Public Pastes
daily pastebin goal
56%
SHARE
TWEET

nahab

a guest Mar 29th, 2012 23 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 2.6.32-40-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #87-Ubuntu SMP Mon Mar 5 20:26:31 UTC 2012 (Ubuntu 2.6.32-40.87-generic 2.6.32.57+drm33.23)
  4. [    0.000000] KERNEL supported cpus:
  5. [    0.000000]   Intel GenuineIntel
  6. [    0.000000]   AMD AuthenticAMD
  7. [    0.000000]   NSC Geode by NSC
  8. [    0.000000]   Cyrix CyrixInstead
  9. [    0.000000]   Centaur CentaurHauls
  10. [    0.000000]   Transmeta GenuineTMx86
  11. [    0.000000]   Transmeta TransmetaCPU
  12. [    0.000000]   UMC UMC UMC UMC
  13. [    0.000000] BIOS-provided physical RAM map:
  14. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  15. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  16. [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  17. [    0.000000]  BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
  18. [    0.000000]  BIOS-e820: 000000005fff0000 - 000000005fffffc0 (ACPI data)
  19. [    0.000000]  BIOS-e820: 000000005fffffc0 - 0000000060000000 (ACPI NVS)
  20. [    0.000000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
  21. [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
  22. [    0.000000] DMI 2.3 present.
  23. [    0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000
  24. [    0.000000] MTRR default type: uncachable
  25. [    0.000000] MTRR fixed ranges enabled:
  26. [    0.000000]   00000-9FFFF write-back
  27. [    0.000000]   A0000-BFFFF uncachable
  28. [    0.000000]   C0000-CFFFF write-protect
  29. [    0.000000]   D0000-DFFFF uncachable
  30. [    0.000000]   E0000-FFFFF write-protect
  31. [    0.000000] MTRR variable ranges enabled:
  32. [    0.000000]   0 base 000000000 mask FC0000000 write-back
  33. [    0.000000]   1 base 040000000 mask FE0000000 write-back
  34. [    0.000000]   2 disabled
  35. [    0.000000]   3 disabled
  36. [    0.000000]   4 disabled
  37. [    0.000000]   5 disabled
  38. [    0.000000]   6 disabled
  39. [    0.000000]   7 disabled
  40. [    0.000000] PAT not supported by CPU.
  41. [    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
  42. [    0.000000] Scanning 1 areas for low memory corruption
  43. [    0.000000] modified physical RAM map:
  44. [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
  45. [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
  46. [    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
  47. [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
  48. [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
  49. [    0.000000]  modified: 0000000000100000 - 000000005fff0000 (usable)
  50. [    0.000000]  modified: 000000005fff0000 - 000000005fffffc0 (ACPI data)
  51. [    0.000000]  modified: 000000005fffffc0 - 0000000060000000 (ACPI NVS)
  52. [    0.000000]  modified: 00000000ffb80000 - 00000000ffc00000 (reserved)
  53. [    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
  54. [    0.000000] initial memory mapped : 0 - 00c00000
  55. [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
  56. [    0.000000] Using x86 segment limits to approximate NX protection
  57. [    0.000000]  0000000000 - 0000400000 page 4k
  58. [    0.000000]  0000400000 - 0037400000 page 2M
  59. [    0.000000]  0037400000 - 00377fe000 page 4k
  60. [    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
  61. [    0.000000] RAMDISK: 37849000 - 37fef216
  62. [    0.000000] Allocated new RAMDISK: 008e8000 - 0108e216
  63. [    0.000000] Move RAMDISK from 0000000037849000 - 0000000037fef215 to 008e8000 - 0108e215
  64. [    0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00)
  65. [    0.000000] ACPI: RSDT 5fffa9f0 00034 (v01 INSYDE RSDT_000 00000001 _CSI 00010101)
  66. [    0.000000] ACPI: FACP 5ffffb00 00074 (v01 INSYDE FACP_000 00000100 _CSI 00010101)
  67. [    0.000000] ACPI: DSDT 5fffae70 04C85 (v01 TOSINV   INT810 00001002 INTL 02002036)
  68. [    0.000000] ACPI: FACS 5fffffc0 00040
  69. [    0.000000] ACPI: BOOT 5ffffb90 00028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010101)
  70. [    0.000000] ACPI: DBGP 5ffffbc0 00034 (v01 INSYDE DBGP_000 00000100 _CSI 00010101)
  71. [    0.000000] ACPI: SSDT 5fffaa30 00192 (v01 INSYDE   GV3Ref 00002000 INTL 20021002)
  72. [    0.000000] 647MB HIGHMEM available.
  73. [    0.000000] 887MB LOWMEM available.
  74. [    0.000000]   mapped low ram: 0 - 377fe000
  75. [    0.000000]   low ram: 0 - 377fe000
  76. [    0.000000]   node 0 low ram: 00000000 - 377fe000
  77. [    0.000000]   node 0 bootmap 00008000 - 0000ef00
  78. [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  79. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  80. [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  81. [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  82. [    0.000000]   #3 [0000100000 - 00008e3f18]    TEXT DATA BSS ==> [0000100000 - 00008e3f18]
  83. [    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  84. [    0.000000]   #5 [00008e4000 - 00008e71fc]              BRK ==> [00008e4000 - 00008e71fc]
  85. [    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  86. [    0.000000]   #7 [00008e8000 - 000108e216]      NEW RAMDISK ==> [00008e8000 - 000108e216]
  87. [    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
  88. [    0.000000] Zone PFN ranges:
  89. [    0.000000]   DMA      0x00000000 -> 0x00001000
  90. [    0.000000]   Normal   0x00001000 -> 0x000377fe
  91. [    0.000000]   HighMem  0x000377fe -> 0x0005fff0
  92. [    0.000000] Movable zone start PFN for each node
  93. [    0.000000] early_node_map[3] active PFN ranges
  94. [    0.000000]     0: 0x00000000 -> 0x00000002
  95. [    0.000000]     0: 0x00000006 -> 0x0000009f
  96. [    0.000000]     0: 0x00000100 -> 0x0005fff0
  97. [    0.000000] On node 0 totalpages: 393099
  98. [    0.000000] free_area_init_node: node 0, pgdat c079ea00, node_mem_map c1090000
  99. [    0.000000]   DMA zone: 32 pages used for memmap
  100. [    0.000000]   DMA zone: 0 pages reserved
  101. [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
  102. [    0.000000]   Normal zone: 1744 pages used for memmap
  103. [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
  104. [    0.000000]   HighMem zone: 1296 pages used for memmap
  105. [    0.000000]   HighMem zone: 164578 pages, LIFO batch:31
  106. [    0.000000] Using APIC driver default
  107. [    0.000000] ACPI: PM-Timer IO Port: 0x1008
  108. [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
  109. [    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
  110. [    0.000000] APIC: disable apic facility
  111. [    0.000000] nr_irqs_gsi: 16
  112. [    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
  113. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  114. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  115. [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  116. [    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9fb80000)
  117. [    0.000000] Booting paravirtualized kernel on bare hardware
  118. [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
  119. [    0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36056 r0 d21288 u4194304
  120. [    0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
  121. [    0.000000] pcpu-alloc: [0] 0
  122. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390027
  123. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-40-generic root=UUID=34b8ee5f-7d1f-462b-ad58-8f4b9ea29588 ro quiet splash
  124. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  125. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  126. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  127. [    0.000000] Enabling fast FPU save and restore... done.
  128. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  129. [    0.000000] Initializing CPU#0
  130. [    0.000000] allocated 7864000 bytes of page_cgroup
  131. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  132. [    0.000000] Initializing HighMem for node 0 (000377fe:0005fff0)
  133. [    0.000000] Memory: 1534664k/1572800k available (4697k kernel code, 36812k reserved, 2122k data, 664k init, 663496k highmem)
  134. [    0.000000] virtual kernel memory layout:
  135. [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
  136. [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  137. [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
  138. [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
  139. [    0.000000]       .init : 0xc07a9000 - 0xc084f000   ( 664 kB)
  140. [    0.000000]       .data : 0xc05966f7 - 0xc07a8fc8   (2122 kB)
  141. [    0.000000]       .text : 0xc0100000 - 0xc05966f7   (4697 kB)
  142. [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  143. [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  144. [    0.000000] Hierarchical RCU implementation.
  145. [    0.000000] NR_IRQS:2304 nr_irqs:256
  146. [    0.000000] Console: colour VGA+ 80x25
  147. [    0.000000] console [tty0] enabled
  148. [    0.000000] Fast TSC calibration using PIT
  149. [    0.000000] Detected 1196.146 MHz processor.
  150. [    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2392.29 BogoMIPS (lpj=4784584)
  151. [    0.004050] Security Framework initialized
  152. [    0.004103] AppArmor: AppArmor initialized
  153. [    0.004123] Mount-cache hash table entries: 512
  154. [    0.004390] Initializing cgroup subsys ns
  155. [    0.004403] Initializing cgroup subsys cpuacct
  156. [    0.004410] Initializing cgroup subsys memory
  157. [    0.004428] Initializing cgroup subsys devices
  158. [    0.004432] Initializing cgroup subsys freezer
  159. [    0.004437] Initializing cgroup subsys net_cls
  160. [    0.004486] CPU: L1 I cache: 32K, L1 D cache: 32K
  161. [    0.004496] mce: CPU supports 5 MCE banks
  162. [    0.004526] Performance Events:
  163. [    0.004530] no APIC, boot with the "lapic" boot parameter to force-enable it.
  164. [    0.004534] no hardware sampling interrupt available.
  165. [    0.004538] p6 PMU driver.
  166. [    0.004548] ... version:                0
  167. [    0.004551] ... bit width:              32
  168. [    0.004555] ... generic registers:      2
  169. [    0.004559] ... value mask:             00000000ffffffff
  170. [    0.004562] ... max period:             000000007fffffff
  171. [    0.004566] ... fixed-purpose events:   0
  172. [    0.004569] ... event mask:             0000000000000003
  173. [    0.004578] Checking 'hlt' instruction... OK.
  174. [    0.021257] SMP alternatives: switching to UP code
  175. [    0.034858] Freeing SMP alternatives: 19k freed
  176. [    0.034891] ACPI: Core revision 20090903
  177. [    0.045406] ACPI: setting ELCR to 0200 (from 0800)
  178. [    0.048031] ftrace: converting mcount calls to 0f 1f 44 00 00
  179. [    0.048046] ftrace: allocating 21829 entries in 43 pages
  180. [    0.052001] Enabling APIC mode:  Flat.  Using 0 I/O APICs
  181. [    0.052001] weird, boot CPU (#0) not listed by the BIOS.
  182. [    0.052001] SMP motherboard not detected.
  183. [    0.052001] Local APIC not detected. Using dummy APIC emulation.
  184. [    0.052001] SMP disabled
  185. [    0.052001] Brought up 1 CPUs
  186. [    0.052001] Total of 1 processors activated (2392.29 BogoMIPS).
  187. [    0.052001] CPU0 attaching NULL sched-domain.
  188. [    0.052001] devtmpfs: initialized
  189. [    0.052733] regulator: core version 0.5
  190. [    0.052773] Time: 21:18:39  Date: 03/29/12
  191. [    0.052892] NET: Registered protocol family 16
  192. [    0.053173] EISA bus registered
  193. [    0.053215] ACPI: bus type pci registered
  194. [    0.053429] PCI: PCI BIOS revision 2.10 entry at 0xe9db4, last bus=2
  195. [    0.053434] PCI: Using configuration type 1 for base access
  196. [    0.055403] bio: create slab <bio-0> at 0
  197. [    0.056795] ACPI: EC: Look up EC in DSDT
  198. [    0.070401] ACPI: Interpreter enabled
  199. [    0.070415] ACPI: (supports S0 S3 S4 S5)
  200. [    0.070459] ACPI: Using PIC for interrupt routing
  201. [    0.071280] ACPI: EC: GPE storm detected, transactions will use polling mode
  202. [    0.130715] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
  203. [    0.130947] ACPI: Power Resource [PFA1] (off)
  204. [    0.131104] ACPI: Power Resource [PFA0] (off)
  205. [    0.132367] ACPI: ACPI Dock Station Driver: 2 docks/bays found
  206. [    0.132708] ACPI: PCI Root Bridge [PCI0] (0000:00)
  207. [    0.132825] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xb0000000-0xb3ffffff]
  208. [    0.132975] pci 0000:00:1d.0: reg 20 io port: [0x1200-0x121f]
  209. [    0.133039] pci 0000:00:1d.1: reg 20 io port: [0x1220-0x123f]
  210. [    0.133102] pci 0000:00:1d.2: reg 20 io port: [0x1240-0x125f]
  211. [    0.133174] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4000000-0xf40003ff]
  212. [    0.133254] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  213. [    0.133262] pci 0000:00:1d.7: PME# disabled
  214. [    0.133379] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
  215. [    0.133387] pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO
  216. [    0.133420] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
  217. [    0.133429] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
  218. [    0.133438] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
  219. [    0.133447] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
  220. [    0.133457] pci 0000:00:1f.1: reg 20 io port: [0x1100-0x110f]
  221. [    0.133466] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
  222. [    0.133519] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
  223. [    0.133528] pci 0000:00:1f.5: reg 14 io port: [0xe100-0xe13f]
  224. [    0.133537] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf0000000-0xf00001ff]
  225. [    0.133546] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf0000200-0xf00002ff]
  226. [    0.133590] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
  227. [    0.133596] pci 0000:00:1f.5: PME# disabled
  228. [    0.133632] pci 0000:00:1f.6: reg 10 io port: [0xe200-0xe2ff]
  229. [    0.133641] pci 0000:00:1f.6: reg 14 io port: [0xe300-0xe37f]
  230. [    0.133692] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
  231. [    0.133698] pci 0000:00:1f.6: PME# disabled
  232. [    0.133747] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xa8000000-0xafffffff]
  233. [    0.133756] pci 0000:01:00.0: reg 14 io port: [0xc100-0xc1ff]
  234. [    0.133764] pci 0000:01:00.0: reg 18 32bit mmio: [0xe0010000-0xe001ffff]
  235. [    0.133783] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
  236. [    0.133818] pci 0000:01:00.0: supports D1 D2
  237. [    0.133860] pci 0000:00:01.0: bridge io port: [0xc000-0xdfff]
  238. [    0.133865] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xefffffff]
  239. [    0.133871] pci 0000:00:01.0: bridge 32bit mmio pref: [0xa0000000-0xafffffff]
  240. [    0.133920] pci 0000:02:04.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
  241. [    0.134017] pci 0000:02:08.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff]
  242. [    0.134026] pci 0000:02:08.0: reg 14 io port: [0xa080-0xa0bf]
  243. [    0.134077] pci 0000:02:08.0: supports D1 D2
  244. [    0.134081] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
  245. [    0.134087] pci 0000:02:08.0: PME# disabled
  246. [    0.134131] pci 0000:02:09.0: reg 10 32bit mmio: [0x0de000-0x0defff]
  247. [    0.134163] pci 0000:02:09.0: supports D1 D2
  248. [    0.134167] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
  249. [    0.134173] pci 0000:02:09.0: PME# disabled
  250. [    0.134212] pci 0000:02:09.1: reg 10 32bit mmio: [0x0df000-0x0dffff]
  251. [    0.134243] pci 0000:02:09.1: supports D1 D2
  252. [    0.134247] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
  253. [    0.134253] pci 0000:02:09.1: PME# disabled
  254. [    0.134291] pci 0000:02:09.2: reg 10 io port: [0xa000-0xa07f]
  255. [    0.134350] pci 0000:02:09.2: supports D1 D2
  256. [    0.134354] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot
  257. [    0.134360] pci 0000:02:09.2: PME# disabled
  258. [    0.134402] pci 0000:00:1e.0: transparent bridge
  259. [    0.134409] pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff]
  260. [    0.134416] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0000000-0xdfffffff]
  261. [    0.134424] pci 0000:00:1e.0: bridge 32bit mmio pref: [0x90000000-0x9fffffff]
  262. [    0.134473] pci_bus 0000:00: on NUMA node 0
  263. [    0.134495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  264. [    0.134615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
  265. [    0.141631] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
  266. [    0.141886] ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
  267. [    0.142133] ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
  268. [    0.142379] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
  269. [    0.142623] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *11
  270. [    0.142848] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
  271. [    0.143074] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
  272. [    0.143302] ACPI: PCI Interrupt Link [LNKH] (IRQs 11) *0, disabled.
  273. [    0.143592] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  274. [    0.143605] vgaarb: loaded
  275. [    0.143917] SCSI subsystem initialized
  276. [    0.144183] libata version 3.00 loaded.
  277. [    0.144495] usbcore: registered new interface driver usbfs
  278. [    0.144525] usbcore: registered new interface driver hub
  279. [    0.144674] usbcore: registered new device driver usb
  280. [    0.145190] ACPI: WMI: Mapper loaded
  281. [    0.145197] PCI: Using ACPI for IRQ routing
  282. [    0.145535] NetLabel: Initializing
  283. [    0.145544] NetLabel:  domain hash size = 128
  284. [    0.145547] NetLabel:  protocols = UNLABELED CIPSOv4
  285. [    0.145574] NetLabel:  unlabeled traffic allowed by default
  286. [    0.145710] Switching to clocksource tsc
  287. [    0.148000] AppArmor: AppArmor Filesystem Enabled
  288. [    0.148000] pnp: PnP ACPI init
  289. [    0.148000] ACPI: bus type pnp registered
  290. [    0.184154] pnp: PnP ACPI: found 13 devices
  291. [    0.184163] ACPI: ACPI bus type pnp unregistered
  292. [    0.184170] PnPBIOS: Disabled by ACPI PNP
  293. [    0.184209] system 00:05: iomem range 0xfff80000-0xffffffff has been reserved
  294. [    0.184227] system 00:07: ioport range 0x680-0x6ff has been reserved
  295. [    0.184233] system 00:07: ioport range 0x200-0x20f has been reserved
  296. [    0.184238] system 00:07: ioport range 0x1000-0x107f has been reserved
  297. [    0.184243] system 00:07: ioport range 0x1300-0x133f has been reserved
  298. [    0.184249] system 00:07: ioport range 0x77c-0x77f has been reserved
  299. [    0.184254] system 00:07: ioport range 0x300-0x301 has been reserved
  300. [    0.184259] system 00:07: ioport range 0x310-0x31f has been reserved
  301. [    0.219302] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  302. [    0.219310] pci 0000:00:01.0:   IO window: 0xc000-0xdfff
  303. [    0.219317] pci 0000:00:01.0:   MEM window: 0xe0000000-0xefffffff
  304. [    0.219323] pci 0000:00:01.0:   PREFETCH window: 0xa0000000-0xafffffff
  305. [    0.219340] pci 0000:02:09.0: CardBus bridge, secondary bus 0000:03
  306. [    0.219345] pci 0000:02:09.0:   IO window: 0x00a400-0x00a4ff
  307. [    0.219351] pci 0000:02:09.0:   IO window: 0x00a800-0x00a8ff
  308. [    0.219358] pci 0000:02:09.0:   PREFETCH window: 0x90000000-0x93ffffff
  309. [    0.219364] pci 0000:02:09.0:   MEM window: 0xd4000000-0xd7ffffff
  310. [    0.219371] pci 0000:02:09.1: CardBus bridge, secondary bus 0000:07
  311. [    0.219375] pci 0000:02:09.1:   IO window: 0x00ac00-0x00acff
  312. [    0.219381] pci 0000:02:09.1:   IO window: 0x00b000-0x00b0ff
  313. [    0.219388] pci 0000:02:09.1:   PREFETCH window: 0x94000000-0x97ffffff
  314. [    0.219394] pci 0000:02:09.1:   MEM window: 0xd8000000-0xdbffffff
  315. [    0.219401] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
  316. [    0.219406] pci 0000:00:1e.0:   IO window: 0xa000-0xbfff
  317. [    0.219414] pci 0000:00:1e.0:   MEM window: 0xd0000000-0xdfffffff
  318. [    0.219420] pci 0000:00:1e.0:   PREFETCH window: 0x90000000-0x9fffffff
  319. [    0.219447] pci 0000:00:1e.0: setting latency timer to 64
  320. [    0.219847] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
  321. [    0.219855] PCI: setting IRQ 11 as level-triggered
  322. [    0.219863] pci 0000:02:09.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
  323. [    0.220210] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
  324. [    0.220222] pci 0000:02:09.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  325. [    0.220237] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
  326. [    0.220241] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  327. [    0.220247] pci_bus 0000:01: resource 0 io:  [0xc000-0xdfff]
  328. [    0.220252] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xefffffff]
  329. [    0.220256] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xafffffff]
  330. [    0.220262] pci_bus 0000:02: resource 0 io:  [0xa000-0xbfff]
  331. [    0.220267] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xdfffffff]
  332. [    0.220272] pci_bus 0000:02: resource 2 pref mem [0x90000000-0x9fffffff]
  333. [    0.220276] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
  334. [    0.220281] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
  335. [    0.220286] pci_bus 0000:03: resource 0 io:  [0xa400-0xa4ff]
  336. [    0.220291] pci_bus 0000:03: resource 1 io:  [0xa800-0xa8ff]
  337. [    0.220295] pci_bus 0000:03: resource 2 pref mem [0x90000000-0x93ffffff]
  338. [    0.220300] pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
  339. [    0.220306] pci_bus 0000:07: resource 0 io:  [0xac00-0xacff]
  340. [    0.220310] pci_bus 0000:07: resource 1 io:  [0xb000-0xb0ff]
  341. [    0.220315] pci_bus 0000:07: resource 2 pref mem [0x94000000-0x97ffffff]
  342. [    0.220320] pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
  343. [    0.220389] NET: Registered protocol family 2
  344. [    0.220568] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  345. [    0.221218] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  346. [    0.222521] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  347. [    0.223151] TCP: Hash tables configured (established 131072 bind 65536)
  348. [    0.223157] TCP reno registered
  349. [    0.223335] NET: Registered protocol family 1
  350. [    0.223461] pci 0000:01:00.0: Boot video device
  351. [    0.223481] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
  352. [    0.223656] Simple Boot Flag at 0x37 set to 0x1
  353. [    0.223810] cpufreq-nforce2: No nForce2 chipset.
  354. [    0.223866] Scanning for low memory corruption every 60 seconds
  355. [    0.224208] audit: initializing netlink socket (disabled)
  356. [    0.224252] type=2000 audit(1333055919.222:1): initialized
  357. [    0.242874] Trying to unpack rootfs image as initramfs...
  358. [    0.262695] highmem bounce pool size: 64 pages
  359. [    0.262709] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  360. [    0.269057] VFS: Disk quotas dquot_6.5.2
  361. [    0.269235] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  362. [    0.271011] fuse init (API version 7.13)
  363. [    0.271336] msgmni has been set to 1703
  364. [    0.274905] alg: No test for stdrng (krng)
  365. [    0.275118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  366. [    0.275127] io scheduler noop registered
  367. [    0.275131] io scheduler anticipatory registered
  368. [    0.275134] io scheduler deadline registered
  369. [    0.275262] io scheduler cfq registered (default)
  370. [    0.275525] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  371. [    0.275574] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  372. [    0.290956] ACPI: AC Adapter [AC] (on-line)
  373. [    0.291166] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
  374. [    0.306624] ACPI: Lid Switch [LID]
  375. [    0.306774] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
  376. [    0.306784] ACPI: Power Button [PBTN]
  377. [    0.306951] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  378. [    0.306959] ACPI: Power Button [PWRF]
  379. [    0.307360] fan PNP0C0B:00: registered as cooling_device0
  380. [    0.307377] ACPI: Fan [FAN0] (off)
  381. [    0.307593] fan PNP0C0B:01: registered as cooling_device1
  382. [    0.307609] ACPI: Fan [FAN1] (off)
  383. [    0.308203] Marking TSC unstable due to TSC halts in idle
  384. [    0.308428] processor LNXCPU:00: registered as cooling_device2
  385. [    0.310939] Switching to clocksource acpi_pm
  386. [    0.532700] thermal LNXTHERM:01: registered as thermal_zone0
  387. [    0.532723] ACPI: Thermal Zone [THZN] (55 C)
  388. [    0.542770] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  389. [    0.542918] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  390. [    0.543899] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  391. [    0.544383] isapnp: Scanning for PnP cards...
  392. [    0.550447] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
  393. [    0.550459] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
  394. [    0.550474] serial 0000:00:1f.6: PCI INT B disabled
  395. [    0.557785] brd: module loaded
  396. [    0.559212] loop: module loaded
  397. [    0.559461] input: Macintosh mouse button emulation as /devices/virtual/input/input3
  398. [    0.559725] ata_piix 0000:00:1f.1: version 2.13
  399. [    0.559747] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
  400. [    0.608725] ACPI: Battery Slot [BAT1] (battery absent)
  401. [    0.608794] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
  402. [    0.608805] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  403. [    0.608900] ata_piix 0000:00:1f.1: setting latency timer to 64
  404. [    0.609107] scsi0 : ata_piix
  405. [    0.609424] scsi1 : ata_piix
  406. [    0.611400] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
  407. [    0.611409] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
  408. [    0.612496] Fixed MDIO Bus: probed
  409. [    0.612579] PPP generic driver version 2.4.2
  410. [    0.612741] tun: Universal TUN/TAP device driver, 1.6
  411. [    0.612747] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  412. [    0.613071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  413. [    0.613199] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
  414. [    0.613246] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
  415. [    0.613593] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
  416. [    0.613604] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
  417. [    0.613636] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  418. [    0.613643] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  419. [    0.613787] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  420. [    0.613861] ehci_hcd 0000:00:1d.7: debug port 1
  421. [    0.617753] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  422. [    0.624341] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4000000
  423. [    0.644120] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  424. [    0.644382] usb usb1: configuration #1 chosen from 1 choice
  425. [    0.644465] hub 1-0:1.0: USB hub found
  426. [    0.644495] hub 1-0:1.0: 6 ports detected
  427. [    0.644653] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  428. [    0.644693] uhci_hcd: USB Universal Host Controller Interface driver
  429. [    0.644793] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
  430. [    0.644809] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  431. [    0.644815] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  432. [    0.644957] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  433. [    0.644999] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001200
  434. [    0.645269] usb usb2: configuration #1 chosen from 1 choice
  435. [    0.645351] hub 2-0:1.0: USB hub found
  436. [    0.645377] hub 2-0:1.0: 2 ports detected
  437. [    0.645498] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  438. [    0.645516] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  439. [    0.645522] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  440. [    0.645655] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  441. [    0.645699] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
  442. [    0.645979] usb usb3: configuration #1 chosen from 1 choice
  443. [    0.646055] hub 3-0:1.0: USB hub found
  444. [    0.646081] hub 3-0:1.0: 2 ports detected
  445. [    0.646198] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  446. [    0.646217] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  447. [    0.646224] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  448. [    0.646395] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  449. [    0.646438] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
  450. [    0.646730] usb usb4: configuration #1 chosen from 1 choice
  451. [    0.646808] hub 4-0:1.0: USB hub found
  452. [    0.646835] hub 4-0:1.0: 2 ports detected
  453. [    0.647056] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  454. [    0.652396] i8042.c: Detected active multiplexing controller, rev 1.1.
  455. [    0.662282] serio: i8042 KBD port at 0x60,0x64 irq 1
  456. [    0.662308] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  457. [    0.664844] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  458. [    0.664951] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  459. [    0.665026] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  460. [    0.665467] mice: PS/2 mouse device common for all mice
  461. [    0.665921] rtc_cmos 00:03: RTC can wake from S4
  462. [    0.666100] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  463. [    0.666131] rtc0: alarms up to one month, 242 bytes nvram
  464. [    0.666457] device-mapper: uevent: version 1.0.3
  465. [    0.667869] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  466. [    0.670260] device-mapper: multipath: version 1.1.0 loaded
  467. [    0.670271] device-mapper: multipath round-robin: version 1.0.0 loaded
  468. [    0.671723] EISA: Probing bus 0 at eisa.0
  469. [    0.671737] Cannot allocate resource for EISA slot 1
  470. [    0.671800] EISA: Detected 0 cards.
  471. [    0.674189] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  472. [    0.674574] cpuidle: using governor ladder
  473. [    0.674688] cpuidle: using governor menu
  474. [    0.675503] TCP cubic registered
  475. [    0.676131] NET: Registered protocol family 10
  476. [    0.677806] NET: Registered protocol family 17
  477. [    0.678356] Using IPI No-Shortcut mode
  478. [    0.678639] PM: Resume from disk failed.
  479. [    0.678672] registered taskstats version 1
  480. [    0.679052]   Magic number: 4:660:349
  481. [    0.679222] rtc_cmos 00:03: setting system clock to 2012-03-29 21:18:40 UTC (1333055920)
  482. [    0.679228] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  483. [    0.679231] EDD information not available.
  484. [    0.816366] ata1.00: ATA-6: ST980815A, 3.ALC, max UDMA/100
  485. [    0.816373] ata1.00: 156301488 sectors, multi 16: LBA48
  486. [    0.816878] ata2.00: ATAPI: DW-224E, 7.0B, max UDMA/33
  487. [    0.825026] ata2.00: configured for UDMA/33
  488. [    0.825148] ata1.00: configured for UDMA/100
  489. [    0.992323] usb 1-1: new high speed USB device using ehci_hcd and address 2
  490. [    1.004780] ACPI: Battery Slot [BAT0] (battery present)
  491. [    1.123313] Freeing initrd memory: 7832k freed
  492. [    1.218572] isapnp: No Plug & Play device found
  493. [    1.218945] scsi 0:0:0:0: Direct-Access     ATA      ST980815A        3.AL PQ: 0 ANSI: 5
  494. [    1.219331] sd 0:0:0:0: Attached scsi generic sg0 type 0
  495. [    1.219927] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
  496. [    1.220550] sd 0:0:0:0: [sda] Write Protect is off
  497. [    1.220560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  498. [    1.220763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  499. [    1.220822] scsi 1:0:0:0: CD-ROM            TEAC     DW-224E          7.0B PQ: 0 ANSI: 5
  500. [    1.222566]  sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
  501. [    1.224231] Uniform CD-ROM driver Revision: 3.20
  502. [    1.224495] sr 1:0:0:0: Attached scsi CD-ROM sr0
  503. [    1.224671] sr 1:0:0:0: Attached scsi generic sg1 type 5
  504. [    1.234376] usb 1-1: configuration #1 chosen from 1 choice
  505. [    1.244957]  sda1 sda2 < sda5 sda6 sda7 >
  506. [    1.286228] sd 0:0:0:0: [sda] Attached SCSI disk
  507. [    1.286276] Freeing unused kernel memory: 664k freed
  508. [    1.287142] Write protecting the kernel text: 4700k
  509. [    1.287203] Write protecting the kernel read-only data: 1844k
  510. [    1.346180] udev: starting version 151
  511. [    1.632104] usb 2-2: new low speed USB device using uhci_hcd and address 2
  512. [    1.808193] usb 2-2: configuration #1 chosen from 1 choice
  513. [    2.183476] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  514. [    2.183485] e100: Copyright(c) 1999-2006 Intel Corporation
  515. [    2.183959] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 6
  516. [    2.183968] PCI: setting IRQ 6 as level-triggered
  517. [    2.183977] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 6 (level, low) -> IRQ 6
  518. [    2.274848] e100 0000:02:08.0: PME# disabled
  519. [    2.280742] usbcore: registered new interface driver hiddev
  520. [    2.283331] e100: eth0: e100_probe: addr 0xd0000000, irq 6, MAC addr 00:a0:d1:d5:b3:c1
  521. [    2.300637] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
  522. [    2.301688] generic-usb 0003:046D:C501.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
  523. [    2.301808] usbcore: registered new interface driver usbhid
  524. [    2.305440] usbhid: v2.6:USB HID core driver
  525. [    2.433425] kjournald starting.  Commit interval 5 seconds
  526. [    2.433460] EXT3-fs: mounted filesystem with ordered data mode.
  527. [   21.552152] Adding 1047544k swap on /dev/sda5.  Priority:-1 extents:1 across:1047544k
  528. [   21.637242] Adding 1564664k swap on /dev/sda7.  Priority:-2 extents:1 across:1564664k
  529. [   21.750472] udev: starting version 151
  530. [   21.807603] EXT3 FS on sda6, internal journal
  531. [   21.956545] lp: driver loaded but no devices found
  532. [   22.133749] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  533. [   22.702773] intel_rng: Firmware space is locked read-only. If you can't or
  534. [   22.702779] intel_rng: don't want to disable this in firmware setup, and if
  535. [   22.702782] intel_rng: you are certain that your system has a functional
  536. [   22.702784] intel_rng: RNG, try using the 'no_fwh_detect' option.
  537. [   22.703117] Linux agpgart interface v0.103
  538. [   23.287519] parport_pc 00:0a: reported by Plug and Play ACPI
  539. [   23.287612] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
  540. [   23.380487] lp0: using parport0 (interrupt-driven).
  541. [   23.396833] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
  542. [   23.446976] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xb0000000
  543. [   23.837405] irda_init()
  544. [   23.837441] NET: Registered protocol family 23
  545. [   23.954393] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
  546. [   23.961286] ppdev: user-space parallel port driver
  547. [   23.981719] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
  548. [   24.048159] type=1505 audit(1333055943.868:2):  operation="profile_load" pid=570 name="/sbin/dhclient3"
  549. [   24.057288] type=1505 audit(1333055943.876:3):  operation="profile_load" pid=570 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  550. [   24.057946] type=1505 audit(1333055943.876:4):  operation="profile_load" pid=570 name="/usr/lib/connman/scripts/dhclient-script"
  551. [   24.087520] type=1505 audit(1333055943.904:5):  operation="profile_replace" pid=582 name="/sbin/dhclient3"
  552. [   24.088815] type=1505 audit(1333055943.908:6):  operation="profile_replace" pid=582 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  553. [   24.089493] type=1505 audit(1333055943.908:7):  operation="profile_replace" pid=582 name="/usr/lib/connman/scripts/dhclient-script"
  554. [   24.341663] [drm] Initialized drm 1.1.0 20060810
  555. [   24.420244] yenta_cardbus 0000:02:09.0: CardBus bridge found [1179:ff10]
  556. [   24.420269] yenta_cardbus 0000:02:09.0: Using CSCINT to route CSC interrupts to PCI
  557. [   24.420274] yenta_cardbus 0000:02:09.0: Routing CardBus interrupts to PCI
  558. [   24.420281] yenta_cardbus 0000:02:09.0: TI: mfunc 0x01000222, devctl 0x44
  559. [   24.462519] Detected unconfigured Toshiba laptop with Intel 8281DBM LPC bridge SMSC IrDA chip, pre-configuring device.
  560. [   24.462530] Setting up Intel 82801 controller and SMSC device
  561. [   24.462550] Detected Chip id: 0x00, setting up registers...
  562. [   24.462559] ERROR: could not configure SIR ioport.
  563. [   24.462562] Try to supply ircc_cfg argument.
  564. [   24.462577] smsc-ircc2, Preconfiguration failed !
  565. [   24.652664] yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0408, PCI irq 11
  566. [   24.652673] yenta_cardbus 0000:02:09.0: Socket status: 30000006
  567. [   24.652680] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
  568. [   24.652699] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
  569. [   24.652706] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xbfff: clean.
  570. [   24.653377] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xdfffffff
  571. [   24.653383] yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff
  572. [   24.658998] yenta_cardbus 0000:02:09.1: CardBus bridge found [1179:ff10]
  573. [   24.659023] yenta_cardbus 0000:02:09.1: Using CSCINT to route CSC interrupts to PCI
  574. [   24.659028] yenta_cardbus 0000:02:09.1: Routing CardBus interrupts to PCI
  575. [   24.659036] yenta_cardbus 0000:02:09.1: TI: mfunc 0x01000222, devctl 0x44
  576. [   24.777090] Compat-wireless backport release: compat-wireless-v3.2-1-s
  577. [   24.777097] Backport based on linux-stable.git v3.2
  578. [   24.813266] type=1505 audit(1333055944.632:8):  operation="profile_load" pid=667 name="/usr/share/gdm/guest-session/Xsession"
  579. [   24.854700] type=1505 audit(1333055944.672:9):  operation="profile_replace" pid=674 name="/sbin/dhclient3"
  580. [   24.855914] type=1505 audit(1333055944.672:10):  operation="profile_replace" pid=674 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  581. [   24.877743] type=1505 audit(1333055944.696:11):  operation="profile_replace" pid=674 name="/usr/lib/connman/scripts/dhclient-script"
  582. [   24.900632] yenta_cardbus 0000:02:09.1: ISA IRQ mask 0x0428, PCI irq 11
  583. [   24.900640] yenta_cardbus 0000:02:09.1: Socket status: 30000006
  584. [   24.900648] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
  585. [   24.900666] yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
  586. [   24.900674] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xbfff: clean.
  587. [   24.901344] yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xdfffffff
  588. [   24.901350] yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff
  589. [   25.335002] ADDRCONF(NETDEV_UP): eth0: link is not ready
  590. [   25.509598] cfg80211: Calling CRDA to update world regulatory domain
  591. [   25.665472] cfg80211: World regulatory domain updated:
  592. [   25.665483] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  593. [   25.665489] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  594. [   25.665494] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  595. [   25.665500] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  596. [   25.665505] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  597. [   25.665510] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  598. [   25.704648] [drm] radeon defaulting to kernel modesetting.
  599. [   25.704658] [drm] radeon kernel modesetting enabled.
  600. [   25.704779] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
  601. [   25.720719] lib80211: common routines for IEEE802.11 drivers
  602. [   25.720731] lib80211_crypt: registered algorithm 'NULL'
  603. [   25.732890] [drm] radeon: Initializing kernel modesetting.
  604. [   25.733085] [drm] register mmio base: 0xE0010000
  605. [   25.733092] [drm] register mmio size: 65536
  606. [   25.733534] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
  607. [   25.733594] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
  608. [   25.733622] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
  609. [   25.733666] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
  610. [   25.733701] [drm] radeon: VRAM 64M
  611. [   25.733705] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
  612. [   25.733708] [drm] radeon: GTT 64M
  613. [   25.733711] [drm] radeon: GTT from 0xB0000000 to 0xB3FFFFFF
  614. [   25.733757] [drm] radeon: irq initialized.
  615. [   25.733862] [drm] Detected VRAM RAM=64M, BAR=128M
  616. [   25.733870] [drm] RAM width 64bits DDR
  617. [   25.734065] [TTM] Zone  kernel: Available graphics memory: 440302 kiB.
  618. [   25.734071] [TTM] Zone highmem: Available graphics memory: 772050 kiB.
  619. [   25.734117] [drm] radeon: 32M of VRAM memory ready
  620. [   25.734123] [drm] radeon: 64M of GTT memory ready.
  621. [   25.734376] [drm] radeon: cp idle (0x02000603)
  622. [   25.734637] [drm] Loading R200 Microcode
  623. [   25.735436] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
  624. [   25.797046] [drm] radeon: ring at 0x00000000B0000000
  625. [   25.797073] [drm] ring test succeeded in 1 usecs
  626. [   25.807435] [drm] radeon: ib pool ready.
  627. [   25.807613] [drm] ib test succeeded in 0 usecs
  628. [   25.815885] [drm] Panel ID String: SEC                    
  629. [   25.815895] [drm] Panel Size 1024x768
  630. [   25.817496] [drm] Default TV standard: NTSC
  631. [   25.817505] [drm] 27.000000000 MHz TV ref clk
  632. [   25.817514] [drm] Default TV standard: NTSC
  633. [   25.817517] [drm] 27.000000000 MHz TV ref clk
  634. [   25.818146] [drm] Radeon Display Connectors
  635. [   25.818155] [drm] Connector 0:
  636. [   25.818159] [drm]   VGA
  637. [   25.818164] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
  638. [   25.818167] [drm]   Encoders:
  639. [   25.818170] [drm]     CRT1: INTERNAL_DAC1
  640. [   25.818173] [drm] Connector 1:
  641. [   25.818175] [drm]   LVDS
  642. [   25.818178] [drm]   Encoders:
  643. [   25.818181] [drm]     LCD1: INTERNAL_LVDS
  644. [   25.818183] [drm] Connector 2:
  645. [   25.818186] [drm]   S-video
  646. [   25.818188] [drm]   Encoders:
  647. [   25.818191] [drm]     TV1: INTERNAL_DAC2
  648. [   25.820793] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
  649. [   25.822692] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
  650. [   25.823575] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
  651. [   25.828400] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
  652. [   25.829683] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
  653. [   25.978661] [drm] fb mappable at 0xA8040000
  654. [   25.978669] [drm] vram apper at 0xA8000000
  655. [   25.978672] [drm] size 786432
  656. [   25.978675] [drm] fb depth is 8
  657. [   25.978678] [drm]    pitch is 1024
  658. [   25.979270] fb0: radeondrmfb frame buffer device
  659. [   25.979278] registered panic notifier
  660. [   25.979292] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
  661. [   26.104147] libipw: 802.11 data/management/control stack, git-1.1.13
  662. [   26.104158] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
  663. [   26.116436] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
  664. [   26.129091] vga16fb: initializing
  665. [   26.129105] vga16fb: mapped to 0xc00a0000
  666. [   26.129272] vga16fb: not registering due to another framebuffer present
  667. [   26.145941]  clean.
  668. [   26.146176] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
  669. [   26.147068] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
  670. [   26.147837] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
  671. [   26.157762] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
  672. [   26.414058] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
  673. [   26.414067] ipw2100: Copyright(c) 2003-2006 Intel Corporation
  674. [   26.414321] ipw2100 0000:02:04.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
  675. [   26.415333] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
  676. [   26.921667] cfg80211: failed to add phy80211 symlink to netdev!
  677. [   26.923535] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  678. [   26.923544] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  679. [   26.923548] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  680. [   26.923553] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  681. [   26.923557] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  682. [   26.923562] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  683. [   26.923566] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  684. [   26.923571] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  685. [   26.923575] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  686. [   26.923580] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  687. [   26.923584] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  688. [   26.923589] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  689. [   26.923593] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  690. [   26.923597] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  691. [   26.923601] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  692. [   26.923606] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  693. [   26.923610] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  694. [   26.923615] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  695. [   26.923619] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  696. [   26.923624] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  697. [   26.923628] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  698. [   26.923633] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  699. [   26.923637] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  700. [   26.923642] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  701. [   26.923646] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  702. [   26.923651] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  703. [   26.923655] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  704. [   26.923659] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  705. [   26.982075] Console: switching to colour frame buffer device 128x48
  706. [   27.075784] rtl8192cu: MAC address: c4:3d:c7:7d:71:67
  707. [   27.075798] rtl8192cu: Board Type 0
  708. [   27.161478] rtl8192cu:rtl92cu_init_sw_vars():<0-0> Failed to request firmware!
  709. [   27.161487] rtlwifi:rtl_usb_probe():<0-0> Can't init_sw_vars.
  710. [   27.161577] usbcore: registered new interface driver rtl8192cu
  711. [   27.175021] ADDRCONF(NETDEV_UP): eth1: link is not ready
  712. [   27.930638] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
  713. [   27.930734] Intel ICH 0000:00:1f.5: setting latency timer to 64
  714. [   28.352082] intel8x0_measure_ac97_clock: measured 54156 usecs (2609 samples)
  715. [   28.352091] intel8x0: clocking to 48000
  716. [   42.676645] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  717. [   43.632145] lib80211_crypt: registered algorithm 'CCMP'
  718. [   43.765072] padlock: VIA PadLock not detected.
  719. [   43.860841] lib80211_crypt: registered algorithm 'TKIP'
  720. [   53.364063] eth1: no IPv6 routers present
  721. [  123.730214] usb 1-1: USB disconnect, address 2
  722. [  126.012113] usb 1-1: new high speed USB device using ehci_hcd and address 4
  723. [  126.148015] usb 1-1: configuration #1 chosen from 1 choice
  724. [  126.269810] rtl8192cu: MAC address: c4:3d:c7:7d:71:67
  725. [  126.269824] rtl8192cu: Board Type 0
  726. [  126.280852] rtl8192cu:rtl92cu_init_sw_vars():<0-0> Failed to request firmware!
  727. [  126.280861] rtlwifi:rtl_usb_probe():<0-0> Can't init_sw_vars.
RAW Paste Data
Pastebin PRO WINTER Special!
Get 40% OFF Pastebin PRO accounts!
Top