API tools faq
paste
simhavcs

dmesg_5.4_audio

simhavcs
Jan 27th, 2020
168
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 51.46 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.14.96-ifc6640-arm64-dev (inforce@inforce-server-Z9PE-D8-WS) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02)) #1 SMP PREEMPT Fri Jan 10 12:06:04 IST 2020
  3. [ 0.000000] Boot CPU: AArch64 Processor [511f2112]
  4. [ 0.000000] Machine model: Qualcomm Technologies, Inc. DB820c
  5. [ 0.000000] efi: Getting EFI parameters from FDT:
  6. [ 0.000000] efi: UEFI not found.
  7. [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB
  8. [ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
  9. [ 0.000000] cma: Reserved 16 MiB at 0x00000000ff000000
  10. [ 0.000000] NUMA: No NUMA configuration found
  11. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000017e44ffff]
  12. [ 0.000000] NUMA: NODE_DATA [mem 0x17e3e2a00-0x17e3e44ff]
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
  15. [ 0.000000] Normal [mem 0x0000000100000000-0x000000017e44ffff]
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
  19. [ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff]
  20. [ 0.000000] node 0: [mem 0x00000000a2000000-0x000000017e44ffff]
  21. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e44ffff]
  22. [ 0.000000] On node 0 totalpages: 992080
  23. [ 0.000000] DMA zone: 7420 pages used for memmap
  24. [ 0.000000] DMA zone: 0 pages reserved
  25. [ 0.000000] DMA zone: 474880 pages, LIFO batch:31
  26. [ 0.000000] Normal zone: 8082 pages used for memmap
  27. [ 0.000000] Normal zone: 517200 pages, LIFO batch:31
  28. [ 0.000000] psci: probing for conduit method from DT.
  29. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  30. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  31. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  32. [ 0.000000] psci: SMC Calling Convention v1.0
  33. [ 0.000000] percpu: Embedded 24 pages/cpu @ffff8000fe37d000 s57496 r8192 d32616 u98304
  34. [ 0.000000] pcpu-alloc: s57496 r8192 d32616 u98304 alloc=24*4096
  35. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  36. [ 0.000000] Detected PIPT I-cache on CPU0
  37. [ 0.000000] CPU features: enabling workaround for Qualcomm Technologies Kryo erratum 1003
  38. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 976578
  39. [ 0.000000] Policy zone: Normal
  40. [ 0.000000] Kernel command line: root=PARTLABEL=rootfs console=tty0 console=ttyMSM0,115200n8 loglevel=10 log_buf_len=4M androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=94a5c9b7 androidboot.baseband=apq mdss_mdp.panel=0
  41. [ 0.000000] log_buf_len: 4194304 bytes
  42. [ 0.000000] early log buf free: 128232(97%)
  43. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  44. [ 0.000000] software IO TLB: mapped [mem 0xfafff000-0xfefff000] (64MB)
  45. [ 0.000000] Memory: 3791216K/3968320K available (10492K kernel code, 1564K rwdata, 4888K rodata, 1216K init, 391K bss, 160720K reserved, 16384K cma-reserved)
  46. [ 0.000000] Virtual kernel memory layout:
  47. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  48. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  49. [ 0.000000] .text : 0xffff000008080000 - 0xffff000008ac0000 ( 10496 KB)
  50. [ 0.000000] .rodata : 0xffff000008ac0000 - 0xffff000008f90000 ( 4928 KB)
  51. [ 0.000000] .init : 0xffff000008f90000 - 0xffff0000090c0000 ( 1216 KB)
  52. [ 0.000000] .data : 0xffff0000090c0000 - 0xffff000009247200 ( 1565 KB)
  53. [ 0.000000] .bss : 0xffff000009247200 - 0xffff0000092a8e40 ( 392 KB)
  54. [ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB)
  55. [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  56. [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  57. [ 0.000000] 0xffff7e0000000000 - 0xffff7e0003f91400 ( 63 MB actual)
  58. [ 0.000000] memory : 0xffff800000000000 - 0xffff8000fe450000 ( 4068 MB)
  59. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  60. [ 0.000000] Preemptible hierarchical RCU implementation.
  61. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  62. [ 0.000000] Tasks RCU enabled.
  63. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  64. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  65. [ 0.000000] GICv3: VLPI support, no direct LPI support
  66. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
  67. [ 0.000000] GICv2m: range[mem 0x09bd0000-0x09bd0fff], SPI[544:639]
  68. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  69. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  70. [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  71. [ 0.000293] Console: colour dummy device 80x25
  72. [ 0.000879] console [tty0] enabled
  73. [ 0.000934] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
  74. [ 0.000957] pid_max: default: 32768 minimum: 301
  75. [ 0.001024] Security Framework initialized
  76. [ 0.001774] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  77. [ 0.002148] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  78. [ 0.002189] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  79. [ 0.002213] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  80. [ 0.015739] ASID allocator initialised with 32768 entries
  81. [ 0.023738] Hierarchical SRCU implementation.
  82. [ 0.034010] EFI services will not be available.
  83. [ 0.039806] smp: Bringing up secondary CPUs ...
  84. [ 0.068329] Detected PIPT I-cache on CPU1
  85. [ 0.068355] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
  86. [ 0.068387] CPU1: Booted secondary processor [511f2112]
  87. [ 0.098999] Detected PIPT I-cache on CPU2
  88. [ 0.099832] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
  89. [ 0.100581] CPU2: Booted secondary processor [511f2052]
  90. [ 0.134780] Detected PIPT I-cache on CPU3
  91. [ 0.135637] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
  92. [ 0.136321] CPU3: Booted secondary processor [511f2052]
  93. [ 0.139655] smp: Brought up 1 node, 4 CPUs
  94. [ 0.139745] SMP: Total of 4 processors activated.
  95. [ 0.139762] CPU features: detected feature: GIC system register CPU interface
  96. [ 0.139776] CPU features: detected feature: 32-bit EL0 Support
  97. [ 0.139791] CPU features: detected feature: Kernel page table isolation (KPTI)
  98. [ 0.202744] CPU: All CPU(s) started at EL1
  99. [ 0.203672] alternatives: patching kernel code
  100. [ 0.206228] devtmpfs: initialized
  101. [ 0.214591] random: get_random_u32 called from bucket_table_alloc+0xf8/0x280 with crng_init=0
  102. [ 0.215149] Registered cp15_barrier emulation handler
  103. [ 0.215257] Registered setend emulation handler
  104. [ 0.215533] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  105. [ 0.215613] futex hash table entries: 1024 (order: 5, 131072 bytes)
  106. [ 0.215941] pinctrl core: initialized pinctrl subsystem
  107. [ 0.217507] DMI not present or invalid.
  108. [ 0.217811] NET: Registered protocol family 16
  109. [ 0.222091] cpuidle: using governor menu
  110. [ 0.222954] vdso: 2 pages (1 code @ ffff000008ac6000, 1 data @ ffff0000090c5000)
  111. [ 0.223097] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
  112. [ 0.226225] DMA: preallocated 256 KiB pool for atomic allocations
  113. [ 0.226557] Serial: AMBA PL011 UART driver
  114. [ 0.267353] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  115. [ 0.268705] ACPI: Interpreter disabled.
  116. [ 0.269348] reg-fixed-voltage soc:wlan-en-1-8v: could not find pctldev for node /soc/qcom,spmi@400f000/pmic@0/gpios@c000/wlan_en_gpios, deferring probe
  117. [ 0.270836] vgaarb: loaded
  118. [ 0.271076] SCSI subsystem initialized
  119. [ 0.274044] libata version 3.00 loaded.
  120. [ 0.274258] usbcore: registered new interface driver usbfs
  121. [ 0.274308] usbcore: registered new interface driver hub
  122. [ 0.274386] usbcore: registered new device driver usb
  123. [ 0.275375] pps_core: LinuxPPS API ver. 1 registered
  124. [ 0.275394] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  125. [ 0.275418] PTP clock support registered
  126. [ 0.275588] EDAC MC: Ver: 3.0.0
  127. [ 0.277984] dmi: Firmware registration failed.
  128. [ 0.282053] Advanced Linux Sound Architecture Driver Initialized.
  129. [ 0.284023] clocksource: Switched to clocksource arch_sys_counter
  130. [ 0.284135] VFS: Disk quotas dquot_6.6.0
  131. [ 0.284190] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  132. [ 0.284365] pnp: PnP ACPI: disabled
  133. [ 0.294858] s1: supplied by regulator-dummy
  134. [ 0.295043] s2: supplied by regulator-dummy
  135. [ 0.295195] s3: supplied by regulator-dummy
  136. [ 0.295242] s3: Bringing 0uV into 1300000-1300000uV
  137. [ 0.295526] s4: supplied by regulator-dummy
  138. [ 0.295566] s4: Bringing 0uV into 1800000-1800000uV
  139. [ 0.295965] s5: supplied by regulator-dummy
  140. [ 0.296004] s5: Bringing 0uV into 2150000-2150000uV
  141. [ 0.296257] s6: supplied by regulator-dummy
  142. [ 0.296414] s7: supplied by regulator-dummy
  143. [ 0.296448] s7: Bringing 0uV into 800000-800000uV
  144. [ 0.296694] s8: supplied by regulator-dummy
  145. [ 0.296859] s9: supplied by regulator-dummy
  146. [ 0.297020] s10: supplied by regulator-dummy
  147. [ 0.297175] s11: supplied by regulator-dummy
  148. [ 0.297330] s12: supplied by regulator-dummy
  149. [ 0.297521] l1: supplied by s3
  150. [ 0.297557] l1: Bringing 0uV into 1000000-1000000uV
  151. [ 0.297979] l2: supplied by s3
  152. [ 0.298087] l2: Bringing 0uV into 1250000-1250000uV
  153. [ 0.298583] l3: supplied by s3
  154. [ 0.298625] l3: Bringing 0uV into 850000-850000uV
  155. [ 0.299188] l4: supplied by s3
  156. [ 0.299229] l4: Bringing 0uV into 1225000-1225000uV
  157. [ 0.299878] l5: supplied by s5
  158. [ 0.301070] NET: Registered protocol family 2
  159. [ 0.301607] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  160. [ 0.301882] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  161. [ 0.302014] TCP: Hash tables configured (established 32768 bind 32768)
  162. [ 0.302157] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  163. [ 0.302215] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  164. [ 0.302371] NET: Registered protocol family 1
  165. [ 0.302711] l6: supplied by regulator-dummy
  166. [ 0.302754] l6: Bringing 0uV into 1200000-1200000uV
  167. [ 0.303091] l7: supplied by s5
  168. [ 0.303289] l8: supplied by regulator-dummy
  169. [ 0.303328] l8: Bringing 0uV into 1800000-1800000uV
  170. [ 0.303588] l9: supplied by regulator-dummy
  171. [ 0.303625] l9: Bringing 0uV into 1800000-1800000uV
  172. [ 0.303976] l10: supplied by regulator-dummy
  173. [ 0.304017] l10: Bringing 0uV into 1800000-1800000uV
  174. [ 0.304316] l11: supplied by s3
  175. [ 0.304352] l11: Bringing 0uV into 1150000-1150000uV
  176. [ 0.304657] l12: supplied by regulator-dummy
  177. [ 0.304696] l12: Bringing 0uV into 1800000-1800000uV
  178. [ 0.304957] l13: supplied by regulator-dummy
  179. [ 0.305005] l13: Bringing 0uV into 1800000-1800000uV
  180. [ 0.305325] l14: supplied by s5
  181. [ 0.305359] l14: Bringing 0uV into 1800000-1800000uV
  182. [ 0.305654] l15: supplied by s5
  183. [ 0.305689] l15: Bringing 0uV into 1800000-1800000uV
  184. [ 0.306192] l16: supplied by regulator-dummy
  185. [ 0.306239] l16: Bringing 0uV into 2700000-2700000uV
  186. [ 0.306852] l17: supplied by regulator-dummy
  187. [ 0.306896] l17: Bringing 0uV into 2500000-2500000uV
  188. [ 0.307240] l18: supplied by regulator-dummy
  189. [ 0.307283] l18: Bringing 0uV into 2700000-2700000uV
  190. [ 0.307594] l19: supplied by regulator-dummy
  191. [ 0.307643] l19: Bringing 0uV into 3000000-3000000uV
  192. [ 0.308248] l20: supplied by s5
  193. [ 0.308298] l20: Bringing 0uV into 2950000-2950000uV
  194. [ 0.308653] l21: supplied by s5
  195. [ 0.308691] l21: Bringing 0uV into 2950000-2950000uV
  196. [ 0.309016] l22: supplied by regulator-dummy
  197. [ 0.309065] l22: Bringing 0uV into 3300000-3300000uV
  198. [ 0.309373] l23: supplied by regulator-dummy
  199. [ 0.309412] l23: Bringing 0uV into 2800000-2800000uV
  200. [ 0.309722] l24: supplied by regulator-dummy
  201. [ 0.309758] l24: Bringing 0uV into 3075000-3075000uV
  202. [ 0.310081] l25: supplied by s3
  203. [ 0.310131] l25: Bringing 0uV into 1200000-1200000uV
  204. [ 0.310453] l26: supplied by s3
  205. [ 0.310656] l27: supplied by s3
  206. [ 0.310692] l27: Bringing 0uV into 1000000-1000000uV
  207. [ 0.310812] RPC: Registered named UNIX socket transport module.
  208. [ 0.310827] RPC: Registered udp transport module.
  209. [ 0.310838] RPC: Registered tcp transport module.
  210. [ 0.310848] RPC: Registered tcp NFSv4.1 backchannel transport module.
  211. [ 0.310864] PCI: CLS 0 bytes, default 128
  212. [ 0.311009] Unpacking initramfs...
  213. [ 0.311050] l28: supplied by s3
  214. [ 0.311086] l28: Bringing 0uV into 925000-925000uV
  215. [ 0.311447] l29: supplied by regulator-dummy
  216. [ 0.311487] l29: Bringing 0uV into 2800000-2800000uV
  217. [ 0.311885] l30: supplied by regulator-dummy
  218. [ 0.311971] l30: Bringing 0uV into 1800000-1800000uV
  219. [ 0.312349] l31: supplied by s3
  220. [ 0.312600] l32: supplied by regulator-dummy
  221. [ 0.312639] l32: Bringing 0uV into 1800000-1800000uV
  222. [ 0.313097] lvs1: supplied by regulator-dummy
  223. [ 0.313301] lvs2: supplied by regulator-dummy
  224. [ 0.489289] Freeing initrd memory: 5568K
  225. [ 0.493783] kvm [1]: HYP mode not available
  226. [ 0.508795] audit: initializing netlink subsys (disabled)
  227. [ 0.512208] audit: type=2000 audit(0.503:1): state=initialized audit_enabled=0 res=1
  228. [ 0.512511] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  229. [ 0.518028] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  230. [ 0.519402] NFS: Registering the id_resolver key type
  231. [ 0.519434] Key type id_resolver registered
  232. [ 0.519445] Key type id_legacy registered
  233. [ 0.519461] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  234. [ 0.519640] 9p: Installing v9fs 9p2000 file system support
  235. [ 0.523805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  236. [ 0.523832] io scheduler noop registered
  237. [ 0.524034] io scheduler cfq registered (default)
  238. [ 0.524050] io scheduler mq-deadline registered
  239. [ 0.524060] io scheduler kyber registered
  240. [ 0.531280] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
  241. [ 0.531774] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
  242. [ 0.533176] ufs_qcom_phy_qmp_14nm 627000.ufsphy: invalid resource
  243. [ 0.533411] ufs_qcom_phy_qmp_14nm 627000.ufsphy: 627000.ufsphy supply vdda-pll not found, using dummy regulator
  244. [ 0.533495] ufs_qcom_phy_qmp_14nm 627000.ufsphy: 627000.ufsphy supply vdda-phy not found, using dummy regulator
  245. [ 0.539834] qcom-pcie 600000.qcom,pcie: Failed to get supply 'vddpe-3v3': -517
  246. [ 0.541700] qcom-pcie 608000.qcom,pcie: 608000.qcom,pcie supply vddpe-3v3 not found, using dummy regulator
  247. [ 0.542570] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00608000 ranges:
  248. [ 0.542605] OF: PCI: IO 0x0d200000..0x0d2fffff -> 0x0d200000
  249. [ 0.542624] OF: PCI: MEM 0x0d300000..0x0dffffff -> 0x0d300000
  250. [ 1.547738] qcom-pcie 608000.qcom,pcie: phy link never came up
  251. [ 1.549659] qcom-pcie 608000.qcom,pcie: cannot initialize host
  252. [ 1.549995] qcom-pcie: probe of 608000.qcom,pcie failed with error -110
  253. [ 1.550728] qcom-pcie 610000.qcom,pcie: 610000.qcom,pcie supply vddpe-3v3 not found, using dummy regulator
  254. [ 1.551024] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00610000 ranges:
  255. [ 1.551059] OF: PCI: IO 0x0e200000..0x0e2fffff -> 0x0e200000
  256. [ 1.551079] OF: PCI: MEM 0x0e300000..0x0fffffff -> 0x0e300000
  257. [ 1.655981] qcom-pcie 610000.qcom,pcie: link up
  258. [ 1.656150] qcom-pcie 610000.qcom,pcie: PCI host bridge to bus 0002:00
  259. [ 1.656167] pci_bus 0002:00: root bus resource [bus 00-ff]
  260. [ 1.656182] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xe200000-0xe2fffff])
  261. [ 1.656199] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff]
  262. [ 1.656242] pci 0002:00:00.0: [17cb:0104] type 01 class 0x060400
  263. [ 1.656298] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  264. [ 1.656400] pci 0002:00:00.0: PME# supported from D0 D3hot
  265. [ 1.656933] pci 0002:01:00.0: [1969:1083] type 00 class 0x020000
  266. [ 1.657447] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff 64bit]
  267. [ 1.657584] pci 0002:01:00.0: reg 0x18: [io 0x0000-0x007f]
  268. [ 1.659183] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  269. [ 1.672171] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff]
  270. [ 1.672193] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff 64bit]
  271. [ 1.672219] pci 0002:00:00.0: BAR 13: assigned [io 0x100000-0x100fff]
  272. [ 1.672236] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit]
  273. [ 1.672424] pci 0002:01:00.0: BAR 2: assigned [io 0x100000-0x10007f]
  274. [ 1.672489] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
  275. [ 1.672503] pci 0002:00:00.0: bridge window [io 0x100000-0x100fff]
  276. [ 1.672521] pci 0002:00:00.0: bridge window [mem 0x0e300000-0x0e3fffff]
  277. [ 1.672895] pcieport 0002:00:00.0: Signaling PME with IRQ 139
  278. [ 1.673044] pcieport 0002:00:00.0: AER enabled with IRQ 139
  279. [ 1.673162] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
  280. [ 1.674725] gpio-clk clocks:divclk1: could not find pctldev for node /soc/qcom,spmi@400f000/pmic@0/gpios@c000/clk_div1, deferring probe
  281. [ 1.706690] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  282. [ 1.710930] SuperH (H)SCI(F) driver initialized
  283. [ 1.712257] msm_serial 7570000.serial: msm_serial: detected port #2
  284. [ 1.712353] msm_serial 7570000.serial: uartclk = 19200000
  285. [ 1.712488] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 9, base_baud = 1200000) is a MSM
  286. [ 1.712837] serial serial0: tty port ttyMSM2 registered
  287. [ 1.713251] msm_serial 75b0000.serial: msm_serial: detected port #0
  288. [ 1.713348] msm_serial 75b0000.serial: uartclk = 7372800
  289. [ 1.713448] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
  290. [ 1.713507] msm_serial: console setup on port #0
  291. [ 3.327144] console [ttyMSM0] enabled
  292. [ 3.332685] msm_serial: driver initialized
  293. [ 3.336737] arm-smmu da0000.arm,smmu: probing hardware configuration...
  294. [ 3.339345] arm-smmu da0000.arm,smmu: SMMUv2 with:
  295. [ 3.345933] arm-smmu da0000.arm,smmu: stage 1 translation
  296. [ 3.350755] arm-smmu da0000.arm,smmu: address translation ops
  297. [ 3.356215] arm-smmu da0000.arm,smmu: non-coherent table walk
  298. [ 3.362034] arm-smmu da0000.arm,smmu: (IDR0.CTTW overridden by FW configuration)
  299. [ 3.367853] arm-smmu da0000.arm,smmu: stream matching with 4 register groups
  300. [ 3.375440] arm-smmu da0000.arm,smmu: 2 context banks (0 stage-2 only)
  301. [ 3.382544] arm-smmu da0000.arm,smmu: Supported page sizes: 0x63315000
  302. [ 3.388949] arm-smmu da0000.arm,smmu: Stage-1: 32-bit VA -> 36-bit IPA
  303. [ 3.397255] arm-smmu d00000.arm,smmu: probing hardware configuration...
  304. [ 3.402150] arm-smmu d00000.arm,smmu: SMMUv2 with:
  305. [ 3.408758] arm-smmu d00000.arm,smmu: stage 1 translation
  306. [ 3.413587] arm-smmu d00000.arm,smmu: address translation ops
  307. [ 3.419056] arm-smmu d00000.arm,smmu: non-coherent table walk
  308. [ 3.424872] arm-smmu d00000.arm,smmu: (IDR0.CTTW overridden by FW configuration)
  309. [ 3.430712] arm-smmu d00000.arm,smmu: stream matching with 2 register groups
  310. [ 3.438269] arm-smmu d00000.arm,smmu: 2 context banks (0 stage-2 only)
  311. [ 3.445392] arm-smmu d00000.arm,smmu: Supported page sizes: 0x63315000
  312. [ 3.451787] arm-smmu d00000.arm,smmu: Stage-1: 32-bit VA -> 36-bit IPA
  313. [ 3.459699] arm-smmu 1600000.arm,smmu-lpass_q6: probing hardware configuration...
  314. [ 3.465001] arm-smmu 1600000.arm,smmu-lpass_q6: SMMUv2 with:
  315. [ 3.472660] arm-smmu 1600000.arm,smmu-lpass_q6: stage 1 translation
  316. [ 3.478349] arm-smmu 1600000.arm,smmu-lpass_q6: address translation ops
  317. [ 3.484685] arm-smmu 1600000.arm,smmu-lpass_q6: non-coherent table walk
  318. [ 3.491367] arm-smmu 1600000.arm,smmu-lpass_q6: (IDR0.CTTW overridden by FW configuration)
  319. [ 3.498061] arm-smmu 1600000.arm,smmu-lpass_q6: stream matching with 15 register groups
  320. [ 3.506153] arm-smmu 1600000.arm,smmu-lpass_q6: 12 context banks (0 stage-2 only)
  321. [ 3.514488] arm-smmu 1600000.arm,smmu-lpass_q6: Supported page sizes: 0x63315000
  322. [ 3.521834] arm-smmu 1600000.arm,smmu-lpass_q6: Stage-1: 36-bit VA -> 36-bit IPA
  323. [ 3.531390] arm-smmu d40000.arm,smmu-venus: probing hardware configuration...
  324. [ 3.536876] arm-smmu d40000.arm,smmu-venus: SMMUv2 with:
  325. [ 3.544025] arm-smmu d40000.arm,smmu-venus: stage 1 translation
  326. [ 3.549355] arm-smmu d40000.arm,smmu-venus: address translation ops
  327. [ 3.555340] arm-smmu d40000.arm,smmu-venus: non-coherent table walk
  328. [ 3.561686] arm-smmu d40000.arm,smmu-venus: (IDR0.CTTW overridden by FW configuration)
  329. [ 3.568049] arm-smmu d40000.arm,smmu-venus: stream matching with 42 register groups
  330. [ 3.575794] arm-smmu d40000.arm,smmu-venus: 7 context banks (0 stage-2 only)
  331. [ 3.583767] arm-smmu d40000.arm,smmu-venus: Supported page sizes: 0x63315000
  332. [ 3.590757] arm-smmu d40000.arm,smmu-venus: Stage-1: 32-bit VA -> 36-bit IPA
  333. [ 3.632633] loop: module loaded
  334. [ 3.635330] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  335. [ 3.639196] scsi host0: ufshcd
  336. [ 3.666906] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  337. [ 3.668613] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  338. [ 3.675315] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
  339. [ 3.685459] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  340. [ 3.697816] s1: supplied by regulator-dummy
  341. [ 3.698550] s2: supplied by regulator-dummy
  342. [ 3.702271] s2: Bringing 1270000uV into 1015000-1015000uV
  343. [ 3.707213] l1: supplied by regulator-dummy
  344. [ 3.713975] libphy: Fixed MDIO Bus: probed
  345. [ 3.716338] tun: Universal TUN/TAP device driver, 1.6
  346. [ 3.721419] atl1c 0002:01:00.0: enabling device (0000 -> 0002)
  347. [ 3.784812] atl1c 0002:01:00.0: version 1.0.1.1-NAPI
  348. [ 3.786652] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  349. [ 3.788908] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  350. [ 3.794646] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  351. [ 3.800353] igb: Copyright (c) 2007-2014 Intel Corporation.
  352. [ 3.807384] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  353. [ 3.812853] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  354. [ 3.821789] sky2: driver version 1.30
  355. [ 3.827590] usbcore: registered new interface driver rtl8150
  356. [ 3.830489] usbcore: registered new interface driver r8152
  357. [ 3.836181] usbcore: registered new interface driver asix
  358. [ 3.841481] usbcore: registered new interface driver ax88179_178a
  359. [ 3.847173] VFIO - User Level meta-driver version: 0.3
  360. [ 3.858442] dwc3 7600000.dwc3: failed to initialize core
  361. [ 3.862024] dwc3 6a00000.dwc3: failed to initialize core
  362. [ 3.865625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  363. [ 3.868786] ehci-pci: EHCI PCI platform driver
  364. [ 3.875171] ehci-platform: EHCI generic platform driver
  365. [ 3.879963] ehci-orion: EHCI orion driver
  366. [ 3.884955] ehci-exynos: EHCI EXYNOS driver
  367. [ 3.888507] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
  368. [ 3.889116] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  369. [ 3.893693] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c150hN
  370. [ 3.904947] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  371. [ 3.910122] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  372. [ 3.921207] ohci-pci: OHCI PCI platform driver
  373. [ 3.928687] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c130hN
  374. [ 3.936345] ohci-platform: OHCI generic platform driver
  375. [ 3.940219] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  376. [ 3.951782] ohci-exynos: OHCI EXYNOS driver
  377. [ 3.957940] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c144hN
  378. [ 3.966156] usbcore: registered new interface driver usb-storage
  379. [ 3.968983] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  380. [ 3.980166] usbcore: registered new interface driver usbserial
  381. [ 3.987528] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  382. [ 3.994715] usbcore: registered new interface driver usbserial_generic
  383. [ 4.002595] sd 0:0:0:0: [sda] 14530560 4096-byte logical blocks: (59.5 GB/55.4 GiB)
  384. [ 4.008916] usbserial: USB Serial support registered for generic
  385. [ 4.015040] sd 0:0:0:0: [sda] 16384-byte physical blocks
  386. [ 4.019321] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  387. [ 4.027507] i2c /dev entries driver
  388. [ 4.029524] sd 0:0:0:0: [sda] Write Protect is off
  389. [ 4.035704] i2c_qup 75b5000.i2c: using default clock-frequency 100000
  390. [ 4.042721] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
  391. [ 4.045757] i2c_qup 75b5000.i2c:
  392. tx channel not available
  393. [ 4.050941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  394. [ 4.063360] i2c_qup 75b6000.i2c: using default clock-frequency 100000
  395. [ 4.069760] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  396. [ 4.077829] i2c_qup 75b6000.i2c:
  397. tx channel not available
  398. [ 4.083610] sd 0:0:0:1: [sdb] 16384-byte physical blocks
  399. [ 4.086021] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  400. [ 4.096554] i2c_qup 7577000.i2c: using default clock-frequency 100000
  401. [ 4.097995] sd 0:0:0:1: [sdb] Write Protect is off
  402. [ 4.103155] i2c_qup 7577000.i2c:
  403. tx channel not available
  404. [ 4.113037] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  405. [ 4.118530] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
  406. [ 4.124668] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:pwrkey/input/input0
  407. [ 4.129564] random: fast init done
  408. [ 4.142772] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:resin/input/input1
  409. [ 4.159586] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  410. [ 4.177205] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 614400 KHz
  411. [ 4.180759] sda: sda1
  412. [ 4.185623] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 652800 KHz
  413. [ 4.186163] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  414. [ 4.186462] sd 0:0:0:2: [sdc] 16384-byte physical blocks
  415. [ 4.193316] sd 0:0:0:2: [sdc] Write Protect is off
  416. [ 4.196425] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 19200 KHz
  417. [ 4.196731] sd 0:0:0:0: [sda] Attached SCSI disk
  418. [ 4.196814] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
  419. [ 4.196818] sd 0:0:0:3: [sdd] 16384-byte physical blocks
  420. [ 4.196984] sd 0:0:0:3: [sdd] Write Protect is off
  421. [ 4.196987] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
  422. [ 4.197241] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  423. [ 4.197468] sdb: sdb1
  424. [ 4.199290] sd 0:0:0:1: [sdb] Attached SCSI disk
  425. [ 4.200165] sdd: sdd1 sdd2 sdd3
  426. [ 4.202108] sd 0:0:0:3: [sdd] Attached SCSI disk
  427. [ 4.208358] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
  428. [ 4.210421] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 307200 KHz
  429. [ 4.216084] scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  430. [ 4.221111] sdhci: Secure Digital Host Controller Interface driver
  431. [ 4.228108] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  432. [ 4.232365] sdhci: Copyright(c) Pierre Ossman
  433. [ 4.232668] Synopsys Designware Multimedia Card Interface Driver
  434. [ 4.241093] scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
  435. [ 4.241799] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
  436. [ 4.241803] sd 0:0:0:4: [sde] 16384-byte physical blocks
  437. [ 4.241961] sd 0:0:0:4: [sde] Write Protect is off
  438. [ 4.241965] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
  439. [ 4.242214] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
  440. [ 4.242758] sdc: sdc1
  441. [ 4.245118] sd 0:0:0:2: [sdc] Attached SCSI disk
  442. [ 4.245869] sdhci-pltfm: SDHCI platform and OF driver helper
  443. [ 4.246826] sdhci_msm 74a4900.sdhci: Got CD GPIO
  444. [ 4.376363] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30
  445. [ 4.377906] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
  446. [ 4.397749] sd 0:0:0:5: [sdf] 16384-byte physical blocks
  447. [ 4.404950] sd 0:0:0:5: [sdf] Write Protect is off
  448. [ 4.410248] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
  449. [ 4.415204] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
  450. [ 4.420262] sd 0:0:0:4: [sde] Attached SCSI disk
  451. [ 4.421981] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
  452. [ 4.435057] sd 0:0:0:5: [sdf] Attached SCSI disk
  453. [ 4.452329] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit
  454. [ 4.455277] ledtrig-cpu: registered to indicate activity on CPUs
  455. [ 4.462184] usbcore: registered new interface driver usbhid
  456. [ 4.465232] usbhid: USB HID core driver
  457. [ 4.472971] usbcore: registered new interface driver snd-usb-audio
  458. [ 4.475671] NET: Registered protocol family 10
  459. [ 4.481386] Segment Routing with IPv6
  460. [ 4.485067] NET: Registered protocol family 17
  461. [ 4.488858] 9pnet: Installing 9P2000 support
  462. [ 4.493150] Key type dns_resolver registered
  463. [ 4.498251] registered taskstats version 1
  464. [ 4.517907] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy
  465. [ 4.518374] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy
  466. [ 4.523606] qcom-pcie 600000.qcom,pcie: Unbalanced pm_runtime_enable!
  467. [ 4.529698] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00600000 ranges:
  468. [ 4.535521] OF: PCI: IO 0x0c200000..0x0c2fffff -> 0x0c200000
  469. [ 4.542278] OF: PCI: MEM 0x0c300000..0x0cffffff -> 0x0c300000
  470. [ 4.730024] qcom-pcie 600000.qcom,pcie: link up
  471. [ 4.730371] qcom-pcie 600000.qcom,pcie: PCI host bridge to bus 0000:00
  472. [ 4.733441] pci_bus 0000:00: root bus resource [bus 00-ff]
  473. [ 4.740029] pci_bus 0000:00: root bus resource [io 0x200000-0x2fffff] (bus address [0xc200000-0xc2fffff])
  474. [ 4.745502] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
  475. [ 4.755167] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
  476. [ 4.762028] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  477. [ 4.768259] pci 0000:00:00.0: PME# supported from D0 D3hot
  478. [ 4.775615] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
  479. [ 4.780669] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  480. [ 4.787867] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  481. [ 4.804160] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff]
  482. [ 4.804183] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
  483. [ 4.809945] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
  484. [ 4.817247] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  485. [ 4.824427] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
  486. [ 4.829908] pcieport 0000:00:00.0: Signaling PME with IRQ 218
  487. [ 4.836664] pcieport 0000:00:00.0: AER enabled with IRQ 218
  488. [ 4.843652] arm-smmu b40000.arm,smmu: probing hardware configuration...
  489. [ 4.847700] arm-smmu b40000.arm,smmu: SMMUv2 with:
  490. [ 4.854316] arm-smmu b40000.arm,smmu: stage 1 translation
  491. [ 4.859144] arm-smmu b40000.arm,smmu: address translation ops
  492. [ 4.864612] arm-smmu b40000.arm,smmu: non-coherent table walk
  493. [ 4.870433] arm-smmu b40000.arm,smmu: (IDR0.CTTW overridden by FW configuration)
  494. [ 4.876248] arm-smmu b40000.arm,smmu: stream matching with 2 register groups
  495. [ 4.883824] arm-smmu b40000.arm,smmu: 2 context banks (0 stage-2 only)
  496. [ 4.890937] arm-smmu b40000.arm,smmu: Supported page sizes: 0x63315000
  497. [ 4.897343] arm-smmu b40000.arm,smmu: Stage-1: 48-bit VA -> 36-bit IPA
  498. [ 4.912082] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  499. [ 4.912123] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  500. [ 4.916729] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
  501. [ 4.924048] xhci-hcd xhci-hcd.0.auto: irq 182, io mem 0x06a00000
  502. [ 4.933884] hub 1-0:1.0: USB hub found
  503. [ 4.939654] hub 1-0:1.0: 1 port detected
  504. [ 4.943327] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  505. [ 4.947279] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  506. [ 4.952579] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  507. [ 4.960158] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  508. [ 4.967140] hub 2-0:1.0: USB hub found
  509. [ 4.975079] hub 2-0:1.0: 1 port detected
  510. [ 4.980329] input: gpio_keys as /devices/platform/gpio_keys/input/input2
  511. [ 4.982974] hctosys: unable to open rtc device (rtc0)
  512. [ 4.990079] ALSA device list:
  513. [ 4.994407] No soundcards found.
  514. [ 4.997771] Freeing unused kernel memory: 1216K
  515. [ 5.279946] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  516. [ 5.350001] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0
  517. [ 5.472895] hub 1-1:1.0: USB hub found
  518. [ 5.473911] hub 1-1:1.0: 4 ports detected
  519. [ 5.560631] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
  520. [ 5.604850] hub 2-1:1.0: USB hub found
  521. [ 5.606203] hub 2-1:1.0: 4 ports detected
  522. [ 5.795972] usb 1-1.2: new low-speed USB device number 3 using xhci-hcd
  523. [ 5.872103] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
  524. [ 5.874392] EXT4-fs (sda1): write access will be enabled during recovery
  525. [ 5.922667] input: Logitech Logitech USB Optical Mouse as /devices/platform/soc/6af8800.usb/6a00000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C018.0001/input/input3
  526. [ 5.922817] hid-generic 0003:046D:C018.0001: input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-xhci-hcd.0.auto-1.2/input0
  527. [ 5.973303] EXT4-fs (sda1): recovery complete
  528. [ 5.974098] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  529. [ 6.000022] usb 2-1.4: new SuperSpeed USB device number 3 using xhci-hcd
  530. [ 6.099995] usb 1-1.3: new low-speed USB device number 4 using xhci-hcd
  531. [ 6.170531] systemd[1]: System time before build time, advancing clock.
  532. [ 6.194138] ip_tables: (C) 2000-2006 Netfilter Core Team
  533. [ 6.246498] input: LITEON Technology USB Keyboard as /devices/platform/soc/6af8800.usb/6a00000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:07B9.0002/input/input4
  534. [ 6.288301] usb 2-1.4: reset SuperSpeed USB device number 3 using xhci-hcd
  535. [ 6.304731] hid-generic 0003:045E:07B9.0002: input: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-xhci-hcd.0.auto-1.3/input0
  536. [ 6.361090] r8152 2-1.4:1.0 eth0: v1.09.9
  537. [ 6.489233] random: systemd: uninitialized urandom read (16 bytes read)
  538. [ 6.492628] random: systemd: uninitialized urandom read (16 bytes read)
  539. [ 6.495450] random: systemd: uninitialized urandom read (16 bytes read)
  540. [ 6.836277] EXT4-fs (sda1): re-mounted. Opts: data=ordered
  541. [ 7.085571] systemd-journald[1812]: Received request to flush runtime journal from PID 1
  542. [ 7.662356] qcom_adsp_pil adsp-pil: adsp-pil supply cx not found, using dummy regulator
  543. [ 7.662454] qcom_adsp_pil adsp-pil: adsp-pil supply px not found, using dummy regulator
  544. [ 7.681191] NET: Registered protocol family 42
  545. [ 7.682272] remoteproc remoteproc0: adsp-pil is available
  546. [ 7.686898] remoteproc remoteproc0: powering up adsp-pil
  547. [ 7.690222] remoteproc remoteproc0: Booting fw image adsp.mdt, size 7196
  548. [ 7.711503] remoteproc remoteproc1: 2080000.remoteproc is available
  549. [ 7.724693] remoteproc remoteproc1: powering up 2080000.remoteproc
  550. [ 7.724725] remoteproc remoteproc1: Booting fw image mba.mbn, size 213888
  551. [ 7.795930] qcom-q6v5-pil 2080000.remoteproc: MBA booted, loading mpss
  552. [ 7.902251] remoteproc remoteproc0: remote processor adsp-pil is now up
  553. [ 7.938927] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
  554. [ 7.945289] random: crng init done
  555. [ 7.951104] random: 7 urandom warning(s) missed due to ratelimiting
  556. [ 8.090987] Bluetooth: Core ver 2.22
  557. [ 8.097164] NET: Registered protocol family 31
  558. [ 8.097191] Bluetooth: HCI device and connection manager initialized
  559. [ 8.097560] iommu: Adding device b00000.gpu to group 0
  560. [ 8.101057] Bluetooth: HCI socket layer initialized
  561. [ 8.111191] adreno b00000.gpu: Linked as a consumer to b40000.arm,smmu
  562. [ 8.114643] Bluetooth: L2CAP socket layer initialized
  563. [ 8.135937] iommu: Adding device 901000.mdp to group 1
  564. [ 8.138326] Bluetooth: SCO socket layer initialized
  565. [ 8.143721] msm_mdp 901000.mdp: Linked as a consumer to d00000.arm,smmu
  566. [ 8.170728] msm_hdmi_phy 9a0600.hdmi-phy: Using legacy clk name binding. Use "iface" instead of "iface_clk"
  567. [ 8.171076] msm_hdmi_phy 9a0600.hdmi-phy: Using legacy clk name binding. Use "ref" instead of "ref_clk"
  568. [ 8.203009] msm 900000.mdss: Using legacy clk name binding. Use "iface" instead of "iface_clk"
  569. [ 8.203300] msm 900000.mdss: 900000.mdss supply vdd not found, using dummy regulator
  570. [ 8.212194] remoteproc remoteproc1: remote processor 2080000.remoteproc is now up
  571. [ 8.258111] media: Linux media interface: v0.10
  572. [ 8.261633] msm_mdp 901000.mdp: Using legacy clk name binding. Use "bus" instead of "bus_clk"
  573. [ 8.261714] msm_mdp 901000.mdp: Using legacy clk name binding. Use "iface" instead of "iface_clk"
  574. [ 8.281462] Linux video capture interface: v2.00
  575. [ 8.281899] msm_mdp 901000.mdp: Using legacy clk name binding. Use "core" instead of "core_clk"
  576. [ 8.284596] Bluetooth: HCI UART driver ver 2.3
  577. [ 8.286801] r8152 2-1.4:1.0 enx503eaa26d3a4: renamed from eth0
  578. [ 8.292842] msm_mdp 901000.mdp: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
  579. [ 8.293085] msm_mdp 901000.mdp: MDP5 version v1.7
  580. [ 8.293331] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops [msm])
  581. [ 8.293738] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding. Use "iface" instead of "iface_clk"
  582. [ 8.293768] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding. Use "core" instead of "core_clk"
  583. [ 8.293782] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding. Use "mdp_core" instead of "mdp_core_clk"
  584. [ 8.293829] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding. Use "extp" instead of "extp_clk"
  585. [ 8.293864] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding. Use "alt_iface" instead of "alt_iface_clk"
  586. [ 8.296084] Bluetooth: HCI UART protocol H4 registered
  587. [ 8.308200] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops [msm])
  588. [ 8.313229] Bluetooth: HCI UART protocol BCSP registered
  589. [ 8.358236] adreno b00000.gpu: b00000.gpu supply vdd not found, using dummy regulator
  590. [ 8.361739] Bluetooth: HCI UART protocol LL registered
  591. [ 8.365688] msm-snd-apq8096 sound: error getting cpu dai name
  592. [ 8.365691] msm-snd-apq8096 sound: Error parsing OF data
  593. [ 8.398744] adreno b00000.gpu: b00000.gpu supply vddcx not found, using dummy regulator
  594. [ 8.402373] Bluetooth: HCI UART protocol Three-wire (H5) registered
  595. [ 8.421760] Bluetooth: HCI UART protocol QCA registered
  596. [ 8.432212] msm-snd-apq8096 sound: error getting cpu dai name
  597. [ 8.432260] msm-snd-apq8096 sound: Error parsing OF data
  598. [ 8.436079] msm 900000.mdss: A530: using IOMMU
  599. [ 8.439747] Bluetooth: hci0: ROME setup
  600. [ 8.447703] Bluetooth: hci0: Set UART speed to 3000000
  601. [ 8.467825] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops [msm])
  602. [ 8.548179] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
  603. [ 8.550253] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  604. [ 8.575197] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6core:4:3
  605. [ 8.575350] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6afe:4:4
  606. [ 8.589289] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6asm:4:7
  607. [ 8.600832] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6adm:4:8
  608. [ 8.601731] msm-snd-apq8096 sound: error getting cpu dai name
  609. [ 8.609313] msm-snd-apq8096 sound: Error parsing OF data
  610. [ 8.615872] msm-snd-apq8096 sound: error getting cpu dai name
  611. [ 8.623965] msm-snd-apq8096 sound: Error parsing OF data
  612. [ 8.629266] qcom,slim-ngd-ctrl 91c0000.slim: SLIM SAT: Rcvd master capability
  613. [ 8.656370] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  614. [ 8.658679] [drm] Driver supports precise vblank timestamp query.
  615. [ 8.667262] msm-snd-apq8096 sound: error getting cpu dai name
  616. [ 8.671493] msm-snd-apq8096 sound: Error parsing OF data
  617. [ 8.676711] [drm] Initialized msm 1.3.0 20130625 for 900000.mdss on minor 0
  618. [ 8.682818] msm-snd-apq8096 sound: error getting cpu dai name
  619. [ 8.682823] msm-snd-apq8096 sound: Error parsing OF data
  620. [ 8.686139] msm-snd-apq8096 sound: error getting cpu dai name
  621. [ 8.700370] msm-snd-apq8096 sound: Error parsing OF data
  622. [ 8.701146] msm-snd-apq8096 sound: error getting cpu dai name
  623. [ 8.711303] msm-snd-apq8096 sound: Error parsing OF data
  624. [ 8.717810] msm-snd-apq8096 sound: error getting cpu dai name
  625. [ 8.719582] iommu: Adding device adsp-pil:smd-edge:apr:q6asm:dais to group 2
  626. [ 8.722332] msm-snd-apq8096 sound: Error parsing OF data
  627. [ 8.735510] q6asm-dai adsp-pil:smd-edge:apr:q6asm:dais: Linked as a consumer to 1600000.arm,smmu-lpass_q6
  628. [ 8.736512] msm-snd-apq8096 sound: codec dai not found
  629. [ 8.736516] msm-snd-apq8096 sound: Error parsing OF data
  630. [ 8.757378] msm_hdmi_hdcp_read_validate_aksv: AKSV QFPROM doesn't have 20 1's, 20 0's
  631. [ 8.757382] msm_hdmi_hdcp_read_validate_aksv: QFPROM AKSV chk failed (AKSV=6800000000)
  632. [ 8.757383] msm_hdmi_hdcp_auth_prepare: ASKV validation failed
  633. [ 8.757386] msm_hdmi_hdcp_auth_work: auth prepare failed -524
  634. [ 8.757387] msm_hdmi_hdcp_auth_work: hdcp is not supported
  635. [ 8.757578] Console: switching to colour frame buffer device 240x67
  636. [ 8.776897] Bluetooth: hci0: ROME controller version 0x00440302
  637. [ 8.776909] Bluetooth: hci0: ROME Downloading qca/rampatch_00440302.bin
  638. [ 8.777647] bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with error -2
  639. [ 8.777664] Bluetooth: hci0: Failed to request file: qca/rampatch_00440302.bin (-2)
  640. [ 8.777673] Bluetooth: hci0: Failed to download patch (-2)
  641. [ 8.848927] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
  642. [ 8.855586] msm 900000.mdss: fb0: msm frame buffer device
  643. [ 8.864592] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
  644. [ 8.898163] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 0000:0000
  645. [ 8.900963] msm-snd-apq8096 sound: codec dai not found
  646. [ 8.904161] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
  647. [ 8.919891] msm-snd-apq8096 sound: Error parsing OF data
  648. [ 8.920051] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
  649. [ 8.922609] iommu: Adding device c00000.video-codec to group 3
  650. [ 8.923928] qcom-venus c00000.video-codec: Linked as a consumer to d40000.arm,smmu-venus
  651. [ 8.930214] msm-snd-apq8096 sound: codec dai not found
  652. [ 8.957607] msm-snd-apq8096 sound: Error parsing OF data
  653. [ 8.958700] msm-snd-apq8096 sound: codec dai not found
  654. [ 8.958704] msm-snd-apq8096 sound: Error parsing OF data
  655. [ 9.004097] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=1 from ath10k/QCA6174/hw3.0/board-2.bin
  656. [ 9.018709] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id 0:1 crc32 ed5f849a
  657. [ 9.047501] msm-snd-apq8096 sound: codec dai not found
  658. [ 9.047505] msm-snd-apq8096 sound: Error parsing OF data
  659. [ 9.048200] iommu: Adding device a34000.camss to group 4
  660. [ 9.048413] qcom-camss a34000.camss: Linked as a consumer to da0000.arm,smmu
  661. [ 9.068028] msm-snd-apq8096 sound: codec dai not found
  662. [ 9.068033] msm-snd-apq8096 sound: Error parsing OF data
  663. [ 9.072330] msm-snd-apq8096 sound: codec dai not found
  664. [ 9.072336] msm-snd-apq8096 sound: Error parsing OF data
  665. [ 9.075871] msm-snd-apq8096 sound: codec dai not found
  666. [ 9.075877] msm-snd-apq8096 sound: Error parsing OF data
  667. [ 9.096255] qcom-camss a34000.camss: VFE HW Version = 0x70020000
  668. [ 9.111542] qcom-camss a34000.camss: VFE HW Version = 0x70020000
  669. [ 9.114052] qcom-camss a34000.camss: VFE HW Version = 0x70020000
  670. [ 9.127600] qcom-camss a34000.camss: VFE HW Version = 0x70020000
  671. [ 9.161503] ov5640 4-003b: OV5640 detected at address 0x3b
  672. [ 9.177480] qcom-camss a34000.camss: VFE HW Version = 0x70020000
  673. [ 9.203292] qcom-camss a34000.camss: VFE HW Version = 0x70020000
  674. [ 9.211556] qcom-camss a34000.camss: VFE HW Version = 0x70020000
  675. [ 9.219130] qcom-camss a34000.camss: VFE HW Version = 0x70020000
  676. [ 9.244642] msm-snd-apq8096 sound: codec dai not found
  677. [ 9.251135] msm-snd-apq8096 sound: Error parsing OF data
  678. [ 9.608156] wcd9335-slim 217:1a0:0:0: setting slimbus l-addr:ca, ea:217,1a0,0,0
  679. [ 9.614696] slimbus 217:1a0:1:0: setting slimbus l-addr:cb, ea:217,1a0,1,0
  680. [ 9.624733] msm-snd-apq8096 sound: codec dai not found
  681. [ 9.631281] msm-snd-apq8096 sound: Error parsing OF data
  682. [ 9.637824] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
  683. [ 9.637828] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
  684. [ 9.651024] ath10k_pci 0000:01:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
  685. [ 9.688709] wcd9335-slim 217:1a0:1:0: WCD9335 CODEC version is v2.0
  686. [ 9.703029] msm-snd-apq8096 sound: codec dai not found
  687. [ 9.709812] msm-snd-apq8096 sound: Error parsing OF data
  688. [ 9.722121] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback
  689. [ 9.739947] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX
  690. [ 9.749199] ath: EEPROM regdomain: 0x0
  691. [ 9.756491] ath: EEPROM indicates default country code should be used
  692. [ 9.763389] ath: doing EEPROM country->regdmn map search
  693. [ 9.769875] ath: country maps to regdmn code: 0x3a
  694. [ 9.777653] ath: Country alpha2 being used: US
  695. [ 9.783417] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  696. [ 9.784183] ath: Regpair used: 0x3a
  697. [ 9.802485] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  698. [ 9.810057] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  699. [ 9.811302] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
  700. [ 9.816959] msm-snd-apq8096 sound: i2s-hifi <-> HDMI mapping ok
  701. [ 9.830626] msm-snd-apq8096 sound: wcd9335_rx4 <-> SLIMBUS_6_RX mapping ok
  702. [ 9.837410] msm-snd-apq8096 sound: wcd9335_tx1 <-> SLIMBUS_0_TX mapping ok
  703. [ 9.847097] msm-snd-apq8096 sound: ASoC: no source widget found for Headset Mic
  704. [ 9.853796] msm-snd-apq8096 sound: ASoC: Failed to add route Headset Mic -> direct -> MIC BIAS2
  705. [ 9.860670] msm-snd-apq8096 sound: ASoC: no source widget found for Headset Mic
  706. [ 9.868732] msm-snd-apq8096 sound: ASoC: Failed to add route Headset Mic -> direct -> MIC BIAS2
  707. [ 9.876148] msm-snd-apq8096 sound: ASoC: no source widget found for ANCLeft Headset Mic
  708. [ 9.884604] msm-snd-apq8096 sound: ASoC: Failed to add route ANCLeft Headset Mic -> direct -> MIC BIAS2
  709. [ 9.892651] msm-snd-apq8096 sound: ASoC: no source widget found for ANCRight Headset Mic
  710. [ 9.901936] msm-snd-apq8096 sound: ASoC: Failed to add route ANCRight Headset Mic -> direct -> MIC BIAS2
  711. [ 9.910252] msm-snd-apq8096 sound: ASoC: no source widget found for Analog Mic6
  712. [ 9.919523] msm-snd-apq8096 sound: ASoC: Failed to add route Analog Mic6 -> direct -> MIC BIAS2
  713. [ 9.926493] msm-snd-apq8096 sound: ASoC: no source widget found for Analog Mic7
  714. [ 9.935005] msm-snd-apq8096 sound: ASoC: Failed to add route Analog Mic7 -> direct -> MIC BIAS2
  715. [ 9.942340] msm-snd-apq8096 sound: ASoC: no source widget found for Digital Mic2
  716. [ 9.950762] msm-snd-apq8096 sound: ASoC: Failed to add route Digital Mic2 -> direct -> MIC BIAS1
  717. [ 9.958482] msm-snd-apq8096 sound: ASoC: no source widget found for Digital Mic3
  718. [ 9.967135] msm-snd-apq8096 sound: ASoC: Failed to add route Digital Mic3 -> direct -> MIC BIAS1
  719. [ 9.974728] msm-snd-apq8096 sound: ASoC: no source widget found for Digital Mic4
  720. [ 9.983349] msm-snd-apq8096 sound: ASoC: Failed to add route Digital Mic4 -> direct -> MIC BIAS3
  721. [ 9.990889] msm-snd-apq8096 sound: ASoC: no source widget found for Digital Mic5
  722. [ 9.999441] msm-snd-apq8096 sound: ASoC: Failed to add route Digital Mic5 -> direct -> MIC BIAS3
  723. [ 10.006804] msm-snd-apq8096 sound: ASoC: no source widget found for SPK1 OUT
  724. [ 10.015430] msm-snd-apq8096 sound: ASoC: Failed to add route SPK1 OUT -> direct -> SpkrLeft IN
  725. [ 10.022642] msm-snd-apq8096 sound: ASoC: no source widget found for SPK2 OUT
  726. [ 10.030957] msm-snd-apq8096 sound: ASoC: Failed to add route SPK2 OUT -> direct -> SpkrRight IN
  727. [ 10.038183] msm-snd-apq8096 sound: ASoC: no DMI vendor name!
  728. [ 10.143483] input: DB820c Headset Jack as /devices/platform/sound/sound/card0/input5
  729. [ 10.486419] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  730. [ 10.492750] Bluetooth: BNEP filters: protocol multicast
  731. [ 10.504236] Bluetooth: BNEP socket layer initialized
  732. [ 10.742749] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0: link is not ready
  733. [ 10.790191] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0: link is not ready
  734. [ 10.864854] IPv6: ADDRCONF(NETDEV_UP): enx503eaa26d3a4: link is not ready
  735. [ 10.877048] IPv6: ADDRCONF(NETDEV_UP): enx503eaa26d3a4: link is not ready
  736. [ 10.897169] r8152 2-1.4:1.0 enx503eaa26d3a4: carrier on
  737. [ 10.904008] IPv6: ADDRCONF(NETDEV_CHANGE): enx503eaa26d3a4: link becomes ready
  738. [ 10.927349] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  739. [ 11.156497] msm 900000.mdss: loaded qcom/a530_pm4.fw from legacy location
  740. [ 11.164178] msm 900000.mdss: loaded qcom/a530_pfp.fw from legacy location
  741. [ 11.172413] msm 900000.mdss: loaded qcom/a530v3_gpmu.fw2 from legacy location
  742. [ 11.180955] msm 900000.mdss: loaded qcom/a530_zap.mdt from legacy location
  743. [ 11.670831] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
  744. [ 11.673695] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
  745. [ 11.700461] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  746. [ 12.519872] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
  747. [ 12.522829] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
  748. [ 12.547542] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  749. [ 12.667567] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  750. [ 15.576188] Bluetooth: RFCOMM TTY layer initialized
  751. [ 15.576233] Bluetooth: RFCOMM socket layer initialized
  752. [ 15.579951] Bluetooth: RFCOMM ver 1.11
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!