Guest User

Untitled

a guest
Jan 10th, 2017
278
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. INFO: Configuring SPC Controller
  2. NOTICE: BL3-1: v1.0(debug):9578c83
  3. NOTICE: BL3-1: Built : 09:46:40, Sep 7 2016
  4. NOTICE: BL3-1 commit: 9578c8321468250ff68604cf84c19e662a9080ec
  5.  
  6. INFO: BL3-1: Initializing runtime services
  7. ERROR: Error initializing runtime service tspd_fast
  8. INFO: BL3-1: Preparing for EL3 exit to normal world
  9. INFO: BL3-1: Next image address = 0x4a000000
  10. INFO: BL3-1: Next image spsr = 0x1d3
  11. [SCP] :sunxi-arisc driver begin startup 2
  12. [SCP] :arisc_para size:240
  13. [SCP] :arisc version: [v0.1.94]
  14. [SCP] :sunxi-arisc driver v1.10 is starting
  15. no battery, limit to dc
  16. no uart input
  17. DRAM:
  18. In: Out: Err: update dtb dram start
  19. update dtb dram end
  20. ()
  21. [ 5.594]inter uboot shell
  22.  
  23. read partition: boot or recovery
  24. INFO: BL3-1: Next image address = 0x41080000
  25. INFO: BL3-1: Next image spsr = 0x3c5
  26. [ 0.000000] Initializing cgroup subsys cpuset
  27. [ 0.000000] Initializing cgroup subsys cpu
  28. [ 0.000000] Initializing cgroup subsys cpuacct
  29. [ 0.000000] Linux version 3.10.65 (justin@justin-OptiPlex-3010) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #1 SMP PREEMPT Tue Sep 13 18:53:16 CST 2016
  30. [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
  31. [ 0.000000] Machine: sun50iw1p1
  32. [ 0.000000] bootconsole [earlycon0] enabled
  33. [ 0.000000] cma: CMA: reserved 256 MiB at b0000000
  34. [ 0.000000] On node 0 totalpages: 520192
  35. [ 0.000000] DMA zone: 7112 pages used for memmap
  36. [ 0.000000] DMA zone: 0 pages reserved
  37. [ 0.000000] DMA zone: 520192 pages, LIFO batch:31
  38. [ 0.000000] script_init enter!
  39. [ 0.000000] script_init exit!
  40. [ 0.000000] psci: probing for conduit method from DT.
  41. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  42. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  43. [ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc06ef7b000 s20288 r8192 d20672 u49152
  44. [ 0.000000] pcpu-alloc: s20288 r8192 d20672 u49152 alloc=12*4096
  45. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  46. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513080
  47. [ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x01c28000 initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p7 init=/init partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:verity_block@mmcblk0p8:misc@mmcblk0p9:recovery@mmcblk0p10:cache@mmcblk0p11:metadata@mmcblk0p12:private@mmcblk0p13:frp@mmcblk0p14:empty@mmcblk0p15:alog@mmcblk0p16:media_data@mmcblk0p17:UDISK@mmcblk0p1 cma=256M androidboot.selinux=enforcing androidboot.serialno=0410503444104420048e androidboot.hardware=sun50iw1p1 boot_type=2 androidboot.verifiedbootstate=<NULL> androidboot.sunxi_rotpk=<NULL>
  48. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  49. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  50. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  51. [ 0.000000] Memory: 2032MB = 2032MB total
  52. [ 0.000000] Memory: 1767024k/1767024k available, 313744k reserved
  53. [ 0.000000] Virtual kernel memory layout:
  54. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
  55. [ 0.000000] vmemmap : 0xffffffbc00e38000 - 0xffffffbc02a00000 ( 27 MB)
  56. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  57. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc07f000000 ( 2032 MB)
  58. [ 0.000000] .init : 0xffffffc000a1a000 - 0xffffffc000a9ff40 ( 536 kB)
  59. [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000a197b4 ( 9830 kB)
  60. [ 0.000000] .data : 0xffffffc000aa0000 - 0xffffffc000b5ab98 ( 747 kB)
  61. [ 0.000000] Preemptible hierarchical RCU implementation.
  62. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  63. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
  64. [ 0.000000] Console: colour dummy device 80x25
  65. [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  66. [ 0.012455] pid_max: default: 32768 minimum: 301
  67. [ 0.017404] Security Framework initialized
  68. [ 0.020018] SELinux: Initializing.
  69. [ 0.023556] SELinux: Starting in permissive mode
  70. [ 0.028287] Mount-cache hash table entries: 256
  71. [ 0.031861] Initializing cgroup subsys debug
  72. [ 0.034179] Initializing cgroup subsys freezer
  73. [ 0.038703] ftrace: allocating 25652 entries in 101 pages
  74. [ 0.060788] CPU0: update cpu_power 1968128
  75. [ 0.060823] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  76. [ 0.068891] virtual base = 0xffffff800000a000.
  77. [ 0.070023] gicd_base = 0xffffff800000c000.
  78. [ 0.074162] gicc_base = 0xffffff800000e000.
  79. [ 0.010000] CPU1: Booted secondary processor
  80. [ 0.010000] CPU1: update cpu_power 1968128
  81. [ 0.010000] CPU2: Booted secondary processor
  82. [ 0.010000] CPU2: update cpu_power 1968128
  83. [ 0.010000] CPU3: Booted secondary processor
  84. [ 0.010000] CPU3: update cpu_power 1968128
  85. [ 0.081337] Brought up 4 CPUs
  86. [ 0.090010] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  87. [ 0.096925] devtmpfs: initialized
  88. [ 0.126265] atomic64 test passed
  89. [ 0.126265] pinctrl core: initialized pinctrl subsystem
  90. [ 0.137577] NET: Registered protocol family 16
  91. [ 0.140260] script_sysfs_init success
  92. [ 0.141867] dump_class_init,806, success
  93. [ 0.141867] vdso: 2 pages (1 code, 1 data) at base ffffffc000aa5000
  94. [ 0.150032] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  95. [ 0.157898] software IO TLB [mem 0xad000000-0xad400000] (4MB) mapped at [ffffffc06c000000-ffffffc06c3fffff]
  96. [ 0.160743] DMA: preallocated 256 KiB pool for atomic allocations
  97. [ 0.165671] axp81x_board_init: axp regl_devs num = 23
  98. [ 0.170179] pll_audio-set_default_rate=24576000 success!
  99. [ 0.175040] pll_video0-set_default_rate=297000000 success!
  100. [ 0.180109] pll_video1-set_default_rate=297000000 success!
  101. [ 0.185467] pll_de-set_default_rate=297000000 success!
  102. [ 0.190322] ahb1-set_default_rate=200000000 success!
  103. [ 0.195744] de-set_default_source=pll_de success!
  104. [ 0.199464] de-set_default_rate=297000000 success!
  105. [ 0.200063] tcon0-set_default_source=pll_mipi success!
  106. [ 0.205065] tcon1-set_default_source=pll_video0 success!
  107. [ 0.210323] hdmi-set_default_source=pll_video0 success!
  108. [ 0.217156] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  109. [ 0.220335] [sun50iw1p1_pinctrl_probe][837]
  110. [ 0.226154] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  111. [ 0.230530] sunxi hwspinlock vbase:0xffffff800005c000
  112. [ 0.250347] sunxi_chipid_probe,190: soc bin:0
  113. [ 0.310364] bio: create slab <bio-0> at 0
  114. [ 0.311014] pwm module init!
  115. [ 0.311186] SCSI subsystem initialized
  116. [ 0.320043] usbcore: registered new interface driver usbfs
  117. [ 0.323416] usbcore: registered new interface driver hub
  118. [ 0.325090] usbcore: registered new device driver usb
  119. [ 0.330674] Linux video capture interface: v2.00
  120. [ 0.332786] [ARISC] :sunxi-arisc driver v1.10
  121. [ 0.350474] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
  122. [ 0.360126] Advanced Linux Sound Architecture Driver Initialized.
  123. [ 0.365634] Bluetooth: Core ver 2.16
  124. [ 0.365634] NET: Registered protocol family 31
  125. [ 0.370014] Bluetooth: HCI device and connection manager initialized
  126. [ 0.376241] Bluetooth: HCI socket layer initialized
  127. [ 0.380036] Bluetooth: L2CAP socket layer initialized
  128. [ 0.385013] Bluetooth: SCO socket layer initialized
  129. [ 0.390650] cfg80211: Calling CRDA to update world regulatory domain
  130. [ 0.395665] [pm]aw_pm_init!
  131. [ 0.395665] rtc physical base = 0x0000000001f00000 .
  132. [ 0.400050] np name = /soc@01c00000/rtc@01f00000.
  133. [ 0.404686] base = ffffff800006e100, len = 4.
  134. [ 0.408949] pmu name: pmu0 .
  135. [ 0.410046] pmu0_enable = 0x1.
  136. [ 0.413068] pmux_id = 0x6.
  137. [ 0.415799] pmux_twi_id = 0x1.
  138. [ 0.418867] pmux_twi_addr = 0x34.
  139. [ 0.420006] pmu name: pmu1 .
  140. [ 0.422862] Warning: can not find np for pmu1.
  141. [ 0.427487] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
  142. [ 0.430157] after inited: sys_mask config = 0x4a55.
  143. [ 0.434879] Warning: can not find np for dynamic_standby_para.
  144. [ 0.440144] [pm]valid
  145. [ 0.442214] [pm]valid
  146. [ 0.444432] Notice: sun9i&sun8iw5&sun50i not need support normal standby, change to super standby.
  147. [ 0.450383] Switching to clocksource arch_sys_counter
  148. [ 0.492492] FS-Cache: Loaded
  149. [ 0.493108] CacheFiles: Loaded
  150. [ 0.519801] NET: Registered protocol family 2
  151. [ 0.521322] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
  152. [ 0.525917] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  153. [ 0.532639] TCP: Hash tables configured (established 16384 bind 16384)
  154. [ 0.539761] TCP: reno registered
  155. [ 0.542042] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  156. [ 0.547945] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  157. [ 0.555205] NET: Registered protocol family 1
  158. [ 0.559627] Unpacking initramfs...
  159. [ 0.819601] Freeing initrd memory: 4892K (ffffffc001000000 - ffffffc0014c7000)
  160. [ 0.823406] lock super standby defaultly!
  161. [ 0.825300] lookup_scene_lock_name: new scene lock super_standby
  162. [ 0.831331] scene_lock_init name=super_standby
  163. [ 0.835658] scene_lock: super_standby, type 5, count 1
  164. [ 0.842172] audit: initializing netlink socket (disabled)
  165. [ 0.846215] type=2000 audit(0.840:1): initialized
  166. [ 0.855699] NTFS driver 2.1.30 [Flags: R/W].
  167. [ 0.855962] fuse init (API version 7.22)
  168. [ 0.860258] msgmni has been set to 3972
  169. [ 0.862917] SELinux: Registering netfilter hooks
  170. [ 0.868297]
  171. [ 0.868297] TEE Core Framework initialization (ver 1:0.1)
  172. [ 0.874457] TEE armv7 Driver initialization
  173. [ 0.879313] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  174. [ 0.885151] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  175. [ 0.891638] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=60)
  176. [ 0.899521] NET: Registered protocol family 38
  177. [ 0.902797] io scheduler noop registered
  178. [ 0.906558] io scheduler deadline registered
  179. [ 0.911002] io scheduler cfq registered (default)
  180. [ 0.917609] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  181. [ 0.921560] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n
  182. [ 0.929379] console [ttyS0] enabled, bootconsole disabled
  183. [ 0.929379] console [ttyS0] enabled, bootconsole disabled
  184. [ 0.941864] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  185. [ 0.953924] misc dump reg init
  186. [ 0.965122] loop: module loaded
  187. [ 0.968907] sunxi-bt bt.29: bt_power_name (vcc-wifi)
  188. [ 0.974504] sunxi-bt bt.29: io_regulator_name (vcc-wifi-io)
  189. [ 0.980738] sunxi-bt bt.29: bt_rst gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0
  190. [ 0.989779] sunxi-bt bt.29: block state already is 1
  191. [ 0.995768] sunxi-wlan wlan.28: wlan_busnum (1)
  192. [ 1.000820] sunxi-wlan wlan.28: wlan_power_name (vcc-wifi)
  193. [ 1.006815] sunxi-wlan wlan.28: io_regulator_name (vcc-wifi-io)
  194. [ 1.013514] sunxi-wlan wlan.28: wlan_regon gpio=354 mul-sel=1 pull=-1 drv_level=-1 data=0
  195. [ 1.023019] sunxi-wlan wlan.28: wlan_hostwake gpio=355 mul-sel=6 pull=-1 drv_level=-1 data=0
  196. [ 1.036012] tun: Universal TUN/TAP device driver, 1.6
  197. [ 1.041646] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  198. [ 1.049675] WARNING: Get ephy clock is failed
  199. [ 1.055842] PPP generic driver version 2.4.2
  200. [ 1.061302] PPP BSD Compression module registered
  201. [ 1.066439] PPP Deflate Compression module registered
  202. [ 1.072150] PPP MPPE Compression module registered
  203. [ 1.077382] NET: Registered protocol family 24
  204. [ 1.082462] PPTP driver version 0.8.5
  205. [ 1.086723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  206. [ 1.094277] get ehci0-controller, regulator_io is no nocare
  207. [ 1.100730] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c464c8, 0x:ffffff8000096000, irq_no:68
  208. [ 1.114232] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  209. [ 1.124311] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
  210. [ 1.134419] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0003f6ac8
  211. [ 1.160029] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
  212. [ 1.167760] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  213. [ 1.175437] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  214. [ 1.183467] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  215. [ 1.191786] usb usb1: Manufacturer: Linux 3.10.65 ehci_hcd
  216. [ 1.197778] usb usb1: SerialNumber: sunxi-ehci
  217. [ 1.203813] hub 1-0:1.0: USB hub found
  218. [ 1.207937] hub 1-0:1.0: 1 port detected
  219. [ 1.212659] [ehci0-controller]: sunxi_usb_disable_ehci
  220. [ 1.218271] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000c464c8
  221. [ 1.228819] sunxi-ehci 1c1a000.ehci0-controller: remove, state 1
  222. [ 1.235506] usb usb1: USB disconnect, device number 1
  223. [ 1.242013] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
  224. [ 1.249489] get ehci1-controller drv_vbus_gpio is fail
  225. [ 1.255329] get ehci1-controller, regulator_io is no nocare
  226. [ 1.261586] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000c46738, 0x:ffffff800009e000, irq_no:6a
  227. [ 1.275070] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  228. [ 1.285143] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 1
  229. [ 1.295158] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc0003f6ac8
  230. [ 1.320030] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
  231. [ 1.327638] ehci_irq: highspeed device connect
  232. [ 1.332823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  233. [ 1.340380] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  234. [ 1.348271] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  235. [ 1.356718] usb usb1: Manufacturer: Linux 3.10.65 ehci_hcd
  236. [ 1.362817] usb usb1: SerialNumber: sunxi-ehci
  237. [ 1.368643] hub 1-0:1.0: USB hub found
  238. [ 1.372839] hub 1-0:1.0: 1 port detected
  239. [ 1.377875] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  240. [ 1.384964] get ohci0-controller, regulator_io is no nocare
  241. [ 1.391219] hci: request ohci0-controller gpio:1027
  242. [ 1.396577] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c45fe8
  243. [ 1.407074] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  244. [ 1.416763] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 2
  245. [ 1.426406] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x6b61ff726b6b6462
  246. [ 1.494072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  247. [ 1.501688] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  248. [ 1.509579] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  249. [ 1.517640] usb usb2: Manufacturer: Linux 3.10.65 ohci_hcd
  250. [ 1.523739] usb usb2: SerialNumber: sunxi-ohci
  251. [ 1.529542] hub 2-0:1.0: USB hub found
  252. [ 1.533736] hub 2-0:1.0: 1 port detected
  253. [ 1.538440] [ohci0-controller]: sunxi_usb_disable_ohci
  254. [ 1.544233] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000c45fe8
  255. [ 1.554676] sunxi-ohci 1c1a000.ohci0-controller: remove, state 1
  256. [ 1.561363] usb usb2: USB disconnect, device number 1
  257. [ 1.567770] sunxi-ohci 1c1a000.ohci0-controller: USB bus 2 deregistered
  258. [ 1.575398] get ohci1-controller drv_vbus_gpio is fail
  259. [ 1.581120] get ohci1-controller, regulator_io is no nocare
  260. [ 1.587294] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000c46258
  261. [ 1.597791] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  262. [ 1.607484] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 2
  263. [ 1.617119] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x6b61ff726b6b6462
  264. [ 1.684067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  265. [ 1.690035] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  266. [ 1.699162] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  267. [ 1.707198] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  268. [ 1.715136] usb usb2: Manufacturer: Linux 3.10.65 ohci_hcd
  269. [ 1.721240] usb usb2: SerialNumber: sunxi-ohci
  270. [ 1.727032] hub 2-0:1.0: USB hub found
  271. [ 1.731226] hub 2-0:1.0: 1 port detected
  272. [ 1.736533] usbcore: registered new interface driver cdc_acm
  273. [ 1.742827] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  274. [ 1.751983] usbcore: registered new interface driver usb-storage
  275. [ 1.758844] usbcore: registered new interface driver ums-alauda
  276. [ 1.765628] usbcore: registered new interface driver ums-cypress
  277. [ 1.772503] usbcore: registered new interface driver ums-datafab
  278. [ 1.779366] usbcore: registered new interface driver ums_eneub6250
  279. [ 1.786425] usbcore: registered new interface driver ums-freecom
  280. [ 1.793293] usbcore: registered new interface driver ums-isd200
  281. [ 1.800079] usbcore: registered new interface driver ums-jumpshot
  282. [ 1.807043] usbcore: registered new interface driver ums-karma
  283. [ 1.813771] usbcore: registered new interface driver ums-onetouch
  284. [ 1.820754] usbcore: registered new interface driver ums-realtek
  285. [ 1.827620] usbcore: registered new interface driver ums-sddr09
  286. [ 1.834429] usbcore: registered new interface driver ums-sddr55
  287. [ 1.841203] usbcore: registered new interface driver ums-usbat
  288. [ 1.848406] usbcore: registered new interface driver usbserial
  289. [ 1.855169] usbcore: registered new interface driver option
  290. [ 1.861677] usbserial: USB Serial support registered for GSM modem (1-port)
  291. [ 1.869338] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  292. [ 1.876923] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  293. [ 1.884864] usb 1-1: Product: USB 2.0 Hub
  294. [ 1.890411] hub 1-1:1.0: USB hub found
  295. [ 1.894723] hub 1-1:1.0: 4 ports detected
  296. [ 1.902048] mousedev: PS/2 mouse device common for all mice
  297. [ 1.908730] usbcore: registered new interface driver xpad
  298. [ 1.914967] usbcore: registered new interface driver usb_acecad
  299. [ 1.921768] usbcore: registered new interface driver aiptek
  300. [ 1.928162] usbcore: registered new interface driver gtco
  301. [ 1.934389] usbcore: registered new interface driver hanwang
  302. [ 1.940883] usbcore: registered new interface driver kbtab
  303. [ 1.947179] usbcore: registered new interface driver wacom
  304. [ 1.955440] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0
  305. [ 1.963187] sunxi-rtc 1f00000.rtc: RTC enabled
  306. [ 1.968783] IR NEC protocol handler initialized
  307. [ 1.973829] IR RC5(x) protocol handler initialized
  308. [ 1.979059] IR RC6 protocol handler initialized
  309. [ 1.984180] IR JVC protocol handler initialized
  310. [ 1.989124] IR Sony protocol handler initialized
  311. [ 1.994361] IR RC5 (streamzap) protocol handler initialized
  312. [ 2.000562] IR SANYO protocol handler initialized
  313. [ 2.005698] IR MCE Keyboard/mouse protocol handler initialized
  314. [ 2.012843] Registered IR keymap rc_map_sunxi
  315. [ 2.018301] input: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0/input0
  316. [ 2.026244] rc0: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0
  317. [ 2.033601] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input1
  318. [ 2.044022] sunxi cedar version 0.1
  319. [ 2.048033] [cedar]: install start!!!
  320. [ 2.052280] ycy the get irq is 90
  321. [ 2.056598] ycy clk_bass_vir 0x18 is ffffff80000b6018, the value:3006207
  322. [ 2.064153] ycy clk_bass_vir 0x13c is ffffff80000b613c, the value:0
  323. [ 2.071262] ycy clk_bass_vir 0x64 is ffffff80000b6064, the value:601810
  324. [ 2.078581] ycy clk_bass_vir 0x2c4 is ffffff80000b62c4, the value:601c10
  325. [ 2.086251] ycy clk_bass_vir 0x100 is ffffff80000b6100, the value:0
  326. [ 2.093316] [cedar]: install end!!!
  327. [ 2.140787] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input2
  328. [ 2.165371] sunxi budget cooling probe start !
  329. [ 2.170382] CPU freq cooling register Success
  330. [ 2.175152] CPU hotplug cooling register Success
  331. [ 2.180714] CPU budget cooling register Success
  332. [ 2.186445] sunxi gpu cooling probe start !
  333. [ 2.191113] CPU gpu cooling register Success
  334. [ 2.196237] device-mapper: uevent: version 1.0.3
  335. [ 2.200238] usb 1-1.2: new high-speed USB device number 3 using sunxi-ehci
  336. [ 2.209559] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  337. [ 2.219219] Bluetooth: HCI UART driver ver 2.2
  338. [ 2.224578] Bluetooth: HCI H4 protocol initialized
  339. [ 2.229808] Bluetooth: HCI Three-wire UART (H5) protocol initialized
  340. [ 2.239948] cpuidle: using governor ladder
  341. [ 2.244549] cpuidle: using governor menu
  342. [ 2.250069] sunxi-mmc 1c11000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.37 2015-11-9 15:13) Compiled in Sep 13 2016 at 18:51:56
  343. [ 2.263357] sunxi-mmc 1c11000.sdmmc: regulator prop vmmc,str vcc-emmcv
  344. [ 2.270621] sunxi-mmc 1c11000.sdmmc: regulator prop vqmmc,str vcc-emmcvq18
  345. [ 2.278133] sunxi-mmc 1c11000.sdmmc: regulator prop vdmmc,str none
  346. [ 2.285294] sunxi-mmc 1c11000.sdmmc: No vdmmc regulator found
  347. [ 2.292538] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  348. [ 2.320030] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  349. [ 2.331099] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101
  350. [ 2.331105] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  351. [ 2.331109] usb 1-1.2: Product: USB 2.0 Hub
  352. [ 2.353007] hub 1-1.2:1.0: USB hub found
  353. [ 2.357595] hub 1-1.2:1.0: 4 ports detected
  354. [ 2.370067] sunxi-mmc 1c11000.sdmmc: base:0xffffff80000b8000 irq:94
  355. [ 2.376923] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
  356. [ 2.384260] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.37 2015-11-9 15:13) Compiled in Sep 13 2016 at 18:51:56
  357. [ 2.397316] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
  358. [ 2.404096] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  359. [ 2.404144] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str vcc-sdcv
  360. [ 2.404152] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str vcc-sdcvq33
  361. [ 2.404158] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdcvd
  362. [ 2.438912] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
  363. [ 2.445111] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000c0000 irq:92
  364. [ 2.445627] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  365. [ 2.463662] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 8, RTO !!
  366. [ 2.471143] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
  367. [ 2.477779] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.37 2015-11-9 15:13) Compiled in Sep 13 2016 at 18:51:56
  368. [ 2.490946] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
  369. [ 2.497639] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string
  370. [ 2.504813] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
  371. [ 2.511543] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string
  372. [ 2.518586] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 5, RTO !!
  373. [ 2.525386] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string
  374. [ 2.532546] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
  375. [ 2.539208] get() with no identifier
  376. [ 2.543293] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
  377. [ 2.550074] get() with no identifier
  378. [ 2.553979] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
  379. [ 2.560816] get() with no identifier
  380. [ 2.564720] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 55, RTO !!
  381. [ 2.571557] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found
  382. [ 2.571563] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  383. [ 2.589436] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found
  384. [ 2.589448] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  385. [ 2.589489] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  386. [ 2.589529] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  387. [ 2.630434] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found
  388. [ 2.631269] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  389. [ 2.649189] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  390. [ 2.660410] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
  391. [ 2.668302] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  392. [ 2.680021] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  393. [ 2.702601] mmc0: BKOPS_EN bit is not set
  394. [ 2.708034] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 7 width 1 timing MMC-HS(SDR20) dt B
  395. [ 2.710061] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000c8000 irq:93
  396. [ 2.726532] mmc0: Check switch ready sunxi_mmc_check_timing_switch_done
  397. [ 2.734225] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 7 width 1 timing MMC-HS(SDR20) dt B
  398. [ 2.746145] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS(SDR20) dt B
  399. [ 2.750224] usb 1-1.2.4: new high-speed USB device number 4 using sunxi-ehci
  400. [ 2.765866] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 7 width 8 timing UHS-DDR50 dt B
  401. [ 2.777221] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 7 width 8 timing UHS-DDR50 dt B
  402. [ 2.788675] mmc0: new high speed DDR MMC card at address 0001
  403. [ 2.796857] hidraw: raw HID events driver (C) Jiri Kosina
  404. [ 2.802909] mmcblk0: mmc0:0001 8WPD3R 7.28 GiB
  405. [ 2.809193] mmcblk0boot0: mmc0:0001 8WPD3R partition 1 4.00 MiB
  406. [ 2.817060] mmcblk0boot1: mmc0:0001 8WPD3R partition 2 4.00 MiB
  407. [ 2.825882] mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 >
  408. [ 2.834392] mmcblk0: p1 size 8937472 extends beyond EOD, truncated
  409. [ 2.849858] usbcore: registered new interface driver usbhid
  410. [ 2.851343] mmcblk0boot1: unknown partition table
  411. [ 2.861454] usbhid: USB HID core driver
  412. [ 2.866839] zram: Created 1 device(s) ...
  413. [ 2.867530] mmcblk0boot0: unknown partition table
  414. [ 2.871100] usb 1-1.2.4: New USB device found, idVendor=1a40, idProduct=0101
  415. [ 2.871105] usb 1-1.2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  416. [ 2.871110] usb 1-1.2.4: Product: USB 2.0 Hub
  417. [ 2.897894] *mmc0 lock timeout*
  418. [ 2.901618] drm config service not available: FFFFFFFF[ 2.901873] hub 1-1.2.4:1.0: USB hub found
  419. [ 2.902099] hub 1-1.2.4:1.0: 4 ports detected
  420.  
  421. [ 2.917699] ashmem: initialized
  422. [ 2.921725] logger: created 256K log 'log_main'
  423. [ 2.927058] logger: created 256K log 'log_events'
  424. [ 2.932609] logger: created 256K log 'log_radio'
  425. [ 2.938031] logger: created 256K log 'log_system'
  426. [ 2.944952] usbcore: registered new interface driver snd-usb-audio
  427. [ 2.957101] adda_com_reg_readl: reg = 0xffffff80000545c0
  428. [ 2.962910] adda_com_reg_writel: val = 0x78, reg = 0xffffff80000545c0
  429. [ 2.973993] sunxi-codec-machine sound.6: codec-aif1 <-> 1c22c00.i2s0-controller mapping ok
  430. [ 2.983906] sunxi-codec-machine sound.6: codec-aif2 <-> bb-dai mapping ok
  431. [ 2.992042] sunxi-codec-machine sound.6: codec-aif2 <-> bb-dai mapping ok
  432. [ 3.000121] *mmc1 detect cd change*
  433. [ 3.000178] sunxi-codec-machine sound.6: codec-aif3 <-> bb-dai mapping ok
  434. [ 3.003495] input: audiocodec sunxi Audio Jack as /devices/soc.0/sound.6/sound/card0/input3
  435. [ 3.021071] *mmc1 lock*
  436. [ 3.024062] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  437. [ 3.035828] sndhdmi sound.7: sndhdmi <-> 1c22800.daudio mapping ok
  438. [ 3.044726] u32 classifier
  439. [ 3.047679] Actions configured
  440. [ 3.050051] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  441. [ 3.063106] Netfilter messages via NETLINK v0.30.
  442. [ 3.068349] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  443. [ 3.070836] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  444. [ 3.071661] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  445. [ 3.071676] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  446. [ 3.074077] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  447. [ 3.076254] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  448. [ 3.077078] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  449. [ 3.077900] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  450. [ 3.078723] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  451. [ 3.079360] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  452. [ 3.079400] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  453. [ 3.081794] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  454. [ 3.173767] ctnetlink v0.93: registering with nfnetlink.
  455. [ 3.181619] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  456. [ 3.189226] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  457. [ 3.197098] xt_time: kernel timezone is -0000
  458. [ 3.202059] ipip: IPv4 over IPv4 tunneling driver
  459. [ 3.208271] gre: GRE over IPv4 demultiplexor driver
  460. [ 3.213700] ip_gre: GRE over IPv4 tunneling driver
  461. [ 3.221279] ip_tables: (C) 2000-2006 Netfilter Core Team
  462. [ 3.227487] arp_tables: (C) 2002 David S. Miller
  463. [ 3.230229] usb 1-1.2.4.1: new low-speed USB device number 5 using sunxi-ehci
  464. [ 3.240764] TCP: bic registered
  465. [ 3.244189] TCP: cubic registered
  466. [ 3.247803] TCP: westwood registered
  467. [ 3.251896] TCP: htcp registered
  468. [ 3.255415] Initializing XFRM netlink socket
  469. [ 3.260530] NET: Registered protocol family 10
  470. [ 3.267773] mip6: Mobile IPv6
  471. [ 3.271272] ip6_tables: (C) 2000-2006 Netfilter Core Team
  472. [ 3.277592] sit: IPv6 over IPv4 tunneling driver
  473. [ 3.284151] NET: Registered protocol family 17
  474. [ 3.289075] NET: Registered protocol family 15
  475. [ 3.294590] Bluetooth: RFCOMM TTY layer initialized
  476. [ 3.300059] Bluetooth: RFCOMM socket layer initialized
  477. [ 3.305667] Bluetooth: RFCOMM ver 1.11
  478. [ 3.309757] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  479. [ 3.315817] Bluetooth: BNEP filters: protocol multicast
  480. [ 3.321644] Bluetooth: BNEP socket layer initialized
  481. [ 3.327062] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  482. [ 3.333749] Bluetooth: HIDP socket layer initialized
  483. [ 3.339971] Registering SWP/SWPB emulation handler
  484. [ 3.347184] get usb_serial_number success from boot command line[sw_udc]: alloc request: ep(0xffffffc000af2070, ep0, 64), req(0xffffffc06aa71340)
  485. [ 3.362152] [sw_udc]: sunxi_udc_set_selfpowered_2320: usb device is not active
  486. [ 3.368476] usb 1-1.2.4.1: New USB device found, idVendor=04f2, idProduct=0833
  487. [ 3.368482] usb 1-1.2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  488. [ 3.368486] usb 1-1.2.4.1: Product: USB Keyboard
  489. [ 3.368490] usb 1-1.2.4.1: Manufacturer: CHICONY
  490. [ 3.396972] [sw_udc]: sunxi_udc_pullup, is_on = 0
  491. [ 3.402293] [sw_udc]: sunxi_udc_set_pullup_2337: usb device is not active
  492. [ 3.410189] file system registered
  493. [ 3.410583] input: CHICONY USB Keyboard as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.0/input/input4
  494. [ 3.411412] hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-sunxi-ehci-1.2.4.1/input0
  495. [ 3.421954] input: CHICONY USB Keyboard as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.1/1-1.2.4.1:1.1/input/input5
  496. [ 3.423183] hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-sunxi-ehci-1.2.4.1/input1
  497. [ 3.474281] android_usb gadget: Mass Storage Function, version: 2009/09/11
  498. [ 3.481936] android_usb gadget: Number of LUNs=3
  499. [ 3.487008] lun0: LUN: removable file: (no medium)
  500. [ 3.492510] lun1: LUN: removable file: (no medium)
  501. [ 3.497834] lun2: LUN: removable file: (no medium)
  502. [ 3.504081] [sw_udc]: sunxi_udc_set_selfpowered_2320: usb device is not active
  503. [ 3.512115] android_usb gadget: android_usb ready
  504. [ 3.517248] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
  505. [ 3.520225] usb 1-1.2.4.2: new low-speed USB device number 6 using sunxi-ehci
  506. [ 3.533104] sunxi-rtc 1f00000.rtc: setting system clock to 2017-01-10 12:21:47 UTC (1484050907)
  507. [ 3.544057] input: sunxi-ths as /devices/virtual/input/input6
  508. [ 3.550816] thermal thermal_zone0: failed to read out thermal zone 0
  509. [ 3.566474] ALSA device list:
  510. [ 3.569728] #0: audiocodec
  511. [ 3.572996] #1: sndhdmi
  512. [ 3.576459] Freeing unused kernel memory: 532K (ffffffc000a1a000 - ffffffc000a9f000)
  513. [ 3.587508] init: init started!
  514. [ 3.601305] SELinux: 2048 avtab hash slots, 5054 rules.
  515. [ 3.607302] SELinux: Android master kernel running Android M policy in compatibility mode.
  516. [ 3.622127] SELinux: 2048 avtab hash slots, 5054 rules.
  517. [ 3.627863] SELinux: 1 users, 2 roles, 540 types, 0 bools, 1 sens, 1024 cats
  518. [ 3.635897] SELinux: 87 classes, 5054 rules
  519. [ 3.644157] SELinux: Completing initialization.
  520. [ 3.649207] SELinux: Setting up existing superblocks.
  521. [ 3.655178] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  522. [ 3.663133] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  523. [ 3.667225] usb 1-1.2.4.2: New USB device found, idVendor=046d, idProduct=c00c
  524. [ 3.667230] usb 1-1.2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  525. [ 3.667235] usb 1-1.2.4.2: Product: USB Mouse
  526. [ 3.667240] usb 1-1.2.4.2: Manufacturer: Logitech
  527. [ 3.674288] input: Logitech USB Mouse as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4.2/1-1.2.4.2:1.0/input/input7
  528. [ 3.675298] hid-generic 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-sunxi-ehci-1.2.4.2/input0
  529. [ 3.725224] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  530. [ 3.733759] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  531. [ 3.741516] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  532. [ 3.749423] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
  533. [ 3.758677] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  534. [ 3.784173] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  535. [ 3.791908] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  536. [ 3.799422] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  537. [ 3.809606] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  538. [ 3.817853] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  539. [ 3.826629] SELinux: initialized (dev configfs, type configfs), not configured for labeling
  540. [ 3.835915] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  541. [ 3.843967] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  542. [ 3.925972] type=1403 audit(1484050907.880:2): policy loaded auid=4294967295 ses=4294967295
  543. [ 3.936010] type=1404 audit(1484050907.890:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  544. [ 3.990211] init: (Initializing SELinux enforcing took 0.40s.)
  545. [ 4.003534] init: init second stage started!
  546. [ 4.064291] init: waitpid failed: No child processes
  547. [ 4.070189] init: (Loading properties from /default.prop took 0.00s.)
  548. [ 4.079306] init: (Parsing /init.environ.rc took 0.00s.)
  549. [ 4.085734] init: (Parsing /init.usb.rc took 0.00s.)
  550. [ 4.091586] init: /init.sun50iw1p1.rc: 155: invalid command 'setenforce'
  551. [ 4.098963] init: /init.sun50iw1p1.rc: 202: invalid command 'ifeq'
  552. [ 4.105987] init: /init.sun50iw1p1.rc: 207: invalid option 'endif'
  553. [ 4.113248] init: (Parsing init.sensors.rc took 0.00s.)
  554. [ 4.118963] init: (Parsing init.common.rc took 0.01s.)
  555. [ 4.125003] init: (Parsing init.sun50iw1p1.usb.rc took 0.00s.)
  556. [ 4.131603] init: (Parsing init.zygote64_32.rc took 0.00s.)
  557. [ 4.137698] init: (Parsing /init.sun50iw1p1.rc took 0.05s.)
  558. [ 4.144401] init: (Parsing /init.usb.configfs.rc took 0.00s.)
  559. [ 4.150873] init: /init.zygote64_32.rc: 1: ignored duplicate definition of service 'zygote'
  560. [ 4.160180] init: /init.zygote64_32.rc: 10: ignored duplicate definition of service 'zygote_secondary'
  561. [ 4.170538] init: (Parsing /init.zygote64_32.rc took 0.02s.)
  562. [ 4.176841] init: (Parsing /init.trace.rc took 0.00s.)
  563. [ 4.182672] init: (Parsing /init.rc took 0.10s.)
  564. [ 4.187943] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
  565. [ 4.198664] init: Starting service 'ueventd'...
  566. [ 4.204335] init: Waiting for /dev/.coldboot_done...
  567. [ 4.206477] ueventd: ueventd started!
  568. [ 5.015539] ueventd: Coldboot took 0.80s.
  569. [ 5.022751] init: Waiting for /dev/.coldboot_done took 0.82s.
  570. [ 5.029106] init: /dev/hw_random not found
  571. [ 5.035748] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  572. [ 5.044692] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  573. [ 5.055334] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  574. [ 5.069260] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
  575. [ 5.079130] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
  576. [ 5.090033] mmc1: error -110 whilst initialising SD card
  577. [ 5.090049] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  578. [ 5.090947] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  579. [ 5.090966] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  580. [ 5.092021] *mmc1 unlock*
  581. [ 5.092869] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
  582. [ 5.093693] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
  583. [ 5.093710] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  584. [ 5.096111] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  585. [ 5.097976] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 8, RTO !!
  586. [ 5.098798] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
  587. [ 5.099618] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
  588. [ 5.100438] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
  589. [ 5.101260] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 5, RTO !!
  590. [ 5.102088] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
  591. [ 5.102911] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
  592. [ 5.103733] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
  593. [ 5.104553] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 55, RTO !!
  594. [ 5.104570] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  595. [ 5.105414] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 1, RTO !!
  596. [ 5.105432] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  597. [ 5.106467] *mmc2 unlock*
  598. [ 5.259621] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  599. [ 5.268139] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
  600. [ 5.279348] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  601. [ 5.293130] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
  602. [ 5.301638] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
  603. [ 5.312409] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  604. [ 5.321037] init: /dev/hw_random not found
  605. [ 5.357070] [NAND]Failed to insmod nand!!!
  606. [ 5.368566] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1
  607. [ 5.377901] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
  608. [ 5.385416] fs_mgr: __mount(source=/dev/block/by-name/system,target=/system,type=ext4)=0
  609. [ 5.395500] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
  610. [ 5.411744] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  611. [ 5.423561] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
  612. [ 5.431134] fs_mgr: check_fs(): mount(/dev/block/by-name/cache,/cache,ext4)=0: Success
  613. [ 5.442481] fs_mgr: check_fs(): unmount(/cache) succeeded
  614. [ 5.449666] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
  615. [ 5.529230] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  616. [ 5.529230]
  617. [ 5.535979] e2fsck: /dev/block/by-name/cache: clean, 18/49152 files, 6363/196608 blocks
  618. [ 5.535979]
  619. [ 5.547765] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
  620. [ 5.561308] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  621. [ 5.576408] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
  622. [ 5.583972] fs_mgr: __mount(source=/dev/block/by-name/cache,target=/cache,type=ext4)=0
  623. [ 5.593775] EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
  624. [ 5.609454] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  625. [ 5.621269] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
  626. [ 5.628703] fs_mgr: check_fs(): mount(/dev/block/by-name/alog,/logger,ext4)=0: Success
  627. [ 5.641130] fs_mgr: check_fs(): unmount(/logger) succeeded
  628. [ 5.647177] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/alog
  629. [ 5.678271] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  630. [ 5.678271]
  631. [ 5.685027] e2fsck: /dev/block/by-name/alog: clean, 11/5120 files, 1359/20480 blocks
  632. [ 5.685027]
  633. [ 5.696305] EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
  634. [ 5.708605] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  635. [ 5.723731] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
  636. [ 5.731266] fs_mgr: __mount(source=/dev/block/by-name/alog,target=/logger,type=ext4)=0
  637. [ 5.740795] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
  638. [ 5.747471] fs_mgr: check_fs(): mount(/dev/block/by-name/UDISK,/data,ext4)=-1: Invalid argument
  639. [ 5.757301] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/UDISK
  640. [ 5.785369] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  641. [ 5.785369]
  642. [ 5.792102] e2fsck: ext2fs_open2: Bad magic number in super-block
  643. [ 5.792102]
  644. [ 5.800523] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks...
  645. [ 5.800523]
  646. [ 5.810678] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/by-name/UDISK
  647. [ 5.810678]
  648. [ 5.824116] e2fsck:
  649. [ 5.824116]
  650. [ 5.828119] e2fsck: The superblock could not be read or does not describe a correct ext2
  651. [ 5.828119]
  652. [ 5.838825] e2fsck: filesystem. If the device is valid and it really contains an ext2
  653. [ 5.838825]
  654. [ 5.849272] e2fsck: filesystem (and not swap or ufs or something else), then the superblock
  655. [ 5.849272]
  656. [ 5.860202] e2fsck: is corrupt, and you might try running e2fsck with an alternate superblock:
  657. [ 5.860202]
  658. [ 5.871444] e2fsck: e2fsck -b 8193 <device>
  659. [ 5.871444]
  660. [ 5.878008] e2fsck:
  661. [ 5.878008]
  662. [ 5.882199] e2fsck: e2fsck terminated by exit(8)
  663. [ 5.882199]
  664. [ 5.889933] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
  665. [ 5.896719] fs_mgr: __mount(source=/dev/block/by-name/UDISK,target=/data,type=ext4)=-1
  666. [ 5.906274] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/by-name/UDISK for mount /data type ext4 )
  667. [ 5.918881] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  668. [ 5.954981] Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
  669. [ 5.965682] FAT-fs (mmcblk0p17): bogus number of reserved sectors
  670. [ 5.972462] FAT-fs (mmcblk0p17): Can't find a valid FAT filesystem
  671. [ 6.147144] [DISP]disp_module_init
  672. [ 6.153417] [DISP] boot_disp:0x405
  673. [ 6.157851] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  674. [ 6.168336] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  675. [ 6.178826] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  676. [ 6.190019] *mmc1 detect cd change*
  677. [ 6.193826] *mmc1 lock*
  678. [ 6.196507] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  679. [ 6.205342] [DISP] fb_base:0x47400000
  680. [ 6.230055] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  681. [ 6.253990] [DISP]disp_module_init finish
  682. [ 6.260896] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  683. [ 6.268582] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  684. [ 6.275355] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  685. [ 6.289617] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  686. [ 6.303232] enter tr_probe
  687. [ 6.303629] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  688. [ 6.304458] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  689. [ 6.305282] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  690. [ 6.306107] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  691. [ 6.306752] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  692. [ 6.306822] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  693. [ 6.309221] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  694. [ 6.367956] exit tr_probe
  695. [ 6.386969] [DISP] boot_disp:0x405
  696. [ 6.392334] [HDMI] power vcc-hdmi-33
  697. [ 6.396785] [HDMI] cec support = 0
  698. [ 6.914357] [DISP] disp_device_attached,line:101:attched ok, mgr0<-->device0, type=4
  699. [ 7.045399] Mali: Set gpu frequency to 456 MHz
  700. [ 7.050446] Mali: Init Mali gpu clocks successfully
  701. [ 7.067375] gpu cooling callback register Success
  702. [ 7.072656] Mali: Mali device driver loaded
  703. [ 7.098343] input: sunxi-keyboard as /devices/virtual/input/input8
  704. [ 7.111851] failed to get easy_light_used assign
  705. [ 7.116924] failed to get normal led pin assign
  706. [ 7.122063] failed to get standby led pin assign
  707. [ 7.127105] failed to get standby led pin assign
  708. [ 7.132408] gpio_pin_1(227) gpio_is_valid
  709. [ 7.137296] gpio_pin_2(226) gpio_is_valid
  710. [ 7.142089] gpio_pin_3(230) gpio_is_valid
  711. [ 7.146817] gpio_pin_4(231) gpio_is_valid
  712. [ 7.151593] gpio_pin_5(234) gpio_is_valid
  713. [ 7.156333] gpio_pin_6(235) gpio_is_valid
  714. [ 7.161092] gpio_pin_7(98) gpio_is_valid
  715. [ 7.165742] gpio_pin_8(99) gpio_is_valid
  716. [ 7.170379] gpio_pin_9(97) gpio_is_valid
  717. [ 7.174996] gpio_pin_10(68) gpio_is_valid
  718. [ 7.179709] gpio_pin_11(71) gpio_is_valid
  719. [ 7.184721] gpio_pin_12(37) gpio_is_valid
  720. [ 7.189726] gpio_pin_13(36) gpio_is_valid
  721. [ 7.194925] gpio_pin_14(38) gpio_is_valid
  722. [ 7.200077] gpio_pin_15(364) gpio_is_valid
  723. [ 7.205288] gpio_pin_16(32) gpio_is_valid
  724. [ 7.210397] gpio_pin_17(33) gpio_is_valid
  725. [ 7.215542] gpio_pin_18(35) gpio_is_valid
  726. [ 7.220794] gpio_pin_19(34) gpio_is_valid
  727. [ 7.225938] gpio_pin_20(100) gpio_is_valid
  728. [ 7.231149] gpio_pin_21(64) gpio_is_valid
  729. [ 7.236230] gpio_pin_22(96) gpio_is_valid
  730. [ 7.241380] gpio_pin_23(66) gpio_is_valid
  731. [ 7.246506] gpio_pin_24(67) gpio_is_valid
  732. [ 7.251641] gpio_pin_25(39) gpio_is_valid
  733. [ 7.256717] gpio_pin_26(361) gpio_is_valid
  734. [ 7.261976] gpio_pin_27(359) gpio_is_valid
  735. [ 7.267185] gpio_pin_28(360) gpio_is_valid
  736. [ 7.272409] gpio_pin_29(142) gpio_is_valid
  737. [ 7.277596] gpio_pin_30(143) gpio_is_valid
  738. [ 7.283143] gpio name is PH3, ret = 0
  739. [ 7.288036] gpio name is PH2, ret = 0
  740. [ 7.292860] gpio name is PH6, ret = 0
  741. [ 7.297630] gpio name is PH7, ret = 0
  742. [ 7.302515] gpio name is PH10, ret = 0
  743. [ 7.307436] gpio name is PH11, ret = 0
  744. [ 7.312440] gpio name is PD2, ret = 0
  745. [ 7.317249] gpio name is PD3, ret = 0
  746. [ 7.322098] gpio name is PD1, ret = 0
  747. [ 7.326932] gpio name is PC4, ret = 0
  748. [ 7.331758] gpio name is PC7, ret = 0
  749. [ 7.336575] gpio name is PB5, ret = 0
  750. [ 7.341458] gpio name is PB4, ret = 0
  751. [ 7.346403] gpio name is PB6, ret = 0
  752. [ 7.351265] gpio name is PL12, ret = 0
  753. [ 7.356138] gpio name is PB0, ret = 0
  754. [ 7.361078] gpio name is PB1, ret = 0
  755. [ 7.365953] gpio name is PB3, ret = 0
  756. [ 7.370765] gpio name is PB2, ret = 0
  757. [ 7.375560] gpio name is PD4, ret = 0
  758. [ 7.380400] gpio name is PC0, ret = 0
  759. [ 7.385237] gpio name is PD0, ret = 0
  760. [ 7.389997] gpio name is PC2, ret = 0
  761. [ 7.394808] gpio name is PC3, ret = 0
  762. [ 7.399603] gpio name is PB7, ret = 0
  763. [ 7.404446] gpio name is PL9, ret = 0
  764. [ 7.409222] gpio name is PL7, ret = 0
  765. [ 7.414140] gpio name is PL8, ret = 0
  766. [ 7.418972] gpio name is PE14, ret = 0
  767. [ 7.423915] gpio name is PE15, ret = 0
  768. [ 7.429288] gpio_init finish with uesd
  769. [ 7.446797] ctp_fetch_sysconfig_para: ctp_power_io is invalid.
  770. [ 7.511298] i2c-core: driver [ft5x_ts] using legacy suspend method
  771. [ 7.518066] i2c-core: driver [ft5x_ts] using legacy resume method
  772. [ 7.525142] sunxi_i2c_do_xfer()902 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  773. [ 7.550173] sunxi_i2c_do_xfer()902 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  774. [ 7.559215] ctp_detect:I2C connection might be something wrong !
  775. [ 7.560045] gpu cooling callback set freq limit 0
  776. [ 7.613705] [VFE]cci probe end cci_sel = 0!
  777. [ 7.619276] [VFE]cci_init end
  778. [ 7.691821] [VFE]Welcome to Video Front End driver
  779. [ 7.697423] [VFE]csi0 probe end!
  780. [ 7.702014] [VFE]csi_init end
  781. [ 7.706178] [ISP] isp platform_id = 3!
  782. [ 7.710389] [VFE]isp0 probe end!
  783. [ 7.714828] [VFE]sunxi_isp_platform_register end
  784. [ 7.720898] [VFE]mipi_init end
  785. [ 7.724236] [VFE]flash_init end
  786. [ 7.729379] [VFE]pdev->id = 0
  787. [ 7.732846] [VFE]dev->cci_sel = 0
  788. [ 7.736465] [VFE]dev->csi_sel = 0
  789. [ 7.740209] [VFE]dev->mipi_sel = 0
  790. [ 7.743920] [VFE]dev->isp_sel = 0
  791. [ 7.747552] [VFE_WARN]fetch csi0_dev0_twi_id from device_tree failed
  792. [ 7.754779] [VFE_WARN]fetch csi0_dev0_power_en from device_tree failed
  793. [ 7.762072] [VFE_WARN]fetch csi0_dev0_flash_en from device_tree failed
  794. [ 7.769208] [VFE_WARN]fetch csi0_dev0_flash_mode from device_tree failed
  795. [ 7.776783] [VFE_WARN]fetch csi0_dev0_flvdd from device_tree failed
  796. [ 7.783755] [VFE_WARN]fetch csi0_dev0_flvdd_vol from device_tree failed
  797. [ 7.791112] [VFE_WARN]fetch csi0_dev0_af_pwdn from device_tree failed
  798. [ 7.798232] [VFE]fetch rear sensor list info start!
  799. [ 7.803770] [VFE]Fetch sensor list form"/system/etc/hawkview/sensor_list_cfg.ini"
  800. [ 8.041821] [VFE]fetch sensor common config!
  801. [ 8.046603] [VFE]fetch sensor detect config!
  802. [ 8.349079] [VFE]fetch rear sensor list info end!
  803. [ 8.355799] [VFE]vfe_init end
  804. [ 8.360043] [VFE]probe_work_handle start!
  805. [ 8.364650] [VFE]vfe_runtime_resume
  806. [ 8.381429] [VFE]..........................vfe clk open!.......................
  807. [ 8.390633] [VFE]v4l2 subdev register input_num = 0
  808. [ 8.400247] axp81x_dldo3: Failed to create debugfs directory
  809. [ 8.410128] mmc1: error -110 whilst initialising SD card
  810. [ 8.415977] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  811. [ 8.417214] axp81x_dldo3: Failed to create debugfs directory
  812. [ 8.417219] [VFE]vfe sensor detect start! input_num = 0
  813. [ 8.417222] [VFE]VCM driver name is "dw9714_act".
  814. [ 8.417227] [VFE]Find sensor name is "ov5640", i2c address is 78, type is "YUV" !
  815. [ 8.417230] [VFE]Sub device register "ov5640" i2c_addr = 0x78 start!
  816. [ 8.417236] [VFE]v4l2_device_register_subdev return 0
  817. [ 8.417238] [VFE]registered sensor subdev is OK!
  818. [ 8.417240] [VFE]Check sensor!
  819. [ 8.430855] [VFE]mclk on
  820. [ 8.477687] dhd_module_init: in
  821. [ 8.481203] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  822. [ 8.487777] ======== bcm_wlan_set_plat_data ========
  823. [ 8.487890] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  824. [ 8.488943] *mmc1 lock timeout*
  825. [ 8.508038] host_oob_irq: 4
  826. [ 8.511541] [VFE CCI_0 ERR] Status error at addr_8bit = 78, wr_flag = 1, val = 6ef70a30
  827. [ 8.520045] host_oob_irq_flags=16516
  828. [ 8.520048] dhd_wifi_platform_load: Enter
  829. [ 8.520103] Power-up adapter 'DHD generic adapter'
  830. [ 8.520869] wifi_platform_set_power = 1
  831. [ 8.520871] ======== PULL WL_REG_ON HIGH! ========
  832. [ 8.521101] sunxi-wlan wlan.28: check wlan wlan_power voltage: 3300000
  833. [ 8.521306] sunxi-wlan wlan.28: check wlan io_regulator voltage: 3300000
  834. [ 8.558621] [VFE CCI_0 ERR] Status error at addr_8bit = 78, wr_flag = 1, val = 6e000a30
  835. [ 8.567758] [VFE CCI_0 ERR] Status error at addr_8bit = 78, wr_flag = 1, val = 6e000a30
  836. [ 8.576658] ov5640 sensor read retry=2
  837. [ 8.580823] [OV5640]error at sensor_detect
  838. [ 8.585297] [OV5640]chip found is not an target chip.
  839. [ 8.590984] [VFE]mclk off
  840. [ 8.630338] [VFE]vfe sensor subdev unregister!
  841. [ 8.635195] [VFE]Sub device register "ov5640" failed!
  842. [ 8.640896] [VFE_ERR]vfe sensor register check error at input_num = 0
  843. [ 8.647952] [VFE]V4L2 device registered as (null)
  844. [ 8.653333] [VFE]vfe_runtime_suspend
  845. [ 8.657234] [VFE]..........................vfe clk close!.......................
  846. [ 8.671698] [VFE]probe_work_handle end!
  847. [ 8.840024] wifi_platform_bus_enumerate device present 1
  848. [ 8.845826] sunxi-wlan wlan.28: bus_index: 1
  849. [ 8.850665] ======== Card detection to detect SDIO card! ========
  850. [ 8.857456] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  851. [ 8.868654] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
  852. [ 8.890021] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  853. [ 8.920833] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
  854. [ 8.928419] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
  855. [ 8.935096] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  856. [ 8.949197] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  857. [ 8.962654] sunxi-mmc 1c10000.sdmmc: smc 2 p1 err, cmd 8, RTO !!
  858. [ 8.969650] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  859. [ 8.990386] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  860. [ 8.997990] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  861. [ 9.005612] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  862. [ 9.014435] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  863. [ 9.106490] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
  864. [ 9.118057] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
  865. [ 9.129843] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B
  866. [ 9.142880] mmc2: new high speed SDIO card at address 0001
  867. [ 9.151665] *mmc2 lock timeout*
  868. [ 9.167908] bcmsdh_register: register client driver
  869. [ 9.173424] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  870. [ 9.178727] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  871. [ 9.184152] bus num (host idx)=2, slot num (rca)=1
  872. [ 9.189383] found adapter info 'DHD generic adapter'
  873. [ 9.195246] dhdsdio_probe : no mutex held. set lock
  874. [ 9.200776] F1 signature read @0x18000000=0x1530a9a6
  875. [ 9.208093] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x3
  876. [ 9.216035] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  877. [ 9.223545] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
  878. [ 9.229383] dhd_conf_set_conf_path_by_nv_path: config_path=/system/vendor/modules/config.txt
  879. [ 9.238906] dhd_conf_read_config: Ignore config file /system/vendor/modules/config.txt
  880. [ 9.250632] wl_create_event_handler(): thread:wl_event_handler:683 started
  881. [ 9.258401] tsk Enter, tsk = 0xffffffc067fe19c0
  882. [ 9.263718] dhd_attach(): thread:dhd_watchdog_thread:685 started
  883. [ 9.270485] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
  884. [ 9.276781] dhd_attach(): thread:dhd_dpc:686 started
  885. [ 9.282485] dhd_attach(): thread:dhd_rxf:687 started
  886. [ 9.287933] dhd_deferred_work_init: work queue initialized
  887. [ 9.294884] dhdsdio_probe_init: set use_rxchain 1 from config.txt
  888. [ 9.308216] Dongle Host Driver, version 1.201.59.3 (r506368)
  889. [ 9.308216] Compiled in drivers/net/wireless/bcmdhd on Sep 13 2016 at 18:52:06
  890. [ 9.325986] Register interface [wlan0] MAC: 44:2c:05:ed:f2:a7
  891. [ 9.325986]
  892. [ 9.334155] dhd_prot_ioctl : bus is down. we have nothing to do
  893. [ 9.340770] bcmsdh_oob_intr_unregister: Enter
  894. [ 9.345527] bcmsdh_oob_intr_unregister: irq is not registered
  895. [ 9.352001] dhd_txglom_enable: enable 0
  896. [ 9.356187] dhd_bus_devreset: WLAN OFF DONE
  897. [ 9.361038] wifi_platform_set_power = 0
  898. [ 9.365272] ======== PULL WL_REG_ON LOW! ========
  899. [ 9.371151] dhdsdio_probe : the lock is released.
  900. [ 9.377089] dhd_module_init: Exit err=0
  901. [ 9.389768] [BT_LPM] bluesleep_init: BlueSleep Mode Driver Ver 1.2
  902. [ 9.397042] [BT_LPM] bluesleep_probe: bt_hostwake gpio=357 mul-sel=6 pull=-1 drv_level=-1 data=0
  903. [ 9.397042]
  904. [ 9.408887] [BT_LPM] bluesleep_probe: bt_wake gpio=358 mul-sel=1 pull=-1 drv_level=-1 data=1
  905. [ 9.408887]
  906. [ 9.420314] [BT_LPM] bluesleep_probe: uart_index (1)
  907. [ 9.420314]
  908. [ 9.432745] init: Starting service 'logd'...
  909. [ 9.453584] init: (Loading properties from /system/build.prop took 0.01s.)
  910. [ 9.461619] init: (Loading properties from /vendor/build.prop took 0.00s.)
  911. [ 9.469707] init: (Loading properties from /factory/factory.prop took 0.00s.)
  912. [ 9.478194] init: /recovery not specified in fstab
  913. [ 9.484156] init: void property_opt_for_mem(): start!
  914. [ 9.491676] get_item_store: input buf lcd0_para lcd_x
  915. [ 9.500097] get_item_store: get "lcd0_para"->"lcd_x"
  916. [ 9.505568] get_item_show(798) err: script_get_item failed for "lcd0_para"->"lcd_x"
  917. [ 9.511060] logd.auditd: start
  918. [ 9.511089] logd.klogd: 9511092503
  919. [ 9.521388] get_item_store: input buf lcd0 lcd_x
  920. [ 9.526440] get_item_store: get "lcd0"->"lcd_x"
  921. [ 9.531582] get_item_show(802): script_get_item return type [int] for lcd0->lcd_x
  922. [ 9.539758] get_item_store: input buf lcd0_para lcd_y
  923. [ 9.545507] get_item_store: get "lcd0_para"->"lcd_y"
  924. [ 9.551031] get_item_show(798) err: script_get_item failed for "lcd0_para"->"lcd_y"
  925. [ 9.559398] get_item_store: input buf lcd0 lcd_y
  926. [ 9.564666] get_item_store: get "lcd0"->"lcd_y"
  927. [ 9.569615] get_item_show(802): script_get_item return type [int] for lcd0->lcd_y
  928. [ 9.578582] init: void property_opt_for_mem(): width_dp = 800; height_dp = 480; screenSize = 2; bSupport64Bit = 1, g_total_mem = 1986
  929. [ 9.590025] *mmc1 detect cd change*
  930. [ 9.590029] *mmc1 lock*
  931. [ 9.590048] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  932. [ 9.610030] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  933. [ 9.610694] init: void property_opt_for_mem(): end!
  934. [ 9.612995] init: Starting service 'vold'...
  935. [ 9.614322] init: Not bootcharting.
  936. [ 9.636133] type=1400 audit(1484050913.570:4): avc: denied { execute_no_trans } for pid=1686 comm="init" path="/system/bin/sh" dev="mmcblk0p7" ino=451 scontext=u:r:init:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=0
  937. [ 9.658955] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  938. [ 9.666538] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  939. [ 9.673351] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  940. [ 9.684478] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
  941. [ 9.694915] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  942. [ 9.699174] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 1688) exited with status 0
  943. [ 9.700668] init: property_set("ro.bt.bdaddr_path", "/data/misc/bluetooth/bdaddr") failed
  944. [ 9.716433] FAT-fs (mmcblk0p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  945. [ 9.716530] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
  946. [ 9.716906] init: Starting service 'bootclone'...
  947. [ 9.717836] init: (Loading properties from /data/local.prop took 0.00s.)
  948. [ 9.718378] init: Starting service 'logd-reinit'...
  949. [ 9.725056] init: Starting service 'healthd'...
  950. [ 9.726322] init: Starting service 'lmkd'...
  951. [ 9.727624] init: Starting service 'servicemanager'...
  952. [ 9.728872] binder: 1691:1691 transaction failed 29189, size 0-0
  953. [ 9.729001] init: Starting service 'surfaceflinger'...
  954. [ 9.729817] init: cannot find '/system/bin/tee_supplicant', disabling 'optee'
  955. [ 9.730645] init: Starting service 'sayeye'...
  956. [ 9.733352] init: Starting service 'zygote'...
  957. [ 9.734608] init: Starting service 'zygote_secondary'...
  958. [ 9.737500] init: Starting service 'console'...
  959. [ 9.739111] init: Service 'bootclone' (pid 1689) exited with status 0
  960. [ 9.744007] init: Starting service 'defaultcrypto'...
  961. [ 9.744989] android_usb: already disabled
  962. [ 9.745463] init: Starting service 'adbd'...
  963. [ 9.760221] adb_open
  964. [ 9.760231] mtp_bind_config
  965. [ 9.760242] gadget_is_softwinner_otg is not -int
  966. [ 9.760244] gadget_is_softwinner_otg is not -int
  967. [ 9.760260] [sw_udc]: alloc request: ep(0xffffffc000af20f0, ep1in-bulk, 512), req(0xffffffc0690e0840)
  968. [ 9.760395] [sw_udc]: alloc request: ep(0xffffffc000af20f0, ep1in-bulk, 512), req(0xffffffc0690978c0)
  969. [ 9.760509] [sw_udc]: alloc request: ep(0xffffffc000af20f0, ep1in-bulk, 512), req(0xffffffc069097940)
  970. [ 9.760628] [sw_udc]: alloc request: ep(0xffffffc000af20f0, ep1in-bulk, 512), req(0xffffffc0690979c0)
  971. [ 9.760742] [sw_udc]: alloc request: ep(0xffffffc000af2170, ep1out-bulk, 512), req(0xffffffc069097a40)
  972. [ 9.760857] [sw_udc]: alloc request: ep(0xffffffc000af2170, ep1out-bulk, 512), req(0xffffffc069097ac0)
  973. [ 9.760977] [sw_udc]: alloc request: ep(0xffffffc000af2370, ep4-int, 512), req(0xffffffc069097b40)
  974. [ 9.760984] [sw_udc]: alloc request: ep(0xffffffc000af2370, ep4-int, 512), req(0xffffffc069097bc0)
  975. [ 9.760991] [sw_udc]: alloc request: ep(0xffffffc000af2370, ep4-int, 512), req(0xffffffc069097c40)
  976. [ 9.761001] [sw_udc]: alloc request: ep(0xffffffc000af2370, ep4-int, 512), req(0xffffffc069113e40)
  977. [ 9.761008] [sw_udc]: alloc request: ep(0xffffffc000af2370, ep4-int, 512), req(0xffffffc069113dc0)
  978. [ 9.761012] adb_bind_config
  979. [ 9.761022] [sw_udc]: alloc request: ep(0xffffffc000af2270, ep2out-bulk, 512), req(0xffffffc069113d40)
  980. [ 9.761059] [sw_udc]: alloc request: ep(0xffffffc000af21f0, ep2in-bulk, 512), req(0xffffffc069113cc0)
  981. [ 9.761094] [sw_udc]: alloc request: ep(0xffffffc000af21f0, ep2in-bulk, 512), req(0xffffffc069113c40)
  982. [ 9.761129] [sw_udc]: alloc request: ep(0xffffffc000af21f0, ep2in-bulk, 512), req(0xffffffc069113bc0)
  983. [ 9.761163] [sw_udc]: alloc request: ep(0xffffffc000af21f0, ep2in-bulk, 512), req(0xffffffc069113b40)
  984. [ 9.761198] [sw_udc]: sunxi_udc_pullup, is_on = 1
  985. [ 9.761203] [sw_udc]: sunxi_udc_set_pullup_2337: usb device is not active
  986. [ 9.787397] init: Service 'logd-reinit' (pid 1690) exited with status 0
  987. [ 9.789037] logd.daemon: reinit
  988. [ 10.048952] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  989. [ 10.056654] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  990. [ 10.064205] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  991. [ 10.071708] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  992. [ 10.080168] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  993. [ 10.092272] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  994. [ 10.106772] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  995. [ 10.110199]
  996. [ 10.110199]
  997. [ 10.110199] insmod_device_driver
  998. [ 10.110199]
  999. [ 10.110205] [sw_udc]: sunxi_usb_device_enable start
  1000. [ 10.110208] [sw_udc]: open_usb_clock
  1001. [ 10.110254] [sw_udc]: usbd_stop_work
  1002. [ 10.110303] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED: USBC_TS_MODE_HS
  1003. [ 10.110308] [sw_udc]: usbd_start_work
  1004. [ 10.110310] [sw_udc]: usbd_start_work
  1005. [ 10.110313] [sw_udc]: sunxi_usb_device_enable end
  1006. [ 10.165755] [sw_udc]: IRQ: suspend
  1007. [ 10.169477] [sw_udc]: ERR: usb speed is unkown
  1008. [ 10.183509] [DISP] disp_ioctl,line:1837:copy_from_user fail
  1009. [ 10.189641] [DISP] disp_ioctl,line:1664:para err in disp_ioctl, cmd = 0xb,screen id = 0
  1010. [ 10.226943] init: Starting service 'bootanim'...
  1011. shell@tulip-bpi-m64:/ $ [ 10.264719] [sw_udc]: IRQ: reset
  1012. [ 10.268258] [sw_udc]: (1:star,2:end): vfs_read:0, vfs_write:0,dma_working:0,amount:0,file_offset:0
  1013. [ 10.270030] [sw_udc]: irq: reset happen, throw away all urb
  1014. [ 10.350870] [sw_udc]:
  1015. +++++++++++++++++++++++++++++++++++++
  1016. [ 10.357174] [sw_udc]: usb enter high speed.
  1017. [ 10.360018] [sw_udc]:
  1018. +++++++++++++++++++++++++++++++++++++
  1019. [ 10.368556] [sw_udc]: Set address 59
  1020. [ 10.373194] android_work: sent uevent USB_STATE=CONNECTED
  1021. [ 10.461222] android_usb gadget: high-speed config #1: android
  1022. [ 10.467528] [sw_udc]: ep enable: ep1(0xffffffc000af20f0, ep1in-bulk, 128, 512)
  1023. [ 10.470029] [sw_udc]: ep enable: ep1(0xffffffc000af20f0, ep1in-bulk, 128, 512), fifo(512, 1024, 1)
  1024. [ 10.470029] [sw_udc]: ep enable: ep1(0xffffffc000af2170, ep1out-bulk, 0, 512)
  1025. [ 10.470029] [sw_udc]: ep enable: ep1(0xffffffc000af2170, ep1out-bulk, 0, 512), fifo(1536, 1024, 1)
  1026. [ 10.470029] [sw_udc]: ep enable: ep4(0xffffffc000af2370, ep4-int, 128, 28)
  1027. [ 10.470029] [sw_udc]: ep enable: ep4(0xffffffc000af2370, ep4-int, 128, 28), fifo(5632, 512, 0)
  1028. [ 10.470029] [sw_udc]: ep enable: ep2(0xffffffc000af21f0, ep2in-bulk, 128, 512)
  1029. [ 10.470029] [sw_udc]: ep enable: ep2(0xffffffc000af21f0, ep2in-bulk, 128, 512), fifo(2560, 1024, 1)
  1030. [ 10.470029] [sw_udc]: ep enable: ep2(0xffffffc000af2270, ep2out-bulk, 0, 512)
  1031. [ 10.470029] [sw_udc]: ep enable: ep2(0xffffffc000af2270, ep2out-bulk, 0, 512), fifo(3584, 1024, 1)
  1032. [ 10.557521] [sw_udc]: nuke: ep num is 0
  1033. [ 10.564793] android_work: sent uevent USB_STATE=CONFIGURED
  1034. [ 11.617534] bio: create slab <bio-1> at 1
  1035. [ 12.203129] healthd: battery none chg=a 2017-01-10 12:21:56.168116545 UTC
  1036. [ 12.280095] mmc1: error -110 whilst initialising SD card
  1037. [ 12.286409] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1038. [ 12.300332] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1039. [ 12.307136] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1040. [ 12.319764] *mmc1 lock timeout*
  1041. [ 12.955518] EXT4-fs (dm-0): Ignoring removed nomblk_io_submit option
  1042. [ 12.970465] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 99585
  1043. [ 12.979613] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 99622
  1044. [ 12.993225] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 131135
  1045. [ 13.006570] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 133842
  1046. [ 13.016285] EXT4-fs (dm-0): 4 orphan inodes deleted
  1047. [ 13.021788] EXT4-fs (dm-0): recovery complete
  1048. [ 13.040597] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  1049. [ 13.052549] SELinux: initialized (dev dm-0, type ext4), uses xattr
  1050. [ 13.059579] fs_mgr: check_fs(): mount(/dev/block/dm-0,/data,ext4)=0: Success
  1051. [ 13.069689] fs_mgr: check_fs(): unmount(/data) succeeded
  1052. [ 13.075965] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-0
  1053. [ 13.112976] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  1054. [ 13.112976]
  1055. [ 13.119864] e2fsck: /dev/block/dm-0: clean, 9109/276352 files, 548847/1104896 blocks
  1056. [ 13.119864]
  1057. [ 13.131751] EXT4-fs (dm-0): Ignoring removed nomblk_io_submit option
  1058. [ 13.146283] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  1059. [ 13.160976] SELinux: initialized (dev dm-0, type ext4), uses xattr
  1060. [ 13.167869] fs_mgr: __mount(source=/dev/block/dm-0,target=/data,type=ext4)=0
  1061. [ 13.177178] init: (Loading properties from /data/local.prop took 0.00s.)
  1062. [ 13.254471] init: Starting service 'logd-reinit'...
  1063. [ 13.264762] init: Not bootcharting.
  1064. [ 13.282210] logd.daemon: reinit
  1065. [ 13.287793] init: Service 'logd-reinit' (pid 1966) exited with status 0
  1066. [ 13.336207] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
  1067. [ 13.359569] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 1972) exited with status 0
  1068. [ 13.371610] init: property_set("ro.bt.bdaddr_path", "/data/misc/bluetooth/bdaddr") failed
  1069. [ 13.381996] init: Starting service 'bootclone'...
  1070. [ 13.401149] init: Service 'bootclone' (pid 1976) exited with status 0
  1071. [ 13.409202] init: Starting service 'netd'...
  1072. [ 13.415626] init: Starting service 'debuggerd'...
  1073. [ 13.422205] init: Starting service 'debuggerd64'...
  1074. [ 13.429012] init: Starting service 'ril-daemon'...
  1075. [ 13.430121] *mmc1 detect cd change*
  1076. [ 13.430129] *mmc1 lock*
  1077. [ 13.430153] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1078. [ 13.450110] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1079. [ 13.465712] init: Starting service 'drm'...
  1080. [ 13.471228] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1081. [ 13.471842] init: Starting service 'media'...
  1082. [ 13.473003] init: Starting service 'installd'...
  1083. [ 13.473717] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
  1084. [ 13.474225] init: Starting service 'keystore'...
  1085. [ 13.475406] init: Starting service 'logger_private'...
  1086. [ 13.476704] init: Starting service 'gatekeeperd'...
  1087. [ 13.514464] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1088. [ 13.521365] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1089. [ 13.535710] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1090. [ 13.548128] init: Starting service 'perfprofd'...
  1091. [ 13.556717] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1092. [ 13.564389] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1093. [ 13.571934] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1094. [ 13.579437] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1095. [ 13.586915] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1096. [ 13.599286] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1097. [ 13.613423] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1098. [ 13.639729] init: Service 'logger_private' (pid 1989) exited with status 1
  1099. [ 14.409996] init: Service 'defaultcrypto' (pid 1700) exited with status 0
  1100. [ 15.620067] mmc1: error -110 whilst initialising SD card
  1101. [ 15.626853] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1102. [ 15.641348] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1103. [ 15.648001] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1104. [ 15.661340] *mmc1 lock timeout*
  1105. [ 16.747446] warning: `system_server' uses 32-bit capabilities (legacy support in use)
  1106. [ 16.760063] *mmc1 detect cd change*
  1107. [ 16.763895] *mmc1 lock*
  1108. [ 16.766592] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1109. [ 16.790162] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1110. [ 16.820941] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1111. [ 16.828660] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1112. [ 16.835635] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1113. [ 16.852466] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1114. [ 16.866939] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1115. [ 16.874602] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1116. [ 16.882220] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1117. [ 16.889714] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1118. [ 16.899370] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1119. [ 16.911395] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1120. [ 16.927085] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1121. [ 17.560140] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
  1122. [ 17.585046] CPU Budget hotplug: cluster0 min:0 max:4
  1123. [ 18.940231] mmc1: error -110 whilst initialising SD card
  1124. [ 18.946962] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1125. [ 18.960497] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1126. [ 18.967312] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1127. [ 18.981846] *mmc1 lock timeout*
  1128. [ 19.592320] CPU Budget hotplug: cluster0 min:0 max:4
  1129. [ 20.080088] *mmc1 detect cd change*
  1130. [ 20.084603] *mmc1 lock*
  1131. [ 20.088578] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1132. [ 20.120143] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1133. [ 20.150886] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1134. [ 20.158508] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1135. [ 20.165394] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1136. [ 20.179608] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1137. [ 20.193861] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1138. [ 20.201636] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1139. [ 20.209186] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1140. [ 20.216775] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1141. [ 20.224208] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1142. [ 20.236598] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1143. [ 20.251019] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1144. [ 22.260133] mmc1: error -110 whilst initialising SD card
  1145. [ 22.266034] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1146. [ 22.279649] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1147. [ 22.286459] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1148. [ 22.299641] *mmc1 lock timeout*
  1149. [ 23.400061] *mmc1 detect cd change*
  1150. [ 23.403892] *mmc1 lock*
  1151. [ 23.406580] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1152. [ 23.430142] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1153. [ 23.460893] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1154. [ 23.468388] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1155. [ 23.475339] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1156. [ 23.491935] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1157. [ 23.505987] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1158. [ 23.513514] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1159. [ 23.521066] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1160. [ 23.528599] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1161. [ 23.536020] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1162. [ 23.548061] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1163. [ 23.562540] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1164. [ 25.570062] mmc1: error -110 whilst initialising SD card
  1165. [ 25.575889] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1166. [ 25.588952] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1167. [ 25.595673] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1168. [ 25.611139] *mmc1 lock timeout*
  1169. [ 26.710080] *mmc1 detect cd change*
  1170. [ 26.714117] *mmc1 lock*
  1171. [ 26.716971] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1172. [ 26.740104] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1173. [ 26.770886] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1174. [ 26.778489] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1175. [ 26.785826] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1176. [ 26.800076] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1177. [ 26.814483] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1178. [ 26.822522] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1179. [ 26.830066] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1180. [ 26.837592] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1181. [ 26.845086] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1182. [ 26.857320] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1183. [ 26.872248] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1184. [ 28.890041] mmc1: error -110 whilst initialising SD card
  1185. [ 28.895865] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1186. [ 28.908684] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1187. [ 28.915404] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1188. [ 28.928346] *mmc1 lock timeout*
  1189. [ 30.030038] *mmc1 detect cd change*
  1190. [ 30.034097] *mmc1 lock*
  1191. [ 30.036794] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1192. [ 30.060077] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1193. [ 30.090906] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1194. [ 30.098544] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1195. [ 30.105401] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1196. [ 30.120970] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1197. [ 30.135759] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1198. [ 30.143343] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1199. [ 30.150881] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1200. [ 30.158408] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1201. [ 30.165858] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1202. [ 30.178273] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1203. [ 30.193915] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1204. [ 32.210107] mmc1: error -110 whilst initialising SD card
  1205. [ 32.216215] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1206. [ 32.229109] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1207. [ 32.236254] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1208. [ 32.249012] *mmc1 lock timeout*
  1209. [ 33.350062] *mmc1 detect cd change*
  1210. [ 33.353882] *mmc1 lock*
  1211. [ 33.356576] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1212. [ 33.380058] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1213. [ 33.410868] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1214. [ 33.418808] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1215. [ 33.425894] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1216. [ 33.440054] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1217. [ 33.454221] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1218. [ 33.461830] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1219. [ 33.469674] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1220. [ 33.477946] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1221. [ 33.485723] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1222. [ 33.497417] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1223. [ 33.511574] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1224. [ 35.520044] mmc1: error -110 whilst initialising SD card
  1225. [ 35.525975] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1226. [ 35.539920] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1227. [ 35.546792] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1228. [ 35.559300] *mmc1 lock timeout*
  1229. [ 36.660035] *mmc1 detect cd change*
  1230. [ 36.663851] *mmc1 lock*
  1231. [ 36.667140] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1232. [ 36.690058] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1233. [ 36.720855] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1234. [ 36.728572] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1235. [ 36.735528] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1236. [ 36.751186] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1237. [ 36.766458] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1238. [ 36.774017] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1239. [ 36.781537] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1240. [ 36.789391] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1241. [ 36.796811] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1242. [ 36.808923] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1243. [ 36.823271] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1244. [ 38.840305] mmc1: error -110 whilst initialising SD card
  1245. [ 38.848527] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1246. [ 38.861120] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1247. [ 38.868033] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1248. [ 38.880245] *mmc1 lock timeout*
  1249. [ 39.980022] *mmc1 detect cd change*
  1250. [ 39.984071] *mmc1 lock*
  1251. [ 39.986759] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1252. [ 40.010054] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1253. [ 40.040852] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1254. [ 40.048490] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1255. [ 40.055324] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1256. [ 40.069985] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1257. [ 40.084334] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1258. [ 40.091884] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1259. [ 40.099699] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1260. [ 40.107220] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1261. [ 40.114568] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1262. [ 40.126589] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1263. [ 40.140680] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1264. [ 42.150054] mmc1: error -110 whilst initialising SD card
  1265. [ 42.156052] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1266. [ 42.169797] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1267. [ 42.176524] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1268. [ 42.188863] *mmc1 lock timeout*
  1269. [ 43.290033] *mmc1 detect cd change*
  1270. [ 43.293849] *mmc1 lock*
  1271. [ 43.296532] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1272. [ 43.320055] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1273. [ 43.350864] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1274. [ 43.358496] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1275. [ 43.365319] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1276. [ 43.379816] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1277. [ 43.394274] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1278. [ 43.402131] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1279. [ 43.409503] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1280. [ 43.417129] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1281. [ 43.424480] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1282. [ 43.436561] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1283. [ 43.450669] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1284. [ 45.470050] mmc1: error -110 whilst initialising SD card
  1285. [ 45.476135] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1286. [ 45.490931] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1287. [ 45.497522] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1288. [ 45.510306] *mmc1 lock timeout*
  1289. [ 46.610032] *mmc1 detect cd change*
  1290. [ 46.613850] *mmc1 lock*
  1291. [ 46.616754] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1292. [ 46.640046] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1293. [ 46.670897] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1294. [ 46.678388] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1295. [ 46.685617] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1296. [ 46.699686] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1297. [ 46.714051] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1298. [ 46.721832] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1299. [ 46.729238] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1300. [ 46.736866] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1301. [ 46.744210] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1302. [ 46.756247] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1303. [ 46.770416] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1304. [ 47.590263] healthd: battery none chg=a 2017-01-10 12:22:31.556920104 UTC
  1305. [ 48.216215] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
  1306. [ 48.224312] lowmemorykiller: oom_adj 0 => oom_score_adj 0
  1307. [ 48.230336] lowmemorykiller: oom_adj 1 => oom_score_adj 58
  1308. [ 48.236446] lowmemorykiller: oom_adj 2 => oom_score_adj 117
  1309. [ 48.242747] lowmemorykiller: oom_adj 3 => oom_score_adj 176
  1310. [ 48.248948] lowmemorykiller: oom_adj 9 => oom_score_adj 529
  1311. [ 48.255192] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
  1312. [ 48.810080] mmc1: error -110 whilst initialising SD card
  1313. [ 48.816755] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1314. [ 48.832189] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1315. [ 48.838888] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1316. [ 48.851116] *mmc1 lock timeout*
  1317. [ 48.993639] acc_open
  1318. [ 48.996054] acc_release
  1319. [ 49.563304] libphy: 1c30000.eth: probed
  1320. [ 49.600254] sunxi-gmac 1c30000.eth eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (1c30000.eth-0:00)
  1321. [ 49.629483] init: Starting service 'dhcpcd_eth0'...
  1322. [ 49.950074] *mmc1 detect cd change*
  1323. [ 49.953891] *mmc1 lock*
  1324. [ 49.956575] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1325. [ 49.980248] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1326. [ 50.010848] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1327. [ 50.018731] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1328. [ 50.025536] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1329. [ 50.039782] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1330. [ 50.053872] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1331. [ 50.061491] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1332. [ 50.069042] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1333. [ 50.076577] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1334. [ 50.084254] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1335. [ 50.095951] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1336. [ 50.110548] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1337. [ 50.797784] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  1338. [ 50.808415] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  1339. [ 50.819429] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  1340. [ 52.120104] mmc1: error -110 whilst initialising SD card
  1341. [ 52.125978] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1342. [ 52.138963] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1343. [ 52.145896] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1344. [ 52.158751] *mmc1 lock timeout*
  1345. [ 53.260091] *mmc1 detect cd change*
  1346. [ 53.263944] *mmc1 lock*
  1347. [ 53.266802] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1348. [ 53.290503] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1349. [ 53.320894] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1350. [ 53.328477] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1351. [ 53.335499] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1352. [ 53.351110] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1353. [ 53.365242] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1354. [ 53.372859] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1355. [ 53.380486] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1356. [ 53.388726] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1357. [ 53.396824] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1358. [ 53.410201] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1359. [ 53.428170] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1360. [ 53.600259] libphy: 1c30000.eth-0:00 - Link is Up - 100/Full
  1361. [ 53.775140] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
  1362. [ 55.397706] init: Service 'bootanim' (pid 1755) exited with status 0
  1363. [ 55.460139] mmc1: error -110 whilst initialising SD card
  1364. [ 55.466275] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1365. [ 55.480124] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1366. [ 55.486898] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1367. [ 55.499487] *mmc1 lock timeout*
  1368. [ 55.600164] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
  1369. [ 55.613927] CPU Budget hotplug: cluster0 min:0 max:4
  1370. [ 56.600078] *mmc1 detect cd change*
  1371. [ 56.604165] *mmc1 lock*
  1372. [ 56.607057] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1373. [ 56.630097] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1374. [ 56.660893] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1375. [ 56.668827] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1376. [ 56.675736] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1377. [ 56.690641] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1378. [ 56.705419] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1379. [ 56.712956] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1380. [ 56.720501] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1381. [ 56.728114] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1382. [ 56.736643] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1383. [ 56.748959] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1384. [ 56.763497] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1385. [ 57.000606] sunxi-bt bt.29: block state already is 1
  1386. [ 57.207555] sunxi-bt bt.29: set block: 0
  1387. [ 57.212852] sunxi-bt bt.29: check bluetooth bt_power voltage: 3300000
  1388. [ 57.221784] sunxi-bt bt.29: check bluetooth io_regulator voltage: 3300000
  1389. [ 57.237416] mtp_open
  1390. [ 57.622337] CPU Budget hotplug: cluster0 min:0 max:4
  1391. [ 58.485599] [BT_LPM] bluesleep_get_uart_port: bluesleep_get_uart_port get uart_port from blusleep_uart_dev: 1c28400.uart, port irq: 33
  1392. [ 58.502085] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1393. [ 58.524968] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1394. [ 58.559531] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1395. [ 58.572083] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1396. [ 58.578951] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1397. [ 58.586242] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1398. [ 58.650687] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1399. [ 58.676737] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1400. [ 58.695751] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1401. [ 58.733793] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1402. [ 58.741359] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1403. [ 58.762947] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1404. [ 58.770233] mmc1: error -110 whilst initialising SD card
  1405. [ 58.777488] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1406. [ 58.790941] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1407. [ 58.797639] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1408. [ 58.798222] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1409. [ 58.810797] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1410. [ 58.824692] *mmc1 lock timeout*
  1411. [ 59.620202] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
  1412. [ 59.631549] CPU Budget hotplug: cluster0 min:0 max:4
  1413. [ 59.920061] *mmc1 detect cd change*
  1414. [ 59.924192] *mmc1 lock*
  1415. [ 59.926895] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1416. [ 59.950303] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1417. [ 59.980877] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1418. [ 59.988363] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1419. [ 59.995293] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1420. [ 60.009642] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1421. [ 60.023957] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1422. [ 60.031566] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1423. [ 60.039041] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1424. [ 60.046680] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1425. [ 60.054893] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1426. [ 60.067980] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1427. [ 60.082977] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1428. [ 60.132681] CPU Budget hotplug: cluster0 min:0 max:4
  1429. [ 61.928971] type=1400 audit(1484050965.391:5): avc: denied { execmod } for pid=6201 comm="m.sand.airdroid" path="/system/lib/libcutils.so" dev="mmcblk0p7" ino=1358 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
  1430. [ 62.110075] mmc1: error -110 whilst initialising SD card
  1431. [ 62.116790] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1432. [ 62.129479] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1433. [ 62.130097] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
  1434. [ 62.132292] CPU Budget hotplug: cluster0 min:0 max:4
  1435. [ 62.149106] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1436. [ 62.161762] *mmc1 lock timeout*
  1437. [ 63.260061] *mmc1 detect cd change*
  1438. [ 63.263931] *mmc1 lock*
  1439. [ 63.266715] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1440. [ 63.290075] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1441. [ 63.320886] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1442. [ 63.328384] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1443. [ 63.335341] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1444. [ 63.350070] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1445. [ 63.363957] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1446. [ 63.371524] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1447. [ 63.378927] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1448. [ 63.386566] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1449. [ 63.393961] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1450. [ 63.406080] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1451. [ 63.420797] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1452. [ 65.430106] mmc1: error -110 whilst initialising SD card
  1453. [ 65.436395] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1454. [ 65.449712] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1455. [ 65.456516] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1456. [ 65.469138] *mmc1 lock timeout*
  1457. [ 66.570105] *mmc1 detect cd change*
  1458. [ 66.573929] *mmc1 lock*
  1459. [ 66.576617] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1460. [ 66.600108] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1461. [ 66.630951] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1462. [ 66.638513] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1463. [ 66.645430] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1464. [ 66.660083] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1465. [ 66.674486] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1466. [ 66.682056] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1467. [ 66.689536] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1468. [ 66.697263] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1469. [ 66.705260] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1470. [ 66.717504] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1471. [ 66.731683] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1472. [ 67.086290] type=1400 audit(1484050970.551:6): avc: denied { execmod } for pid=6568 comm="d.airdroid:push" path="/system/lib/libcutils.so" dev="mmcblk0p7" ino=1358 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:system_file:s0 tclass=file permissive=0
  1473. [ 68.520052] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired
  1474. [ 68.526646] [BT_LPM] bluesleep_tx_timer_expire: Tx data during last period
  1475. [ 68.760108] mmc1: error -110 whilst initialising SD card
  1476. [ 68.766333] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1477. [ 68.779278] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1478. [ 68.786176] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1479. [ 68.799152] *mmc1 lock timeout*
  1480. [ 69.900455] *mmc1 detect cd change*
  1481. [ 69.904308] *mmc1 lock*
  1482. [ 69.907018] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1483. [ 69.940104] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1484. [ 69.971111] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1485. [ 69.978888] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1486. [ 69.987008] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1487. [ 70.001948] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1488. [ 70.017484] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1489. [ 70.025292] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1490. [ 70.033224] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1491. [ 70.040884] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1492. [ 70.048543] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1493. [ 70.061578] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1494. [ 70.076061] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1495. [ 70.731240] healthd: battery none chg=a 2017-01-10 12:22:54.211714007 UTC
  1496. [ 72.090068] mmc1: error -110 whilst initialising SD card
  1497. [ 72.095894] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1498. [ 72.109115] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1499. [ 72.115852] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1500. [ 72.128983] *mmc1 lock timeout*
  1501. [ 73.230073] *mmc1 detect cd change*
  1502. [ 73.234303] *mmc1 lock*
  1503. [ 73.237064] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1504. [ 73.260930] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1505. [ 73.290912] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1506. [ 73.298503] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1507. [ 73.305472] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1508. [ 73.320505] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1509. [ 73.335481] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1510. [ 73.343199] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1511. [ 73.350921] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1512. [ 73.358477] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1513. [ 73.366335] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1514. [ 73.378668] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1515. [ 73.393002] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1516. [ 73.585940] CPU Budget hotplug: cluster0 min:0 max:4
  1517. [ 73.592255] CPU Budget:update CPU 0 cpufreq max to 1104000 min to 480000
  1518. [ 75.400067] mmc1: error -110 whilst initialising SD card
  1519. [ 75.405912] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1520. [ 75.419913] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1521. [ 75.426880] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1522. [ 75.439399] *mmc1 lock timeout*
  1523. [ 75.581582] CPU2: shutdown
  1524. [ 75.585059] psci: CPU2 killed.
  1525. [ 75.591022] CPU2: Booted secondary processor
  1526. [ 75.591022] CPU2: update cpu_power 1968128
  1527. [ 76.540098] *mmc1 detect cd change*
  1528. [ 76.544256] *mmc1 lock*
  1529. [ 76.547148] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1530. [ 76.570199] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1531. [ 76.601312] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1532. [ 76.608947] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1533. [ 76.616123] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1534. [ 76.633213] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1535. [ 76.648940] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1536. [ 76.657067] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1537. [ 76.666957] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1538. [ 76.675029] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1539. [ 76.683048] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1540. [ 76.696268] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1541. [ 76.711132] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1542. [ 78.560058] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired
  1543. [ 78.566647] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle
  1544. [ 78.573937] [BT_LPM] bluesleep_sleep_work: going to sleep...
  1545. [ 78.740090] mmc1: error -110 whilst initialising SD card
  1546. [ 78.746126] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1547. [ 78.759642] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 1, RTO !!
  1548. [ 78.766648] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  1549. [ 78.779559] *mmc1 lock timeout*
  1550. [ 79.880145] *mmc1 detect cd change*
  1551. [ 79.884255] *mmc1 lock*
  1552. [ 79.887287] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  1553. [ 79.910179] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1554. [ 79.940957] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1555. [ 79.948607] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 52, RTO !!
  1556. [ 79.955778] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1557. [ 79.971585] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  1558. [ 79.986641] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1559. [ 79.994527] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1560. [ 80.002191] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1561. [ 80.009682] sunxi-mmc 1c0f000.sdmmc: smc 1 p0 err, cmd 5, RTO !!
  1562. [ 80.020448] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1563. [ 80.033673] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1564. [ 80.048875] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  1565.  
  1566. Thanks for using picocom
  1567. jonsmirl@ubuntu-16:~$
RAW Paste Data