Slic3r Purge Bin

end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n";"; Filament-specific end gcode \n;END gcode for filament\n";"; Filament-specific end gcode \n;END gcode for filament\n"
end_gcode = M104 S0; extinguish the extruder temperature\nM140 S0; turn off the temperature of the bed\nM106 S0 ; turn off the fan\nG92 E1; Relative position of the extruder\nG1 E-3 F300;  movement of the extruder at -1mm at a speed of 300 mm per minute\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X20 Y200; movement on x of 20 mm and on y of 200\nM84 ; extinguish the engines\nM300 S300 P2000 ; beep when everything is finished\n

start_filament_gcode = "M163 S0 P0.0\nM163 S1 P1.0\nM164 S1\n; Filament gcode\n";"M163 S0 P1.0\nM163 S1 P0.0\nM164 S0\n; Filament gcode\n";"; Filament gcode\nM163 S0 P0.5\nM163 S1 P0.5\nM164 S2\n"
start_gcode = G28 ; Moving to origins\nM117 Preheating ...; preheating message display\nM104 S[first_layer_temperature];  define the extruder temperature in relation to the parameters of the slicer\nM140 S[first_layer_bed_temperature]; set the temperature of the bed in relation to the parameters of the slicer\nM109 R[first_layer_temperature]; once the temperature has been set, wait for the right temperature\nG29 ; autolevel\nM211 S0;  Enable software shutdowns\nG91 ; Relative position\nG1 Z3 F1000 ;  vertical movement 3 mm to 1000 mm per minute\nG90 ; Position absolu\nG92 E0 ; définir la position de l'extrudeur\nG1 X-9.5 F6000 ;\nG1 E55 F180 ; mouvement de l'extrudeur de 55 mm par minute à une vitesse de 180 mm par minute\nG91 ; Position relative\nG1 E-4 F1800 ; mouvement extrudeur -4 mm par minute à une vitesse de 1800 mm par minute\nG90 ;Position absolu\nM211 S1 ; désactiver les arrêts logiciels

toolchange_gcode = M211 S0; Activate software stop - S0 = deactivation control the end state of the software.\nG91 ; Relative position\nG1 Z3 F1000 ; Linear displacement\nG90 ; absolute position\nG92 E0 ; Reset the extrusion distance needed for the next steps\nG1 E-15 F1800; movement - extruder E retraction -15 E-X has a speed of 1800 mm per minute\nG1 X-10.5 F6000 ; X-axis movement of -X at a speed of 6000 mm per minute\nG92 E0 ; Reset the extrusion distance needed for the next steps\nT[next_extruder]; select the new extruder tool\nG92 E0 ; select the tool E0\nG1 E60 F180 ; movement - extruder has E xmm at a speed of 180 mm per minute\nG92 E0 ;  Reset the extrusion distance needed for the next steps\nG1 E-15 F1800 ; mouvement - extrudeur E retraction a  E-X mm a  une vitesse de 1800 mm par minute\nG1 X10 Y10 F6000 ; X-axis movement of -X at a speed of 6000 mm per minute\nG91 ; Relative position\nG90 ; absolute position\nM211 S1 ; Enable software stop - S1 = active controls the end state of the software.\nT[previous_extruder]; select the new extruder tool