Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2011.06 (Feb 22 2012 - 04:24:47)
- Promwad-PlugComputer
- SoC: Kirkwood 88F6282_?? RevID 0x01
- DRAM: 1 GiB
- NAND: 1024 MiB
- In: serial
- Out: serial
- Err: serial
- Net: egiga0, egiga1
- 88E1121 Initialized on egiga0, devadr 1
- 88E1121 Initialized on egiga1, devadr 0
- Hit any key to stop autoboot: 0
- (Re)start USB...
- USB: Register 10011 NbrPorts 1
- USB EHCI 1.00
- scanning bus for devices... 4 USB Device(s) found
- scanning bus for storage devices... 1 Storage Device(s) found
- Loading file "/boot/uImage" from usb device 0:1 (usbda1)
- 5447343 bytes read
- ## Booting kernel from Legacy Image at 06400000 ...
- Image Name: Linux-5.13.6-kirkwood-tld-1
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 5447279 Bytes = 5.2 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000][ T0] Booting Linux on physical CPU 0x0
- [ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
- [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
- [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000][ T0] OF: fdt: Machine model: Plat'Home OpenBlocksA7
- [ 0.000000][ T0] Memory policy: Data cache writeback
- [ 0.000000][ T0] Zone ranges:
- [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Movable zone start for each node
- [ 0.000000][ T0] Early memory node ranges
- [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 260096
- [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=/dev/sda1 ubi.mtd=3 rw noinitrd rootdelay=5 rootfstype=ext3 rootwait usbcore.authorized_default=1
- [ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.000000][ T0] Memory: 1020216K/1048576K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 28360K reserved, 0K cma-reserved)
- [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
- [ 0.000000][ T0] trace event string verifier disabled
- [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
- [ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
- [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
- [ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
- [ 0.000050][ T0] Switching to timer-based delay loop, resolution 5ns
- [ 0.000926][ T0] Console: colour dummy device 80x30
- [ 0.000986][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
- [ 0.001019][ T0] pid_max: default: 32768 minimum: 301
- [ 0.001401][ T0] LSM: Security Framework initializing
- [ 0.001553][ T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.001592][ T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.002864][ T0] CPU: Testing write buffer coherency: ok
- [ 0.004431][ T1] Setting up static identity map for 0x100000 - 0x100058
- [ 0.004728][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
- [ 0.004954][ T1] rcu: Hierarchical SRCU implementation.
- [ 0.006312][ T1] devtmpfs: initialized
- [ 0.011946][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.011995][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.056802][ T1] prandom32: self test passed (less than 6 bits correlated)
- [ 0.056836][ T1] prandom: seed boundary self test passed
- [ 0.061895][ T1] prandom: 100 self tests passed
- [ 0.061916][ T1] pinctrl core: initialized pinctrl subsystem
- [ 0.063201][ T1] NET: Registered protocol family 16
- [ 0.064177][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.065068][ T1] audit: initializing netlink subsys (disabled)
- [ 0.066131][ T1] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.066412][ T16] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
- [ 0.066528][ T1] cpuidle: using governor ladder
- [ 0.066590][ T1] cpuidle: using governor menu
- [ 0.067255][ T1] [Firmware Bug]: Feroceon L2: bootloader left the L2 cache on!
- [ 0.067281][ T1] Feroceon L2: Cache support initialised.
- [ 0.079599][ T1] No ATAGs?
- [ 2.560060][ C0] random: fast init done
- [ 5.916854][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
- [ 5.947522][ T59] wait_for_initramfs() called before rootfs_initcalls
- [ 6.140354][ T1] raid6: int32x8 gen() 93 MB/s
- [ 6.310246][ T1] raid6: int32x8 xor() 57 MB/s
- [ 6.480183][ T1] raid6: int32x4 gen() 90 MB/s
- [ 6.650172][ T1] raid6: int32x4 xor() 59 MB/s
- [ 6.820215][ T1] raid6: int32x2 gen() 117 MB/s
- [ 6.990199][ T1] raid6: int32x2 xor() 71 MB/s
- [ 7.160263][ T1] raid6: int32x1 gen() 82 MB/s
- [ 7.330164][ T1] raid6: int32x1 xor() 49 MB/s
- [ 7.330186][ T1] raid6: using algorithm int32x2 gen() 117 MB/s
- [ 7.330203][ T1] raid6: .... xor() 71 MB/s, rmw enabled
- [ 7.330218][ T1] raid6: using intx1 recovery algorithm
- [ 7.330526][ T1] vgaarb: loaded
- [ 7.331194][ T1] SCSI subsystem initialized
- [ 7.331843][ T1] usbcore: registered new interface driver usbfs
- [ 7.331933][ T1] usbcore: registered new interface driver hub
- [ 7.332004][ T1] usbcore: registered new device driver usb
- [ 7.332272][ T1] pps_core: LinuxPPS API ver. 1 registered
- [ 7.332294][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 7.332337][ T1] PTP clock support registered
- [ 7.334713][ T1] clocksource: Switched to clocksource orion_clocksource
- [ 7.455475][ T1] VFS: Disk quotas dquot_6.6.0
- [ 7.455602][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 7.479735][ T1] NET: Registered protocol family 2
- [ 7.480027][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 7.482156][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 7.482243][ T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 7.482399][ T1] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 7.482523][ T1] TCP: Hash tables configured (established 8192 bind 8192)
- [ 7.482873][ T1] MPTCP token hash table entries: 1024 (order: 1, 12288 bytes, linear)
- [ 7.482988][ T1] UDP hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 7.483055][ T1] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 7.483345][ T1] NET: Registered protocol family 1
- [ 7.484240][ T1] RPC: Registered named UNIX socket transport module.
- [ 7.484268][ T1] RPC: Registered udp transport module.
- [ 7.484284][ T1] RPC: Registered tcp transport module.
- [ 7.484298][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 7.484320][ T1] PCI: CLS 0 bytes, default 32
- [ 7.484692][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 9.269235][ T1] Initialise system trusted keyrings
- [ 9.269314][ T1] Key type blacklist registered
- [ 9.269614][ T1] workingset: timestamp_bits=30 max_order=18 bucket_order=0
- [ 9.269779][ T1] zbud: loaded
- [ 9.271527][ T1] NFS: Registering the id_resolver key type
- [ 9.271578][ T1] Key type id_resolver registered
- [ 9.271596][ T1] Key type id_legacy registered
- [ 9.271654][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 9.271686][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 9.271705][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 9.272034][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 9.272596][ T1] fuse: init (API version 7.34)
- [ 9.273089][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
- [ 9.273356][ T1] orangefs_init: module version upstream loaded
- [ 9.273381][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
- [ 9.399112][ T1] xor: measuring software checksum speed
- [ 9.409835][ T1] arm4regs : 928 MB/sec
- [ 9.427624][ T1] 8regs : 556 MB/sec
- [ 9.439850][ T1] 32regs : 810 MB/sec
- [ 9.439873][ T1] xor: using function: arm4regs (928 MB/sec)
- [ 9.439900][ T1] async_tx: api initialized (async)
- [ 9.439924][ T1] Key type asymmetric registered
- [ 9.439941][ T1] Asymmetric key parser 'x509' registered
- [ 9.440015][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 9.440109][ T1] io scheduler bfq registered
- [ 9.679777][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
- [ 9.682555][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
- [ 9.746022][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
- [ 9.749109][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
- [ 9.806028][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
- [ 9.809474][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 9.811138][ T1] printk: console [ttyS0] disabled
- [ 9.811257][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A
- [ 10.656802][ T1] printk: console [ttyS0] enabled
- [ 10.662719][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 26, base_baud = 12500000) is a 16550A
- [ 10.683122][ T1] loop: module loaded
- [ 10.687789][ T1] sata_mv f1080000.sata: slots 32 ports 1
- [ 10.696016][ T1] scsi host0: sata_mv
- [ 10.700229][ T1] ata1: SATA max UDMA/133 irq 34
- [ 10.706233][ T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
- [ 10.713394][ T1] nand: Samsung NAND 1GiB 3,3V 8-bit
- [ 10.718597][ T1] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 10.727376][ T1] Scanning device for bad blocks
- [ 10.826492][ T1] Bad eraseblock 1045 at 0x0000082a0000
- [ 10.884144][ T1] Bad eraseblock 1625 at 0x00000cb20000
- [ 11.028503][ T1] Bad eraseblock 3159 at 0x000018ae0000
- [ 11.039051][ T94] ata1: SATA link down (SStatus 0 SControl F300)
- [ 11.148564][ T1] Bad eraseblock 4359 at 0x0000220e0000
- [ 11.154504][ T1] Bad eraseblock 4365 at 0x0000221a0000
- [ 11.425058][ T1] Bad eraseblock 7305 at 0x000039120000
- [ 11.500453][ T1] Bad eraseblock 8082 at 0x00003f240000
- [ 11.515817][ T1] 6 fixed-partitions partitions found on MTD device orion_nand
- [ 11.523264][ T1] Creating 6 MTD partitions on "orion_nand":
- [ 11.529164][ T1] 0x000000000000-0x0000001c0000 : "uboot"
- [ 11.536689][ T1] 0x0000001c0000-0x000000480000 : "env"
- [ 11.543903][ T1] 0x000000480000-0x0000005e0000 : "test"
- [ 11.551216][ T1] 0x0000005e0000-0x000000b20000 : "conf"
- [ 11.558558][ T1] 0x000000b20000-0x000004860000 : "linux"
- [ 11.566314][ T1] 0x000004860000-0x000010000000 : "user"
- [ 11.575235][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
- [ 11.583825][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- [ 11.595723][ T1] libphy: Fixed MDIO Bus: probed
- [ 11.602365][ T1] libphy: orion_mdio_bus: probed
- [ 11.610614][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
- [ 11.696237][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:e1:75:82:1b:06
- [ 11.786177][ T1] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:e1:75:82:1b:07
- [ 11.795854][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 11.803156][ T1] ehci-pci: EHCI PCI platform driver
- [ 11.808430][ T1] ehci-orion: EHCI orion driver
- [ 11.813399][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
- [ 11.819693][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
- [ 11.828415][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
- [ 11.864757][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
- [ 11.871886][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
- [ 11.880942][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 11.888936][ T1] usb usb1: Product: EHCI Host Controller
- [ 11.894545][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
- [ 11.902007][ T1] usb usb1: SerialNumber: f1050000.ehci
- [ 11.908298][ T1] hub 1-0:1.0: USB hub found
- [ 11.912830][ T1] hub 1-0:1.0: 1 port detected
- [ 11.918470][ T1] usbcore: registered new interface driver usb-storage
- [ 11.925807][ T1] mousedev: PS/2 mouse device common for all mice
- [ 11.933350][ T1] rtc-mv f1010300.rtc: registered as rtc0
- [ 11.939072][ T1] rtc-mv f1010300.rtc: setting system clock to 2022-11-06T18:39:36 UTC (1667759976)
- [ 11.948743][ T1] i2c /dev entries driver
- [ 11.954973][ T1] device-mapper: uevent: version 1.0.3
- [ 11.960643][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
- [ 11.970378][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
- [ 11.977723][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
- [ 11.985115][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
- [ 11.992542][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
- [ 11.999398][ T1] device-mapper: raid: Loading target version 1.15.1
- [ 12.007944][ T1] hid: raw HID events driver (C) Jiri Kosina
- [ 12.014278][ T1] drop_monitor: Initializing network drop monitor service
- [ 12.021906][ T1] NET: Registered protocol family 10
- [ 12.028935][ T1] Segment Routing with IPv6
- [ 12.033332][ T1] RPL Segment Routing with IPv6
- [ 12.038281][ T1] NET: Registered protocol family 17
- [ 12.043725][ T1] Key type dns_resolver registered
- [ 12.049615][ T1] registered taskstats version 1
- [ 12.054449][ T1] Loading compiled-in X.509 certificates
- [ 12.060688][ T1] zswap: loaded using pool lzo/zbud
- [ 12.066271][ T1] Key type ._fscrypt registered
- [ 12.071011][ T1] Key type .fscrypt registered
- [ 12.075750][ T1] Key type fscrypt-provisioning registered
- [ 12.083800][ T1] Key type big_key registered
- [ 12.093320][ T1] Key type encrypted registered
- [ 12.101477][ T1] ubi0: attaching mtd3
- [ 12.112929][ T1] ubi0: scanning is finished
- [ 12.127783][ T1] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 38, need 160
- [ 12.139380][ T1] ubi0: attached mtd3 (name "conf", size 5 MiB)
- [ 12.145597][ T1] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
- [ 12.153222][ T1] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
- [ 12.160701][ T1] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
- [ 12.168250][ T1] ubi0: good PEBs: 42, bad PEBs: 0, corrupted PEBs: 0
- [ 12.174931][ T1] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
- [ 12.182896][ T1] ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 3322921700
- [ 12.192807][ T1] ubi0: available PEBs: 0, total reserved PEBs: 42, PEBs reserved for bad PEB handling: 38
- [ 12.202726][ T111] ubi0: background thread "ubi_bgt0d" started, PID 111
- [ 12.209528][ T102] usb 1-1: new high-speed USB device number 2 using orion-ehci
- [ 12.217571][ T1] Waiting 5 sec before mounting root device...
- [ 12.415313][ T102] usb 1-1: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 0.00
- [ 12.424270][ T102] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 12.433042][ T102] hub 1-1:1.0: USB hub found
- [ 12.437805][ T102] hub 1-1:1.0: 4 ports detected
- [ 12.754747][ T102] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
- [ 12.905434][ T102] usb 1-1.2: New USB device found, idVendor=2001, idProduct=f103, bcdDevice= 1.00
- [ 12.914558][ T102] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 12.923559][ T102] hub 1-1.2:1.0: USB hub found
- [ 12.928430][ T102] hub 1-1.2:1.0: 7 ports detected
- [ 13.254749][ T102] usb 1-1.2.1: new high-speed USB device number 4 using orion-ehci
- [ 13.411179][ T102] usb 1-1.2.1: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
- [ 13.420492][ T102] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 13.428758][ T102] usb 1-1.2.1: Product: DataTraveler 2.0
- [ 13.434298][ T102] usb 1-1.2.1: Manufacturer: Kingston
- [ 13.439585][ T102] usb 1-1.2.1: SerialNumber: 000
- [ 13.447168][ T102] usb-storage 1-1.2.1:1.0: USB Mass Storage device detected
- [ 13.455134][ T102] scsi host1: usb-storage 1-1.2.1:1.0
- [ 14.508175][ T7] scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
- [ 16.808613][ T81] sd 1:0:0:0: [sda] 30728832 512-byte logical blocks: (15.7 GB/14.7 GiB)
- [ 16.817472][ T81] sd 1:0:0:0: [sda] Write Protect is off
- [ 16.823470][ T81] sd 1:0:0:0: [sda] No Caching mode page found
- [ 16.829556][ T81] sd 1:0:0:0: [sda] Assuming drive cache: write through
- [ 16.862621][ T81] sda: sda1
- [ 16.869229][ T81] sd 1:0:0:0: [sda] Attached SCSI removable disk
- [ 17.284757][ T1] md: Waiting for all devices to be available before autodetect
- [ 17.292294][ T1] md: If you don't use raid, use raid=noautodetect
- [ 17.298858][ T1] md: Autodetecting RAID arrays.
- [ 17.303683][ T1] md: autorun ...
- [ 17.307219][ T1] md: ... autorun DONE.
- [ 17.730255][ T1] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
- [ 17.970530][ T1] EXT4-fs (sda1): recovery complete
- [ 17.980236][ T1] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
- [ 17.990414][ T1] VFS: Mounted root (ext3 filesystem) on device 8:1.
- [ 18.007287][ T1] devtmpfs: mounted
- [ 18.014534][ T1] Freeing unused kernel memory: 1024K
- [ 18.020977][ T1] Checked W+X mappings: passed, no W+X pages found
- [ 18.027438][ T1] Run /sbin/init as init process
- INIT: version 2.96 booting
- Using makefile-style concurrent boot in runlevel S.
- Files under mount point '/run' will be hidden. ... (warning).
- Starting hotplug events dispatcher: systemd-udevd.
- Synthesizing the initial hotplug events (subsystems)...done.
- Synthesizing the initial hotplug events (devices)...done.
- Waiting for /dev to be fully populated...[ 23.047155][ T294] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- [ 23.628759][ T290] at24 1-0050: supply vcc not found, using dummy regulator
- [ 23.651480][ T298] orion_wdt: Initial timeout 21 sec
- [ 24.185099][ T290] usbcore: registered new interface driver uas
- [ 24.358317][ T292] marvell-cesa f1030000.crypto: CESA device successfully registered
- [ 24.406128][ T290] sd 1:0:0:0: Attached scsi generic sg0 type 0
- done.
- [ 25.020165][ C0] random: crng init done
- Setting hostname to 'debian'...done.
- Activating swap:.
- [ 26.301723][ T458] EXT4-fs (sda1): re-mounted. Opts: (null). Quota mode: none.
- Will now check root file system:[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/sda1
- e2fsck 1.46.2 (28-Feb-2021)
- rootfs: clean, 15649/960992 files, 255351/3839527 blocks
- .
- [ 26.758046][ T470] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
- Will now check all file systems.
- Checking all file systems.
- UUID=8eff630a-0e61-4a3e-8456-df8ee9245608 is mounted
- Done checking file systems.
- Log is being saved in /var/log/fsck/checkfs if that location is writable.
- Cleaning up temporary files...Cleaning /tmp...done.
- /tmp.
- Will now mount local filesystems:.
- Will now activate swapfile swap, if any:done.
- Checking minimum space in /tmp...done.
- Cleaning up temporary files....
- Starting Setting kernel variables: sysctl.
- Initializing random number generator...done.
- Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1
- Copyright 2004-2018 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- Listening on LPF/eth0/00:e1:75:82:1b:06
- Sending on LPF/eth0/00:e1:75:82:1b:06
- Sending on Socket/fallback
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- No DHCPOFFERS received.
- No working leases in persistent database - sleeping.
- done.
- Starting RPC port mapper daemon: rpcbind.
- Starting NFS common utilities: statd idmapd.
- Cleaning up temporary files....
- INIT: Entering runlevel: 2
- Using makefile-style concurrent boot in runlevel 2.
- Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
- 1014 (syslogd)
- .
- Starting NFS common utilities: statd idmapd.
- Starting system message bus: dbus.
- Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- Not starting NFS kernel daemon: no exports. ... (warning).
- Starting NTP server: ntpd.
- Starting OpenBSD Secure Shell server: sshd.
- Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
- 1054 (klogd)
- .
- Running local boot scripts (/etc/rc.local)
- .
- Debian GNU/Linux 11 debian ttyS0
- debian login:
Add Comment
Please, Sign In to add comment