Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- WLE900VX iw wlp2s0 info, iw list
- pp@pp-desktop:~$ iw wlp2s0 info
- Interface wlp2s0
- ifindex 3
- wdev 0x1
- addr 04:f0:21:18:04:4a
- type managed
- wiphy 0
- channel 1 (2412 MHz), width: 40 MHz, center1: 2422 MHz
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$ iw list
- Wiphy phy0
- max # scan SSIDs: 16
- max scan IEs length: 195 bytes
- Retry short limit: 7
- Retry long limit: 4
- Coverage class: 0 (up to 0m)
- Device supports RSN-IBSS.
- Device supports AP-side u-APSD.
- Supported Ciphers:
- * WEP40 (00-0f-ac:1)
- * WEP104 (00-0f-ac:5)
- * TKIP (00-0f-ac:2)
- * CCMP (00-0f-ac:4)
- * CMAC (00-0f-ac:6)
- Available Antennas: TX 0x7 RX 0x7
- Configured Antennas: TX 0x7 RX 0x7
- Supported interface modes:
- * managed
- * AP
- * AP/VLAN
- * monitor
- * mesh point
- Band 1:
- Capabilities: 0x19ef
- RX LDPC
- HT20/HT40
- SM Power Save disabled
- RX HT20 SGI
- RX HT40 SGI
- TX STBC
- RX STBC 1-stream
- Max AMSDU length: 7935 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 8 usec (0x06)
- HT TX/RX MCS rate indexes supported: 0-23
- Bitrates (non-HT):
- * 1.0 Mbps
- * 2.0 Mbps (short preamble supported)
- * 5.5 Mbps (short preamble supported)
- * 11.0 Mbps (short preamble supported)
- * 6.0 Mbps
- * 9.0 Mbps
- * 12.0 Mbps
- * 18.0 Mbps
- * 24.0 Mbps
- * 36.0 Mbps
- * 48.0 Mbps
- * 54.0 Mbps
- Frequencies:
- * 2412 MHz [1] (30.0 dBm)
- * 2417 MHz [2] (30.0 dBm)
- * 2422 MHz [3] (30.0 dBm)
- * 2427 MHz [4] (30.0 dBm)
- * 2432 MHz [5] (30.0 dBm)
- * 2437 MHz [6] (30.0 dBm)
- * 2442 MHz [7] (30.0 dBm)
- * 2447 MHz [8] (30.0 dBm)
- * 2452 MHz [9] (30.0 dBm)
- * 2457 MHz [10] (30.0 dBm)
- * 2462 MHz [11] (30.0 dBm)
- * 2467 MHz [12] (disabled)
- * 2472 MHz [13] (disabled)
- * 2484 MHz [14] (disabled)
- Band 2:
- Capabilities: 0x19ef
- RX LDPC
- HT20/HT40
- SM Power Save disabled
- RX HT20 SGI
- RX HT40 SGI
- TX STBC
- RX STBC 1-stream
- Max AMSDU length: 7935 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 8 usec (0x06)
- HT TX/RX MCS rate indexes supported: 0-23
- VHT Capabilities (0x338001b2):
- Max MPDU length: 11454
- Supported Channel Width: neither 160 nor 80+80
- RX LDPC
- short GI (80 MHz)
- TX STBC
- RX antenna pattern consistency
- TX antenna pattern consistency
- VHT RX MCS set:
- 1 streams: MCS 0-9
- 2 streams: MCS 0-9
- 3 streams: MCS 0-9
- 4 streams: not supported
- 5 streams: not supported
- 6 streams: not supported
- 7 streams: not supported
- 8 streams: not supported
- VHT RX highest supported: 0 Mbps
- VHT TX MCS set:
- 1 streams: MCS 0-9
- 2 streams: MCS 0-9
- 3 streams: MCS 0-9
- 4 streams: not supported
- 5 streams: not supported
- 6 streams: not supported
- 7 streams: not supported
- 8 streams: not supported
- VHT TX highest supported: 0 Mbps
- Bitrates (non-HT):
- * 6.0 Mbps
- * 9.0 Mbps
- * 12.0 Mbps
- * 18.0 Mbps
- * 24.0 Mbps
- * 36.0 Mbps
- * 48.0 Mbps
- * 54.0 Mbps
- Frequencies:
- * 5180 MHz [36] (17.0 dBm)
- * 5200 MHz [40] (17.0 dBm)
- * 5220 MHz [44] (17.0 dBm)
- * 5240 MHz [48] (17.0 dBm)
- * 5260 MHz [52] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5280 MHz [56] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5300 MHz [60] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5320 MHz [64] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5500 MHz [100] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5520 MHz [104] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5540 MHz [108] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5560 MHz [112] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5580 MHz [116] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5600 MHz [120] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5620 MHz [124] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5640 MHz [128] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5660 MHz [132] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5680 MHz [136] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5700 MHz [140] (23.0 dBm) (no IR, radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5720 MHz [144] (23.0 dBm) (radar detection)
- DFS state: usable (for 38 sec)
- DFS CAC time: 60000 ms
- * 5745 MHz [149] (30.0 dBm)
- * 5765 MHz [153] (30.0 dBm)
- * 5785 MHz [157] (30.0 dBm)
- * 5805 MHz [161] (30.0 dBm)
- * 5825 MHz [165] (30.0 dBm)
- * 5845 MHz [169] (disabled)
- Supported commands:
- * new_interface
- * set_interface
- * new_key
- * start_ap
- * new_station
- * new_mpath
- * set_mesh_config
- * set_bss
- * authenticate
- * associate
- * deauthenticate
- * disassociate
- * join_ibss
- * join_mesh
- * remain_on_channel
- * set_tx_bitrate_mask
- * frame
- * frame_wait_cancel
- * set_wiphy_netns
- * set_channel
- * set_wds_peer
- * probe_client
- * set_noack_map
- * register_beacons
- * start_p2p_device
- * set_mcast_rate
- * connect
- * disconnect
- * channel_switch
- * Unknown command (104)
- * Unknown command (121)
- Supported TX frame types:
- * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- Supported RX frame types:
- * IBSS: 0x40 0xb0 0xc0 0xd0
- * managed: 0x40 0xd0
- * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- * mesh point: 0xb0 0xc0 0xd0
- * P2P-client: 0x40 0xd0
- * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- * P2P-device: 0x40 0xd0
- software interface modes (can always be added):
- * AP/VLAN
- * monitor
- valid interface combinations:
- * #{ AP, mesh point } <= 8, #{ managed } <= 1,
- total <= 8, #channels <= 1, STA/AP BI must match
- HT Capability overrides:
- * MCS: ff ff ff ff ff ff ff ff ff ff
- * maximum A-MSDU length
- * supported channel width
- * short GI for 40 MHz
- * max A-MPDU length exponent
- * min MPDU start spacing
- Device supports TX status socket option.
- Device supports HT-IBSS.
- Device supports SAE with AUTHENTICATE command
- Device supports scan flush.
- Device supports AP scan.
- Device supports per-vif TX power setting
- Driver supports full state transitions for AP/GO clients
- Driver supports a userspace MPM
- Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
- Device supports static SMPS
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
- pp@pp-desktop:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement