_softirq_pending 40
  298. [    1.156874,1] fuse init (API version 7.18)
  299. [    1.157575,1] msgmni has been set to 919
  300. [    1.160111,1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  301. [    1.160321,1] io scheduler noop registered (default)
  302. [    1.160445,1] io scheduler deadline registered
  303. [    1.160672,1] io scheduler row registered
  304. [    1.161000,1] io scheduler cfq registered
  305. [    1.161469,1] gpiochip_add: registered GPIOs 440 to 447 on device: pm8226-gpio
  306. [    1.162202,1] gpiochip_add: registered GPIOs 432 to 439 on device: pm8226-mpp
  307. [    1.162495,1] qpnp_pin_check_constraints: invalid source select value 12 for mpp 2
  308. [    1.162611,1] qcom,qpnp-pin qpnp-pin-e4a58c00: _qpnp_pin_config: unable to set default config for pmic pin 2
  309. [    1.162934,1] qcom,qpnp-pin: probe of qpnp-pin-e4a58c00 failed with error -22
  310. [    1.163491,1] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xe6ac0000
  311. [    1.163720,1] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xe697e000
  312. [    1.164077,1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  313. [    1.164258,1] mdss_mdp_parse_dt_fudge_factors: err reading qcom,mdss-ib-factor-overlap
  314. [    1.164461,1] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
  315. [    1.166907,1] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  316. [    1.167096,1] BL: panel=mipi_mot_video_cmi_hd_450, manufacture_id(0xDA)= 0xc2 controller_ver(0xDB)= 0x86 controller_drv_ver(0XDC)= 0x1, full=0x00000000000186c2, detect status = 0x0
  317. [    1.167445,1] mdss_dsi_panel_init: Panel Name = mipi_mot_video_cmi_hd_450 v2
  318. [    1.167996,1] mdss_dsi_panel_init:1660 Continuous splash flag enabled.
  319. [    1.168194,1] mdss_dsi_panel_init:1672 Partial update disabled.
  320. [    1.168548,1] dsi_panel_device_register:1307, Disp_en gpio not specified
  321. [    1.168837,1] mdss_dsi_retrieve_ctrl_resources: dsi base=e6a54800 size=600
  322. [    1.190675,1] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  323. [    1.191114,1] mdss_hw_init: MDP Rev=10010001
  324. [    1.194805,1] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0x800000
  325. [    1.195536,1] mdss_fb_alloc_fbmem_iommu: allocating 8388608 bytes at e7000000 (3f800000 phys) for fb 0
  326. [    1.195961,1] mdss_fb_register: FrameBuffer[0] 720x1280 size=8388608 registered successfully!
  327. [    1.196206,1] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
  328. [    1.196574,1] mdss_dsi_status_init: DSI status check interval:8000
  329. [    1.199509,0] tps65132: 4000 <--> 6000 mV at 5400 mV
  330. [    1.266133,0] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  331. [    1.266486,0] f991f000.serial: ttyHSL0 at MMIO 0xf991f000 (irq = 141) is a MSM
  332. [    1.270247,0] msm_serial_hsl_init: driver initialized
  333. [    1.274856,0] diagchar initialized nowkgsl bus ib [0] = 1600000000
  334. [    1.277388,0] kgsl bus ib [1] = 3200000000
  335. [    1.277484,0] kgsl bus ib [2] = 4256000000
  336. [    1.277642,0] kgsl bus index is 2 for pwrlevel 0
  337. [    1.277737,0] kgsl bus index is 1 for pwrlevel 1
  338. [    1.277832,0] kgsl bus index is 0 for pwrlevel 2
  339. [    1.278449,0] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  340. [    1.288942,0] brd: module loaded
  341. [    1.293276,0] loop: module loaded
  342. [    1.294078,0] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
  343. [    1.294208,0] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  344. [    1.294474,0] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
  345. [    1.294713,0] QSEECOM: qseecom_probe: secure app region addr=0xd980000 size=0x256000
  346. [    1.295566,0] load_utags ERR opening (/dev/block/platform/msm_sdcc.1/by-name/utags) errno=2
  347. [    1.295827,0] build_utags_directory Can not open utags
  348. [    1.296539,0] mmi_factory factory_support.72: Using mmi,factory-support-msm8960
  349. [    1.298944,0] AKM8963 compass driver: initialize.
  350. [    1.300508,0] akm8963 2-000c: akm8963_i2c_check_device: AK8973 found
  351. [    1.301015,0] input: compass as /devices/virtual/input/input0
  352. [    1.301809,0] akm8963 2-000c: akm8963_probe: success
  353. [    1.302932,0] LIS3DH accelerometer driver
  354. [    1.306131,0] input: accelerometer as /devices/virtual/input/input1
  355. [    1.306966,0] lis3dh 2-0019: lis3dh probed
  356. [    1.307146,0] L3G4200D gyroscope driver
  357. [    1.307443,0] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  358. [    1.307615,0] i2c-core: driver [tabla-i2c-core] using legacy resume method
  359. [    1.307954,0] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  360. [    1.308061,0] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  361. [    1.308352,0] Loading pn544 driver
  362. [    1.308972,0] SCSI Media Changer driver v0.25
  363. [    1.310470,0] tun: Universal TUN/TAP device driver, 1.6
  364. [    1.310641,0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  365. [    1.311020,0] rmnet_init: BAM devices[9]
  366. [    1.319431,0] PPP generic driver version 2.4.2
  367. [    1.319772,0] PPP BSD Compression module registered
  368. [    1.319964,0] PPP Deflate Compression module registered
  369. [    1.329088,1] PPP MPPE Compression module registered
  370. [    1.329273,1] NET: Registered protocol family 24
  371. [    1.329816,1] wcnss_wlan probed in built-in mode
  372. [    1.331359,1] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  373. [    1.331577,1] usbcore: registered new interface driver pegasus
  374. [    1.331836,1] usbcore: registered new interface driver asix
  375. [    1.332010,1] usbcore: registered new interface driver cdc_ether
  376. [    1.332255,1] usbcore: registered new interface driver net1080
  377. [    1.332432,1] usbcore: registered new interface driver cdc_subset
  378. [    1.332672,1] usbcore: registered new interface driver zaurus
  379. [    1.332849,1] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  380. [    1.333212,1] usbcore: registered new interface driver cdc_ncm
  381. [    1.334974,1] msm_otg f9a55000.usb: msm_otg probe
  382. [    1.337588,1] msm_otg f9a55000.usb: OTG regs = e6a5e000
  383. [    1.340344,1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  384. [    1.340950,1] Unable to get vbus_otg
  385. [    1.341057,1] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  386. [    1.341275,1] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  387. [    1.342827,1] usbcore: registered new interface driver cdc_acm
  388. [    1.342935,1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  389. [    1.343181,1] usbcore: registered new interface driver ccid_bridge
  390. [    1.343476,1] ccid_bridge_init: success
  391. [    1.343642,1] Initializing USB Mass Storage driver...
  392. [    1.343832,1] usbcore: registered new interface driver usb-storage
  393. [    1.344002,1] USB Mass Storage support registered.
  394. [    1.344163,1] usbcore: registered new interface driver ums-alauda
  395. [    1.344396,1] usbcore: registered new interface driver ums-cypress
  396. [    1.344565,1] usbcore: registered new interface driver ums-datafab
  397. [    1.344796,1] usbcore: registered new interface driver ums-freecom
  398. [    1.344971,1] usbcore: registered new interface driver ums-isd200
  399. [    1.345205,1] usbcore: registered new interface driver ums-jumpshot
  400. [    1.345374,1] usbcore: registered new interface driver ums-karma
  401. [    1.345607,1] usbcore: registered new interface driver ums-onetouch
  402. [    1.345841,1] usbcore: registered new interface driver ums-sddr09
  403. [    1.346012,1] usbcore: registered new interface driver ums-sddr55
  404. [    1.346246,1] usbcore: registered new interface driver ums-usbat
  405. [    1.346423,1] usbcore: registered new interface driver usb_ehset_test
  406. [    1.347768,1] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  407. [    1.348577,1] mbim_init: initialize 1 instances
  408. [    1.348907,1] mbim_init: Initialized 1 ports
  409. [    1.351280,1] rndis_qc_init: initialize rndis QC instance
  410. [    1.351997,1] android_usb gadget: Mass Storage Function, version: 2009/09/11
  411. [    1.352109,1] android_usb gadget: Number of LUNs=1
  412. [    1.352294,1]  lun0: LUN: removable file: (no medium)
  413. [    1.353546,1] android_usb gadget: android_usb ready
  414. [    1.355138,1] i2c-core: driver [cyttsp3-i2c] using legacy suspend method
  415. [    1.355314,1] i2c-core: driver [cyttsp3-i2c] using legacy resume method
  416. [    1.356330,1] aps_ts: aps_ts_of_init: using 20MHz clock in ISP mode
  417. [    1.356468,1] aps_ts: aps_ts_of_init: default productid is "Falc"
  418. [    1.356661,1] aps_ts: aps_ts_of_init: waiting 0 msec for UI on reset
  419. [    1.380690,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0xc1300c8, irq:131
  420. [    1.380895,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  421. [    1.381034,0] aps_ts 5-0034: I2C retry 1
  422. [    1.400658,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  423. [    1.400789,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  424. [    1.400985,0] aps_ts 5-0034: I2C retry 2
  425. [    1.420650,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  426. [    1.420848,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  427. [    1.421045,0] aps_ts 5-0034: I2C retry 3
  428. [    1.440656,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  429. [    1.440855,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  430. [    1.440988,0] aps_ts 5-0034: I2C retry 4
  431. [    1.460657,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  432. [    1.460854,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  433. [    1.461051,0] aps_ts 5-0034: I2C retry 5
  434. [    1.480657,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  435. [    1.480854,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  436. [    1.480987,0] aps_ts 5-0034: I2C retry 6
  437. [    1.500656,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  438. [    1.500788,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  439. [    1.500985,0] aps_ts 5-0034: I2C retry 7
  440. [    1.520656,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  441. [    1.520854,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  442. [    1.520986,0] aps_ts 5-0034: I2C retry 8
  443. [    1.540657,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  444. [    1.540789,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  445. [    1.540987,0] aps_ts 5-0034: I2C retry 9
  446. [    1.560657,0] qup_i2c f9927000.i2c: QUP: I2C status flags :0x81343c8, irq:131
  447. [    1.560854,0] qup_i2c f9927000.i2c: I2C slave addr:0x34 not connected
  448. [    1.560986,0] aps_ts 5-0034: I2C retry 10
  449. [    1.580616,0] aps_ts 5-0034: I2C read failed(1 bytes at 0x00b0)
  450. [    1.580722,0] aps_ts: aps_query_device: Failed to read boot mode
  451. [    1.580919,0] aps_ts 5-0034: aps_ts probe failed
  452. [    1.581235,0] synaptics_dsx_of_init: using gpio config
  453. [    1.581437,0] synaptics_dsx_of_init: using normal mode
  454. [    1.680616,0] synaptics_dsx_i2c 5-0020: timed out waiting for reset to complete
  455. [    1.684790,0] synaptics_dsx_i2c 5-0020: synaptics_rmi4_cap_button_map: cap_button_map is                             NULL in board file
  456. [    1.689738,0] input: synaptics_dsx_i2c as /devices/f9927000.i2c/i2c-5/5-0020/input/input2
  457. [    1.690044,0] synaptics_rmi4_query_device: Product: s2316, firmware id: 175833, config id: 13091704
  458. [    1.690228,0] synaptics_rmi4_probe: registered MMI panel notifier
  459. [    1.690920,0] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
  460. [    1.692739,0] input: light-prox as /devices/virtual/input/input3
  461. [    1.694830,0] synaptics_rmi4_fwu_init: F34 version 0
  462. [    1.696136,0] using rtc device, qpnp_rtc, for alarms
  463. [    1.696350,0] qcom,qpnp-rtc qpnp-rtc-e4a59600: rtc core: registered qpnp_rtc as rtc0
  464. [    1.696752,0] i2c /dev entries driver
  465. [    1.702557,0] msm_cci_probe: pdev e4a27e00 device id = -1
  466. [    1.710649,0] imx132_init_module:139 rc -19
  467. [    1.710905,0] imx135_init_module:629
  468. [    1.711656,0] imx135_init_module:634 rc -19
  469. [    1.711836,0] ov8825_init_module:141
  470. [    1.712643,0] ov8825_init_module:146 rc -19
  471. [    1.712822,0] ov8865_init_module:153
  472. [    1.713543,0] ov8865_init_module:158 rc -19
  473. [    1.715760,0] ar0543_init_module:401
  474. [    1.874515,0] ar0543_read_otp_version: cal_ver = 0x1
  475. [    1.903385,0] ar0543_otp_validate_crc: OTP CRC fail(crc_ref = 0x0, crc_otp = 0x0)!
  476. [    1.903584,0] ar0543_read_otp: OTP CRC (rg = 0) fail!
  477. [    1.904197,0] ar0543_auto_otp_read: Unable to locate OTP rt = 0x32!
  478. [    1.904302,0] ar0543_read_otp: Auto read OTP Mod (rt = 0x32) fail!
  479. [    1.904912,0] ar0543_auto_otp_read: Unable to locate OTP rt = 0x34!
  480. [    1.905019,0] ar0543_read_otp: Auto read OTP Mod (rt = 0x34) fail!
  481. [    1.905182,0] ar0543_read_otp_info: Read OTP fail!
  482. [    1.934618,0] ar0543_set_lsc: Setting module LSC!
  483. [    2.098593,0] mt9m114_init_module:1364
  484. [    2.223114,0] ov5693_init_module:141
  485. [    2.223910,0] ov5693_init_module:146 rc -19
  486. [    2.226387,0] __msm_jpeg_init:947] Jpeg Device id 0
  487. [    2.244821,0] lirc_dev: IR Remote Control driver registered, major 236
  488. [    2.245077,0] IR NEC protocol handler initialized
  489. [    2.245173,0] IR RC5(x) protocol handler initialized
  490. [    2.245269,0] IR RC6 protocol handler initialized
  491. [    2.245430,0] IR JVC protocol handler initialized
  492. [    2.245524,0] IR Sony protocol handler initialized
  493. [    2.245683,0] IR RC5 (streamzap) protocol handler initialized
  494. [    2.245781,0] IR SANYO protocol handler initialized
  495. [    2.245941,0] IR MCE Keyboard/mouse protocol handler initialized
  496. [    2.246039,0] IR LIRC bridge handler initialized
  497. [    2.246316,0] usbcore: registered new interface driver uvcvideo
  498. [    2.246422,0] USB Video Class driver (1.1.1)
  499. [    2.247446,0] BMS: qpnp_bms_init: QPNP BMS INIT
  500. [    2.247730,0] spmi qpnp-bms-e4a58200: Driver qcom,qpnp-bms requests probe deferral
  501. [    2.248048,0] qpnp_charger_mmi_battid: Reading Battid at powerup!
  502. [    2.248179,0] qpnp_charger_mmi_battid: Battid = \D0M\E2
  503. [    2.248372,0] spmi qpnp-charger-e4a58000: Driver qcom,qpnp-charger requests probe deferral
  504. [    2.248702,0] qpnp_charger_fac_probe: Not Factory Mode!
  505. [    2.249700,0] lm75 3-0048: hwmon0: sensor 'tmp108'
  506. [    2.250474,0] qpnp_adc_get_devicetree_data: Invalid batt therm type property using Default
  507. [    2.293102,0] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  508. [    2.294040,0] cpuidle: using governor ladder
  509. [    2.294146,0] cpuidle: using governor menu
  510. [    2.294304,0] sdhci: Secure Digital Host Controller Interface driver
  511. [    2.294474,0] sdhci: Copyright(c) Pierre Ossman
  512. [    2.295221,0] mmc0: SDCC Version: 0x00000038
  513. [    2.297866,0] mmc0: bam physical base=0xf9804000
  514. [    2.297972,0] mmc0: bam virtual base=0xe6a98000
  515. [    2.298098,0] sps:BAM 0xf9804000 is registered.
  516. [    2.298262,0] mmc0: BAM device registered. bam_handle=0xe3f39200
  517. [    2.298826,0] sps:BAM 0xf9804000 (va:0xe6a98000) enabled: ver:0x8, number of pipes:6
  518. [    2.299570,0] mmc0: Qualcomm MSM SDCC-BAM at [mem 0xf9804000-0xf980afff flags 0x200] [irq 169 flags 0x400]
  519. [    2.299800,0] mmc0: Qualcomm MSM SDCC-DML [mem 0xf9824800-0xf98248ff flags 0x200]
  520. [    2.300034,0] mmc0: No card detect facilities available
  521. [    2.302916,0] mmc0: Qualcomm MSM SDCC-core [mem 0xf9824000-0xf98247ff flags 0x200] [irq 155 flags 0x400],0 dma -1 dmacrcri -1
  522. [    2.303198,0] mmc0: Controller capabilities: 0x00007ffe
  523. [    2.303365,0] mmc0: 8 bit data mode enabled
  524. [    2.303460,0] mmc0: 4 bit data mode disabled
  525. [    2.303554,0] mmc0: polling status mode disabled
  526. [    2.303715,0] mmc0: MMC clock 400000 -> 200000000 Hz, PCLK 0 Hz
  527. [    2.303813,0] mmc0: Slot eject status = 0
  528. [    2.303971,0] mmc0: Power save feature enable = 1
  529. [    2.304067,0] mmc0: SPS-BAM data transfer mode available
  530. [    2.304648,0] sdhci-pltfm: SDHCI platform and OF driver helper
  531. [    2.305581,0] qcom,leds-qpnp: probe of leds-qpnp-e4a58400 failed with error -10
  532. [    2.305812,0] qcom,leds-qpnp: probe of leds-qpnp-e4a58600 failed with error -10
  533. [    2.306185,0] qcom,leds-qpnp leds-qpnp-e4a59c00: Panel name: mipi_mot_video_cmi_hd_450, version 0x86
  534. [    2.306394,0] qcom,leds-qpnp leds-qpnp-e4a59c00: CABC support enabled
  535. [    2.309261,0] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
  536. [    2.309414,0] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd400000  
  537. [    2.309665,0] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xe6bc0000
  538. [    2.309845,0] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd404000  
  539. [    2.310012,0] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 239.
  540. [    2.310572,0] qce fd400000.qcom,qcedev: Qualcomm Crypto 5.0.2 device found @0xfd400000
  541. [    2.310750,0] qce fd400000.qcom,qcedev: IO base, CE = 0xe6bc0000
  542. [    2.310756,0] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
  543. [    2.310763,0] IO base BAM = 0x0
  544. [    2.310767,0] BAM IRQ 239
  545. [    2.311299,0] sps:BAM 0xfd404000 is registered.
  546. [    2.311684,0] sps:BAM 0xfd404000 (va:0xe6b90000) enabled: ver:0x22, number of pipes:16
  547. [    2.312283,0] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd404000 irq 239
  548. [    2.313572,0] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
  549. [    2.313720,0] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd400000  
  550. [    2.313967,0] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xe6d00000
  551. [    2.314380,0] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd404000  
  552. [    2.314638,0] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 239.
  553. [    2.315528,0] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
  554. [    2.315764,0] QCE50: __qce_init_clk: Unable to get CE core clk
  555. [    2.315934,0] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
  556. [    2.316260,0] qcrypto: probe of fd400000.qcom,qcrypto failed with error -2
  557. [    2.317390,0] usbcore: registered new interface driver usbhid
  558. [    2.317561,0] usbhid: USB HID core driver
  559. [    2.318336,0] zram: Created 1 device(s) ...
  560. [    2.319182,0] ashmem: initialized
  561. [    2.319500,0] logger: created 256K log 'log_main'
  562. [    2.319760,0] logger: created 256K log 'log_events'
  563. [    2.320017,0] logger: created 256K log 'log_radio'
  564. [    2.320334,0] logger: created 256K log 'log_system'
  565. [    2.320620,0] logger: created 256K log 'log_kernel'
  566. [    2.321608,0] sps:BAM 0xf9a44000 is registered.
  567. [    2.321906,0] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  568. [    2.322904,0] input: qpnp_pon as /devices/virtual/input/input4
  569. [    2.323585,0] PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
  570. [    2.324216,0] PMIC@SID0: PM8226 v2.1 options: 0, 0, 2, 2
  571. [    2.324806,0] usbcore: registered new interface driver snd-usb-audio
  572. [    2.327831,0] tpa6165a2 probed successfully
  573. [    2.329150,0] i2c-core: driver [tpa6165a2] using legacy suspend method
  574. [    2.330635,1] i2c-core: driver [tpa6165a2] using legacy resume method
  575. [    2.334196,0] tpa6165_initialize success
  576. [    2.344512,1] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
  577. [    2.345691,1] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  578. [    2.347191,1] platform qcom,msm-voip-dsp.50: Driver msm-voip-dsp requests probe deferral
  579. [    2.348076,1] platform qcom,msm-pcm-voice.51: Driver msm-pcm-voice requests probe deferral
  580. [    2.353626,1] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  581. [    2.354020,1] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  582. [    2.355327,1] oprofile: using timer interrupt.
  583. [    2.355573,1] Netfilter messages via NETLINK v0.30.
  584. [    2.355785,1] nfnl_acct: registering with nfnetlink.
  585. [    2.355969,1] nf_conntrack version 0.5.0 (13819 buckets, 55276 max)
  586. [    2.356884,1] ctnetlink v0.93: registering with nfnetlink.
  587. [    2.357061,1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  588. [    2.357235,1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  589. [    2.357570,1] xt_time: kernel timezone is -0000
  590. [    2.358302,1] ip_tables: (C) 2000-2006 Netfilter Core Team
  591. [    2.358721,1] arp_tables: (C) 2002 David S. Miller
  592. [    2.358980,1] TCP: cubic registered
  593. [    2.359102,1] Initializing XFRM netlink socket
  594. [    2.359917,1] NET: Registered protocol family 10
  595. [    2.363597,1] Mobile IPv6
  596. [    2.363770,1] ip6_tables: (C) 2000-2006 Netfilter Core Team
  597. [    2.364241,1] IPv6 over IPv4 tunneling driver
  598. [    2.365667,1] NET: Registered protocol family 17
  599. [    2.365833,1] NET: Registered protocol family 15
  600. [    2.366101,1] Bridge firewalling registered
  601. [    2.366236,1] Ebtables v2.0 registered
  602. [    2.366593,1] Bluetooth: RFCOMM TTY layer initialized
  603. [    2.366802,1] Bluetooth: RFCOMM socket layer initialized
  604. [    2.366906,1] Bluetooth: RFCOMM ver 1.11
  605. [    2.367064,1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  606. [    2.367162,1] Bluetooth: BNEP filters: protocol multicast
  607. [    2.367350,1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  608. [    2.367565,1] L2TP core driver, V2.0
  609. [    2.367730,1] Registering the dns_resolver key type
  610. [    2.369168,1] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
  611. [    2.369480,1] Registering SWP/SWPB emulation handler
  612. [    2.373844,0] mmc0: BKOPS_EN bit = 0
  613. [    2.379457,1] registered taskstats version 1
  614. [    2.380281,0] sps:BAM 0xf9804000 (va:0xe6a98000) enabled: ver:0x8, number of pipes:6
  615. [    2.380889,0] sps:BAM 0xf9804000 (va:0xe6a98000) enabled: ver:0x8, number of pipes:6
  616. [    2.382162,0] mmc0: new HS200 MMC card at address 0001
  617. [    2.382950,0] mmcblk0: mmc0:0001 008G92 7.28 GiB
  618. [    2.383315,0] mmcblk0rpmb: mmc0:0001 008G92 partition 3 512 KiB
  619. [    2.386060,0]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36
  620. [    2.394085,0] apanic: Bound to mmc block device 'mmcblk0p35(259:3)'
  621. [    2.394208,0] apanic: c(1024, 58551) t(60928, 81489) a(60416, 152)
  622. [    2.400512,1] AppArmor: AppArmor sha1 policy hashing enabled
  623. [    2.400825,1] tps65132: incomplete constraints, leaving on
  624. [    2.401000,1] vddio_disp: incomplete constraints, leaving on
  625. [    2.401214,1] NOHZ: local_softirq_pending 40
  626. [    2.402115,0] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  627. [    2.402862,0] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  628. [    2.403897,0] qpnp_charger_mmi_battid: Reading Battid at powerup!
  629. [    2.404101,0] qpnp_charger_mmi_battid: Battid = \D0M\E2
  630. [    2.408828,0] of_batterydata_read_data: BMS Table Found using mmi,ed30-lg-batterydata
  631. [    2.409054,0] qpnp_chg_load_battery_data: batt_id = 1173925 uV, max_voltage = 4350000 uV, term_curr = 159000 uA
  632. [    2.409817,0] batfet:
  633. [    2.410187,0] 8226_smbbp_boost: 5000 mV
  634. [    2.410703,0] 8226_smbbp_otg:
  635. [    2.410924,0] 8226_smbbp_otg: supplied by 8226_smbbp_boost
  636. [    2.426529,0] msm_otg f9a55000.usb: Vbus state = 1
  637. [    2.426934,0] msm_otg f9a55000.usb: Vbus state = 1
  638. [    2.427179,0] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
  639. [    2.464998,0] of_batterydata_read_data: BMS Table Found using mmi,ed30-lg-batterydata
  640. [    2.465221,0] BMS: read_shutdown_soc: stored soc = 0x58, shutdown_soc = 43
  641. [    2.927860,0] BMS: qpnp_bms_probe: probe success: soc =43 vbatt = 3817015 ocv = 3817000 r_sense_uohm = 10000 warm_reset = 0
  642. [    2.929076,0] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  643. [    2.929557,0] msm_otg f9a55000.usb: phy_reset: success
  644. [    2.930111,0] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  645. [    2.932270,0] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  646. [    2.933149,1] input: gpio-keys as /devices/gpio_keys.76/input/input5
  647. [    2.933173,0] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  648. [    2.934116,1] qcom,qpnp-rtc qpnp-rtc-e4a59600: setting system clock to 1970-03-06 07:51:08 UTC (5557868)
  649. [    2.934438,0] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  650. [    2.935260,0] platform sound-9302.43: Driver msm8226-asoc-tapan requests probe deferral
  651. [    2.935801,1] persistent_ram: merged ext buf size 652
  652. [    2.936107,1] clock_late_init: Removing enables held for handed-off clocks
  653. [    2.936346,0] platform sound.42: Driver msm8226-asoc-tapan requests probe deferral
  654. [    2.942211,1] ALSA device list:
  655. [    2.942314,1]   No soundcards found.
  656. [    2.942628,1] Freeing init memory: 80K
  657. [    2.942798,1] Write protecting the kernel text section c0008000 - c0d29000
  658. [    3.160846,0] msm_otg f9a55000.usb: chg_type = USB_SDP_CHARGER
  659. [    3.162870,0] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  660. [    3.551229,1] NOHZ: local_softirq_pending 200
  661. [    4.346743,3] initrd: checking filesystem integrity for the userdata partition
  662. [    4.354707,3] EXT3-fs (mmcblk0p36): error: couldn't mount because of unsupported optional features (40)
  663. [    4.361487,3] EXT2-fs (mmcblk0p36): error: couldn't mount because of unsupported optional features (40)
  664. [    4.375931,1] EXT4-fs (mmcblk0p36): mounted filesystem with ordered data mode. Opts: errors=remount-ro
  665. [    4.414996,0] initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
  666. [    4.415256,0] initrd: mounting /dev/mmcblk0p36
  667. [    4.420359,2] EXT3-fs (mmcblk0p36): error: unrecognized mount option "discard" or missing value
  668. [    4.441485,0] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
  669. [    4.445913,1] EXT4-fs (mmcblk0p36): mounted filesystem with journalled data mode. Opts: discard,data=journal
  670. [    4.450505,3] initrd: boot mode: ubuntu
  671. [    4.463060,2] EXT2-fs (loop0): warning: mounting unchecked fs, running e2fsck is recommended
  672. [    4.464597,2] initrd: mounting system.img (user mode)
  673. [    4.488778,1] initrd: mounting device image as ro
  674. [    4.497814,1] EXT3-fs (loop1): error: couldn't mount because of unsupported optional features (40)
  675. [    4.511504,0] EXT2-fs (loop1): error: couldn't mount because of unsupported optional features (40)
  676. [    4.533764,1] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
  677. [    4.542999,1] initrd: device is falcon
  678. [    5.189122,1] NOHZ: local_softirq_pending 200
  679. [    5.189579,1] NOHZ: local_softirq_pending 240
  680. [    5.670965,2] initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
  681. [    5.743353,2] initrd: checking mount label cache
  682. [    5.744960,3] initrd: mounting /dev/disk/by-partlabel/cache as /root/android//cache
  683. [    5.755819,1] EXT4-fs (mmcblk0p33): mounted filesystem with writeback data mode. Opts: data=writeback,noauto_da_alloc,barrier=1
  684. [    5.770830,0] initrd: checking mount label fsg
  685. [    5.772415,1] initrd: mounting /dev/disk/by-partlabel/fsg as /root/android//fsg
  686. [    5.778066,1] EXT4-fs (mmcblk0p21): mounted filesystem without journal. Opts: barrier=0
  687. [    5.793060,1] initrd: checking mount label modem
  688. [    5.794597,2] initrd: mounting /dev/disk/by-partlabel/modem as /root/android//firmware
  689. [    5.803337,0] EXT4-fs (mmcblk0p1): barriers disabled
  690. [    5.804190,0] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: barrier=0
  691. [    5.819119,3] initrd: checking mount label persist
  692. [    5.820734,0] initrd: mounting /dev/disk/by-partlabel/persist as /root/android//persist
  693. [    5.829138,1] EXT4-fs (mmcblk0p29): recovery complete
  694. [    5.829357,1] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: (null)
  695. [    5.844323,0] initrd: checking mount label boot
  696. [    5.845953,1] initrd: mounting /dev/disk/by-partlabel/boot as /root/android//boot
  697. [    5.868875,2] initrd: checking mount label recovery
  698. [    5.870512,3] initrd: mounting /dev/disk/by-partlabel/recovery as /root/android//recovery
  699. [    5.902735,3] initrd: checking mount label msm_hsusb_host
  700. [    5.917754,2] initrd: checking mount label zram0
  701. [    5.919533,3] initrd: mounting /dev/zram0 as /root/android/none
  702. [    5.928623,3] initrd: mounting /root/var/lib/lxc/android/system.img as /root/android/system
  703. [    6.267220,2] functions_store: android_usb: Setting functions to mtp,adb
  704. [    6.267232,2]
  705. [    6.267629,2] enable_store: android_usb: trying to enable
  706. [    6.278306,1] init: Failed to spawn adbd main process: unable to execute: No such file or directory
  707. [    6.314000,2] init: ureadahead-touch main process (681) terminated with status 5
  708. [    7.389194,0] init: /init.qcom.rc: 651: invalid service name 'moto_charge_only_mode'
  709. [    7.391762,0] init: could not import file '/init.carrier.rc' from '/init.rc'
  710. [    7.392024,0] init: could not import file '/init.cm.rc' from '/init.rc'
  711. [    7.393426,0] init: do_chown: Could not access /selinux/booleans
  712. [    7.393747,0] init: do_chown: Could not access /sys/fs/selinux/booleans
  713. [    7.395930,3] init: invalid uid 'fingerp'
  714. [    7.396158,3] init: invalid uid 'smartcard'
  715. [    7.869538,0] init: cannot open '/initlogo.rle'
  716. [    8.620963,1] diag: In diag_send_msg_mask_update, invalid status 0
  717. [    8.622040,1] diag: In diag_send_log_mask_update, invalid status 0
  718. [    8.750140,0] tapan-slim tapan-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@fe12f000/tapan_codec failed
  719. [    8.750412,0] tapan-slim tapan-slim-pgd: Looking up qcom,cdc-dmic-sample-rate property in node /soc/slim@fe12f000/tapan_codec failed
  720. [    9.056633,2] msm8226-asoc-tapan sound-9302.43: Looking up qcom, cdc-lineout-spkr-gpios property in node /soc/sound-9302 failed -22
  721. [    9.056906,2] msm8226-asoc-tapan sound-9302.43: Looking up fih, cdc-lineout-topspkr-gpios property in node /soc/sound-9302 failed -22
  722. [    9.057174,2] msm8226-asoc-tapan sound-9302.43: Looking up fih, cdc-lineout-botspkr-gpios property in node /soc/sound-9302 failed -22
  723. [    9.057424,2] msm8226-asoc-tapan sound-9302.43: Looking up fih,cdc-spk-rcv-sel-gpios property in node /soc/sound-9302 failed -22
  724. [    9.057689,2] msm8226-asoc-tapan sound-9302.43: msm8226_setup_hs_jack: Failed to request tapan us-euro gpio -22
  725. [    9.058929,2] msm8226-asoc-tapan sound.42: msm8226_prepare_codec_mclk: Failed to request tapan mclk gpio 440
  726. [   10.757338,3] init: Detected MSM SOC ID=158 SOC VER=0 BOARD TYPE=Unknown
  727. [   10.954662,1] init: failed to open '/sys/class/graphics/fb1/msm_fb_type'
  728. [   10.954957,1] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
  729. [   10.956359,1] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
  730. [   10.956618,1] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
  731. [   11.023666,2] healthd: wakealarm_init: timerfd_create failed
  732. [   16.712053,2] diag: In diag_send_msg_mask_update, invalid status 0
  733. [   16.712267,2] diag: In diag_send_log_mask_update, invalid status 0
  734. [   18.388199,0] wcnss: no space available for smd frame
  735. [   18.410754,0] wcnss: no space available for smd frame
  736. [   18.440747,0] wcnss: no space available for smd frame
  737. [   18.470803,0] wcnss: no space available for smd frame
  738. [   22.570690,2] Notify: smsm init
  739. [   22.705386,0] msm_ipc_router_send_control_msg: xprt_info not initialized
  740. [   23.078178,0] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  741. [   23.123621,0] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  742. [   23.143340,0] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  743. [   23.144956,0] [rev_rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  744. [   23.146344,0] [rev_rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  745. [   23.174790,0] [rev_rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  746. [   23.176565,0] [rev_rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  747. [   23.178186,0] [rev_rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  748. [   23.212203,0] [rev_rmnet8] error: rmnet_ioct called for unsupported cmd[35585]
  749. [   23.213856,0] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  750. [   23.254404,0] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  751. [   23.256018,0] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  752. [   23.257417,0] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  753. [   23.282223,0] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  754. [   23.283854,0] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  755. [   23.285408,0] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  756. [   23.287066,0] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  757. [   23.288701,0] [rmnet_usb0] error: rmnet_ioct called for unsupported cmd[35585]
  758. [   23.479832,0] diag: In diag_send_msg_mask_update, invalid status 0
  759. [   23.480056,0] diag: In diag_send_log_mask_update, invalid status 0
  760. [   23.942786,0] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  761. [   23.943625,0] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  762. [   23.944310,0] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  763. [   23.981364,0] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  764. [   23.982073,0] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  765. [   23.982775,0] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  766. [   23.989909,0] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  767. [   23.991125,0] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  768. [   23.991876,0] [rmnet_usb0] error: rmnet_ioct called for unsupported cmd[35585]
  769. [   23.992606,0] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  770. [   23.993267,0] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  771. [   24.021065,0] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  772. [   24.021877,0] [rev_rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  773. [   24.022518,0] [rev_rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  774. [   24.023231,0] [rev_rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  775. [   24.023948,0] [rev_rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  776. [   24.024587,0] [rev_rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  777. [   24.025302,0] [rev_rmnet8] error: rmnet_ioct called for unsupported cmd[35585]
  778. [   24.035154,0] [rmnet0] error: rmnet_ioct called for unsupported cmd[35143]
  779. [   24.036193,0] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  780. [   24.037790,0] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  781. [   24.039287,0] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  782. [   24.041857,0] [rmnet1] error: rmnet_ioct called for unsupported cmd[35143]
  783. [   24.042790,0] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  784. [   24.044242,0] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  785. [   24.045671,0] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  786. [   24.047759,0] [rmnet2] error: rmnet_ioct called for unsupported cmd[35143]
  787. [   24.048686,0] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  788. [   24.050158,0] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  789. [   24.052137,0] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  790. [   24.054566,0] [rmnet3] error: rmnet_ioct called for unsupported cmd[35143]
  791. [   24.055490,0] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  792. [   24.057065,0] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  793. [   24.058555,0] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  794. [   24.061096,0] [rmnet4] error: rmnet_ioct called for unsupported cmd[35143]
  795. [   24.062034,0] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  796. [   24.063450,0] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  797. [   24.064943,0] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  798. [   24.067086,0] [rmnet5] error: rmnet_ioct called for unsupported cmd[35143]
  799. [   24.067951,0] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  800. [   24.931335,0] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  801. [   24.932659,0] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  802. [   24.934384,0] [rmnet6] error: rmnet_ioct called for unsupported cmd[35143]
  803. [   24.935164,0] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  804. [   24.936477,0] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  805. [   24.937718,0] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  806. [   24.939360,0] [rmnet7] error: rmnet_ioct called for unsupported cmd[35143]
  807. [   24.940113,0] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  808. [   24.971886,0] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  809. [   24.973455,0] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  810. [   24.996356,0] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35143]
  811. [   24.997349,0] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  812. [   24.998788,0] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  813. [   25.014014,0] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  814. [   25.041512,0] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35143]
  815. [   25.042908,0] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  816. [   25.044531,0] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  817. [   25.091381,0] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  818. [   25.093974,0] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35143]
  819. [   25.095121,0] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  820. [   25.112069,0] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  821. [   25.113798,0] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  822. [   25.121341,0] [rev_rmnet3] error: rmnet_ioct called for unsupported cmd[35143]
  823. [   25.123174,0] [rev_rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  824. [   25.124667,0] [rev_rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  825. [   25.157567,0] [rev_rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  826. [   25.180954,0] [rev_rmnet4] error: rmnet_ioct called for unsupported cmd[35143]
  827. [   25.182283,0] [rev_rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  828. [   25.183790,0] [rev_rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  829. [   25.201426,0] [rev_rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  830. [   25.220938,0] [rev_rmnet5] error: rmnet_ioct called for unsupported cmd[35143]
  831. [   25.222094,0] [rev_rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  832. [   25.223623,0] [rev_rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  833. [   25.242233,0] [rev_rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  834. [   25.244763,0] [rev_rmnet6] error: rmnet_ioct called for unsupported cmd[35143]
  835. [   25.252328,0] [rev_rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  836. [   25.253924,0] [rev_rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  837. [   25.282540,0] [rev_rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  838. [   25.302831,0] [rev_rmnet7] error: rmnet_ioct called for unsupported cmd[35143]
  839. [   25.304514,0] [rev_rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  840. [   25.306071,0] [rev_rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  841. [   25.307914,0] [rev_rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  842. [   25.343111,0] [rev_rmnet8] error: rmnet_ioct called for unsupported cmd[35143]
  843. [   25.344223,0] [rev_rmnet8] error: rmnet_ioct called for unsupported cmd[35585]
  844. [   25.345841,0] [rev_rmnet8] error: rmnet_ioct called for unsupported cmd[35585]
  845. [   25.372437,0] [rev_rmnet8] error: rmnet_ioct called for unsupported cmd[35585]
  846. [   50.150648,1] mdss_dsi_cmds_rx: failed to call
  847. [   80.230638,1] mdss_dsi_cmds_rx: failed to call
  848. [  110.990635,1] mdss_dsi_cmds_rx: failed to call
  849. [  139.239917,0] System halted.
  850.  
  851. PREV
  852. Linux version 3.4.42-g3f34512-dirty (louis@louis-All-Series) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Sun Jun 14 19:18:25 CEST 2015
  853.  
  854. THIS
  855. ABOOT.GIT = MBM-NG-V41.18-0-g99084d5
  856. TZ.GIT = MBM-NG-V41.18-0-g99c1a7c
  857. RPM.GIT = MBM-NG-V41.18-0-gcecd6e9
  858. SBL1.GIT = MBM-NG-V41.18-0-g5742832
  859. SDI.GIT = MBM-NG-V41.18-0-gdc5aeaf
  860. Linux version 3.4.42-g5a35e4a (louis@louis-System-Product-Name) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Apr 6 09:36:16 CEST 2015
  861. RAM: Samsung, S4 SDRAM, 1024 MB, MR5:0x01, MR6:0x11, MR7:0x00, MR8:0x18
  862. socinfo: id=158, ver=2.0, raw_id=2048, raw_ver=1, hw_plat=0, hw_plat_ver=0, hw_plat_subtype=0
  863. ACPU: Speed bin 0 PVS version 2
  864.  
  865. No errors detected
  866.  
  867.  
  868. Boot info:
  869. Last boot reason: hardware_reset
  870. \00console=null androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 vmalloc=400M utags.blkdev=/dev/block/platform/msm_sdcc.1/by-name/utags androidboot.write_protect=0 androidboot.emmc=true androidboot.serialno=TA883031EV androidboot.baseband=msm androidboot.mode=normal androidboot.device=falcon androidboot.hwrev=0x83C0 androidboot.radio=0x1 androidboot.powerup_reason=0x00100000 bootreason=hardware_reset androidboot.write_protect=0 restart.download_mode=0 androidboot.fsg-id= androidboot.secure_hardware=1 androidboot.cid=0x7 androidboot.bootloader=0x4118 androidboot.carrier= mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_mot_cmi_720p_video_v2
RAW Paste Data
Top