Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00117
- S - IMAGE_VARIANT_STRING=DAABANAZA
- S - OEM_IMAGE_VERSION_STRING=CRM
- S - Boot Config, 0x00000020
- S - Reset status Config, 0x00000000
- S - Core 0 Frequency, 0 MHz
- B - 261 - PBL, Start
- B - 1338 - bootable_media_detect_entry, Start
- B - 1678 - bootable_media_detect_success, Start
- B - 1692 - elf_loader_entry, Start
- B - 5068 - auth_hash_seg_entry, Start
- B - 7212 - auth_hash_seg_exit, Start
- B - 578936 - elf_segs_hash_verify_entry, Start
- B - 696977 - PBL, End
- B - 697001 - SBL1, Start
- B - 787732 - pm_device_init, Start
- D - 7 - pm_device_init, Delta
- B - 789258 - boot_flash_init, Start
- D - 54233 - boot_flash_init, Delta
- B - 847636 - boot_config_data_table_init, Start
- D - 3839 - boot_config_data_table_init, Delta - (419 Bytes)
- B - 854846 - clock_init, Start
- D - 7587 - clock_init, Delta
- B - 866935 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:16
- B - 870463 - sbl1_ddr_set_params, Start
- B - 875452 - cpr_init, Start
- D - 2 - cpr_init, Delta
- B - 879892 - Pre_DDR_clock_init, Start
- D - 5 - Pre_DDR_clock_init, Delta
- D - 13232 - sbl1_ddr_set_params, Delta
- B - 893626 - pm_driver_init, Start
- D - 2 - pm_driver_init, Delta
- B - 963823 - sbl1_wait_for_ddr_training, Start
- D - 29 - sbl1_wait_for_ddr_training, Delta
- B - 979351 - Image Load, Start
- D - 140787 - QSEE Image Loaded, Delta - (274048 Bytes)
- B - 1120564 - Image Load, Start
- D - 1440 - SEC Image Loaded, Delta - (2048 Bytes)
- B - 1130969 - Image Load, Start
- D - 217122 - APPSBL Image Loaded, Delta - (444151 Bytes)
- B - 1348489 - QSEE Execution, Start
- D - 60 - QSEE Execution, Delta
- B - 1354705 - SBL1, End
- D - 659782 - SBL1, Delta
- S - Flash Throughput, 2006 KB/s (720666 Bytes, 359166 us)
- S - DDR Frequency, 537 MHz
- U-Boot 2012.07 [ALFA Network Inc. SmartBS v2.0dk,r2767] (Nov 30 2020 - 17:28:54)
- smem ram ptable found: ver: 1 len: 3
- DRAM: 256 MiB
- NAND: spi_nand SF NAND ID 00:c2:12:c2
- FLASH: 144 MiB
- machid: 9000010
- FlashType: 0
- eth0: 00:c0:ca:a5:f7:c3
- eth1: 00:c0:ca:a5:f7:c4
- wifi0: 00:c0:ca:a5:f7:c5
- wifi1: 00:c0:ca:a5:f7:c6
- bt: ff:ff:ff:ff:ff:ff
- Net:
- MAC0 addr:00:C0:CA:A5:F7:C3
- PHY ID1: 0x4d
- PHY ID2: 0xd0b1
- eth0
- Hit any key to stop booting: 2 1 0
- Creating 1 MTD partitions on "nand1":
- 0x000004000000-0x000008000000 : "mtd=1"
- UBI: attaching mtd2 to ubi0
- UBI: physical eraseblock size: 131072 bytes (128 KiB)
- UBI: logical eraseblock size: 126976 bytes
- UBI: smallest flash I/O unit: 2048
- UBI: VID header offset: 2048 (aligned 2048)
- UBI: data offset: 4096
- UBI: empty MTD device detected
- UBI: create volume table (copy #1)
- UBI: create volume table (copy #2)
- UBI: attached mtd2 to ubi0
- UBI: MTD device name: "mtd=1"
- UBI: MTD device size: 64 MiB
- UBI: number of good PEBs: 512
- UBI: number of bad PEBs: 0
- UBI: max. allowed volumes: 128
- UBI: wear-leveling threshold: 4096
- UBI: number of internal volumes: 1
- UBI: number of user volumes: 0
- UBI: available PEBs: 488
- UBI: total number of reserved PEBs: 24
- UBI: number of PEBs reserved for bad PEB handling: 20
- UBI: max/mean erase counter: 1/0
- Volume kernel not found!
- Not found valid kernel, switch to secondary part
- UBI: mtd2 is detached from ubi0
- Creating 1 MTD partitions on "nand1":
- 0x000000000000-0x000004000000 : "mtd=0"
- UBI: attaching mtd2 to ubi0
- UBI: physical eraseblock size: 131072 bytes (128 KiB)
- UBI: logical eraseblock size: 126976 bytes
- UBI: smallest flash I/O unit: 2048
- UBI: VID header offset: 2048 (aligned 2048)
- UBI: data offset: 4096
- UBI: volume 2 ("rootfs_data") re-sized from 1 to 326 LEBs
- UBI: attached mtd2 to ubi0
- UBI: MTD device name: "mtd=0"
- UBI: MTD device size: 64 MiB
- UBI: number of good PEBs: 512
- UBI: number of bad PEBs: 0
- UBI: max. allowed volumes: 128
- UBI: wear-leveling threshold: 4096
- UBI: number of internal volumes: 1
- UBI: number of user volumes: 3
- UBI: available PEBs: 0
- UBI: total number of reserved PEBs: 512
- UBI: number of PEBs reserved for bad PEB handling: 20
- UBI: max/mean erase counter: 1/0
- Read 0 bytes from volume kernel to 84000000
- No size specified -> Using max size (3428352)
- ## Booting kernel from FIT Image at 84000000 ...
- Using 'config@1' configuration
- Trying 'kernel@1' kernel subimage
- Description: ARM OpenWrt Linux-3.14.77
- Type: Kernel Image
- Compression: gzip compressed
- Data Start: 0x840000e4
- Data Size: 3331249 Bytes = 3.2 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x80208000
- Entry Point: 0x80208000
- Hash algo: crc32
- Hash value: 64efb39b
- Hash algo: sha1
- Hash value: 80f412d32028529ba7ba48f37810824f8400d87a
- Verifying Hash Integrity ... OK
- ## Flattened Device Tree from FIT Image at 84000000
- Using 'config@1' configuration
- Trying 'fdt@1' FDT blob subimage
- Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x8432d6d8
- Data Size: 34731 Bytes = 33.9 KiB
- Architecture: ARM
- Hash algo: crc32
- Hash value: d948cab7
- Hash algo: sha1
- Hash value: 2269897858c18de7a1d12a274c371e2ebc682e81
- Verifying Hash Integrity ... OK
- Booting using the fdt blob at 0x8432d6d8
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 86ff4000, end 86fff7aa ... OK
- Using machid 0x9000010 from environment
- Enable QCOM Watchdog
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.14.77 (minglin@localhost) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 r2740) ) #63 SMP PREEMPT Wed Dec 2 15:18:31 CST 2020
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP120C-AC
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @cfdca000 s7936 r8192 d12544 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60928
- [ 0.000000] Kernel command line: ubi.mtd=rootfs2 rootwait ubi.mtd=rootfs2 rootwait clk_ignore_unused
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 235928K/245760K available (4601K kernel code, 377K rwdata, 1568K rodata, 171K init, 603K bss, 9832K reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0208000 - 0xc080e9f0 (6171 kB)
- [ 0.000000] .init : 0xc080f000 - 0xc0839f00 ( 172 kB)
- [ 0.000000] .data : 0xc083a000 - 0xc08987c8 ( 378 kB)
- [ 0.000000] .bss : 0xc08987c8 - 0xc092f5d0 ( 604 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 timer(s) running at 48.00MHz (virt).
- [ 0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns
- [ 0.000018] Switching to timer-based delay loop
- [ 0.000301] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
- [ 0.000319] pid_max: default: 32768 minimum: 301
- [ 0.000591] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000605] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.011050] CPU: Testing write buffer coherency: ok
- [ 0.011434] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.011508] Setting up static identity map for 0x802120b0 - 0x80212108
- [ 0.090631] CPU1: Booted secondary processor
- [ 0.090678] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.110613] CPU2: Booted secondary processor
- [ 0.110649] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.130672] CPU3: Booted secondary processor
- [ 0.130708] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.130839] Brought up 4 CPUs
- [ 0.130879] SMP: Total of 4 processors activated (384.00 BogoMIPS).
- [ 0.130886] CPU: All CPU(s) started in SVC mode.
- [ 0.141208] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.141573] pinctrl core: initialized pinctrl subsystem
- [ 0.142018] regulator-dummy: no parameters
- [ 0.142714] NET: Registered protocol family 16
- [ 0.144262] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.144822] cpuidle: using governor ladder
- [ 0.144834] cpuidle: using governor menu
- [ 0.152897] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2
- [ 0.152904] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3
- [ 0.152911] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
- [ 0.152915] hw-breakpoint: CPU 3 failed to disable vector catch
- [ 0.152946] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
- [ 0.153034]
- [ 0.153034] Version Rollback Feature Disabled
- [ 0.156503] sps:sps is ready.
- [ 0.161338] bio: create slab <bio-0> at 0
- [ 0.163169] SCSI subsystem initialized
- [ 0.163853] msm_bus_fabric_init_driver
- [ 0.164041] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.164058] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.164077] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
- [ 0.164122] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.164137] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.164153] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
- [ 0.189099] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.190076] Switched to clocksource arch_sys_counter
- [ 0.191910] NET: Registered protocol family 2
- [ 0.193253] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.193302] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.193351] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.193407] TCP: reno registered
- [ 0.193424] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.193456] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.193817] NET: Registered protocol family 1
- [ 0.194519] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- [ 0.195846] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.205272] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.205288] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.206207] msgmni has been set to 460
- [ 0.207622] Key type asymmetric registered
- [ 0.207637] Asymmetric key parser 'x509' registered
- [ 0.207676] io scheduler noop registered
- [ 0.207687] io scheduler deadline registered (default)
- [ 0.208920] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
- [ 0.208984] tcsr 1953000.ess_tcsr: setting ess interface select = 0
- [ 0.209052] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
- [ 0.209108] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
- [ 0.209767] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.210953] msm_serial_hsl_probe: detected port #0 (ttyMSM0)
- [ 0.210990] msm_serial_hsl_probe: Bus scaling is disabled
- [ 0.211166] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM
- [ 0.211240] msm_hsl_console_setup: console setup on port #0
- [ 0.801304] console [ttyMSM0] enabled
- [ 0.805381] msm_serial_hsl_init: driver initialized
- [ 0.810239] msm_serial_hs module loaded
- [ 0.813952] qca_serial_hs module loaded
- [ 0.819941] sps: BAM device 0x07884000 is not registered yet.
- [ 0.824714] sps:BAM 0x07884000 is registered.
- [ 0.830144] sps:BAM 0x07884000 (va:0xd0b40000) enabled: ver:0x19, number of pipes:12
- [ 0.837291] m25p80 spi0.0: found mx25l12805d, expected n25q128a11
- [ 0.843133] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
- [ 0.848178] 10 ofpart partitions found on MTD device spi0.0
- [ 0.853704] Creating 10 MTD partitions on "spi0.0":
- [ 0.858555] 0x000000000000-0x000000040000 : "0:SBL1"
- [ 0.864670] 0x000000040000-0x000000060000 : "0:MIBIB"
- [ 0.869726] 0x000000060000-0x0000000c0000 : "0:QSEE"
- [ 0.874761] 0x0000000c0000-0x0000000d0000 : "0:CDT"
- [ 0.879540] 0x0000000d0000-0x0000000e0000 : "0:DDRPARAMS"
- [ 0.884962] 0x0000000e0000-0x0000000f0000 : "0:APPSBLENV"
- [ 0.890356] 0x0000000f0000-0x000000170000 : "0:APPSBL"
- [ 0.895446] 0x000000170000-0x000000180000 : "0:ART"
- [ 0.900377] 0x000000180000-0x000000190000 : "PDATA1"
- [ 0.905204] 0x000000190000-0x0000001a0000 : "PDATA2"
- [ 0.922001] libphy: ipq40xx_mdio: probed
- [ 0.928447] ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered
- [ 0.934113] i2c /dev entries driver
- [ 0.939456] sdhci: Secure Digital Host Controller Interface driver
- [ 0.944633] sdhci: Copyright(c) Pierre Ossman
- [ 0.948941] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.960114] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0x12
- [ 0.965433] nand: Macronix MX35LFxGE4AB 128MiB 3.3V
- [ 0.970317] nand: 128MiB, SLC, page size: 2048, OOB size: 64
- [ 0.975950] Scanning device for bad blocks
- [ 1.689746] random: nonblocking pool is initialized
- [ 2.923746] 2 ofpart partitions found on MTD device spi0.1
- [ 2.928197] Creating 2 MTD partitions on "spi0.1":
- [ 2.933020] 0x000000000000-0x000004000000 : "rootfs1"
- [ 2.939151] 0x000004000000-0x000008000000 : "rootfs2"
- [ 2.947069] TCP: cubic registered
- [ 2.950007] NET: Registered protocol family 10
- [ 2.954918] NET: Registered protocol family 17
- [ 2.958433] Bridge firewalling registered
- [ 2.962374] 8021q: 802.1Q VLAN Support v1.8
- [ 2.966603] Registering SWP/SWPB emulation handler
- [ 2.972406] regulator-dummy: disabling
- [ 2.975570] UBI: attaching mtd11 to ubi0
- [ 6.447354] UBI: scanning is finished
- [ 6.526920] UBI: attached mtd11 (name "rootfs2", size 64 MiB) to ubi0
- [ 6.532365] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 6.539099] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 6.545801] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 6.552654] UBI: good PEBs: 512, bad PEBs: 0, corrupted PEBs: 0
- [ 6.558545] UBI: user volume: 0, internal volumes: 1, max. volumes count: 128
- [ 6.565678] UBI: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 0
- [ 6.573923] UBI: available PEBs: 488, total reserved PEBs: 24, PEBs reserved for bad PEB handling: 20
- [ 6.583144] UBI error: ubi_attach_mtd_dev: mtd11 is already attached to ubi0
- [ 6.583151] UBI: background thread "ubi_bgt0d" started, PID 72
- [ 6.595975] UBI error: ubi_init: cannot attach mtd11
- [ 6.600924] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 6.610833] clk: Not disabling unused clocks
- [ 6.614072] ALSA device list:
- [ 6.617021] No soundcards found.
- [ 6.620800] 6Waiting for root device ...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement