API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 1st, 2013
79
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 72.21 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.3.4 (Jan 31 2013 - 17:33:20) for MOI2900
  2.  
  3.  
  4. CPU: S5PV210@1000MHz(OK)
  5. APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
  6. MPLL = 667MHz, EPLL = 80MHz
  7. HclkDsys = 166MHz, PclkDsys = 83MHz
  8. HclkPsys = 133MHz, PclkPsys = 66MHz
  9. SCLKA2M = 200MHz
  10. Serial = CLKUART
  11. Board: MOI2900
  12. I2C: ready
  13. DRAM: 512 MB
  14. Flash: 8 MB
  15. SD/MMC: 7580MB
  16. NAND: 256 MB
  17.  
  18.  
  19. start normally!
  20. MAC address: ff:ff:ff:ff:ff:ff
  21. In: serial
  22. Out: serial
  23. Err: serial
  24. checking mode for fastboot ...
  25. Hit any key to stop autoboot: 0
  26. Partition1: Start Address(0x2000), Size(0xecc000)
  27. reading MOI2900_fs.bin
  28.  
  29. 39500736 bytes read
  30.  
  31. NAND erase: device 0 offset 0x50c0000, size 0x4000000
  32. Erasing at 0x90a0000 -- 100% complete.
  33. OK
  34.  
  35. NAND write: device 0 offset 0x50c0000, size 0x25abbc0
  36.  
  37. Writing data at 0x7547000 -- 100% complete.
  38. 39500736 bytes written: OK
  39. Partition1: Start Address(0x2000), Size(0xecc000)
  40. reading MOI2900_fs_bk.bin
  41.  
  42. ** Unable to read "MOI2900_fs_bk.bin" from mmc 0:1 **
  43. Partition1: Start Address(0x2000), Size(0xecc000)
  44. reading MOI2900_k_bk.bin
  45.  
  46. ** Unable to read "MOI2900_k_bk.bin" from mmc 0:1 **
  47. Partition1: Start Address(0x2000), Size(0xecc000)
  48. reading MOI2900_k.bin
  49.  
  50. 3038248 bytes read
  51.  
  52. NAND erase: device 0 offset 0x48c0000, size 0x400000
  53. Erasing at 0x4ca0000 -- 100% complete.
  54. OK
  55.  
  56. NAND write: device 0 offset 0x48c0000, size 0x400000
  57. Main area write (32 blocks):
  58. 4194304 bytes written: OK
  59.  
  60. NAND read: device 0 offset 0x48c0000, size 0x400000
  61. Main area read (32 blocks):
  62. 4194304 bytes read: OK
  63. Boot with zImage
  64.  
  65. Starting kernel ...
  66.  
  67. Uncompressing Linux... done, booting the kernel.
  68. [ 0.000000] Initializing cgroup subsys cpu
  69. [ 0.000000] Linux version 2.6.35.7 (root@kosio-System-Product-Name) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #37 PREEMPT Wed Jan 23 01:54:33 EET 2013
  70. [ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
  71. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  72. [ 0.000000] Machine: SMDKV210
  73. [ 0.000000] Ignoring unrecognised tag 0x41001099
  74. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  75. [ 0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
  76. [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
  77. [ 0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
  78. [ 0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
  79. [ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
  80. [ 0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
  81. [ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
  82. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  83. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  84. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  85. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  86. [ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
  87. [ 0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000
  88. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  89. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  90. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  91. [ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
  92. [ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
  93. [ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
  94. [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  95. [ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
  96. [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  97. [ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
  98. [ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
  99. [ 0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
  100. [ 0.000000] sclk: source is sclk_a2m (0), rate is 200000000
  101. [ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
  102. [ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
  103. [ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
  104. [ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
  105. [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
  106. [ 0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000
  107. [ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
  108. [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x30aae000
  109. [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
  110. [ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x42400000
  111. [ 0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x43c00000
  112. [ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x445ab000
  113. [ 0.000000] s5pv210: 8388608 bytes system memory reserved for jpeg at 0x45dab000
  114. [ 0.000000] s5pv210: 6144000 bytes system memory reserved for fimd at 0x465ab000
  115. [ 0.000000] s5pv210: 3072000 bytes system memory reserved for texstream at 0x46b87000
  116. [ 0.000000] s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x46e75000
  117. [ 0.000000] s5pv210: 8388608 bytes system memory reserved for g2d at 0x471ae000
  118. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  119. [ 0.000000] Kernel command line: console=ttySAC0,115200 mem=512M root=/dev/mtdblock3 ethaddr=/$(ethaddr) rootfstype=yaffs2 init=/linuxrc ethaddr=ff:ff:ff:ff:ff:ff
  120. [ 0.000000] crzteh ddddd User MAC address: 00:00:00:0e:00:dd
  121. [ 0.000000] crzteh ddddd User MAC address: ff:ff:ff:ff:ff:ff
  122. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  123. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  124. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  125. [ 0.000000] Memory: 512MB = 512MB total
  126. [ 0.000000] Memory: 351512k/351512k available, 172776k reserved, 0K highmem
  127. [ 0.000000] Virtual kernel memory layout:
  128. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  129. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  130. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  131. [ 0.000000] vmalloc : 0xe0800000 - 0xfc000000 ( 440 MB)
  132. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  133. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  134. [ 0.000000] .init : 0xc0008000 - 0xc002d000 ( 148 kB)
  135. [ 0.000000] .text : 0xc002d000 - 0xc05a8000 (5612 kB)
  136. [ 0.000000] .data : 0xc05a8000 - 0xc05ecca0 ( 276 kB)
  137. [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  138. [ 0.000000] Hierarchical RCU implementation.
  139. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  140. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  141. [ 0.000000] NR_IRQS:393
  142. [ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
  143. [ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
  144. [ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
  145. [ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
  146. [ 0.000000] console [ttySAC0] enabled
  147. [ 0.015000] Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
  148. [ 0.130000] pid_max: default: 32768 minimum: 301
  149. [ 0.130000] Mount-cache hash table entries: 512
  150. [ 0.130000] Initializing cgroup subsys debug
  151. [ 0.130000] Initializing cgroup subsys cpuacct
  152. [ 0.130000] Initializing cgroup subsys freezer
  153. [ 0.130000] CPU: Testing write buffer coherency: ok
  154. [ 0.135000] regulator: core version 0.5
  155. [ 0.140000] regulator: dummy:
  156. [ 0.140000] NET: Registered protocol family 16
  157. [ 0.150000] S3C Power Management, Copyright 2004 Simtec Electronics
  158. [ 0.150000] pmstats at 00000000
  159. [ 0.155000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  160. [ 0.160000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  161. [ 0.165000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  162. [ 0.170000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  163. [ 0.175000] S5PV210: Initializing architecture
  164. [ 0.180000] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
  165. [ 0.185000] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
  166. [ 0.190000] s3c24xx-pwm s3c24xx-pwm.2: tin at 22233333, tdiv at 22233333, tin=divclk, base 12
  167. [ 0.195000] s3c24xx-pwm s3c24xx-pwm.3: tin at 22233333, tdiv at 22233333, tin=divclk, base 16
  168. [ 0.200000] regulator: pd_audio_supply: 5000 mV normal
  169. [ 0.205000] regulator: pd_cam_supply: 5000 mV normal
  170. [ 0.210000] regulator: pd_tv_supply: 5000 mV normal
  171. [ 0.215000] regulator: pd_lcd_supply: 5000 mV normal
  172. [ 0.220000] regulator: pd_g3d_supply: 5000 mV normal
  173. [ 0.225000] regulator: pd_mfc_supply: 5000 mV normal
  174. [ 0.235000] bio: create slab <bio-0> at 0
  175. [ 0.235000] SCSI subsystem initialized
  176. [ 0.235000] usbcore: registered new interface driver usbfs
  177. [ 0.240000] usbcore: registered new interface driver hub
  178. [ 0.245000] usbcore: registered new device driver usb
  179. [ 0.250000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  180. [ 0.255000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  181. [ 0.260000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
  182. [ 0.265000] Advanced Linux Sound Architecture Driver Version 1.0.23.
  183. [ 0.270000] cfg80211: Calling CRDA to update world regulatory domain
  184. [ 0.275000] NET: Registered protocol family 2
  185. [ 0.280000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  186. [ 0.285000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  187. [ 0.290000] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
  188. [ 0.295000] TCP: Hash tables configured (established 16384 bind 16384)
  189. [ 0.300000] TCP reno registered
  190. [ 0.300000] UDP hash table entries: 256 (order: 1, 12288 bytes)
  191. [ 0.305000] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  192. [ 0.310000] NET: Registered protocol family 1
  193. [ 0.315000] PMU: registered new PMU device of type 0
  194. [ 0.320000] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
  195. [ 0.325000] S5PV210 ADC driver, (c) 2010 Samsung Electronics
  196. [ 0.330000] cpuidle: phy_regs_save:0x4fcbb000
  197. [ 0.335000] Loaded driver for PL330 DMAC-0 s3c-pl330
  198. [ 0.340000] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
  199. [ 0.345000] Loaded driver for PL330 DMAC-1 s3c-pl330
  200. [ 0.350000] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  201. [ 0.355000] Loaded driver for PL330 DMAC-2 s3c-pl330
  202. [ 0.360000] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  203. [ 0.370000] ashmem: initialized
  204. [ 0.370000] ROMFS MTD (C) 2007 Red Hat, Inc.
  205. [ 0.370000] msgmni has been set to 686
  206. [ 0.375000] alg: No test for stdrng (krng)
  207. [ 0.410000] io scheduler noop registered
  208. [ 0.410000] io scheduler deadline registered
  209. [ 0.410000] io scheduler cfq registered (default)
  210. [ 0.410000] s3cfb s3cfb: [fb2] dma: 0x465ab000, cpu: 0xe1000000, size: 0x005dc000
  211. [ 0.415000] FIMD src sclk = 166750000
  212. [ 0.535000] s3cfb s3cfb: registered successfully
  213. [ 0.535000] Start display and show logo
  214. [ 0.540000] TBS MOI: init timer_dev successful
  215. [ 0.540000] PA FB = 0x465AB000, bits per pixel = 32
  216. [ 0.540000] screen width=800 height=480 va=0xd65ab000 pa=0x465ab000
  217. [ 0.540000] xres_virtual = 800, yres_virtual = 1920, xoffset = 0, yoffset = 0
  218. [ 0.545000] fb_size=6144000
  219. [ 0.550000] Back frameBuffer[0].VAddr=d6722000 PAddr=46722000 size=1536000
  220. [ 0.555000] Back frameBuffer[1].VAddr=d6899000 PAddr=46899000 size=1536000
  221. [ 0.560000] Back frameBuffer[2].VAddr=d6a10000 PAddr=46a10000 size=1536000
  222. [ 0.565000] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
  223. [ 0.570000] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
  224. [ 0.575000] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
  225. [ 0.580000] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
  226. [ 0.590000] brd: module loaded
  227. [ 0.595000] loop: module loaded
  228. [ 0.595000] pmem_gpu1: 1 init
  229. [ 0.595000] Android kernel panic handler initialized (bind=kpanic)
  230. [ 0.600000] S3C NAND Driver, (c) 2008 Samsung Electronics
  231. [ 0.605000] S3C NAND Driver is using hardware ECC.
  232. [ 0.610000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
  233. [ 0.615000] Creating 4 MTD partitions on "s5pv210-nand":
  234. [ 0.620000] 0x0000000c0000-0x0000008c0000 : "kernel-safe"
  235. [ 0.630000] 0x0000008c0000-0x0000048c0000 : "rootfs-safe"
  236. [ 0.645000] 0x0000048c0000-0x0000050c0000 : "kernel"
  237. [ 0.645000] 0x0000050c0000-0x000010000000 : "rootfs"
  238. [ 0.680000] smsc911x: Driver version 2008-10-21.
  239. [ 0.680000] smsc911x: Driver version A2008-10-21.
  240. [ 0.680000] smsc911x: Driver version AA 2008-10-21.
  241. [ 0.680000] smsc911x: Driver version AAA 2008-10-21.
  242. [ 0.680000] LAN base phy in probe: 0xA8000000
  243. [ 0.680000] LAN base virt in probe: 0xE088E000
  244. [ 0.685000] smsc911x-mdio: probed
  245. [ 0.685000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
  246. [ 0.690000] net eth0: MAC Address: 4e:69:d6:19:82:21
  247. [ 0.695000] libertas_sdio: Libertas SDIO driver
  248. [ 0.700000] libertas_sdio: Copyright Pierre Ossman
  249. [ 0.705000] usbcore: registered new interface driver rt73usb
  250. [ 0.710000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  251. [ 0.715000] s5p-ehci s5p-ehci: s5pv210 EHCI
  252. [ 0.720000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  253. [ 0.725000] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
  254. [ 0.740000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  255. [ 0.740000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  256. [ 0.740000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  257. [ 0.745000] usb usb1: Product: s5pv210 EHCI
  258. [ 0.750000] usb usb1: Manufacturer: Linux 2.6.35.7 ehci_hcd
  259. [ 0.755000] usb usb1: SerialNumber: s5pv210
  260. [ 0.760000] hub 1-0:1.0: USB hub found
  261. [ 0.765000] hub 1-0:1.0: 1 port detected
  262. [ 0.770000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  263. [ 0.775000] s5p-ohci s5p-ohci: s5pv210 OHCI
  264. [ 0.780000] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
  265. [ 0.785000] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
  266. [ 0.845000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  267. [ 0.845000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  268. [ 0.845000] usb usb2: Product: s5pv210 OHCI
  269. [ 0.845000] usb usb2: Manufacturer: Linux 2.6.35.7 ohci_hcd
  270. [ 0.850000] usb usb2: SerialNumber: s5pv210
  271. [ 0.855000] hub 2-0:1.0: USB hub found
  272. [ 0.855000] hub 2-0:1.0: 1 port detected
  273. [ 0.860000] Initializing USB Mass Storage driver...
  274. [ 0.865000] usbcore: registered new interface driver usb-storage
  275. [ 0.870000] USB Mass Storage support registered.
  276. [ 0.875000] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
  277. [ 0.875000] s3c-udc : version 15 March 2009 (DMA Mode)
  278. [ 0.880000] android init
  279. [ 0.880000] android_probe pdata: c05b56e0
  280. [ 0.885000] android_bind
  281. [ 0.890000] android_usb gadget: android_usb ready
  282. [ 0.915000] f_acm init
  283. [ 0.915000] android_register_function acm
  284. [ 0.915000] f_adb init
  285. [ 0.915000] android_register_function adb
  286. [ 0.915000] f_mass_storage init
  287. [ 0.915000] fsg_probe pdev: c05b4660, pdata: c05b5704
  288. [ 0.915000] android_register_function usb_mass_storage
  289. [ 0.920000] f_mtp init
  290. [ 0.920000] android_register_function mtp
  291. [ 0.925000] f_rndis init
  292. [ 0.925000] android_register_function rndis
  293. [ 0.930000] rndis_function_bind_config MAC: 02:02:45:46:4F:48
  294. [ 0.935000] android_usb gadget: using random self ethernet address
  295. [ 0.940000] android_usb gadget: using random host ethernet address
  296. [ 0.945000] usb0: MAC 42:aa:f5:29:28:36
  297. [ 0.950000] usb0: HOST MAC ea:e8:32:ac:0a:e9
  298. [ 0.955000] android_usb gadget: Mass Storage Function, version: 2009/09/11
  299. [ 0.960000] android_usb gadget: Number of LUNs=1
  300. [ 0.965000] lun0: LUN: removable file: (no medium)
  301. [ 0.970000] adb_bind_config
  302. [ 0.970000] mtp_bind_config
  303. [ 0.975000] mice: PS/2 mouse device common for all mice
  304. [ 0.980000] input: s3c-keypad as /devices/virtual/input/input0
  305. [ 0.985000] s3c-keypad Initialized
  306. [ 0.995000] S3C Keypad Driver
  307. [ 0.995000] using rtc device, ds1338, for alarms
  308. [ 0.995000] rtc-ds1307 0-0068: rtc core: registered ds1338 as rtc0
  309. [ 1.000000] rtc-ds1307 0-0068: 56 bytes nvram
  310. [ 1.005000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  311. [ 1.010000] i2c /dev entries driver
  312. [ 1.015000] Linux video capture interface: v2.00
  313. [ 1.020000] gspca: main v2.9.0 registered
  314. [ 1.025000] s3c-csis: Samsung MIPI-CSI2 driver probed successfully
  315. [ 1.030000] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
  316. [ 1.030000]
  317. [ 1.035000] S3C JPEG Driver, (c) 2007 Samsung Electronics
  318. [ 1.040000] JPEG driver for S5PV210
  319. [ 1.045000] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
  320. [ 1.050000] S5PC11X HPD Driver, (c) 2009 Samsung Electronics
  321. [ 1.055000] S5PC11X CEC Driver, (c) 2009 Samsung Electronics
  322. [ 1.060000] usbcore: registered new interface driver tbs2900
  323. [ 1.065000] s3c_bat_init
  324. [ 1.070000] sec-fake-battery sec-fake-battery: s3c_bat_probe
  325. [ 1.075000] device-mapper: uevent: version 1.0.3
  326. [ 1.080000] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  327. [ 1.085000] cpuidle: using governor ladder
  328. [ 1.090000] sdhci: Secure Digital Host Controller Interface driver
  329. [ 1.095000] sdhci: Copyright(c) Pierre Ossman
  330. [ 1.100000] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
  331. [ 1.105000] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
  332. [ 1.110000] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
  333. [ 1.115000] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
  334. [ 1.120000] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
  335. [ 1.125000] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
  336. [ 1.130000] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
  337. [ 1.135000] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
  338. [ 1.140000] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
  339. [ 1.145000] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
  340. [ 1.150000] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
  341. [ 1.155000] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  342. [ 1.160000] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
  343. [ 1.165000] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
  344. [ 1.170000] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
  345. [ 1.175000] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
  346. [ 1.180000] usb 1-1: new high speed USB device using s5p-ehci and address 2
  347. [ 1.185000] usbcore: registered new interface driver usbhid
  348. [ 1.190000] usbhid: USB HID core driver
  349. [ 1.200000] logger: created 64K log 'log_main'
  350. [ 1.200000] logger: created 256K log 'log_events'
  351. [ 1.205000] logger: created 64K log 'log_radio'
  352. [ 1.210000] logger: created 64K log 'log_system'
  353. [ 1.215000] ALSA device list:
  354. [ 1.215000] No soundcards found.
  355. [ 1.220000] GACT probability NOT on
  356. [ 1.225000] Mirror/redirect action on
  357. [ 1.225000] u32 classifier
  358. [ 1.230000] Actions configured
  359. [ 1.235000] Netfilter messages via NETLINK v0.30.
  360. [ 1.240000] nf_conntrack version 0.5.0 (5492 buckets, 21968 max)
  361. [ 1.245000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  362. [ 1.250000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  363. [ 1.255000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  364. [ 1.260000] ctnetlink v0.93: registering with nfnetlink.
  365. [ 1.265000] xt_time: kernel timezone is -0000
  366. [ 1.270000] ip_tables: (C) 2000-2006 Netfilter Core Team
  367. [ 1.275000] arp_tables: (C) 2002 David S. Miller
  368. [ 1.280000] TCP cubic registered
  369. [ 1.285000] NET: Registered protocol family 10
  370. [ 1.290000] lo: Disabled Privacy Extensions
  371. [ 1.295000] Mobile IPv6
  372. [ 1.295000] IPv6 over IPv4 tunneling driver
  373. [ 1.300000] sit0: Disabled Privacy Extensions
  374. [ 1.305000] ip6tnl0: Disabled Privacy Extensions
  375. [ 1.310000] NET: Registered protocol family 17
  376. [ 1.310000] NET: Registered protocol family 15
  377. [ 1.315000] lib80211: common routines for IEEE802.11 drivers
  378. [ 1.320000] ThumbEE CPU extension supported.
  379. [ 1.325000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
  380. [ 1.335000] regulator_init_complete: disabling pd_mfc_supply
  381. [ 1.340000] regulator_init_complete: disabling pd_tv_supply
  382. [ 1.345000] regulator_init_complete: disabling pd_cam_supply
  383. [ 1.350000] regulator_init_complete: disabling pd_audio_supply
  384. [ 1.355000] rtc-ds1307 0-0068: setting system clock to 2013-03-01 09:28:33 UTC (1362130113)
  385. [ 1.360000] FIMC0 registered successfully
  386. [ 1.365000] FIMC1 registered successfully
  387. [ 1.370000] FIMC2 registered successfully
  388. [ 1.370000] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
  389. [ 1.380000] s5p-tvout s5p-tvout: hpd status is cable removed
  390. [ 1.390000] DBUG_PORT must not use AFC!
  391. [ 1.390000] yaffs: dev is 32505859 name is "mtdblock3" rw
  392. [ 1.390000] yaffs: passed flags ""
  393. [ 1.615000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  394. [ 1.615000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  395. [ 1.615000] usb 1-1: Product: USB2.0 Hub
  396. [ 1.615000] hub 1-1:1.0: USB hub found
  397. [ 1.620000] hub 1-1:1.0: 4 ports detected
  398. [ 1.690000] mmc0: new high speed SDHC card at address e624
  399. [ 1.690000] mmcblk0: mmc0:e624 SU08G 7.40 GiB
  400. [ 1.690000] mmcblk0: p1
  401. [ 1.980000] usb 1-1.1: new high speed USB device using s5p-ehci and address 3
  402. [ 2.130000] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610
  403. [ 2.130000] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  404. [ 2.130000] usb 1-1.1: Product: USB2.0 Hub
  405. [ 2.135000] hub 1-1.1:1.0: USB hub found
  406. [ 2.135000] hub 1-1.1:1.0: 4 ports detected
  407. [ 2.145000] List of all partitions:
  408. [ 2.145000] 1f00 8192 mtdblock0 (driver?)
  409. [ 2.145000] 1f01 65536 mtdblock1 (driver?)
  410. [ 2.145000] 1f02 8192 mtdblock2 (driver?)
  411. [ 2.150000] 1f03 179456 mtdblock3 (driver?)
  412. [ 2.155000] b300 7761920 mmcblk0 driver: mmcblk
  413. [ 2.160000] b301 7757824 mmcblk0p1
  414. [ 2.165000] No filesystem could mount root, tried: yaffs2
  415. [ 2.170000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)
  416. [ 2.175000] Backtrace:
  417. [ 2.175000] [<c0032064>] (dump_backtrace+0x0/0x110) from [<c0423e54>] (dump_stack+0x18/0x1c)
  418. [ 2.180000] r6:00008000 r5:dfeb9007 r4:c05b90c4 r3:00000002
  419. [ 2.185000] [<c0423e3c>] (dump_stack+0x0/0x1c) from [<c0423ed0>] (panic+0x78/0xf8)
  420. [ 2.190000] [<c0423e58>] (panic+0x0/0xf8) from [<c0009048>] (mount_block_root+0x25c/0x2ac)
  421. [ 2.195000] r3:00000000 r2:00000020 r1:dfc2ff60 r0:c0541975
  422. [ 2.200000] [<c0008dec>] (mount_block_root+0x0/0x2ac) from [<c00090ec>] (mount_root+0x54/0x68)
  423. [ 2.205000] [<c0009098>] (mount_root+0x0/0x68) from [<c0009270>] (prepare_namespace+0x170/0x1c8)
  424. [ 2.210000] r5:c0028a39 r4:c05ecfc0
  425. [ 2.215000] [<c0009100>] (prepare_namespace+0x0/0x1c8) from [<c00084fc>] (kernel_init+0x128/0x170)
  426. [ 2.220000] r5:c00083d4 r4:c05ecd80
  427. [ 2.225000] [<c00083d4>] (kernel_init+0x0/0x170) from [<c00543ac>] (do_exit+0x0/0x5e0)
  428. [ 2.230000] r4:00000000 r3:00000000
  429. [ 2.230000] Rebooting in 5 seconds..TBS MOI: turn on tuner device 1
  430. [ 7.240000]
  431. [ 7.240000] Restarting OK
  432.  
  433. U-Boot 1.3.4 (Jan 31 2013 - 17:33:20) for MOI2900
  434.  
  435.  
  436. CPU: S5PV210@1000MHz(OK)
  437. APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
  438. MPLL = 667MHz, EPLL = 80MHz
  439. HclkDsys = 166MHz, PclkDsys = 83MHz
  440. HclkPsys = 133MHz, PclkPsys = 66MHz
  441. SCLKA2M = 200MHz
  442. Serial = CLKUART
  443. Board: MOI2900
  444. I2C: ready
  445. DRAM: 512 MB
  446. Flash: 8 MB
  447. SD/MMC: 7580MB
  448. NAND: 256 MB
  449.  
  450.  
  451. start normally!
  452. MAC address: ff:ff:ff:ff:ff:ff
  453. In: serial
  454. Out: serial
  455. Err: serial
  456. checking mode for fastboot ...
  457. Hit any key to stop autoboot: 0
  458. Partition1: Start Address(0x2000), Size(0xecc000)
  459. reading MOI2900_fs.bin
  460.  
  461. 39500736 bytes read
  462.  
  463. NAND erase: device 0 offset 0x50c0000, size 0x4000000
  464. Erasing at 0x90a0000 -- 100% complete.
  465. OK
  466.  
  467. NAND write: device 0 offset 0x50c0000, size 0x25abbc0
  468.  
  469. Writing data at 0x7547000 -- 100% complete.
  470. 39500736 bytes written: OK
  471. Partition1: Start Address(0x2000), Size(0xecc000)
  472. reading MOI2900_fs_bk.bin
  473.  
  474. ** Unable to read "MOI2900_fs_bk.bin" from mmc 0:1 **
  475. Partition1: Start Address(0x2000), Size(0xecc000)
  476. reading MOI2900_k_bk.bin
  477.  
  478. ** Unable to read "MOI2900_k_bk.bin" from mmc 0:1 **
  479. Partition1: Start Address(0x2000), Size(0xecc000)
  480. reading MOI2900_k.bin
  481.  
  482. 3038248 bytes read
  483.  
  484. NAND erase: device 0 offset 0x48c0000, size 0x400000
  485. Erasing at 0x4ca0000 -- 100% complete.
  486. OK
  487.  
  488. NAND write: device 0 offset 0x48c0000, size 0x400000
  489. Main area write (32 blocks):
  490. 4194304 bytes written: OK
  491.  
  492. NAND read: device 0 offset 0x48c0000, size 0x400000
  493. Main area read (32 blocks):
  494. 4194304 bytes read: OK
  495. Boot with zImage
  496.  
  497. Starting kernel ...
  498.  
  499. Uncompressing Linux... done, booting the kernel.
  500. [ 0.000000] Initializing cgroup subsys cpu
  501. [ 0.000000] Linux version 2.6.35.7 (root@kosio-System-Product-Name) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #37 PREEMPT Wed Jan 23 01:54:33 EET 2013
  502. [ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
  503. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  504. [ 0.000000] Machine: SMDKV210
  505. [ 0.000000] Ignoring unrecognised tag 0x41001099
  506. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  507. [ 0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
  508. [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
  509. [ 0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
  510. [ 0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
  511. [ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
  512. [ 0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
  513. [ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
  514. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  515. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  516. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  517. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  518. [ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
  519. [ 0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000
  520. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  521. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  522. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  523. [ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
  524. [ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
  525. [ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
  526. [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  527. [ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
  528. [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  529. [ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
  530. [ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
  531. [ 0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
  532. [ 0.000000] sclk: source is sclk_a2m (0), rate is 200000000
  533. [ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
  534. [ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
  535. [ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
  536. [ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
  537. [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
  538. [ 0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000
  539. [ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
  540. [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x30aae000
  541. [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
  542. [ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x42400000
  543. [ 0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x43c00000
  544. [ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x445ab000
  545. [ 0.000000] s5pv210: 8388608 bytes system memory reserved for jpeg at 0x45dab000
  546. [ 0.000000] s5pv210: 6144000 bytes system memory reserved for fimd at 0x465ab000
  547. [ 0.000000] s5pv210: 3072000 bytes system memory reserved for texstream at 0x46b87000
  548. [ 0.000000] s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x46e75000
  549. [ 0.000000] s5pv210: 8388608 bytes system memory reserved for g2d at 0x471ae000
  550. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  551. [ 0.000000] Kernel command line: console=ttySAC0,115200 mem=512M root=/dev/mtdblock3 ethaddr=/$(ethaddr) rootfstype=yaffs2 init=/linuxrc ethaddr=ff:ff:ff:ff:ff:ff
  552. [ 0.000000] crzteh ddddd User MAC address: 00:00:00:0e:00:dd
  553. [ 0.000000] crzteh ddddd User MAC address: ff:ff:ff:ff:ff:ff
  554. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  555. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  556. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  557. [ 0.000000] Memory: 512MB = 512MB total
  558. [ 0.000000] Memory: 351512k/351512k available, 172776k reserved, 0K highmem
  559. [ 0.000000] Virtual kernel memory layout:
  560. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  561. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  562. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  563. [ 0.000000] vmalloc : 0xe0800000 - 0xfc000000 ( 440 MB)
  564. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  565. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  566. [ 0.000000] .init : 0xc0008000 - 0xc002d000 ( 148 kB)
  567. [ 0.000000] .text : 0xc002d000 - 0xc05a8000 (5612 kB)
  568. [ 0.000000] .data : 0xc05a8000 - 0xc05ecca0 ( 276 kB)
  569. [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  570. [ 0.000000] Hierarchical RCU implementation.
  571. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  572. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  573. [ 0.000000] NR_IRQS:393
  574. [ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
  575. [ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
  576. [ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
  577. [ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
  578. [ 0.000000] console [ttySAC0] enabled
  579. [ 0.015000] Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
  580. [ 0.130000] pid_max: default: 32768 minimum: 301
  581. [ 0.130000] Mount-cache hash table entries: 512
  582. [ 0.130000] Initializing cgroup subsys debug
  583. [ 0.130000] Initializing cgroup subsys cpuacct
  584. [ 0.130000] Initializing cgroup subsys freezer
  585. [ 0.130000] CPU: Testing write buffer coherency: ok
  586. [ 0.135000] regulator: core version 0.5
  587. [ 0.140000] regulator: dummy:
  588. [ 0.140000] NET: Registered protocol family 16
  589. [ 0.150000] S3C Power Management, Copyright 2004 Simtec Electronics
  590. [ 0.150000] pmstats at 00000000
  591. [ 0.155000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  592. [ 0.160000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  593. [ 0.165000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  594. [ 0.170000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  595. [ 0.175000] S5PV210: Initializing architecture
  596. [ 0.180000] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
  597. [ 0.185000] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
  598. [ 0.190000] s3c24xx-pwm s3c24xx-pwm.2: tin at 22233333, tdiv at 22233333, tin=divclk, base 12
  599. [ 0.195000] s3c24xx-pwm s3c24xx-pwm.3: tin at 22233333, tdiv at 22233333, tin=divclk, base 16
  600. [ 0.200000] regulator: pd_audio_supply: 5000 mV normal
  601. [ 0.205000] regulator: pd_cam_supply: 5000 mV normal
  602. [ 0.210000] regulator: pd_tv_supply: 5000 mV normal
  603. [ 0.215000] regulator: pd_lcd_supply: 5000 mV normal
  604. [ 0.220000] regulator: pd_g3d_supply: 5000 mV normal
  605. [ 0.225000] regulator: pd_mfc_supply: 5000 mV normal
  606. [ 0.235000] bio: create slab <bio-0> at 0
  607. [ 0.235000] SCSI subsystem initialized
  608. [ 0.235000] usbcore: registered new interface driver usbfs
  609. [ 0.240000] usbcore: registered new interface driver hub
  610. [ 0.245000] usbcore: registered new device driver usb
  611. [ 0.250000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  612. [ 0.255000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  613. [ 0.260000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
  614. [ 0.265000] Advanced Linux Sound Architecture Driver Version 1.0.23.
  615. [ 0.270000] cfg80211: Calling CRDA to update world regulatory domain
  616. [ 0.275000] NET: Registered protocol family 2
  617. [ 0.280000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  618. [ 0.285000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  619. [ 0.290000] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
  620. [ 0.295000] TCP: Hash tables configured (established 16384 bind 16384)
  621. [ 0.300000] TCP reno registered
  622. [ 0.300000] UDP hash table entries: 256 (order: 1, 12288 bytes)
  623. [ 0.305000] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  624. [ 0.310000] NET: Registered protocol family 1
  625. [ 0.315000] PMU: registered new PMU device of type 0
  626. [ 0.320000] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
  627. [ 0.325000] S5PV210 ADC driver, (c) 2010 Samsung Electronics
  628. [ 0.330000] cpuidle: phy_regs_save:0x4fcbb000
  629. [ 0.335000] Loaded driver for PL330 DMAC-0 s3c-pl330
  630. [ 0.340000] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
  631. [ 0.345000] Loaded driver for PL330 DMAC-1 s3c-pl330
  632. [ 0.350000] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  633. [ 0.355000] Loaded driver for PL330 DMAC-2 s3c-pl330
  634. [ 0.360000] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  635. [ 0.370000] ashmem: initialized
  636. [ 0.370000] ROMFS MTD (C) 2007 Red Hat, Inc.
  637. [ 0.370000] msgmni has been set to 686
  638. [ 0.375000] alg: No test for stdrng (krng)
  639. [ 0.410000] io scheduler noop registered
  640. [ 0.410000] io scheduler deadline registered
  641. [ 0.410000] io scheduler cfq registered (default)
  642. [ 0.410000] s3cfb s3cfb: [fb2] dma: 0x465ab000, cpu: 0xe1000000, size: 0x005dc000
  643. [ 0.415000] FIMD src sclk = 166750000
  644. [ 0.535000] s3cfb s3cfb: registered successfully
  645. [ 0.535000] Start display and show logo
  646. [ 0.540000] TBS MOI: init timer_dev successful
  647. [ 0.540000] PA FB = 0x465AB000, bits per pixel = 32
  648. [ 0.540000] screen width=800 height=480 va=0xd65ab000 pa=0x465ab000
  649. [ 0.540000] xres_virtual = 800, yres_virtual = 1920, xoffset = 0, yoffset = 0
  650. [ 0.545000] fb_size=6144000
  651. [ 0.550000] Back frameBuffer[0].VAddr=d6722000 PAddr=46722000 size=1536000
  652. [ 0.555000] Back frameBuffer[1].VAddr=d6899000 PAddr=46899000 size=1536000
  653. [ 0.560000] Back frameBuffer[2].VAddr=d6a10000 PAddr=46a10000 size=1536000
  654. [ 0.565000] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
  655. [ 0.570000] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
  656. [ 0.575000] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
  657. [ 0.580000] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
  658. [ 0.590000] brd: module loaded
  659. [ 0.595000] loop: module loaded
  660. [ 0.595000] pmem_gpu1: 1 init
  661. [ 0.595000] Android kernel panic handler initialized (bind=kpanic)
  662. [ 0.600000] S3C NAND Driver, (c) 2008 Samsung Electronics
  663. [ 0.605000] S3C NAND Driver is using hardware ECC.
  664. [ 0.610000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
  665. [ 0.615000] Creating 4 MTD partitions on "s5pv210-nand":
  666. [ 0.620000] 0x0000000c0000-0x0000008c0000 : "kernel-safe"
  667. [ 0.630000] 0x0000008c0000-0x0000048c0000 : "rootfs-safe"
  668. [ 0.645000] 0x0000048c0000-0x0000050c0000 : "kernel"
  669. [ 0.645000] 0x0000050c0000-0x000010000000 : "rootfs"
  670. [ 0.680000] smsc911x: Driver version 2008-10-21.
  671. [ 0.680000] smsc911x: Driver version A2008-10-21.
  672. [ 0.680000] smsc911x: Driver version AA 2008-10-21.
  673. [ 0.680000] smsc911x: Driver version AAA 2008-10-21.
  674. [ 0.680000] LAN base phy in probe: 0xA8000000
  675. [ 0.680000] LAN base virt in probe: 0xE088E000
  676. [ 0.685000] smsc911x-mdio: probed
  677. [ 0.685000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
  678. [ 0.690000] net eth0: MAC Address: 32:d5:29:10:d4:2e
  679. [ 0.695000] libertas_sdio: Libertas SDIO driver
  680. [ 0.700000] libertas_sdio: Copyright Pierre Ossman
  681. [ 0.705000] usbcore: registered new interface driver rt73usb
  682. [ 0.710000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  683. [ 0.715000] s5p-ehci s5p-ehci: s5pv210 EHCI
  684. [ 0.720000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  685. [ 0.725000] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
  686. [ 0.740000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  687. [ 0.740000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  688. [ 0.740000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  689. [ 0.745000] usb usb1: Product: s5pv210 EHCI
  690. [ 0.750000] usb usb1: Manufacturer: Linux 2.6.35.7 ehci_hcd
  691. [ 0.755000] usb usb1: SerialNumber: s5pv210
  692. [ 0.760000] hub 1-0:1.0: USB hub found
  693. [ 0.765000] hub 1-0:1.0: 1 port detected
  694. [ 0.770000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  695. [ 0.775000] s5p-ohci s5p-ohci: s5pv210 OHCI
  696. [ 0.780000] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
  697. [ 0.785000] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
  698. [ 0.845000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  699. [ 0.845000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  700. [ 0.845000] usb usb2: Product: s5pv210 OHCI
  701. [ 0.845000] usb usb2: Manufacturer: Linux 2.6.35.7 ohci_hcd
  702. [ 0.850000] usb usb2: SerialNumber: s5pv210
  703. [ 0.855000] hub 2-0:1.0: USB hub found
  704. [ 0.855000] hub 2-0:1.0: 1 port detected
  705. [ 0.860000] Initializing USB Mass Storage driver...
  706. [ 0.865000] usbcore: registered new interface driver usb-storage
  707. [ 0.870000] USB Mass Storage support registered.
  708. [ 0.875000] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
  709. [ 0.875000] s3c-udc : version 15 March 2009 (DMA Mode)
  710. [ 0.880000] android init
  711. [ 0.880000] android_probe pdata: c05b56e0
  712. [ 0.885000] android_bind
  713. [ 0.890000] android_usb gadget: android_usb ready
  714. [ 0.915000] f_acm init
  715. [ 0.915000] android_register_function acm
  716. [ 0.915000] f_adb init
  717. [ 0.915000] android_register_function adb
  718. [ 0.915000] f_mass_storage init
  719. [ 0.915000] fsg_probe pdev: c05b4660, pdata: c05b5704
  720. [ 0.915000] android_register_function usb_mass_storage
  721. [ 0.920000] f_mtp init
  722. [ 0.920000] android_register_function mtp
  723. [ 0.925000] f_rndis init
  724. [ 0.925000] android_register_function rndis
  725. [ 0.930000] rndis_function_bind_config MAC: 02:02:45:46:4F:48
  726. [ 0.935000] android_usb gadget: using random self ethernet address
  727. [ 0.940000] android_usb gadget: using random host ethernet address
  728. [ 0.945000] usb0: MAC 2e:45:15:3d:70:c4
  729. [ 0.950000] usb0: HOST MAC 3a:68:1a:04:00:f3
  730. [ 0.955000] android_usb gadget: Mass Storage Function, version: 2009/09/11
  731. [ 0.960000] android_usb gadget: Number of LUNs=1
  732. [ 0.965000] lun0: LUN: removable file: (no medium)
  733. [ 0.970000] adb_bind_config
  734. [ 0.970000] mtp_bind_config
  735. [ 0.975000] mice: PS/2 mouse device common for all mice
  736. [ 0.980000] input: s3c-keypad as /devices/virtual/input/input0
  737. [ 0.985000] s3c-keypad Initialized
  738. [ 0.995000] S3C Keypad Driver
  739. [ 0.995000] using rtc device, ds1338, for alarms
  740. [ 0.995000] rtc-ds1307 0-0068: rtc core: registered ds1338 as rtc0
  741. [ 1.000000] rtc-ds1307 0-0068: 56 bytes nvram
  742. [ 1.005000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  743. [ 1.010000] i2c /dev entries driver
  744. [ 1.015000] Linux video capture interface: v2.00
  745. [ 1.020000] gspca: main v2.9.0 registered
  746. [ 1.025000] s3c-csis: Samsung MIPI-CSI2 driver probed successfully
  747. [ 1.030000] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
  748. [ 1.030000]
  749. [ 1.035000] S3C JPEG Driver, (c) 2007 Samsung Electronics
  750. [ 1.040000] JPEG driver for S5PV210
  751. [ 1.045000] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
  752. [ 1.050000] S5PC11X HPD Driver, (c) 2009 Samsung Electronics
  753. [ 1.055000] S5PC11X CEC Driver, (c) 2009 Samsung Electronics
  754. [ 1.060000] usbcore: registered new interface driver tbs2900
  755. [ 1.065000] s3c_bat_init
  756. [ 1.070000] sec-fake-battery sec-fake-battery: s3c_bat_probe
  757. [ 1.075000] device-mapper: uevent: version 1.0.3
  758. [ 1.080000] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  759. [ 1.085000] cpuidle: using governor ladder
  760. [ 1.090000] sdhci: Secure Digital Host Controller Interface driver
  761. [ 1.095000] sdhci: Copyright(c) Pierre Ossman
  762. [ 1.100000] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
  763. [ 1.105000] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
  764. [ 1.110000] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
  765. [ 1.115000] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
  766. [ 1.120000] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
  767. [ 1.125000] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
  768. [ 1.130000] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
  769. [ 1.135000] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
  770. [ 1.140000] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
  771. [ 1.145000] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
  772. [ 1.150000] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
  773. [ 1.155000] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  774. [ 1.160000] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
  775. [ 1.165000] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
  776. [ 1.170000] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
  777. [ 1.175000] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
  778. [ 1.180000] usb 1-1: new high speed USB device using s5p-ehci and address 2
  779. [ 1.185000] usbcore: registered new interface driver usbhid
  780. [ 1.190000] usbhid: USB HID core driver
  781. [ 1.200000] logger: created 64K log 'log_main'
  782. [ 1.200000] logger: created 256K log 'log_events'
  783. [ 1.205000] logger: created 64K log 'log_radio'
  784. [ 1.210000] logger: created 64K log 'log_system'
  785. [ 1.215000] ALSA device list:
  786. [ 1.215000] No soundcards found.
  787. [ 1.220000] GACT probability NOT on
  788. [ 1.225000] Mirror/redirect action on
  789. [ 1.225000] u32 classifier
  790. [ 1.230000] Actions configured
  791. [ 1.235000] Netfilter messages via NETLINK v0.30.
  792. [ 1.240000] nf_conntrack version 0.5.0 (5492 buckets, 21968 max)
  793. [ 1.245000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  794. [ 1.250000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  795. [ 1.255000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  796. [ 1.260000] ctnetlink v0.93: registering with nfnetlink.
  797. [ 1.265000] xt_time: kernel timezone is -0000
  798. [ 1.270000] ip_tables: (C) 2000-2006 Netfilter Core Team
  799. [ 1.275000] arp_tables: (C) 2002 David S. Miller
  800. [ 1.280000] TCP cubic registered
  801. [ 1.285000] NET: Registered protocol family 10
  802. [ 1.290000] lo: Disabled Privacy Extensions
  803. [ 1.295000] Mobile IPv6
  804. [ 1.295000] IPv6 over IPv4 tunneling driver
  805. [ 1.300000] sit0: Disabled Privacy Extensions
  806. [ 1.305000] ip6tnl0: Disabled Privacy Extensions
  807. [ 1.310000] NET: Registered protocol family 17
  808. [ 1.310000] NET: Registered protocol family 15
  809. [ 1.315000] lib80211: common routines for IEEE802.11 drivers
  810. [ 1.320000] ThumbEE CPU extension supported.
  811. [ 1.325000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
  812. [ 1.335000] regulator_init_complete: disabling pd_mfc_supply
  813. [ 1.340000] regulator_init_complete: disabling pd_tv_supply
  814. [ 1.345000] regulator_init_complete: disabling pd_cam_supply
  815. [ 1.350000] regulator_init_complete: disabling pd_audio_supply
  816. [ 1.355000] rtc-ds1307 0-0068: setting system clock to 2013-03-01 09:29:26 UTC (1362130166)
  817. [ 1.360000] FIMC0 registered successfully
  818. [ 1.365000] FIMC1 registered successfully
  819. [ 1.370000] FIMC2 registered successfully
  820. [ 1.370000] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
  821. [ 1.380000] s5p-tvout s5p-tvout: hpd status is cable removed
  822. [ 1.390000] DBUG_PORT must not use AFC!
  823. [ 1.390000] yaffs: dev is 32505859 name is "mtdblock3" rw
  824. [ 1.390000] yaffs: passed flags ""
  825. [ 1.615000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  826. [ 1.615000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  827. [ 1.615000] usb 1-1: Product: USB2.0 Hub
  828. [ 1.615000] hub 1-1:1.0: USB hub found
  829. [ 1.620000] hub 1-1:1.0: 4 ports detected
  830. [ 1.690000] mmc0: new high speed SDHC card at address e624
  831. [ 1.690000] mmcblk0: mmc0:e624 SU08G 7.40 GiB
  832. [ 1.690000] mmcblk0: p1
  833. [ 1.980000] usb 1-1.1: new high speed USB device using s5p-ehci and address 3
  834. [ 2.115000] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610
  835. [ 2.115000] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  836. [ 2.115000] usb 1-1.1: Product: USB2.0 Hub
  837. [ 2.130000] hub 1-1.1:1.0: USB hub found
  838. [ 2.135000] hub 1-1.1:1.0: 4 ports detected
  839. [ 2.150000] List of all partitions:
  840. [ 2.150000] 1f00 8192 mtdblock0 (driver?)
  841. [ 2.150000] 1f01 65536 mtdblock1 (driver?)
  842. [ 2.150000] 1f02 8192 mtdblock2 (driver?)
  843. [ 2.150000] 1f03 179456 mtdblock3 (driver?)
  844. [ 2.150000] b300 7761920 mmcblk0 driver: mmcblk
  845. [ 2.155000] b301 7757824 mmcblk0p1
  846. [ 2.160000] No filesystem could mount root, tried: yaffs2
  847. [ 2.165000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)
  848. [ 2.170000] Backtrace:
  849. [ 2.175000] [<c0032064>] (dump_backtrace+0x0/0x110) from [<c0423e54>] (dump_stack+0x18/0x1c)
  850. [ 2.180000] r6:00008000 r5:dfeb9007 r4:c05b90c4 r3:00000002
  851. [ 2.185000] [<c0423e3c>] (dump_stack+0x0/0x1c) from [<c0423ed0>] (panic+0x78/0xf8)
  852. [ 2.190000] [<c0423e58>] (panic+0x0/0xf8) from [<c0009048>] (mount_block_root+0x25c/0x2ac)
  853. [ 2.195000] r3:00000000 r2:00000020 r1:dfc2ff60 r0:c0541975
  854. [ 2.200000] [<c0008dec>] (mount_block_root+0x0/0x2ac) from [<c00090ec>] (mount_root+0x54/0x68)
  855. [ 2.205000] [<c0009098>] (mount_root+0x0/0x68) from [<c0009270>] (prepare_namespace+0x170/0x1c8)
  856. [ 2.215000] r5:c0028a39 r4:c05ecfc0
  857. [ 2.215000] [<c0009100>] (prepare_namespace+0x0/0x1c8) from [<c00084fc>] (kernel_init+0x128/0x170)
  858. [ 2.220000] r5:c00083d4 r4:c05ecd80
  859. [ 2.225000] [<c00083d4>] (kernel_init+0x0/0x170) from [<c00543ac>] (do_exit+0x0/0x5e0)
  860. [ 2.230000] r4:00000000 r3:00000000
  861. [ 2.235000] Rebooting in 5 seconds..TBS MOI: turn on tuner device 1
  862. [ 7.240000]
  863. [ 7.240000] Restarting OK
  864.  
  865. U-Boot 1.3.4 (Jan 31 2013 - 17:33:20) for MOI2900
  866.  
  867.  
  868. CPU: S5PV210@1000MHz(OK)
  869. APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
  870. MPLL = 667MHz, EPLL = 80MHz
  871. HclkDsys = 166MHz, PclkDsys = 83MHz
  872. HclkPsys = 133MHz, PclkPsys = 66MHz
  873. SCLKA2M = 200MHz
  874. Serial = CLKUART
  875. Board: MOI2900
  876. I2C: ready
  877. DRAM: 512 MB
  878. Flash: 8 MB
  879. SD/MMC: 7580MB
  880. NAND: 256 MB
  881.  
  882.  
  883. start normally!
  884. MAC address: ff:ff:ff:ff:ff:ff
  885. In: serial
  886. Out: serial
  887. Err: serial
  888. checking mode for fastboot ...
  889. Hit any key to stop autoboot: 0
  890. Partition1: Start Address(0x2000), Size(0xecc000)
  891. reading MOI2900_fs.bin
  892.  
  893. 39500736 bytes read
  894.  
  895. NAND erase: device 0 offset 0x50c0000, size 0x4000000
  896. Erasing at 0x90a0000 -- 100% complete.
  897. OK
  898.  
  899. NAND write: device 0 offset 0x50c0000, size 0x25abbc0
  900.  
  901. Writing data at 0x7547000 -- 100% complete.
  902. 39500736 bytes written: OK
  903. Partition1: Start Address(0x2000), Size(0xecc000)
  904. reading MOI2900_fs_bk.bin
  905.  
  906. ** Unable to read "MOI2900_fs_bk.bin" from mmc 0:1 **
  907. Partition1: Start Address(0x2000), Size(0xecc000)
  908. reading MOI2900_k_bk.bin
  909.  
  910. ** Unable to read "MOI2900_k_bk.bin" from mmc 0:1 **
  911. Partition1: Start Address(0x2000), Size(0xecc000)
  912. reading MOI2900_k.bin
  913.  
  914. 3038248 bytes read
  915.  
  916. NAND erase: device 0 offset 0x48c0000, size 0x400000
  917. Erasing at 0x4ca0000 -- 100% complete.
  918. OK
  919.  
  920. NAND write: device 0 offset 0x48c0000, size 0x400000
  921. Main area write (32 blocks):
  922. 4194304 bytes written: OK
  923.  
  924. NAND read: device 0 offset 0x48c0000, size 0x400000
  925. Main area read (32 blocks):
  926. 4194304 bytes read: OK
  927. Boot with zImage
  928.  
  929. Starting kernel ...
  930.  
  931. Uncompressing Linux... done, booting the kernel.
  932. [ 0.000000] Initializing cgroup subsys cpu
  933. [ 0.000000] Linux version 2.6.35.7 (root@kosio-System-Product-Name) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #37 PREEMPT Wed Jan 23 01:54:33 EET 2013
  934. [ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
  935. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  936. [ 0.000000] Machine: SMDKV210
  937. [ 0.000000] Ignoring unrecognised tag 0x41001099
  938. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  939. [ 0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
  940. [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
  941. [ 0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=80000000 V=54000000
  942. [ 0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
  943. [ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
  944. [ 0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
  945. [ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
  946. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  947. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  948. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  949. [ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
  950. [ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
  951. [ 0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000
  952. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  953. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  954. [ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
  955. [ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
  956. [ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
  957. [ 0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
  958. [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  959. [ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
  960. [ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
  961. [ 0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
  962. [ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
  963. [ 0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
  964. [ 0.000000] sclk: source is sclk_a2m (0), rate is 200000000
  965. [ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
  966. [ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
  967. [ 0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
  968. [ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
  969. [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
  970. [ 0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000
  971. [ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
  972. [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x30aae000
  973. [ 0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
  974. [ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x42400000
  975. [ 0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x43c00000
  976. [ 0.000000] s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x445ab000
  977. [ 0.000000] s5pv210: 8388608 bytes system memory reserved for jpeg at 0x45dab000
  978. [ 0.000000] s5pv210: 6144000 bytes system memory reserved for fimd at 0x465ab000
  979. [ 0.000000] s5pv210: 3072000 bytes system memory reserved for texstream at 0x46b87000
  980. [ 0.000000] s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x46e75000
  981. [ 0.000000] s5pv210: 8388608 bytes system memory reserved for g2d at 0x471ae000
  982. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  983. [ 0.000000] Kernel command line: console=ttySAC0,115200 mem=512M root=/dev/mtdblock3 ethaddr=/$(ethaddr) rootfstype=yaffs2 init=/linuxrc ethaddr=ff:ff:ff:ff:ff:ff
  984. [ 0.000000] crzteh ddddd User MAC address: 00:00:00:0e:00:dd
  985. [ 0.000000] crzteh ddddd User MAC address: ff:ff:ff:ff:ff:ff
  986. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  987. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  988. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  989. [ 0.000000] Memory: 512MB = 512MB total
  990. [ 0.000000] Memory: 351512k/351512k available, 172776k reserved, 0K highmem
  991. [ 0.000000] Virtual kernel memory layout:
  992. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  993. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  994. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  995. [ 0.000000] vmalloc : 0xe0800000 - 0xfc000000 ( 440 MB)
  996. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  997. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  998. [ 0.000000] .init : 0xc0008000 - 0xc002d000 ( 148 kB)
  999. [ 0.000000] .text : 0xc002d000 - 0xc05a8000 (5612 kB)
  1000. [ 0.000000] .data : 0xc05a8000 - 0xc05ecca0 ( 276 kB)
  1001. [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  1002. [ 0.000000] Hierarchical RCU implementation.
  1003. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  1004. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  1005. [ 0.000000] NR_IRQS:393
  1006. [ 0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
  1007. [ 0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
  1008. [ 0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
  1009. [ 0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
  1010. [ 0.000000] console [ttySAC0] enabled
  1011. [ 0.015000] Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
  1012. [ 0.130000] pid_max: default: 32768 minimum: 301
  1013. [ 0.130000] Mount-cache hash table entries: 512
  1014. [ 0.130000] Initializing cgroup subsys debug
  1015. [ 0.130000] Initializing cgroup subsys cpuacct
  1016. [ 0.130000] Initializing cgroup subsys freezer
  1017. [ 0.130000] CPU: Testing write buffer coherency: ok
  1018. [ 0.135000] regulator: core version 0.5
  1019. [ 0.140000] regulator: dummy:
  1020. [ 0.140000] NET: Registered protocol family 16
  1021. [ 0.150000] S3C Power Management, Copyright 2004 Simtec Electronics
  1022. [ 0.150000] pmstats at 00000000
  1023. [ 0.155000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  1024. [ 0.160000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  1025. [ 0.165000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  1026. [ 0.170000] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
  1027. [ 0.175000] S5PV210: Initializing architecture
  1028. [ 0.180000] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
  1029. [ 0.185000] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
  1030. [ 0.190000] s3c24xx-pwm s3c24xx-pwm.2: tin at 22233333, tdiv at 22233333, tin=divclk, base 12
  1031. [ 0.195000] s3c24xx-pwm s3c24xx-pwm.3: tin at 22233333, tdiv at 22233333, tin=divclk, base 16
  1032. [ 0.200000] regulator: pd_audio_supply: 5000 mV normal
  1033. [ 0.205000] regulator: pd_cam_supply: 5000 mV normal
  1034. [ 0.210000] regulator: pd_tv_supply: 5000 mV normal
  1035. [ 0.215000] regulator: pd_lcd_supply: 5000 mV normal
  1036. [ 0.220000] regulator: pd_g3d_supply: 5000 mV normal
  1037. [ 0.225000] regulator: pd_mfc_supply: 5000 mV normal
  1038. [ 0.235000] bio: create slab <bio-0> at 0
  1039. [ 0.235000] SCSI subsystem initialized
  1040. [ 0.235000] usbcore: registered new interface driver usbfs
  1041. [ 0.240000] usbcore: registered new interface driver hub
  1042. [ 0.245000] usbcore: registered new device driver usb
  1043. [ 0.250000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  1044. [ 0.255000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  1045. [ 0.260000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
  1046. [ 0.265000] Advanced Linux Sound Architecture Driver Version 1.0.23.
  1047. [ 0.270000] cfg80211: Calling CRDA to update world regulatory domain
  1048. [ 0.275000] NET: Registered protocol family 2
  1049. [ 0.280000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  1050. [ 0.285000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  1051. [ 0.290000] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
  1052. [ 0.295000] TCP: Hash tables configured (established 16384 bind 16384)
  1053. [ 0.300000] TCP reno registered
  1054. [ 0.300000] UDP hash table entries: 256 (order: 1, 12288 bytes)
  1055. [ 0.305000] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  1056. [ 0.310000] NET: Registered protocol family 1
  1057. [ 0.315000] PMU: registered new PMU device of type 0
  1058. [ 0.320000] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
  1059. [ 0.325000] S5PV210 ADC driver, (c) 2010 Samsung Electronics
  1060. [ 0.330000] cpuidle: phy_regs_save:0x4fcbb000
  1061. [ 0.335000] Loaded driver for PL330 DMAC-0 s3c-pl330
  1062. [ 0.340000] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
  1063. [ 0.345000] Loaded driver for PL330 DMAC-1 s3c-pl330
  1064. [ 0.350000] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  1065. [ 0.355000] Loaded driver for PL330 DMAC-2 s3c-pl330
  1066. [ 0.360000] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  1067. [ 0.370000] ashmem: initialized
  1068. [ 0.370000] ROMFS MTD (C) 2007 Red Hat, Inc.
  1069. [ 0.370000] msgmni has been set to 686
  1070. [ 0.375000] alg: No test for stdrng (krng)
  1071. [ 0.410000] io scheduler noop registered
  1072. [ 0.410000] io scheduler deadline registered
  1073. [ 0.410000] io scheduler cfq registered (default)
  1074. [ 0.410000] s3cfb s3cfb: [fb2] dma: 0x465ab000, cpu: 0xe1000000, size: 0x005dc000
  1075. [ 0.415000] FIMD src sclk = 166750000
  1076. [ 0.535000] s3cfb s3cfb: registered successfully
  1077. [ 0.535000] Start display and show logo
  1078. [ 0.540000] TBS MOI: init timer_dev successful
  1079. [ 0.540000] PA FB = 0x465AB000, bits per pixel = 32
  1080. [ 0.540000] screen width=800 height=480 va=0xd65ab000 pa=0x465ab000
  1081. [ 0.540000] xres_virtual = 800, yres_virtual = 1920, xoffset = 0, yoffset = 0
  1082. [ 0.545000] fb_size=6144000
  1083. [ 0.550000] Back frameBuffer[0].VAddr=d6722000 PAddr=46722000 size=1536000
  1084. [ 0.555000] Back frameBuffer[1].VAddr=d6899000 PAddr=46899000 size=1536000
  1085. [ 0.560000] Back frameBuffer[2].VAddr=d6a10000 PAddr=46a10000 size=1536000
  1086. [ 0.565000] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
  1087. [ 0.570000] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
  1088. [ 0.575000] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
  1089. [ 0.580000] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
  1090. [ 0.590000] brd: module loaded
  1091. [ 0.595000] loop: module loaded
  1092. [ 0.595000] pmem_gpu1: 1 init
  1093. [ 0.595000] Android kernel panic handler initialized (bind=kpanic)
  1094. [ 0.600000] S3C NAND Driver, (c) 2008 Samsung Electronics
  1095. [ 0.605000] S3C NAND Driver is using hardware ECC.
  1096. [ 0.610000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
  1097. [ 0.615000] Creating 4 MTD partitions on "s5pv210-nand":
  1098. [ 0.620000] 0x0000000c0000-0x0000008c0000 : "kernel-safe"
  1099. [ 0.630000] 0x0000008c0000-0x0000048c0000 : "rootfs-safe"
  1100. [ 0.645000] 0x0000048c0000-0x0000050c0000 : "kernel"
  1101. [ 0.645000] 0x0000050c0000-0x000010000000 : "rootfs"
  1102. [ 0.680000] smsc911x: Driver version 2008-10-21.
  1103. [ 0.680000] smsc911x: Driver version A2008-10-21.
  1104. [ 0.680000] smsc911x: Driver version AA 2008-10-21.
  1105. [ 0.680000] smsc911x: Driver version AAA 2008-10-21.
  1106. [ 0.680000] LAN base phy in probe: 0xA8000000
  1107. [ 0.680000] LAN base virt in probe: 0xE088E000
  1108. [ 0.685000] smsc911x-mdio: probed
  1109. [ 0.685000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
  1110. [ 0.690000] net eth0: MAC Address: e2:ce:ce:21:cf:df
  1111. [ 0.695000] libertas_sdio: Libertas SDIO driver
  1112. [ 0.700000] libertas_sdio: Copyright Pierre Ossman
  1113. [ 0.705000] usbcore: registered new interface driver rt73usb
  1114. [ 0.710000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1115. [ 0.715000] s5p-ehci s5p-ehci: s5pv210 EHCI
  1116. [ 0.720000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  1117. [ 0.725000] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
  1118. [ 0.740000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  1119. [ 0.740000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1120. [ 0.740000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1121. [ 0.745000] usb usb1: Product: s5pv210 EHCI
  1122. [ 0.750000] usb usb1: Manufacturer: Linux 2.6.35.7 ehci_hcd
  1123. [ 0.755000] usb usb1: SerialNumber: s5pv210
  1124. [ 0.760000] hub 1-0:1.0: USB hub found
  1125. [ 0.765000] hub 1-0:1.0: 1 port detected
  1126. [ 0.770000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1127. [ 0.775000] s5p-ohci s5p-ohci: s5pv210 OHCI
  1128. [ 0.780000] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
  1129. [ 0.785000] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
  1130. [ 0.845000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  1131. [ 0.845000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1132. [ 0.845000] usb usb2: Product: s5pv210 OHCI
  1133. [ 0.845000] usb usb2: Manufacturer: Linux 2.6.35.7 ohci_hcd
  1134. [ 0.850000] usb usb2: SerialNumber: s5pv210
  1135. [ 0.855000] hub 2-0:1.0: USB hub found
  1136. [ 0.855000] hub 2-0:1.0: 1 port detected
  1137. [ 0.860000] Initializing USB Mass Storage driver...
  1138. [ 0.865000] usbcore: registered new interface driver usb-storage
  1139. [ 0.870000] USB Mass Storage support registered.
  1140. [ 0.875000] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
  1141. [ 0.875000] s3c-udc : version 15 March 2009 (DMA Mode)
  1142. [ 0.880000] android init
  1143. [ 0.880000] android_probe pdata: c05b56e0
  1144. [ 0.885000] android_bind
  1145. [ 0.890000] android_usb gadget: android_usb ready
  1146. [ 0.915000] f_acm init
  1147. [ 0.915000] android_register_function acm
  1148. [ 0.915000] f_adb init
  1149. [ 0.915000] android_register_function adb
  1150. [ 0.915000] f_mass_storage init
  1151. [ 0.915000] fsg_probe pdev: c05b4660, pdata: c05b5704
  1152. [ 0.915000] android_register_function usb_mass_storage
  1153. [ 0.920000] f_mtp init
  1154. [ 0.920000] android_register_function mtp
  1155. [ 0.925000] f_rndis init
  1156. [ 0.925000] android_register_function rndis
  1157. [ 0.930000] rndis_function_bind_config MAC: 02:02:45:46:4F:48
  1158. [ 0.935000] android_usb gadget: using random self ethernet address
  1159. [ 0.940000] android_usb gadget: using random host ethernet address
  1160. [ 0.945000] usb0: MAC ea:05:64:ff:0c:99
  1161. [ 0.950000] usb0: HOST MAC ce:96:14:8b:0a:ac
  1162. [ 0.955000] android_usb gadget: Mass Storage Function, version: 2009/09/11
  1163. [ 0.960000] android_usb gadget: Number of LUNs=1
  1164. [ 0.965000] lun0: LUN: removable file: (no medium)
  1165. [ 0.970000] adb_bind_config
  1166. [ 0.970000] mtp_bind_config
  1167. [ 0.975000] mice: PS/2 mouse device common for all mice
  1168. [ 0.980000] input: s3c-keypad as /devices/virtual/input/input0
  1169. [ 0.985000] s3c-keypad Initialized
  1170. [ 0.995000] S3C Keypad Driver
  1171. [ 0.995000] using rtc device, ds1338, for alarms
  1172. [ 0.995000] rtc-ds1307 0-0068: rtc core: registered ds1338 as rtc0
  1173. [ 1.000000] rtc-ds1307 0-0068: 56 bytes nvram
  1174. [ 1.005000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  1175. [ 1.010000] i2c /dev entries driver
  1176. [ 1.015000] Linux video capture interface: v2.00
  1177. [ 1.020000] gspca: main v2.9.0 registered
  1178. [ 1.025000] s3c-csis: Samsung MIPI-CSI2 driver probed successfully
  1179. [ 1.030000] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
  1180. [ 1.030000]
  1181. [ 1.035000] S3C JPEG Driver, (c) 2007 Samsung Electronics
  1182. [ 1.040000] JPEG driver for S5PV210
  1183. [ 1.045000] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
  1184. [ 1.050000] S5PC11X HPD Driver, (c) 2009 Samsung Electronics
  1185. [ 1.055000] S5PC11X CEC Driver, (c) 2009 Samsung Electronics
  1186. [ 1.060000] usbcore: registered new interface driver tbs2900
  1187. [ 1.065000] s3c_bat_init
  1188. [ 1.070000] sec-fake-battery sec-fake-battery: s3c_bat_probe
  1189. [ 1.075000] device-mapper: uevent: version 1.0.3
  1190. [ 1.080000] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  1191. [ 1.085000] cpuidle: using governor ladder
  1192. [ 1.090000] sdhci: Secure Digital Host Controller Interface driver
  1193. [ 1.095000] sdhci: Copyright(c) Pierre Ossman
  1194. [ 1.100000] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
  1195. [ 1.105000] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
  1196. [ 1.110000] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
  1197. [ 1.115000] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
  1198. [ 1.120000] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
  1199. [ 1.125000] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
  1200. [ 1.130000] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
  1201. [ 1.135000] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
  1202. [ 1.140000] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
  1203. [ 1.145000] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
  1204. [ 1.150000] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
  1205. [ 1.155000] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  1206. [ 1.160000] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
  1207. [ 1.165000] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
  1208. [ 1.170000] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
  1209. [ 1.175000] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
  1210. [ 1.180000] usb 1-1: new high speed USB device using s5p-ehci and address 2
  1211. [ 1.185000] usbcore: registered new interface driver usbhid
  1212. [ 1.190000] usbhid: USB HID core driver
  1213. [ 1.200000] logger: created 64K log 'log_main'
  1214. [ 1.200000] logger: created 256K log 'log_events'
  1215. [ 1.205000] logger: created 64K log 'log_radio'
  1216. [ 1.210000] logger: created 64K log 'log_system'
  1217. [ 1.215000] ALSA device list:
  1218. [ 1.215000] No soundcards found.
  1219. [ 1.220000] GACT probability NOT on
  1220. [ 1.225000] Mirror/redirect action on
  1221. [ 1.225000] u32 classifier
  1222. [ 1.230000] Actions configured
  1223. [ 1.235000] Netfilter messages via NETLINK v0.30.
  1224. [ 1.240000] nf_conntrack version 0.5.0 (5492 buckets, 21968 max)
  1225. [ 1.245000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  1226. [ 1.250000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  1227. [ 1.255000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  1228. [ 1.260000] ctnetlink v0.93: registering with nfnetlink.
  1229. [ 1.265000] xt_time: kernel timezone is -0000
  1230. [ 1.270000] ip_tables: (C) 2000-2006 Netfilter Core Team
  1231. [ 1.275000] arp_tables: (C) 2002 David S. Miller
  1232. [ 1.280000] TCP cubic registered
  1233. [ 1.285000] NET: Registered protocol family 10
  1234. [ 1.290000] lo: Disabled Privacy Extensions
  1235. [ 1.295000] Mobile IPv6
  1236. [ 1.295000] IPv6 over IPv4 tunneling driver
  1237. [ 1.300000] sit0: Disabled Privacy Extensions
  1238. [ 1.305000] ip6tnl0: Disabled Privacy Extensions
  1239. [ 1.310000] NET: Registered protocol family 17
  1240. [ 1.310000] NET: Registered protocol family 15
  1241. [ 1.315000] lib80211: common routines for IEEE802.11 drivers
  1242. [ 1.320000] ThumbEE CPU extension supported.
  1243. [ 1.325000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
  1244. [ 1.335000] regulator_init_complete: disabling pd_mfc_supply
  1245. [ 1.340000] regulator_init_complete: disabling pd_tv_supply
  1246. [ 1.345000] regulator_init_complete: disabling pd_cam_supply
  1247. [ 1.350000] regulator_init_complete: disabling pd_audio_supply
  1248. [ 1.355000] rtc-ds1307 0-0068: setting system clock to 2013-03-01 09:30:19 UTC (1362130219)
  1249. [ 1.360000] FIMC0 registered successfully
  1250. [ 1.365000] FIMC1 registered successfully
  1251. [ 1.370000] FIMC2 registered successfully
  1252. [ 1.370000] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
  1253. [ 1.380000] s5p-tvout s5p-tvout: hpd status is cable removed
  1254. [ 1.390000] DBUG_PORT must not use AFC!
  1255. [ 1.390000] yaffs: dev is 32505859 name is "mtdblock3" rw
  1256. [ 1.390000] yaffs: passed flags ""
  1257. [ 1.615000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  1258. [ 1.615000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  1259. [ 1.615000] usb 1-1: Product: USB2.0 Hub
  1260. [ 1.620000] hub 1-1:1.0: USB hub found
  1261. [ 1.620000] hub 1-1:1.0: 4 ports detected
  1262. [ 1.690000] mmc0: new high speed SDHC card at address e624
  1263. [ 1.690000] mmcblk0: mmc0:e624 SU08G 7.40 GiB
  1264. [ 1.690000] mmcblk0: p1
  1265. [ 1.980000] usb 1-1.1: new high speed USB device using s5p-ehci and address 3
  1266. [ 2.115000] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610
  1267. [ 2.115000] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  1268. [ 2.115000] usb 1-1.1: Product: USB2.0 Hub
  1269. [ 2.130000] hub 1-1.1:1.0: USB hub found
  1270. [ 2.135000] hub 1-1.1:1.0: 4 ports detected
  1271. [ 2.150000] List of all partitions:
  1272. [ 2.150000] 1f00 8192 mtdblock0 (driver?)
  1273. [ 2.150000] 1f01 65536 mtdblock1 (driver?)
  1274. [ 2.150000] 1f02 8192 mtdblock2 (driver?)
  1275. [ 2.150000] 1f03 179456 mtdblock3 (driver?)
  1276. [ 2.150000] b300 7761920 mmcblk0 driver: mmcblk
  1277. [ 2.155000] b301 7757824 mmcblk0p1
  1278. [ 2.160000] No filesystem could mount root, tried: yaffs2
  1279. [ 2.165000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)
  1280. [ 2.170000] Backtrace:
  1281. [ 2.175000] [<c0032064>] (dump_backtrace+0x0/0x110) from [<c0423e54>] (dump_stack+0x18/0x1c)
  1282. [ 2.180000] r6:00008000 r5:dfeb9007 r4:c05b90c4 r3:00000002
  1283. [ 2.185000] [<c0423e3c>] (dump_stack+0x0/0x1c) from [<c0423ed0>] (panic+0x78/0xf8)
  1284. [ 2.190000] [<c0423e58>] (panic+0x0/0xf8) from [<c0009048>] (mount_block_root+0x25c/0x2ac)
  1285. [ 2.195000] r3:00000000 r2:00000020 r1:dfc2ff60 r0:c0541975
  1286. [ 2.200000] [<c0008dec>] (mount_block_root+0x0/0x2ac) from [<c00090ec>] (mount_root+0x54/0x68)
  1287. [ 2.205000] [<c0009098>] (mount_root+0x0/0x68) from [<c0009270>] (prepare_namespace+0x170/0x1c8)
  1288. [ 2.210000] r5:c0028a39 r4:c05ecfc0
  1289. [ 2.210000] [<c0009100>] (prepare_namespace+0x0/0x1c8) from [<c00084fc>] (kernel_init+0x128/0x170)
  1290. [ 2.215000] r5:c00083d4 r4:c05ecd80
  1291. [ 2.220000] [<c00083d4>] (kernel_init+0x0/0x170) from [<c00543ac>] (do_exit+0x0/0x5e0)
  1292. [ 2.225000] r4:00000000 r3:00000000
  1293. [ 2.230000] Rebooting in 5 seconds..TBS MOI: turn on tuner device 1
  1294. [ 7.235000]
  1295. [ 7.235000] Restarting OK
  1296.  
  1297. U-Boot 1.3.4 (Jan 31 2013 - 17:33:20) for MOI2900
  1298.  
  1299.  
  1300. CPU: S5PV210@1000MHz(OK)
  1301. APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
  1302. MPLL = 667MHz, EPLL = 80MHz
  1303. HclkDsys = 166MHz, PclkDsys = 83MHz
  1304. HclkPsys = 133MHz, PclkPsys = 66MHz
  1305. SCLKA2M = 200MHz
  1306. Serial = CLKUART
  1307. Board: MOI2900
  1308. I2C: ready
  1309. DRAM: 512 MB
  1310. Flash: 8 MB
  1311. SD/MMC: Card init fail!
  1312. 0 MB
  1313. NAND: 256 MB
  1314.  
  1315.  
  1316. start normally!
  1317. MAC address: ff:ff:ff:ff:ff:ff
  1318. In: serial
  1319. Out: serial
  1320. Err: serial
  1321. checking mode for fastboot ...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!