Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- INFO Reading configuration /config/esphome/devboard2_wemosd1.yaml...
- INFO Detected timezone 'UTC' with UTC offset 0
- INFO Starting log output from 192.168.0.162 using esphome API
- INFO Connecting to 192.168.0.162:6053 (192.168.0.162)
- INFO Successfully connected to 192.168.0.162
- [00:22:33][I][app:100]: ESPHome version 1.14.3 compiled on Jan 18 2020, 00:11:06
- [00:22:33][C][wifi:415]: WiFi:
- [00:22:33][C][wifi:283]: SSID: [redacted]
- [00:22:33][C][wifi:284]: IP Address: 192.168.0.162
- [00:22:33][C][wifi:286]: BSSID: [redacted]
- [00:22:33][C][wifi:287]: Hostname: 'devboard2_wemosd1'
- [00:22:33][C][wifi:291]: Signal strength: -74 dB ▂▄▆█
- [00:22:33][C][wifi:295]: Channel: 1
- [00:22:33][C][wifi:296]: Subnet: 255.255.255.0
- [00:22:33][C][wifi:297]: Gateway: 192.168.0.1
- [00:22:33][C][wifi:298]: DNS1: (IP unset)
- [00:22:33][C][wifi:299]: DNS2: (IP unset)
- [00:22:33][C][uart:140]: UART Bus:
- [00:22:33][C][uart:142]: TX Pin: GPIO4
- [00:22:33][C][uart:145]: RX Pin: GPIO0
- [00:22:33][C][uart:147]: Baud Rate: 9600 baud
- [00:22:33][C][uart:148]: Stop bits: 2
- [00:22:33][C][uart:152]: Using software serial
- [00:22:33][C][modbus:096]: Modbus:
- [00:22:33][C][logger:175]: Logger:
- [00:22:33][C][logger:176]: Level: DEBUG
- [00:22:33][C][logger:177]: Log Baud Rate: 0
- [00:22:33][C][logger:178]: Hardware UART: UART0
- [00:22:33][C][pzemac:061]: PZEMAC:
- [00:22:33][C][pzemac:062]: Address: 0x01
- [00:22:33][C][pzemac:063]: Voltage 'PZEM-004T V3 Voltage'
- [00:22:33][C][pzemac:063]: Unit of Measurement: 'V'
- [00:22:33][C][pzemac:063]: Accuracy Decimals: 1
- [00:22:33][C][pzemac:063]: Icon: 'mdi:flash'
- [00:22:33][C][pzemac:064]: Current 'PZEM-004T V3 Current'
- [00:22:33][C][pzemac:064]: Unit of Measurement: 'A'
- [00:22:33][C][pzemac:064]: Accuracy Decimals: 3
- [00:22:33][C][pzemac:064]: Icon: 'mdi:current-ac'
- [00:22:33][C][pzemac:065]: Power 'PZEM-004T V3 Power'
- [00:22:33][C][pzemac:065]: Unit of Measurement: 'W'
- [00:22:33][C][pzemac:065]: Accuracy Decimals: 1
- [00:22:33][C][pzemac:065]: Icon: 'mdi:power'
- [00:22:33][C][pzemac:066]: Frequency 'PZEM-004T V3 Frequency'
- [00:22:33][C][pzemac:066]: Unit of Measurement: 'hz'
- [00:22:33][C][pzemac:066]: Accuracy Decimals: 1
- [00:22:33][C][pzemac:066]: Icon: 'mdi:current-ac'
- [00:22:33](Message skipped because it was too big to fit in TCP buffer - This is only cosmetic)
- [00:22:33](Message skipped because it was too big to fit in TCP buffer - This is only cosmetic)
- [00:22:33](Message skipped because it was too big to fit in TCP buffer - This is only cosmetic)
- [00:22:33](Message skipped because it was too big to fit in TCP buffer - This is only cosmetic)
- [00:22:33][C][total_daily_energy:022]: Total Daily Energy 'PZEM-004T V3 Total Daily Energy'
- [00:22:33][C][total_daily_energy:022]: Unit of Measurement: 'kWh'
- [00:22:33][C][total_daily_energy:022]: Accuracy Decimals: 4
- [00:22:33][C][total_daily_energy:022]: Icon: 'mdi:counter'
- [00:22:33][C][homeassistant.time:010]: Home Assistant Time:
- [00:22:33][C][homeassistant.time:011]: Timezone: 'UTC0'
- [00:22:33][C][ota:029]: Over-The-Air Updates:
- [00:22:33][C][ota:030]: Address: 192.168.0.162:8266
- [00:22:33][C][api:095]: API Server:
- [00:22:33][C][api:096]: Address: 192.168.0.162:6053
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement