Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 3.3.8 (jenkins@jenkins) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Fri Oct 10 07:51:33 CEST 2014
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
- [ 0.000000] SoC: Atheros AR9330 rev 1
- [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00004000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] Early memory PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00004000
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] free_area_init_node: node 0, pgdat 803836d0, node_mem_map 81000000
- [ 0.000000] Normal zone: 128 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: board=Yun console=ttyATH0,250000 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 60936k/65536k available (2565k kernel code, 4600k reserved, 650k data, 180k init, 0k highmem)
- [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:51
- [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
- [ 0.080000] pid_max: default: 32768 minimum: 301
- [ 0.080000] Mount-cache hash table entries: 512
- [ 0.080000] NET: Registered protocol family 16
- [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
- [ 0.090000] MIPS: machine is Arduino Yun
- [ 0.530000] Setting DogStick2 GPIO
- [ 0.550000] bio: create slab <bio-0> at 0
- [ 0.550000] SCSI subsystem initialized
- [ 0.560000] usbcore: registered new interface driver usbfs
- [ 0.560000] usbcore: registered new interface driver hub
- [ 0.560000] usbcore: registered new device driver usb
- [ 0.570000] Switching to clocksource MIPS
- [ 0.570000] NET: Registered protocol family 2
- [ 0.570000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.580000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.580000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.580000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.580000] TCP reno registered
- [ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.590000] NET: Registered protocol family 1
- [ 0.610000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.610000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.620000] msgmni has been set to 119
- [ 0.620000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 0.620000] io scheduler noop registered
- [ 0.630000] io scheduler deadline registered (default)
- [ 0.630000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.640000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
- [ 0.640000] console [ttyATH0] enabled, bootconsole disabled
- [ 0.650000] m25p80 spi0.0: found w25q128, expected m25p80
- [ 0.650000] m25p80 spi0.0: w25q128 (16384 Kbytes)
- [ 0.650000] 7 cmdlinepart partitions found on MTD device spi0.0
- [ 0.660000] Creating 7 MTD partitions on "spi0.0":
- [ 0.660000] 0x000000000000-0x000000040000 : "u-boot"
- [ 0.660000] 0x000000040000-0x000000050000 : "u-boot-env"
- [ 0.670000] 0x000000050000-0x000000ea0000 : "rootfs"
- [ 0.670000] mtd: partition "rootfs" set to be root filesystem
- [ 0.670000] mtd: partition "rootfs_data" created automatically, ofs=7B0000, len=6F0000
- [ 0.680000] 0x0000007b0000-0x000000ea0000 : "rootfs_data"
- [ 0.680000] 0x000000ea0000-0x000000fe0000 : "kernel"
- [ 0.680000] 0x000000fe0000-0x000000ff0000 : "nvram"
- [ 0.690000] 0x000000ff0000-0x000001000000 : "art"
- [ 0.690000] 0x000000050000-0x000000fe0000 : "firmware"
- [ 0.710000] ag71xx_mdio: probed
- [ 0.720000] eth0: Atheros AG71xx at 0xba000000, irq 5
- [ 1.270000] eth0: Found an AR7240/AR9330 built-in switch
- [ 2.300000] eth1: Atheros AG71xx at 0xb9000000, irq 4
- [ 2.850000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
- [ 2.850000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.850000] ehci-platform ehci-platform: Generic Platform EHCI Controller
- [ 2.860000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
- [ 2.890000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
- [ 2.910000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
- [ 2.910000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.910000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.910000] usb usb1: Product: Generic Platform EHCI Controller
- [ 2.920000] usb usb1: Manufacturer: Linux 3.3.8 ehci_hcd
- [ 2.920000] usb usb1: SerialNumber: ehci-platform
- [ 2.920000] hub 1-0:1.0: USB hub found
- [ 2.920000] hub 1-0:1.0: 1 port detected
- [ 2.930000] Initializing USB Mass Storage driver...
- [ 2.930000] usbcore: registered new interface driver usb-storage
- [ 2.930000] USB Mass Storage support registered.
- [ 2.930000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
- [ 2.940000] sdhci: Secure Digital Host Controller Interface driver
- [ 2.940000] sdhci: Copyright(c) Pierre Ossman
- [ 2.940000] usbcore: registered new interface driver ushc
- [ 2.940000] TCP cubic registered
- [ 2.950000] NET: Registered protocol family 17
- [ 2.950000] Bridge firewalling registered
- [ 2.950000] 8021q: 802.1Q VLAN Support v1.8
- [ 2.960000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 2.960000] Freeing unused kernel memory: 180k freed
- [ 3.250000] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 3.460000] usb 1-1: New USB device found, idVendor=058f, idProduct=6254
- [ 3.460000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.470000] usb 1-1: Product: USB2.0Hub
- [ 3.550000] hub 1-1:1.0: USB hub found
- [ 3.550000] hub 1-1:1.0: 4 ports detected
- [ 3.830000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
- [ 3.960000] usb 1-1.4: New USB device found, idVendor=058f, idProduct=6366
- [ 3.960000] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.960000] usb 1-1.4: Product: Mass Storage Device
- [ 3.970000] usb 1-1.4: Manufacturer: Generic
- [ 3.970000] usb 1-1.4: SerialNumber: 058F0O1111B1
- [ 3.980000] scsi0 : usb-storage 1-1.4:1.0
- [ 5.030000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
- [ 5.060000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
- [ 6.260000] Registered led device: ds:green:usb
- [ 6.260000] Registered led device: ds:green:wlan
- [ 8.890000] JFFS2 notice: (527) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 11 of xref (0 dead, 0 orphan) found.
- [ 10.070000] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 37.910000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
- [ 37.910000] Backport generated by backports.git backports-20140320-37-g5c33da0
- [ 38.090000] cfg80211: Calling CRDA to update world regulatory domain
- [ 38.090000] cfg80211: World regulatory domain updated:
- [ 38.090000] cfg80211: DFS Master region: unset
- [ 38.100000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 38.100000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 38.100000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 38.110000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 38.110000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 38.110000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 38.120000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 39.070000] ath: EEPROM regdomain: 0x0
- [ 39.070000] ath: EEPROM indicates default country code should be used
- [ 39.070000] ath: doing EEPROM country->regdmn map search
- [ 39.070000] ath: country maps to regdmn code: 0x3a
- [ 39.070000] ath: Country alpha2 being used: US
- [ 39.070000] ath: Regpair used: 0x3a
- [ 39.080000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 39.090000] Registered led device: ath9k-phy0
- [ 39.090000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
- [ 39.090000] cfg80211: Calling CRDA for country: US
- [ 39.090000] cfg80211: Regulatory domain changed to country: US
- [ 39.100000] cfg80211: DFS Master region: FCC
- [ 39.100000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 39.100000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
- [ 39.110000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
- [ 39.110000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
- [ 39.110000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
- [ 39.120000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
- [ 39.660000] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [ 39.710000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
- [ 39.730000] loop: module loaded
- [ 39.870000] PPP generic driver version 2.4.2
- [ 39.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 40.040000] NET: Registered protocol family 24
- [ 40.080000] nf_conntrack version 0.5.0 (954 buckets, 3816 max)
- [ 40.740000] i2c /dev entries driver
- [ 40.790000] Linux video capture interface: v2.00
- [ 40.980000] fuse init (API version 7.18)
- [ 54.250000] wlan0: authenticate with 5c:96:9d:66:4a:0f
- [ 54.260000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 1/3)
- [ 54.470000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 2/3)
- [ 54.680000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 3/3)
- [ 54.890000] wlan0: authentication with 5c:96:9d:66:4a:0f timed out
- [ 55.140000] wlan0: authenticate with 00:25:3c:54:c7:41
- [ 55.140000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 1/3)
- [ 55.360000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 2/3)
- [ 55.570000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 3/3)
- [ 55.810000] wlan0: authentication with 00:25:3c:54:c7:41 timed out
- [ 56.650000] wlan0: authenticate with 5c:96:9d:66:4a:0f
- [ 56.650000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 1/3)
- [ 56.870000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 2/3)
- [ 57.080000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 3/3)
- [ 57.290000] wlan0: authentication with 5c:96:9d:66:4a:0f timed out
- [ 58.390000] wlan0: authenticate with 00:25:3c:54:c7:41
- [ 58.390000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 1/3)
- [ 58.610000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 2/3)
- [ 58.820000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 3/3)
- [ 59.030000] wlan0: authentication with 00:25:3c:54:c7:41 timed out
- [ 60.730000] wlan0: authenticate with 5c:96:9d:66:4a:0f
- [ 60.740000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 1/3)
- [ 60.950000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 2/3)
- [ 61.160000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 3/3)
- [ 61.390000] wlan0: authentication with 5c:96:9d:66:4a:0f timed out
- [ 71.490000] wlan0: authenticate with 00:25:3c:54:c7:41
- [ 71.500000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 1/3)
- [ 71.710000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 2/3)
- [ 71.920000] wlan0: direct probe to 00:25:3c:54:c7:41 (try 3/3)
- [ 72.130000] wlan0: authentication with 00:25:3c:54:c7:41 timed out
- [ 91.270000] wlan0: authenticate with 5c:96:9d:66:4a:0f
- [ 91.280000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 1/3)
- [ 91.490000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 2/3)
- [ 91.700000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 3/3)
- [ 91.910000] wlan0: authentication with 5c:96:9d:66:4a:0f timed out
- [ 112.140000] wlan0: authenticate with 5c:96:9d:66:4a:0f
- [ 112.150000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 1/3)
- [ 112.360000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 2/3)
- [ 112.570000] wlan0: direct probe to 5c:96:9d:66:4a:0f (try 3/3)
- [ 112.780000] wlan0: authentication with 5c:96:9d:66:4a:0f timed out
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement