SHARE
TWEET

Carambola2 reboot-loop in STA/Client mode

a guest Jul 14th, 2019 89 in 139 days
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. #########################################################################################################
  3. ############## First a good boot, with switched on Ap signal.  ##########################################
  4. ############## Then ping google while Ap is swotched off       ##########################################
  5. #########################################################################################################
  6.  
  7.  
  8. U-Boot 1.1.4-g682743ef (Jan 20 2016 - 14:54:16)
  9.  
  10. =====================================
  11. Caraboot v2.3 (AR9331) U-boot
  12. http://www.8devices.com/
  13. -------------------------------------
  14. DRAM:  64 MB
  15. Flash: 16 MB
  16. Net:   eth0, eth1
  17. =====================================
  18.  
  19. Hit '<ESC>' key(s) to stop autoboot:  1  0
  20. ## Booting image at 9f050000 ...
  21.    Image Name:   MIPS OpenWrt Linux-4.9.184
  22.    Created:      2019-06-27  12:18:52 UTC
  23.    Image Type:   MIPS Linux Kernel Image (lzma compressed)
  24.    Data Size:    1378284 Bytes =  1.3 MB
  25.    Load Address: 80060000
  26.    Entry Point:  80060000
  27.    Verifying Checksum at 0x9f050040 ...OK
  28.    Uncompressing Kernel Image ... OK
  29.  
  30. Starting kernel ...
  31.  
  32. [    0.000000] Linux version 4.9.184 (buildbot@2ccc8102e0c3) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7808-ef686b7292) ) #0 Thu Jun 27 12:18:52 2019
  33. [    0.000000] bootconsole [early0] enabled
  34. [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  35. [    0.000000] SoC: Atheros AR9330 rev 1
  36. [    0.000000] Determined physical RAM map:
  37. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  38. [    0.000000] Initrd not found or empty - disabling initrd
  39. [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  40. [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  41. [    0.000000] Zone ranges:
  42. [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
  43. [    0.000000] Movable zone start for each node
  44. [    0.000000] Early memory node ranges
  45. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
  46. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  47. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  48. [    0.000000] Kernel command line:  board=CARAMBOLA2 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro console=ttyATH0,115200 rootfstype=squashfs noinitrd
  49. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  50. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  51. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  52. [    0.000000] Writing ErrCtl register=00000000
  53. [    0.000000] Readback ErrCtl register=00000000
  54. [    0.000000] Memory: 59964K/65536K available (3393K kernel code, 178K rwdata, 448K rodata, 324K init, 211K bss, 5572K reserved, 0K cma-reserved)
  55. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  56. [    0.000000] NR_IRQS:51
  57. [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
  58. [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  59. [    0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
  60. [    0.007910] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  61. [    0.089132] pid_max: default: 32768 minimum: 301
  62. [    0.093909] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  63. [    0.100354] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  64. [    0.111436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  65. [    0.119816] futex hash table entries: 256 (order: -1, 3072 bytes)
  66. [    0.127766] NET: Registered protocol family 16
  67. [    0.132863] MIPS: machine is 8devices Carambola2 board
  68. [    0.675996] clocksource: Switched to clocksource MIPS
  69. [    0.681161] NET: Registered protocol family 2
  70. [    0.685412] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  71. [    0.691096] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  72. [    0.697412] TCP: Hash tables configured (established 1024 bind 1024)
  73. [    0.703850] UDP hash table entries: 256 (order: 0, 4096 bytes)
  74. [    0.709580] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  75. [    0.716133] NET: Registered protocol family 1
  76. [    0.725207] Crashlog allocated RAM at address 0x3f00000
  77. [    0.730674] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  78. [    0.746073] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  79. [    0.750444] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  80. [    0.773436] io scheduler noop registered
  81. [    0.775904] io scheduler deadline registered (default)
  82. [    0.781668] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  83. [    0.791351] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a AR933X UART
  84. [    0.799726] console [ttyATH0] enabled
  85. [    0.799726] console [ttyATH0] enabled
  86. [    0.806334] bootconsole [early0] disabled
  87. [    0.806334] bootconsole [early0] disabled
  88. [    0.822613] m25p80 spi0.0: found w25q128, expected m25p80
  89. [    0.837516] m25p80 spi0.0: w25q128 (16384 Kbytes)
  90. [    0.840794] 4 cmdlinepart partitions found on MTD device spi0.0
  91. [    0.846689] Creating 4 MTD partitions on "spi0.0":
  92. [    0.851460] 0x000000000000-0x000000040000 : "u-boot"
  93. [    0.859161] 0x000000040000-0x000000050000 : "u-boot-env"
  94. [    0.865915] 0x000000050000-0x000000ff0000 : "firmware"
  95. [    0.892277] 2 uimage-fw partitions found on MTD device firmware
  96. [    0.896800] 0x000000050000-0x0000001b0000 : "kernel"
  97. [    0.903761] 0x0000001b0000-0x000000ff0000 : "rootfs"
  98. [    0.909726] mtd: device 4 (rootfs) set to be root filesystem
  99. [    0.913978] 1 squashfs-split partitions found on MTD device rootfs
  100. [    0.920196] 0x000000400000-0x000000ff0000 : "rootfs_data"
  101. [    0.928601] 0x000000ff0000-0x000001000000 : "art"
  102. [    0.936291] libphy: Fixed MDIO Bus: probed
  103. [    0.959370] libphy: ag71xx_mdio: probed
  104. [    1.587485] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
  105. [    1.629559] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
  106. [    2.257713] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
  107. [    2.266459] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  108. [    2.273829] NET: Registered protocol family 10
  109. [    2.282426] NET: Registered protocol family 17
  110. [    2.285482] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  111. [    2.298572] 8021q: 802.1Q VLAN Support v1.8
  112. [    2.304990] hctosys: unable to open rtc device (rtc0)
  113. [    2.315444] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  114. [    2.323615] Freeing unused kernel memory: 324K
  115. [    2.326639] This architecture does not have kernel memory protection.
  116. [    2.556011] random: fast init done
  117. [    3.239072] init: Console is alive
  118. [    3.241312] init: - watchdog -
  119. [    4.514934] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  120. [    4.603835] usbcore: registered new interface driver usbfs
  121. [    4.608066] usbcore: registered new interface driver hub
  122. [    4.613314] usbcore: registered new device driver usb
  123. [    4.625435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  124. [    4.632731] ehci-platform: EHCI generic platform driver
  125. [    4.636705] ehci-platform ehci-platform: EHCI Host Controller
  126. [    4.642289] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  127. [    4.652297] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  128. [    4.686047] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  129. [    4.692165] hub 1-0:1.0: USB hub found
  130. [    4.695029] hub 1-0:1.0: 1 port detected
  131. [    4.699741] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  132. [    4.716414] init: - preinit -
  133. [    5.739603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  134. Press the [f] key and hit [enter] to enter failsafe mode
  135. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  136. [    7.377249] eth0: link up (1000Mbps/Full duplex)
  137. [    7.380448] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  138. [    9.113961] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  139. [    9.130017] mount_root: switching to jffs2 overlay
  140. [    9.172421] urandom-seed: Seeding with /etc/urandom.seed
  141. [    9.454186] eth0: link down
  142. [    9.472541] procd: - early -
  143. [    9.474094] procd: - watchdog -
  144. [   10.159353] procd: - watchdog -
  145. [   10.161404] procd: - ubus -
  146. [   10.302400] random: ubusd: uninitialized urandom read (4 bytes read)
  147. [   10.377720] random: ubusd: uninitialized urandom read (4 bytes read)
  148. [   10.383238] random: ubusd: uninitialized urandom read (4 bytes read)
  149. [   10.390353] procd: - init -
  150. Please press Enter to activate this console.
  151. [   10.872421] kmodloader: loading kernel modules from /etc/modules.d/*
  152. [   10.884028] ip6_tables: (C) 2000-2006 Netfilter Core Team
  153. [   10.903151] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
  154. [   10.909784] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
  155. [   10.920669] ip_tables: (C) 2000-2006 Netfilter Core Team
  156. [   10.936959] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  157. [   11.020329] xt_time: kernel timezone is -0000
  158. [   11.095805] PPP generic driver version 2.4.2
  159. [   11.102289] NET: Registered protocol family 24
  160. [   11.174054] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  161. [   11.220628] kmodloader: done loading kernel modules from /etc/modules.d/*
  162. [   12.789399] urandom_read: 5 callbacks suppressed
  163. [   12.789411] random: jshn: uninitialized urandom read (4 bytes read)
  164. [   12.908905] random: ubusd: uninitialized urandom read (4 bytes read)
  165. [   26.321467] br-lan: port 1(eth0) entered blocking state
  166. [   26.325250] br-lan: port 1(eth0) entered disabled state
  167. [   26.331101] device eth0 entered promiscuous mode
  168. [   26.480326] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  169. [   26.568005] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  170. [   28.004215] eth0: link up (1000Mbps/Full duplex)
  171. [   28.096163] br-lan: port 1(eth0) entered blocking state
  172. [   28.099945] br-lan: port 1(eth0) entered forwarding state
  173. [   28.164537] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  174. [   29.473308] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  175. [   32.294897] wlan0: authenticate with b0:48:7a:f6:80:aa
  176. [   32.310420] wlan0: send auth to b0:48:7a:f6:80:aa (try 1/3)
  177. [   32.331790] wlan0: authenticated
  178. [   32.376128] wlan0: associate with b0:48:7a:f6:80:aa (try 1/3)
  179. [   32.385492] wlan0: RX AssocResp from b0:48:7a:f6:80:aa (capab=0x431 status=0 aid=2)
  180. [   32.392287] wlan0: associated
  181. [   33.399983] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  182.  
  183.  
  184.  
  185. BusyBox v1.28.4 () built-in shell (ash)
  186.  
  187.   _______                     ________        __
  188.  |       |.-----.-----.-----.|  |  |  |.----.|  |_
  189.  |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
  190.  |_______||   __|_____|__|__||________||__|  |____|
  191.           |__| W I R E L E S S   F R E E D O M
  192.  -----------------------------------------------------
  193.  OpenWrt 18.06.4, r7808-ef686b7292
  194.  -----------------------------------------------------
  195. === WARNING! =====================================
  196. There is no root password defined on this device!
  197. Use the "passwd" command to set up a new password
  198. in order to prevent unauthorized SSH logins.
  199. --------------------------------------------------
  200. root@OpenWrt:/#
  201. root@OpenWrt:/# ping google.conm
  202. PING google.com (216.58.214.238): 56 data bytes
  203. 64 bytes from 216.58.214.238: seq=0 ttl=55 time=7.037 ms
  204. 64 bytes from 216.58.214.238: seq=1 ttl=55 time=6.383 ms
  205. 64 bytes from 216.58.214.238: seq=2 ttl=55 time=7.113 ms
  206. 64 bytes from 216.58.214.238: seq=3 ttl=55 time=7.617 ms
  207. 64 bytes from 216.58.214.238: seq=4 ttl=55 time=8.679 ms
  208. 64 bytes from 216.58.214.238: seq=5 ttl=55 time=6.375 ms
  209. 64 bytes from 216.58.214.238: seq=6 ttl=55 time=6.875 ms
  210. 64 bytes from 216.58.214.238: seq=7 ttl=55 time=6.950 ms
  211. 64 bytes from 216.58.214.238: seq=8 ttl=55 time=7.016 ms
  212. 64 bytes from 216.58.214.238: seq=9 ttl=55 time=6.563 ms
  213. 64 bytes from 216.58.214.238: seq=10 ttl=55 time=6.399 ms
  214. ping: sendto: Network unreachable
  215. root@OpenWrt:/#
  216.  
  217.  
  218. #################################################################################################
  219. ############# The Ap is switched off Now, then Carambola2 is rebooting ##########################
  220. #################################################################################################
  221.  
  222.  
  223.  
  224.  
  225. U-Boot 1.1.4-g682743ef (Jan 20 2016 - 14:54:16)
  226.  
  227. =====================================
  228. Caraboot v2.3 (AR9331) U-boot
  229. http://www.8devices.com/
  230. -------------------------------------
  231. DRAM:  64 MB
  232. Flash: 16 MB
  233. Net:   eth0, eth1
  234. =====================================
  235.  
  236. Hit '<ESC>' key(s) to stop autoboot:  1  0
  237. ## Booting image at 9f050000 ...
  238.    Image Name:   MIPS OpenWrt Linux-4.9.184
  239.    Created:      2019-06-27  12:18:52 UTC
  240.    Image Type:   MIPS Linux Kernel Image (lzma compressed)
  241.    Data Size:    1378284 Bytes =  1.3 MB
  242.    Load Address: 80060000
  243.    Entry Point:  80060000
  244.    Verifying Checksum at 0x9f050040 ...OK
  245.    Uncompressing Kernel Image ... OK
  246.  
  247. Starting kernel ...
  248.  
  249. [    0.000000] Linux version 4.9.184 (buildbot@2ccc8102e0c3) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7808-ef686b7292) ) #0 Thu Jun 27 12:18:52 2019
  250. [    0.000000] bootconsole [early0] enabled
  251. [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  252. [    0.000000] SoC: Atheros AR9330 rev 1
  253. [    0.000000] Determined physical RAM map:
  254. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  255. [    0.000000] Initrd not found or empty - disabling initrd
  256. [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  257. [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  258. [    0.000000] Zone ranges:
  259. [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
  260. [    0.000000] Movable zone start for each node
  261. [    0.000000] Early memory node ranges
  262. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
  263. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  264. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  265. [    0.000000] Kernel command line:  board=CARAMBOLA2 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro console=ttyATH0,115200 rootfstype=squashfs noinitrd
  266. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  267. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  268. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  269. [    0.000000] Writing ErrCtl register=00000000
  270. [    0.000000] Readback ErrCtl register=00000000
  271. [    0.000000] Memory: 59964K/65536K available (3393K kernel code, 178K rwdata, 448K rodata, 324K init, 211K bss, 5572K reserved, 0K cma-reserved)
  272. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  273. [    0.000000] NR_IRQS:51
  274. [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
  275. [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  276. [    0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
  277. [    0.007910] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  278. [    0.089132] pid_max: default: 32768 minimum: 301
  279. [    0.093909] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  280. [    0.100354] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  281. [    0.111436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  282. [    0.119816] futex hash table entries: 256 (order: -1, 3072 bytes)
  283. [    0.127766] NET: Registered protocol family 16
  284. [    0.132863] MIPS: machine is 8devices Carambola2 board
  285. [    0.675996] clocksource: Switched to clocksource MIPS
  286. [    0.681161] NET: Registered protocol family 2
  287. [    0.685412] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  288. [    0.691096] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  289. [    0.697412] TCP: Hash tables configured (established 1024 bind 1024)
  290. [    0.703850] UDP hash table entries: 256 (order: 0, 4096 bytes)
  291. [    0.709580] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  292. [    0.716133] NET: Registered protocol family 1
  293. [    0.725207] Crashlog allocated RAM at address 0x3f00000
  294. [    0.730674] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  295. [    0.746073] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  296. [    0.750444] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  297. [    0.773436] io scheduler noop registered
  298. [    0.775904] io scheduler deadline registered (default)
  299. [    0.781668] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  300. [    0.791351] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a AR933X UART
  301. [    0.799726] console [ttyATH0] enabled
  302. [    0.799726] console [ttyATH0] enabled
  303. [    0.806334] bootconsole [early0] disabled
  304. [    0.806334] bootconsole [early0] disabled
  305. [    0.822613] m25p80 spi0.0: found w25q128, expected m25p80
  306. [    0.837516] m25p80 spi0.0: w25q128 (16384 Kbytes)
  307. [    0.840794] 4 cmdlinepart partitions found on MTD device spi0.0
  308. [    0.846689] Creating 4 MTD partitions on "spi0.0":
  309. [    0.851460] 0x000000000000-0x000000040000 : "u-boot"
  310. [    0.859161] 0x000000040000-0x000000050000 : "u-boot-env"
  311. [    0.865915] 0x000000050000-0x000000ff0000 : "firmware"
  312. [    0.892277] 2 uimage-fw partitions found on MTD device firmware
  313. [    0.896800] 0x000000050000-0x0000001b0000 : "kernel"
  314. [    0.903761] 0x0000001b0000-0x000000ff0000 : "rootfs"
  315. [    0.909726] mtd: device 4 (rootfs) set to be root filesystem
  316. [    0.913978] 1 squashfs-split partitions found on MTD device rootfs
  317. [    0.920196] 0x000000400000-0x000000ff0000 : "rootfs_data"
  318. [    0.928601] 0x000000ff0000-0x000001000000 : "art"
  319. [    0.936291] libphy: Fixed MDIO Bus: probed
  320. [    0.959370] libphy: ag71xx_mdio: probed
  321. [    1.587485] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
  322. [    1.629559] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
  323. [    2.257713] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
  324. [    2.266459] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  325. [    2.273829] NET: Registered protocol family 10
  326. [    2.282426] NET: Registered protocol family 17
  327. [    2.285482] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  328. [    2.298572] 8021q: 802.1Q VLAN Support v1.8
  329. [    2.304990] hctosys: unable to open rtc device (rtc0)
  330. [    2.315444] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  331. [    2.323615] Freeing unused kernel memory: 324K
  332. [    2.326639] This architecture does not have kernel memory protection.
  333. [    2.556011] random: fast init done
  334. [    3.239069] init: Console is alive
  335. [    3.241314] init: - watchdog -
  336. [    4.514915] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  337. [    4.603784] usbcore: registered new interface driver usbfs
  338. [    4.608014] usbcore: registered new interface driver hub
  339. [    4.613262] usbcore: registered new device driver usb
  340. [    4.625452] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  341. [    4.632748] ehci-platform: EHCI generic platform driver
  342. [    4.636723] ehci-platform ehci-platform: EHCI Host Controller
  343. [    4.642306] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  344. [    4.652314] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  345. [    4.686047] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  346. [    4.692165] hub 1-0:1.0: USB hub found
  347. [    4.695029] hub 1-0:1.0: 1 port detected
  348. [    4.699745] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  349. [    4.716412] init: - preinit -
  350. [    5.739603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  351. Press the [f] key and hit [enter] to enter failsafe mode
  352. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  353. [    7.377250] eth0: link up (1000Mbps/Full duplex)
  354. [    7.380447] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  355. [    9.113904] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  356. [    9.129972] mount_root: switching to jffs2 overlay
  357. [    9.172432] urandom-seed: Seeding with /etc/urandom.seed
  358. [    9.453957] eth0: link down
  359. [    9.472225] procd: - early -
  360. [    9.473784] procd: - watchdog -
  361. [   10.159437] procd: - watchdog -
  362. [   10.161483] procd: - ubus -
  363. [   10.302397] random: ubusd: uninitialized urandom read (4 bytes read)
  364. [   10.377697] random: ubusd: uninitialized urandom read (4 bytes read)
  365. [   10.383225] random: ubusd: uninitialized urandom read (4 bytes read)
  366. [   10.390401] procd: - init -
  367. Please press Enter to activate this console.
  368. [   10.871764] kmodloader: loading kernel modules from /etc/modules.d/*
  369. [   10.883371] ip6_tables: (C) 2000-2006 Netfilter Core Team
  370. [   10.902600] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
  371. [   10.909228] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
  372. [   10.920052] ip_tables: (C) 2000-2006 Netfilter Core Team
  373. [   10.935947] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  374. [   11.019791] xt_time: kernel timezone is -0000
  375. [   11.099874] PPP generic driver version 2.4.2
  376. [   11.106353] NET: Registered protocol family 24
  377. [   11.181740] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  378. [   11.224643] kmodloader: done loading kernel modules from /etc/modules.d/*
  379. [   12.795881] urandom_read: 5 callbacks suppressed
  380. [   12.795893] random: jshn: uninitialized urandom read (4 bytes read)
  381. [   12.915207] random: ubusd: uninitialized urandom read (4 bytes read)
  382. [   26.340916] br-lan: port 1(eth0) entered blocking state
  383. [   26.344696] br-lan: port 1(eth0) entered disabled state
  384. [   26.350539] device eth0 entered promiscuous mode
  385. [   26.406484] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  386. [   26.494652] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  387. [   27.977352] eth0: link up (1000Mbps/Full duplex)
  388. [   27.980591] br-lan: port 1(eth0) entered blocking state
  389. [   27.985739] br-lan: port 1(eth0) entered forwarding state
  390. [   28.126202] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  391. [   29.363367] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  392. [  107.733082] random: crng init done
  393.  
  394. ############################################################################################
  395. ################# The Ap is still witched off  #############################################
  396. ################# The device rebooting         #############################################
  397. ############################################################################################
  398.  
  399.  
  400. U-Boot 1.1.4-g682743ef (Jan 20 2016 - 14:54:16)
  401.  
  402. =====================================
  403. Caraboot v2.3 (AR9331) U-boot
  404. http://www.8devices.com/
  405. -------------------------------------
  406. DRAM:  64 MB
  407. Flash: 16 MB
  408. Net:   eth0, eth1
  409. =====================================
  410.  
  411. Hit '<ESC>' key(s) to stop autoboot:  1  0
  412. ## Booting image at 9f050000 ...
  413.    Image Name:   MIPS OpenWrt Linux-4.9.184
  414.    Created:      2019-06-27  12:18:52 UTC
  415.    Image Type:   MIPS Linux Kernel Image (lzma compressed)
  416.    Data Size:    1378284 Bytes =  1.3 MB
  417.    Load Address: 80060000
  418.    Entry Point:  80060000
  419.    Verifying Checksum at 0x9f050040 ...OK
  420.    Uncompressing Kernel Image ... OK
  421.  
  422. Starting kernel ...
  423.  
  424. [    0.000000] Linux version 4.9.184 (buildbot@2ccc8102e0c3) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7808-ef686b7292) ) #0 Thu Jun 27 12:18:52 2019
  425. [    0.000000] bootconsole [early0] enabled
  426. [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  427. [    0.000000] SoC: Atheros AR9330 rev 1
  428. [    0.000000] Determined physical RAM map:
  429. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  430. [    0.000000] Initrd not found or empty - disabling initrd
  431. [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  432. [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  433. [    0.000000] Zone ranges:
  434. [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
  435. [    0.000000] Movable zone start for each node
  436. [    0.000000] Early memory node ranges
  437. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
  438. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  439. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  440. [    0.000000] Kernel command line:  board=CARAMBOLA2 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro console=ttyATH0,115200 rootfstype=squashfs noinitrd
  441. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  442. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  443. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  444. [    0.000000] Writing ErrCtl register=00000000
  445. [    0.000000] Readback ErrCtl register=00000000
  446. [    0.000000] Memory: 59964K/65536K available (3393K kernel code, 178K rwdata, 448K rodata, 324K init, 211K bss, 5572K reserved, 0K cma-reserved)
  447. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  448. [    0.000000] NR_IRQS:51
  449. [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
  450. [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  451. [    0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
  452. [    0.007910] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  453. [    0.089132] pid_max: default: 32768 minimum: 301
  454. [    0.093909] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  455. [    0.100354] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  456. [    0.111436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  457. [    0.119816] futex hash table entries: 256 (order: -1, 3072 bytes)
  458. [    0.127766] NET: Registered protocol family 16
  459. [    0.132863] MIPS: machine is 8devices Carambola2 board
  460. [    0.675996] clocksource: Switched to clocksource MIPS
  461. [    0.681161] NET: Registered protocol family 2
  462. [    0.685412] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  463. [    0.691096] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  464. [    0.697412] TCP: Hash tables configured (established 1024 bind 1024)
  465. [    0.703850] UDP hash table entries: 256 (order: 0, 4096 bytes)
  466. [    0.709580] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  467. [    0.716133] NET: Registered protocol family 1
  468. [    0.725207] Crashlog allocated RAM at address 0x3f00000
  469. [    0.730674] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  470. [    0.746073] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  471. [    0.750444] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  472. [    0.773436] io scheduler noop registered
  473. [    0.775904] io scheduler deadline registered (default)
  474. [    0.781668] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  475. [    0.791351] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a AR933X UART
  476. [    0.799726] console [ttyATH0] enabled
  477. [    0.799726] console [ttyATH0] enabled
  478. [    0.806334] bootconsole [early0] disabled
  479. [    0.806334] bootconsole [early0] disabled
  480. [    0.822613] m25p80 spi0.0: found w25q128, expected m25p80
  481. [    0.837498] m25p80 spi0.0: w25q128 (16384 Kbytes)
  482. [    0.840777] 4 cmdlinepart partitions found on MTD device spi0.0
  483. [    0.846673] Creating 4 MTD partitions on "spi0.0":
  484. [    0.851443] 0x000000000000-0x000000040000 : "u-boot"
  485. [    0.859144] 0x000000040000-0x000000050000 : "u-boot-env"
  486. [    0.865898] 0x000000050000-0x000000ff0000 : "firmware"
  487. [    0.892260] 2 uimage-fw partitions found on MTD device firmware
  488. [    0.896784] 0x000000050000-0x0000001b0000 : "kernel"
  489. [    0.903742] 0x0000001b0000-0x000000ff0000 : "rootfs"
  490. [    0.909710] mtd: device 4 (rootfs) set to be root filesystem
  491. [    0.913961] 1 squashfs-split partitions found on MTD device rootfs
  492. [    0.920178] 0x000000400000-0x000000ff0000 : "rootfs_data"
  493. [    0.928585] 0x000000ff0000-0x000001000000 : "art"
  494. [    0.936275] libphy: Fixed MDIO Bus: probed
  495. [    0.959349] libphy: ag71xx_mdio: probed
  496. [    1.587485] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
  497. [    1.629559] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
  498. [    2.257713] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
  499. [    2.266459] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  500. [    2.273829] NET: Registered protocol family 10
  501. [    2.282426] NET: Registered protocol family 17
  502. [    2.285482] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  503. [    2.298572] 8021q: 802.1Q VLAN Support v1.8
  504. [    2.304990] hctosys: unable to open rtc device (rtc0)
  505. [    2.315444] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  506. [    2.323615] Freeing unused kernel memory: 324K
  507. [    2.326639] This architecture does not have kernel memory protection.
  508. [    2.556011] random: fast init done
  509. [    3.239185] init: Console is alive
  510. [    3.241423] init: - watchdog -
  511. [    4.514390] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  512. [    4.603297] usbcore: registered new interface driver usbfs
  513. [    4.607527] usbcore: registered new interface driver hub
  514. [    4.612781] usbcore: registered new device driver usb
  515. [    4.624928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  516. [    4.632223] ehci-platform: EHCI generic platform driver
  517. [    4.636193] ehci-platform ehci-platform: EHCI Host Controller
  518. [    4.641777] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  519. [    4.651787] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  520. [    4.686047] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  521. [    4.692174] hub 1-0:1.0: USB hub found
  522. [    4.695037] hub 1-0:1.0: 1 port detected
  523. [    4.699750] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  524. [    4.716429] init: - preinit -
  525. [    5.739605] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  526. Press the [f] key and hit [enter] to enter failsafe mode
  527. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  528. [    7.377249] eth0: link up (1000Mbps/Full duplex)
  529. [    7.380448] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  530. [    9.113945] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  531. [    9.129993] mount_root: switching to jffs2 overlay
  532. [    9.172305] urandom-seed: Seeding with /etc/urandom.seed
  533. [    9.454441] eth0: link down
  534. [    9.472838] procd: - early -
  535. [    9.474396] procd: - watchdog -
  536. [   10.158599] procd: - watchdog -
  537. [   10.160659] procd: - ubus -
  538. [   10.302073] random: ubusd: uninitialized urandom read (4 bytes read)
  539. [   10.377106] random: ubusd: uninitialized urandom read (4 bytes read)
  540. [   10.382662] random: ubusd: uninitialized urandom read (4 bytes read)
  541. [   10.389812] procd: - init -
  542. Please press Enter to activate this console.
  543. [   10.871206] kmodloader: loading kernel modules from /etc/modules.d/*
  544. [   10.882794] ip6_tables: (C) 2000-2006 Netfilter Core Team
  545. [   10.901866] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
  546. [   10.908498] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
  547. [   10.919397] ip_tables: (C) 2000-2006 Netfilter Core Team
  548. [   10.935405] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  549. [   11.019271] xt_time: kernel timezone is -0000
  550. [   11.098941] PPP generic driver version 2.4.2
  551. [   11.105311] NET: Registered protocol family 24
  552. [   11.180049] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  553. [   11.226285] kmodloader: done loading kernel modules from /etc/modules.d/*
  554. [   12.794885] urandom_read: 5 callbacks suppressed
  555. [   12.794897] random: jshn: uninitialized urandom read (4 bytes read)
  556. [   12.914462] random: ubusd: uninitialized urandom read (4 bytes read)
  557. [   26.331084] br-lan: port 1(eth0) entered blocking state
  558. [   26.334870] br-lan: port 1(eth0) entered disabled state
  559. [   26.340703] device eth0 entered promiscuous mode
  560. [   26.378808] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  561. [   26.555536] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  562. [   28.028518] eth0: link up (1000Mbps/Full duplex)
  563. [   28.031751] br-lan: port 1(eth0) entered blocking state
  564. [   28.036970] br-lan: port 1(eth0) entered forwarding state
  565. [   28.172122] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  566. [   29.373383] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  567. [  108.726086] random: crng init done
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top