API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 11th, 2017
555
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.47 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.9.36-ti-rt-r45 (root@a2-imx6q-wandboard-2gb) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP PREEMPT RT Fri Jul 7 21:39:34 UTC 2017
  3. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black
  6. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000
  7. [ 0.000000] Memory policy: Data cache writeback
  8. [ 0.000000] On node 0 totalpages: 130560
  9. [ 0.000000] free_area_init_node: node 0, pgdat c13e5f40, node_mem_map df961000
  10. [ 0.000000] Normal zone: 1148 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 130560 pages, LIFO batch:31
  13. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  14. [ 0.000000] AM335X ES2.1 (sgx neon)
  15. [ 0.000000] percpu: Embedded 16 pages/cpu @df92b000 s33568 r8192 d23776 u65536
  16. [ 0.000000] pcpu-alloc: s33568 r8192 d23776 u65536 alloc=16*4096
  17. [ 0.000000] pcpu-alloc: [0] 0
  18. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129412
  19. [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=0e71d59c-6852-49b0-92b3-1769eaed1c2e ro rootfstype=ext4 rootwait
  20. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  21. [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
  22. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  23. [ 0.000000] Memory: 440480K/522240K available (12288K kernel code, 1034K rwdata, 4196K rodata, 1024K init, 791K bss, 32608K reserved, 49152K cma-reserved, 0K highmem)
  24. [ 0.000000] Virtual kernel memory layout:
  25. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  26. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  27. vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
  28. lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
  29. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  30. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  31. .text : 0xc0008000 - 0xc0d00000 (13280 kB)
  32. .init : 0xc1200000 - 0xc1300000 (1024 kB)
  33. .data : 0xc1300000 - 0xc1402b08 (1035 kB)
  34. .bss : 0xc1404000 - 0xc14c9f5c ( 792 kB)
  35. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  36. [ 0.000000] Preemptible hierarchical RCU implementation.
  37. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  38. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  39. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
  40. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  42. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  43. [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  44. [ 0.000030] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  45. [ 0.000038] OMAP clocksource: timer1 at 24000000 Hz
  46. [ 0.000823] clocksource_probe: no matching clocksources found
  47. [ 0.001044] Console: colour dummy device 80x30
  48. [ 0.001204] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
  49. [ 0.001207] This ensures that you still see kernel messages. Please
  50. [ 0.001210] update your kernel commandline.
  51. [ 0.046729] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
  52. [ 0.046750] pid_max: default: 32768 minimum: 301
  53. [ 0.047031] Security Framework initialized
  54. [ 0.047039] Yama: becoming mindful.
  55. [ 0.047071] AppArmor: AppArmor disabled by boot time parameter
  56. [ 0.047265] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  57. [ 0.047273] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  58. [ 0.048624] CPU: Testing write buffer coherency: ok
  59. [ 0.048634] ftrace: allocating 37717 entries in 111 pages
  60. [ 0.164707] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  61. [ 0.164827] Setting up static identity map for 0x80100000 - 0x80100060
  62. [ 0.226793] Brought up 1 CPUs
  63. [ 0.226822] SMP: Total of 1 processors activated (995.32 BogoMIPS).
  64. [ 0.226833] CPU: All CPU(s) started in SVC mode.
  65. [ 0.228583] devtmpfs: initialized
  66. [ 0.255096] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  67. [ 0.255763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  68. [ 0.255799] futex hash table entries: 256 (order: 2, 16384 bytes)
  69. [ 0.259653] xor: measuring software checksum speed
  70. [ 0.298826] arm4regs : 1204.000 MB/sec
  71. [ 0.338769] 8regs : 1080.000 MB/sec
  72. [ 0.378770] 32regs : 1078.000 MB/sec
  73. [ 0.418764] neon : 1643.000 MB/sec
  74. [ 0.418775] xor: using function: neon (1643.000 MB/sec)
  75. [ 0.418799] pinctrl core: initialized pinctrl subsystem
  76. [ 0.420701] NET: Registered protocol family 16
  77. [ 0.425895] DMA: preallocated 256 KiB pool for atomic coherent allocations
  78. [ 0.452146] omap_hwmod: debugss: _wait_target_disable failed
  79. [ 0.493961] cpuidle: using governor ladder
  80. [ 0.494016] cpuidle: using governor menu
  81. [ 0.504415] OMAP GPIO hardware version 0.1
  82. [ 0.527870] No ATAGs?
  83. [ 0.527901] hw-breakpoint: debug architecture 0x4 unsupported.
  84. [ 0.528180] omap4_sram_init:Unable to allocate sram needed to handle errata I688
  85. [ 0.528194] omap4_sram_init:Unable to get sram pool needed to handle errata I688
  86. [ 0.630888] raid6: int32x1 gen() 255 MB/s
  87. [ 0.698823] raid6: int32x1 xor() 223 MB/s
  88. [ 0.766779] raid6: int32x2 gen() 320 MB/s
  89. [ 0.834812] raid6: int32x2 xor() 276 MB/s
  90. [ 0.902918] raid6: int32x4 gen() 329 MB/s
  91. [ 0.970806] raid6: int32x4 xor() 267 MB/s
  92. [ 1.038904] raid6: int32x8 gen() 293 MB/s
  93. [ 1.106783] raid6: int32x8 xor() 223 MB/s
  94. [ 1.174795] raid6: neonx1 gen() 1437 MB/s
  95. [ 1.242781] raid6: neonx1 xor() 836 MB/s
  96. [ 1.310784] raid6: neonx2 gen() 1896 MB/s
  97. [ 1.378765] raid6: neonx2 xor() 1162 MB/s
  98. [ 1.446796] raid6: neonx4 gen() 1056 MB/s
  99. [ 1.514790] raid6: neonx4 xor() 653 MB/s
  100. [ 1.582798] raid6: neonx8 gen() 819 MB/s
  101. [ 1.650806] raid6: neonx8 xor() 559 MB/s
  102. [ 1.650817] raid6: using algorithm neonx2 gen() 1896 MB/s
  103. [ 1.650827] raid6: .... xor() 1162 MB/s, rmw enabled
  104. [ 1.650836] raid6: using intx1 recovery algorithm
  105. [ 1.663979] edma 49000000.edma: TI EDMA DMA engine driver
  106. [ 1.668597] vgaarb: loaded
  107. [ 1.669327] SCSI subsystem initialized
  108. [ 1.670990] libata version 3.00 loaded.
  109. [ 1.671410] usbcore: registered new interface driver usbfs
  110. [ 1.671532] usbcore: registered new interface driver hub
  111. [ 1.671687] usbcore: registered new device driver usb
  112. [ 1.672393] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
  113. [ 1.672469] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
  114. [ 1.672599] media: Linux media interface: v0.10
  115. [ 1.672670] Linux video capture interface: v2.00
  116. [ 1.672774] pps_core: LinuxPPS API ver. 1 registered
  117. [ 1.672785] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  118. [ 1.672815] PTP clock support registered
  119. [ 1.673869] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
  120. [ 1.675775] NetLabel: Initializing
  121. [ 1.675796] NetLabel: domain hash size = 128
  122. [ 1.675805] NetLabel: protocols = UNLABELED CIPSOv4
  123. [ 1.675925] NetLabel: unlabeled traffic allowed by default
  124. [ 1.679168] clocksource: Switched to clocksource timer1
  125. [ 1.869705] VFS: Disk quotas dquot_6.6.0
  126. [ 1.869846] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  127. [ 1.888583] NET: Registered protocol family 2
  128. [ 1.889678] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  129. [ 1.889751] TCP bind hash table entries: 4096 (order: 4, 114688 bytes)
  130. [ 1.889954] TCP: Hash tables configured (established 4096 bind 4096)
  131. [ 1.890048] UDP hash table entries: 256 (order: 2, 16384 bytes)
  132. [ 1.890092] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
  133. [ 1.890404] NET: Registered protocol family 1
  134. [ 1.899639] RPC: Registered named UNIX socket transport module.
  135. [ 1.899663] RPC: Registered udp transport module.
  136. [ 1.899673] RPC: Registered tcp transport module.
  137. [ 1.899682] RPC: Registered tcp NFSv4.1 backchannel transport module.
  138. [ 1.899702] PCI: CLS 0 bytes, default 64
  139. [ 1.900445] Unpacking initramfs...
  140. [ 2.447048] Freeing initrd memory: 6680K (cf97a000 - d0000000)
  141. [ 2.447695] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
  142. [ 2.450996] audit: initializing netlink subsys (disabled)
  143. [ 2.451104] audit: type=2000 audit(2.368:1): initialized
  144. [ 2.457101] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  145. [ 2.471132] zbud: loaded
  146. [ 2.480809] NFS: Registering the id_resolver key type
  147. [ 2.480868] Key type id_resolver registered
  148. [ 2.480880] Key type id_legacy registered
  149. [ 2.480905] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  150. [ 2.481339] fuse init (API version 7.26)
  151. [ 2.482715] orangefs_debugfs_init: called with debug mask: :none: :0:
  152. [ 2.483077] orangefs_init: module version upstream loaded
  153. [ 2.483091] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  154. [ 2.504230] Key type asymmetric registered
  155. [ 2.504259] Asymmetric key parser 'x509' registered
  156. [ 2.504694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  157. [ 2.509051] io scheduler noop registered
  158. [ 2.509070] io scheduler deadline registered
  159. [ 2.509703] io scheduler cfq registered (default)
  160. [ 2.511031] pinctrl-single 44e10800.pinmux: please update dts to use #pinctrl-cells = <1>
  161. [ 2.511836] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  162. [ 2.516426] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
  163. [ 2.518055] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  164. [ 2.522471] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
  165. [ 3.401248] console [ttyS0] enabled
  166. [ 3.406515] [drm] Initialized
  167. [ 3.414462] libphy: Fixed MDIO Bus: probed
  168. [ 3.471326] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  169. [ 3.477480] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  170. [ 3.484075] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
  171. [ 3.504602] libphy: 4a101000.mdio: probed
  172. [ 3.508806] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  173. [ 3.519094] cpsw 4a100000.ethernet: Detected MACID = 68:c9:0b:b7:e9:c0
  174. [ 3.525918] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
  175. [ 3.537143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  176. [ 3.543791] ehci-pci: EHCI PCI platform driver
  177. [ 3.548356] ehci-platform: EHCI generic platform driver
  178. [ 3.553846] ehci-omap: OMAP-EHCI Host Controller driver
  179. [ 3.559810] usbcore: registered new interface driver usb-storage
  180. [ 3.568683] 47401300.usb-phy supply vcc not found, using dummy regulator
  181. [ 3.582219] 47401b00.usb-phy supply vcc not found, using dummy regulator
  182. [ 3.593818] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
  183. [ 3.599234] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
  184. [ 3.607008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  185. [ 3.613839] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  186. [ 3.621099] usb usb1: Product: MUSB HDRC host driver
  187. [ 3.626091] usb usb1: Manufacturer: Linux 4.9.36-ti-rt-r45 musb-hcd
  188. [ 3.632392] usb usb1: SerialNumber: musb-hdrc.1
  189. [ 3.638112] hub 1-0:1.0: USB hub found
  190. [ 3.642010] hub 1-0:1.0: 1 port detected
  191. [ 3.659716] mousedev: PS/2 mouse device common for all mice
  192. [ 3.667641] omap_rtc 44e3e000.rtc: already running
  193. [ 3.673114] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  194. [ 3.681950] i2c /dev entries driver
  195. [ 3.687643] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  196. [ 3.696286] cpuidle: enable-method property 'ti,am3352' found operations
  197. [ 3.704299] omap_hsmmc 48060000.mmc: Got CD GPIO
  198. [ 3.789159] hidraw: raw HID events driver (C) Jiri Kosina
  199. [ 3.798614] usbcore: registered new interface driver usbhid
  200. [ 3.807079] usbhid: USB HID core driver
  201. [ 3.811564] remoteproc remoteproc0: wkup_m3 is available
  202. [ 3.820275] NET: Registered protocol family 10
  203. [ 3.830947] mip6: Mobile IPv6
  204. [ 3.833988] NET: Registered protocol family 17
  205. [ 3.838722] Key type dns_resolver registered
  206. [ 3.843094] mpls_gso: MPLS GSO support
  207. [ 3.843829] mmc1: new high speed MMC card at address 0001
  208. [ 3.853622] mmcblk1: mmc1:0001 P1XXXX 3.60 GiB
  209. [ 3.858848] mmcblk1boot0: mmc1:0001 P1XXXX partition 1 16.0 MiB
  210. [ 3.865333] omap_voltage_late_init: Voltage driver support not added
  211. [ 3.871669] mmcblk1boot1: mmc1:0001 P1XXXX partition 2 16.0 MiB
  212. [ 3.873395] mmcblk1: p1
  213. [ 3.886021] PM: Cannot get wkup_m3_ipc handle
  214. [ 3.890590] ThumbEE CPU extension supported.
  215. [ 3.894910] Registering SWP/SWPB emulation handler
  216. [ 3.900964] registered taskstats version 1
  217. [ 3.905243] zswap: loaded using pool lzo/zbud
  218. [ 3.917270] Btrfs loaded, crc32c=crc32c-generic
  219. [ 3.955010] Key type encrypted registered
  220. [ 4.009791] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
  221. [ 4.021141] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  222. [ 4.027129] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  223. [ 4.034209] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  224. [ 4.041975] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  225. [ 4.049460] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  226. [ 4.056838] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  227. [ 4.064224] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  228. [ 4.071239] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
  229. [ 4.078759] remoteproc remoteproc0: powering up wkup_m3
  230. [ 4.084082] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
  231. [ 4.084736] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,EIA0,5115BBBK0079'
  232. [ 4.084757] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
  233. [ 4.108049] remoteproc remoteproc0: remote processor wkup_m3 is now up
  234. [ 4.108091] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
  235. [ 4.121641] bone_capemgr bone_capemgr: slot #0: No cape found
  236. [ 4.155238] bone_capemgr bone_capemgr: slot #1: No cape found
  237. [ 4.164576] random: fast init done
  238. [ 4.187949] bone_capemgr bone_capemgr: slot #2: No cape found
  239. [ 4.220555] bone_capemgr bone_capemgr: slot #3: No cape found
  240. [ 4.226424] bone_capemgr bone_capemgr: initialized OK.
  241. [ 4.234691] PM: bootloader does not support rtc-only!
  242. [ 4.241058] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:01:46 UTC (946684906)
  243. [ 4.249816] of_cfs_init
  244. [ 4.252469] of_cfs_init: OK
  245. [ 4.255817] PM: Hibernation image not present or could not be loaded.
  246. [ 4.258761] Freeing unused kernel memory: 1024K (c1200000 - c1300000)
  247. [ 6.201944] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
  248. [ 6.625606] systemd[1]: System time before build time, advancing clock.
  249. [ 6.728845] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  250. [ 6.748052] systemd[1]: Detected architecture arm.
  251. [ 6.773074] systemd[1]: Set hostname to <arm>.
  252. [ 7.434031] systemd[1]: [/lib/systemd/system/ssh.service:3] Failed to add dependency on rc.local, ignoring: Invalid argument
  253. [ 7.481156] systemd[1]: Listening on Journal Socket.
  254. [ 7.500266] systemd[1]: Listening on Syslog Socket.
  255. [ 7.515893] systemd[1]: Reached target Remote File Systems (Pre).
  256. [ 7.532192] systemd[1]: Listening on fsck to fsckd communication Socket.
  257. [ 7.556172] systemd[1]: Listening on udev Kernel Socket.
  258. [ 7.571892] systemd[1]: Reached target Remote File Systems.
  259. [ 7.973281] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
  260. [ 9.710954] systemd-journald[200]: Received request to flush runtime journal from PID 1
  261. [ 14.076364] Bluetooth: Core ver 2.22
  262. [ 14.076504] NET: Registered protocol family 31
  263. [ 14.076514] Bluetooth: HCI device and connection manager initialized
  264. [ 14.076544] Bluetooth: HCI socket layer initialized
  265. [ 14.076563] Bluetooth: L2CAP socket layer initialized
  266. [ 14.076635] Bluetooth: SCO socket layer initialized
  267. [ 14.120190] net eth0: initializing cpsw version 1.12 (0)
  268. [ 14.120213] net eth0: initialized cpsw ale version 1.4
  269. [ 14.120222] net eth0: ALE Table size 1024
  270. [ 14.192132] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
  271. [ 14.217950] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  272. [ 17.015810] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
  273. [ 17.503793] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  274. [ 17.541124] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  275. [ 17.556762] omap-aes 53500000.aes: will run requests pump with realtime priority
  276. [ 19.116382] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices
  277. [ 19.124585] irq: no irq domain found for /ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 !
  278. [ 19.129421] irq: no irq domain found for /ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 !
  279. [ 19.194659] remoteproc remoteproc1: 4a334000.pru0 is available
  280. [ 19.194810] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a334000 probed successfully
  281. [ 19.200580] remoteproc remoteproc2: 4a338000.pru1 is available
  282. [ 19.200768] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a338000 probed successfully
  283. [ 31.702646] using random self ethernet address
  284. [ 31.702676] using random host ethernet address
  285. [ 31.702694] using host ethernet address: 68:C9:0B:B7:E9:C2
  286. [ 31.702709] using self ethernet address: 68:C9:0B:B7:E9:C1
  287. [ 31.718961] usb0: HOST MAC 68:c9:0b:b7:e9:c2
  288. [ 31.723614] usb0: MAC 68:c9:0b:b7:e9:c1
  289. [ 31.723722] using random self ethernet address
  290. [ 31.723737] using random host ethernet address
  291. [ 31.723921] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  292. [ 31.723934] g_ether gadget: g_ether ready
  293. [ 32.031340] g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
  294. [ 130.620651] pru-rproc 4a338000.pru1: pru_rproc_remove: removing rproc 4a338000.pru1
  295. [ 130.635875] remoteproc remoteproc2: releasing 4a338000.pru1
  296. [ 130.636186] pru-rproc 4a334000.pru0: pru_rproc_remove: removing rproc 4a334000.pru0
  297. [ 130.637148] remoteproc remoteproc1: releasing 4a334000.pru0
  298. [ 136.741101] remoteproc remoteproc1: 4a334000.pru0 is available
  299. [ 136.741321] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a334000 probed successfully
  300. [ 136.749894] remoteproc remoteproc2: 4a338000.pru1 is available
  301. [ 136.750107] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a338000 probed successfully
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!