Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:48:18)
- Trying to boot from MMC1
- U-Boot 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:48:18 +0200), Build: jenkins-u-boot-imx6-variant=emmc-2
- CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz)
- CPU: Commercial temperature grade (0C to 95C) at 46C
- Reset cause: POR
- Board: MX6 HummingBoard2
- Watchdog enabled
- DRAM: 1 GiB
- MMC: FSL_SDHC: 0, FSL_SDHC: 1
- No panel detected: default to HDMI
- Display: HDMI (1024x768)
- In: serial
- Out: serial
- Err: serial
- Net: FEC
- Hit any key to stop autoboot: 0
- MMC: no card present
- mmc_init: -123, time 2
- ** Bad device mmc 0 **
- switch to partitions #0, OK
- mmc1(part 0) is current device
- Scanning mmc 1:1...
- MMC: no card present
- mmc_init: -123, time 2
- starting USB...
- USB0: Port not available.
- USB1: USB EHCI 1.00
- scanning bus 1 for devices...
- U-Boot SPL 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:48:18)
- Trying to boot from MMC1
- U-Boot 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:48:18 +0200), Build: jenkins-u-boot-imx6-variant=emmc-2
- CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz)
- CPU: Commercial temperature grade (0C to 95C) at 49C
- Reset cause: POR
- Board: MX6 HummingBoard2
- Watchdog enabled
- DRAM: 1 GiB
- MMC: FSL_SDHC: 0, FSL_SDHC: 1
- No panel detected: default to HDMI
- Display: HDMI (1024x768)
- In: serial
- Out: serial
- Err: serial
- Net: FEC
- Hit any key to stop autoboot: 0
- => mmc info
- MMC: no card present
- mmc_init: -123, time 1
- => mmc dev 1
- switch to partitions #0, OK
- mmc1(part 0) is current device
- => mmc info
- Device: FSL_SDHC
- Manufacturer ID: 15
- OEM: 100
- Name: 8GTF4
- Tran Speed: 52000000
- Rd Block Len: 512
- MMC version 5.1
- High Capacity: Yes
- Capacity: 7.3 GiB
- Bus Width: 8-bit
- Erase Group Size: 512 KiB
- HC WP Group Size: 8 MiB
- User Capacity: 7.3 GiB WRREL
- Boot Capacity: 4 MiB ENH
- RPMB Capacity: 512 KiB ENH
- =>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement