SHARE
TWEET

Untitled

a guest Oct 21st, 2013 247 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. <6>[    0.000000] Initializing cgroup subsys cpu
  2.  
  3. <5>[    0.000000] Linux version 3.0.8+ (feng@ubuntu) (gcc version 4.4.3 (GCC) ) #724 SMP PREEMPT Wed Jun 19 18:22:40 CST 2013
  4.  
  5. <4>[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
  6.  
  7. <4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8.  
  9. <4>[    0.000000] Machine: RK30board
  10.  
  11. <6>[    0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
  12.  
  13. <6>[    0.000000] memory reserve: Memory(base:0x90c00000 size:12M) reserved for <fb0>
  14.  
  15. <6>[    0.000000] memory reserve: Memory(base:0x90000000 size:12M) reserved for <ipp buf>
  16.  
  17. <6>[    0.000000] memory reserve: Memory(base:0x8f400000 size:12M) reserved for <fb2>
  18.  
  19. <6>[    0.000000] memory reserve: Memory(base:0x8ec00000 size:8M) reserved for <camera_ipp_mem>
  20.  
  21. <6>[    0.000000] memory reserve: Total reserved 124M
  22.  
  23. <4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
  24.  
  25. <6>[    0.000000] bootconsole [earlycon0] enabled
  26.  
  27. <4>[    0.000000] CPU SRAM: copied sram code from c0b6a000 to fef00100 - fef02200
  28.  
  29. <4>[    0.000000] CPU SRAM: copied sram data from c0b6c100 to fef03000 - fef0385c
  30.  
  31. <6>[    0.000000] L310 cache controller enabled
  32.  
  33. <6>[    0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  34.  
  35. <4>[    0.000000] DDR DEBUG: version 1.00 20121016
  36.  
  37. <4>[    0.000000] DDR DEBUG: DDR3 Device
  38.  
  39. <4>[    0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB
  40.  
  41. <4>[    0.000000] DDR DEBUG: init success!!! freq=360MHz
  42.  
  43. <4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  44.  
  45. <4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  46.  
  47. <4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  48.  
  49. <4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  50.  
  51. <4>[    0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  52.  
  53. <4>[    0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  54.  
  55. <4>[    0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  56.  
  57. <4>[    0.000000] rk30_iomux_init
  58.  
  59. <4>[    0.000000] Boot mode: 6 flag: 0xc3524200
  60.  
  61. <7>[    0.000000] On node 0 totalpages: 230400
  62.  
  63. <7>[    0.000000] free_area_init_node: node 0, pgdat c0b68e60, node_mem_map c15f3000
  64.  
  65. <7>[    0.000000]   Normal zone: 1744 pages used for memmap
  66.  
  67. <7>[    0.000000]   Normal zone: 0 pages reserved
  68.  
  69. <7>[    0.000000]   Normal zone: 189744 pages, LIFO batch:31
  70.  
  71. <7>[    0.000000]   HighMem zone: 304 pages used for memmap
  72.  
  73. <7>[    0.000000]   HighMem zone: 38608 pages, LIFO batch:7
  74.  
  75. <6>[    0.000000] PERCPU: Embedded 7 pages/cpu @c1dfb000 s7072 r8192 d13408 u32768
  76.  
  77. <7>[    0.000000] pcpu-alloc: s7072 r8192 d13408 u32768 alloc=8*4096
  78.  
  79. <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
  80.  
  81. <4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 228352
  82.  
  83. <5>[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00230000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x000C0000@0x00018000(backup),0x00040000@0x000D8000(cache),0x00200000@0x00118000(userdata),0x00002000@0x00318000(kpanic),0x000E0000@0x0031A000(system),-@0x003FA000(user) bootver=2013-03-27#1.28 firmware_ver=4.0.4
  84.  
  85. <6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  86.  
  87. <6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  88.  
  89. <6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  90.  
  91. <6>[    0.000000] Memory: 748MB 152MB = 900MB total
  92.  
  93. <5>[    0.000000] Memory: 891900k/891900k available, 156676k reserved, 155648K highmem
  94.  
  95. <5>[    0.000000] Virtual kernel memory layout:
  96.  
  97. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  98.  
  99. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  100.  
  101. <5>[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
  102.  
  103. <5>[    0.000000]     vmalloc : 0xf7000000 - 0xfe800000   ( 120 MB)
  104.  
  105. <5>[    0.000000]     lowmem  : 0xc0000000 - 0xf6800000   ( 872 MB)
  106.  
  107. <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  108.  
  109. <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  110.  
  111. <5>[    0.000000]       .init : 0xc0408000 - 0xc052a000   (1160 kB)
  112.  
  113. <5>[    0.000000]       .text : 0xc052a000 - 0xc0b03f14   (5992 kB)
  114.  
  115. <5>[    0.000000]       .data : 0xc0b04000 - 0xc0b69980   ( 407 kB)
  116.  
  117. <5>[    0.000000]        .bss : 0xc0b6d024 - 0xc15f2bb8   (10775 kB)
  118.  
  119. <6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  120.  
  121. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  122.  
  123. <6>[    0.000000] NR_IRQS:416
  124.  
  125. <4>[    0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
  126.  
  127. <6>[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  128.  
  129. <6>[    0.000000] Console: colour dummy device 80x30
  130.  
  131. <6>[    0.004956] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  132.  
  133. <6>[    0.013902] pid_max: default: 32768 minimum: 301
  134.  
  135. <6>[    0.019157] Mount-cache hash table entries: 512
  136.  
  137. <6>[    0.024639] Initializing cgroup subsys debug
  138.  
  139. <6>[    0.029280] Initializing cgroup subsys cpuacct
  140.  
  141. <6>[    0.034145] Initializing cgroup subsys freezer
  142.  
  143. <6>[    0.039028] CPU: Testing write buffer coherency: ok
  144.  
  145. <4>[    0.145029] CPU1: Booted secondary processor
  146.  
  147. <6>[    0.145073] Brought up 2 CPUs
  148.  
  149. <6>[    0.153033] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
  150.  
  151. <6>[    0.160215] devtmpfs: initialized
  152.  
  153. <6>[    0.171172] NET: Registered protocol family 16
  154.  
  155. <4>[    0.176009] last_log: 0xee500000 0xc0b74018
  156.  
  157. <6>[    0.282878] rk29sdk_wifi_bt_gpio_control_init: init finished
  158.  
  159. <6>[    0.293488] console [ttyFIQ0] enabled, bootconsole disabled
  160.  
  161. <6>[    0.299605] Registered FIQ tty driver ee48fc00
  162.  
  163. <6>[    0.312041] bio: create slab <bio-0> at 0
  164.  
  165. <5>[    0.316445] SCSI subsystem initialized
  166.  
  167. <6>[    0.316627] usbcore: registered new interface driver usbfs
  168.  
  169. <6>[    0.316706] usbcore: registered new interface driver hub
  170.  
  171. <6>[    0.331003] usbcore: registered new device driver usb
  172.  
  173. <6>[    0.331282] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
  174.  
  175. <6>[    0.331447] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
  176.  
  177. <6>[    0.331616] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  178.  
  179. <6>[    0.331725] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
  180.  
  181. <6>[    0.331842] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
  182.  
  183. <6>[    0.362554] rk30-adc rk30-adc: rk30 adc: driver initialized
  184.  
  185. <6>[    0.362792] Advanced Linux Sound Architecture Driver Version 1.0.24.
  186.  
  187. <6>[    0.363191] Bluetooth: Core ver 2.16
  188.  
  189. <6>[    0.363240] NET: Registered protocol family 31
  190.  
  191. <6>[    0.363252] Bluetooth: HCI device and connection manager initialized
  192.  
  193. <6>[    0.363267] Bluetooth: HCI socket layer initialized
  194.  
  195. <6>[    0.363280] Bluetooth: L2CAP socket layer initialized
  196.  
  197. <6>[    0.363305] Bluetooth: SCO socket layer initialized
  198.  
  199. <4>[    0.364373] rk fb probe ok!
  200.  
  201. <4>[    0.403174] tps65910_pre_init,line=54
  202.  
  203. <6>[    0.407202] TPS65910 Set default voltage.
  204.  
  205. <4>[    0.409599] tps65910_pre_init,line=246
  206.  
  207. <6>[    0.409937] cfg80211: Calling CRDA to update world regulatory domain
  208.  
  209. <4>[    0.424268] tps65910_post_init,line=254
  210.  
  211. <4>[    0.424281] tps65910_post_init:g_pmic_type=2
  212.  
  213. <4>[    0.435289] tps65910_post_init set vio vcc_io=3300000mV end
  214.  
  215. <4>[    0.436531] tps65910_post_init set vpll vdd11=2500000mV end
  216.  
  217. <4>[    0.437763] tps65910_post_init set vdig2 vdd11=1100000mV end
  218.  
  219. <4>[    0.545598] tps65910_post_init set vaux33 vcc_tp=3300000mV end
  220.  
  221. <4>[    0.548474] tps65910_post_init set vdd1 vdd_cpu=1200000mV end
  222.  
  223. <4>[    0.551346] tps65910_post_init set vdd2 vcc_ddr=1237500mV end
  224.  
  225. <4>[    0.553273] tps65910_post_init set vdig1 vcc18_cif=1800000mV end
  226.  
  227. <4>[    0.555104] tps65910_post_init set vaux1 vcc25_hdmi=2500000mV end
  228.  
  229. <4>[    0.556333] tps65910_post_init set vaux2 vcca33=3300000mV end
  230.  
  231. <4>[    0.557562] tps65910_post_init set vdac vccio_wl=1800000mV end
  232.  
  233. <4>[    0.559487] tps65910_post_init set vmmc vcc28_cif=2800000mV end
  234.  
  235. <4>[    0.560201] tps65910_post_init,line=361 END
  236.  
  237. <4>[    0.560214] tps65910_i2c_probe:irq=324,irq_base=352,gpio_base=352
  238.  
  239. <6>[    0.570403] tps65910-rtc tps65910-rtc: rtc core: registered tps65910 as rtc0
  240.  
  241. <4>[    0.574235] tps65910_rtc_probe:ok
  242.  
  243. <6>[    0.574298] Switching to clocksource timer1
  244.  
  245. <6>[    0.574507] Switched to NOHz mode on CPU #0
  246.  
  247. <4>[    0.574552] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf701c000
  248.  
  249. <6>[    0.575064] Switched to NOHz mode on CPU #1
  250.  
  251. <4>[    0.624487] lcdc0: dclk:66500000>>fps:53 rk30_load_screen for lcdc0 ok!
  252.  
  253. <4>[    0.647191] fb0:phy:90c00000>>vir:f8000000>>len:0xc00000
  254.  
  255. <4>[    0.647374] rk_fb_register>>>>>fb0
  256.  
  257. <4>[    0.647527] rk_fb_register>>>>>fb1
  258.  
  259. <4>[    0.647539] lcdc0 wakeup from stanby
  260.  
  261. <6>[    0.647548] lcdc0 win1 open
  262.  
  263. <4>[    0.647567] show logo s(800 1280), b(1280 800) compressed 1
  264.  
  265. <4>[    0.664366] show logo done
  266.  
  267. <4>[    0.680595] rk30 lcdc0 probe ok!
  268.  
  269. <4>[    0.680656] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf7028000
  270.  
  271. <4>[    0.680730] lcdc1: dclk:74250000>>fps:60 rk30_load_screen for lcdc1 ok!
  272.  
  273. <4>[    0.706604] fb2:phy:8f400000>>vir:f9000000>>len:0xc00000
  274.  
  275. <4>[    0.706811] rk_fb_register>>>>>fb2
  276.  
  277. <4>[    0.706959] rk_fb_register>>>>>fb3
  278.  
  279. <4>[    0.706970] rk30 lcdc1 probe ok!
  280.  
  281. <4>[    0.707019] boot with tps65910 need  pwm_regultor
  282.  
  283. <4>[    0.707069] pwm_regulator_probe:n_voltages=17
  284.  
  285. <4>[    0.707229] pwm_regulator.0: driver initialized
  286.  
  287. <4>[    0.707240] rk30 pwm regulator is ok with pmu tps65910
  288.  
  289. <4>[    0.717286] pwm_regulator_probe set vdd_core=1100000mV end
  290.  
  291. <4>[    0.723781] charge current adc 0
  292.  
  293. <4>[    0.723828] battery max voltage 4222
  294.  
  295. <4>[    0.724136] battery coff update to 323570
  296.  
  297. <4>[    0.724419] adc battery last capacity is 14
  298.  
  299. <4>[    0.724481] adc_battery ac 0x145 usb 0xffffffff charge 0x146
  300.  
  301. <4>[    0.734359] adc_battery status changed from 0 to 9
  302.  
  303. <6>[    0.771439] NET: Registered protocol family 2
  304.  
  305. <6>[    0.771565] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  306.  
  307. <6>[    0.771906] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  308.  
  309. <6>[    0.773748] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  310.  
  311. <6>[    0.774840] TCP: Hash tables configured (established 131072 bind 65536)
  312.  
  313. <6>[    0.774854] TCP reno registered
  314.  
  315. <6>[    0.774870] UDP hash table entries: 512 (order: 2, 16384 bytes)
  316.  
  317. <6>[    0.774909] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  318.  
  319. <6>[    0.775247] NET: Registered protocol family 1
  320.  
  321. <4>[    0.884464] RK29 Backlight Driver Initialized.
  322.  
  323. <6>[    0.884641] Unpacking initramfs...
  324.  
  325. <6>[    0.999923] Freeing initrd memory: 2240K
  326.  
  327. <6>[    1.000104] rk30-tsadc rk30-tsadc: initialized
  328.  
  329. <6>[    1.009476] Loaded driver for PL330 DMAC-1 rk29-pl330
  330.  
  331. <6>[    1.009496]       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  332.  
  333. <6>[    1.009645] Loaded driver for PL330 DMAC-2 rk29-pl330
  334.  
  335. <6>[    1.009660]       DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  336.  
  337. <4>[    1.038690] highmem bounce pool size: 64 pages
  338.  
  339. <6>[    1.038957] ashmem: initialized
  340.  
  341. <6>[    1.046046] fuse init (API version 7.16)
  342.  
  343. <6>[    1.047229] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  344.  
  345. <6>[    1.047247] io scheduler noop registered
  346.  
  347. <6>[    1.047256] io scheduler deadline registered
  348.  
  349. <6>[    1.047302] io scheduler cfq registered (default)
  350.  
  351. <6>[    1.056608] rga: Driver loaded succesfully
  352.  
  353. <6>[    1.057154] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
  354.  
  355. <6>[    1.094375] rk_serial rk_serial.0: membase 0xf704c000
  356.  
  357. <6>[    1.094427] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
  358.  
  359. <6>[    1.134421] rk_serial rk_serial.3: membase 0xf7050000
  360.  
  361. <6>[    1.135270] Rockchip ion module(version: 1.0) is successfully loaded
  362.  
  363. <6>[    1.143345] loop: module loaded
  364.  
  365. <6>[    1.143648] Android kernel panic handler initialized (bind=kpanic)
  366.  
  367. <6>[    1.145937] PPP generic driver version 2.4.2
  368.  
  369. <6>[    1.146432] PPP Deflate Compression module registered
  370.  
  371. <6>[    1.146473] PPP BSD Compression module registered
  372.  
  373. <6>[    1.148146] PPP MPPE Compression module registered
  374.  
  375. <6>[    1.148190] NET: Registered protocol family 24
  376.  
  377. <6>[    1.148231] tun: Universal TUN/TAP device driver, 1.6
  378.  
  379. <6>[    1.148264] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  380.  
  381. <6>[    1.148868] usbcore: registered new interface driver asix
  382.  
  383. <6>[    1.149031] usbcore: registered new interface driver cdc_ether
  384.  
  385. <6>[    1.149203] usbcore: registered new interface driver dm9620
  386.  
  387. <6>[    1.149361] usbcore: registered new interface driver SR9700_android
  388.  
  389. <6>[    1.149509] usbcore: registered new interface driver net1080
  390.  
  391. <6>[    1.149654] usbcore: registered new interface driver cdc_subset
  392.  
  393. <6>[    1.149801] usbcore: registered new interface driver zaurus
  394.  
  395. <6>[    1.149869] cdc_ncm: 04-Aug-2011
  396.  
  397. <6>[    1.150054] usbcore: registered new interface driver cdc_ncm
  398.  
  399. <4>[    1.150093] Rockchip WiFi SYS interface (V1.00) ...
  400.  
  401. <6>[    1.150213] Initializing USB Mass Storage driver...
  402.  
  403. <6>[    1.150407] usbcore: registered new interface driver usb-storage
  404.  
  405. <6>[    1.150444] USB Mass Storage support registered.
  406.  
  407. <6>[    1.150753] usbcore: registered new interface driver usbserial
  408.  
  409. <6>[    1.150882] USB Serial support registered for generic
  410.  
  411. <6>[    1.151042] usbcore: registered new interface driver usbserial_generic
  412.  
  413. <6>[    1.151081] usbserial: USB Serial Driver core
  414.  
  415. <6>[    1.151197] USB Serial support registered for GSM modem (1-port)
  416.  
  417. <6>[    1.151383] usbcore: registered new interface driver option
  418.  
  419. <6>[    1.151421] option: v0.7.2:USB Driver for GSM modems
  420.  
  421. <6>[    1.364835] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
  422.  
  423. <6>[    1.364856] usb20_otg usb20_otg: DWC OTG Controller
  424.  
  425. <6>[    1.364880] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
  426.  
  427. <6>[    1.364948] usb20_otg usb20_otg: irq 48, io mem 0x00000000
  428.  
  429. <6>[    1.364957] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
  430.  
  431. <6>[    1.365001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  432.  
  433. <6>[    1.365012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  434.  
  435. <6>[    1.365022] usb usb1: Product: DWC OTG Controller
  436.  
  437. <6>[    1.365030] usb usb1: Manufacturer: Linux 3.0.8+ dwc_otg_hcd
  438.  
  439. <6>[    1.365037] usb usb1: SerialNumber: usb20_otg
  440.  
  441. <6>[    1.365363] hub 1-0:1.0: USB hub found
  442.  
  443. <6>[    1.365378] hub 1-0:1.0: 1 port detected
  444.  
  445. <6>[    1.365999] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7100000
  446.  
  447. <6>[    1.577319] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  448.  
  449. <6>[    1.577342] usb20_host usb20_host: DWC OTG Controller
  450.  
  451. <6>[    1.577361] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  452.  
  453. <6>[    1.577385] usb20_host usb20_host: irq 49, io mem 0x00000000
  454.  
  455. <6>[    1.577422] DWC_OTG: Init: Port Power? op_state=1
  456.  
  457. <6>[    1.577428] DWC_OTG: Init: Power Port (0)
  458.  
  459. <6>[    1.577459] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  460.  
  461. <6>[    1.577469] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  462.  
  463. <6>[    1.577478] usb usb2: Product: DWC OTG Controller
  464.  
  465. <6>[    1.577485] usb usb2: Manufacturer: Linux 3.0.8+ host20_hcd
  466.  
  467. <6>[    1.577491] usb usb2: SerialNumber: usb20_host
  468.  
  469. <6>[    1.577732] hub 2-0:1.0: USB hub found
  470.  
  471. <6>[    1.577746] hub 2-0:1.0: 1 port detected
  472.  
  473. <6>[    1.578789] android_usb gadget: Mass Storage Function, version: 2009/09/11
  474.  
  475. <6>[    1.578799] android_usb gadget: Number of LUNs=2
  476.  
  477. <6>[    1.578807]  lun0: LUN: removable file: (no medium)
  478.  
  479. <6>[    1.578814]  lun1: LUN: removable file: (no medium)
  480.  
  481. <6>[    1.578943] android_usb gadget: android_usb ready
  482.  
  483. <6>[    1.579092] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
  484.  
  485. <4>[    1.579229] +++++++++++++++++++++++++++++liqing.
  486.  
  487. <4>[    1.579321] w++++++goodix_ts_probe gt28x goodix_init_platform_hw:0x0,0x0
  488.  
  489. <4>[    1.684425] <--GT msg-->TOUCH_MAX_WIDTH  : 0x768
  490.  
  491. <4>[    1.684433] <--GT msg-->TOUCH_MAX_HEIGHT : 0x1024
  492.  
  493. <6>[    1.684548] input: Goodix TouchScreen of Guitar  as /devices/virtual/input/input1
  494.  
  495. <4>[    1.684646] <--GT msg-->Register input device successfully!
  496.  
  497. <4>[    1.684654] <--GT msg-->Request int port successfully!
  498.  
  499. <3>[    1.684677] Goodix-TS 2-005d: Failed to request GPIO:312, ERRNO:-16
  500.  
  501. <6>[    1.684686] Goodix-TS 2-005d: Start Goodix TouchScreen of Guitar  in interrupt mode
  502.  
  503. <3>[    1.754669] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...
  504.  
  505. <3>[    1.755004] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...
  506.  
  507. <3>[    1.755334] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...
  508.  
  509. <3>[    1.784706] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...
  510.  
  511. <3>[    1.785040] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...
  512.  
  513. <3>[    1.785372] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...
  514.  
  515. <3>[    1.814668] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...
  516.  
  517. <3>[    1.815007] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...
  518.  
  519. <3>[    1.815342] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...
  520.  
  521. <3>[    1.844349] Goodix-TS 2-005d: Warnning: I2C communication might be ERROR!
  522.  
  523. <4>[    1.844360] <--GT msg-->I2C test failed. I2C addr:5d
  524.  
  525. <5>[    1.844368] Goodix-TS 2-005d: The driver is removing...
  526.  
  527. <4>[    1.894779] Goodix-TS: probe of 2-005d failed with error -1
  528.  
  529. <1>[    1.894928] ilitek_init
  530.  
  531. <4>[    1.894985] get ctp_ilitek_use_interupt=0
  532.  
  533. <1>[    1.895305] ilitek_i2c_probe, i2c new style format
  534.  
  535. <4>[    1.895342] ilitek_i2c_probe, IRQ: 0x0
  536.  
  537. <4>[    1.895575] goodix_init_platform_hw:0x0,0x0
  538.  
  539. <1>[    2.124460] __ilitek_i2c_register_device, add i2c device, success
  540.  
  541. <1>[    2.124513] __ilitek_i2c_register_device, client.addr: 0x41
  542.  
  543. <1>[    2.124550] __ilitek_i2c_register_device, client.adapter: 0xEE414070
  544.  
  545. <1>[    2.124590] __ilitek_i2c_register_device, client.driver: 0xC0B4B608
  546.  
  547. <3>[    2.234663] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...
  548.  
  549. <3>[    2.234977] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...
  550.  
  551. <3>[    2.235282] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...
  552.  
  553. <3>[    2.255074] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...
  554.  
  555. <3>[    2.255447] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...
  556.  
  557. <3>[    2.255856] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...
  558.  
  559. <3>[    2.274544] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...
  560.  
  561. <3>[    2.274702] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...
  562.  
  563. <3>[    2.274859] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...
  564.  
  565. <3>[    2.294661] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...
  566.  
  567. <3>[    2.294979] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...
  568.  
  569. <3>[    2.295135] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...
  570.  
  571. <1>[    2.314349] ilitek_i2c_read_info, i2c read error, ret -11
  572.  
  573. <1>[    2.314385] ilitek_i2c_remove
  574.  
  575. <1>[    2.314439] ilitek_init, register i2c device, error
  576.  
  577. <6>[    2.314449] BYD Touchscreen driver, (c) 2012 BYD Systech Ltd.
  578.  
  579. <4>[    2.314459] ==================byd693x_ts_init===========================
  580.  
  581. <4>[    2.314469] Version =byd693x_20130320_12:10_V1.6_Richard@Raysens
  582.  
  583. <4>[    2.314583] goodix_init_platform_hw:0x0,0x0
  584.  
  585. <4>[    2.724775] ctp byd693x registered
  586.  
  587. <4>[    2.724821] Failed to request GPIO:306, ERRNO:-16
  588.  
  589. <4>[    2.746394] battery report 3711 15 real 15
  590.  
  591. <4>[    2.822759] Raysens CTP Panel Type:358
  592.  
  593. <4>[    2.822766] Raysens CTP date info:4139214:18
  594.  
  595. <4>[    2.822772] Raysens CTP Chip Num:14:18
  596.  
  597. <4>[    2.822777] Raysens CTP Type:RS07MD0358
  598.  
  599. <4>[    2.822782] Raysens CTP FPC Type:F224V3.0
  600.  
  601. <4>[    2.822787] Raysens CTP Chip Type:B6932
  602.  
  603. <4>[    2.822792] Raysens CTP Version:4006
  604.  
  605. <6>[    2.832902] input: byd693x-ts as /devices/virtual/input/input2
  606.  
  607. <4>[    2.833011] Install BYD BF6932 Touchscreen driver successfully
  608.  
  609. <4>[    2.833155] BMA250_init: after fetch_sysconfig_para:  normal_i2c: 0x18. normal_i2c[1]: 0xfffe
  610.  
  611. <6>[    2.833246] gsensor_detect: Detected chip bma250 at adapter 0, address 0x18
  612.  
  613. <3>[    2.833832] i2c i2c-0: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2...
  614.  
  615. <3>[    2.834366] i2c i2c-0: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1...
  616.  
  617. <3>[    2.834901] i2c i2c-0: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0...
  618.  
  619. <3>[    2.835434] i2c i2c-0: No ack, Maybe slave(addr: 0x8) not exist or abnormal power-on, retry 2...
  620.  
  621. <3>[    2.835966] i2c i2c-0: No ack, Maybe slave(addr: 0x8) not exist or abnormal power-on, retry 1...
  622.  
  623. <3>[    2.836497] i2c i2c-0: No ack, Maybe slave(addr: 0x8) not exist or abnormal power-on, retry 0...
  624.  
  625. <6>[    2.836507] BMA250 & BM222 Device not fount! id:0xfffffff5
  626.  
  627. <6>[    2.836514] Bosch Sensortec Device not found,                     i2c error -11
  628.  
  629. <4>[    2.836526] bma250: probe of 0-0018 failed with error -1
  630.  
  631. <3>[    3.034447] rk30_i2c rk30_i2c.3: Addr[0x18] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x0
  632.  
  633. <4>[    3.054426] rk30_i2c rk30_i2c.3: I2C_CON: start bit is set
  634.  
  635. <3>[    3.274437] rk30_i2c rk30_i2c.4: Addr[0x18] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x0
  636.  
  637. <4>[    3.294435] rk30_i2c rk30_i2c.4: I2C_CON: start bit is set
  638.  
  639. <4>[    3.314440] ======mma8452_init=========.
  640.  
  641. <4>[    3.314492] mma8452_init: after fetch_sysconfig_para:  normal_i2c: 0x1d. normal_i2c[1]: 0xfffe
  642.  
  643. <6>[    3.314851] gsensor_detect: addr= 1c
  644.  
  645. <3>[    3.315461] i2c i2c-0: No ack, Maybe slave(addr: 0x1c) not exist or abnormal power-on, retry 2...
  646.  
  647. <3>[    3.316081] i2c i2c-0: No ack, Maybe slave(addr: 0x1c) not exist or abnormal power-on, retry 1...
  648.  
  649. <3>[    3.316699] i2c i2c-0: No ack, Maybe slave(addr: 0x1c) not exist or abnormal power-on, retry 0...
  650.  
  651. <6>[    3.316753] gsensor_detect: addr= 1d
  652.  
  653. <4>[    3.317359] gsensor_detect: mma8452 equipment is detected!
  654.  
  655. <4>[    3.317411] acc mma8452 registered,dir 4 ,units 1024
  656.  
  657. <6>[    3.420727] mma8452 0-001d: build time Feb 27 2013 14:08:50
  658.  
  659. <6>[    3.420832] input: mma8452 as /devices/virtual/input/input3
  660.  
  661. <4>[    3.420948] ==register_early_suspend =
  662.  
  663. <4>[    3.421109] add mma8452 i2c driver
  664.  
  665. <6>[    3.421298] using rtc device, tps65910, for alarms
  666.  
  667. <6>[    3.421389] i2c /dev entries driver
  668.  
  669. <6>[    3.421890] lirc_dev: IR Remote Control driver registered, major 250
  670.  
  671. <6>[    3.421900] IR NEC protocol handler initialized
  672.  
  673. <6>[    3.421907] IR RC5(x) protocol handler initialized
  674.  
  675. <6>[    3.421913] IR RC6 protocol handler initialized
  676.  
  677. <6>[    3.421919] IR JVC protocol handler initialized
  678.  
  679. <6>[    3.421925] IR Sony protocol handler initialized
  680.  
  681. <6>[    3.421932] IR RC5 (streamzap) protocol handler initialized
  682.  
  683. <6>[    3.421938] IR LIRC bridge handler initialized
  684.  
  685. <6>[    3.421944] Linux video capture interface: v2.00
  686.  
  687. <4>[    3.422129] start_charge_logo_display
  688.  
  689. <6>[    3.422697] device-mapper: uevent: version 1.0.3
  690.  
  691. <6>[    3.422905] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  692.  
  693. <6>[    3.423074] Bluetooth: HCI UART driver ver 2.2
  694.  
  695. <6>[    3.423084] Bluetooth: HCI H4 protocol initialized
  696.  
  697. <6>[    3.423091] Bluetooth: HCILL protocol initialized
  698.  
  699. <6>[    3.434392] cpuidle: using governor ladder
  700.  
  701. <6>[    3.434401] cpuidle: using governor menu
  702.  
  703. <6>[    3.500146]
  704.  
  705. <6>[    3.500148] drivers/mmc/core/core.c...1827..  ===== mmc_rescan Begin....[mmc0]
  706.  
  707. <6>[    3.505206] rk29_sdmmc_change_clk_div..1945..  newDiv=83, newCLK=298Khz [sd_mmc]
  708.  
  709. <6>[    3.505246] .Line3931..The End of SDMMC-probe Ver.4.09 The last modify date is 2012-10-12.  [sd_mmc]
  710.  
  711. <6>[    3.505361] .Line3931..The End of SDMMC-probe Ver.4.09 The last modify date is 2012-10-12.  [sdio]
  712.  
  713. <7>[    3.505454] Registered led device: button-backlight
  714.  
  715. <6>[    3.506515] usbcore: registered new interface driver usbhid
  716.  
  717. <6>[    3.506524] usbhid: USB HID core driver
  718.  
  719. <6>[    3.506797] logger: created 256K log 'log_main'
  720.  
  721. <6>[    3.506854] logger: created 256K log 'log_events'
  722.  
  723. <6>[    3.506909] logger: created 256K log 'log_radio'
  724.  
  725. <6>[    3.506964] logger: created 256K log 'log_system'
  726.  
  727. <4>[    3.507346] i2c-core: driver [ES8323] using legacy suspend method
  728.  
  729. <4>[    3.507356] i2c-core: driver [ES8323] using legacy resume method
  730.  
  731. <6>[    3.507476] ES8323 audio_card_init
  732.  
  733. <6>[    3.507483] XXXXEnter::audio_card_init----201
  734.  
  735. <4>[    3.507620] es8323_probe
  736.  
  737. <3>[    3.541783] ES8323 0-0010: Failed to add route Left DAC->Left Mixer
  738.  
  739. <3>[    3.541812] ES8323 0-0010: ES8323.0-0010: Failed to add 3D Mode: -16
  740.  
  741. <3>[    3.541875] ES8323 0-0010: Failed to add route Left DAC->Left Mixer
  742.  
  743. <6>[    3.541885] Enter::rk29_es8323_init----138
  744.  
  745. <3>[    3.545508] ES8323 0-0010: asoc: failed to add kcontrol Left Line Mux
  746.  
  747. <3>[    3.545525] ES8323 0-0010: asoc: failed to add kcontrol Right PGA Mux
  748.  
  749. <3>[    3.545540] ES8323 0-0010: asoc: failed to add kcontrol Left PGA Mux
  750.  
  751. <3>[    3.545553] ES8323 0-0010: asoc: failed to add kcontrol Right ADC Mux
  752.  
  753. <3>[    3.545566] ES8323 0-0010: asoc: failed to add kcontrol Left ADC Mux
  754.  
  755. <3>[    3.545580] ES8323 0-0010: asoc: failed to add kcontrol Differential Mux
  756.  
  757. <4>[    3.545597] ES8323 0-0010: ASoC: Failed to create POST debugfs file
  758.  
  759. <4>[    3.545607] ES8323 0-0010: ASoC: Failed to create PRE debugfs file
  760.  
  761. <4>[    3.545616] ES8323 0-0010: ASoC: Failed to create RINPUT2 debugfs file
  762.  
  763. <4>[    3.545625] ES8323 0-0010: ASoC: Failed to create RINPUT1 debugfs file
  764.  
  765. <4>[    3.545634] ES8323 0-0010: ASoC: Failed to create LINPUT2 debugfs file
  766.  
  767. <4>[    3.545643] ES8323 0-0010: ASoC: Failed to create LINPUT1 debugfs file
  768.  
  769. <4>[    3.545652] ES8323 0-0010: ASoC: Failed to create VREF debugfs file
  770.  
  771. <4>[    3.545661] ES8323 0-0010: ASoC: Failed to create ROUT2 debugfs file
  772.  
  773. <4>[    3.545670] ES8323 0-0010: ASoC: Failed to create LOUT2 debugfs file
  774.  
  775. <4>[    3.545679] ES8323 0-0010: ASoC: Failed to create ROUT1 debugfs file
  776.  
  777. <4>[    3.545688] ES8323 0-0010: ASoC: Failed to create LOUT1 debugfs file
  778.  
  779. <4>[    3.545697] ES8323 0-0010: ASoC: Failed to create Left Out 1 debugfs file
  780.  
  781. <4>[    3.545707] ES8323 0-0010: ASoC: Failed to create Right Out 1 debugfs file
  782.  
  783. <4>[    3.545716] ES8323 0-0010: ASoC: Failed to create Left Out 2 debugfs file
  784.  
  785. <4>[    3.545726] ES8323 0-0010: ASoC: Failed to create Right Out 2 debugfs file
  786.  
  787. <4>[    3.545735] ES8323 0-0010: ASoC: Failed to create Right Mixer debugfs file
  788.  
  789. <4>[    3.545745] ES8323 0-0010: ASoC: Failed to create Left Mixer debugfs file
  790.  
  791. <4>[    3.545754] ES8323 0-0010: ASoC: Failed to create Left ADC debugfs file
  792.  
  793. <4>[    3.545764] ES8323 0-0010: ASoC: Failed to create Right ADC debugfs file
  794.  
  795. <4>[    3.545775] ES8323 0-0010: ASoC: Failed to create Right Line Mux debugfs file
  796.  
  797. <3>[    3.545785] ES8323 0-0010: asoc: failed to add kcontrol Left Line Mux
  798.  
  799. <4>[    3.545795] ES8323 0-0010: ASoC: Failed to create Left Line Mux debugfs file
  800.  
  801. <3>[    3.545806] ES8323 0-0010: asoc: failed to add kcontrol Right PGA Mux
  802.  
  803. <4>[    3.545816] ES8323 0-0010: ASoC: Failed to create Right PGA Mux debugfs file
  804.  
  805. <3>[    3.547862] ES8323 0-0010: asoc: failed to add kcontrol Left PGA Mux
  806.  
  807. <4>[    3.547874] ES8323 0-0010: ASoC: Failed to create Left PGA Mux debugfs file
  808.  
  809. <3>[    3.547885] ES8323 0-0010: asoc: failed to add kcontrol Right ADC Mux
  810.  
  811. <4>[    3.547895] ES8323 0-0010: ASoC: Failed to create Right ADC Mux debugfs file
  812.  
  813. <3>[    3.547906] ES8323 0-0010: asoc: failed to add kcontrol Left ADC Mux
  814.  
  815. <4>[    3.547915] ES8323 0-0010: ASoC: Failed to create Left ADC Mux debugfs file
  816.  
  817. <3>[    3.547926] ES8323 0-0010: asoc: failed to add kcontrol Differential Mux
  818.  
  819. <4>[    3.547935] ES8323 0-0010: ASoC: Failed to create Differential Mux debugfs file
  820.  
  821. <4>[    3.547946] ES8323 0-0010: ASoC: Failed to create Mic Bias debugfs file
  822.  
  823. <6>[    3.548630]
  824.  
  825. <6>[    3.548632] mmc_attach_sd..1218..  ===== Begin to identify card as SD-card. [mmc0]
  826.  
  827. <6>[    3.559329] asoc: ES8323 HiFi <-> rk29_i2s.0 mapping ok
  828.  
  829. <6>[    3.559626] ALSA device list:
  830.  
  831. <6>[    3.559633]   #0: RK29_ES8323
  832.  
  833. <6>[    3.559708] GACT probability NOT on
  834.  
  835. <6>[    3.559718] Mirror/redirect action on
  836.  
  837. <6>[    3.559724] u32 classifier
  838.  
  839. <6>[    3.559729]     Actions configured
  840.  
  841. <6>[    3.559735] Netfilter messages via NETLINK v0.30.
  842.  
  843. <6>[    3.559771] nf_conntrack version 0.5.0 (13970 buckets, 55880 max)
  844.  
  845. <6>[    3.560093] ctnetlink v0.93: registering with nfnetlink.
  846.  
  847. <6>[    3.560123] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  848.  
  849. <6>[    3.560130] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  850.  
  851. <6>[    3.560314] xt_time: kernel timezone is -0000
  852.  
  853. <6>[    3.560435] ip_tables: (C) 2000-2006 Netfilter Core Team
  854.  
  855. <6>[    3.560537] arp_tables: (C) 2002 David S. Miller
  856.  
  857. <6>[    3.560576] TCP cubic registered
  858.  
  859. <6>[    3.560934] NET: Registered protocol family 10
  860.  
  861. <6>[    3.561415] Mobile IPv6
  862.  
  863. <6>[    3.561439] ip6_tables: (C) 2000-2006 Netfilter Core Team
  864.  
  865. <6>[    3.561532] IPv6 over IPv4 tunneling driver
  866.  
  867. <6>[    3.562060] NET: Registered protocol family 17
  868.  
  869. <6>[    3.562085] NET: Registered protocol family 15
  870.  
  871. <5>[    3.562156] Bridge firewalling registered
  872.  
  873. <6>[    3.564406] Bluetooth: RFCOMM TTY layer initialized
  874.  
  875. <6>[    3.564420] Bluetooth: RFCOMM socket layer initialized
  876.  
  877. <6>[    3.564426] Bluetooth: RFCOMM ver 1.11
  878.  
  879. <6>[    3.564433] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  880.  
  881. <6>[    3.564441] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  882.  
  883. <6>[    3.564534] NET: Registered protocol family 35
  884.  
  885. <6>[    3.564719] [BT_RFKILL]: Enter rfkill_rk_init
  886.  
  887. <6>[    3.564823] [BT_RFKILL]: Request irq for bt wakeup host
  888.  
  889. <6>[    3.564841] [BT_RFKILL]: ** disable irq
  890.  
  891. <6>[    3.594338] [BT_RFKILL]: bt shut off power
  892.  
  893. <6>[    3.624347] [BT_RFKILL]: rk903_26M device registered.
  894.  
  895. <4>[    3.624540]
  896.  
  897. <4>[    3.624542] *****************sensor_mod_init..sp0838..
  898.  
  899. <4>[    3.624572]
  900.  
  901. <4>[    3.624573] *****************sensor_mod_init..sp0718..
  902.  
  903. <4>[    3.624600]
  904.  
  905. <4>[    3.624602] *****************sensor_mod_init..sp0718_mr71..
  906.  
  907. <4>[    3.624630]
  908.  
  909. <4>[    3.624632] *****************sensor_mod_init..sp0718_mr25..
  910.  
  911. <4>[    3.624668]
  912.  
  913. <4>[    3.624669] *****************sensor_mod_init..sp2518..
  914.  
  915. <4>[    3.624697]
  916.  
  917. <4>[    3.624699] *****************sensor_mod_init..sp2518_mr71..
  918.  
  919. <4>[    3.624753]
  920.  
  921. <4>[    3.624755] *****************sensor_mod_init..sp2518_mr25..
  922.  
  923. <4>[    3.624793]
  924.  
  925. <4>[    3.624795] *****************sensor_mod_init..BF3A20..
  926.  
  927. <4>[    3.624822]
  928.  
  929. <4>[    3.624824] *****************sensor_mod_init..BF3703..
  930.  
  931. <6>[    3.624901] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  932.  
  933. <4>[    3.625396] rk_sensor_io_init..back2_gc2035..powerdown pin(222) init failed
  934.  
  935. <4>[    3.625410] rk_sensor_io_init..back3_BF3A20..powerdown pin(222) init failed
  936.  
  937. <4>[    3.625423] rk_sensor_io_init..front2_gc0308..powerdown pin(207) init failed
  938.  
  939. <4>[    3.625434] rk_sensor_io_init..front3_BF3703..powerdown pin(207) init failed
  940.  
  941. <4>[    3.625444] rk_sensor_io_init..front4_hi704..powerdown pin(207) init failed
  942.  
  943. <3>[    3.625455]
  944.  
  945. <3>[    3.625457] rk_camera_probe Memory(start:0x8ec00000 size:0x800000) for IPP obtain
  946.  
  947. <4>[    3.625829] ft5x_ts_init
  948.  
  949. <6>[    3.625837] ========icn83xx_ts_init=========
  950.  
  951. <6>[    3.625883] sensor_init: Probe name sensors
  952.  
  953. <6>[    3.630021] tps65910-rtc tps65910-rtc: setting system clock to 2013-10-21 15:17:03 UTC (1382368623)
  954.  
  955. <6>[    3.630266] Freeing init memory: 1160K
  956.  
  957. <3>[    3.639668] init: /init.rc: 588: ignored duplicate definition of service 'drmservice'
  958.  
  959. <4>[    3.640395] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  960.  
  961. <6>[    3.671696] keychord: using input dev rk29-keypad for fevent
  962.  
  963. <3>[    3.671853] init: cannot open '/initlogo.rle'
  964.  
  965. <4>[    3.766883] gp_rknand_info = : 0xed0fe100
  966.  
  967. <4>[    3.767018] request IRQ_NANDC irq , ret=0.........
  968.  
  969. <4>[    3.767079] FlashCopyProgBuf1=0xc1496000
  970.  
  971. <4>[    3.767103] ATime: 40 ns AHB: 148 timming: 1081
  972.  
  973. <4>[    3.767113] No.1 FLASH INFO:ad de 94 d2 4
  974.  
  975. <4>[    3.768860] HynixGetChipDefaultValue
  976.  
  977. <4>[    3.768872] ATime: 32 ns AHB: 148 timming: 1061
  978.  
  979. <4>[    3.769023] ATime: 32 ns AHB: 148 timming: 1061
  980.  
  981. <4>[    3.769030] randomizer = 0 , EccBits = 18 pSpec->pReadRetrial = bf00be20
  982.  
  983. <6>[    3.784416] camera 33-0-back1_sp2518_mr71: RK Camera driver attached to camera0(back1_sp2518_mr71)
  984.  
  985. <3>[    3.784436] rk_camera_add_device..1007..
  986.  
  987. <6>[    3.864345] rk29_sdmmc_change_clk_div..1945..  newDiv=0, newCLK=49500Khz [sd_mmc]
  988.  
  989. <6>[    3.864410] mmc0: new high speed SDHC card at address 0002
  990.  
  991. <4>[    3.906754] FTL INFO:Version = 438,Date = 20130322
  992.  
  993. <4>[    3.906762] totalLogicBlkRaw  = 1906
  994.  
  995. <4>[    3.906778] gBootMedia = 0 gSdmmcFwPartOffset =0!
  996.  
  997. <4>[    3.906785] rknand_buffer.c version: 4.38 20121130!
  998.  
  999. <5>[    3.914364] 10 cmdlinepart partitions found on MTD device rk29xxnand
  1000.  
  1001. <5>[    3.914374] Creating 10 MTD partitions on "rk29xxnand":
  1002.  
  1003. <5>[    3.914384] 0x000000400000-0x000000800000 : "misc"
  1004.  
  1005. <5>[    3.915050] 0x000000800000-0x000001000000 : "kernel"
  1006.  
  1007. <5>[    3.924581] 0x000001000000-0x000002000000 : "boot"
  1008.  
  1009. <6>[    3.924837] mmcblk0: mmc0:0002 SD4GB 3.83 GiB
  1010.  
  1011. <6>[    3.926158]
  1012.  
  1013. <6>[    3.926160] msdos_partition..461... ==== Begin to parse sdcard-partition.  [mmc0]
  1014.  
  1015. <6>[    3.926171] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
  1016.  
  1017. <6>[    3.926180] msdos_partition..543... ==== partition-1, size=4017152KB  [mmc0]
  1018.  
  1019. <6>[    3.926188] msdos_partition..571... ==== main partition-1....[mmc0]
  1020.  
  1021. <6>[    3.926196]  mmcblk0: p1
  1022.  
  1023. <6>[    3.926466] mmc_rescan_try_freq..1721..  ===== Initialize SD-card successfully. [mmc0]
  1024.  
  1025. <6>[    3.926483]
  1026.  
  1027. <6>[    3.926485] drivers/mmc/core/core.c...1827..  ===== mmc_rescan Begin....[mmc1]
  1028.  
  1029. <4>[    3.926496]
  1030.  
  1031. <4>[    3.926498] =================
  1032.  
  1033. <4>[    3.926500] mmc_rescan..1834..  ====find no SDMMC host. [mmc1]
  1034.  
  1035. <5>[    3.984635] 0x000002000000-0x000003000000 : "recovery"
  1036.  
  1037. <5>[    3.985089] 0x000003000000-0x00001b000000 : "backup"
  1038.  
  1039. <5>[    3.985744] 0x00001b000000-0x000023000000 : "cache"
  1040.  
  1041. <5>[    3.986226] 0x000023000000-0x000063000000 : "userdata"
  1042.  
  1043. <5>[    3.987267] 0x000063000000-0x000063400000 : "kpanic"
  1044.  
  1045. <6>[    3.988503] apanic: Bound to mtd partition 'kpanic'
  1046.  
  1047. <6>[    3.988511] apanic: No panic data available
  1048.  
  1049. <5>[    3.988524] 0x000063400000-0x00007f400000 : "system"
  1050.  
  1051. <5>[    3.989201] 0x00007f400000-0x0001dc800000 : "user"
  1052.  
  1053. <4>[    3.992736] startBlk = 118  sysProtAddr = 117
  1054.  
  1055. <6>[    4.079761] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  1056.  
  1057. <6>[    4.274797] rk30_i2c rk30_i2c.3: Addr[0x30]  irq in STATE_IDLE, ipd = 0x33
  1058.  
  1059. <6>[    4.275157] camera 33-0-back1_sp2518_mr71: RK Camera driver detached from camera0(back1_sp2518_mr71)
  1060.  
  1061. <6>[    4.374642] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  1062.  
  1063. <6>[    4.444357] camera 33-0-back1_sp2518_mr71: Probe back1_sp2518_mr71 success
  1064.  
  1065. <4>[    4.444371] back camera registered
  1066.  
  1067. <4>[    4.444454] back2_gc2035: back camera already loaded.
  1068.  
  1069. <4>[    4.444468] camera: probe of 33-1-back2_gc2035 failed with error -1
  1070.  
  1071. <4>[    4.444514] back3_BF3A20: back camera already loaded.
  1072.  
  1073. <4>[    4.444523] camera: probe of 33-2-back3_BF3A20 failed with error -1
  1074.  
  1075. <6>[    4.474635] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  1076.  
  1077. <4>[    4.477034] UMP: UMP device driver  loaded
  1078.  
  1079. <6>[    4.604394] camera 33-3-front1_sp0718_mr71: RK Camera driver attached to camera3(front1_sp0718_mr71)
  1080.  
  1081. <3>[    4.604449] rk_camera_add_device..1007..
  1082.  
  1083. <6>[    4.835199] camera 33-3-front1_sp0718_mr71: RK Camera driver detached from camera3(front1_sp0718_mr71)
  1084.  
  1085. <6>[    5.004400] camera 33-3-front1_sp0718_mr71: Probe front1_sp0718_mr71 success
  1086.  
  1087. <4>[    5.004435] front camera registered
  1088.  
  1089. <4>[    5.004612] front2_gc0308: front camera already loaded.
  1090.  
  1091. <4>[    5.004644] camera: probe of 33-4-front2_gc0308 failed with error -1
  1092.  
  1093. <4>[    5.004770] front3_BF3703: front camera already loaded.
  1094.  
  1095. <4>[    5.004799] camera: probe of 33-5-front3_BF3703 failed with error -1
  1096.  
  1097. <4>[    5.004920] front4_hi704: front camera already loaded.
  1098.  
  1099. <4>[    5.004946] camera: probe of 33-6-front4_hi704 failed with error -1
  1100.  
  1101. <4>[    5.005244] Mali: init_mali_clock mali_clock c0b21940
  1102.  
  1103. <4>[    5.012153] Mali: Mali device driver loaded
  1104.  
  1105. <4>[    5.012657] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
  1106.  
  1107. <4>[    5.013983] ipp irq 47
  1108.  
  1109. <4>[    5.016494] IPP init, version rk30-ipp 1.001
  1110.  
  1111. <4>[    5.027644] ver_open
  1112.  
  1113. <4>[    5.027679] ver_close
  1114.  
  1115. <3>[    5.988681] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  1116.  
  1117. <3>[    5.992352] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
  1118.  
  1119. <3>[    6.001185] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  1120.  
  1121. <3>[    6.002242] init: cannot find '/system/bin/drmservice', disabling 'drmservice'
  1122.  
  1123. <3>[    6.002406] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
  1124.  
  1125. <3>[    6.002463] init: cannot find '/system/bin/akmd8975', disabling 'akmd'
  1126.  
  1127. <3>[    6.002501] init: cannot find '/system/bin/busybox', disabling 'preinstall'
  1128.  
  1129. <4>[    6.010909] vpu: power on
  1130.  
  1131. <6>[    6.010967] VPU_SERVICE: HW ID = 0x67312398
  1132.  
  1133. <6>[    6.014421] VPU_SERVICE: Compatible HW found at 0x10104400
  1134.  
  1135. <6>[    6.014437] VPU_SERVICE: HW ID = 0x48311220
  1136.  
  1137. <6>[    6.014443] VPU_SERVICE: Compatible HW found at 0x10104000
  1138.  
  1139. <4>[    6.014949] vpu: power off...done
  1140.  
  1141. <6>[    6.014975] VPU_SERVICE: init success
  1142.  
  1143. <6>[    6.075889] rk_serial rk_serial.0: baud:9600
  1144.  
  1145. <4>[    6.080182] serial.0 timeout:1000000
  1146.  
  1147. <6>[    6.084021] rk_serial rk_serial.0: baud:9600
  1148.  
  1149. <4>[    6.088315] serial.0 timeout:1000000
  1150.  
  1151. <3>[    6.092302] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  1152.  
  1153. <3>[    6.100341] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  1154.  
  1155. <3>[    6.110372] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  1156.  
  1157. <3>[    6.120394] init: property 'ro.product.usbfactory' doesn't exist while expanding '$ro.product.usbfactory'
  1158.  
  1159. <3>[    6.129975] init: cannot expand '$ro.product.usbfactory' while writing to '/sys/class/android_usb/android0/f_mass_storage/inquiry_string'
  1160.  
  1161. <3>[    6.143488] android_usb: already disabled
  1162.  
  1163. <6>[    6.150199] adb_open
  1164.  
  1165. <6>[    7.961534] camera 33-0-back1_sp2518_mr71: RK Camera driver attached to camera0(back1_sp2518_mr71)
  1166.  
  1167. <3>[    7.961568] sp2518_mr71 sensor_ioctl cmd(0x3) is unknown !
  1168.  
  1169. <3>[    7.961575] rk_camera_add_device..1007..
  1170.  
  1171. <6>[    7.961861] camera 33-0-back1_sp2518_mr71: RK Camera driver detached from camera0(back1_sp2518_mr71)
  1172.  
  1173. <6>[    8.064435] camera 33-3-front1_sp0718_mr71: RK Camera driver attached to camera3(front1_sp0718_mr71)
  1174.  
  1175. <3>[    8.064467] sp0718_mr71 sensor_ioctl cmd(0x3) is unknown !
  1176.  
  1177. <3>[    8.064475] rk_camera_add_device..1007..
  1178.  
  1179. <6>[    8.064823] camera 33-3-front1_sp0718_mr71: RK Camera driver detached from camera3(front1_sp0718_mr71)
  1180.  
  1181. <6>[    8.234456] EXT4-fs (mtdblock8): re-mounted. Opts: barrier=1,data=ordered,noauto_da_alloc
  1182.  
  1183. <6>[    8.594004] EXT4-fs (mtdblock8): re-mounted. Opts: noauto_da_alloc,barrier=0
  1184.  
  1185. <6>[    8.702611] EXT4-fs (mtdblock6): re-mounted. Opts: noauto_da_alloc,barrier=0
  1186.  
  1187. <6>[    8.714296] EXT4-fs (mtdblock5): re-mounted. Opts: noauto_da_alloc,barrier=0
  1188.  
  1189. <4>[    8.870759] Loading Genio HUB access mod
  1190.  
  1191. <4>[    8.870776] HUBaccess mod addres check failed [18 20 84 e5]
  1192.  
  1193. <6>[    9.604366] DWC_OTG: dwc_otg_hcd_connect_detect schedule delaywork
  1194.  
  1195. <6>[    9.611649] usbcore: registered new interface driver dm9601
  1196.  
  1197. <6>[    9.629866] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  1198.  
  1199. <6>[    9.654469] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  1200.  
  1201. <6>[    9.655031] usbcore: registered new interface driver rtl8150
  1202.  
  1203. <6>[    9.684433] DWC_OTG: dwc_otg_hcd_enable, disable host controller
  1204.  
  1205. <6>[    9.684466] DWC_OTG: PortPower off
  1206.  
  1207. <6>[    9.698509] usbcore: registered new interface driver xpad
  1208.  
  1209. <6>[    9.845293] NTFS driver 2.1.30 [Flags: R/W MODULE].
  1210.  
  1211. <6>[    9.884053] USB Serial support registered for cp210x
  1212.  
  1213. <6>[    9.886958] usbcore: registered new interface driver cp210x
  1214.  
  1215. <6>[    9.886969] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
  1216.  
  1217. <6>[    9.909657] USB Serial support registered for pl2303
  1218.  
  1219. <6>[    9.909726] usbcore: registered new interface driver pl2303
  1220.  
  1221. <6>[    9.909731] pl2303: Prolific PL2303 USB to serial adaptor driver
  1222.  
  1223. <6>[    9.939192] USB Serial support registered for FTDI USB Serial Device
  1224.  
  1225. <6>[    9.945006] usbcore: registered new interface driver ftdi_sio
  1226.  
  1227. <6>[    9.945017] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  1228.  
  1229. <6>[    9.996736] usbcore: registered new interface driver cdc_acm
  1230.  
  1231. <6>[    9.996760] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1232.  
  1233. <4>[   10.014382] delayed
  1234.  
  1235. <6>[   12.722807] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  1236.  
  1237. <4>[   12.809409] [rknand_sys_storage_ioctl:84] rknand_sys_storage_ioctl in
  1238.  
  1239. <4>[   12.809431] [rknand_sys_storage_ioctl:258] RKNAND_GET_VENDOR_SECTOR
  1240.  
  1241. <4>[   12.809444] [rknand_sys_storage_ioctl:300] return ret = 0
  1242.  
  1243. <4>[   12.809468] [rknand_sys_storage_ioctl:84] rknand_sys_storage_ioctl in
  1244.  
  1245. <4>[   12.809479] [rknand_sys_storage_ioctl:258] RKNAND_GET_VENDOR_SECTOR
  1246.  
  1247. <4>[   12.809490] [rknand_sys_storage_ioctl:300] return ret = 0
  1248.  
  1249. <4>[   12.809500] init sys sector ok
  1250.  
  1251. <4>[   12.809508] acc offset 0 0 0
  1252.  
  1253. <6>[   16.091385] request_suspend_state: wakeup (3->0) at 16087049254 (2013-10-21 15:17:15.949389295 UTC)
  1254.  
  1255. <4>[   16.634793] Current WiFi chip is RTL8188EU.
  1256.  
  1257. <4>[   16.720096] =======================================================
  1258.  
  1259. <4>[   16.726394] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
  1260.  
  1261. <4>[   16.726400] =======================================================
  1262.  
  1263. <4>[   16.726405] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 1.02) init.
  1264.  
  1265. <4>[   16.726411] wifi_usb_init
  1266.  
  1267. <4>[   16.726414] wifi_activate_usb
  1268.  
  1269. <4>[   16.726429] Request GPIO for WIFI POWER error!
  1270.  
  1271. <6>[   16.811981] acc_open
  1272.  
  1273. <6>[   16.812005] acc_release
  1274.  
  1275. <6>[   17.404383] DWC_OTG: ********vbus detect*********************************************
  1276.  
  1277. <6>[   17.604368] DWC_OTG: dwc_otg_hcd_connect_detect schedule delaywork
  1278.  
  1279. <6>[   17.618614] DWC_OTG: ********soft connect!!!*****************************************
  1280.  
  1281. <6>[   17.624656] DWC_OTG: USB SUSPEND
  1282.  
  1283. <6>[   17.684494] DWC_OTG: dwc_otg_hcd_enable, enable host controller
  1284.  
  1285. <6>[   17.695504] DWC_OTG: Init: Port Power? op_state=1
  1286.  
  1287. <6>[   17.695518] DWC_OTG: Init: Power Port (0)
  1288.  
  1289. <6>[   17.735107] DWC_OTG: USB RESET
  1290.  
  1291. <6>[   17.844682] usbcore: registered new interface driver rtl8188eu
  1292.  
  1293. <6>[   17.912050] android_work: sent uevent USB_STATE=CONNECTED
  1294.  
  1295. <6>[   17.915515] DWC_OTG: USB RESET
  1296.  
  1297. <6>[   18.120024] android_usb gadget: high speed config #1: android
  1298.  
  1299. <6>[   18.120165] android_work: sent uevent USB_STATE=CONFIGURED
  1300.  
  1301. <6>[   18.144549] usb 2-1: new high speed USB device number 2 using usb20_host
  1302.  
  1303. <6>[   18.365909] usb 2-1: New USB device found, idVendor=0bda, idProduct=8179
  1304.  
  1305. <6>[   18.365920] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1306.  
  1307. <6>[   18.365938] usb 2-1: Product: 802.11n WLAN NIC
  1308.  
  1309. <6>[   18.365947] usb 2-1: Manufacturer: Realtek
  1310.  
  1311.  
  1312. <4>[   18.367016] CHIP TYPE: RTL8188EU
  1313.  
  1314. <3>[   22.807418] init: cannot find '/system/bin/busybox', disabling 'postinstall'
  1315.  
  1316. <3>[   23.255240] init: sys_prop: permission denied uid:1002  name:persist.service.bdroid.bdaddr
  1317.  
  1318. <6>[   23.464941] [BT_RFKILL]: bt shut off power
  1319.  
  1320. <3>[   23.836948] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
  1321.  
  1322. <6>[   24.094387] [BT_RFKILL]: bt turn on power
  1323.  
  1324. <6>[   24.599940] rk_serial rk_serial.0: baud:9600
  1325.  
  1326. <4>[   24.604225] serial.0 timeout:1000000
  1327.  
  1328. <6>[   24.607861] rk_serial rk_serial.0: baud:9600
  1329.  
  1330. <4>[   24.612172] serial.0 timeout:1000000
  1331.  
  1332. <6>[   24.615221] rk_serial rk_serial.0: baud:115200
  1333.  
  1334. <4>[   24.615232] serial.0 timeout:1000000
  1335.  
  1336. <6>[   27.241461] EXT4-fs (mtdblock8): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc
  1337.  
  1338. <6>[   27.331324] EXT4-fs (mtdblock8): re-mounted. Opts: noauto_da_alloc,barrier=0
  1339.  
  1340. <6>[   27.385904] EXT4-fs (mtdblock6): re-mounted. Opts: noauto_da_alloc,barrier=0
  1341.  
  1342. <6>[   27.410362] EXT4-fs (mtdblock5): re-mounted. Opts: noauto_da_alloc,barrier=0
  1343.  
  1344. <3>[   31.176332] init: untracked pid 1315 exited
  1345.  
  1346. <3>[   31.241488] init: untracked pid 1327 exited
  1347.  
  1348. <3>[   31.332654] init: untracked pid 1334 exited
  1349.  
  1350. <4>[   31.386156] rknand_buffer_thread write data begin 259e00 0
  1351.  
  1352. <3>[   31.402123] init: untracked pid 1377 exited
  1353.  
  1354. <3>[   31.479213] init: untracked pid 1363 exited
  1355.  
  1356. <3>[   31.557046] init: untracked pid 1352 exited
  1357.  
  1358. <3>[   31.620977] init: untracked pid 1385 exited
  1359.  
  1360. <3>[   31.709505] init: untracked pid 1434 exited
  1361.  
  1362. <3>[   31.787214] init: untracked pid 1442 exited
  1363.  
  1364. <3>[   31.864784] init: untracked pid 1466 exited
  1365.  
  1366. <3>[   31.943361] init: untracked pid 1476 exited
  1367.  
  1368. <3>[   32.049233] init: untracked pid 1491 exited
  1369.  
  1370. <3>[   32.105633] init: untracked pid 1504 exited
  1371.  
  1372. <3>[   32.639728] init: untracked pid 1524 exited
  1373.  
  1374. <3>[   32.686365] init: untracked pid 1539 exited
  1375.  
  1376. <3>[   33.910040] init: untracked pid 1726 exited
  1377.  
  1378. <6>[   34.000568] Enter::rk29_hw_params----47
  1379.  
  1380. <6>[   34.002325] Enter:rk29_hw_params, 99, rate=44100
  1381.  
  1382. <6>[   34.002337] Enter:rk29_hw_params, 107, LRCK=64
  1383.  
  1384. <6>[   40.955024] Enter::rk29_hw_params----47
  1385.  
  1386. <6>[   40.956788] Enter:rk29_hw_params, 99, rate=44100
  1387.  
  1388. <6>[   40.956844] Enter:rk29_hw_params, 107, LRCK=64
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top