[2018-11-19 16:56:58] [Output] : * Russell Evans presses the button on the ramp controls raising the car lift. *
[2018-11-19 16:57:33] [Output] : ★ Russell Evans goes next to the cabinet as he grabs his toolbox.
[2018-11-19 16:57:48] [Output] : ★ Russell Evans puts it down on the ground as he opens it.
[2018-11-19 16:58:12] [Output] : ★ Russell Evans moves to the shelf as he grabs two boxes, placing them under the car afterwards.
[2018-11-19 17:05:45] [Output] : ★ Russell Evans opens the toolbox as he grabs a 17mm socket, placing it on his socket wrench.
[2018-11-19 17:06:15] [Output] : ★ Russell Evans places the socket on the 17mm socket connecting the catback as he starts unbolting the first
[2018-11-19 17:06:17] [Output] : ★ -bolt      ((Russell Evans))
[2018-11-19 17:06:43] [Output] : ★ Russell Evans unbolts the first one as he grabs the bolt on his palm.
[2018-11-19 17:06:55] [Output] : ★ Russell Evans starts unbolting the second one as he goes up and down.
[2018-11-19 17:07:07] [Output] : ★ Russell Evans unbolts it as he would hold the catback with his right arm.
[2018-11-19 17:08:04] [Output] : ★ Russell Evans lets the bolt fall down from his palm as he puts the wrench down, holding the catback.
[2018-11-19 17:09:21] [Output] : ★ Russell Evans wiggles the catback as he removes it from the rubber hanger.
[2018-11-19 17:09:36] [Output] : ★ Russell Evans puts the old catback down next to the lift.
[2018-11-19 17:10:27] [Output] : ★ Russell Evans bends down as he grabs the socket wrench, as he removes the 17mm socket.
[2018-11-19 17:10:53] [Output] : ★ Russell Evans grabs a 14mm socket as he slides it on the socket wrench.
[2018-11-19 17:11:30] [Output] : ★ Russell Evans places the socket on the 14mm bolt of the muffler/mid pipe as he starts unbolting it.
[2018-11-19 17:11:47] [Output] : ★ Russell Evans unbolts the first bolt as he gets it on his palm, placing the socket on the second bolt hold
[2018-11-19 17:11:49] [Output] : ★ holding the pipe.      ((Russell Evans))
[2018-11-19 17:12:03] [Output] : ★ Russell Evans unbolts the second bolt as he goes up and down with the wrench.
[2018-11-19 17:12:48] [Output] : ★ Russell Evans places his hand on the pipe as he unbolts the last bolt, letting it go on the ground.
[2018-11-19 17:13:01] [Output] : ★ Russell Evans puts the first bolt down with the wrench as he slowly lowers the midpipe.
[2018-11-19 17:13:14] [Output] : ★ Russell Evans unscrews the sensor by hand as he frees the pipe .
[2018-11-19 17:13:22] [Output] : ★ Russell Evans puts it down next to the old catback.
[2018-11-19 17:13:41] [Output] : ★ Russell Evans goes back to the toolbox as he grabs a cutter.
[2018-11-19 17:13:51] [Output] : ★ Russell Evans cuts open the exhaust system box.
[2018-11-19 17:17:15] [Output] : ★ Russell Evans grabs the new mid pipe as he lifts it towards the down pipe.
[2018-11-19 17:17:44] [Output] : ★ Russell Evans grabs the new bolts in his palm as he connects the mid pipe to the down pipe.
[2018-11-19 17:17:55] [Output] : ★ Russell Evans hand screws the first bolt as he holds the mid pipe flush.
[2018-11-19 17:18:28] [Output] : ★ Russell Evans screws the second one tightly  as he wiggles the mid pipe.
[2018-11-19 17:19:03] [Output] : ★ Russell Evans grabs his wrench socket as he tights down the first bolt snug.
[2018-11-19 17:19:14] [Output] : ★ Russell Evans proceeds to the second one as he tights it down snuggly.
[2018-11-19 17:19:51] [Output] : ★ Russell Evans bends down as he grabs the new catback with the flange.
[2018-11-19 17:20:26] [Output] : ★ Russell Evans grabs one bolt as he lifts the catback, finally letting the flange down
[2018-11-19 17:24:30] [Output] : ★ Russell Evans wiggles the back pin of the catback on the rubber hanger as he secures the back section.
[2018-11-19 17:24:42] [Output] : ★ Russell Evans lifts the front section as he aligns it with the frame hole.
[2018-11-19 17:24:57] [Output] : ★ Russell Evans grabs the hole from his palm as he starts bolting by hand the metal hanger.
[2018-11-19 17:25:10] [Output] : ★ Russell Evans bends down as he grabs the flange with the bolt.
[2018-11-19 17:25:37] [Output] : ★ Russell Evans places the flange between the mid pipe and the catback as he runs the bolt through the
[2018-11-19 17:25:39] [Output] : ★ flange hole.      ((Russell Evans))
[2018-11-19 17:25:45] [Output] : ★ Russell Evans bends down and grabs a nut from the box.
[2018-11-19 17:25:56] [Output] : ★ Russell Evans screws the nut by hand.
[2018-11-19 17:26:10] [Output] : ★ Russell Evans walks towards the mid pipe as he grabs the sensor, screwing it back snuggly.
[2018-11-19 17:26:51] [Output] : ★ Russell Evans grabs the wrench socket as he places the socket on the metal hanger, bolting the bolt.
[2018-11-19 17:27:10] [Output] : ★ Russell Evans bends down as he grabs a 14mm wrench, placing it on the flat side of the bolt of the flange.
[2018-11-19 17:27:27] [Output] : ★ Russell Evans slides the socket on the nut as he starts screwing the nut snuggly.
[2018-11-19 17:27:34] [Output] : ★ as he holds the bolt with the screw.      ((Russell Evans))
[2018-11-19 17:29:08] [Output] : ★ Russell Evans grabs his toolbox as he slides it out of the lift's clearence.
[2018-11-19 17:29:21] [Output] : ★ the lift would have clearence to go down, it would be empty.      ((Russell Evans))