Guest User

Untitled

a guest
Mar 8th, 2017
87
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 4.4.52-ti-r91 (root@a1-imx6q-wandboard-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Fri Mar 3 22:39:33 UTC 2017
  6. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine model: TI AM335x BeagleBone Black Wireless
  9. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000
  10. [ 0.000000] Memory policy: Data cache writeback
  11. [ 0.000000] On node 0 totalpages: 130560
  12. [ 0.000000] free_area_init_node: node 0, pgdat c105f300, node_mem_map df961000
  13. [ 0.000000] Normal zone: 1152 pages used for memmap
  14. [ 0.000000] Normal zone: 0 pages reserved
  15. [ 0.000000] Normal zone: 130560 pages, LIFO batch:31
  16. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  17. [ 0.000000] AM335X ES2.1 (sgx neon )
  18. [ 0.000000] PERCPU: Embedded 13 pages/cpu @df91e000 s24320 r8192 d20736 u53248
  19. [ 0.000000] pcpu-alloc: s24320 r8192 d20736 u53248 alloc=13*4096
  20. [ 0.000000] pcpu-alloc: [0] 0
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408
  22. [ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable
  23. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  26. [ 0.000000] Memory: 444676K/522240K available (11374K kernel code, 917K rwdata, 3800K rodata, 744K init, 907K bss, 28412K reserved, 49152K cma-reserved, 0K highmem)
  27. [ 0.000000] Virtual kernel memory layout:
  28. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  30. vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
  31. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  32. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  33. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  34. .text : 0xc0008000 - 0xc0ed9adc (15175 kB)
  35. .init : 0xc0eda000 - 0xc0f94000 ( 744 kB)
  36. .data : 0xc0f94000 - 0xc10795d0 ( 918 kB)
  37. .bss : 0xc107c000 - 0xc115efa8 ( 908 kB)
  38. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  39. [ 0.000000] Hierarchical RCU implementation.
  40. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  41. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  42. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
  43. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  44. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  45. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  46. [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  47. [ 0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  48. [ 0.000049] OMAP clocksource: timer1 at 24000000 Hz
  49. [ 0.001076] clocksource_probe: no matching clocksources found
  50. [ 0.001288] Console: colour dummy device 80x30
  51. [ 0.001454] console [tty0] enabled
  52. [ 0.001477] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
  53. [ 0.001484] This ensures that you still see kernel messages. Please
  54. [ 0.001490] update your kernel commandline.
  55. [ 0.001511] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
  56. [ 0.046773] pid_max: default: 32768 minimum: 301
  57. [ 0.046926] Security Framework initialized
  58. [ 0.046942] Yama: becoming mindful.
  59. [ 0.046978] AppArmor: AppArmor disabled by boot time parameter
  60. [ 0.047163] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  61. [ 0.047175] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  62. [ 0.048028] Initializing cgroup subsys io
  63. [ 0.048060] Initializing cgroup subsys memory
  64. [ 0.048106] Initializing cgroup subsys devices
  65. [ 0.048124] Initializing cgroup subsys freezer
  66. [ 0.048140] Initializing cgroup subsys net_cls
  67. [ 0.048154] Initializing cgroup subsys perf_event
  68. [ 0.048169] Initializing cgroup subsys net_prio
  69. [ 0.048192] Initializing cgroup subsys pids
  70. [ 0.048252] CPU: Testing write buffer coherency: ok
  71. [ 0.048312] ftrace: allocating 34648 entries in 102 pages
  72. [ 0.145766] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  73. [ 0.145890] Setting up static identity map for 0x80008280 - 0x800082e0
  74. [ 0.150021] Brought up 1 CPUs
  75. [ 0.150046] SMP: Total of 1 processors activated (995.32 BogoMIPS).
  76. [ 0.150055] CPU: All CPU(s) started in SVC mode.
  77. [ 0.151775] devtmpfs: initialized
  78. [ 0.170474] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  79. [ 0.191143] omap_hwmod: debugss: _wait_target_disable failed
  80. [ 0.245031] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  81. [ 0.245068] futex hash table entries: 256 (order: 2, 16384 bytes)
  82. [ 0.249111] xor: measuring software checksum speed
  83. [ 0.286773] arm4regs : 1219.000 MB/sec
  84. [ 0.326768] 8regs : 1091.000 MB/sec
  85. [ 0.366767] 32regs : 1089.000 MB/sec
  86. [ 0.406766] neon : 1739.000 MB/sec
  87. [ 0.406774] xor: using function: neon (1739.000 MB/sec)
  88. [ 0.406889] pinctrl core: initialized pinctrl subsystem
  89. [ 0.408944] NET: Registered protocol family 16
  90. [ 0.412643] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  91. [ 0.413896] cpuidle: using governor ladder
  92. [ 0.413919] cpuidle: using governor menu
  93. [ 0.419614] OMAP GPIO hardware version 0.1
  94. [ 0.422159] GPIO line 106 (LS_BUF_EN) hogged as output/high
  95. [ 0.432354] No ATAGs?
  96. [ 0.432388] hw-breakpoint: debug architecture 0x4 unsupported.
  97. [ 0.432923] omap4_sram_init:Unable to allocate sram needed to handle errata I688
  98. [ 0.432938] omap4_sram_init:Unable to get sram pool needed to handle errata I688
  99. [ 0.511034] raid6: int32x1 gen() 230 MB/s
  100. [ 0.578944] raid6: int32x1 xor() 176 MB/s
  101. [ 0.646949] raid6: int32x2 gen() 304 MB/s
  102. [ 0.714770] raid6: int32x2 xor() 198 MB/s
  103. [ 0.782892] raid6: int32x4 gen() 284 MB/s
  104. [ 0.850869] raid6: int32x4 xor() 199 MB/s
  105. [ 0.918874] raid6: int32x8 gen() 282 MB/s
  106. [ 0.986887] raid6: int32x8 xor() 186 MB/s
  107. [ 1.054776] raid6: neonx1 gen() 1464 MB/s
  108. [ 1.122769] raid6: neonx1 xor() 846 MB/s
  109. [ 1.190791] raid6: neonx2 gen() 1886 MB/s
  110. [ 1.258770] raid6: neonx2 xor() 1172 MB/s
  111. [ 1.326766] raid6: neonx4 gen() 1927 MB/s
  112. [ 1.394769] raid6: neonx4 xor() 1204 MB/s
  113. [ 1.462817] raid6: neonx8 gen() 1188 MB/s
  114. [ 1.530771] raid6: neonx8 xor() 844 MB/s
  115. [ 1.530779] raid6: using algorithm neonx4 gen() 1927 MB/s
  116. [ 1.530786] raid6: .... xor() 1204 MB/s, rmw enabled
  117. [ 1.530793] raid6: using intx1 recovery algorithm
  118. [ 1.540180] edma 49000000.edma: TI EDMA DMA engine driver
  119. [ 1.545293] SCSI subsystem initialized
  120. [ 1.545734] libata version 3.00 loaded.
  121. [ 1.546088] usbcore: registered new interface driver usbfs
  122. [ 1.546161] usbcore: registered new interface driver hub
  123. [ 1.546270] usbcore: registered new device driver usb
  124. [ 1.546988] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
  125. [ 1.547042] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
  126. [ 1.547178] media: Linux media interface: v0.10
  127. [ 1.547254] Linux video capture interface: v2.00
  128. [ 1.547360] pps_core: LinuxPPS API ver. 1 registered
  129. [ 1.547368] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  130. [ 1.547395] PTP clock support registered
  131. [ 1.548309] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
  132. [ 1.549730] NetLabel: Initializing
  133. [ 1.549746] NetLabel: domain hash size = 128
  134. [ 1.549751] NetLabel: protocols = UNLABELED CIPSOv4
  135. [ 1.549822] NetLabel: unlabeled traffic allowed by default
  136. [ 1.550253] clocksource: Switched to clocksource timer1
  137. [ 1.661343] NET: Registered protocol family 2
  138. [ 1.662205] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  139. [ 1.662355] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  140. [ 1.662416] TCP: Hash tables configured (established 4096 bind 4096)
  141. [ 1.662500] UDP hash table entries: 256 (order: 1, 8192 bytes)
  142. [ 1.662522] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  143. [ 1.662863] NET: Registered protocol family 1
  144. [ 1.663469] RPC: Registered named UNIX socket transport module.
  145. [ 1.663486] RPC: Registered udp transport module.
  146. [ 1.663492] RPC: Registered tcp transport module.
  147. [ 1.663498] RPC: Registered tcp NFSv4.1 backchannel transport module.
  148. [ 1.664164] Unpacking initramfs...
  149. [ 2.054678] Freeing initrd memory: 5192K (c8080000 - c8592000)
  150. [ 2.055463] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
  151. [ 2.058443] audit: initializing netlink subsys (disabled)
  152. [ 2.058548] audit: type=2000 audit(1.992:1): initialized
  153. [ 2.068908] zbud: loaded
  154. [ 2.069611] VFS: Disk quotas dquot_6.6.0
  155. [ 2.069871] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  156. [ 2.072676] NFS: Registering the id_resolver key type
  157. [ 2.072755] Key type id_resolver registered
  158. [ 2.072764] Key type id_legacy registered
  159. [ 2.072797] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  160. [ 2.073202] fuse init (API version 7.23)
  161. [ 2.073843] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  162. [ 2.082563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  163. [ 2.082841] io scheduler noop registered
  164. [ 2.082859] io scheduler deadline registered
  165. [ 2.082929] io scheduler cfq registered (default)
  166. [ 2.084359] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  167. [ 2.086123] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
  168. [ 2.087812] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  169. [ 2.091160] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
  170. [ 2.104561] console [ttyS0] enabled
  171. [ 2.105590] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 159, base_baud = 3000000) is a 8250
  172. [ 2.107301] [drm] Initialized drm 1.1.0 20060810
  173. [ 2.112522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  174. [ 2.112572] ehci-platform: EHCI generic platform driver
  175. [ 2.112759] ehci-omap: OMAP-EHCI Host Controller driver
  176. [ 2.113180] usbcore: registered new interface driver usb-storage
  177. [ 2.115533] 47401300.usb-phy supply vcc not found, using dummy regulator
  178. [ 2.118042] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  179. [ 2.118062] musb-hdrc: MHDRC RTL version 2.0
  180. [ 2.118071] musb-hdrc: setup fifo_mode 4
  181. [ 2.118090] musb-hdrc: 28/31 max ep, 16384/16384 memory
  182. [ 2.119977] 47401b00.usb-phy supply vcc not found, using dummy regulator
  183. [ 2.122371] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  184. [ 2.122390] musb-hdrc: MHDRC RTL version 2.0
  185. [ 2.122399] musb-hdrc: setup fifo_mode 4
  186. [ 2.122413] musb-hdrc: 28/31 max ep, 16384/16384 memory
  187. [ 2.122559] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  188. [ 2.122595] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  189. [ 2.122905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  190. [ 2.122918] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  191. [ 2.122928] usb usb1: Product: MUSB HDRC host driver
  192. [ 2.122938] usb usb1: Manufacturer: Linux 4.4.52-ti-r91 musb-hcd
  193. [ 2.122947] usb usb1: SerialNumber: musb-hdrc.1.auto
  194. [ 2.123834] hub 1-0:1.0: USB hub found
  195. [ 2.123901] hub 1-0:1.0: 1 port detected
  196. [ 2.133771] mousedev: PS/2 mouse device common for all mice
  197. [ 2.136496] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  198. [ 2.137327] i2c /dev entries driver
  199. [ 2.139027] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  200. [ 2.139467] cpuidle: enable-method property 'ti,am3352' found operations
  201. [ 2.140193] omap_hsmmc 48060000.mmc: Got CD GPIO
  202. [ 2.201514] mmc0: host does not support reading read-only switch, assuming write-enable
  203. [ 2.203541] mmc0: new high speed SDHC card at address 0007
  204. [ 2.204505] mmcblk0: mmc0:0007 SL16G 14.5 GiB
  205. [ 2.206066] mmcblk0: p1
  206. [ 2.244969] mmc1: MAN_BKOPS_EN bit is not set
  207. [ 2.252468] mmc1: new high speed MMC card at address 0001
  208. [ 2.253446] mmcblk1: mmc1:0001 S10004 3.56 GiB
  209. [ 2.253892] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
  210. [ 2.254388] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
  211. [ 2.255536] mmcblk1: p1
  212. [ 2.312011] hidraw: raw HID events driver (C) Jiri Kosina
  213. [ 2.312745] usbcore: registered new interface driver usbhid
  214. [ 2.312757] usbhid: USB HID core driver
  215. [ 2.313108] ashmem: initialized
  216. [ 2.314069] remoteproc0: wkup_m3 is available
  217. [ 2.314084] remoteproc0: Note: remoteproc is still under development and considered experimental.
  218. [ 2.314092] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
  219. [ 2.321049] NET: Registered protocol family 10
  220. [ 2.322088] omap_hsmmc 47810000.mmc: card claims to support voltages below defined range
  221. [ 2.322929] mip6: Mobile IPv6
  222. [ 2.322956] NET: Registered protocol family 17
  223. [ 2.323182] Key type dns_resolver registered
  224. [ 2.323203] mpls_gso: MPLS GSO support
  225. [ 2.323551] omap_voltage_late_init: Voltage driver support not added
  226. [ 2.331491] PM: Cannot get wkup_m3_ipc handle
  227. [ 2.336091] ThumbEE CPU extension supported.
  228. [ 2.336127] Registering SWP/SWPB emulation handler
  229. [ 2.337337] registered taskstats version 1
  230. [ 2.337575] zswap: loaded using pool lzo/zbud
  231. [ 2.342063] Btrfs loaded
  232. [ 2.344877] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  233. [ 2.345871] mmc2: new high speed SDIO card at address 0001
  234. [ 2.371013] Key type encrypted registered
  235. [ 2.374000] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0
  236. [ 2.400495] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  237. [ 2.401084] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  238. [ 2.401333] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  239. [ 2.403245] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  240. [ 2.403683] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  241. [ 2.404067] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  242. [ 2.404443] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  243. [ 2.404485] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
  244. [ 2.405764] remoteproc0: powering up wkup_m3
  245. [ 2.405840] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
  246. [ 2.406098] remoteproc0: remote processor wkup_m3 is now up
  247. [ 2.406122] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
  248. [ 2.411838] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,BWA5,1650BBWG2922'
  249. [ 2.411872] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
  250. [ 2.450265] bone_capemgr bone_capemgr: slot #0: No cape found
  251. [ 2.490265] bone_capemgr bone_capemgr: slot #1: No cape found
  252. [ 2.530256] bone_capemgr bone_capemgr: slot #2: No cape found
  253. [ 2.570250] bone_capemgr bone_capemgr: slot #3: No cape found
  254. [ 2.570351] bone_capemgr bone_capemgr: initialized OK.
  255. [ 2.572348] PM: bootloader does not support rtc-only!
  256. [ 2.573375] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
  257. [ 2.573408] of_cfs_init
  258. [ 2.573531] of_cfs_init: OK
  259. [ 2.582731] PM: Hibernation image not present or could not be loaded.
  260. [ 2.584413] Freeing unused kernel memory: 744K (c0eda000 - c0f94000)
  261. [ 2.692949] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  262. [ 2.693686] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  263. [ 2.693809] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  264. [ 2.711981] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  265. [ 2.712435] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  266. [ 2.712623] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  267. [ 2.713390] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  268. [ 2.714012] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  269. [ 2.714899] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  270. [ 2.715584] random: udevadm: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
  271. [ 4.952673] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices
  272. [ 4.953912] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 !
  273. [ 4.964413] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 !
  274. [ 5.005126] remoteproc1: 4a334000.pru0 is available
  275. [ 5.005150] remoteproc1: Note: remoteproc is still under development and considered experimental.
  276. [ 5.005159] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
  277. [ 5.005450] remoteproc1: Direct firmware load for am335x-pru0-fw failed with error -2
  278. [ 5.005472] remoteproc1: failed to load am335x-pru0-fw
  279. [ 5.039754] pru-rproc 4a334000.pru0: booting the PRU core manually
  280. [ 5.039786] remoteproc1: powering up 4a334000.pru0
  281. [ 5.039898] remoteproc1: Direct firmware load for am335x-pru0-fw failed with error -2
  282. [ 5.039915] remoteproc1: request_firmware failed: -2
  283. [ 5.045139] pru-rproc 4a334000.pru0: rproc_boot failed
  284. [ 5.173918] remoteproc1: releasing 4a334000.pru0
  285. [ 5.174098] pru-rproc: probe of 4a334000.pru0 failed with error -2
  286. [ 5.178073] remoteproc1: 4a338000.pru1 is available
  287. [ 5.178098] remoteproc1: Note: remoteproc is still under development and considered experimental.
  288. [ 5.178107] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
  289. [ 5.178471] remoteproc1: Direct firmware load for am335x-pru1-fw failed with error -2
  290. [ 5.178493] remoteproc1: failed to load am335x-pru1-fw
  291. [ 5.186676] pru-rproc 4a338000.pru1: booting the PRU core manually
  292. [ 5.186705] remoteproc1: powering up 4a338000.pru1
  293. [ 5.186812] remoteproc1: Direct firmware load for am335x-pru1-fw failed with error -2
  294. [ 5.186829] remoteproc1: request_firmware failed: -2
  295. [ 5.192015] pru-rproc 4a338000.pru1: rproc_boot failed
  296. [ 5.305965] remoteproc1: releasing 4a338000.pru1
  297. [ 5.306139] pru-rproc: probe of 4a338000.pru1 failed with error -2
  298. [ 16.359055] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  299. [ 16.956452] systemd[1]: System time before build time, advancing clock.
  300. [ 17.012566] systemd[1]: Failed to insert module 'kdbus': Function not implemented
  301. [ 17.058649] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  302. [ 17.059414] systemd[1]: Detected architecture arm.
  303. [ 17.061004] systemd[1]: Set hostname to <beaglebone>.
  304. [ 17.682784] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  305. [ 17.683619] systemd[1]: Listening on Journal Socket.
  306. [ 17.683781] systemd[1]: Reached target Remote File Systems (Pre).
  307. [ 17.683874] systemd[1]: Reached target Remote File Systems.
  308. [ 17.684296] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  309. [ 17.684545] systemd[1]: Listening on fsck to fsckd communication Socket.
  310. [ 17.685510] systemd[1]: Created slice User and Session Slice.
  311. [ 17.685645] systemd[1]: Reached target Encrypted Volumes.
  312. [ 17.685779] systemd[1]: Reached target Swap.
  313. [ 17.686833] systemd[1]: Created slice System Slice.
  314. [ 17.692322] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  315. [ 17.692492] systemd[1]: Reached target Slices.
  316. [ 17.726782] systemd[1]: Starting Load Kernel Modules...
  317. [ 17.728062] systemd[1]: Created slice system-serial\x2dgetty.slice.
  318. [ 17.729144] systemd[1]: Created slice system-getty.slice.
  319. [ 17.783080] systemd[1]: Mounting /sys/kernel/debug...
  320. [ 17.783885] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  321. [ 17.784442] systemd[1]: Listening on Journal Socket (/dev/log).
  322. [ 17.784905] systemd[1]: Listening on udev Kernel Socket.
  323. [ 17.785704] systemd[1]: Listening on Journal Audit Socket.
  324. [ 17.786061] systemd[1]: Listening on Syslog Socket.
  325. [ 17.870852] systemd[1]: Starting Journal Service...
  326. [ 17.871037] systemd[1]: Reached target Paths.
  327. [ 17.912041] systemd[1]: Starting Remount Root and Kernel File Systems...
  328. [ 17.912565] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  329. [ 17.956881] systemd[1]: Mounting POSIX Message Queue File System...
  330. [ 17.957516] systemd[1]: Listening on udev Control Socket.
  331. [ 18.083151] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
  332. [ 18.125319] systemd[1]: Mounted POSIX Message Queue File System.
  333. [ 18.125671] systemd[1]: Mounted /sys/kernel/debug.
  334. [ 18.167800] systemd[1]: Started Create list of required static device nodes for the current kernel.
  335. [ 18.172637] systemd[1]: Started Load Kernel Modules.
  336. [ 18.184076] systemd[1]: Started Remount Root and Kernel File Systems.
  337. [ 18.221576] systemd[1]: Starting Load/Save Random Seed...
  338. [ 18.265989] systemd[1]: Starting udev Coldplug all Devices...
  339. [ 18.330495] systemd[1]: Mounting FUSE Control File System...
  340. [ 18.411545] systemd[1]: Starting Apply Kernel Variables...
  341. [ 18.460334] systemd[1]: Mounting Configuration File System...
  342. [ 18.556969] systemd[1]: Starting Create Static Device Nodes in /dev...
  343. [ 18.664276] systemd[1]: Mounted FUSE Control File System.
  344. [ 18.664784] systemd[1]: Mounted Configuration File System.
  345. [ 18.665632] systemd[1]: Started Journal Service.
  346. [ 19.232389] systemd-journald[552]: Received request to flush runtime journal from PID 1
  347. [ 20.298374] random: nonblocking pool is initialized
  348. [ 26.520487] using random self ethernet address
  349. [ 26.520519] using random host ethernet address
  350. [ 26.660794] using random self ethernet address
  351. [ 26.660824] using random host ethernet address
  352. [ 26.958785] Mass Storage Function, version: 2009/09/11
  353. [ 26.958820] LUN: removable file: (no medium)
  354. [ 27.254555] usb0: HOST MAC 50:65:83:db:8d:31
  355. [ 27.256014] usb0: MAC 50:65:83:db:8d:32
  356. [ 27.273356] usb1: HOST MAC 50:65:83:db:8d:34
  357. [ 27.274008] usb1: MAC 50:65:83:db:8d:35
  358. [ 27.702781] configfs-gadget gadget: high-speed config #1: c
  359. [ 40.072624] tda998x 0-0070: found TDA19988
  360. [ 40.082779] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops [tda998x])
  361. [ 40.082817] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  362. [ 40.082826] [drm] No driver support for vblank timestamp query.
  363. [ 40.084389] tilcdc 4830e000.lcdc: No connectors reported connected with modes
  364. [ 40.084427] [drm] Cannot find any crtc or sizes - going 1024x768
  365. [ 40.305750] Console: switching to colour frame buffer device 128x48
  366. [ 40.474589] tilcdc 4830e000.lcdc: fb0: frame buffer device
  367. [ 40.474636] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
  368. [ 40.475914] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
  369. [ 42.166056] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  370. [ 42.263999] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  371. [ 46.936330] bone_capemgr bone_capemgr: part_number 'cape-universaln', version 'N/A'
  372. [ 46.936371] bone_capemgr bone_capemgr: slot #4: override
  373. [ 46.936388] bone_capemgr bone_capemgr: Using override eeprom data at slot 4
  374. [ 46.936406] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,cape-universaln'
  375. [ 47.290155] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0
  376. [ 47.294857] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1
  377. [ 47.295095] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2
  378. [ 47.295263] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3
  379. [ 47.295431] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4
  380. [ 47.295598] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5
  381. [ 47.295755] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6
  382. [ 47.295922] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7
  383. [ 47.296085] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8
  384. [ 47.296253] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9
  385. [ 47.296409] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10
  386. [ 47.296563] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11
  387. [ 47.296729] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12
  388. [ 47.296885] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13
  389. [ 47.297041] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14
  390. [ 47.297205] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15
  391. [ 47.297373] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16
  392. [ 47.297533] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17
  393. [ 47.297697] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18
  394. [ 47.297859] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19
  395. [ 47.298025] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20
  396. [ 47.314635] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21
  397. [ 47.314891] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22
  398. [ 47.315087] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23
  399. [ 47.315253] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24
  400. [ 47.315419] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25
  401. [ 47.315594] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26
  402. [ 47.315765] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27
  403. [ 47.315929] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28
  404. [ 47.316098] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29
  405. [ 47.316260] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30
  406. [ 47.316427] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31
  407. [ 47.316592] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32
  408. [ 47.316604] gpio-of-helper ocp:cape-universal: ready
  409. [ 47.334707] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 197, base_baud = 3000000) is a 8250
  410. [ 47.348227] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 198, base_baud = 3000000) is a 8250
  411. [ 47.360343] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 199, base_baud = 3000000) is a 8250
  412. [ 47.380150] eqep 48300180.eqep: ver. 1.0
  413. [ 47.388870] eqep 48302180.eqep: ver. 1.0
  414. [ 47.409826] eqep 48304180.eqep: ver. 1.0
  415. [ 47.435313] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
  416. [ 47.452386] bone_capemgr bone_capemgr: slot #4: dtbo 'cape-universaln-00A0.dtbo' loaded; overlay id #0
  417. [ 47.895583] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok
  418. [ 49.475360] Bluetooth: Core ver 2.21
  419. [ 49.475534] NET: Registered protocol family 31
  420. [ 49.475546] Bluetooth: HCI device and connection manager initialized
  421. [ 49.475577] Bluetooth: HCI socket layer initialized
  422. [ 49.475596] Bluetooth: L2CAP socket layer initialized
  423. [ 49.475641] Bluetooth: SCO socket layer initialized
  424. [ 49.498691] Bluetooth: HCI UART driver ver 2.3
  425. [ 49.498725] Bluetooth: HCI UART protocol H4 registered
  426. [ 49.498733] Bluetooth: HCI UART protocol BCSP registered
  427. [ 49.498741] Bluetooth: HCI UART protocol LL registered
  428. [ 49.498748] Bluetooth: HCI UART protocol ATH3K registered
  429. [ 49.498755] Bluetooth: HCI UART protocol Three-wire (H5) registered
  430. [ 49.499209] Bluetooth: HCI UART protocol BCM registered
  431. [ 49.499222] Bluetooth: HCI UART protocol QCA registered
  432. [ 50.540269] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
  433. [ 50.627074] wlcore: loaded
  434. [ 51.112083] wlcore: PHY firmware version: Rev 8.2.0.0.236
  435. [ 51.159565] wlcore: firmware booted (Rev 8.9.0.0.69)
  436. [ 51.190741] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  437. [ 51.208657] CAN device driver interface
  438. [ 51.298987] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=208)
  439. [ 51.366801] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=209)
  440. [ 52.634830] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  441. [ 52.634856] Bluetooth: BNEP filters: protocol multicast
  442. [ 52.641629] IPv6: ADDRCONF(NETDEV_UP): SoftAp0: link is not ready
  443. [ 52.645877] Bluetooth: BNEP socket layer initialized
  444. [ 52.881207] wlan0: authenticate with c2:56:27:d4:7e:8f
  445. [ 52.897506] wlan0: send auth to c2:56:27:d4:7e:8f (try 1/3)
  446. [ 52.929171] wlan0: authenticated
  447. [ 52.938470] wlan0: associate with c2:56:27:d4:7e:8f (try 1/3)
  448. [ 52.943422] wlan0: RX AssocResp from c2:56:27:d4:7e:8f (capab=0x431 status=0 aid=4)
  449. [ 52.957287] ip_tables: (C) 2000-2006 Netfilter Core Team
  450. [ 52.960815] wlan0: associated
  451. [ 52.960892] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  452. [ 53.049285] nf_conntrack version 0.5.0 (7808 buckets, 31232 max)
  453. [ 53.213131] wlcore: Association completed.
  454. [ 54.359261] wlcore: down
  455. [ 54.451861] IPv6: ADDRCONF(NETDEV_CHANGE): SoftAp0: link becomes ready
RAW Paste Data