daily pastebin goal
17%
SHARE
TWEET

Untitled

laxlo Sep 30th, 2018 96 in 3 days
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.191053] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  2. [    0.191323] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  3. [    0.191591] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  4. [    0.191861] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
  5. [    0.194234] ACPI: EC: interrupt unblocked
  6. [    0.194283] ACPI: EC: event unblocked
  7. [    0.194380] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  8. [    0.194385] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
  9. [    0.195008] SCSI subsystem initialized
  10. [    0.195115] libata version 3.00 loaded.
  11. [    0.195115] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  12. [    0.195115] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  13. [    0.195115] pci 0000:00:02.0: vgaarb: bridge control possible
  14. [    0.195115] vgaarb: loaded
  15. [    0.195115] ACPI: bus type USB registered
  16. [    0.195115] usbcore: registered new interface driver usbfs
  17. [    0.195115] usbcore: registered new interface driver hub
  18. [    0.195115] usbcore: registered new device driver usb
  19. [    0.195115] EDAC MC: Ver: 3.0.0
  20. [    0.195115] Registered efivars operations
  21. [    0.251282] PCI: Using ACPI for IRQ routing
  22. [    0.255450] PCI: pci_cache_line_size set to 64 bytes
  23. [    0.255647] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
  24. [    0.255651] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
  25. [    0.255653] e820: reserve RAM buffer [mem 0x68b8d000-0x6bffffff]
  26. [    0.255656] e820: reserve RAM buffer [mem 0x7822f000-0x7bffffff]
  27. [    0.255659] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
  28. [    0.256254] NetLabel: Initializing
  29. [    0.256254] NetLabel:  domain hash size = 128
  30. [    0.256254] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
  31. [    0.256254] NetLabel:  unlabeled traffic allowed by default
  32. [    0.257160] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  33. [    0.257179] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
  34. [    0.260015] clocksource: Switched to clocksource hpet
  35. [    0.294336] VFS: Disk quotas dquot_6.6.0
  36. [    0.294380] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  37. [    0.294671] AppArmor: AppArmor Filesystem Enabled
  38. [    0.294745] pnp: PnP ACPI init
  39. [    0.294941] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:13.2 BAR 13 [io  0x1000-0x1fff]
  40. [    0.295018] system 00:00: [io  0x0680-0x069f] has been reserved
  41. [    0.295024] system 00:00: [io  0x0400-0x047f] could not be reserved
  42. [    0.295028] system 00:00: [io  0x0500-0x05fe] has been reserved
  43. [    0.295033] system 00:00: [io  0x0600-0x061f] has been reserved
  44. [    0.295048] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  45. [    0.295213] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
  46. [    0.296157] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
  47. [    0.296163] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
  48. [    0.296167] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
  49. [    0.296172] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
  50. [    0.296176] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
  51. [    0.296180] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
  52. [    0.296184] system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
  53. [    0.296189] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
  54. [    0.296193] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
  55. [    0.296207] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  56. [    0.296946] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  57. [    0.297574] pnp: PnP ACPI: found 4 devices
  58. [    0.309599] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  59. [    0.309612] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
  60. [    0.309660] pci 0000:00:13.0: PCI bridge to [bus 01]
  61. [    0.309684] pci 0000:02:00.0: BAR 6: assigned [mem 0x91310000-0x9131ffff pref]
  62. [    0.309690] pci 0000:00:13.2: PCI bridge to [bus 02]
  63. [    0.309695] pci 0000:00:13.2:   bridge window [io  0x1000-0x1fff]
  64. [    0.309702] pci 0000:00:13.2:   bridge window [mem 0x91300000-0x913fffff]
  65. [    0.309713] pci 0000:00:13.3: PCI bridge to [bus 03]
  66. [    0.309721] pci 0000:00:13.3:   bridge window [mem 0x91000000-0x911fffff]
  67. [    0.309733] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
  68. [    0.309737] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
  69. [    0.309741] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
  70. [    0.309745] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
  71. [    0.309749] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window]
  72. [    0.309754] pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window]
  73. [    0.309758] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window]
  74. [    0.309762] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window]
  75. [    0.309766] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
  76. [    0.309770] pci_bus 0000:02: resource 1 [mem 0x91300000-0x913fffff]
  77. [    0.309774] pci_bus 0000:03: resource 1 [mem 0x91000000-0x911fffff]
  78. [    0.310088] NET: Registered protocol family 2
  79. [    0.310527] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  80. [    0.310792] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  81. [    0.311144] TCP: Hash tables configured (established 32768 bind 32768)
  82. [    0.311251] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  83. [    0.311329] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  84. [    0.311505] NET: Registered protocol family 1
  85. [    0.311544] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  86. [    1.532478] pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
  87. [    1.532848] PCI: CLS 64 bytes, default 64
  88. [    1.532959] Unpacking initramfs...
  89. [    3.668436] Freeing initrd memory: 55284K
  90. [    3.668601] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  91. [    3.668609] software IO TLB [mem 0x71ea0000-0x75ea0000] (64MB) mapped at [        (ptrval)-        (ptrval)]
  92. [    3.668716] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
  93. [    3.668768] clocksource: Switched to clocksource tsc
  94. [    3.668980] Scanning for low memory corruption every 60 seconds
  95. [    3.670519] Initialise system trusted keyrings
  96. [    3.670551] Key type blacklist registered
  97. [    3.670619] workingset: timestamp_bits=36 max_order=20 bucket_order=0
  98. [    3.673829] zbud: loaded
  99. [    3.675193] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  100. [    3.675596] fuse init (API version 7.26)
  101. [    3.679453] Key type asymmetric registered
  102. [    3.679456] Asymmetric key parser 'x509' registered
  103. [    3.679559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  104. [    3.679659] io scheduler noop registered
  105. [    3.679661] io scheduler deadline registered
  106. [    3.679787] io scheduler cfq registered (default)
  107. [    3.681679] pcieport 0000:00:13.0: Signaling PME with IRQ 122
  108. [    3.681740] pcieport 0000:00:13.2: Signaling PME with IRQ 123
  109. [    3.681790] pcieport 0000:00:13.3: Signaling PME with IRQ 124
  110. [    3.681991] efifb: probing for efifb
  111. [    3.682034] efifb: framebuffer at 0x80000000, using 8128k, total 8128k
  112. [    3.682037] efifb: mode is 1920x1080x32, linelength=7680, pages=1
  113. [    3.682038] efifb: scrolling: redraw
  114. [    3.682042] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  115. [    3.682310] Console: switching to colour frame buffer device 240x67
  116. [    3.682391] fb0: EFI VGA frame buffer device
  117. [    3.682424] intel_idle: MWAIT substates: 0x11242020
  118. [    3.682426] intel_idle: v0.4.1 model 0x5C
  119. [    3.682934] intel_idle: lapic_timer_reliable_states 0xffffffff
  120. [    3.683383] ACPI: AC Adapter [ACAD] (on-line)
  121. [    3.683521] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  122. [    3.683550] ACPI: Power Button [PWRB]
  123. [    3.683638] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
  124. [    3.683655] ACPI: Sleep Button [SLPB]
  125. [    3.683747] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
  126. [    3.683767] ACPI: Lid Switch [LID0]
  127. [    3.688871] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  128. [    3.689052] thermal LNXTHERM:00: registered as thermal_zone0
  129. [    3.689055] ACPI: Thermal Zone [TZ01] (25 C)
  130. [    3.689463] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  131. [    3.692623] ACPI: Battery Slot [BAT1] (battery present)
  132. [    3.695261] Linux agpgart interface v0.103
  133. [    3.699517] loop: module loaded
  134. [    3.699966] libphy: Fixed MDIO Bus: probed
  135. [    3.699969] tun: Universal TUN/TAP device driver, 1.6
  136. [    3.700212] PPP generic driver version 2.4.2
  137. [    3.700370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  138. [    3.700377] ehci-pci: EHCI PCI platform driver
  139. [    3.700400] ehci-platform: EHCI generic platform driver
  140. [    3.700423] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  141. [    3.700427] ohci-pci: OHCI PCI platform driver
  142. [    3.700450] ohci-platform: OHCI generic platform driver
  143. [    3.700466] uhci_hcd: USB Universal Host Controller Interface driver
  144. [    3.701345] xhci_hcd 0000:00:15.0: xHCI Host Controller
  145. [    3.701358] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
  146. [    3.702494] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
  147. [    3.702504] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
  148. [    3.702823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  149. [    3.702827] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  150. [    3.702831] usb usb1: Product: xHCI Host Controller
  151. [    3.702835] usb usb1: Manufacturer: Linux 4.15.0-34-generic xhci-hcd
  152. [    3.702838] usb usb1: SerialNumber: 0000:00:15.0
  153. [    3.703180] hub 1-0:1.0: USB hub found
  154. [    3.703204] hub 1-0:1.0: 8 ports detected
  155. [    3.704799] xhci_hcd 0000:00:15.0: xHCI Host Controller
  156. [    3.704810] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
  157. [    3.704819] xhci_hcd 0000:00:15.0: Host supports USB 3.0  SuperSpeed
  158. [    3.704898] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  159. [    3.704902] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  160. [    3.704905] usb usb2: Product: xHCI Host Controller
  161. [    3.704909] usb usb2: Manufacturer: Linux 4.15.0-34-generic xhci-hcd
  162. [    3.704912] usb usb2: SerialNumber: 0000:00:15.0
  163. [    3.705202] hub 2-0:1.0: USB hub found
  164. [    3.705229] hub 2-0:1.0: 7 ports detected
  165. [    3.705792] usb: port power management may be unreliable
  166. [    3.706740] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  167. [    3.706743] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  168. [    3.708390] serio: i8042 KBD port at 0x60,0x64 irq 1
  169. [    3.708739] mousedev: PS/2 mouse device common for all mice
  170. [    3.709407] rtc_cmos 00:03: RTC can wake from S4
  171. [    3.709958] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  172. [    3.710083] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  173. [    3.710099] i2c /dev entries driver
  174. [    3.710243] device-mapper: uevent: version 1.0.3
  175. [    3.710460] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
  176. [    3.710475] intel_pstate: Intel P-state driver initializing
  177. [    3.711183] ledtrig-cpu: registered to indicate activity on CPUs
  178. [    3.711214] EFI Variables Facility v0.08 2004-May-17
  179. [    3.717351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  180. [    3.760960] NET: Registered protocol family 10
  181. [    3.766886] Segment Routing with IPv6
  182. [    3.766922] NET: Registered protocol family 17
  183. [    3.766992] Key type dns_resolver registered
  184. [    3.767805] intel_rdt: Intel RDT L2 allocation detected
  185. [    3.767830] RAS: Correctable Errors collector initialized.
  186. [    3.767956] microcode: sig=0x506c9, pf=0x1, revision=0x32
  187. [    3.768216] microcode: Microcode Update Driver: v2.2.
  188. [    3.768244] sched_clock: Marking stable (3768200003, 0)->(3748020651, 20179352)
  189. [    3.768798] registered taskstats version 1
  190. [    3.768812] Loading compiled-in X.509 certificates
  191. [    3.772713] Loaded X.509 cert 'Build time autogenerated kernel key: 197c80222fd2638086c51a9b9e4961ca73d6ea07'
  192. [    3.841200] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
  193. [    3.841235] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
  194. [    3.841268] Loaded UEFI:db cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' linked to secondary sys keyring
  195. [    3.845333] Loaded UEFI:db cert 'LINPUS: 967f81f2f4f5ac0f24fca5e42982e4ad1e56ddff' linked to secondary sys keyring
  196. [    3.850057] Loaded UEFI:db cert 'Quanta NB4: 073d6a4c306ea5b9499e861c7ba55cde' linked to secondary sys keyring
  197. [    3.850589] Couldn't get size: 0x800000000000000e
  198. [    3.850592] MODSIGN: Couldn't get UEFI MokListRT
  199. [    3.852249] zswap: loaded using pool lzo/zbud
  200. [    3.859401] Key type big_key registered
  201. [    3.859408] Key type trusted registered
  202. [    3.863249] Key type encrypted registered
  203. [    3.863256] AppArmor: AppArmor sha1 policy hashing enabled
  204. [    3.863261] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
  205. [    3.863273] ima: Allocated hash algorithm: sha1
  206. [    3.863301] evm: HMAC attrs: 0x1
  207. [    3.863848]   Magic number: 2:692:922
  208. [    3.864198] rtc_cmos 00:03: setting system clock to 2018-09-30 05:55:13 UTC (1538286913)
  209. [    3.864467] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  210. [    3.864469] EDD information not available.
  211. [    3.867516] Freeing unused kernel memory: 2408K
  212. [    3.892234] Write protecting the kernel read-only data: 20480k
  213. [    3.893460] Freeing unused kernel memory: 2008K
  214. [    3.899232] Freeing unused kernel memory: 1900K
  215. [    3.909736] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  216. [    4.030521] hidraw: raw HID events driver (C) Jiri Kosina
  217. [    4.037091] ahci 0000:00:12.0: version 3.0
  218. [    4.037402] ahci 0000:00:12.0: SSS flag set, parallel bus scan disabled
  219. [    4.043837] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  220. [    4.043853] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
  221. [    4.047499] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  222. [    4.047504] ahci 0000:00:12.0: flags: 64bit ncq sntf stag pm clo only pmp pio slum part deso sadm sds apst
  223. [    4.048189] scsi host0: ahci
  224. [    4.048764] scsi host1: ahci
  225. [    4.048837] ata1: SATA max UDMA/133 abar m2048@0x91419000 port 0x91419100 irq 127
  226. [    4.048840] ata2: SATA max UDMA/133 abar m2048@0x91419000 port 0x91419180 irq 127
  227. [    4.057301] r8169 0000:02:00.1 eth0: RTL8411 at 0x        (ptrval), a8:1e:84:89:0c:37, XID 1c800800 IRQ 128
  228. [    4.057305] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  229. [    4.082698] r8169 0000:02:00.1 enp2s0f1: renamed from eth0
  230. [    4.093376] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  231. [    4.105857] [drm] Memory usable by graphics device = 4096M
  232. [    4.105862] checking generic (80000000 7f0000) vs hw (80000000 10000000)
  233. [    4.105864] fb: switching to inteldrmfb from EFI VGA
  234. [    4.105901] Console: switching to colour dummy device 80x25
  235. [    4.106195] [drm] Replacing VGA console driver
  236. [    4.106553] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  237. [    4.106555] [drm] Driver supports precise vblank timestamp query.
  238. [    4.106713] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
  239. [    4.107205] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
  240. [    4.126934] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
  241. [    4.128957] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  242. [    4.129393] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
  243. [    4.148176] fbcon: inteldrmfb (fb0) is primary device
  244. [    4.148258] Console: switching to colour frame buffer device 240x67
  245. [    4.148301] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  246. [    4.242455] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  247. [    4.242460] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  248. [    4.242462] usb 1-1: Product: USB2.0 Hub
  249. [    4.243783] hub 1-1:1.0: USB hub found
  250. [    4.244188] hub 1-1:1.0: 4 ports detected
  251. [    4.372210] usb 1-4: new full-speed USB device number 3 using xhci_hcd
  252. [    4.520220] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  253. [    4.520919] ata1.00: ATA-9: WDC WDS240G2G0A-00JH30, UF360000, max UDMA/133
  254. [    4.520923] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 31/32)
  255. [    4.523519] usb 1-4: New USB device found, idVendor=062a, idProduct=4101
  256. [    4.523523] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  257. [    4.523526] usb 1-4: Product: 2.4G Keyboard Mouse
  258. [    4.523529] usb 1-4: Manufacturer: MOSART Semi.
  259. [    4.527024] ata1.00: configured for UDMA/133
  260. [    4.527434] scsi 0:0:0:0: Direct-Access     ATA      WDC WDS240G2G0A- 0000 PQ: 0 ANSI: 5
  261. [    4.527989] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
  262. [    4.528018] sd 0:0:0:0: [sda] Write Protect is off
  263. [    4.528020] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  264. [    4.528042] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  265. [    4.528056] sd 0:0:0:0: Attached scsi generic sg0 type 0
  266. [    4.531471]  sda: sda1 sda2
  267. [    4.532299] sd 0:0:0:0: [sda] Attached SCSI disk
  268. [    4.600220] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
  269. [    4.741570] usb 1-1.4: New USB device found, idVendor=04e8, idProduct=61b6
  270. [    4.741573] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  271. [    4.741575] usb 1-1.4: Product: Samsung M3 Portable
  272. [    4.741577] usb 1-1.4: Manufacturer: Samsung M3 Portable
  273. [    4.741578] usb 1-1.4: SerialNumber: 91E27E010F00014E
  274. [    4.844818] ata2: SATA link down (SStatus 4 SControl 300)
  275. [    4.872037] usb 1-5: new full-speed USB device number 5 using xhci_hcd
  276. [    5.022395] usb 1-5: New USB device found, idVendor=04ca, idProduct=3015
  277. [    5.022398] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  278. [    5.148252] usb 1-7: new high-speed USB device number 6 using xhci_hcd
  279. [    5.315245] usb 1-7: New USB device found, idVendor=04f2, idProduct=b5e0
  280. [    5.315249] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  281. [    5.315252] usb 1-7: Product: VGA WebCam
  282. [    5.315255] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
  283. [    5.315257] usb 1-7: SerialNumber: 0x0001
  284. [    5.326226] usbcore: registered new interface driver usbhid
  285. [    5.326228] usbhid: USB HID core driver
  286. [    5.328537] usbcore: registered new interface driver usb-storage
  287. [    5.329676] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4:1.0/0003:062A:4101.0001/input/input5
  288. [    5.331296] scsi host2: uas
  289. [    5.331422] usbcore: registered new interface driver uas
  290. [    5.331929] scsi 2:0:0:0: Direct-Access     Samsung  M3 Portable      1306 PQ: 0 ANSI: 6
  291. [    5.332480] random: fast init done
  292. [    5.332588] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  293. [    5.332610] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  294. [    5.332615] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  295. [    5.332825] sd 2:0:0:0: Attached scsi generic sg1 type 0
  296. [    5.333314] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  297. [    5.333316] sd 2:0:0:0: [sdb] 4096-byte physical blocks
  298. [    5.333474] sd 2:0:0:0: [sdb] Write Protect is off
  299. [    5.333476] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
  300. [    5.333767] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  301. [    5.388935] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:15.0-4/input0
  302. [    5.389319] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4:1.1/0003:062A:4101.0002/input/input6
  303. [    5.449637] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:15.0-4/input1
  304. [    5.647073]  sdb: sdb1
  305. [    5.648792] sd 2:0:0:0: [sdb] Attached SCSI disk
  306. [    5.820594] [drm] RC6 on
  307. [    6.328939] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  308. [    6.643765] ip_tables: (C) 2000-2006 Netfilter Core Team
  309. [    6.853994] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  310. [    6.872640] systemd[1]: Detected architecture x86-64.
  311. [    6.876698] systemd[1]: Set hostname to <lazlo-Aspire>.
  312. [    7.186758] systemd[1]: Reached target Remote File Systems.
  313. [    7.187159] systemd[1]: Created slice System Slice.
  314. [    7.187371] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  315. [    7.187569] systemd[1]: Listening on Journal Audit Socket.
  316. [    7.187592] systemd[1]: Reached target User and Group Name Lookups.
  317. [    7.187701] systemd[1]: Listening on Journal Socket (/dev/log).
  318. [    7.187804] systemd[1]: Listening on udev Control Socket.
  319. [    7.245919] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
  320. [    7.268921] lp: driver loaded but no devices found
  321. [    7.281853] ppdev: user-space parallel port driver
  322. [    7.314226] systemd-journald[342]: Received request to flush runtime journal from PID 1
  323. [    7.320881] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  324. [    7.373857] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
  325. [    7.379396] ip6_tables: (C) 2000-2006 Netfilter Core Team
  326. [    7.961947] random: crng init done
  327. [    7.961950] random: 7 urandom warning(s) missed due to ratelimiting
  328. [    7.963351] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  329. [    8.015056] idma64 idma64.0: Found Intel integrated DMA 64-bit
  330. [    8.017807] i2c_hid i2c-SYNA7DAB:00: i2c-SYNA7DAB:00 supply vdd not found, using dummy regulator
  331. [    8.030200] acer_wmi: Acer Laptop ACPI-WMI Extras
  332. [    8.030238] acer_wmi: Function bitmap for Communication Button: 0x801
  333. [    8.030745] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  334. [    8.031335] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  335. [    8.058635] input: Acer WMI hotkeys as /devices/virtual/input/input7
  336. [    8.100115] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  337. [    8.109690] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
  338. [    8.109693] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
  339. [    8.109694] RAPL PMU: hw unit of domain package 2^-14 Joules
  340. [    8.109695] RAPL PMU: hw unit of domain dram 2^-14 Joules
  341. [    8.109695] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
  342. [    8.155751] SSE version of gcm_enc/dec engaged.
  343. [    8.231272] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  344. [    8.340599] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  345. [    8.340602] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  346. [    8.340605] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
  347. [    8.340606] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
  348. [    8.340607] snd_hda_codec_realtek hdaudioC0D0:    inputs:
  349. [    8.340610] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
  350. [    8.340612] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
  351. [    8.358359] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
  352. [    8.358402] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
  353. [    8.358443] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0
  354. [    8.358484] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
  355. [    8.358530] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
  356. [    8.358571] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
  357. [    8.358621] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
  358. [    8.358702] EDAC pnd2: b_cr_slice_channel_hash=80000d9480001248 ret=0
  359. [    8.358748] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
  360. [    8.358789] EDAC pnd2: d_cr_drp0=0a000c015 ret=0
  361. [    8.358830] EDAC pnd2: d_cr_drp0=000000000 ret=2
  362. [    8.358870] EDAC pnd2: d_cr_drp0=0a000c015 ret=0
  363. [    8.358910] EDAC pnd2: d_cr_drp0=000000000 ret=2
  364. [    8.358912] EDAC pnd2: ECC disabled on channel 0
  365. [    8.358912] EDAC pnd2: ECC disabled on channel 2
  366. [    8.358913] EDAC pnd2: Failed to register device with error -22.
  367. [    8.400837] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
  368. [    8.400883] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
  369. [    8.414281] intel_telemetry_core Init
  370. [    8.418537] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
  371. [    8.422702] input: SYNA7DAB:00 06CB:7DB7 Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_designware.0/i2c-4/i2c-SYNA7DAB:00/0018:06CB:7DB7.0003/input/input9
  372. [    8.422856] hid-multitouch 0018:06CB:7DB7.0003: input,hidraw2: I2C HID v1.00 Mouse [SYNA7DAB:00 06CB:7DB7] on i2c-SYNA7DAB:00
  373. [    8.430350] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6
  374. [    8.430355] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
  375. [    8.431017] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
  376. [    8.452359] intel_rapl: Found RAPL domain package
  377. [    8.452362] intel_rapl: Found RAPL domain core
  378. [    8.452364] intel_rapl: Found RAPL domain uncore
  379. [    8.452366] intel_rapl: Found RAPL domain dram
  380. [    8.497657] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
  381. [    9.115255] ath10k_pci 0000:03:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
  382. [    9.122980] ath: EEPROM regdomain: 0x69
  383. [    9.122983] ath: EEPROM indicates we should expect a direct regpair map
  384. [    9.122984] ath: Country alpha2 being used: 00
  385. [    9.122985] ath: Regpair used: 0x69
  386. [    9.139517] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
  387. [    9.153331] Bluetooth: Core ver 2.22
  388. [    9.153356] NET: Registered protocol family 31
  389. [    9.153357] Bluetooth: HCI device and connection manager initialized
  390. [    9.153362] Bluetooth: HCI socket layer initialized
  391. [    9.153365] Bluetooth: L2CAP socket layer initialized
  392. [    9.153378] Bluetooth: SCO socket layer initialized
  393. [    9.161162] media: Linux media interface: v0.10
  394. [    9.174393] Linux video capture interface: v2.00
  395. [    9.304624] usbcore: registered new interface driver btusb
  396. [    9.328758] uvcvideo: Found UVC 1.00 device VGA WebCam (04f2:b5e0)
  397. [    9.329634] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
  398. [    9.329638] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
  399. [    9.329639] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
  400. [    9.329730] input: VGA WebCam: VGA WebCam as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/input/input14
  401. [    9.329821] usbcore: registered new interface driver uvcvideo
  402. [    9.329822] USB Video Class driver (1.1.1)
  403. [    9.977987] dell_smbios: Unable to run on non-Dell system
  404. [    9.990401] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
  405. [    9.990404] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
  406. [   10.024904] snd_hda_codec_realtek hdaudioC0D0: Failed to find dell wmi symbol dell_micmute_led_set
  407. [   10.084482] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
  408. [   10.084567] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16
  409. [   10.084641] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17
  410. [   10.084716] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18
  411. [   10.086803] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19
  412. [   10.086914] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input20
  413. [   10.109845] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
  414. [   10.243136] audit: type=1400 audit(1538286919.871:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=832 comm="apparmor_parser"
  415. [   10.245192] audit: type=1400 audit(1538286919.875:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=830 comm="apparmor_parser"
  416. [   10.245199] audit: type=1400 audit(1538286919.875:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=830 comm="apparmor_parser"
  417. [   10.245202] audit: type=1400 audit(1538286919.875:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=830 comm="apparmor_parser"
  418. [   10.245204] audit: type=1400 audit(1538286919.875:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=830 comm="apparmor_parser"
  419. [   10.245355] audit: type=1400 audit(1538286919.875:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=829 comm="apparmor_parser"
  420. [   10.245362] audit: type=1400 audit(1538286919.875:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=829 comm="apparmor_parser"
  421. [   10.245434] audit: type=1400 audit(1538286919.875:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=833 comm="apparmor_parser"
  422. [   10.245438] audit: type=1400 audit(1538286919.875:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=833 comm="apparmor_parser"
  423. [   10.245440] audit: type=1400 audit(1538286919.875:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=833 comm="apparmor_parser"
  424. [   10.457473] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  425. [   10.457476] Bluetooth: BNEP filters: protocol multicast
  426. [   10.457483] Bluetooth: BNEP socket layer initialized
  427. [   11.104574] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
  428. [   11.174015] r8169 0000:02:00.1 enp2s0f1: link down
  429. [   11.174127] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
  430. [   11.185640] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  431. [   12.102591] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  432. [   12.247731] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  433. [   37.071397] Bluetooth: RFCOMM TTY layer initialized
  434. [   37.071407] Bluetooth: RFCOMM socket layer initialized
  435. [   37.071419] Bluetooth: RFCOMM ver 1.11
  436. [ 1117.676894] wlp3s0: authenticate with a0:e4:53:b7:e5:64
  437. [ 1117.709084] wlp3s0: send auth to a0:e4:53:b7:e5:64 (try 1/3)
  438. [ 1117.710837] wlp3s0: authenticated
  439. [ 1117.712158] wlp3s0: associate with a0:e4:53:b7:e5:64 (try 1/3)
  440. [ 1117.722704] wlp3s0: RX AssocResp from a0:e4:53:b7:e5:64 (capab=0x8431 status=0 aid=1)
  441. [ 1117.727211] wlp3s0: associated
  442. [ 1117.753129] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
  443. lazlo@lazlo-Aspire:~$
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top