SHARE
TWEET

Untitled

a guest May 1st, 2012 28 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. lsusb:
  3.  
  4. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  5. Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
  6. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
  7. Bus 001 Device 004: ID 050d:815c Belkin Components F5D8053 N Wireless USB Adapter v3000 [Ralink RT2870]
  8.  
  9. lsmod:
  10.  
  11. Module                  Size  Used by
  12.  
  13. dmesg:
  14.  
  15. [    0.000000] Initializing cgroup subsys cpu
  16. [    0.000000] Linux version 3.1.10 (joshua@Livingroom) (gcc version 4.7.0 (GCC) ) #1 Mon Apr 23 18:53:44 CDT 2012
  17. [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  18. [    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  19. [    0.000000] Machine: BCM2708
  20. [    0.000000] Memory policy: ECC disabled, Data cache writeback
  21. [    0.000000] On node 0 totalpages: 32768
  22. [    0.000000] free_area_init_node: node 0, pgdat c07bfadc, node_mem_map c0811000
  23. [    0.000000]   Normal zone: 256 pages used for memmap
  24. [    0.000000]   Normal zone: 0 pages reserved
  25. [    0.000000]   Normal zone: 32512 pages, LIFO batch:7
  26. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  27. [    0.000000] pcpu-alloc: [0] 0
  28. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
  29. [    0.000000] Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0x2 bcm2708.serial=0xb8adf4d3 smsc95xx.macaddr=B8:27:EB:AD:F4:D3 sudo echo "dwc_otg.lpm_enable=0 root=/dev/ram0 rdinit=/init boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet debugging" > /media/System/cm
  30. [    0.000000] Booting kernel: `0 root=/dev/ram0 rdinit=/init boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet debugging' invalid for parameter `dwc_otg.lpm_enable'
  31. [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  32. [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  33. [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  34. [    0.000000] Memory: 128MB = 128MB total
  35. [    0.000000] Memory: 121640k/121640k available, 9432k reserved, 0K highmem
  36. [    0.000000] Virtual kernel memory layout:
  37. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  38. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  39. [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
  40. [    0.000000]     vmalloc : 0xc8800000 - 0xd8000000   ( 248 MB)
  41. [    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
  42. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  43. [    0.000000]       .text : 0xc0008000 - 0xc04b9000   (4804 kB)
  44. [    0.000000]       .init : 0xc04b9000 - 0xc0795000   (2928 kB)
  45. [    0.000000]       .data : 0xc0796000 - 0xc07c0160   ( 169 kB)
  46. [    0.000000]        .bss : 0xc07c0184 - 0xc0810b88   ( 323 kB)
  47. [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  48. [    0.000000] NR_IRQS:85
  49. [    0.000000] timer_set_mode: unhandled mode:1
  50. [    0.000000] timer_set_mode: unhandled mode:3
  51. [    0.000000] Console: colour dummy device 80x30
  52. [    0.000000] console [tty0] enabled
  53. [    5.800068] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
  54. [    5.859501] pid_max: default: 32768 minimum: 301
  55. [    5.859697] Mount-cache hash table entries: 512
  56. [    5.860207] CPU: Testing write buffer coherency: ok
  57. [    5.861362] devtmpfs: initialized
  58. [    5.862612] NET: Registered protocol family 16
  59. [    5.868264] vc-mem: mm_vc_mem_phys_addr = 0x00000000
  60. [    5.868323] vc-mem: mm_vc_mem_size      = 0x10000000 (256 MiB)
  61. [    5.869436] mailbox: Broadcom VideoCore Mailbox driver
  62. [    5.869620] bcm2708_vcio: mailbox at f200b880
  63. [    5.870153] bcm_power: Broadcom power driver
  64. [    5.870199] bcm_power_open() -> 0
  65. [    5.870222] bcm_power_request(0, 8)
  66. [    6.370894] bcm_mailbox_read -> 00000080, 0
  67. [    6.370930] bcm_power_request -> 0
  68. [    6.370954] Serial: AMBA PL011 UART driver
  69. [    6.371110] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  70. [    6.431315] bio: create slab <bio-0> at 0
  71. [    6.433477] SCSI subsystem initialized
  72. [    6.434131] usbcore: registered new interface driver usbfs
  73. [    6.434708] usbcore: registered new interface driver hub
  74. [    6.435154] usbcore: registered new device driver usb
  75. [    6.437448] Switching to clocksource stc
  76. [    6.437673] FS-Cache: Loaded
  77. [    6.438195] CacheFiles: Loaded
  78. [    6.440092] Switched to NOHz mode on CPU #0
  79. [    6.474410] NET: Registered protocol family 2
  80. [    6.474664] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  81. [    6.475076] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  82. [    6.475308] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  83. [    6.475431] TCP: Hash tables configured (established 4096 bind 4096)
  84. [    6.475463] TCP reno registered
  85. [    6.475491] UDP hash table entries: 256 (order: 0, 4096 bytes)
  86. [    6.475548] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  87. [    6.475888] NET: Registered protocol family 1
  88. [    6.476282] RPC: Registered named UNIX socket transport module.
  89. [    6.476332] RPC: Registered udp transport module.
  90. [    6.476360] RPC: Registered tcp transport module.
  91. [    6.476385] RPC: Registered tcp NFSv4.1 backchannel transport module.
  92. [    6.496068] bcm2708_dma: DMA manager at c8808000
  93. [    6.496459] bcm2708_gpio: bcm2708_gpio_probe c079be98
  94. [    6.497130] vc-mem: Videocore memory driver
  95. [    6.531419] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  96. [    6.532477] FS-Cache: Netfs 'nfs' registered for caching
  97. [    6.534108] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  98. [    6.536569] fuse init (API version 7.17)
  99. [    6.539755] JFS: nTxBlock = 950, nTxLock = 7602
  100. [    6.540765] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  101. [    6.545220] msgmni has been set to 237
  102. [    6.548373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  103. [    6.548451] io scheduler noop registered
  104. [    6.548477] io scheduler deadline registered
  105. [    6.548730] io scheduler cfq registered (default)
  106. [    6.549275] BCM2708FB: registering framebuffer (656, 416)
  107. [    6.550328] bcm2708_fb_set_par info(c78b6c00) 656x416 (656x416), 0, 16
  108. [    6.567639] BCM2708FB: start = c8900000,49384000 width=656, height=416, bpp=16, pitch=1312 size=545792 success=0
  109. [    6.571472] Console: switching to colour frame buffer device 82x26
  110. [    6.585939] BCM2708FB: register framebuffer (0)
  111. [    6.606527] brd: module loaded
  112. [    6.618757] loop: module loaded
  113. [    6.621922] nbd: registered device at major 43
  114. [    6.644516] vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
  115. [    6.648306] vcos: [1]: vchiq_init_state: called
  116. [    6.652136] vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
  117. [    6.655252] Loading iSCSI transport class v2.0-870.
  118. [    6.660419] iscsi: registered transport (tcp)
  119. [    6.664563] tun: Universal TUN/TAP device driver, 1.6
  120. [    6.667388] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  121. [    6.671426] usbcore: registered new interface driver smsc95xx
  122. [    6.674337] cdc_ncm: 04-Aug-2011
  123. [    6.677746] usbcore: registered new interface driver cdc_ncm
  124. [    6.680560] dwc_otg: version 2.90b 6-MAY-2010 (platform bus)
  125. [    6.683641] Core Release: 2.80a
  126. [    6.686364] Setting default values for core params
  127. [    6.689116] Finished setting default values for core params
  128. [    6.692039] c88c0008 -> 1
  129. [    6.894521] Using Buffer DMA mode
  130. [    6.897251] Periodic Transfer Interrupt Enhancement - disabled
  131. [    6.900053] Multiprocessor Interrupt Enhancement - disabled
  132. [    6.902812] Dedicated Tx FIFOs mode
  133. [    6.905718] dwc_otg bcm2708_usb: DWC OTG Controller
  134. [    6.908553] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  135. [    6.911305] dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
  136. [    6.913964] Init: Port Power? op_state=1
  137. [    6.916540] Init: Power Port (0)
  138. [    6.919304] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  139. [    6.922004] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  140. [    6.924635] usb usb1: Product: DWC OTG Controller
  141. [    6.927261] usb usb1: Manufacturer: Linux 3.1.10 dwc_otg_hcd
  142. [    6.929979] usb usb1: SerialNumber: bcm2708_usb
  143. [    6.934173] hub 1-0:1.0: USB hub found
  144. [    6.936808] hub 1-0:1.0: 1 port detected
  145. [    6.940679] Module dwc_common_port init
  146. [    6.940807] Initializing USB Mass Storage driver...
  147. [    6.943961] usbcore: registered new interface driver usb-storage
  148. [    6.946541] USB Mass Storage support registered.
  149. [    6.949849] usbcore: registered new interface driver libusual
  150. [    6.953313] usbcore: registered new interface driver usbserial
  151. [    6.955817] usbserial: USB Serial Driver core
  152. [    6.959124] mousedev: PS/2 mouse device common for all mice
  153. [    6.962394] lirc_dev: IR Remote Control driver registered, major 251
  154. [    6.964948] IR NEC protocol handler initialized
  155. [    6.967438] IR RC5(x) protocol handler initialized
  156. [    6.970025] IR RC6 protocol handler initialized
  157. [    6.972496] IR JVC protocol handler initialized
  158. [    6.974880] IR Sony protocol handler initialized
  159. [    6.977223] IR RC5 (streamzap) protocol handler initialized
  160. [    6.979655] IR MCE Keyboard/mouse protocol handler initialized
  161. [    6.982064] cpuidle: using governor ladder
  162. [    6.984441] cpuidle: using governor menu
  163. [    6.987248] sdhci: Secure Digital Host Controller Interface driver
  164. [    6.989742] sdhci: Copyright(c) Pierre Ossman
  165. [    6.992293] bcm_power_open() -> 1
  166. [    6.995319] Registered led device: mmc0::
  167. [    6.995703] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  168. [    7.000577] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  169. [    7.003715] sdhci-pltfm: SDHCI platform and OF driver helper
  170. [    7.006848] Registered led device: led0
  171. [    7.016261] usbcore: registered new interface driver usbhid
  172. [    7.018967] usbhid: USB HID core driver
  173. [    7.022040] TCP cubic registered
  174. [    7.024568] Initializing XFRM netlink socket
  175. [    7.027093] NET: Registered protocol family 17
  176. [    7.029707] Registering the dns_resolver key type
  177. [    7.032329] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  178. [    7.059733] Freeing init memory: 2928K
  179. [    7.208639] mmc0: problem reading SD Status register.
  180. [    7.214522] mmc0: error -84 whilst initialising SD card
  181. [    7.317577] usb 1-1: new high speed USB device number 2 using dwc_otg
  182. [    7.390864] mmc0: problem reading SD Status register.
  183. [    7.393818] mmc0: error -110 whilst initialising SD card
  184. [    7.516675] mmc0: problem reading SD Status register.
  185. [    7.518000] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  186. [    7.520070] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  187. [    7.520341] mmc0: error -110 whilst initialising SD card
  188. [    7.523850] hub 1-1:1.0: USB hub found
  189. [    7.524116] hub 1-1:1.0: 3 ports detected
  190. [    7.680737] mmc0: problem reading SD Status register.
  191. [    7.685407] mmc0: error -110 whilst initialising SD card
  192. [    7.797728] usb 1-1.1: new high speed USB device number 3 using dwc_otg
  193. [    7.897998] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  194. [    7.898031] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  195. [    7.901674] smsc95xx v1.0.4
  196. [    7.962402] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ad:f4:d3
  197. [    8.057727] usb 1-1.3: new high speed USB device number 4 using dwc_otg
  198. [    8.177595] usb 1-1.3: New USB device found, idVendor=050d, idProduct=815c
  199. [    8.177625] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  200. [    8.177651] usb 1-1.3: Product: F5D8053 N Wireless USB Adapter
  201. [    8.177667] usb 1-1.3: Manufacturer: Belkin
  202. [    8.809056] mmc0: problem reading SD Status register.
  203. [    8.821166] mmc0: new SDHC card at address e624
  204. [    8.821998] mmcblk0: mmc0:e624 SD16G 14.8 GiB
  205. [    8.827387]  mmcblk0: p1 p2
  206. [    9.238797] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  207. [    9.248686] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  208. [    9.494124] EXT4-fs (mmcblk0p2): recovery complete
  209. [    9.497124] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  210. >[   13.610287] udevd[747]: starting version 182
  211. [   16.500005] Console: switching to colour dummy device 80x30
  212. [   16.597878] bcm2708_fb_check_var info(c78b6c00) 656x416 (656x416), 545792, 16
  213. [   16.597899] bcm2708_fb_check_var var(c72f9e30) 1x1 (656x416), 16, 272896
  214. [   16.597932] bcm2708_fb_set_par info(c78b6c00) 1x1 (656x416), 545792, 16
  215. [   16.617734] BCM2708FB: start = c8a00000,49384000 width=1, height=1, bpp=16, pitch=1312 size=545792 success=0
  216. [   34.686355] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top