Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OpenFlow 1.0
- .000 0001 = Version: 1.0 (0x01)
- Type: OFPT_FEATURES_REPLY (6)
- Length: 416
- Transaction ID: 568257767
- Datapath unique ID: 0x1200ffeeddccbbaa
- MAC addr: 12:00:ff:ee:dd:cc (12:00:ff:ee:dd:cc)
- Implementers part: 0xbbaa
- n_buffers: 256
- n_tables: 255
- Pad: 000000
- capabilities: 0x00000004
- .... .... .... .... .... .... .... ...0 = Flow statistics: False
- .... .... .... .... .... .... .... ..0. = Table statistics: False
- .... .... .... .... .... .... .... .1.. = Port statistics: True
- .... .... .... .... .... .... .... 0... = Group statistics: False
- .... .... .... .... .... .... ..0. .... = Can reassemble IP fragments: False
- .... .... .... .... .... .... .0.. .... = Queue statistics: False
- .... .... .... .... .... ...0 .... .... = Switch will block looping ports: False
- actions: 0x00000030
- .... .... .... .... .... .... .... ...0 = Output to switch port: False
- .... .... .... .... .... .... .... ..0. = Set the 802.1q VLAN id: False
- .... .... .... .... .... .... .... .0.. = Set the 802.1q priority: False
- .... .... .... .... .... .... .... 0... = Strip the 802.1q header: False
- .... .... .... .... .... .... ...1 .... = Ethernet source address: True
- .... .... .... .... .... .... ..1. .... = Ethernet destination address: True
- .... .... .... .... .... .... .0.. .... = IP source address: False
- .... .... .... .... .... .... 0... .... = IP destination address: False
- .... .... .... .... .... ...0 .... .... = IP ToS (DSCP field, 6 bits): False
- .... .... .... .... .... ..0. .... .... = TCP/UDP source port: False
- .... .... .... .... .... .0.. .... .... = TCP/UDP destination port: False
- .... .... .... .... .... 0... .... .... = Output to queue: False
- Port data 1
- Port number: 1
- HW Address: 12:34:56:78:9a:11 (12:34:56:78:9a:11)
- Port Name: port1
- Config flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = Port is administratively down: False
- .... .... .... .... .... .... .... ..0. = Disable 802.1D spanning tree on port: False
- .... .... .... .... .... .... .... .0.. = Drop all packets except 802.1D spanning tree packets: False
- .... .... .... .... .... .... .... 0... = Drop received 802.1D STP packets: False
- .... .... .... .... .... .... ...0 .... = Do not include this port when flooding: False
- .... .... .... .... .... .... ..0. .... = Drop packets forwarded to port: False
- .... .... .... .... .... .... .0.. .... = Do not send packet-in msgs for port: False
- State flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = No physical link present: False
- Current features: 0x00000140
- .... .... .... .... .... .... .... ...0 = 10 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... ..0. = 10 Mb full-duplex rate support: False
- .... .... .... .... .... .... .... .0.. = 100 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... 0... = 100 Mb full-duplex rate support: False
- .... .... .... .... .... .... ...0 .... = 1 Gb half-duplex rate support: False
- .... .... .... .... .... .... ..0. .... = 1 Gb full-duplex rate support: False
- .... .... .... .... .... .... .1.. .... = 10 Gb full-duplex rate support: True
- .... .... .... .... .... .... 0... .... = Copper medium: False
- .... .... .... .... .... ...1 .... .... = Fiber medium: True
- .... .... .... .... .... ..0. .... .... = Auto-negotiation: False
- .... .... .... .... .... .0.. .... .... = Pause: False
- .... .... .... .... .... 0... .... .... = Asymmetric pause: False
- Advertised features: 0x00000000
- Features supported: 0x00000140
- Features advertised by peer: 0x00000140
- Port data 2
- Port number: 2
- HW Address: 12:34:56:78:9a:22 (12:34:56:78:9a:22)
- Port Name: port2
- Config flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = Port is administratively down: False
- .... .... .... .... .... .... .... ..0. = Disable 802.1D spanning tree on port: False
- .... .... .... .... .... .... .... .0.. = Drop all packets except 802.1D spanning tree packets: False
- .... .... .... .... .... .... .... 0... = Drop received 802.1D STP packets: False
- .... .... .... .... .... .... ...0 .... = Do not include this port when flooding: False
- .... .... .... .... .... .... ..0. .... = Drop packets forwarded to port: False
- .... .... .... .... .... .... .0.. .... = Do not send packet-in msgs for port: False
- State flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = No physical link present: False
- Current features: 0x00000140
- .... .... .... .... .... .... .... ...0 = 10 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... ..0. = 10 Mb full-duplex rate support: False
- .... .... .... .... .... .... .... .0.. = 100 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... 0... = 100 Mb full-duplex rate support: False
- .... .... .... .... .... .... ...0 .... = 1 Gb half-duplex rate support: False
- .... .... .... .... .... .... ..0. .... = 1 Gb full-duplex rate support: False
- .... .... .... .... .... .... .1.. .... = 10 Gb full-duplex rate support: True
- .... .... .... .... .... .... 0... .... = Copper medium: False
- .... .... .... .... .... ...1 .... .... = Fiber medium: True
- .... .... .... .... .... ..0. .... .... = Auto-negotiation: False
- .... .... .... .... .... .0.. .... .... = Pause: False
- .... .... .... .... .... 0... .... .... = Asymmetric pause: False
- Advertised features: 0x00000000
- Features supported: 0x00000140
- Features advertised by peer: 0x00000140
- Port data 3
- Port number: 3
- HW Address: 12:34:56:78:9a:33 (12:34:56:78:9a:33)
- Port Name: port3
- Config flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = Port is administratively down: False
- .... .... .... .... .... .... .... ..0. = Disable 802.1D spanning tree on port: False
- .... .... .... .... .... .... .... .0.. = Drop all packets except 802.1D spanning tree packets: False
- .... .... .... .... .... .... .... 0... = Drop received 802.1D STP packets: False
- .... .... .... .... .... .... ...0 .... = Do not include this port when flooding: False
- .... .... .... .... .... .... ..0. .... = Drop packets forwarded to port: False
- .... .... .... .... .... .... .0.. .... = Do not send packet-in msgs for port: False
- State flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = No physical link present: False
- Current features: 0x00000140
- .... .... .... .... .... .... .... ...0 = 10 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... ..0. = 10 Mb full-duplex rate support: False
- .... .... .... .... .... .... .... .0.. = 100 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... 0... = 100 Mb full-duplex rate support: False
- .... .... .... .... .... .... ...0 .... = 1 Gb half-duplex rate support: False
- .... .... .... .... .... .... ..0. .... = 1 Gb full-duplex rate support: False
- .... .... .... .... .... .... .1.. .... = 10 Gb full-duplex rate support: True
- .... .... .... .... .... .... 0... .... = Copper medium: False
- .... .... .... .... .... ...1 .... .... = Fiber medium: True
- .... .... .... .... .... ..0. .... .... = Auto-negotiation: False
- .... .... .... .... .... .0.. .... .... = Pause: False
- .... .... .... .... .... 0... .... .... = Asymmetric pause: False
- Advertised features: 0x00000000
- Features supported: 0x00000140
- Features advertised by peer: 0x00000140
- Port data 4
- Port number: 4
- HW Address: 12:34:56:78:9a:44 (12:34:56:78:9a:44)
- Port Name: port4
- Config flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = Port is administratively down: False
- .... .... .... .... .... .... .... ..0. = Disable 802.1D spanning tree on port: False
- .... .... .... .... .... .... .... .0.. = Drop all packets except 802.1D spanning tree packets: False
- .... .... .... .... .... .... .... 0... = Drop received 802.1D STP packets: False
- .... .... .... .... .... .... ...0 .... = Do not include this port when flooding: False
- .... .... .... .... .... .... ..0. .... = Drop packets forwarded to port: False
- .... .... .... .... .... .... .0.. .... = Do not send packet-in msgs for port: False
- State flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = No physical link present: False
- Current features: 0x00000140
- .... .... .... .... .... .... .... ...0 = 10 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... ..0. = 10 Mb full-duplex rate support: False
- .... .... .... .... .... .... .... .0.. = 100 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... 0... = 100 Mb full-duplex rate support: False
- .... .... .... .... .... .... ...0 .... = 1 Gb half-duplex rate support: False
- .... .... .... .... .... .... ..0. .... = 1 Gb full-duplex rate support: False
- .... .... .... .... .... .... .1.. .... = 10 Gb full-duplex rate support: True
- .... .... .... .... .... .... 0... .... = Copper medium: False
- .... .... .... .... .... ...1 .... .... = Fiber medium: True
- .... .... .... .... .... ..0. .... .... = Auto-negotiation: False
- .... .... .... .... .... .0.. .... .... = Pause: False
- .... .... .... .... .... 0... .... .... = Asymmetric pause: False
- Advertised features: 0x00000000
- Features supported: 0x00000140
- Features advertised by peer: 0x00000140
- Port data 5
- Port number: 5
- HW Address: 12:34:56:78:9a:55 (12:34:56:78:9a:55)
- Port Name: port5
- Config flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = Port is administratively down: False
- .... .... .... .... .... .... .... ..0. = Disable 802.1D spanning tree on port: False
- .... .... .... .... .... .... .... .0.. = Drop all packets except 802.1D spanning tree packets: False
- .... .... .... .... .... .... .... 0... = Drop received 802.1D STP packets: False
- .... .... .... .... .... .... ...0 .... = Do not include this port when flooding: False
- .... .... .... .... .... .... ..0. .... = Drop packets forwarded to port: False
- .... .... .... .... .... .... .0.. .... = Do not send packet-in msgs for port: False
- State flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = No physical link present: False
- Current features: 0x00000140
- .... .... .... .... .... .... .... ...0 = 10 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... ..0. = 10 Mb full-duplex rate support: False
- .... .... .... .... .... .... .... .0.. = 100 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... 0... = 100 Mb full-duplex rate support: False
- .... .... .... .... .... .... ...0 .... = 1 Gb half-duplex rate support: False
- .... .... .... .... .... .... ..0. .... = 1 Gb full-duplex rate support: False
- .... .... .... .... .... .... .1.. .... = 10 Gb full-duplex rate support: True
- .... .... .... .... .... .... 0... .... = Copper medium: False
- .... .... .... .... .... ...1 .... .... = Fiber medium: True
- .... .... .... .... .... ..0. .... .... = Auto-negotiation: False
- .... .... .... .... .... .0.. .... .... = Pause: False
- .... .... .... .... .... 0... .... .... = Asymmetric pause: False
- Advertised features: 0x00000000
- Features supported: 0x00000140
- Features advertised by peer: 0x00000140
- Port data 6
- Port number: 6
- HW Address: 12:34:56:78:9a:66 (12:34:56:78:9a:66)
- Port Name: port6
- Config flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = Port is administratively down: False
- .... .... .... .... .... .... .... ..0. = Disable 802.1D spanning tree on port: False
- .... .... .... .... .... .... .... .0.. = Drop all packets except 802.1D spanning tree packets: False
- .... .... .... .... .... .... .... 0... = Drop received 802.1D STP packets: False
- .... .... .... .... .... .... ...0 .... = Do not include this port when flooding: False
- .... .... .... .... .... .... ..0. .... = Drop packets forwarded to port: False
- .... .... .... .... .... .... .0.. .... = Do not send packet-in msgs for port: False
- State flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = No physical link present: False
- Current features: 0x00000140
- .... .... .... .... .... .... .... ...0 = 10 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... ..0. = 10 Mb full-duplex rate support: False
- .... .... .... .... .... .... .... .0.. = 100 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... 0... = 100 Mb full-duplex rate support: False
- .... .... .... .... .... .... ...0 .... = 1 Gb half-duplex rate support: False
- .... .... .... .... .... .... ..0. .... = 1 Gb full-duplex rate support: False
- .... .... .... .... .... .... .1.. .... = 10 Gb full-duplex rate support: True
- .... .... .... .... .... .... 0... .... = Copper medium: False
- .... .... .... .... .... ...1 .... .... = Fiber medium: True
- .... .... .... .... .... ..0. .... .... = Auto-negotiation: False
- .... .... .... .... .... .0.. .... .... = Pause: False
- .... .... .... .... .... 0... .... .... = Asymmetric pause: False
- Advertised features: 0x00000000
- Features supported: 0x00000140
- Features advertised by peer: 0x00000140
- Port data 7
- Port number: 7
- HW Address: 12:34:56:78:9a:77 (12:34:56:78:9a:77)
- Port Name: port7
- Config flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = Port is administratively down: False
- .... .... .... .... .... .... .... ..0. = Disable 802.1D spanning tree on port: False
- .... .... .... .... .... .... .... .0.. = Drop all packets except 802.1D spanning tree packets: False
- .... .... .... .... .... .... .... 0... = Drop received 802.1D STP packets: False
- .... .... .... .... .... .... ...0 .... = Do not include this port when flooding: False
- .... .... .... .... .... .... ..0. .... = Drop packets forwarded to port: False
- .... .... .... .... .... .... .0.. .... = Do not send packet-in msgs for port: False
- State flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = No physical link present: False
- Current features: 0x00000140
- .... .... .... .... .... .... .... ...0 = 10 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... ..0. = 10 Mb full-duplex rate support: False
- .... .... .... .... .... .... .... .0.. = 100 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... 0... = 100 Mb full-duplex rate support: False
- .... .... .... .... .... .... ...0 .... = 1 Gb half-duplex rate support: False
- .... .... .... .... .... .... ..0. .... = 1 Gb full-duplex rate support: False
- .... .... .... .... .... .... .1.. .... = 10 Gb full-duplex rate support: True
- .... .... .... .... .... .... 0... .... = Copper medium: False
- .... .... .... .... .... ...1 .... .... = Fiber medium: True
- .... .... .... .... .... ..0. .... .... = Auto-negotiation: False
- .... .... .... .... .... .0.. .... .... = Pause: False
- .... .... .... .... .... 0... .... .... = Asymmetric pause: False
- Advertised features: 0x00000000
- Features supported: 0x00000140
- Features advertised by peer: 0x00000140
- Port data 8
- Port number: 8
- HW Address: 12:34:56:78:9a:88 (12:34:56:78:9a:88)
- Port Name: port8
- Config flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = Port is administratively down: False
- .... .... .... .... .... .... .... ..0. = Disable 802.1D spanning tree on port: False
- .... .... .... .... .... .... .... .0.. = Drop all packets except 802.1D spanning tree packets: False
- .... .... .... .... .... .... .... 0... = Drop received 802.1D STP packets: False
- .... .... .... .... .... .... ...0 .... = Do not include this port when flooding: False
- .... .... .... .... .... .... ..0. .... = Drop packets forwarded to port: False
- .... .... .... .... .... .... .0.. .... = Do not send packet-in msgs for port: False
- State flags: 0x00000000
- .... .... .... .... .... .... .... ...0 = No physical link present: False
- Current features: 0x00000140
- .... .... .... .... .... .... .... ...0 = 10 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... ..0. = 10 Mb full-duplex rate support: False
- .... .... .... .... .... .... .... .0.. = 100 Mb half-duplex rate support: False
- .... .... .... .... .... .... .... 0... = 100 Mb full-duplex rate support: False
- .... .... .... .... .... .... ...0 .... = 1 Gb half-duplex rate support: False
- .... .... .... .... .... .... ..0. .... = 1 Gb full-duplex rate support: False
- .... .... .... .... .... .... .1.. .... = 10 Gb full-duplex rate support: True
- .... .... .... .... .... .... 0... .... = Copper medium: False
- .... .... .... .... .... ...1 .... .... = Fiber medium: True
- .... .... .... .... .... ..0. .... .... = Auto-negotiation: False
- .... .... .... .... .... .0.. .... .... = Pause: False
- .... .... .... .... .... 0... .... .... = Asymmetric pause: False
- Advertised features: 0x00000000
- Features supported: 0x00000140
- Features advertised by peer: 0x00000140
Add Comment
Please, Sign In to add comment