Advertisement
Guest User

odroid c4 boot log ttyS0 -- serial bug on first boot, switches serial params in the middle of boot

a guest
May 9th, 2022
66
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 66.24 KB | None | 0 0
  1. [ 6445.451233@0] fb: osd[0] enable: 1 (Xorg)
  2. [ 6445.458436@1] fb: osd[0] canvas.idx =0x40
  3. [ 6445.458438@1] fb: osd[0] canvas.addr=0xe5800000
  4. [ 6445.458439@1] fb: osd[0] canvas.width=4096
  5. [ 6445.458440@1] fb: osd[0] canvas.height=1200
  6. [ 6445.458441@1] fb: osd[0] frame.width=1024
  7. [ 6445.458442@1] fb: osd[0] frame.height=600
  8. [ 6445.458444@1] fb: osd[0] out_addr_id =0x1
  9. [ 6445.525829@0] meson_uart ff803000.serial: tt 6445.529874@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
  10. [ OK ] Stopped User Manager for UID 1000.
  11. Stopping User Runtime Directory /run/user/1000...
  12. [ OK ] Started Show Plymouth Reboot Screen.
  13. [ OK ] Unmounted /run/user/1000.
  14. [ OK ] Stopped User Runtime Directory /run/user/1000.
  15. [ OK ] Removed slice User Slice of UID 1000.
  16. Stopping Permit User Sessions...
  17. [ OK ] Stopped Login Service.
  18. [ OK ] Stopped Permit User Sessions.
  19. [ OK ] Stopped target Remote File Systems.
  20. [ OK ] Stopped target Network.
  21. Stopping Raise network interfaces...
  22. Stopping Network Manager...
  23. Stopping WPA supplicant...
  24. [ OK ] Stopped WPA supplicant.
  25. [ OK ] Stopped Raise network interfaces.
  26. [ OK ] Stopped Network Manager.
  27. Stopping D-Bus System Message Bus...
  28. [ OK ] Stopped D-Bus System Message Bus.
  29. [ OK ] Stopped target Basic System.
  30. [ OK ] Stopped target Paths.
  31. [ OK ] Stopped CUPS Scheduler.
  32. [ OK ] Stopped target Sockets.
  33. [ OK ] Closed CUPS Scheduler.
  34. [ OK ] Closed Syslog Socket.
  35. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
  36. [ OK ] Stopped target Slices.
  37. [ OK ] Removed slice User and Session Slice.
  38. [ OK ] Stopped Forward Password R…s to Plymouth Directory Watch.
  39. [ OK ] Closed D-Bus System Message Bus Socket.
  40. [ OK ] Stopped target System Initialization.
  41. Stopping Load/Save Random Seed...
  42. [ OK ] Stopped Apply Kernel Variables.
  43. [ OK ] Stopped Load Kernel Modules.
  44. Stopping Update UTMP about System Boot/Shutdown...
  45. [ OK ] Stopped target Local Encrypted Volumes.
  46. [ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
  47. [ OK ] Stopped target Swap.
  48. [ OK ] Stopped Load/Save Random Seed.
  49. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  50. [ OK ] Stopped Create Volatile Files and Directories.
  51. [ OK ] Stopped target Local File Systems.
  52. Unmounting /boot...
  53. [ OK ] Unmounted /boot.
  54. [ OK ] Reached target Unmount All Filesystems.
  55. [ OK ] Stopped File System Check on /dev/disk/by-uuid/3086-D853.
  56. [ OK ] Removed slice system-systemd\x2dfsck.slice.
  57. [ OK ] Stopped target Local File Systems (Pre).
  58. [ OK ] Stopped Create Static Device Nodes in /dev.
  59. [ OK ] Stopped Create System Users.
  60. [ OK ] Stopped Remount Root and Kernel File Systems1] meson_wdt ffd0f0d0.watchdog: start watchdog
  61. [[ 6446.345719@1] meson_wdt ffd0f0d0.watchdog: stop watchdog
  62. 0m.
  63. [ OK ] Reached targ[ 6446.354435@0] systemd-shutdow: 40 output lines suppressed due to ratelimiting
  64. et Shutdown.
  65. [ OK ] Reached target Final Step.
  66. [ OK ] Started Reboot.
  67. [ OK ] Reached target Reboot.
  68. [ 6446.391968@0] systemd-shutdown[1]: Syncing filesystems and block devices.
  69. [ 6446.406104@1] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
  70. [ 6446.419981@1] systemd-journald[2011]: Received SIGTERM from PID 1 (systemd-shutdow).
  71. [ 6446.435231@1] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
  72. [ 6446.443509@1] meson_wdt ffd0f0d0.watchdog: start watchdog
  73. [ 6446.443568@1] systemd-shutdown[1]: Hardware watchdog 'aml Watchdog', version 0
  74. [ 6446.452019@1] systemd-shutdown[1]: Unmounting file systems.
  75. [ 6446.457905@3] [8978]: Remounting '/' read-only in with options 'discard,errors=remount-ro,stripe=32716,data=ordered'.
  76. [ 6446.488021@0] EXT4-fs (mmcblk0p2): re-mounted. Opts: discard,errors=remount-ro,stripe=32716,data=ordered
  77. [ 6446.506991@3] systemd-shutdown[1]: All filesystems unmounted.
  78. [ 6446.507106@3] systemd-shutdown[1]: Deactivating swaps.
  79. [ 6446.514169@3] systemd-shutdown[1]: All swaps deactivated.
  80. [ 6446.517627@3] systemd-shutdown[1]: Detaching loop devices.
  81. [ 6446.525701@3] systemd-shutdown[1]: All loop devices detached.
  82. [ 6446.534592@1] hdmitx: hw: avmute set to 2
  83. [ 6446.635163@1] meson_wdt ffd0f0d0.watchdog: reboot_notify: disable watchdog (event = 1)
  84. [ 6446.639812@2] fb: osd_shutdown
  85. [ 6446.640481@2] amvecm: shutdown module
  86. [ 6446.644282@1] di pre hrtimer canel 1.
  87. [ 6446.647773@1] [DI] shutdown done.
  88. [ 6446.651061@1] cvbs_out: clk_gate is already off
  89. [ 6447.155675@1] amvdac_drv_shutdown: shutdown module, private_flag:0x0
  90. [ 6447.156378@1] vout: vout2: aml_vout2_shutdown
  91. [ 6447.160721@1] vout: aml_vout_shutdown
  92. [ 6447.164377@1] aml_spdif_platform_shutdown is mute
  93. [ 6447.169100@1] gen_suspend
  94. [ 6447.172080@0] reboot: Restarting system
  95. [ 6447.281311@0] reboot reason 1
  96. bl31 reboot reason: 0xd
  97. bl31 reboot reason: 0x1
  98. system cmd 1.
  99. SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  100. bl2_stage_init 0x01
  101. bl2_stage_init 0x81
  102. hw id: 0x0000 - pwm id 0x01
  103. bl2_stage_init 0xc1
  104. bl2_stage_init 0x02
  105.  
  106. L0:00000000
  107. L1:00000703
  108. L2:00008067
  109. L3:15000020
  110. S1:00000000
  111. B2:20282000
  112. B1:a0f83180
  113.  
  114. TE: 112333
  115.  
  116. BL2 Built : 22:54:32, Apr 28 2020. g12a ga659aac-dirty - changqing.gao@droid11
  117.  
  118. Board ID = 1
  119. Set cpu clk to 24M
  120. Set clk81 to 24M
  121. Use GP1_pll as DSU clk.
  122. DSU clk: 1200 Mhz
  123. CPU clk: 1200 MHz
  124. Set clk81 to 166.6M
  125. eMMC boot @ 0
  126. sw8 s
  127. DDR driver_vesion: LPDDR4_PHY_V_0_1_15 build time: Apr 28 2020 22:54:28
  128. board id: 1
  129. Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  130. fw parse done
  131. Load ddrfw from eMMC, src: 0x00030200, des: 0xfffd0000, size: 0x0000c000, part: 0
  132. Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x00004000, part: 0
  133. PIEI prepare done
  134. fastboot data load
  135. 00000000
  136. emmc switch 1 ok
  137. 00000000
  138. emmc switch 2 ok
  139. fastboot data verify
  140. verify result: 255
  141. Cfg max: 2, cur: 1. Board id: 255. Force loop cfg
  142. DDR4 probe
  143. ddr clk to 1320MHz
  144. Load ddrfw from eMMC, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
  145. 00000000
  146. emmc switch 0 ok
  147.  
  148. dmc_version 0001
  149. Check phy result
  150. INFO : End of initialization
  151. INFO : End of read enable training
  152. INFO : End of fine write leveling
  153. INFO : End of read dq deskew training
  154. INFO : End of MPR read delay center optimization
  155. INFO : End of Write leveling coarse delay
  156. INFO : End of write delay center optimization
  157. INFO : End of read delay center optimization
  158. INFO : End of max read latency training
  159. INFO : Training has run successfully!
  160. 1D training succeed
  161. Load ddrfw from eMMC, src: 0x00020200, des: 0xfffd0000, size: 0x0000c000, part: 0
  162. Check phy result
  163. INFO : End of initialization
  164. INFO : End of 2D read delay Voltage center optimization
  165. INFO : End of 2D write delay Voltage center optimization
  166. INFO : Training has run successfully!
  167.  
  168. R0_RxClkDly_Margin==94 ps 8
  169. R0_TxDqDly_Margi==94 ps 8
  170.  
  171.  
  172. R1_RxClkDly_Margin==0 ps 0
  173. R1_TxDqDly_Margi==0 ps 0
  174.  
  175. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0001
  176.  
  177. soc_vref_reg_value 0x 00000050 0000004e 0000004f 00000051 0000004f 0000004d 0000004f 0000004f 0000004d 0000004e 0000004e 0000004f 0000004e 0000004e 0000004f 0000004e 0000004e 0000004f 0000004d 0000004d 0000004f 0000004e 0000004f 0000004d 0000004f 0000004e 00000050 0000004f 0000004e 0000004f 00000050 0000004d dram_vref_reg_value 0x 00000022
  178. 2D training succeed
  179. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:43
  180. auto size-- 65535DDR cs0 size: 2048MB
  181. DDR cs1 size: 2048MB
  182. DMC_DDR_CTRL: 00700024DDR size: 3928MB
  183. cs0 DataBus test pass
  184. cs1 DataBus test pass
  185. cs0 AddrBus test pass
  186. cs1 AddrBus test pass
  187.  
  188. non-sec scramble use zero key
  189. ddr scramble enabled
  190.  
  191. 100bdlr_step_size ps== 407
  192. result report
  193. boot times 5Enable ddr reg access
  194. 00000000
  195. emmc switch 3 ok
  196. Authentication key not yet programmed
  197. get rpmb counter error 0x00000007
  198. 00000000
  199. emmc switch 0 ok
  200. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  201. Load BL3X from eMMC, src: 0x0003c200, des: 0x0172c000, size: 0x0009c000, part: 0
  202. 0.0;M3 CHK:0;cm4_sp_mode 0
  203. MVN_1=0x00000000
  204. MVN_2=0x00000000
  205. [Image: g12a_v1.1.3386-3b31431 2019-05-21 10:41:54 luan.yuan@droid15-sz]
  206. OPS=0x10
  207. ring efuse init
  208. 2b 0c 10 00 01 2d 1d 00 00 15 39 39 36 50 43 50
  209. [0.911193 Inits done]
  210. secure task start!
  211. high task start!
  212. low task start!
  213. run into bl31
  214. NOTICE: BL31: v1.3(release):4fc40b1
  215. NOTICE: BL31: Built : 15:57:33, May 22 2019
  216. NOTICE: BL31: G12A normal boot!
  217. NOTICE: BL31: BL33 decompress pass
  218. ERROR: Error initializing runtime service opteed_fast
  219.  
  220.  
  221. U-Boot 2015.01-00022-g29f787efbf (Apr 20 2022 - 13:20:23)
  222.  
  223. DRAM: 3.5 GiB
  224. Relocation Offset is: d6eed000
  225. spi_post_bind(spifc): req_seq = 0
  226. register usb cfg[0][1] = 00000000d7f84380
  227. MMC: aml_priv->desc_buf = 0x00000000d3edd7c0
  228. aml_priv->desc_buf = 0x00000000d3edfb00
  229. SDIO Port C: 0, SDIO Port B: 1
  230. co-phase 0x2, tx-dly 0, clock 400000
  231. co-phase 0x2, tx-dly 0, clock 400000
  232. co-phase 0x2, tx-dly 0, clock 400000
  233. emmc/sd response timeout, cmd8, status=0x1ff2800
  234. emmc/sd response timeout, cmd55, status=0x1ff2800
  235. co-phase 0x2, tx-dly 0, clock 400000
  236. co-phase 0x2, tx-dly 0, clock 40000000
  237. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x162000
  238. [mmc_startup] mmc refix success
  239. [mmc_init] mmc init success
  240. In: serial
  241. Out: serial
  242. Err: serial
  243. vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
  244. vpu: driver version: v20190313
  245. vpu: detect chip type: 12
  246. vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
  247. vpu: clk_level = 7
  248. vpu: vpu_power_on
  249. vpu: set_vpu_clk
  250. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  251. vpu: set_vpu_clk finish
  252. vpu: vpu_module_init_config
  253. vpp: vpp_init
  254. vpp: g12a/b osd1 matrix rgb2yuv ..............
  255. vpp: g12a/b osd2 matrix rgb2yuv..............
  256. vpp: g12a/b osd3 matrix rgb2yuv..............
  257. cvbs: cpuid:0x2b
  258. cvbs_config_hdmipll_g12a
  259. cvbs_set_vid2_clk
  260. aml_i2c_init_port init regs for 2
  261. i2c 0xff 0x60 write failed
  262. failed to read LT8619C chip id
  263. lt8619c hdmi_to_lcd device not found.!
  264. reading boot-logo.bmp.gz
  265. 33847 bytes read in 4 ms (8.1 MiB/s)
  266. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  267. [OSD]set initrd_high: 0x3d800000
  268. [OSD]fb_addr for logo: 0x3d800000
  269. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  270. [OSD]fb_addr for logo: 0x3d800000
  271. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  272. [CANVAS]canvas init
  273. [CANVAS]addr=0x3d800000 width=3840, height=1440
  274. cvbs: outputmode[1080p60hz] is invalid
  275. vpp: vpp_matrix_update: 2
  276. set hdmitx VIC = 16
  277. config HPLL = 5940000 frac_rate = 1
  278. HPLL: 0x3b3a04f7
  279. HPLL: 0x1b3a04f7
  280. HPLLv1: 0xdb3a04f7
  281. config HPLL done
  282. j = 6 vid_clk_div = 1
  283. hdmitx phy setting done
  284. hdmitx: set enc for VIC: 16
  285. enc_vpu_bridge_reset[1319]
  286. rx version is 1.4 or below div=10
  287. set hdmitx VIC = 16
  288. config HPLL = 5940000 frac_rate = 1
  289. HPLL: 0x3b3a04f7
  290. HPLL: 0x1b3a04f7
  291. HPLLv1: 0xdb3a04f7
  292. config HPLL done
  293. j = 6 vid_clk_div = 1
  294. hdmitx phy setting done
  295. hdmitx: set enc for VIC: 16
  296. enc_vpu_bridge_reset[1319]
  297. rx version is 1.4 or below div=10
  298. [OSD]osd_hw.free_dst_data: 0,1919,0,1079
  299. USB3.0 XHCI init start
  300. Net: dwmac.ff3f0000
  301. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  302. [OSD]fb_addr for logo: 0x3d800000
  303. [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
  304. [OSD]fb_addr for logo: 0x3d800000
  305. [OSD]VPP_OFIFO_SIZE:0xfff01000
  306. card out
  307. ** Bad device mmc 1 **
  308. card out
  309. ** Bad device mmc 1 **
  310. reading logo.bmp.gz
  311. ** Unable to read file logo.bmp.gz **
  312. reading logo.bmp
  313. ** Unable to read file logo.bmp **
  314. cvbs: outputmode[1080p60hz] is invalid
  315. vpp: vpp_matrix_update: 2
  316. set hdmitx VIC = 16
  317. config HPLL = 5940000 frac_rate = 1
  318. HPLL: 0x3b3a04f7
  319. HPLL: 0x1b3a04f7
  320. HPLLv1: 0xdb3a04f7
  321. config HPLL done
  322. j = 6 vid_clk_div = 1
  323. hdmitx phy setting done
  324. hdmitx: set enc for VIC: 16
  325. enc_vpu_bridge_reset[1319]
  326. rx version is 1.4 or below div=10
  327. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  328. card out
  329. ** Bad device mmc 1 **
  330. ## Executing script at 01000000
  331. Wrong image format for "source" command
  332. reading boot.ini
  333. 6009 bytes read in 2 ms (2.9 MiB/s)
  334. ## Executing script at 01000000
  335. Unknown command 'default' - try 'help'
  336. edid extension block number : 2
  337. Dump EDID Rawdata
  338. 000000000000000023335948080000001c1b0103812f1a782e3585a656489a24
  339. 1250540000000101010101010101010101010101010101140040415823202010
  340. 0304dc0c1100001a000000fc0048444d490a2020202020202020000000fe0052
  341. 310a20202020202020202020000000fe0032303137313132330a202020200152
  342. 020312f123097f078301000065030c001000011400404158232020100304dc0c
  343. 1100001a000000fc0048444d490a2020202020202020000000fe0052310a2020
  344. 2020202020202020000000fe0032303137313132330a20202020000000fe0048
  345. 414f595520454c45430a202000000000000000000000000000000000000000b0
  346. No header found - count 0
  347. hdmitx: read edid fails.. retry..
  348. edid extension block number : 2
  349. Dump EDID Rawdata
  350. 00ffffffffffff0023335948080000001c1b0103812f1a782e3585a656489a24
  351. 1250540000000101010101010101010101010101010101140040415823202010
  352. 0304dc0c1100001a000000fc0048444d490a2020202020202020000000fe0052
  353. 310a20202020202020202020000000fe0032303137313132330a202020200152
  354. 020312f123097f078301000065030c001000011400404158232020100304dc0c
  355. 1100001a000000fc0048444d490a2020202020202020000000fe0052310a2020
  356. 2020202020202020000000fe0032303137313132330a20202020000000fe0048
  357. 414f595520454c45430a202000000000000000000000000000000000000000b0
  358. Manufacturer: HYS Model 4859 Serial Number 8
  359. EDID version: 1.3
  360. Established timings supported:
  361. Standard timings supported:
  362. Detailed mode (1) : Clock 51 MHz, 476 mm x 268 mm
  363. 1024 1056 1072 1344 hborder 0
  364. 600 616 619 635 vborder 0
  365. +hsync -vsync
  366. Monitor name: HDMI
  367. ASCII string: R1
  368. ASCII string: 20171123
  369. Has 1 extension blocks
  370. Checksum: 0x52 (valid)
  371.  
  372. CEA extension block
  373. Extension version: 3
  374. 14 bytes of CEA data
  375. Linear PCM, max channels 2
  376. Vendor-specific data block, OUI 000c03 (HDMI)
  377. Detailed mode (1) : Clock 51 MHz, 476 mm x 268 mm
  378. 1024 1056 1072 1344 hborder 0
  379. 600 616 619 635 vborder 0
  380. +hsync -vsync
  381. Checksum: 0xb0 (valid)
  382.  
  383. EDID block does NOT conform to EDID 1.3!
  384. Missing monitor ranges
  385. bestmode is custombuilt, IEEEOUI 0x000c03
  386. HDMI Mode
  387. bestmode is custombuilt, IEEEOUI 0x000c03
  388. HDMI Mode
  389. reading Image.gz
  390. 8866937 bytes read in 247 ms (34.2 MiB/s)
  391. reading meson64_odroidc4.dtb
  392. 71263 bytes read in 5 ms (13.6 MiB/s)
  393. reading uInitrd
  394. 12794636 bytes read in 353 ms (34.6 MiB/s)
  395. reading overlays/odroidc4/i2c0.dtbo
  396. 223 bytes read in 4 ms (53.7 KiB/s)
  397. reading overlays/odroidc4/i2c1.dtbo
  398. 223 bytes read in 4 ms (53.7 KiB/s)
  399. reading overlays/odroidc4/uart0.dtbo
  400. 225 bytes read in 4 ms (54.7 KiB/s)
  401. reading overlays/odroidc4/uart1.dtbo
  402. 225 bytes read in 4 ms (54.7 KiB/s)
  403. reading overlays/odroidc4/uart2.dtbo
  404. 225 bytes read in 4 ms (54.7 KiB/s)
  405. reading overlays/odroidc4/uart3.dtbo
  406. 352 bytes read in 4 ms (85.9 KiB/s)
  407. reading overlays/odroidc4/pcf8563.dtbo
  408. 469 bytes read in 5 ms (90.8 KiB/s)
  409. Uncompressed size: 24494592 = 0x175C200
  410. ## Loading init Ramdisk from Legacy Image at 03700000 ...
  411. Image Name: uInitrd
  412. Image Type: AArch64 Linux RAMDisk Image (uncompressed)
  413. Data Size: 12794572 Bytes = 12.2 MiB
  414. Load Address: 00000000
  415. Entry Point: 00000000
  416. Verifying Checksum ... OK
  417. active_slot is <NULL>
  418. Unknown command 'store' - try 'help'
  419. No dtbo patitions found
  420. load dtb from 0x1000000 ......
  421. ## Flattened Device Tree blob at 01000000
  422. Booting using the fdt blob at 0x1000000
  423. No valid dtbo image found
  424. reserving fdt memory region: addr=1000000 size=28000
  425. Loading Ramdisk to 3cbcc000, end 3d7ffacc ... OK
  426. Loading Device Tree to 000000001ffd5000, end 000000001fffffff ... OK
  427.  
  428. Starting kernel ...
  429.  
  430. uboot time: 7829001 us
  431. pwr_key=ffffffff
  432. [ 0.000000@0] Booting Linux on physical CPU 0x0
  433. [ 0.000000@0] Linux version 4.9.277-arm64 (root@odroid-stretch64) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Thu Mar 10 23:51:35 CET 2022
  434. [ 0.000000@0] Boot CPU: AArch64 Processor [411fd050]
  435. [ 0.000000@0] Machine model: Hardkernel ODROID-C4
  436. [ 0.000000@0] efi: Getting EFI parameters from FDT:
  437. [ 0.000000@0] efi: UEFI not found.
  438. [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
  439. [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
  440. [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
  441. [ 0.000000@0] Reserved memory: created DMA memory pool at 0x00000000ed800000, size 0 MiB
  442. [ 0.000000@0] ed800000 - ed800000, 0 KB, linux,ppmgr
  443. [ 0.000000@0] __reserved_mem_alloc_size, start:0x000000007f800000, end:0x0000000080000000, len:8 MiB
  444. [ 0.000000@0] 7f800000 - 80000000, 8192 KB, linux,meson-fb
  445. [ 0.000000@0] e5800000 - ed800000, 131072 KB, linux,ion-dev
  446. [ 0.000000@0] e3000000 - e5800000, 40960 KB, linux,di_cma
  447. [ 0.000000@0] cfc00000 - e3000000, 315392 KB, linux,codec_mm_cma
  448. [ 0.000000@0] cfc00000 - cfc00000, 0 KB, linux,codec_mm_reserved
  449. [ 0.000000@0] cma: Reserved 8 MiB at 0x00000000cf400000
  450. [ 0.000000@0] psci: probing for conduit method from DT.
  451. [ 0.000000@0] psci: PSCIv1.0 detected in firmware.
  452. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
  453. [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
  454. [ 0.000000@0] psci: SMC Calling Convention v1.1
  455. [ 0.000000@0] percpu: Embedded 21 pages/cpu s48088 r8192 d29736 u86016
  456. [ 0.000000@0] Detected VIPT I-cache on CPU0
  457. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 957600
  458. [ 0.000000@0] Kernel command line: coherent_pool=2M root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro console=ttyS0,115200n8 no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=custombuilt cvbsmode=576cvbs max_freq_a55=1800 maxcpus=4 voutmode=hdmi modeline=1024,600,51210,38102,60,1024,1056,1072,1344,600,616,619,635,1,0,1 disablehpd=false cvbscable= overscan=100 monitor_onoff=false logo=osd0,loaded sdrmode=auto enable_wol=0
  459. [ 0.000000@0] vout: get hdmimode: custombuilt
  460. [ 0.000000@0] vout: get cvbsmode: 576cvbs
  461. [ 0.000000@0] max cpufreq of cluster0 : 1800000kHz
  462. [ 0.000000@0] hdmitx: voutmode : 1
  463. [ 0.000000@0] fmt_para.timing
  464. [ 0.000000@0] - pixel_freq 51210, frac_freq 51210
  465. [ 0.000000@0] - h_freq 38102, v_freq 60000
  466. [ 0.000000@0] - hsync_polarity 1, vsync_polarity 0
  467. [ 0.000000@0] - h_active 1024, h_total 1344
  468. [ 0.000000@0] - h_blank 320, h_front 32, h_sync 16, h_back 272
  469. [ 0.000000@0] - v_active 600, v_total 635
  470. [ 0.000000@0] - v_blank 35, v_front 16, v_sync 3, v_back 16
  471. [ 0.000000@0] - v_sync_ln 1
  472. [ 0.000000@0] fmt_para.hdmitx_vinfo
  473. [ 0.000000@0] - name custombuilt, mode 0
  474. [ 0.000000@0] - width 1024, height 600, field_height 600
  475. [ 0.000000@0] - aspect_ratio_num 16, aspect_ratio_den 9
  476. [ 0.000000@0] - video_clk 51210000
  477. [ 0.000000@0] - htotal 1344, vtotal 635
  478. [ 0.000000@0] - viu_color_fmt 2, viu_mux 2
  479. [ 0.000000@0] fb: osd0
  480. [ 0.000000@0] fb: loaded
  481. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  482. [ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  483. [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  484. [ 0.000000@0] Memory: 3275816K/3891200K available (11964K kernel code, 1776K rwdata, 5156K rodata, 4992K init, 1412K bss, 107480K reserved, 507904K cma-reserved)
  485. [ 0.000000@0] Virtual kernel memory layout:
  486. [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  487. [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  488. [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009c30000 ( 11968 KB)
  489. [ 0.000000@0] .rodata : 0xffffff8009c30000 - 0xffffff800a140000 ( 5184 KB)
  490. [ 0.000000@0] .init : 0xffffff800a140000 - 0xffffff800a620000 ( 4992 KB)
  491. [ 0.000000@0] .data : 0xffffff800a620000 - 0xffffff800a7dc200 ( 1777 KB)
  492. [ 0.000000@0] .bss : 0xffffff800a7dc200 - 0xffffff800a93d344 ( 1413 KB)
  493. [ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
  494. [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  495. [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  496. [ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf03b60000 ( 59 MB actual)
  497. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc0ed800000 ( 3800 MB)
  498. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  499. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  500. [ 0.000000@0] Build-time adjustment of leaf fanout to 64.
  501. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  502. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  503. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  504. [ 0.000000@0] GPIO-INTC: support to detect double-edge trigger signal
  505. [ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
  506. [ 0.000000@0] Meson chip version = RevC (2B:C - 10:0)
  507. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  508. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  509. [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
  510. [ 0.000000@0] meson_g12a_media_init: register meson media clk
  511. [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
  512. [ 0.000000@0] meson_g12a_misc_init: done.
  513. [ 0.000000@0] g12a_clkc_init initialization complete
  514. [ 0.000000@0] sm1 clk probe ok
  515. [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  516. [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  517. [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  518. [ 0.000030@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194
  519. [ 0.000435@0] Console: colour dummy device 80x25
  520. [ 0.000450@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  521. [ 0.000458@0] pid_max: default: 32768 minimum: 301
  522. [ 0.000546@0] Security Framework initialized
  523. [ 0.000567@0] AppArmor: AppArmor initialized
  524. [ 0.000598@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  525. [ 0.000605@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  526. [ 0.001166@0] ftrace: allocating 39874 entries in 156 pages
  527. [ 0.063325@0] sched-energy: CPU device node has no sched-energy-costs
  528. [ 0.063337@0] CPU0: update cpu_capacity 1024
  529. [ 0.063348@0] ASID allocator initialised with 65536 entries
  530. [ 0.107396@0] secmon: can't fine clear_range
  531. [ 0.107893@0] EFI services will not be available.
  532. [ 0.155807@1] Detected VIPT I-cache on CPU1
  533. [ 0.155854@1] CPU1: update cpu_capacity 1024
  534. [ 0.155857@1] CPU1: Booted secondary processor [411fd050]
  535. [ 0.187877@2] Detected VIPT I-cache on CPU2
  536. [ 0.187910@2] CPU2: update cpu_capacity 1024
  537. [ 0.187913@2] CPU2: Booted secondary processor [411fd050]
  538. [ 0.219963@3] Detected VIPT I-cache on CPU3
  539. [ 0.219994@3] CPU3: update cpu_capacity 1024
  540. [ 0.219997@3] CPU3: Booted secondary processor [411fd050]
  541. [ 0.220081@0] Brought up 4 CPUs
  542. [ 0.220106@0] SMP: Total of 4 processors activated.
  543. [ 0.220113@0] CPU features: detected feature: Privileged Access Never
  544. [ 0.220117@0] CPU features: detected feature: User Access Override
  545. [ 0.220122@0] CPU features: detected feature: 32-bit EL0 Support
  546. [ 0.220263@0] CPU: All CPU(s) started at EL2
  547. [ 0.220282@0] alternatives: patching kernel code
  548. [ 0.222177@0] devtmpfs: initialized
  549. [ 0.236703@0] DMI not present or invalid.
  550. [ 0.236941@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  551. [ 0.236954@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  552. [ 0.237069@0] pinctrl core: initialized pinctrl subsystem
  553. [ 0.237775@0] NET: Registered protocol family 16
  554. [ 0.238949@0] schedtune: init normalization constants...
  555. [ 0.238955@0] schedtune: no energy model data
  556. [ 0.238959@0] schedtune: disabled!
  557. [ 0.247745@0] cpuidle: using governor menu
  558. [ 0.247836@0] register canvas platform driver
  559. [ 0.247868@0] register rdma platform driver
  560. [ 0.249059@0] vdso: 2 pages (1 code @ ffffff8009c37000, 1 data @ ffffff800a625000)
  561. [ 0.249072@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  562. [ 0.250135@1] DMA: preallocated 2048 KiB pool for atomic allocations
  563. [ 0.250311@1] clkmsr: clkmsr: driver init
  564. [ 0.250317@1] codec_mm_module_init
  565. [ 0.250342@1] media_configs_system_init
  566. [ 0.251255@1] pstore: using zlib compression
  567. [ 0.251683@1] console [pstore-1] enabled
  568. [ 0.251690@1] pstore: Registered ramoops as persistent store backend
  569. [ 0.251696@1] ramoops: attached 0x100000@0x7400000, ecc: 0/0
  570. [ 0.253257@1] aml_iomap: amlogic iomap probe done
  571. [ 0.253684@1] vpu: driver version: v20190329(10-sm1)
  572. [ 0.253696@1] vpu: load vpu_clk: 666666667Hz(7)
  573. [ 0.253894@1] vpu: clktree_init
  574. [ 0.253946@1] vpu: vpu_probe OK
  575. [ 0.258029@1] clkmsr: msr_clk_reg0=ffffff8008453004,msr_clk_reg2=ffffff800845500c
  576. [ 0.258046@1] clkmsr: msr_ring_reg0=ffffff80084575fc
  577. [ 0.260675@1] audio_clocks: audio_clocks_probe done
  578. [ 0.261522@1] aml_snd_reg_map[0], reg:ff661000, size:400
  579. [ 0.261540@1] aml_snd_reg_map[1], reg:ff660000, size:1000
  580. [ 0.261555@1] aml_snd_reg_map[2], reg:ff661400, size:400
  581. [ 0.261570@1] aml_snd_reg_map[3], reg:ff662000, size:1000
  582. [ 0.261583@1] aml_snd_reg_map[4], reg:ffd01000, size:1000
  583. [ 0.261596@1] aml_snd_reg_map[5], reg:ff661800, size:400
  584. [ 0.261609@1] aml_snd_reg_map[6], reg:ff661c00, size:104
  585. [ 0.261622@1] aml_snd_reg_map[7], reg:ff664000, size:104
  586. [ 0.261628@1] amlogic auge_snd_iomap probe done
  587. [ 0.263127@1] aml_vdac_config_probe: cpu_id:6, name:meson-sm1-vdac
  588. [ 0.263294@1] aml_vdac_probe: ok
  589. [ 0.263422@1] canvas_probe reg=00000000ff638000,size=2000
  590. [ 0.263440@1] canvas maped reg_base =ffffff800846c000
  591. [ 0.268789@1] rdma_probe,cpu_type:1, ver:0, len:8
  592. [ 0.269002@1] rdma_register, rdma_table_addr ffffff80084a1000 rdma_table_addr_phy cf600000 reg_buf ffffffc0ca0e8000
  593. [ 0.269012@1] rdma_register success, handle 1 table_size 32768
  594. [ 0.269018@1] set_rdma_handle video rdma handle = 1.
  595. [ 0.269048@1] classs created ok
  596. [ 0.269061@1] classs file created ok
  597. [ 0.270586@1] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  598. [ 0.270690@1] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  599. [ 0.270698@1] codec_mm_probe ok
  600. [ 0.271377@1] cvbs_out: cvbsout_probe, cpu_id:7,name:meson-sm1-cvbsout
  601. [ 0.271393@1] cvbs_out: clk path:0
  602. [ 0.271399@1] cvbs_out: error: failed to get vdac_config
  603. [ 0.271540@1] vout: vout1: register server: cvbs_vout_server
  604. [ 0.271547@1] cvbs_out: register cvbs module server ok
  605. [ 0.271553@1] vout: vout2: register server: cvbs_vout2_server
  606. [ 0.271558@1] cvbs_out: register cvbs module vout2 server ok
  607. [ 0.271565@1] cvbs_out: chrdev devno 264241152 for disp
  608. [ 0.271726@1] cvbs_out: create cdev cvbs
  609. [ 0.271734@1] cvbs_out: cvbsout_probe OK
  610. [ 0.438327@1] SCSI subsystem initialized
  611. [ 0.438556@1] usbcore: registered new interface driver usbfs
  612. [ 0.438610@1] usbcore: registered new interface driver hub
  613. [ 0.438652@1] usbcore: registered new device driver usb
  614. [ 0.438775@1] media: Linux media interface: v0.10
  615. [ 0.438828@1] Linux video capture interface: v2.00
  616. [ 0.438925@1] pps_core: LinuxPPS API ver. 1 registered
  617. [ 0.438932@1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  618. [ 0.438960@1] PTP clock support registered
  619. [ 0.439108@1] dmi: Firmware registration failed.
  620. [ 0.439413@1] secmon: reserve_mem_size:0x300000
  621. [ 0.439494@1] secmon secmon: assigned reserved memory node linux,secmon
  622. [ 0.439668@1] secmon: get page:ffffffbf00140000, 5000
  623. [ 0.439677@1] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
  624. [ 0.439683@1] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
  625. [ 0.440291@1] hdmitx: system: amhdmitx_probe start
  626. [ 0.440300@1] hdmitx: system: Ver: 20190815
  627. [ 0.440329@1] hdmitx: system: hdmitx_device.chip_type : 12
  628. [ 0.440365@1] hdmitx: system: not find match pwr-ctl
  629. [ 0.440405@1] hdmitx: system: not find drm_amhdmitx
  630. [ 0.440428@1] hdmitx: system: hpd irq = 45
  631. [ 0.440555@1] hdmitx: system: hdcp22_tx_skp failed to probe
  632. [ 0.440564@1] hdmitx: system: hdcp22_tx_esm failed to probe
  633. [ 0.440957@1] vout: vout1: register server: hdmitx_vout_server
  634. [ 0.440966@1] vout: vout2: register server: hdmitx_vout2_server
  635. [ 0.441463@1] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  636. [ 0.441479@1] hdmitx: hdmitx20: Mapped PHY: 0xff634400
  637. [ 0.441494@1] hdmitx: hdmitx20: Mapped PHY: 0xff900000
  638. [ 0.441507@1] hdmitx: hdmitx20: Mapped PHY: 0xff800000
  639. [ 0.441520@1] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
  640. [ 0.441526@1] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  641. [ 0.441533@1] hdmitx: hdmitx20: Mapped PHY: 0xff608000
  642. [ 0.441540@1] hdmitx: hdmitx20: Mapped PHY: 0xff600000
  643. [ 0.441548@1] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
  644. [ 0.441559@1] hdmitx: hw: alread display in uboot 0x10
  645. [ 0.441588@1] hdmitx: hw: avmute set to 1
  646. [ 0.441597@1] hdmitx: system: fmt_attr 444,8bit
  647. [ 0.441602@1] hdmitx: system: fmt_attr 444,8bit
  648. [ 0.441680@1] hdmitx: system: amhdmitx_probe end
  649. [ 0.441948@0] hdmitx: system: irq 80000002 0
  650. [ 0.442008@1] vout: create vout attribute OK
  651. [ 0.442142@1] vout: vout_fops_create OK
  652. [ 0.442150@1] vout: vout1: register server: nulldisp_vout_server
  653. [ 0.442238@1] vout: tvout monitor interval:500(ms), timeout cnt:20
  654. [ 0.442272@1] hdmitx: hdmitx_set_current_vmode[3878]
  655. [ 0.442278@1] hdmitx: system: recalc before custombuilt 60 1
  656. [ 0.442286@1] hdmitx: system: recalc after custombuilt 60 1
  657. [ 0.442293@1] hdmitx: system: get current mode: custombuilt
  658. [ 0.442300@1] hdmitx: system: update rx hdr info 0
  659. [ 0.442306@1] hdmitx: system: update physcial size: 16 9
  660. [ 0.442349@1] hdmitx: video: already init VIC = 0 Now VIC = 116
  661. [ 0.442357@1] hdmitx: [hdmitx_set_display] output_rgb 0, cs 0
  662. [ 0.442362@1] hdmitx: video: rx edid only support RGB format
  663. [ 0.442369@1] hdmitx: hw: div40: 0
  664. [ 0.470601@1] hdmitx: ddc w1b error 0x54 0x20 0x00
  665. [ 0.470614@1] hdmitx: this mode doesn't have frac_rate
  666. [ 0.470620@1] hdmitx: frac_rate = 1
  667. [ 0.470628@1] hdmitx: [hdmitx_set_clk_] vic == HDMI_CUSTOMBUILT, frac_freq 51210
  668. [ 0.470634@1] hdmitx: hpll_clk_out 4096800, od1 4, od2 2, od3 2
  669. [ 0.470641@1] hdmitx: config HPLL = 4096800 frac_rate = 0
  670. [ 0.470648@1] hdmitx: NO HPLL candidate - clk: 4096800, calculate HPLL
  671. [ 0.470653@1] hdmitx: m1 0x0, m2 0x0, m 0xaa
  672. [ 0.470658@1] hdmitx: m 0xaa, frac 0x6666
  673. [ 0.470716@1] hdmitx: HPLL: 0xdb0004aa
  674. [ 0.470721@1] hdmitx: [set_g12a_hpll_clk_out] HPLL set OK!
  675. [ 0.470726@1] hdmitx: config HPLL done
  676. [ 0.470734@1] hdmitx: set_hpll_od3_clk_div[643] div = 6
  677. [ 0.470743@1] hdmitx: j = 15 vid_clk_div = 1
  678. [ 0.470771@0] hdmitx: system: irq 80000001 0
  679. [ 0.512639@1] hdmitx: hw: config hdmitx IP vic = 116 cd:4 cs: 0
  680. [ 0.522740@1] hdmitx: video: Sink is HDMI device
  681. [ 0.522777@1] hdmitx: hw: set audio
  682. [ 0.522785@1] hdmitx: hw: hdmitx tx_aud_src = 0
  683. [ 0.522800@1] hdmitx: fs = 0, cd = 4, tmds_clk = 51210
  684. [ 0.522807@1] hdmitx: hw: aud_n_para = 6144
  685. [ 0.522817@1] hdmitx: hw: set channel status
  686. [ 0.522853@1] vout: init mode custombuilt set ok
  687. [ 0.522858@1] vout: aml_tvout_mode_monitor
  688. [ 0.522877@1] vout: aml_vout_probe OK
  689. [ 0.523567@1] chip type:0x2b
  690. [ 0.523857@1] MEMORY:[0+ed800000]
  691. [ 0.523867@1] ramdump_probe, storage device:data
  692. [ 0.523873@1] NO valid ramdump args:0 0
  693. [ 0.523889@1] ramdump_probe, set sticky to 8ed8
  694. [ 0.524043@1] Advanced Linux Sound Architecture Driver Initialized.
  695. [ 0.524859@1] NetLabel: Initializing
  696. [ 0.524872@1] NetLabel: domain hash size = 128
  697. [ 0.524878@1] NetLabel: protocols = UNLABELED CIPSOv4
  698. [ 0.524928@1] NetLabel: unlabeled traffic allowed by default
  699. [ 0.526333@1] clocksource: Switched to clocksource arch_sys_counter
  700. [ 0.554287@0] hdmitx: system: irq 80000001 0
  701. [ 0.574686@0] hdmitx: [0x10000104]: 0x00000001
  702. [ 0.574710@0] hdmitx: [0x10000180]: 0x000000ff
  703. [ 0.574718@0] hdmitx: [0x10000181]: 0x000000ff
  704. [ 0.574724@0] hdmitx: [0x10000182]: 0x00000003
  705. [ 0.574731@0] hdmitx: [0x10000183]: 0x00000007
  706. [ 0.574738@0] hdmitx: [0x10000184]: 0x0000003f
  707. [ 0.574744@0] hdmitx: [0x10000185]: 0x00000002
  708. [ 0.574750@0] hdmitx: [0x10000187]: 0x000000ff
  709. [ 0.574757@0] hdmitx: [0x10000188]: 0x00000003
  710. [ 0.577112@3] VFS: Disk quotas dquot_6.6.0
  711. [ 0.577186@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  712. [ 0.577380@3] AppArmor: AppArmor Filesystem Enabled
  713. [ 0.589489@3] NET: Registered protocol family 2
  714. [ 0.589605@3] IP idents hash table entries: 65536 (order: 7, 524288 bytes)
  715. [ 0.591495@3] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  716. [ 0.591718@3] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  717. [ 0.592169@3] TCP: Hash tables configured (established 32768 bind 32768)
  718. [ 0.592276@3] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  719. [ 0.592343@3] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  720. [ 0.592611@3] NET: Registered protocol family 1
  721. [ 0.594276@3] Unpacking initramfs...
  722. [ 0.970381@0] hdmitx: system: plugin
  723. [ 1.082192@3] Freeing initrd memory: 12492K
  724. [ 1.093570@2] hw perfevents: clusterb_enabled = 0
  725. [ 1.093592@2] hw perfevents: cpumasks 0xf, 0x0
  726. [ 1.093626@2] hw perfevents: cluster A irq = 18
  727. [ 1.093715@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  728. [ 1.096789@2] audit: initializing netlink subsys (disabled)
  729. [ 1.096893@2] audit: type=2000 audit(1.048:1): initialized
  730. [ 1.097889@2] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  731. [ 1.102694@0] hdmitx: edid: EDID Parser:
  732. [ 1.102726@0] [RX]-up_phy_addr = 1
  733. [ 1.102759@0] hdmitx: edid: get dtd0 vic: 116
  734. [ 1.102773@0] hdmitx: edid: find IEEEOUT
  735. [ 1.102779@0] hdmitx: edid: set default vic
  736. [ 1.102810@0] hdmitx: edid: check sum valid
  737. [ 1.102817@0] hdmitx: edid: check sum valid
  738. [ 1.102829@0] hdmitx: edid: update rx hdr info 0 at edid parsing
  739. [ 1.102838@0] hdmitx: edid: check sum valid
  740. [ 1.102844@0] hdmitx: edid: check sum valid
  741. [ 1.102853@0] hdmitx: edid: blk0 raw data
  742. [ 1.102888@0] hdmitx: edid:
  743. [ 1.102888@0] 00ffffffffffff0023335948080000001c1b0103812f1a782e3585a656489a24
  744. [ 1.102888@0] 1250540000000101010101010101010101010101010101140040415823202010
  745. [ 1.102888@0] 0304dc0c1100001a000000fc0048444d490a2020202020202020000000fe0052
  746. [ 1.102888@0] 310a20202020202020202020000000fe0032303137313132330a202020200152
  747. [ 1.102888@0]
  748. [ 1.102888@0]
  749. [ 1.102906@0] hdmitx: edid: blk1 raw data
  750. [ 1.102940@0] hdmitx: edid:
  751. [ 1.102940@0] 020312f123097f078301000065030c001000011400404158232020100304dc0c
  752. [ 1.102940@0] 1100001a000000fc0048444d490a2020202020202020000000fe0052310a2020
  753. [ 1.102940@0] 2020202020202020000000fe0032303137313132330a20202020000000fe0048
  754. [ 1.102940@0] 414f595520454c45430a202000000000000000000000000000000000000000b0
  755. [ 1.102940@0]
  756. [ 1.102940@0]
  757. [ 1.102959@0] hdmitx: system: update physcial size: 470 260
  758. [ 1.102965@0] hdmitx: video: Sink is HDMI device
  759. [ 1.102976@0] hdmitx: hw: set audio
  760. [ 1.102983@0] hdmitx: hw: hdmitx tx_aud_src = 0
  761. [ 1.103004@0] hdmitx: fs = 0, cd = 4, tmds_clk = 51210
  762. [ 1.103012@0] hdmitx: hw: aud_n_para = 6144
  763. [ 1.103027@0] hdmitx: hw: set channel status
  764. [ 1.103068@0] hdmitx: system: get current mode: custombuilt
  765. [ 1.103076@0] hdmitx: system: update rx hdr info 0
  766. [ 1.103082@0] hdmitx: system: update physcial size: 470 260
  767. [ 1.103128@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 116
  768. [ 1.103136@0] hdmitx: system: change to HDMI mode
  769. [ 1.107246@3] Registering sdcardfs 0.1
  770. [ 1.113278@2] NET: Registered protocol family 38
  771. [ 1.113307@2] Key type asymmetric registered
  772. [ 1.113316@2] Asymmetric key parser 'x509' registered
  773. [ 1.113584@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  774. [ 1.113601@2] io scheduler noop registered (default)
  775. [ 1.113609@2] io scheduler deadline registered
  776. [ 1.113781@2] io scheduler cfq registered
  777. [ 1.116043@2] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
  778. [ 1.117104@0] random: fast init done
  779. [ 1.117152@0] random: crng init done
  780. [ 1.117505@3] gpiomem-aml ff634000.gpiomem: Initialised: GPIO register area is 2
  781. [ 1.117719@2] gpiomem-aml ff634000.gpiomem: Initialised: Registers at start:0xff634000 end:0xff634fff size:0x00000fff
  782. [ 1.117732@2] gpiomem-aml ff634000.gpiomem: Initialised: Registers at start:0xff800000 end:0xff800fff size:0x00000fff
  783. [ 1.117875@2] [drm] Initialized
  784. [ 1.118003@2] mali ffe40000.bifrost: Continuing without Mali regulator control
  785. [ 1.118123@2] mali ffe40000.bifrost: max pp is 2
  786. [ 1.118134@2] mali ffe40000.bifrost: set min pp to default 1
  787. [ 1.118142@2] mali ffe40000.bifrost: min pp is 1
  788. [ 1.118150@2] mali ffe40000.bifrost: min clk is 4
  789. [ 1.118175@2] mali ffe40000.bifrost: hiu io source 0xffffff80084d9000
  790. [ 1.118188@2] mali ffe40000.bifrost: hiu io source 0xffffff80084db000
  791. [ 1.118196@2] mali ffe40000.bifrost: num of pp used most of time 1
  792. [ 1.118204@2] mali ffe40000.bifrost: clock dvfs cfg table size is 6
  793. [ 1.118420@2] mali ffe40000.bifrost: max clk set 4
  794. [ 1.118431@2] mali ffe40000.bifrost: max clk is 4
  795. [ 1.118440@2] mali ffe40000.bifrost: turbo clk set to 5
  796. [ 1.118448@2] mali ffe40000.bifrost: turbo clk is 5
  797. [ 1.118456@2] mali ffe40000.bifrost: default clk set to 4
  798. [ 1.118463@2] mali ffe40000.bifrost: default clk is 4
  799. [ 1.118474@2] mali ffe40000.bifrost: ====================0====================
  800. [ 1.118474@2] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
  801. [ 1.118486@2] mali ffe40000.bifrost: ====================1====================
  802. [ 1.118486@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
  803. [ 1.118499@2] mali ffe40000.bifrost: ====================2====================
  804. [ 1.118499@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
  805. [ 1.118510@2] mali ffe40000.bifrost: ====================3====================
  806. [ 1.118510@2] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
  807. [ 1.118523@2] mali ffe40000.bifrost: ====================4====================
  808. [ 1.118523@2] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846
  809. [ 1.118535@2] mali ffe40000.bifrost: ====================5====================
  810. [ 1.118535@2] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846
  811. [ 1.118545@2] mali ffe40000.bifrost: clock dvfs table size is 6
  812. [ 1.120067@2] mali_plat=ffffff800a6b36d8
  813. [ 1.120270@2] meson_gcooldev is null, no set min status
  814. [ 1.120280@2] gpu cooling register okay with err=0
  815. [ 1.120370@2] meson_gcooldev is null, no set min status
  816. [ 1.120379@2] gpu core cooling register okay with err=0
  817. [ 1.120417@2] shader_present=1, tiler_present=1, l2_present=1
  818. [ 1.120503@2] Mali_pwr_on:gpu_irq : 200
  819. [ 1.120750@2] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
  820. [ 1.121937@3] mali ffe40000.bifrost: Probed as mali0
  821. [ 1.122638@3] Unable to detect cache hierarchy for CPU 0
  822. [ 1.128245@3] loop: module loaded
  823. [ 1.128765@3] mtdoops: mtd device (mtddev=name/number) must be supplied
  824. [ 1.129337@3] libphy: Fixed MDIO Bus: probed
  825. [ 1.130249@3] REG0:Addr = ffffff80084f1540
  826. [ 1.130272@3] ee eth reset:Addr = ffffff80084f3008
  827. [ 1.130285@3] read auto_cali_idx fail
  828. [ 1.130294@3] Not set cali_val for REG1
  829. [ 1.130899@0] meson6-dwmac ff3f0000.ethernet: no reset control found
  830. [ 1.130914@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
  831. [ 1.130922@0] Ring mode enabled
  832. [ 1.130930@0] DMA HW capability register supported
  833. [ 1.130937@0] Normal descriptors
  834. [ 1.130942@0] RX Checksum Offload Engine supported
  835. [ 1.130948@0] COE Type 2
  836. [ 1.130954@0] TX Checksum insertion supported
  837. [ 1.130960@0] Wake-Up On Lan supported
  838. [ 1.131019@0] eth%d: device MAC address 00:1e:06:48:94:c6
  839. [ 1.131027@0] Enable RX Mitigation via HW Watchdog Timer
  840. [ 1.151326@2] libphy: stmmac: probed
  841. [ 1.151349@2] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  842. [ 1.151358@2] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
  843. [ 1.153092@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  844. [ 1.153111@2] ehci-pci: EHCI PCI platform driver
  845. [ 1.153225@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  846. [ 1.153725@2] usbcore: registered new interface driver cdc_acm
  847. [ 1.153736@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  848. [ 1.153804@2] usbcore: registered new interface driver usb-storage
  849. [ 1.153935@2] usbcore: registered new interface driver usbserial
  850. [ 1.153994@2] usbcore: registered new interface driver usbserial_generic
  851. [ 1.154043@2] usbserial: USB Serial support registered for generic
  852. [ 1.154574@0] mousedev: PS/2 mouse device common for all mice
  853. [ 1.155020@0] i2c /dev entries driver
  854. [ 1.157095@0] lirc_helper: wakeupkey 0xffffffff, protocol 0x1
  855. [ 1.157651@0] device-mapper: uevent: version 1.0.3
  856. [ 1.158011@3] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  857. [ 1.160268@3] ledtrig-cpu: registered to indicate activity on CPUs
  858. [ 1.160792@3] hidraw: raw HID events driver (C) Jiri Kosina
  859. [ 1.161201@2] usbcore: registered new interface driver usbhid
  860. [ 1.161213@2] usbhid: USB HID core driver
  861. [ 1.162100@2] value of voltage_tolerance 0
  862. [ 1.162112@2] meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
  863. [ 1.162118@2] value of gp1_clk_target 0
  864. [ 1.163135@2] dvfs [meson_cpufreq_init] - cluster 0 freq 1908000
  865. [ 1.163146@2] dvfs [meson_cpufreq_init] - cluster 0 freq 2016000
  866. [ 1.163152@2] dvfs [meson_cpufreq_init] - cluster 0 freq 2100000
  867. [ 1.163176@2] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
  868. [ 1.165517@2] ff803000.serial: clock gate not found
  869. [ 1.165582@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80084f9000
  870. [ 1.165629@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 30, base_baud = 1500000) is a meson_uart
  871. [ 1.165649@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
  872. [ 1.218599@1] clear:c4000000, free:c4000000, tick:672745 us
  873. [ 3.569906@2] console [ttyS0] enabled
  874. [ 3.574510@2] ff804000.serial: clock gate not found
  875. [ 3.578427@2] meson_uart ff804000.serial: ==uart4 reg addr = ffffff80084fb000
  876. [ 3.585527@2] ff804000.serial: ttyS4 at MMIO 0xff804000 (irq = 31, base_baud = 1500000) is a meson_uart
  877. [ 3.595858@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff80084fd000
  878. [ 3.602000@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 42, base_baud = 1500000) is a meson_uart
  879. [ 3.612040@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008601000
  880. [ 3.618456@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 43, base_baud = 1500000) is a meson_uart
  881. [ 3.628511@2] meson_uart ffd22000.serial: ==uart3 reg addr = ffffff8008603000
  882. [ 3.634926@2] ffd22000.serial: ttyS3 at MMIO 0xffd22000 (irq = 44, base_baud = 1500000) is a meson_uart
  883. [ 3.645518@2] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008626000
  884. [ 3.655699@2] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff8008631080
  885. [ 3.667445@2] aml_dma ff63e000.aml_dma: Aml dma
  886. [ 3.672599@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
  887. [ 3.679237@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
  888. [ 3.683719@2] gpio-keypad: probe of ff800000.gpio_keypad failed with error -22
  889. [ 3.690969@2] efusekeynum: 1
  890. [ 3.693572@2] efusekeyname: uuid offset: 0 size: 32
  891. [ 3.700577@2] efuse efuse: probe OK!
  892. [ 3.709355@2] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
  893. [ 3.712201@2] ge2d: ge2d_init_module
  894. [ 3.714708@2] ge2d: ge2d_dev major:236
  895. [ 3.718864@2] ge2d: clock source clk_ge2d_gate ffffffc019c3cf40
  896. [ 3.724146@2] ge2d: clock clk_ge2d source ffffffc019c3cfc0
  897. [ 3.729601@2] ge2d: clock source clk_vapb_0 ffffffc019c1b000
  898. [ 3.735210@2] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
  899. [ 3.742504@2] ge2d: ge2d clock is 499 MHZ
  900. [ 3.746404@2] ge2d: find address resource
  901. [ 3.750389@2] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff8008690000
  902. [ 3.758175@2] ge2d: reserved mem init failed
  903. [ 3.762427@2] ge2d: ge2d: pdev=ffffffc0ca1d2000, irq=49, clk=ffffffc019c3cf40
  904. [ 3.769559@2] ge2d: ge2d start monitor
  905. [ 3.773650@2] [tsync_pcr_init]init success.
  906. [ 3.773756@3] ge2d: ge2d workqueue monitor start
  907. [ 3.782185@2] amvideom vsync irq: 50
  908. [ 3.785587@2] create_ge2d_work_queue video task ok
  909. [ 3.790819@2] fb: osd_init_module
  910. [ 3.793991@2] fb: viu vsync irq: 50
  911. [ 3.797104@2] fb: viu2 vsync irq: 66
  912. [ 3.800730@2] 0x000000db:Y=db,U=0,V=0
  913. [ 3.804283@2] 0x000000dc:Y=dc,U=0,V=0
  914. [ 3.807927@2] 0x000000dd:Y=dd,U=0,V=0
  915. [ 3.811561@2] 0x000000de:Y=de,U=0,V=0
  916. [ 3.815206@2] 0x000000df:Y=df,U=0,V=0
  917. [ 3.818840@2] 0x000000e0:Y=e0,U=0,V=0
  918. [ 3.822750@2] fb: osd_rdma_init: rdma_table p=0xcf608000,op=0xcf608000 , v=0xffffff800863d000
  919. [ 3.831008@2] rdma_register, rdma_table_addr ffffff8008681000 rdma_table_addr_phy cf609000 reg_buf ffffffc0ca0f4000
  920. [ 3.841384@2] rdma_register success, handle 2 table_size 4096
  921. [ 3.847097@2] fb: osd_rdma_init:osd rdma handle = 2.
  922. [ 3.852072@2] fb: mem_size: 0x800000
  923. [ 3.855590@2] fb: mem_size: 0x4b80000
  924. [ 3.859228@2] fb: mem_size: 0x100000
  925. [ 3.862781@2] fb: mem_size: 0x100000
  926. [ 3.866334@2] fb: mem_size: 0x800000
  927. [ 3.869881@2] fb: failed to init reserved memory
  928. [ 3.874490@2] fb: fb def : 1024 600 1024 1200 32
  929. [ 3.879082@2] fb: init fbdev bpp is:32
  930. [ 3.883405@2] fb: malloc_osd_memory, cma:ffffff800a897b58
  931. [ 3.883408@2] fb: malloc_osd_memory, 1232, base:0x00000000cf400000, size:8388608
  932. [ 3.883425@2] fb: use ion buffer for fb memory, fb_index=0
  933. [ 3.883427@2] fb: OSD0 as afbcd mode,afbc_type=2
  934. [ 3.904005@2] meson-fb meson-fb: create ion_client ffffffc019c15a80, handle=ffffffc019c1b740
  935. [ 3.904011@2] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
  936. [ 3.904013@2] fb: 0, phy: 0x00000000e5800000, vir:0xffffff800a943000, size=77312K
  937. [ 3.904013@2]
  938. [ 3.904017@2] fb: Frame buffer memory assigned at
  939. [ 3.904017@2] fb: 0, phy: 0x00000000e5800000, vir:0xffffff800a943000, size=77312K
  940. [ 3.904017@2]
  941. [ 3.904019@2] fb: 0, phy: 0x00000000e5800000, vir:0xffffff800a943000, size=77312K
  942. [ 3.904019@2]
  943. [ 3.904021@2] fb: logo_index=0,fb_index=0
  944. [ 3.904023@2] fb: ---------------clear fb0 memory ffffff800a943000
  945. [ 3.919887@2] fb: osd[0] canvas.idx =0x40
  946. [ 3.919888@2] fb: osd[0] canvas.addr=0xe5800000
  947. [ 3.919889@2] fb: osd[0] canvas.width=4096
  948. [ 3.919890@2] fb: osd[0] canvas.height=1200
  949. [ 3.919891@2] fb: osd[0] frame.width=1024
  950. [ 3.919892@2] fb: osd[0] frame.height=600
  951. [ 3.919893@2] fb: osd[0] out_addr_id =0x1
  952. [ 3.952111@2] Console: switching to colour frame buffer device 128x37
  953. [ 4.081687@2] fb: osd[0] enable: 1 (swapper/0)
  954. [ 4.099979@2] fb: set osd0 reverse as NONE
  955. [ 4.114549@2] fb: osd probe OK
  956. [ 4.114652@2] hdmitx: hdcp: hdmitx_hdcp_init
  957. [ 4.116450@2] vout: vout2: create vout2 attribute OK
  958. [ 4.121274@2] vout: vout2: vout2_fops_create OK
  959. [ 4.125885@2] vout: vout2: clktree_init
  960. [ 4.129487@2] vout: vout2: register server: nulldisp_vout2_server
  961. [ 4.135645@2] vout: vout2: init mode null set ok
  962. [ 4.140143@2] vout: vout2: aml_vout2_probe OK
  963. [ 4.144586@2] DI: di_module_init ok.
  964. [ 4.148212@2] DI: di_probe:
  965. [ 4.150811@2] DI: di_probe: major 510
  966. [ 4.154630@2] deinterlace deinterlace: assigned reserved memory node linux,di_cma
  967. [ 4.161901@2] di:flag_cma=1
  968. [ 4.164668@2] DI: CMA size 0x2800000.
  969. [ 4.168322@2] pre_irq:64
  970. [ 4.170825@2] post_irq:65
  971. [ 4.173411@2] DI: di_probe allocate rdma channel 0.
  972. [ 4.178277@2] di_get_vpu_clkb: get clk vpu error.
  973. [ 4.182953@2] DI: vpu clkb <334000000, 667000000>
  974. [ 4.187688@2] get clkb rate:333333328
  975. [ 4.191297@2] DI:enable vpu clkb.
  976. [ 4.194584@2] 0x000000e1:Y=e1,U=0,V=0
  977. [ 4.198197@2] 0x000000e2:Y=e2,U=0,V=0
  978. [ 4.201847@2] 0x000000e3:Y=e3,U=0,V=0
  979. [ 4.205487@2] 0x000000f0:Y=f0,U=0,V=0
  980. [ 4.209126@2] 0x000000f1:Y=f1,U=0,V=0
  981. [ 4.212765@2] 0x000000f2:Y=f2,U=0,V=0
  982. [ 4.216404@2] 0x000000f3:Y=f3,U=0,V=0
  983. [ 4.220045@2] 0x000000f4:Y=f4,U=0,V=0
  984. [ 4.223684@2] 0x000000f5:Y=f5,U=0,V=0
  985. [ 4.227325@2] 0x000000f6:Y=f6,U=0,V=0
  986. [ 4.230967@2] 0x000000f7:Y=f7,U=0,V=0
  987. [ 4.234605@2] 0x000000f8:Y=f8,U=0,V=0
  988. [ 4.238237@2] 0x000000f9:Y=f9,U=0,V=0
  989. [ 4.241885@2] 0x000000fa:Y=fa,U=0,V=0
  990. [ 4.245524@2] 0x000000fb:Y=fb,U=0,V=0
  991. [ 4.249164@2] 0x000000fc:Y=fc,U=0,V=0
  992. [ 4.252807@2] 0x000000fd:Y=fd,U=0,V=0
  993. [ 4.256445@2] 0x000000fe:Y=fe,U=0,V=0
  994. [ 4.260085@2] 0x000000ff:Y=ff,U=0,V=0
  995. [ 4.263725@2] 0x0000003a:Y=3a,U=0,V=0
  996. [ 4.267365@2] 0x0000003b:Y=3b,U=0,V=0
  997. [ 4.271004@2] 0x0000003c:Y=3c,U=0,V=0
  998. [ 4.274646@2] 0x0000003d:Y=3d,U=0,V=0
  999. [ 4.278277@2] 0x0000003e:Y=3e,U=0,V=0
  1000. [ 4.281924@2] 0x0000003f:Y=3f,U=0,V=0
  1001. [ 4.285566@2] DI: support multi decoding 61~62~63.
  1002. [ 4.290451@2] DI: di_probe:Di use HRTIMER
  1003. [ 4.294703@2] DI: di_probe:ok
  1004. [ 4.297327@2] dim:dim_module_init
  1005. [ 4.300824@2] dim:dim_module_init finish
  1006. [ 4.304465@2] dil:dil_init.
  1007. [ 4.307414@2] dil:dil_init ok.
  1008. [ 4.310284@2] vdin_drv_init: major 509
  1009. [ 4.314200@2] vdin_drv_init: vdin driver init done
  1010. [ 4.318764@2] [viuin..]viuin_init_module viuin module init
  1011. [ 4.324473@2] [viuin..]viuin_probe probe ok.
  1012. [ 4.328887@2] [RX]-hdmirx: hdmirx_init.
  1013. [ 4.332302@2] ESM HLD: Initializing...
  1014. [ 4.336893@2] amlvid:info: amlvideo_init called[ 4.340378@2] amlvid:info: amlvideo_create_instance called
  1015. [ 4.345813@2] amlvid:info: v4l2_dev.name=:amlvideo-000
  1016. [ 4.351074@2] amlvideo-000: V4L2 device registered as video10
  1017. [ 4.356637@2] amlvid:info: amlvideo_create_instance called
  1018. [ 4.362107@2] amlvid:info: v4l2_dev.name=:amlvideo-001
  1019. [ 4.367602@2] amlvideo-001: V4L2 device registered as video23
  1020. [ 4.373133@2] PPMGRDRV: warn: ppmgr module init func called
  1021. [ 4.378634@2] PPMGRDRV: info: ppmgr_driver_probe called
  1022. [ 4.383751@2] Reserved memory: failed to init DMA memory pool at 0x00000000ed800000, size 0 MiB
  1023. [ 4.392356@2] PPMGRDRV: info: ppmgr_dev major:507
  1024. [ 4.397636@2] ionvideo-000: V4L2 device registered as video13
  1025. [ 4.402856@2] ionvideo-001: V4L2 device registered as video14
  1026. [ 4.408574@2] ionvideo-002: V4L2 device registered as video15
  1027. [ 4.414289@2] ionvideo-003: V4L2 device registered as video16
  1028. [ 4.419994@2] ionvideo-004: V4L2 device registered as video17
  1029. [ 4.425723@2] ionvideo-005: V4L2 device registered as video18
  1030. [ 4.431454@2] ionvideo-006: V4L2 device registered as video19
  1031. [ 4.437156@2] ionvideo-007: V4L2 device registered as video20
  1032. [ 4.442884@2] ionvideo-008: V4L2 device registered as video21
  1033. [ 4.448505@2] ionvid: info: Video Technology Magazine Ion Video
  1034. [ 4.454407@2] ionvid: info: Capture Board ver 1.0 successfully loaded
  1035. [ 4.461219@2] videosync_create_instance dev_s ffffffc019dd7400,dev_s->dev ffffffc0c9df5500
  1036. [ 4.469055@2] videosync_create_instance reg videosync.0
  1037. [ 4.474310@2] aml_vecm_init:module init
  1038. [ 4.474314@3] videosync_thread started
  1039. [ 4.482007@2]
  1040. [ 4.482007@2] VECM probe start
  1041. [ 4.486764@2] Can't find detect_colorbar.
  1042. [ 4.490633@2] Can't find detect_face.
  1043. [ 4.494353@2] Can't find detect_corn.
  1044. [ 4.498064@2] Can't find wb_sel.
  1045. [ 4.501374@2] hdr:Can't find cfg_en_osd_100.
  1046. [ 4.505708@2] amlogic, vecm[ 4.508301@2] vlock dt support: 1
  1047. [ 4.511607@2] vlock dt new_fsm: 0
  1048. [ 4.514886@2] vlock dt hwver: 0
  1049. [ 4.517997@2] vlock dt phlock_en: 0
  1050. [ 4.521485@2] Can't find vlock_en.
  1051. [ 4.524940@2] Can't find vlock_mode.
  1052. [ 4.528582@2] Can't find vlock_pll_m_limit.
  1053. [ 4.532833@2] Can't find vlock_line_limit.
  1054. [ 4.536988@2] param_config vlock_en:1 md=0x4
  1055. [ 4.541240@2] vlock: maxLine 524,maxPixel 1715
  1056. [ 4.545675@2] vlock_status_init vlock_en:1
  1057. [ 4.549729@2] aml_vecm_probe: ok
  1058. [ 4.553006@2] amdolby_vision_init:module init
  1059. [ 4.557527@2]
  1060. [ 4.557527@2] amdolby_vision probe start & ver: 20181220
  1061. [ 4.564301@2]
  1062. [ 4.564301@2] cpu_id=2 tvmode=0
  1063. [ 4.566114@0] hdmitx: hdmitx_set_drm_pkt: tf=1, cf=1, colormetry=0
  1064. [ 4.575437@2] dolby_vision_init_receiver(dvel)
  1065. [ 4.579722@2] dolby_vision_init_receiver: dvel
  1066. [ 4.584255@2] amdolby_vision_probe: ok
  1067. [ 4.587863@2] dovi disable in uboot
  1068. [ 4.592089@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  1069. [ 4.599976@2] meson-mmc: >>>>>>>>hostbase ffffff80086c0000, dmode
  1070. [ 4.605726@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1071. [ 4.611193@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  1072. [ 4.654353@2] meson-mmc: meson_mmc_probe() : success!
  1073. [ 4.665263@2] meson-mmc: >>>>>>>>hostbase ffffff80086c9000, dmode
  1074. [ 4.665843@2] meson-mmc: gpio_cd = 1ca
  1075. [ 4.706355@2] meson-mmc: meson_mmc_probe() : success!
  1076. [ 4.708211@2] cectx ff80023c.aocec: cec driver date:2019/10/22: finetune ARB rising time
  1077. [ 4.708211@2]
  1078. [ 4.715797@2] cectx ff80023c.aocec: compatible:amlogic, aocec-sm1
  1079. [ 4.721593@2] cectx ff80023c.aocec: cecb_ver:0x2
  1080. [ 4.726157@2] cectx ff80023c.aocec: line_reg:0x1
  1081. [ 4.730766@2] cectx ff80023c.aocec: line_bit:0x3
  1082. [ 4.735343@2] cectx ff80023c.aocec: ee_to_ao:0x1
  1083. [ 4.740145@2] input: cec_input as /devices/virtual/input/input0
  1084. [ 4.745966@2] cectx ff80023c.aocec: not find 'port_num'
  1085. [ 4.751064@2] cectx ff80023c.aocec: using cec:1
  1086. [ 4.755563@2] cectx ff80023c.aocec: no hdmirx regs
  1087. [ 4.760309@2] cectx ff80023c.aocec: no hhi regs
  1088. [ 4.766287@2] irq cnt:2, a:48, b47
  1089. [ 4.768575@2] cectx ff80023c.aocec: wakeup_reason:0x0
  1090. [ 4.773381@2] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
  1091. [ 4.778793@0] cectx ff80023c.aocec: aml_cec_probe success end
  1092. [ 4.784811@0] unifykey: storage in base: 0xffffffc005000000
  1093. [ 4.790101@0] unifykey: storage out base: 0xffffffc005040000
  1094. [ 4.795724@0] unifykey: storage block base: 0xffffffc005080000
  1095. [ 4.801572@0] unifykey: probe done!
  1096. [ 4.805388@0] unifykey: no efuse-version set, use default value: -1
  1097. [ 4.811238@0] unifykey: key unify config unifykey-num is 14
  1098. [ 4.816876@0] unifykey: key unify fact unifykey-num is 17
  1099. [ 4.822162@0] unifykey: unifykey_devno: 1f600000
  1100. [ 4.826829@2] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
  1101. [ 4.826913@0] unifykey: device unifykeys created ok
  1102. [ 4.826971@0] unifykey: aml_unifykeys_init done!
  1103. [ 4.827154@0] meson ts init
  1104. [ 4.827207@0] tsensor id: 0
  1105. [ 4.827353@0] r1p1_tsensor_read valid cnt is 0
  1106. [ 4.827366@0] tsensor trim info: 0xfa000077!
  1107. [ 4.827368@0] tsensor hireboot: 0xc0ff2a30
  1108. [ 4.827503@0] meson ts init
  1109. [ 4.827528@0] tsensor id: 1
  1110. [ 4.827635@0] r1p1_tsensor_read valid cnt is 0
  1111. [ 4.827643@0] tsensor trim info: 0xfa000055!
  1112. [ 4.827645@0] tsensor hireboot: 0xc0ff2a40
  1113. [ 4.827773@0] audio_dsp: [dsp]register dsp to char divece(257)
  1114. [ 4.827920@0] amaudio: amaudio: driver amaudio init!
  1115. [ 4.828220@0] amaudio: amaudio_init - amaudio: driver amaudio succuess!
  1116. [ 4.828765@0] amlkaraoke init success!
  1117. [ 4.828934@0] sysled: module init
  1118. [ 4.829178@0] meson_wdt ffd0f0d0.watchdog: start watchdog
  1119. [ 4.829181@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
  1120. [ 4.829371@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
  1121. [ 4.829782@0] amlogic rfkill init
  1122. [ 4.830126@0] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
  1123. [ 4.830129@0] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
  1124. [ 4.830980@0] dmc_monitor_probe
  1125. [ 4.831690@0] atv_demod: aml_atvdemod_init: OK, atv demod version: V2.15.
  1126. [ 4.831814@0] defendkey ff630218.defendkey: Reserved memory is not enough!
  1127. [ 4.831823@0] defendkey: probe of ff630218.defendkey failed with error -22
  1128. [ 4.834399@0] Error: Driver 'spdif-dit' is already registered, aborting...
  1129. [ 4.834702@0] asoc debug: aml_audio_controller_probe-130
  1130. [ 4.835840@0] hdmitx: audio: aout notify format CT_PCM
  1131. [ 4.835842@0] hdmitx: hw: set audio
  1132. [ 4.835843@0] hdmitx: hw: hdmitx tx_aud_src = 0
  1133. [ 4.835856@0] hdmitx: fs = 3, cd = 4, tmds_clk = 51210
  1134. [ 4.835858@0] hdmitx: hw: aud_n_para = 6144
  1135. [ 4.835866@0] hdmitx: hw: set channel status
  1136. [ 4.835896@0] hdmitx: audio: Audio Type: PCM
  1137. [ 4.835897@0] hdmitx: audio: set audio param
  1138. [ 4.835914@0] aml_spdif_platform_probe, register soc platform
  1139. [ 4.836402@0] audio-ddr-manager ff660000.audiobus:ddr_manager: 0, irqs toddr 32, frddr 36
  1140. [ 4.836415@0] audio-ddr-manager ff660000.audiobus:ddr_manager: 1, irqs toddr 33, frddr 37
  1141. [ 4.836427@0] audio-ddr-manager ff660000.audiobus:ddr_manager: 2, irqs toddr 34, frddr 38
  1142. [ 4.836438@0] audio-ddr-manager ff660000.audiobus:ddr_manager: 3, irqs toddr 35, frddr 39
  1143. [ 4.836885@0] audiolocker_platform_probe
  1144. [ 4.837949@0] Register vad
  1145. [ 4.838372@0] aml_dai_spdif_probe
  1146. [ 4.841390@0] asoc-aml-card odroid_hdmi: dit-hifi <-> SPDIF mapping ok
  1147. [ 4.841808@0] snd_card_add_kcontrols card:ffffffc019da9818
  1148. [ 4.841816@0] effect_v2 is not init
  1149. [ 4.841819@0] Failed to add VAD controls
  1150. [ 4.841829@0] eq/drc v1 function enable
  1151. [ 4.841832@0] no node audio_effect for eq/drc info!
  1152. [ 4.841833@0] Failed to add audio effects v1 controls
  1153. [ 4.841934@0] Netfilter messages via NETLINK v0.30.
  1154. [ 4.842015@0] Initializing XFRM netlink socket
  1155. [ 4.842026@0] NET: Registered protocol family 17
  1156. [ 4.842049@0] Key type dns_resolver registered
  1157. [ 4.842836@0] Registered swp emulation handler
  1158. [ 4.845834@0] Registered cp15_barrier emulation handler
  1159. [ 4.845843@0] Registered setend emulation handler
  1160. [ 4.845867@0] disable EAS feature
  1161. [ 4.856349@3] registered taskstats version 1
  1162. [ 4.856533@3] AppArmor: AppArmor sha1 policy hashing enabled
  1163. [ 4.861402@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
  1164. [ 4.864107@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1165. [ 4.864123@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  1166. [ 4.864430@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
  1167. [ 4.864463@0] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
  1168. [ 4.864587@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1169. [ 4.864590@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1170. [ 4.864592@0] usb usb1: Product: xHCI Host Controller
  1171. [ 4.864594@0] usb usb1: Manufacturer: Linux 4.9.277-arm64 xhci-hcd
  1172. [ 4.864596@0] usb usb1: SerialNumber: xhci-hcd.0.auto
  1173. [ 4.864995@1] hub 1-0:1.0: USB hub found
  1174. [ 4.865020@1] hub 1-0:1.0: 2 ports detected
  1175. [ 4.865273@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  1176. [ 4.865283@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  1177. [ 4.865337@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  1178. [ 4.865412@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  1179. [ 4.865415@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1180. [ 4.865417@1] usb usb2: Product: xHCI Host Controller
  1181. [ 4.865419@1] usb usb2: Manufacturer: Linux 4.9.277-arm64 xhci-hcd
  1182. [ 4.865421@1] usb usb2: SerialNumber: xhci-hcd.0.auto
  1183. [ 4.865743@3] hub 2-0:1.0: USB hub found
  1184. [ 4.865764@3] hub 2-0:1.0: 1 port detected
  1185. [ 4.866210@3] hctosys: unable to open rtc device (rtc0)
  1186. [ 4.866530@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
  1187. [ 4.967179@1] dwc_otg: Core Release: 3.30a
  1188. [ 4.967183@1] dwc_otg: Setting default values for core params
  1189. [ 4.967192@1] dwc_otg: curmode: 0, host_only: 0
  1190. [ 4.979388@1] dwc_otg: Using Buffer DMA mode
  1191. [ 4.979391@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  1192. [ 4.979393@1] dwc_otg: Working on port type = SLAVE
  1193. [ 4.979397@1] dwc_otg: Dedicated Tx FIFOs mode
  1194. [ 4.981404@1] meson_cdev probe
  1195. [ 4.981414@1] thermal: read gpupp failed
  1196. [ 4.981531@1] meson_cdev index: 0
  1197. [ 4.981635@1] thermal: read gpupp failed
  1198. [ 4.981721@1] meson_cdev index: 1
  1199. [ 4.981725@1] cpucore_cooling_register, max_cpu_core_num:4
  1200. [ 4.981857@1] meson_cdev index: 2
  1201. [ 4.981860@1] thermal: read gpupp failed
  1202. [ 4.981894@1] meson_cdev index: 3
  1203. [ 4.981948@1] find tzd id: 0
  1204. [ 4.982050@1] find tzd id: 0
  1205. [ 4.982082@1] meson_cdev probe done
  1206. [ 4.982214@1] gxbb_pm: enter meson_pm_probe!
  1207. [ 4.982227@1] no vddio3v3_en pin
  1208. [ 4.982227@1] pm-meson aml_pm: Can't get switch_clk81
  1209. [ 4.982250@1] gxbb_pm: meson_pm_probe done
  1210. [ 4.982583@1] ALSA device list:
  1211. [ 4.982586@1] #0: ODROID-HDMI
  1212. [ 5.110610@1] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  1213. [ 5.256664@1] usb 1-1: New USB device found, idVendor=2109, idProduct=2817
  1214. [ 5.256668@1] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1215. [ 5.256670@1] usb 1-1: Product: USB2.0 Hub
  1216. [ 5.256672@1] usb 1-1: Manufacturer: VIA Labs, Inc.
  1217. [ 5.281605@1] hub 1-1:1.0: USB hub found
  1218. [ 5.281700@1] hub 1-1:1.0: 4 ports detected
  1219. [ 5.375081@0] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
  1220. [ 5.435277@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1221. [ 5.435279@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1222. [ 5.435285@2] meson-mmc: Data 1 aligned delay is 0 5.458531@0] meson_uart ff803000.s#1 p12"e8`}nd?!vcf;0h=4 v{ <4 eSf 0swf; !/c*H4hsd044!/c*H4hsd040 i!<d;g
  1223. !/c*H4hs`0,q!/c*H4hs`0d0
  1224. !/c*" iuj;e!/c*J4hch0@4hsdd@4hceo1qd?(ti,?-11e<0,3wx +3&b`Nw!`,d`B!`,d`B!p5,
  1225. !?,dh*on{u,!g0m`,`00Mwu.,dh"
  1226. ,dhn",|)y"ji6#?dkj)n2"83&-2%=h
  1227. !d2g!dd2h ,dh&,{gn,!$}dye-!tgfue%!`q!(1t8 !irt!t'nx-BQ@AePS<jG(9
  1228. <tzbm a8aH/7
  1229. !$eaek0"f8w+vf<tKQ`)u3x!Q@Ieu6{e#%$0`50rur5dQ$WdEv-=!te'|xvhcgt$!qf9ge( h1etmd`z:`dq|!$}dyd-!tyzevHf1k`c`ce▒|gddd!t)u:,a q
  1230. !tgx31xe!t qp!*;2rkj~3o93wupA)i*kw;,a.qu`;,}Mk`;k{k1ch)+\tt1GMa1mn
  1231. 1xm2fW
  1232. @m`r `z`ht
  1233. /qfT.`:Yc-|,p9ogNa+3`;igkuLk{k1%t
  1234. (kwiy)i*KJh9 `zJ/Nk{t;g}u#{y qw?4MJ
  1235. (;`▒`q)N{yq?uME
  1236. 1xc9q`])i2k4yLk{qfT)i2!d2euf!$eaek0"m8w+vf<tKak(q3xH
  1237. [aeG!`2ugW.`:qa,y
  1238. 1x'!aU7ed1+t$&43n1e▒vdpL<d( 0mdtAla3!& {y%qa,yL3t8ogNa
  1239. 1x'Kf`
  1240. (Ky, (KE!Nk;qz2vLk" {%~i; qzud " @eNe-{`FkD{
  1241. `z0i7)q2$ek`=\t8Kvqp"D{et
  1242. 1x qf@; `!$eaeh0"a8w+vf<tOAuJ6 iupu"a8C*:)gb"qzy~;3`!qGuJ6ed1+t$$42n!o89sK1AaGb3!& `zaa
  1243. 1xaDkp"hw
  1244. !w}
  1245. !w4p!d-k!|*Hl!dm)
  1246. !11to3u9 i3hvc(zxs8e
  1247. !|*7qD+!fg!bhc&"`4yh&!b~et!b`b5
  1248. !bt'f2 heu'f2!bt'f2 hejh&<d`"Bv1a:Kar1ao|Lsvda)3`;a!c;,a;qx:Btt1x:Ka48ed 9 `:{M#@er#a=x)D{|a
  1249. fa3t(tY",;qx:GM9euyw+)q2bky
  1250. 1xm2piES)a`z
  1251. {`p!v*"h!te"{y qDbad# o9cwA+3q2A;,a!v*
  1252. !pev##v;h;#`D{d/N+qzsa# v;=,p9Ki-{y qy'*\tt1mLk{e}d#{y q:Bv1Mb;,ay083qz;,a;p \t8iPaddLk{tF{#v;#t`i+Nk{'Kj
  1253. 1xc9u1/p:qq:#@etvQ8`Dk`l".p:uei- (Ku#:Bv'K$]!`2k`T3qzO ;,a;Tvu
  1254. !o2d`)(vuG&jf 1x'K!BT`l`g0`v
  1255. !rbD4!e40(iqg
  1256. 6u` #zj0(iqc<0jUu!r7!r711gaG5`g11gaG5`g11gaG5`g11gaG5`g11iq1ip5#0i`5"c}M00s h1 hrm8f`q
  1257. 1gaG=ag11gaG=ag11ifqt#1bmbn
  1258. 1o2d`%vdq1BT$`/
  1259. 1ifqt`0pbb 3Ij1i=`>4 1g6m`,` 6#1 p900p6rqw0`,"0xd.`1d0j90
  1260. [ 21.158034@0] meson_uar)p"f8030)p"seria)p"ttyS0)p"e xta)p"4M) 2)p"q )p"ph )p)p" )p" )p" )p" )p" )p" )p" )p" )p"1
  1261.  
  1262. (I am trying to type something:)
  1263.  
  1264.  
  1265.  
  1266. ku
  1267. )p"B[ 380.689673@0] meson_uart ff803000.[ 380.692901@0] meson_uart ff80300f`|0'[ 380.933950@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 240bc (9)ph )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p" )p"
  1268.  
  1269.  
  1270. (this is weird)
  1271.  
  1272. ku
  1273. )p"
  1274. p
  1275.  
  1276. ku
  1277. )p"
  1278. p
  1279.  
  1280.  
  1281.  
  1282. (I am not giving up and trying to change serial settings in putty:)
  1283. (I change it to 115200, 8 data bits, 0 stop bits, parity:none, flowcontrol:none)
  1284.  
  1285. test
  1286.  
  1287. reseodijpv$[ 512.663585@0] meson_uart ff803000^ 512.666739@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
  1288. [ 512.934138@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
  1289.  
  1290. Debian GNU/Linux 10 odroid-buster64 ttyS0
  1291.  
  1292. eth0: 192.168.0.122
  1293. odroid-buster64 login:
  1294. odroid-buster64 login:
  1295. odroid-buster64 login:
  1296.  
  1297. (115200, 8 data bits, 0 stop bits, parity:none, flowcontrol:none) works now?! - yes it does. Permanently.
  1298.  
  1299. No idea why something is changed in the middle of booting.........
  1300.  
  1301.  
  1302.  
  1303.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement