Public Pastes
daily pastebin goal
70%
SHARE
TWEET

Untitled

a guest Jul 15th, 2012 24 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    1.594898] fuse init (API version 7.17)
  2. [    1.595006] msgmni has been set to 10900
  3. [    1.595771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  4. [    1.595835] io scheduler noop registered
  5. [    1.595837] io scheduler deadline registered
  6. [    1.595872] io scheduler cfq registered (default)
  7. [    1.595997] pcieport 0000:00:04.0: setting latency timer to 64
  8. [    1.596107] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
  9. [    1.596173] pcieport 0000:00:05.0: setting latency timer to 64
  10. [    1.596209] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
  11. [    1.596289] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
  12. [    1.596292] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  13. [    1.596297] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
  14. [    1.596312] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
  15. [    1.596314] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  16. [    1.596318] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
  17. [    1.596334] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  18. [    1.596358] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  19. [    1.596429] efifb: probing for efifb
  20. [    1.596435] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 56k, total 64k
  21. [    1.596438] efifb: mode is 640x350x1, linelength=80, pages=1
  22. [    1.596439] efifb: scrolling: redraw
  23. [    1.596442] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  24. [    1.596582] Console: switching to colour frame buffer device 80x43
  25. [    1.596599] fb0: EFI VGA frame buffer device
  26. [    1.596690] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  27. [    1.596696] ACPI: Power Button [PWRB]
  28. [    1.596738] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  29. [    1.596741] ACPI: Power Button [PWRF]
  30. [    1.596886] ACPI: acpi_idle registered with cpuidle
  31. [    1.598538] ERST: Table is not found!
  32. [    1.598541] GHES: HEST is not enabled!
  33. [    1.598639] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  34. [    1.812579] Linux agpgart interface v0.103
  35. [    1.814285] brd: module loaded
  36. [    1.815211] loop: module loaded
  37. [    1.815350] ahci 0000:00:11.0: version 3.0
  38. [    1.815418] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  39. [    1.815481] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
  40. [    1.815540] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  41. [    1.815544] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
  42. [    1.815550] ahci 0000:00:11.0: setting latency timer to 64
  43. [    1.815959] scsi0 : ahci
  44. [    1.816075] scsi1 : ahci
  45. [    1.816122] ata1: SATA max UDMA/133 abar m2048@0xfeb4b000 port 0xfeb4b100 irq 42
  46. [    1.816125] ata2: SATA max UDMA/133 abar m2048@0xfeb4b000 port 0xfeb4b180 irq 42
  47. [    1.816486] Fixed MDIO Bus: probed
  48. [    1.816505] tun: Universal TUN/TAP device driver, 1.6
  49. [    1.816507] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  50. [    1.816620] PPP generic driver version 2.4.2
  51. [    1.816759] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  52. [    1.816774] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  53. [    1.816791] ehci_hcd 0000:00:12.2: setting latency timer to 64
  54. [    1.816795] ehci_hcd 0000:00:12.2: EHCI Host Controller
  55. [    1.816839] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
  56. [    1.816847] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  57. [    1.816876] QUIRK: Enable AMD PLL fix
  58. [    1.816889] ehci_hcd 0000:00:12.2: debug port 1
  59. [    1.816908] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb49000
  60. [    1.828070] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
  61. [    1.828272] hub 1-0:1.0: USB hub found
  62. [    1.828276] hub 1-0:1.0: 5 ports detected
  63. [    1.828366] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  64. [    1.828377] ehci_hcd 0000:00:13.2: setting latency timer to 64
  65. [    1.828380] ehci_hcd 0000:00:13.2: EHCI Host Controller
  66. [    1.828428] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
  67. [    1.828434] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  68. [    1.828453] ehci_hcd 0000:00:13.2: debug port 1
  69. [    1.828464] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb47000
  70. [    1.840068] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
  71. [    1.840237] hub 2-0:1.0: USB hub found
  72. [    1.840240] hub 2-0:1.0: 5 ports detected
  73. [    1.840310] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  74. [    1.840320] ehci_hcd 0000:00:16.2: setting latency timer to 64
  75. [    1.840323] ehci_hcd 0000:00:16.2: EHCI Host Controller
  76. [    1.840368] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
  77. [    1.840374] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  78. [    1.840393] ehci_hcd 0000:00:16.2: debug port 1
  79. [    1.840404] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb44000
  80. [    1.852070] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
  81. [    1.852239] hub 3-0:1.0: USB hub found
  82. [    1.852242] hub 3-0:1.0: 4 ports detected
  83. [    1.852311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  84. [    1.852335] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  85. [    1.852347] ohci_hcd 0000:00:12.0: setting latency timer to 64
  86. [    1.852350] ohci_hcd 0000:00:12.0: OHCI Host Controller
  87. [    1.852396] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
  88. [    1.852414] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4a000
  89. [    1.912167] hub 4-0:1.0: USB hub found
  90. [    1.912186] hub 4-0:1.0: 5 ports detected
  91. [    1.912235] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  92. [    1.912248] ohci_hcd 0000:00:13.0: setting latency timer to 64
  93. [    1.912252] ohci_hcd 0000:00:13.0: OHCI Host Controller
  94. [    1.912299] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
  95. [    1.912311] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb48000
  96. [    1.972160] hub 5-0:1.0: USB hub found
  97. [    1.972180] hub 5-0:1.0: 5 ports detected
  98. [    1.972246] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  99. [    1.972258] ohci_hcd 0000:00:14.5: setting latency timer to 64
  100. [    1.972261] ohci_hcd 0000:00:14.5: OHCI Host Controller
  101. [    1.972310] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
  102. [    1.972323] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb46000
  103. [    2.032173] hub 6-0:1.0: USB hub found
  104. [    2.032192] hub 6-0:1.0: 2 ports detected
  105. [    2.032246] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  106. [    2.032260] ohci_hcd 0000:00:16.0: setting latency timer to 64
  107. [    2.032263] ohci_hcd 0000:00:16.0: OHCI Host Controller
  108. [    2.032325] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
  109. [    2.032336] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb45000
  110. [    2.092164] hub 7-0:1.0: USB hub found
  111. [    2.092183] hub 7-0:1.0: 4 ports detected
  112. [    2.092233] uhci_hcd: USB Universal Host Controller Interface driver
  113. [    2.092308] usbcore: registered new interface driver libusual
  114. [    2.092344] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  115. [    2.092346] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  116. [    2.092525] serio: i8042 KBD port at 0x60,0x64 irq 1
  117. [    2.092639] mousedev: PS/2 mouse device common for all mice
  118. [    2.092791] rtc_cmos 00:06: RTC can wake from S4
  119. [    2.092888] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  120. [    2.092909] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  121. [    2.092986] device-mapper: uevent: version 1.0.3
  122. [    2.093068] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  123. [    2.093156] cpuidle: using governor ladder
  124. [    2.093281] cpuidle: using governor menu
  125. [    2.093283] EFI Variables Facility v0.08 2004-May-17
  126. [    2.093503] TCP cubic registered
  127. [    2.093598] NET: Registered protocol family 10
  128. [    2.094064] NET: Registered protocol family 17
  129. [    2.094078] Registering the dns_resolver key type
  130. [    2.094237] PM: Hibernation image not present or could not be loaded.
  131. [    2.094248] registered taskstats version 1
  132. [    2.113876]   Magic number: 4:431:681
  133. [    2.113985] rtc_cmos 00:06: setting system clock to 2012-07-15 11:40:25 UTC (1342352425)
  134. [    2.114022] powernow-k8: Found 1 AMD A6-3600 APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
  135. [    2.114046] powernow-k8: Core Performance Boosting: on.
  136. [    2.114114] powernow-k8:    0 : pstate 0 (2100 MHz)
  137. [    2.114116] powernow-k8:    1 : pstate 1 (1900 MHz)
  138. [    2.114118] powernow-k8:    2 : pstate 2 (1600 MHz)
  139. [    2.114122] powernow-k8:    3 : pstate 3 (1400 MHz)
  140. [    2.114124] powernow-k8:    4 : pstate 4 (1200 MHz)
  141. [    2.114125] powernow-k8:    5 : pstate 5 (1000 MHz)
  142. [    2.114127] powernow-k8:    6 : pstate 6 (800 MHz)
  143. [    2.114564] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  144. [    2.114567] EDD information not available.
  145. [    2.152105] usb 2-1: new high-speed USB device number 2 using ehci_hcd
  146. [    2.308045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  147. [    2.308081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  148. [    2.309176] ata1.00: ATA-8: Hitachi HDS721010CLA632, JP4OA41A, max UDMA/133
  149. [    2.309185] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  150. [    2.310411] ata1.00: configured for UDMA/133
  151. [    2.310715] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
  152. [    2.310926] sd 0:0:0:0: Attached scsi generic sg0 type 0
  153. [    2.310982] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  154. [    2.311132] sd 0:0:0:0: [sda] Write Protect is off
  155. [    2.311137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  156. [    2.311193] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  157. [    2.311663] ata2.00: ATAPI: hp      DVDRAM GT30N, R5ND, max UDMA/100
  158. [    2.315704] ata2.00: configured for UDMA/100
  159. [    2.318772] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT30N     R5ND PQ: 0 ANSI: 5
  160. [    2.322956] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  161. [    2.322963] cdrom: Uniform CD-ROM driver Revision: 3.20
  162. [    2.323167] sr 1:0:0:0: Attached scsi CD-ROM sr0
  163. [    2.323240] sr 1:0:0:0: Attached scsi generic sg1 type 5
  164. [    2.330288]  sda: sda1 sda2 sda3 sda4
  165. [    2.330948] sd 0:0:0:0: [sda] Attached SCSI disk
  166. [    2.332576] Freeing unused kernel memory: 920k freed
  167. [    2.332813] Write protecting the kernel read-only data: 12288k
  168. [    2.338294] Freeing unused kernel memory: 1608k freed
  169. [    2.342736] Freeing unused kernel memory: 1196k freed
  170. [    2.360279] udevd[96]: starting version 175
  171. [    2.413097] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  172. [    2.413121] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  173. [    2.413171] r8169 0000:01:00.0: setting latency timer to 64
  174. [    2.413489] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
  175. [    2.413915] r8169 0000:01:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c7c000, 38:60:77:9f:37:16, XID 0c900800 IRQ 43
  176. [    2.413919] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  177. [    2.528043] Refined TSC clocksource calibration: 2096.187 MHz.
  178. [    2.528057] Switching to clocksource tsc
  179. [    2.996440] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
  180. [    3.016076] usb 5-4: new full-speed USB device number 2 using ohci_hcd
  181. [    3.456043] usb 7-4: new low-speed USB device number 2 using ohci_hcd
  182. [    3.932087] usb 6-1: new full-speed USB device number 2 using ohci_hcd
  183. [    9.272432] ADDRCONF(NETDEV_UP): eth0: link is not ready
  184. [    9.293789] udevd[399]: starting version 175
  185. [    9.315740] lp: driver loaded but no devices found
  186. [    9.331483] [drm] Initialized drm 1.1.0 20060810
  187. [    9.341860] type=1400 audit(1342366832.724:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=444 comm="apparmor_parser"
  188. [    9.342417] type=1400 audit(1342366832.724:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=444 comm="apparmor_parser"
  189. [    9.342706] type=1400 audit(1342366832.724:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
  190. [    9.354710] [drm] radeon defaulting to kernel modesetting.
  191. [    9.354714] [drm] radeon kernel modesetting enabled.
  192. [    9.354757] checking generic (a0000 e000) vs hw (c0000000 10000000)
  193. [    9.354759] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
  194. [    9.354782] Console: switching to colour dummy device 80x25
  195. [    9.355851] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  196. [    9.355857] radeon 0000:00:01.0: setting latency timer to 64
  197. [    9.356193] [drm] initializing kernel modesetting (SUMO 0x1002:0x964A 0x103C:0x2ACB).
  198. [    9.356251] [drm] register mmio base: 0xFEB00000
  199. [    9.356253] [drm] register mmio size: 262144
  200. [    9.356375] ATOM BIOS: HP
  201. [    9.356407] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
  202. [    9.356411] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
  203. [    9.357204] [drm] Detected VRAM RAM=512M, BAR=256M
  204. [    9.357209] [drm] RAM width 32bits DDR
  205. [    9.357322] [TTM] Zone  kernel: Available graphics memory: 2792428 kiB.
  206. [    9.357325] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
  207. [    9.357327] [TTM] Initializing pool allocator.
  208. [    9.357361] [drm] radeon: 512M of VRAM memory ready
  209. [    9.357363] [drm] radeon: 512M of GTT memory ready.
  210. [    9.357392] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  211. [    9.357394] [drm] Driver supports precise vblank timestamp query.
  212. [    9.357437] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
  213. [    9.357443] radeon 0000:00:01.0: radeon: using MSI.
  214. [    9.357476] [drm] radeon: irq initialized.
  215. [    9.357481] [drm] GART: num cpu pages 131072, num gpu pages 131072
  216. [    9.358992] [drm] Loading SUMO Microcode
  217. [    9.359612] cfg80211: Calling CRDA to update world regulatory domain
  218. [    9.389809] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  219. [    9.406169] rt2800pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  220. [    9.406181] rt2800pci 0000:02:00.0: setting latency timer to 64
  221. [    9.408092] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  222. [    9.408095] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  223. [    9.408098] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  224. [    9.408101] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  225. [    9.408103] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  226. [    9.408106] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  227. [    9.408108] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  228. [    9.408111] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  229. [    9.408113] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  230. [    9.408116] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  231. [    9.408118] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  232. [    9.408121] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  233. [    9.408124] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  234. [    9.408126] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  235. [    9.408129] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  236. [    9.408131] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  237. [    9.408134] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  238. [    9.408137] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  239. [    9.408139] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  240. [    9.408142] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  241. [    9.408144] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  242. [    9.408147] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  243. [    9.408149] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  244. [    9.408152] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
  245. [    9.408154] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  246. [    9.408157] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
  247. [    9.408160] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  248. [    9.408162] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
  249. [    9.410619] acpi device:3d: registered as cooling_device4
  250. [    9.410690] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input2
  251. [    9.410748] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  252. [    9.411363] wmi: Mapper loaded
  253. [    9.424651] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  254. [    9.425758] Registered led device: rt2800pci-phy0::radio
  255. [    9.425850] Registered led device: rt2800pci-phy0::assoc
  256. [    9.425868] Registered led device: rt2800pci-phy0::quality
  257. [    9.446366] Linux video capture interface: v2.00
  258. [    9.446904] uvcvideo: Found UVC 1.00 device HP High Definition 1MP Webcam (04f2:b2a3)
  259. [    9.447220] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.0/input/input3
  260. [    9.447326] generic-usb 0003:04F2:0981.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Wireless Device] on usb-0000:00:13.0-4/input0
  261. [    9.456440] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.1/input/input4
  262. [    9.456657] generic-usb 0003:04F2:0981.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony Wireless Device] on usb-0000:00:13.0-4/input1
  263. [    9.460374] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.2/input/input5
  264. [    9.460487] generic-usb 0003:04F2:0981.0003: input,hidraw2: USB HID v1.11 Mouse [Chicony Wireless Device] on usb-0000:00:13.0-4/input2
  265. [    9.465476] input: Razer Razer 1600dpi Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-4/7-4:1.0/input/input6
  266. [    9.465601] input: HP High Definition 1MP Webcam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7
  267. [    9.465667] generic-usb 0003:1532:0001.0004: input,hidraw3: USB HID v1.10 Mouse [Razer Razer 1600dpi Mouse] on usb-0000:00:16.0-4/input0
  268. [    9.465992] usbcore: registered new interface driver uvcvideo
  269. [    9.465994] USB Video Class driver (1.1.1)
  270. [    9.470276] generic-usb 0003:1926:0DBC.0005: hiddev0,hidraw4: USB HID v1.11 Device [NextWindow Touchscreen] on usb-0000:00:14.5-1/input1
  271. [    9.470314] usbcore: registered new interface driver usbhid
  272. [    9.470317] usbhid: USB HID core driver
  273. [    9.587155] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  274. [    9.587159] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  275. [    9.587162] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  276. [    9.587165] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  277. [    9.587168] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  278. [    9.587170] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  279. [    9.587172] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  280. [    9.587175] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  281. [    9.587177] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  282. [    9.587180] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  283. [    9.587182] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  284. [    9.587185] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  285. [    9.587187] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  286. [    9.587189] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  287. [    9.587192] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  288. [    9.587194] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  289. [    9.587196] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  290. [    9.587199] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  291. [    9.587201] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  292. [    9.587204] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  293. [    9.587206] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  294. [    9.587209] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  295. [    9.587211] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  296. [    9.587214] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  297. [    9.587216] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  298. [    9.587218] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  299. [    9.587221] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  300. [    9.587223] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  301. [    9.587226] cfg80211: World regulatory domain updated:
  302. [    9.587228] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  303. [    9.587231] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  304. [    9.587233] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  305. [    9.587235] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  306. [    9.587238] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  307. [    9.587240] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  308. [    9.611484] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
  309. [    9.611610] radeon 0000:00:01.0: WB enabled
  310. [    9.627856] [drm] ring test succeeded in 1 usecs
  311. [    9.627984] [drm] radeon: ib pool ready.
  312. [    9.628118] [drm] ib test succeeded in 0 usecs
  313. [    9.629850] [drm] Radeon Display Connectors
  314. [    9.629852] [drm] Connector 0:
  315. [    9.629854] [drm]   LVDS
  316. [    9.629855] [drm]   HPD2
  317. [    9.629860] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
  318. [    9.629861] [drm]   Encoders:
  319. [    9.629863] [drm]     LCD1: INTERNAL_UNIPHY2
  320. [    9.629864] [drm]     LCD1: TRAVIS
  321. [    9.629866] [drm] Connector 1:
  322. [    9.629867] [drm]   DVI-D
  323. [    9.629868] [drm]   HPD1
  324. [    9.629870] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
  325. [    9.629871] [drm]   Encoders:
  326. [    9.629873] [drm]     DFP1: INTERNAL_UNIPHY2
  327. [    9.639404] [drm] Internal thermal controller without fan control
  328. [    9.639463] [drm] radeon: power management initialized
  329. [    9.663988] composite sync not supported
  330. [    9.762707] [drm] fb mappable at 0xC0142000
  331. [    9.762709] [drm] vram apper at 0xC0000000
  332. [    9.762710] [drm] size 5787648
  333. [    9.762712] [drm] fb depth is 24
  334. [    9.762713] [drm]    pitch is 6400
  335. [    9.762840] fbcon: radeondrmfb (fb0) is primary device
  336. [    9.762986] Console: switching to colour frame buffer device 200x56
  337. [    9.763018] fb0: radeondrmfb frame buffer device
  338. [    9.763020] drm: registered panic notifier
  339. [    9.763026] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0
  340. [    9.763172] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
  341. [    9.763908] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  342. [    9.763963] snd_hda_intel 0000:00:14.2: setting latency timer to 64
  343. [    9.766505] composite sync not supported
  344. [    9.816273] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
  345. [    9.816370] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
  346. [    9.816433] input: HD-Audio Generic Line-Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
  347. [   10.474152] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k
  348. [   10.494739] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
  349. [   10.605202] ppdev: user-space parallel port driver
  350. [   10.621674] Bluetooth: Core ver 2.16
  351. [   10.621701] NET: Registered protocol family 31
  352. [   10.621704] Bluetooth: HCI device and connection manager initialized
  353. [   10.621708] Bluetooth: HCI socket layer initialized
  354. [   10.621710] Bluetooth: L2CAP socket layer initialized
  355. [   10.622002] Bluetooth: SCO socket layer initialized
  356. [   10.622479] type=1400 audit(1342366834.004:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=822 comm="apparmor_parser"
  357. [   10.623128] type=1400 audit(1342366834.004:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=822 comm="apparmor_parser"
  358. [   10.626047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  359. [   10.626051] Bluetooth: BNEP filters: protocol multicast
  360. [   10.627507] Bluetooth: RFCOMM TTY layer initialized
  361. [   10.627515] Bluetooth: RFCOMM socket layer initialized
  362. [   10.627517] Bluetooth: RFCOMM ver 1.11
  363. [   10.809108] r8169 0000:01:00.0: eth0: link down
  364. [   10.809943] ADDRCONF(NETDEV_UP): eth0: link is not ready
  365. [   10.810304] ADDRCONF(NETDEV_UP): eth0: link is not ready
  366. [   10.860976] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  367. [   10.862154] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  368. [   13.908098] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  369. [   14.108072] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  370. [   14.308072] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  371. [   14.508067] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  372. [   20.656096] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  373. [   20.856067] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  374. [   21.056070] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  375. [   21.256066] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  376. [   27.412101] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  377. [   27.612069] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  378. [   27.812076] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  379. [   28.012066] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  380. [   34.164109] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  381. [   34.364071] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  382. [   34.564072] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  383. [   34.764066] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  384. [   40.912099] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  385. [   41.112071] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  386. [   41.312070] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  387. [   41.512068] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  388. [   47.664096] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  389. [   47.864071] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  390. [   48.064070] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  391. [   48.264067] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  392. [   54.408099] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  393. [   54.608069] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  394. [   54.808071] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  395. [   55.008070] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  396. [   61.192103] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  397. [   61.392073] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  398. [   61.592072] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  399. [   61.792077] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  400. [   67.948098] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  401. [   68.148042] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  402. [   68.348023] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  403. [   68.548070] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  404. [  130.643570] type=1400 audit(1342366954.024:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=899 comm="apparmor_parser"
  405. [  130.643703] type=1400 audit(1342366954.024:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
  406. [  130.645525] type=1400 audit(1342366954.028:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=903 comm="apparmor_parser"
  407. [  130.646150] type=1400 audit(1342366954.028:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=903 comm="apparmor_parser"
  408. [  130.646275] type=1400 audit(1342366954.028:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
  409. [  130.646569] type=1400 audit(1342366954.028:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"
  410. [  130.647060] type=1400 audit(1342366954.028:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=904 comm="apparmor_parser"
  411. [  130.647714] type=1400 audit(1342366954.028:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=904 comm="apparmor_parser"
  412. [  130.649476] type=1400 audit(1342366954.032:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=906 comm="apparmor_parser"
  413. [  130.651471] type=1400 audit(1342366954.032:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=901 comm="apparmor_parser"
  414. [  130.805213] composite sync not supported
  415. [  130.999395] composite sync not supported
  416. [  131.571918] composite sync not supported
  417. [  134.416145] composite sync not supported
  418. [  136.759638] composite sync not supported
  419. [  137.117104] composite sync not supported
  420. [  137.816755] composite sync not supported
  421. [  139.340053] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  422. [  139.540026] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  423. [  139.740028] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  424. [  139.745450] composite sync not supported
  425. [  139.940035] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  426. [  152.228116] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  427. [  152.428091] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  428. [  152.628092] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  429. [  152.828085] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  430. [  153.156652] audit_printk_skb: 21 callbacks suppressed
  431. [  153.156657] type=1400 audit(1342366976.540:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1793 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
  432. [  157.987499] composite sync not supported
  433. [  158.988126] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  434. [  159.188088] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  435. [  159.388091] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  436. [  159.588089] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  437. [  165.748099] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  438. [  165.948026] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  439. [  166.148079] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  440. [  166.348074] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  441. [  184.820124] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  442. [  185.020085] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  443. [  185.220090] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  444. [  185.420076] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  445. [  191.636101] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  446. [  191.836041] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  447. [  192.036060] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  448. [  192.236042] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  449. [  202.176085] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  450. [  202.376045] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  451. [  202.576130] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  452. [  202.780034] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  453. [  208.976152] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  454. [  209.180088] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  455. [  209.380080] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  456. [  209.580089] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  457. [  221.884120] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  458. [  222.084102] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  459. [  222.284086] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  460. [  222.484085] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  461. [  228.636080] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  462. [  228.836032] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  463. [  229.036086] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  464. [  229.236066] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  465. [  241.536196] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  466. [  241.736094] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  467. [  241.936078] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  468. [  242.136075] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  469. [  254.440101] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  470. [  254.640089] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  471. [  254.840086] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  472. [  255.040083] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  473. [  265.944097] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  474. [  266.144097] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  475. [  266.344079] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  476. [  266.544076] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  477. [  291.104117] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  478. [  291.304089] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  479. [  291.504091] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  480. [  291.704081] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  481. [  297.876104] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  482. [  298.076093] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  483. [  298.276082] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  484. [  298.476088] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  485. [  305.014468] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  486. [  308.108074] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  487. [  308.308079] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  488. [  308.508075] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  489. [  308.708087] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  490. [  320.996117] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  491. [  321.196092] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  492. [  321.396089] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  493. [  321.596082] wlan0: direct probe to c0:c1:c0:39:61:21 timed out
  494. [  327.756119] wlan0: direct probe to c0:c1:c0:39:61:21 (try 1/3)
  495. [  327.956084] wlan0: direct probe to c0:c1:c0:39:61:21 (try 2/3)
  496. [  328.156062] wlan0: direct probe to c0:c1:c0:39:61:21 (try 3/3)
  497. [  328.160722] wlan0: direct probe responded
  498. [  328.212080] wlan0: authenticate with c0:c1:c0:39:61:21 (try 1)
  499. [  328.306253] wlan0: authenticated
  500. [  328.320090] wlan0: associate with c0:c1:c0:39:61:21 (try 1)
  501. [  328.410938] wlan0: RX AssocResp from c0:c1:c0:39:61:21 (capab=0x411 status=0 aid=10)
  502. [  328.410949] wlan0: associated
  503. [  328.418103] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  504. [  336.737321] ADDRCONF(NETDEV_UP): eth0: link is not ready
  505. [  340.584072] wlan0: no IPv6 routers present
RAW Paste Data
Pastebin PRO WINTER Special!
Get 40% OFF Pastebin PRO accounts!
Top