SHARE
TWEET

Untitled

a guest Mar 5th, 2013 127 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. root@xbian:~# lsusb
  2. Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
  3. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  4. Bus 001 Device 008: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. JM20329 SATA Bridge
  5. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
  6. Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
  7. Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
  8. Bus 001 Device 006: ID 0bc7:0006 X10 Wireless Technology, Inc. Wireless Transceiver (ACPI-compliant)
  9. Bus 001 Device 007: ID 046d:c52b Logitech, Inc. Unifying Receiver
  10.  
  11. root@xbian:~# lsusb -v -d 0bc7:0006
  12.  
  13. Bus 001 Device 006: ID 0bc7:0006 X10 Wireless Technology, Inc. Wireless Transceiver (ACPI-compliant)
  14. Device Descriptor:
  15.   bLength                18
  16.   bDescriptorType         1
  17.   bcdUSB               1.10
  18.   bDeviceClass            0 (Defined at Interface level)
  19.   bDeviceSubClass         0
  20.   bDeviceProtocol         0
  21.   bMaxPacketSize0         8
  22.   idVendor           0x0bc7 X10 Wireless Technology, Inc.
  23.   idProduct          0x0006 Wireless Transceiver (ACPI-compliant)
  24.   bcdDevice            1.00
  25.   iManufacturer           1 X10 WTI
  26.   iProduct                2 RF receiver
  27.   iSerial                 0
  28.   bNumConfigurations      1
  29.   Configuration Descriptor:
  30.     bLength                 9
  31.     bDescriptorType         2
  32.     wTotalLength           32
  33.     bNumInterfaces          1
  34.     bConfigurationValue     1
  35.     iConfiguration          0
  36.     bmAttributes         0xa0
  37.       (Bus Powered)
  38.       Remote Wakeup
  39.     MaxPower                2mA
  40.     Interface Descriptor:
  41.       bLength                 9
  42.       bDescriptorType         4
  43.       bInterfaceNumber        0
  44.       bAlternateSetting       0
  45.       bNumEndpoints           2
  46.       bInterfaceClass       255 Vendor Specific Class
  47.       bInterfaceSubClass      0
  48.       bInterfaceProtocol      0
  49.       iInterface              0
  50.       Endpoint Descriptor:
  51.         bLength                 7
  52.         bDescriptorType         5
  53.         bEndpointAddress     0x81  EP 1 IN
  54.         bmAttributes            3
  55.           Transfer Type            Interrupt
  56.           Synch Type               None
  57.           Usage Type               Data
  58.         wMaxPacketSize     0x0008  1x 8 bytes
  59.         bInterval              10
  60.       Endpoint Descriptor:
  61.         bLength                 7
  62.         bDescriptorType         5
  63.         bEndpointAddress     0x02  EP 2 OUT
  64.         bmAttributes            3
  65.           Transfer Type            Interrupt
  66.           Synch Type               None
  67.           Usage Type               Data
  68.         wMaxPacketSize     0x0008  1x 8 bytes
  69.         bInterval              10
  70. Device Status:     0x0000
  71.   (Bus Powered)
  72.  
  73.  
  74. root@xbian:~# dmesg
  75. [    0.000000] Booting Linux on physical CPU 0
  76. [    0.000000] Initializing cgroup subsys cpu
  77. [    0.000000] Linux version 3.6.11+ (root@xbian) (gcc version 4.7.3 20121001 (prerelease) (crosstool-NG 1.17.0) ) #3 PREEMPT Tue Jan 8 22:27:29 CET 2013
  78. [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  79. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  80. [    0.000000] Machine: BCM2708
  81. [    0.000000] Memory policy: ECC disabled, Data cache writeback
  82. [    0.000000] On node 0 totalpages: 98304
  83. [    0.000000] free_area_init_node: node 0, pgdat c056f670, node_mem_map c0619000
  84. [    0.000000]   Normal zone: 768 pages used for memmap
  85. [    0.000000]   Normal zone: 0 pages reserved
  86. [    0.000000]   Normal zone: 97536 pages, LIFO batch:31
  87. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  88. [    0.000000] pcpu-alloc: [0] 0
  89. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
  90. [    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=624 bcm2708.boardrev=0xf bcm2708.serial=0x1e01365f smsc95xx.macaddr=B8:27:EB:01:36:5F sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty2 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait logo.nologo quiet loglevel=0 splash
  91. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  92. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  93. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  94. [    0.000000] allocated 786432 bytes of page_cgroup
  95. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  96. [    0.000000] Memory: 384MB = 384MB total
  97. [    0.000000] Memory: 380688k/380688k available, 12528k reserved, 0K highmem
  98. [    0.000000] Virtual kernel memory layout:
  99. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  100. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  101. [    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
  102. [    0.000000]     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
  103. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  104. [    0.000000]       .text : 0xc0008000 - 0xc05148fc   (5171 kB)
  105. [    0.000000]       .init : 0xc0515000 - 0xc0539dac   ( 148 kB)
  106. [    0.000000]       .data : 0xc053a000 - 0xc05701a0   ( 217 kB)
  107. [    0.000000]        .bss : 0xc05701c4 - 0xc06186cc   ( 674 kB)
  108. [    0.000000] NR_IRQS:330
  109. [    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  110. [    0.000000] Console: colour dummy device 80x30
  111. [    0.000000] console [tty2] enabled
  112. [    0.000388] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432)
  113. [    0.060050] pid_max: default: 32768 minimum: 301
  114. [    0.060384] Mount-cache hash table entries: 512
  115. [    0.061141] Initializing cgroup subsys cpuacct
  116. [    0.061168] Initializing cgroup subsys memory
  117. [    0.061226] Initializing cgroup subsys devices
  118. [    0.061240] Initializing cgroup subsys freezer
  119. [    0.061251] Initializing cgroup subsys blkio
  120. [    0.061332] CPU: Testing write buffer coherency: ok
  121. [    0.061651] hw perfevents: enabled with v6 PMU driver, 3 counters available
  122. [    0.061756] Setting up static identity map for 0x3b3ad8 - 0x3b3b34
  123. [    0.063300] devtmpfs: initialized
  124. [    0.072260] NET: Registered protocol family 16
  125. [    0.077197] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  126. [    0.078334] bcm2708.uart_clock = 0
  127. [    0.079787] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  128. [    0.079806] hw-breakpoint: maximum watchpoint size is 4 bytes.
  129. [    0.079819] mailbox: Broadcom VideoCore Mailbox driver
  130. [    0.079892] bcm2708_vcio: mailbox at f200b880
  131. [    0.079975] bcm_power: Broadcom power driver
  132. [    0.079993] bcm_power_open() -> 0
  133. [    0.080004] bcm_power_request(0, 8)
  134. [    0.580688] bcm_mailbox_read -> 00000080, 0
  135. [    0.580705] bcm_power_request -> 0
  136. [    0.580715] Serial: AMBA PL011 UART driver
  137. [    0.580848] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  138. [    0.601192] bio: create slab <bio-0> at 0
  139. [    0.602070] SCSI subsystem initialized
  140. [    0.602292] usbcore: registered new interface driver usbfs
  141. [    0.602399] usbcore: registered new interface driver hub
  142. [    0.602663] usbcore: registered new device driver usb
  143. [    0.604089] Switching to clocksource stc
  144. [    0.604325] FS-Cache: Loaded
  145. [    0.604594] CacheFiles: Loaded
  146. [    0.617608] NET: Registered protocol family 2
  147. [    0.618445] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  148. [    0.618887] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  149. [    0.619143] TCP: Hash tables configured (established 16384 bind 16384)
  150. [    0.619189] TCP: reno registered
  151. [    0.619210] UDP hash table entries: 256 (order: 0, 4096 bytes)
  152. [    0.619241] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  153. [    0.619517] NET: Registered protocol family 1
  154. [    0.620151] RPC: Registered named UNIX socket transport module.
  155. [    0.620176] RPC: Registered udp transport module.
  156. [    0.620186] RPC: Registered tcp transport module.
  157. [    0.620195] RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. [    0.620497] Trying to unpack rootfs image as initramfs...
  159. [    0.857104] Freeing initrd memory: 1988K
  160. [    0.857774] bcm2708_dma: DMA manager at f2007000
  161. [    0.857878] bcm2708_gpio: bcm2708_gpio_probe c0547e68
  162. [    0.858276] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  163. [    0.859272] audit: initializing netlink socket (disabled)
  164. [    0.859341] type=2000 audit(0.850:1): initialized
  165. [    0.980099] VFS: Disk quotas dquot_6.5.2
  166. [    0.980188] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  167. [    0.980607] FS-Cache: Netfs 'nfs' registered for caching
  168. [    0.980988] NFS: Registering the id_resolver key type
  169. [    0.981153] Key type id_resolver registered
  170. [    0.981169] Key type id_legacy registered
  171. [    0.981526] msgmni has been set to 747
  172. [    0.983634] io scheduler noop registered
  173. [    0.983657] io scheduler deadline registered
  174. [    0.983690] io scheduler cfq registered (default)
  175. [    0.989112] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
  176. [    0.989134] crc32: self tests passed, processed 225944 bytes in 2578000 nsec
  177. [    0.991050] crc32c: CRC_LE_BITS = 64
  178. [    0.991062] crc32c: self tests passed, processed 225944 bytes in 927000 nsec
  179. [    1.010883] Console: switching to colour frame buffer device 148x39
  180. [    1.029808] brd: module loaded
  181. [    1.035067] loop: module loaded
  182. [    1.035448] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
  183. [    1.036739] usbcore: registered new interface driver smsc95xx
  184. [    1.036909] usbcore: registered new interface driver cdc_ncm
  185. [    1.036934] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  186. [    1.242121] Core Release: 2.80a
  187. [    1.242151] Setting default values for core params
  188. [    1.242205] Finished setting default values for core params
  189. [    1.447315] Using Buffer DMA mode
  190. [    1.447339] Periodic Transfer Interrupt Enhancement - disabled
  191. [    1.447350] Multiprocessor Interrupt Enhancement - disabled
  192. [    1.447363] OTG VER PARAM: 0, OTG VER FLAG: 0
  193. [    1.447380] Dedicated Tx FIFOs mode
  194. [    1.447598] dwc_otg: Microframe scheduler enabled
  195. [    1.447654] dwc_otg bcm2708_usb: DWC OTG Controller
  196. [    1.447713] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  197. [    1.447780] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  198. [    1.447853] Init: Port Power? op_state=1
  199. [    1.447863] Init: Power Port (0)
  200. [    1.447990] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  201. [    1.448015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  202. [    1.448032] usb usb1: Product: DWC OTG Controller
  203. [    1.448048] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
  204. [    1.448063] usb usb1: SerialNumber: bcm2708_usb
  205. [    1.448872] hub 1-0:1.0: USB hub found
  206. [    1.448920] hub 1-0:1.0: 1 port detected
  207. [    1.449278] dwc_otg: FIQ enabled
  208. [    1.449294] dwc_otg: NAK holdoff enabled
  209. [    1.449316] Module dwc_common_port init
  210. [    1.449554] Initializing USB Mass Storage driver...
  211. [    1.449770] usbcore: registered new interface driver usb-storage
  212. [    1.449785] USB Mass Storage support registered.
  213. [    1.449929] usbcore: registered new interface driver libusual
  214. [    1.450231] mousedev: PS/2 mouse device common for all mice
  215. [    1.450879] bcm2835-cpufreq: min=700000 max=700000 cur=700000
  216. [    1.451011] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq: switching to governor performance
  217. [    1.451053] cpuidle: using governor ladder
  218. [    1.451067] cpuidle: using governor menu
  219. [    1.451141] sdhci: Secure Digital Host Controller Interface driver
  220. [    1.451152] sdhci: Copyright(c) Pierre Ossman
  221. [    1.451250] sdhci: Enable low-latency mode
  222. [    1.451529] Registered led device: mmc0::
  223. [    1.494361] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  224. [    1.494431] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  225. [    1.494513] sdhci-pltfm: SDHCI platform and OF driver helper
  226. [    1.494871] usbcore: registered new interface driver usbhid
  227. [    1.494887] usbhid: USB HID core driver
  228. [    1.495855] TCP: cubic registered
  229. [    1.495877] Initializing XFRM netlink socket
  230. [    1.495927] NET: Registered protocol family 17
  231. [    1.496093] Key type dns_resolver registered
  232. [    1.496590] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  233. [    1.499691] registered taskstats version 1
  234. [    1.505489] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  235. [    1.513469] Freeing init memory: 144K
  236. [    1.566130] mmc0: could read SD Status register (SSR) at the 2th attempt
  237. [    1.573963] mmc0: new high speed SDHC card at address e624
  238. [    1.584403] mmcblk0: mmc0:e624 SU04G 3.69 GiB
  239. [    1.587683]  mmcblk0: p1 p2
  240. [    1.644374] Indeed it is in host mode hprt0 = 00021501
  241. [    1.884329] usb 1-1: new high-speed USB device number 2 using dwc_otg
  242. [    1.884498] Indeed it is in host mode hprt0 = 00001101
  243. [    2.174660] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  244. [    2.174694] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  245. [    2.175499] hub 1-1:1.0: USB hub found
  246. [    2.175655] hub 1-1:1.0: 3 ports detected
  247. [    2.380802] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  248. [    2.454534] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  249. [    2.554914] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  250. [    2.554948] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  251. [    2.558006] smsc95xx v1.0.4
  252. [    2.619341] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:01:36:5f
  253. [    2.714416] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  254. [    2.816464] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
  255. [    2.816499] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  256. [    2.816517] usb 1-1.3: Product: USB2.0 Hub
  257. [    2.817760] hub 1-1.3:1.0: USB hub found
  258. [    2.818331] hub 1-1.3:1.0: 4 ports detected
  259. [    3.094554] usb 1-1.3.2: new high-speed USB device number 5 using dwc_otg
  260. [    3.196242] usb 1-1.3.2: New USB device found, idVendor=05e3, idProduct=0608
  261. [    3.196273] usb 1-1.3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  262. [    3.196292] usb 1-1.3.2: Product: USB2.0 Hub
  263. [    3.197429] hub 1-1.3.2:1.0: USB hub found
  264. [    3.197866] hub 1-1.3.2:1.0: 4 ports detected
  265. [    3.274564] usb 1-1.3.3: new low-speed USB device number 6 using dwc_otg
  266. [    3.379795] usb 1-1.3.3: New USB device found, idVendor=0bc7, idProduct=0006
  267. [    3.379826] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  268. [    3.379844] usb 1-1.3.3: Product: RF receiver
  269. [    3.379860] usb 1-1.3.3: Manufacturer: X10 WTI
  270. [    3.454598] usb 1-1.3.4: new full-speed USB device number 7 using dwc_otg
  271. [    3.557890] usb 1-1.3.4: New USB device found, idVendor=046d, idProduct=c52b
  272. [    3.557923] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  273. [    3.557942] usb 1-1.3.4: Product: USB Receiver
  274. [    3.557958] usb 1-1.3.4: Manufacturer: Logitech
  275. [    3.644616] usb 1-1.3.2.1: new high-speed USB device number 8 using dwc_otg
  276. [    3.745980] usb 1-1.3.2.1: New USB device found, idVendor=152d, idProduct=2329
  277. [    3.746012] usb 1-1.3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  278. [    3.746031] usb 1-1.3.2.1: Product: USB to ATA/ATAPI bridge
  279. [    3.746049] usb 1-1.3.2.1: Manufacturer: JMicron
  280. [    3.746065] usb 1-1.3.2.1: SerialNumber: 322949FB5009
  281. [    3.747781] usb-storage 1-1.3.2.1:1.0: Quirks match for vid 152d pid 2329: 8020
  282. [    3.747952] scsi0 : usb-storage 1-1.3.2.1:1.0
  283. [    4.766760] scsi 0:0:0:0: Direct-Access     SAMSUNG  HM750LI          2AM1 PQ: 0 ANSI: 2 CCS
  284. [    4.768874] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  285. [    4.769758] sd 0:0:0:0: [sda] Write Protect is off
  286. [    4.769797] sd 0:0:0:0: [sda] Mode Sense: 28 00 00 00
  287. [    4.770722] sd 0:0:0:0: [sda] No Caching mode page present
  288. [    4.770754] sd 0:0:0:0: [sda] Assuming drive cache: write through
  289. [    4.773980] sd 0:0:0:0: [sda] No Caching mode page present
  290. [    4.774016] sd 0:0:0:0: [sda] Assuming drive cache: write through
  291. [    5.109823]  sda: sda1
  292. [    5.115909] sd 0:0:0:0: [sda] No Caching mode page present
  293. [    5.115946] sd 0:0:0:0: [sda] Assuming drive cache: write through
  294. [    5.115967] sd 0:0:0:0: [sda] Attached SCSI disk
  295. [    6.536776] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-bcm2708_usb-1.3.4/input2
  296. [    6.551080] input: Logitech Unifying Device. Wireless PID:4024 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.2/0003:046D:C52B.0003/input/input0
  297. [    6.557439] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-bcm2708_usb-1.3.4:1
  298. [    9.464625] fuse init (API version 7.20)
  299. [   13.001691] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  300. [   13.643556] bcm2835 ALSA card created!
  301. [   13.643852] bcm2835 ALSA chip created!
  302. [   13.644042] bcm2835 ALSA chip created!
  303. [   13.644317] bcm2835 ALSA chip created!
  304. [   13.644533] bcm2835 ALSA chip created!
  305. [   13.644723] bcm2835 ALSA chip created!
  306. [   13.644910] bcm2835 ALSA chip created!
  307. [   13.646566] bcm2835 ALSA chip created!
  308. [   13.754792] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
  309. [   18.338869] Adding 127996k swap on /var/swapfile.  Priority:-1 extents:3 across:160764k SS
  310. [   23.311512] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  311. [   23.330115] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  312. [   32.431913] watchdog stopped
  313.  
  314.  
  315. root@xbian:~# cat /proc/bus/input/devices
  316. I: Bus=0003 Vendor=046d Product=c52b Version=0111
  317. N: Name="Logitech Unifying Device. Wireless PID:4024"
  318. P: Phys=usb-bcm2708_usb-1.3.4:1
  319. S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.2/0003:046D:C52B.0003/input/input0
  320. U: Uniq=
  321. H: Handlers=sysrq kbd mouse0 event0
  322. B: PROP=0
  323. B: EV=12001f
  324. B: KEY=4837fff 72ff32d bf544446 0 0 ffff0001 30f90 8b17c007 ffff7bfa d9415fff febeffdf ffefffff ffffffff fffffffe
  325. B: REL=1c3
  326. B: ABS=1 0
  327. B: MSC=10
  328. B: LED=1f
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top