API tools faq
paste
eganov

Untitled

eganov
Jul 11th, 2020
80
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.79 KB | None | 0 0
raw download clone embed print report
  1.  
  2. (IPQ) # bootm
  3. Loading Kernel Image ... OK
  4. OK
  5.  
  6. device nand0 <nand0>, # parts = 1
  7. #: name size offset mask_flags
  8. 0: firmware 0x0dc00000 0x02400000 0
  9.  
  10. active partition: nand0,0 - (firmware) 0x0dc00000 @ 0x02400000
  11.  
  12. defaults:
  13. mtdids : none
  14. mtdparts: none
  15. Setting up atags for msm partition: firmware
  16. Using machid 0x177e from environment
  17.  
  18. Starting kernel ...
  19.  
  20. [ 0.000000] Booting Linux on physical CPU 0x0
  21. [ 0.000000] Linux version 5.4.48 (lauro@Server) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13657-32c8ab944e)) #0 SMP Sun Jun 28 06:45:05 2020
  22. [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
  23. [ 0.000000] CPU: div instructions available: patching division code
  24. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  25. [ 0.000000] OF: fdt: Machine model: Askey RT4230W
  26. [ 0.000000] Memory policy: Data cache writealloc
  27. [ 0.000000] percpu: Embedded 15 pages/cpu s30028 r8192 d23220 u61440
  28. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 252224
  29. [ 0.000000] Kernel command line: rootfstype=squashfs noinitrd
  30. [ 0.000000] Bootloader command line (ignored):
  31. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  32. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  33. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  34. [ 0.000000] Memory: 985956K/1015808K available (5914K kernel code, 188K rwdata, 1508K rodata, 11264K init, 228K bss, 29852K reserved, 0K cma-reserved, 229376K highmem)
  35. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  36. [ 0.000000] rcu: Hierarchical RCU implementation.
  37. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  38. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  39. [ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x4e4 with crng_init=0
  40. [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
  41. [ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
  42. [ 0.000022] Switching to timer-based delay loop, resolution 160ns
  43. [ 0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
  44. [ 0.000265] pid_max: default: 32768 minimum: 301
  45. [ 0.000474] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  46. [ 0.000498] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  47. [ 0.001542] CPU: Testing write buffer coherency: ok
  48. [ 0.002687] Setting up static identity map for 0x42300000 - 0x42300060
  49. [ 0.002866] rcu: Hierarchical SRCU implementation.
  50. [ 0.003361] smp: Bringing up secondary CPUs ...
  51. [ 0.005291] smp: Brought up 1 node, 2 CPUs
  52. [ 0.005308] SMP: Total of 2 processors activated (25.00 BogoMIPS).
  53. [ 0.005318] CPU: All CPU(s) started in SVC mode.
  54. [ 0.015210] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
  55. [ 0.015360] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  56. [ 0.015388] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  57. [ 0.015564] pinctrl core: initialized pinctrl subsystem
  58. [ 0.016713] NET: Registered protocol family 16
  59. [ 0.017032] DMA: preallocated 256 KiB pool for atomic coherent allocations
  60. [ 0.018349] cpuidle: using governor ladder
  61. [ 0.018415] cpuidle: using governor menu
  62. [ 0.048928] usbcore: registered new interface driver usbfs
  63. [ 0.049010] usbcore: registered new interface driver hub
  64. [ 0.049093] usbcore: registered new device driver usb
  65. [ 0.049150] pps_core: LinuxPPS API ver. 1 registered
  66. [ 0.049164] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  67. [ 0.049199] PTP clock support registered
  68. [ 0.050914] clocksource: Switched to clocksource dg_timer
  69. [ 0.051954] thermal_sys: Registered thermal governor 'step_wise'
  70. [ 0.054356] NET: Registered protocol family 2
  71. [ 0.054945] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  72. [ 0.054986] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  73. [ 0.055052] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  74. [ 0.055149] TCP: Hash tables configured (established 8192 bind 8192)
  75. [ 0.055259] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  76. [ 0.055298] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  77. [ 0.055551] NET: Registered protocol family 1
  78. [ 0.055601] PCI: CLS 0 bytes, default 64
  79. [ 0.293296] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  80. [ 0.299836] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  81. [ 0.299851] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  82. [ 0.336868] bounce: pool size: 64 pages
  83. [ 0.338443] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
  84. [ 0.338585] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
  85. [ 0.338698] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
  86. [ 0.338975] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
  87. [ 0.339051] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
  88. [ 0.339093] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x08000000
  89. [ 0.465741] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
  90. [ 0.465768] pci_bus 0000:00: root bus resource [bus 00-ff]
  91. [ 0.465788] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
  92. [ 0.465806] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
  93. [ 0.465871] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
  94. [ 0.466037] pci 0000:00:00.0: supports D1
  95. [ 0.466053] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  96. [ 0.469893] PCI: bus0: Fast back to back transfers disabled
  97. [ 0.470227] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
  98. [ 0.470583] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  99. [ 0.471840] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  100. [ 0.475907] PCI: bus1: Fast back to back transfers disabled
  101. [ 0.475993] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
  102. [ 0.476017] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
  103. [ 0.476146] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  104. [ 0.476172] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
  105. [ 0.477122] pcieport 0000:00:00.0: AER: enabled with IRQ 35
  106. [ 0.477622] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
  107. [ 0.477745] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
  108. [ 0.477863] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
  109. [ 0.478138] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
  110. [ 0.478202] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e00000
  111. [ 0.478239] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e000000
  112. [ 0.605970] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
  113. [ 0.605992] pci_bus 0001:00: root bus resource [bus 00-ff]
  114. [ 0.606008] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
  115. [ 0.606064] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
  116. [ 0.606214] pci 0001:00:00.0: supports D1
  117. [ 0.606229] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
  118. [ 0.610003] PCI: bus0: Fast back to back transfers disabled
  119. [ 0.610328] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
  120. [ 0.610706] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  121. [ 0.612040] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
  122. [ 0.612343] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
  123. [ 0.616155] PCI: bus1: Fast back to back transfers disabled
  124. [ 0.616231] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
  125. [ 0.616254] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
  126. [ 0.616386] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
  127. [ 0.616407] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
  128. [ 0.617310] pcieport 0001:00:00.0: AER: enabled with IRQ 37
  129. [ 0.619791] L2 @ QSB rate. Forcing new rate.
  130. [ 0.620026] L2 @ 384000 KHz
  131. [ 0.620211] CPU0 @ 800000 KHz
  132. [ 0.620223] CPU1 @ QSB rate. Forcing new rate.
  133. [ 0.620352] CPU1 @ 384000 KHz
  134. [ 0.624121] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
  135. [ 0.626421] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  136. [ 0.627216] msm_serial 16340000.serial: msm_serial: detected port #0
  137. [ 0.627272] msm_serial 16340000.serial: uartclk = 7372800
  138. [ 0.627344] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 38, base_baud = 460800) is a MSM
  139. [ 0.627385] msm_serial: console setup on port #0
  140. [ 1.388865] printk: console [ttyMSM0] enabled
  141. [ 1.393932] msm_serial: driver initialized
  142. [ 1.403135] loop: module loaded
  143. [ 1.404688] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xaa
  144. [ 1.405088] nand: Macronix MX30UF2G18AC
  145. [ 1.411779] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  146. [ 1.415458] 21 fixed-partitions partitions found on MTD device qcom_nand.0
  147. [ 1.422960] Creating 21 MTD partitions on "qcom_nand.0":
  148. [ 1.429748] 0x000000000000-0x000000040000 : "SBL1"
  149. [ 1.436695] 0x000000040000-0x000000180000 : "MIBIB"
  150. [ 1.442810] 0x000000180000-0x0000002c0000 : "SBL2"
  151. [ 1.447439] 0x0000002c0000-0x000000540000 : "SBL3"
  152. [ 1.450155] random: fast init done
  153. [ 1.458433] 0x000000540000-0x000000660000 : "DDRCONFIG"
  154. [ 1.461141] 0x000000660000-0x000000780000 : "SSD"
  155. [ 1.465491] 0x000000780000-0x000000a00000 : "TZ"
  156. [ 1.472523] 0x000000a00000-0x000000c80000 : "RPM"
  157. [ 1.477406] 0x000000c80000-0x000001180000 : "APPSBL_1"
  158. [ 1.486347] 0x000001180000-0x000001200000 : "APPSBLENV"
  159. [ 1.488046] 0x000001200000-0x000001340000 : "art"
  160. [ 1.493360] 0x000001340000-0x0000013a0000 : "BOOTCONFIG"
  161. [ 1.496716] 0x0000013a0000-0x0000014e0000 : "SBL2_1"
  162. [ 1.503604] 0x0000014e0000-0x000001760000 : "SBL3_1"
  163. [ 1.510436] 0x000001760000-0x000001880000 : "DDRCONFIG_1"
  164. [ 1.513255] 0x000001880000-0x0000019a0000 : "SSD_1"
  165. [ 1.518503] 0x0000019a0000-0x000001c20000 : "TZ_1"
  166. [ 1.525418] 0x000001c20000-0x000001ea0000 : "RPM_1"
  167. [ 1.530281] 0x000001ea0000-0x000001f00000 : "BOOTCONFIG1"
  168. [ 1.531909] 0x000001f00000-0x000002400000 : "APPSBL"
  169. [ 1.544585] 0x000002400000-0x00001c400000 : "ubi"
  170. [ 1.544615] mtd: partition "ubi" extends beyond the end of device "qcom_nand.0" -- size truncated to 0xdc00000
  171. [ 1.788224] random: crng init done
  172. [ 1.903834] libphy: GPIO Bitbanged MDIO: probed
  173. [ 1.949708] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
  174. [ 2.818316] ar8327: qca,phy-rgmii-en is not specified
  175. [ 2.818983] libphy: Fixed MDIO Bus: probed
  176. [ 2.823138] ipq806x-gmac-dwmac 37000000.ethernet: IRQ eth_wake_irq not found
  177. [ 2.826351] ipq806x-gmac-dwmac 37000000.ethernet: IRQ eth_lpi not found
  178. [ 2.834418] ipq806x-gmac-dwmac 37000000.ethernet: PTP uses main clock
  179. [ 2.840673] ipq806x-gmac-dwmac 37000000.ethernet: User ID: 0x10, Synopsys ID: 0x37
  180. [ 2.846590] ipq806x-gmac-dwmac 37000000.ethernet: DWMAC1000
  181. [ 2.854038] ipq806x-gmac-dwmac 37000000.ethernet: DMA HW capability register supported
  182. [ 2.859771] ipq806x-gmac-dwmac 37000000.ethernet: RX Checksum Offload Engine supported
  183. [ 2.867559] ipq806x-gmac-dwmac 37000000.ethernet: COE Type 2
  184. [ 2.875462] ipq806x-gmac-dwmac 37000000.ethernet: TX Checksum insertion supported
  185. [ 2.881285] ipq806x-gmac-dwmac 37000000.ethernet: Wake-Up On Lan supported
  186. [ 2.888590] ipq806x-gmac-dwmac 37000000.ethernet: Enhanced/Alternate descriptors
  187. [ 2.895424] ipq806x-gmac-dwmac 37000000.ethernet: Enabled extended descriptors
  188. [ 2.902987] ipq806x-gmac-dwmac 37000000.ethernet: Ring mode enabled
  189. [ 2.909942] ipq806x-gmac-dwmac 37000000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  190. [ 2.917082] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_wake_irq not found
  191. [ 2.924858] ipq806x-gmac-dwmac 37200000.ethernet: IRQ eth_lpi not found
  192. [ 2.932056] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
  193. [ 2.938661] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
  194. [ 2.944829] ipq806x-gmac-dwmac 37200000.ethernet: DWMAC1000
  195. [ 2.952284] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
  196. [ 2.958033] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
  197. [ 2.965840] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
  198. [ 2.973713] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
  199. [ 2.979473] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
  200. [ 2.986936] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
  201. [ 2.993705] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
  202. [ 3.001231] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
  203. [ 3.008204] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  204. [ 3.015461] i2c /dev entries driver
  205. [ 3.025415] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  206. [ 3.026364] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  207. [ 3.034241] sdhci: Secure Digital Host Controller Interface driver
  208. [ 3.040840] sdhci: Copyright(c) Pierre Ossman
  209. [ 3.047159] sdhci-pltfm: SDHCI platform and OF driver helper
  210. [ 3.053862] NET: Registered protocol family 10
  211. [ 3.058626] Segment Routing with IPv6
  212. [ 3.061703] NET: Registered protocol family 17
  213. [ 3.065493] 8021q: 802.1Q VLAN Support v1.8
  214. [ 3.069641] Registering SWP/SWPB emulation handler
  215. [ 3.100494] qcom_rpm 108000.rpm: RPM firmware 3.0.16777377
  216. [ 3.114236] s1a: supplied by regulator-dummy
  217. [ 3.114357] s1a: Bringing 0uV into 1050000-1050000uV
  218. [ 3.117871] s1b: supplied by regulator-dummy
  219. [ 3.122684] s1b: Bringing 0uV into 1050000-1050000uV
  220. [ 3.127036] s2a: supplied by regulator-dummy
  221. [ 3.131876] s2a: Bringing 0uV into 775000-775000uV
  222. [ 3.136247] s2b: supplied by regulator-dummy
  223. [ 3.140642] s2b: Bringing 0uV into 775000-775000uV
  224. [ 3.146820] Speed bin: 0
  225. [ 3.149594] PVS bin: 2
  226. [ 3.160458] UBI: auto-attach mtd20
  227. [ 3.160477] ubi0: attaching mtd20
  228. [ 4.740041] ubi0: scanning is finished
  229. [ 4.750111] ubi0: attached mtd20 (name "ubi", size 220 MiB)
  230. [ 4.750131] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  231. [ 4.754552] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  232. [ 4.761474] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  233. [ 4.768280] ubi0: good PEBs: 1759, bad PEBs: 1, corrupted PEBs: 0
  234. [ 4.775126] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
  235. [ 4.781375] ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 0
  236. [ 4.788421] ubi0: available PEBs: 1716, total reserved PEBs: 43, PEBs reserved for bad PEB handling: 39
  237. [ 4.796764] hctosys: unable to open rtc device (rtc0)
  238. [ 4.796822] [ 4.836340] Freeing unused kernel memory: 11264K
  239. [ 4.836914] Run /init as init process
  240. [ 4.911367] init: Console is alive
  241. [ 4.911731] init: - watchdog -
  242. [ 4.932310] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  243. [ 4.934436] exfat: module is from the staging directory, the quality is unknown, you have been warned.
  244. [ 4.939362] exFAT: Version 1.3.0
  245. [ 4.969231] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  246. [ 4.976323] SCSI subsystem initialized
  247. [ 4.984647] ehci-fsl: Freescale EHCI Host controller driver
  248. [ 4.985131] ehci-platform: EHCI generic platform driver
  249. [ 4.992724] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  250. [ 4.994645] ohci-platform: OHCI generic platform driver
  251. [ 5.002683] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
  252. [ 5.005597] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
  253. [ 5.011592] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
  254. [ 5.017575] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
  255. [ 5.026700] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
  256. [ 5.029733] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
  257. [ 5.035522] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
  258. [ 5.041621] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
  259. [ 5.048712] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
  260. [ 5.102600] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
  261. [ 5.164403] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  262. [ 5.164459] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  263. [ 5.168964] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
  264. [ 5.176468] xhci-hcd xhci-hcd.0.auto: irq 41, io mem 0x11000000
  265. [ 5.186686] hub 1-0:1.0: USB hub found
  266. [ 5.191734] hub 1-0:1.0: 1 port detected
  267. [ 5.195633] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  268. [ 5.199523] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  269. [ 5.204880] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  270. [ 5.213629] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  271. [ 5.219331] hub 2-0:1.0: USB hub found
  272. [ 5.227292] hub 2-0:1.0: 1 port detected
  273. [ 5.231020] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  274. [ 5.234907] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
  275. [ 5.240270] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
  276. [ 5.247787] xhci-hcd xhci-hcd.1.auto: irq 42, io mem 0x10000000
  277. [ 5.257688] hub 3-0:1.0: USB hub found
  278. [ 5.263085] hub 3-0:1.0: 1 port detected
  279. [ 5.266965] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  280. [ 5.270866] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
  281. [ 5.276228] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  282. [ 5.283917] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  283. [ 5.290633] hub 4-0:1.0: USB hub found
  284. [ 5.298642] hub 4-0:1.0: 1 port detected
  285. [ 5.304468] usbcore: registered new interface driver usb-storage
  286. [ 5.306268] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  287. [ 5.318913] init: - preinit -
  288. [ 5.641379] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  289. [ 5.917055] usb-storage 3-1:1.0: USB Mass Storage device detected
  290. [ 5.918301] scsi host0: usb-storage 3-1:1.0
  291. [ 6.468871] dwmac1000: Master AXI performs any burst length
  292. [ 6.468902] ipq806x-gmac-dwmac 37200000.ethernet eth1: No Safety Features support found
  293. [ 6.473316] ipq806x-gmac-dwmac 37200000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
  294. [ 6.481404] ipq806x-gmac-dwmac 37200000.ethernet eth1: registered PTP clock
  295. [ 6.490264] ipq806x-gmac-dwmac 37200000.ethernet eth1: configuring for fixed/sgmii link mode
  296. [ 6.497863] ipq806x-gmac-dwmac 37200000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
  297. [ 6.506477] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  298. Press the [f] key and hit [enter] to enter failsafe mode
  299. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  300. [ 8.280087] scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS
  301. [ 8.283990] sd 0:0:0:0: [sda] 122683392 512-byte logical blocks: (62.8 GB/58.5 GiB)
  302. [ 8.288866] sd 0:0:0:0: [sda] Write Protect is off
  303. [ 8.296426] sd 0:0:0:0: [sda] No Caching mode page found
  304. [ 8.299856] sd 0:0:0:0: [sda] Assuming drive cache: write through
  305. [ 8.309684] sda: sda1
  306. [ 8.313473] sd 0:0:0:0: [sda] Attached SCSI removable disk
  307. [ 10.668764] ipq806x-gmac-dwmac 37200000.ethernet eth1: Link is Down
  308. [ 10.720987] procd: - early -
  309. [ 10.721168] procd: - watchdog -
  310. [ 11.286173] procd: - watchdog -
  311. [ 11.286815] procd: - ubus -
  312. [ 11.341025] procd: - init -
  313. Please press Enter to activate this console.
  314. [ 11.515617] kmodloader: loading kernel modules from /etc/modules.d/*
  315. [ 11.516147] urngd: v1.0.2 started.
  316. [ 11.519090] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  317. [ 11.532672] Loading modules backported from Linux version v5.7-rc3-0-g6a8b55ed4056
  318. [ 11.532696] Backport generated by backports.git v5.7-rc3-1-0-gc0c7d2bb
  319. [ 11.544719] xt_time: kernel timezone is -0000
  320. [ 11.571900] PPP generic driver version 2.4.2
  321. [ 11.572360] NET: Registered protocol family 24
  322. [ 11.588689] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46.
  323. [ 11.589120] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
  324. [ 11.595810] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  325. [ 12.020781] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
  326. [ 12.020820] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  327. [ 12.032640] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 46b728ef
  328. [ 14.383364] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
  329. [ 20.275772] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
  330. [ 20.276997] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  331. [ 20.281277] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
  332. [ 20.364470] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  333. [ 20.365344] ath10k_pci 0000:01:00.0: wmi print 'free: 84856 iram: 13140 sram: 11224'
  334. [ 20.653557] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
  335. [ 20.752027] ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46.
  336. [ 20.752882] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
  337. [ 20.759143] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  338. [ 21.201300] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
  339. [ 21.201339] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  340. [ 21.212698] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 46b728ef
  341. [ 23.538833] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
  342. [ 29.383233] ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
  343. [ 29.384580] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  344. [ 29.388649] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
  345. [ 29.473869] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  346. [ 29.474744] ath10k_pci 0001:01:00.0: wmi print 'free: 84856 iram: 13140 sram: 11224'
  347. [ 29.774195] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
  348. [ 29.884529] kmodloader: done loading kernel modules from /etc/modules.d/*
  349. [ 35.088273] dwmac1000: Master AXI performs any burst length
  350. [ 35.088303] ipq806x-gmac-dwmac 37200000.ethernet eth1: No Safety Features support found
  351. [ 35.092764] ipq806x-gmac-dwmac 37200000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
  352. [ 35.100744] ipq806x-gmac-dwmac 37200000.ethernet eth1: registered PTP clock
  353. [ 35.109737] ipq806x-gmac-dwmac 37200000.ethernet eth1: configuring for fixed/sgmii link mode
  354. [ 35.116744] ipq806x-gmac-dwmac 37200000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
  355. [ 35.129710] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  356. [ 35.136687] br-lan: port 1(eth1.1) entered blocking state
  357. [ 35.140042] br-lan: port 1(eth1.1) entered disabled state
  358. [ 35.145873] device eth1.1 entered promiscuous mode
  359. [ 35.150977] device eth1 entered promiscuous mode
  360. [ 35.157119] br-lan: port 1(eth1.1) entered blocking state
  361. [ 35.160457] br-lan: port 1(eth1.1) entered forwarding state
  362. [ 35.171570] dwmac1000: Master AXI performs any burst length
  363. [ 35.171601] ipq806x-gmac-dwmac 37000000.ethernet eth0: No Safety Features support found
  364. [ 35.176683] ipq806x-gmac-dwmac 37000000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  365. [ 35.184864] ipq806x-gmac-dwmac 37000000.ethernet eth0: registered PTP clock
  366. [ 35.193784] ipq806x-gmac-dwmac 37000000.ethernet eth0: configuring for fixed/rgmii link mode
  367. [ 35.201062] ipq806x-gmac-dwmac 37000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  368. [ 35.210012] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  369. [ 36.174094] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  370.  
  371.  
  372.  
  373. BusyBox v1.31.1 () built-in shell (ash)
  374.  
  375. _______ ________ __
  376. | |.-----.-----.-----.| | | |.----.| |_
  377. | - || _ | -__| || | | || _|| _|
  378. |_______|| __|_____|__|__||________||__| |____|
  379. |__| W I R E L E S S F R E E D O M
  380. -----------------------------------------------------
  381. OpenWrt SNAPSHOT, r13657-32c8ab944e
  382. -----------------------------------------------------
  383. === WARNING! =====================================
  384. There is no root password defined on this device!
  385. Use the "passwd" command to set up a new password
  386. in order to prevent unauthorized SSH logins.
  387. --------------------------------------------------
  388. root@OpenWrt:/#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!