API tools faq
paste
Guest User

Untitled

a guest
Feb 28th, 2013
307
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 41.88 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2012.10-rc1-03956-gd7ea23d (Oct 11 2012 - 15:48:58)
  3. MMC: SUNXI SD/MMC: 0
  4. Loading U-Boot... OK!
  5. Jumping to U-Boot...
  6.  
  7.  
  8. U-Boot 2012.10-rc1-03956-gd7ea23d (Oct 11 2012 - 15:48:58) Allwinner Technology
  9.  
  10. CPU: SUNXI Family
  11. Board: A13-OLinuXino
  12. I2C: ready
  13. DRAM: 512 MiB
  14. MMC: SUNXI SD/MMC: 0
  15. *** Warning - bad CRC, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Hit any key to stop autoboot: 0
  21. reading uEnv.txt
  22.  
  23. 119 bytes read
  24. Loaded environment from uEnv.txt
  25. reading boot.scr
  26.  
  27. ** Unable to read "boot.scr" from mmc 0:1 **
  28. Loading file "boot.scr" from mmc device 0:1 xxa1
  29. Failed to mount ext2 filesystem...
  30. ** Bad ext2 partition or disk - mmc 0:1 **
  31. ext2load - load binary file from a Ext2 filesystem
  32.  
  33. Usage:
  34. ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
  35. - load binary file 'filename' from 'dev' on 'interface'
  36. to address 'addr' from ext2 filesystem
  37. Loading file "boot/boot.scr" from mmc device 0:1 xxa1
  38. Failed to mount ext2 filesystem...
  39. ** Bad ext2 partition or disk - mmc 0:1 **
  40. ext2load - load binary file from a Ext2 filesystem
  41.  
  42. Usage:
  43. ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
  44. - load binary file 'filename' from 'dev' on 'interface'
  45. to address 'addr' from ext2 filesystem
  46. reading script.bin
  47.  
  48. 27068 bytes read
  49. reading uImage
  50.  
  51. 4204160 bytes read
  52. ## Booting kernel from Legacy Image at 48000000 ...
  53. Image Name: Linux-3.4.24
  54. Image Type: ARM Linux Kernel Image (uncompressed)
  55. Data Size: 4204096 Bytes = 4 MiB
  56. Load Address: 40008000
  57. Entry Point: 40008000
  58. Verifying Checksum ... OK
  59. Loading Kernel Image ... OK
  60. OK
  61.  
  62. Starting kernel ...
  63.  
  64. <6>Booting Linux on physical CPU 0
  65. <6>Initializing cgroup subsys cpuset
  66. <5>Linux version 3.4.24 (tele@tele-VB) (gcc version 4.6.3 (crosstool-NG 1.18.0) ) #1 PREEMPT Thu Feb 28 08:25:27 CET 2013
  67. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  68. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  69. Machine: sun5i
  70. <6>Memory cut off:
  71. <6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  72. <4>Ignoring unrecognised tag 0x00000000
  73. <6>Memory Reserved:
  74. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  75. <6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  76. <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
  77. Memory policy: ECC disabled, Data cache writeback
  78. <6>chip-id: Unknown (AW1625)
  79. <7>On node 0 totalpages: 114688
  80. <7>free_area_init_node: node 0, pgdat c0803c38, node_mem_map c094f000
  81. <7> Normal zone: 896 pages used for memmap
  82. <7> Normal zone: 0 pages reserved
  83. <7> Normal zone: 113792 pages, LIFO batch:31
  84. <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768<c>
  85. <7>pcpu-alloc: <c>[0] <c>0 <c>
  86. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  87. <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
  88. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  89. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  90. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  91. <6>Memory: 448MB = 448MB total
  92. <5>Memory: 330436k/330436k available, 128316k reserved, 0K highmem
  93. <5>Virtual kernel memory layout:
  94. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  95. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  96. vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
  97. lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  98. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  99. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  100. .text : 0xc0008000 - 0xc077c000 (7632 kB)
  101. .init : 0xc077c000 - 0xc07aa000 ( 184 kB)
  102. .data : 0xc07aa000 - 0xc080bb30 ( 391 kB)
  103. .bss : 0xc080bb54 - 0xc094e418 (1291 kB)
  104. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  105. <6>NR_IRQS:96
  106. <6>timer0: Periodic Mode
  107. <6>I-pipe, 24.000 MHz clocksource
  108. <6>sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  109. <6>Interrupt pipeline (release #4)
  110. <6>Console: colour dummy device 80x30
  111. <6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
  112. <6>pid_max: default: 32768 minimum: 301
  113. <6>Mount-cache hash table entries: 512
  114. <6>Initializing cgroup subsys cpuacct
  115. <6>Initializing cgroup subsys devices
  116. <6>Initializing cgroup subsys freezer
  117. <6>Initializing cgroup subsys blkio
  118. <6>CPU: Testing write buffer coherency: ok
  119. <6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  120. <6>Setting up static identity map for 0x40560430 - 0x40560488
  121. <6>devtmpfs: initialized
  122. <6>dummy:
  123. <6>NET: Registered protocol family 16
  124. <6>hw-breakpoint: debug architecture 0x4 unsupported.
  125. <5>PC-MSG set PLL4 rate : 360000000
  126. <5>PC-MSG set PLL6 rate : 600000000
  127. <5>PC-MSG set PLL6M rate : 100000000
  128. SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  129. <6>Initialize DMAC OK
  130. <6>bio: create slab <bio-0> at 0
  131. <5>SCSI subsystem initialized
  132. <6>usbcore: registered new interface driver usbfs
  133. <6>usbcore: registered new interface driver hub
  134. <6>usbcore: registered new device driver usb
  135. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  136. <6>cfg80211: Calling CRDA to update world regulatory domain
  137. <6>Init eGon pin module V2.0
  138. <6>Switching to clocksource ipipe_tsc
  139. <5>FS-Cache: Loaded
  140. <6>CacheFiles: Loaded
  141. [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
  142. [sw_hcd0]: usb host driver initialize........
  143. [sw_hcd0]: [sw_hcd_host0]: open_usb_clock
  144. [hcd0]: open, 0x60(0xc141), 0xcc(0x143)
  145. [sw_hcd0]: host_init_state = 0
  146. [sw_hcd0]: platform is usb host
  147. [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  148. [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  149. <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  150. <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  151. <6>hub 1-0:1.0: USB hub found
  152. <6>hub 1-0:1.0: 1 port detected
  153. wrn: hcd is not enable, need not start hcd
  154. [sw_hcd0]: sw_usb_host0_disable start
  155. -------sw_hcd0_soft_disconnect---------
  156. [sw_hcd_host0]: Set USB Power OFF
  157. wrn: hcd is not enable, need not stop hcd
  158. [sw_hcd0]: sw_usb_host0_disable end
  159. [sw_udc]: udc_init: version 20080411
  160. axp driver uning configuration failed(562)
  161. axp driver uning configuration failed(574)
  162. <6>NET: Registered protocol family 2
  163. <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  164. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  165. <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  166. <6>TCP: Hash tables configured (established 16384 bind 16384)
  167. <6>TCP: reno registered
  168. <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
  169. <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  170. <6>NET: Registered protocol family 1
  171. <6>RPC: Registered named UNIX socket transport module.
  172. <6>RPC: Registered udp transport module.
  173. <6>RPC: Registered tcp transport module.
  174. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  175. [pm]aw_pm_init!
  176. <6>audit: initializing netlink socket (disabled)
  177. <5>type=2000 audit(0.360:1): initialized
  178. <6>I-pipe: head domain Xenomai registered.
  179. <6>Xenomai: hal/arm started.
  180. <6>Xenomai: scheduling class idle registered.
  181. <6>Xenomai: scheduling class rt registered.
  182. <6>Xenomai: real-time nucleus v2.6.2.1 (Day At The Beach) loaded.
  183. <6>Xenomai: debug mode enabled.
  184. <6>Xenomai: starting native API services.
  185. <6>Xenomai: starting POSIX services.
  186. <6>Xenomai: starting RTDM services.
  187. <5>VFS: Disk quotas dquot_6.5.2
  188. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  189. <6>NTFS driver 2.1.30 [Flags: R/W].
  190. <6>fuse init (API version 7.18)
  191. <6>msgmni has been set to 645
  192. <6>alg: No test for stdrng (krng)
  193. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  194. <6>io scheduler noop registered
  195. <6>io scheduler deadline registered
  196. <6>io scheduler cfq registered (default)
  197. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  198. <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  199. <3>[uart]: failed to get uart2's used information
  200. <3>[uart]: failed to get uart3's used information
  201. <6>[uart]: used uart info.: 0x02
  202. <6>[uart]: serial probe 1 irq 2 mapbase 0x01c28400
  203. <6>sunxi-uart.1: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A
  204. [ 0.000000] Booting Linux on physical CPU 0
  205. [ 0.000000] Initializing cgroup subsys cpuset
  206. [ 0.000000] Linux version 3.4.24 (tele@tele-VB) (gcc version 4.6.3 (crosstool-NG 1.18.0) ) #1 PREEMPT Thu Feb 28 08:25:27 CET 2013
  207. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  208. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  209. [ 0.000000] Machine: sun5i
  210. [ 0.000000] Memory cut off:
  211. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  212. [ 0.000000] Ignoring unrecognised tag 0x00000000
  213. [ 0.000000] Memory Reserved:
  214. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  215. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  216. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  217. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  218. [ 0.000000] chip-id: Unknown (AW1625)
  219. [ 0.000000] On node 0 totalpages: 114688
  220. [ 0.000000] free_area_init_node: node 0, pgdat c0803c38, node_mem_map c094f000
  221. [ 0.000000] Normal zone: 896 pages used for memmap
  222. [ 0.000000] Normal zone: 0 pages reserved
  223. [ 0.000000] Normal zone: 113792 pages, LIFO batch:31
  224. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  225. [ 0.000000] pcpu-alloc: [0] 0
  226. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  227. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
  228. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  229. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  230. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  231. [ 0.000000] Memory: 448MB = 448MB total
  232. [ 0.000000] Memory: 330436k/330436k available, 128316k reserved, 0K highmem
  233. [ 0.000000] Virtual kernel memory layout:
  234. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  235. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  236. [ 0.000000] vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
  237. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  238. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  239. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  240. [ 0.000000] .text : 0xc0008000 - 0xc077c000 (7632 kB)
  241. [ 0.000000] .init : 0xc077c000 - 0xc07aa000 ( 184 kB)
  242. [ 0.000000] .data : 0xc07aa000 - 0xc080bb30 ( 391 kB)
  243. [ 0.000000] .bss : 0xc080bb54 - 0xc094e418 (1291 kB)
  244. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  245. [ 0.000000] NR_IRQS:96
  246. [ 0.000000] timer0: Periodic Mode
  247. [ 0.000000] I-pipe, 24.000 MHz clocksource
  248. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  249. [ 0.000000] Interrupt pipeline (release #4)
  250. [ 0.000000] Console: colour dummy device 80x30
  251. [ 0.010000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  252. [ 0.060000] pid_max: default: 32768 minimum: 301
  253. [ 0.060000] Mount-cache hash table entries: 512
  254. [ 0.070000] Initializing cgroup subsys cpuacct
  255. [ 0.070000] Initializing cgroup subsys devices
  256. [ 0.070000] Initializing cgroup subsys freezer
  257. [ 0.080000] Initializing cgroup subsys blkio
  258. [ 0.080000] CPU: Testing write buffer coherency: ok
  259. [ 0.080000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  260. [ 0.090000] Setting up static identity map for 0x40560430 - 0x40560488
  261. [ 0.100000] devtmpfs: initialized
  262. [ 0.100000] dummy:
  263. [ 0.100000] NET: Registered protocol family 16
  264. [ 0.110000] hw-breakpoint: debug architecture 0x4 unsupported.
  265. [ 0.110000] PC-MSG set PLL4 rate : 360000000
  266. [ 0.120000] PC-MSG set PLL6 rate : 600000000
  267. [ 0.120000] PC-MSG set PLL6M rate : 100000000
  268. [ 0.130000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  269. [ 0.130000] Initialize DMAC OK
  270. [ 0.140000] bio: create slab <bio-0> at 0
  271. [ 0.140000] SCSI subsystem initialized
  272. [ 0.150000] usbcore: registered new interface driver usbfs
  273. [ 0.150000] usbcore: registered new interface driver hub
  274. [ 0.150000] usbcore: registered new device driver usb
  275. [ 0.160000] Advanced Linux Sound Architecture Driver Version 1.0.25.
  276. [ 0.170000] cfg80211: Calling CRDA to update world regulatory domain
  277. [ 0.170000] Init eGon pin module V2.0
  278. [ 0.180000] Switching to clocksource ipipe_tsc
  279. [ 0.180000] FS-Cache: Loaded
  280. [ 0.180000] CacheFiles: Loaded
  281. [ 0.190000] [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
  282. [ 0.190000] [sw_hcd0]: usb host driver initialize........
  283. [ 0.200000] [sw_hcd0]: [sw_hcd_host0]: open_usb_clock
  284. [ 0.200000] [hcd0]: open, 0x60(0xc141), 0xcc(0x143)
  285. [ 0.210000] [sw_hcd0]: host_init_state = 0
  286. [ 0.210000] [sw_hcd0]: platform is usb host
  287. [ 0.210000] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  288. [ 0.220000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  289. [ 0.230000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  290. [ 0.240000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  291. [ 0.250000] hub 1-0:1.0: USB hub found
  292. [ 0.250000] hub 1-0:1.0: 1 port detected
  293. [ 0.250000] wrn: hcd is not enable, need not start hcd
  294. [ 0.260000] [sw_hcd0]: sw_usb_host0_disable start
  295. [ 0.260000] -------sw_hcd0_soft_disconnect---------
  296. [ 0.260000] [sw_hcd_host0]: Set USB Power OFF
  297. [ 0.260000] wrn: hcd is not enable, need not stop hcd
  298. [ 0.270000] [sw_hcd0]: sw_usb_host0_disable end
  299. [ 0.280000] [sw_udc]: udc_init: version 20080411
  300. [ 0.280000] axp driver uning configuration failed(562)
  301. [ 0.280000] axp driver uning configuration failed(574)
  302. [ 0.290000] NET: Registered protocol family 2
  303. [ 0.290000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  304. [ 0.300000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  305. [ 0.300000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  306. [ 0.310000] TCP: Hash tables configured (established 16384 bind 16384)
  307. [ 0.320000] TCP: reno registered
  308. [ 0.320000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  309. [ 0.320000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  310. [ 0.330000] NET: Registered protocol family 1
  311. [ 0.330000] RPC: Registered named UNIX socket transport module.
  312. [ 0.340000] RPC: Registered udp transport module.
  313. [ 0.340000] RPC: Registered tcp transport module.
  314. [ 0.350000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  315. [ 0.350000] [pm]aw_pm_init!
  316. [ 0.350000] audit: initializing netlink socket (disabled)
  317. [ 0.360000] type=2000 audit(0.360:1): initialized
  318. [ 0.360000] I-pipe: head domain Xenomai registered.
  319. [ 0.370000] Xenomai: hal/arm started.
  320. [ 0.370000] Xenomai: scheduling class idle registered.
  321. [ 0.380000] Xenomai: scheduling class rt registered.
  322. [ 0.380000] Xenomai: real-time nucleus v2.6.2.1 (Day At The Beach) loaded.
  323. [ 0.390000] Xenomai: debug mode enabled.
  324. [ 0.390000] Xenomai: starting native API services.
  325. [ 0.400000] Xenomai: starting POSIX services.
  326. [ 0.400000] Xenomai: starting RTDM services.
  327. [ 0.410000] VFS: Disk quotas dquot_6.5.2
  328. [ 0.410000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  329. [ 0.420000] NTFS driver 2.1.30 [Flags: R/W].
  330. [ 0.430000] fuse init (API version 7.18)
  331. [ 0.430000] msgmni has been set to 645
  332. [ 0.440000] alg: No test for stdrng (krng)
  333. [ 0.440000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  334. [ 0.450000] io scheduler noop registered
  335. [ 0.450000] io scheduler deadline registered
  336. [ 0.450000] io scheduler cfq registered (default)
  337. [ 0.460000] sunxi disp driver loaded (/dev/disp api 1.0)
  338. [ 0.460000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  339. [ 0.470000] [uart]: failed to get uart2's used information
  340. [ 0.480000] [uart]: failed to get uart3's used information
  341. [ 0.480000] [uart]: used uart info.: 0x02
  342. [ 0.480000] [uart]: serial probe 1 irq 2 mapbase 0x01c28400
  343. [ 0.500000] sunxi-uart.1: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A
  344. <6>console [ttyS0] enabled
  345. [ 0.510000] console [ttyS0] enabled
  346. <6>brd: module loaded
  347. [ 0.520000] brd: module loaded
  348. <6>loop: module loaded
  349. [ 0.530000] loop: module loaded
  350. <6>'Low Performance USB Block' driver is deprecated. Please switch to usb-storage
  351. [ 0.530000] 'Low Performance USB Block' driver is deprecated. Please switch to usb-storage
  352. <6>usbcore: registered new interface driver ub
  353. [ 0.540000] usbcore: registered new interface driver ub
  354. [NAND]nand driver, init.
  355. [ 0.550000] [NAND]nand driver, init.
  356. cmu_clk is 408
  357. [ 0.550000] cmu_clk is 408
  358. nand clk init end
  359. [ 0.560000] nand clk init end
  360. offset 0xc: 0xe141
  361. [ 0.560000] offset 0xc: 0xe141
  362. offset 0x14: 0x8200000a
  363. [ 0.570000] offset 0x14: 0x8200000a
  364. [NAND] nand gpio_request
  365. [ 0.570000] [NAND] nand gpio_request
  366. [NAND] nand driver version: 0x2 0x9
  367. [ 0.580000] [NAND] nand driver version: 0x2 0x9
  368. nand interrupte register ok
  369. [ 0.590000] nand interrupte register ok
  370. ret of NFC_ChangMode is 0
  371. [ 0.590000] ret of NFC_ChangMode is 0
  372. dma_hdle is 0
  373. [ 0.600000] dma_hdle is 0
  374. dma_hdle is 10000008
  375. [ 0.600000] dma_hdle is 10000008
  376. cmu_clk is 408
  377. [ 0.610000] cmu_clk is 408
  378. nand clk init end
  379. [ 0.620000] nand clk init end
  380. offset 0xc: 0xe141
  381. [ 0.620000] offset 0xc: 0xe141
  382. offset 0x14: 0x8200000d
  383. [ 0.630000] offset 0x14: 0x8200000d
  384. The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 7782400
  385. [ 0.710000] The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 7782400
  386. The 1 disk name = bootloader, class name = DISK, disk size = 32768
  387. [ 0.720000] The 1 disk name = bootloader, class name = DISK, disk size = 32768
  388. The 2 disk name = env, class name = DISK, disk size = 4096
  389. [ 0.730000] The 2 disk name = env, class name = DISK, disk size = 4096
  390. The 3 disk name = boot, class name = DISK, disk size = 65536
  391. [ 0.740000] The 3 disk name = boot, class name = DISK, disk size = 65536
  392. The 4 disk name = system, class name = DISK, disk size = 524288
  393. [ 0.750000] The 4 disk name = system, class name = DISK, disk size = 524288
  394. The 5 disk name = data, class name = DISK, disk size = 1048576
  395. [ 0.760000] The 5 disk name = data, class name = DISK, disk size = 1048576
  396. The 6 disk name = misc, class name = DISK, disk size = 2048
  397. [ 0.770000] The 6 disk name = misc, class name = DISK, disk size = 2048
  398. The 7 disk name = recovery, class name = DISK, disk size = 65536
  399. [ 0.780000] The 7 disk name = recovery, class name = DISK, disk size = 65536
  400. The 8 disk name = cache, class name = DISK, disk size = 524288
  401. [ 0.790000] The 8 disk name = cache, class name = DISK, disk size = 524288
  402. The 9 disk name = UDISK, class name = DISK, disk size = 5513216
  403. [ 0.800000] The 9 disk name = UDISK, class name = DISK, disk size = 5513216
  404. The 9 disk size = 5513216
  405. [ 0.810000] The 9 disk size = 5513216
  406. part total count = 10
  407. [ 0.810000] part total count = 10
  408. <6> nand: unknown partition table
  409. [ 0.820000] nand: unknown partition table
  410. <6> nanda:
  411. [ 0.830000] nanda:
  412. <6> nandb: unknown partition table
  413. [ 0.840000] nandb: unknown partition table
  414. <6> nandc: unknown partition table
  415. [ 0.850000] nandc: unknown partition table
  416. <6> nandd: unknown partition table
  417. [ 0.860000] nandd: unknown partition table
  418. <6> nande: unknown partition table
  419. [ 0.870000] nande: unknown partition table
  420. <6> nandf: unknown partition table
  421. [ 0.880000] nandf: unknown partition table
  422. <6> nandg: unknown partition table
  423. [ 0.890000] nandg: unknown partition table
  424. <6> nandh: unknown partition table
  425. [ 0.900000] nandh: unknown partition table
  426. <6> nandi:
  427. [ 0.910000] nandi:
  428. <6>benn: nand probe enter
  429. [ 0.910000] benn: nand probe enter
  430. [NAND]nand driver, ok.
  431. [ 0.920000] [NAND]nand driver, ok.
  432. [spi]: sw spi init !!
  433. [ 0.920000] [spi]: sw spi init !!
  434. [spi]: sw spi init fetch spi0 uning configuration failed
  435. [ 0.930000] [spi]: sw spi init fetch spi0 uning configuration failed
  436. [spi]: Get spi devices number failed
  437. [ 0.940000] [spi]: Get spi devices number failed
  438. [spi]: register spi devices board info failed
  439. [ 0.950000] [spi]: register spi devices board info failed
  440. <4>spi: cannot find any using configuration for all 4 spi controllers, return directly!
  441. [ 0.960000] spi: cannot find any using configuration for all 4 spi controllers, return directly!
  442. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  443. [ 0.970000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  444. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  445. [ 0.980000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  446. [sw-ehci1]: open clock
  447. [ 0.990000] [sw-ehci1]: open clock
  448. [sw-ehci1]: Set USB Power ON
  449. [ 1.020000] [sw-ehci1]: Set USB Power ON
  450. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  451. [ 1.030000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  452. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  453. [ 1.040000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  454. <6>sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  455. [ 1.050000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  456. <6>sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  457. [ 1.080000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  458. ehci_irq: port change detect
  459. [ 1.090000] ehci_irq: port change detect
  460. <6>hub 2-0:1.0: USB hub found
  461. [ 1.090000] hub 2-0:1.0: USB hub found
  462. <6>hub 2-0:1.0: 1 port detected
  463. [ 1.100000] hub 2-0:1.0: 1 port detected
  464. [sw-ohci1]: open clock
  465. [ 1.110000] [sw-ohci1]: open clock
  466. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  467. [ 1.130000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  468. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  469. [ 1.140000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  470. <6>sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  471. [ 1.150000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  472. <6>hub 3-0:1.0: USB hub found
  473. [ 1.220000] hub 3-0:1.0: USB hub found
  474. <6>hub 3-0:1.0: 1 port detected
  475. [ 1.230000] hub 3-0:1.0: 1 port detected
  476. <6>Initializing USB Mass Storage driver...
  477. [ 1.230000] Initializing USB Mass Storage driver...
  478. <6>usbcore: registered new interface driver usb-storage
  479. [ 1.240000] usbcore: registered new interface driver usb-storage
  480. <6>USB Mass Storage support registered.
  481. [ 1.250000] USB Mass Storage support registered.
  482. <6>usbcore: registered new interface driver ums-alauda
  483. [ 1.260000] usbcore: registered new interface driver ums-alauda
  484. <6>usbcore: registered new interface driver ums-cypress
  485. [ 1.270000] usbcore: registered new interface driver ums-cypress
  486. <6>usbcore: registered new interface driver ums-datafab
  487. [ 1.280000] usbcore: registered new interface driver ums-datafab
  488. <6>usbcore: registered new interface driver ums_eneub6250
  489. [ 1.290000] usbcore: registered new interface driver ums_eneub6250
  490. <6>usbcore: registered new interface driver ums-freecom
  491. [ 1.300000] usbcore: registered new interface driver ums-freecom
  492. <6>usbcore: registered new interface driver ums-isd200
  493. [ 1.310000] usbcore: registered new interface driver ums-isd200
  494. <6>usbcore: registered new interface driver ums-jumpshot
  495. [ 1.320000] usbcore: registered new interface driver ums-jumpshot
  496. <6>usbcore: registered new interface driver ums-karma
  497. [ 1.330000] usbcore: registered new interface driver ums-karma
  498. <6>usbcore: registered new interface driver ums-onetouch
  499. [ 1.340000] usbcore: registered new interface driver ums-onetouch
  500. <6>usbcore: registered new interface driver ums-realtek
  501. [ 1.350000] usbcore: registered new interface driver ums-realtek
  502. <6>usbcore: registered new interface driver ums-sddr09
  503. [ 1.360000] usbcore: registered new interface driver ums-sddr09
  504. <6>usbcore: registered new interface driver ums-sddr55
  505. [ 1.370000] usbcore: registered new interface driver ums-sddr55
  506. <6>usbcore: registered new interface driver ums-usbat
  507. [ 1.380000] usbcore: registered new interface driver ums-usbat
  508. <6>mousedev: PS/2 mouse device common for all mice
  509. [ 1.390000] mousedev: PS/2 mouse device common for all mice
  510. ========RTC Inital ===================
  511. [ 1.400000] ========RTC Inital ===================
  512. rtc_fetch_sysconfig_para: after: rtc_twi_addr is 0x51, dirty_addr_buf: 0x51. dirty_addr_buf[1]: 0xfffe
  513. [ 1.410000] rtc_fetch_sysconfig_para: after: rtc_twi_addr is 0x51, dirty_addr_buf: 0x51. dirty_addr_buf[1]: 0xfffe
  514. rtc_fetch_sysconfig_para: rtc_twi_id is 1.
  515. [ 1.420000] rtc_fetch_sysconfig_para: rtc_twi_id is 1.
  516. rtc_fetch_sysconfig_para:ok
  517. [ 1.430000] rtc_fetch_sysconfig_para:ok
  518. pcf8563_init: after fetch_sysconfig_para: normal_i2c: 0x51. normal_i2c[1]: 0xfffe
  519. [ 1.430000] pcf8563_init: after fetch_sysconfig_para: normal_i2c: 0x51. normal_i2c[1]: 0xfffe
  520. <6>usb 2-1: new high-speed USB device number 2 using sw-ehci
  521. [ 1.440000] usb 2-1: new high-speed USB device number 2 using sw-ehci
  522. <6>i2c /dev entries driver
  523. [ 1.450000] i2c /dev entries driver
  524. !!! base_Addr = 0xf1c2ac00
  525. [ 1.460000] !!! base_Addr = 0xf1c2ac00
  526. config i2c gpio with gpio_config api
  527. [ 1.470000] config i2c gpio with gpio_config api
  528. twi0, apb clock = 24000000
  529. [ 1.470000] twi0, apb clock = 24000000
  530. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  531. [ 1.480000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  532. [AXP]axp driver uning configuration failed(323)
  533. [ 1.490000] [AXP]axp driver uning configuration failed(323)
  534. [AXP]power_start = 0
  535. [ 1.500000] [AXP]power_start = 0
  536. rtc_detect,line:157,twi_id:1,adapter->nr:0
  537. [ 1.510000] rtc_detect,line:157,twi_id:1,adapter->nr:0
  538. rtc_detect,line:166
  539. [ 1.520000] rtc_detect,line:166
  540. <6>I2C: i2c-0: AW16XX I2C adapter
  541. [ 1.520000] I2C: i2c-0: AW16XX I2C adapter
  542. **********start************
  543. [ 1.530000] **********start************
  544. 0x40
  545. [ 1.540000] 0x40
  546. 0xf8
  547. [ 1.540000] 0xf8
  548. 0x28
  549. [ 1.540000] 0x28
  550. 0x0
  551. [ 1.540000] 0x0
  552. 0x0
  553. [ 1.550000] 0x0
  554. **********end************
  555. [ 1.550000] **********end************
  556. !!! base_Addr = 0xf1c2b000
  557. [ 1.560000] !!! base_Addr = 0xf1c2b000
  558. twi1, apb clock = 24000000
  559. [ 1.560000] twi1, apb clock = 24000000
  560. rtc_detect,line:157,twi_id:1,adapter->nr:1
  561. [ 1.570000] rtc_detect,line:157,twi_id:1,adapter->nr:1
  562. <6>rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
  563. [ 1.580000] rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
  564. rtc_detect,line:162
  565. [ 1.590000] rtc_detect,line:162
  566. pcf8563_probe,line:657
  567. [ 1.600000] pcf8563_probe,line:657
  568. <6>pcf8563 1-0051: chip found, driver version 0.4.3
  569. [ 1.600000] pcf8563 1-0051: chip found, driver version 0.4.3
  570. <6>pcf8563 1-0051: low voltage detected, date/time is not reliable.
  571. [ 1.610000] pcf8563 1-0051: low voltage detected, date/time is not reliable.
  572. pcf8563_get_datetime,raw data is st1=08, st2=80, sec=81, min=df, hr=9a, mday=9e, wday=87, mon=86, year=d4
  573. [ 1.620000] pcf8563_get_datetime,raw data is st1=08, st2=80, sec=81, min=df, hr=9a, mday=9e, wday=87, mon=86, year=d4
  574. pcf8563_get_datetime: tm is secs=1, mins=65, hours=20,mday=24, mon=5, year=134, wday=7
  575. [ 1.630000] pcf8563_get_datetime: tm is secs=1, mins=65, hours=20,mday=24, mon=5, year=134, wday=7
  576. <3>pcf8563 1-0051: retrieved date/time is not valid.
  577. [ 1.640000] pcf8563 1-0051: retrieved date/time is not valid.
  578. <6>pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
  579. [ 1.650000] pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
  580. <6>I2C: i2c-1: AW16XX I2C adapter
  581. [ 1.660000] I2C: i2c-1: AW16XX I2C adapter
  582. **********start************
  583. [ 1.660000] **********start************
  584. 0x40
  585. [ 1.670000] 0x40
  586. 0xf8
  587. [ 1.670000] 0xf8
  588. 0x58
  589. [ 1.680000] 0x58
  590. 0x0
  591. [ 1.680000] 0x0
  592. 0x0
  593. [ 1.680000] 0x0
  594. **********end************
  595. [ 1.680000] **********end************
  596. !!! base_Addr = 0xf1c2b400
  597. [ 1.690000] !!! base_Addr = 0xf1c2b400
  598. twi2, apb clock = 24000000
  599. [ 1.700000] twi2, apb clock = 24000000
  600. rtc_detect,line:157,twi_id:1,adapter->nr:2
  601. [ 1.700000] rtc_detect,line:157,twi_id:1,adapter->nr:2
  602. rtc_detect,line:166
  603. [ 1.710000] rtc_detect,line:166
  604. <6>I2C: i2c-2: AW16XX I2C adapter
  605. [ 1.720000] I2C: i2c-2: AW16XX I2C adapter
  606. **********start************
  607. [ 1.720000] **********start************
  608. 0x40
  609. [ 1.730000] 0x40
  610. 0xf8
  611. [ 1.730000] 0xf8
  612. 0x58
  613. [ 1.740000] 0x58
  614. 0x0
  615. [ 1.740000] 0x0
  616. 0x0
  617. [ 1.740000] 0x0
  618. **********end************
  619. [ 1.740000] **********end************
  620. <6>lirc_dev: IR Remote Control driver registered, major 251
  621. [ 1.750000] lirc_dev: IR Remote Control driver registered, major 251
  622. <6>IR NEC protocol handler initialized
  623. [ 1.760000] IR NEC protocol handler initialized
  624. <6>IR RC5(x) protocol handler initialized
  625. [ 1.770000] IR RC5(x) protocol handler initialized
  626. <6>IR RC6 protocol handler initialized
  627. [ 1.780000] IR RC6 protocol handler initialized
  628. <6>IR JVC protocol handler initialized
  629. [ 1.790000] IR JVC protocol handler initialized
  630. <6>IR Sony protocol handler initialized
  631. [ 1.790000] IR Sony protocol handler initialized
  632. <6>IR RC5 (streamzap) protocol handler initialized
  633. [ 1.800000] IR RC5 (streamzap) protocol handler initialized
  634. <6>IR SANYO protocol handler initialized
  635. [ 1.810000] IR SANYO protocol handler initialized
  636. <6>IR MCE Keyboard/mouse protocol handler initialized
  637. [ 1.820000] IR MCE Keyboard/mouse protocol handler initialized
  638. <6>IR LIRC bridge handler initialized
  639. [ 1.830000] IR LIRC bridge handler initialized
  640. [cedar dev]: install start!!!
  641. [ 1.840000] [cedar dev]: install start!!!
  642. <4>cedar_dev: can't get major 150
  643. [ 1.850000] cedar_dev: can't get major 150
  644. [pa_drv] start!!!
  645. [ 1.860000] [pa_drv] start!!!
  646. [pa_drv] init end!!!
  647. [ 1.860000] [pa_drv] init end!!!
  648. <6>axp20_ldo1: 1300 mV
  649. [ 1.870000] axp20_ldo1: 1300 mV
  650. <6>hub 2-1:1.0: USB hub found
  651. [ 1.870000] hub 2-1:1.0: USB hub found
  652. <6>hub 2-1:1.0: 4 ports detected
  653. [ 1.880000] hub 2-1:1.0: 4 ports detected
  654. <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  655. [ 1.890000] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  656. <6>axp20_ldo3: 700 <--> 3500 mV at 3300 mV
  657. [ 1.900000] axp20_ldo3: 700 <--> 3500 mV at 3300 mV
  658. <6>axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
  659. [ 1.910000] axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
  660. <6>axp20_buck2: 700 <--> 2275 mV at 1400 mV
  661. [ 1.920000] axp20_buck2: 700 <--> 2275 mV at 1400 mV
  662. <6>axp20_buck3: 700 <--> 3500 mV at 1200 mV
  663. [ 1.930000] axp20_buck3: 700 <--> 3500 mV at 1200 mV
  664. <6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  665. [ 1.940000] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  666. <6>input: axp20-supplyer as /devices/platform/sun5i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  667. [ 1.950000] input: axp20-supplyer as /devices/platform/sun5i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  668. <4>axp20_ldo2: Failed to create debugfs directory
  669. [ 1.980000] axp20_ldo2: Failed to create debugfs directory
  670. <6>md: linear personality registered for level -1
  671. [ 1.990000] md: linear personality registered for level -1
  672. <6>md: multipath personality registered for level -4
  673. [ 2.000000] md: multipath personality registered for level -4
  674. <6>md: faulty personality registered for level -5
  675. [ 2.010000] md: faulty personality registered for level -5
  676. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  677. [ 2.020000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  678. <6>device-mapper: multipath: version 1.3.0 loaded
  679. [ 2.030000] device-mapper: multipath: version 1.3.0 loaded
  680. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  681. [ 2.040000] device-mapper: multipath round-robin: version 1.0.0 loaded
  682. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  683. [ 2.050000] device-mapper: multipath queue-length: version 0.1.0 loaded
  684. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  685. [ 2.060000] device-mapper: multipath service-time: version 0.2.0 loaded
  686. [mmc_pm]: no sdio card used in configuration
  687. [ 2.070000] [mmc_pm]: no sdio card used in configuration
  688. [mmc]: sunximmc_init
  689. [ 2.080000] [mmc]: sunximmc_init
  690. [mmc]: sunxi mmc controller using config : 0x1
  691. [ 2.090000] [mmc]: sunxi mmc controller using config : 0x1
  692. [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  693. [ 2.100000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  694. [mmc]: mmc 0 power off !!
  695. [ 2.110000] [mmc]: mmc 0 power off !!
  696. [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xd9b0c000, ret 0.
  697. [ 2.120000] [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xd9b0c000, ret 0.
  698. <6>usbcore: registered new interface driver usbhid
  699. [ 2.130000] usbcore: registered new interface driver usbhid
  700. <6>usbhid: USB HID core driver
  701. [ 2.140000] usbhid: USB HID core driver
  702. enter sun5i Audio codec!!!
  703. [ 2.150000] enter sun5i Audio codec!!!
  704. <6>sun5i audio support initialized
  705. [ 2.160000] sun5i audio support initialized
  706. sun5i Audio codec successfully loaded..
  707. [ 2.170000] sun5i Audio codec successfully loaded..
  708. <6>IPv4 over IPv4 tunneling driver
  709. [ 2.180000] IPv4 over IPv4 tunneling driver
  710. <6>TCP: cubic registered
  711. [ 2.180000] TCP: cubic registered
  712. <6>Initializing XFRM netlink socket
  713. [ 2.190000] Initializing XFRM netlink socket
  714. <6>NET: Registered protocol family 17
  715. [ 2.200000] NET: Registered protocol family 17
  716. <6>NET: Registered protocol family 15
  717. [ 2.210000] NET: Registered protocol family 15
  718. <6>8021q: 802.1Q VLAN Support v1.8
  719. [ 2.210000] 8021q: 802.1Q VLAN Support v1.8
  720. <6>VFP support v0.3: [ 2.220000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  721. implementor 41 architecture 3 part 30 variant c rev 3
  722. <5>Registering SWP/SWPB emulation handler
  723. [ 2.240000] Registering SWP/SWPB emulation handler
  724. <6>usb 2-1.2: new low-speed USB device number 3 using sw-ehci
  725. [ 2.240000] usb 2-1.2: new low-speed USB device number 3 using sw-ehci
  726. <6>registered taskstats version 1
  727. [ 2.250000] registered taskstats version 1
  728. <5>PC-MSG set PLL3 rate : 297000000
  729. [ 2.260000] PC-MSG set PLL3 rate : 297000000
  730. <5>PC-MSG set PLL3 rate : 279000000
  731. [ 2.270000] PC-MSG set PLL3 rate : 279000000
  732. <6>input: Logitech USB-PS/2 Optical Mouse as /devices/platform/sw-ehci.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
  733. [ 2.380000] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/sw-ehci.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
  734. <6>generic-usb 0003:046D:C03E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-sw-ehci-1.2/input0
  735. [ 2.390000] generic-usb 0003:046D:C03E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-sw-ehci-1.2/input0
  736. <6>usb 2-1.4: new high-speed USB device number 4 using sw-ehci
  737. [ 2.480000] usb 2-1.4: new high-speed USB device number 4 using sw-ehci
  738. [mmc]: mmc 0 detect change, present 1
  739. [ 3.120000] [mmc]: mmc 0 detect change, present 1
  740. <6>Console: switching to colour frame buffer device 100x37
  741. [ 3.200000] Console: switching to colour frame buffer device 100x37
  742. <4>axp20_buck3: incomplete constraints, leaving on
  743. [ 3.220000] axp20_buck3: incomplete constraints, leaving on
  744. <4>axp20_buck2: incomplete constraints, leaving on
  745. [ 3.230000] axp20_buck2: incomplete constraints, leaving on
  746. <4>axp20_ldo4: incomplete constraints, leaving on
  747. [ 3.240000] axp20_ldo4: incomplete constraints, leaving on
  748. <4>axp20_ldo3: incomplete constraints, leaving on
  749. [ 3.250000] axp20_ldo3: incomplete constraints, leaving on
  750. <4>axp20_ldo2: incomplete constraints, leaving on
  751. [ 3.260000] axp20_ldo2: incomplete constraints, leaving on
  752. <4>axp20_ldo1: incomplete constraints, leaving on
  753. [ 3.270000] axp20_ldo1: incomplete constraints, leaving on
  754. <6>pcf8563 1-0051: low voltage detected, date/time is not reliable.
  755. [ 3.290000] pcf8563 1-0051: low voltage detected, date/time is not reliable.
  756. pcf8563_get_datetime,raw data is st1=08, st2=80, sec=82, min=df, hr=9a, mday=9e, wday=87, mon=86, year=d4
  757. [ 3.300000] pcf8563_get_datetime,raw data is st1=08, st2=80, sec=82, min=df, hr=9a, mday=9e, wday=87, mon=86, year=d4
  758. pcf8563_get_datetime: tm is secs=2, mins=65, hours=20,mday=24, mon=5, year=134, wday=7
  759. [ 3.310000] pcf8563_get_datetime: tm is secs=2, mins=65, hours=20,mday=24, mon=5, year=134, wday=7
  760. <3>pcf8563 1-0051: retrieved date/time is not valid.
  761. [ 3.320000] pcf8563 1-0051: retrieved date/time is not valid.
  762. <3>pcf8563 1-0051: hctosys: invalid date/time
  763. [ 3.330000] pcf8563 1-0051: hctosys: invalid date/time
  764. <6>ALSA device list:
  765. [ 3.340000] ALSA device list:
  766. <6> #0: sun5i-CODEC Audio Codec
  767. [ 3.340000] #0: sun5i-CODEC Audio Codec
  768. <6>md: Waiting for all devices to be available before autodetect
  769. [ 3.350000] md: Waiting for all devices to be available before autodetect
  770. <6>md: If you don't use raid, use raid=noautodetect
  771. [ 3.360000] md: If you don't use raid, use raid=noautodetect
  772. <6>md: Autodetecting RAID arrays.
  773. [ 3.370000] md: Autodetecting RAID arrays.
  774. <6>md: Scanned 0 and added 0 devices.
  775. [ 3.380000] md: Scanned 0 and added 0 devices.
  776. <6>md: autorun ...
  777. [ 3.390000] md: autorun ...
  778. <6>md: ... autorun DONE.
  779. [ 3.390000] md: ... autorun DONE.
  780. <6>Waiting for root device /dev/mmcblk0p2...
  781. [ 3.400000] Waiting for root device /dev/mmcblk0p2...
  782. [mmc]: mmc 0 power on !!
  783. [ 3.420000] [mmc]: mmc 0 power on !!
  784. [mmc]: sdxc_request_done(L1113): [ 3.460000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  785. smc 0 err, cmd 52, RTO !!
  786. [mmc]: sdxc_request_done(L1113): [ 3.470000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  787. smc 0 err, cmd 52, RTO !!
  788. [mmc]: sdxc_request_done(L1113): [ 3.490000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  789. smc 0 err, cmd 5, RTO !!
  790. [mmc]: sdxc_request_done(L1113): [ 3.500000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  791. smc 0 err, cmd 5, RTO !!
  792. [mmc]: sdxc_request_done(L1113): [ 3.510000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  793. smc 0 err, cmd 5, RTO !!
  794. [mmc]: sdxc_request_done(L1113): [ 3.520000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  795. smc 0 err, cmd 5, RTO !!
  796. <6>mmc0: new high speed SDHC card at address b368
  797. [ 3.570000] mmc0: new high speed SDHC card at address b368
  798. <6>mmcblk0: mmc0:b368 SD 7.70 GiB
  799. [ 3.580000] mmcblk0: mmc0:b368 SD 7.70 GiB
  800. <6> mmcblk0: p1 p2
  801. [ 3.590000] mmcblk0: p1 p2
  802. <4>EXT2-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
  803. [ 3.640000] EXT2-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
  804. <6>VFS: Mounted root (ext2 filesystem) on device 179:2.
  805. [ 3.670000] VFS: Mounted root (ext2 filesystem) on device 179:2.
  806. <6>devtmpfs: mounted
  807. [ 3.680000] devtmpfs: mounted
  808. <6>Freeing init memory: 184K
  809. [ 3.690000] Freeing init memory: 184K
  810. Starting logging: OK
  811. Initializing random number generator... done.
  812. Starting network...
  813. ip: SIOCGIFFLAGS: No such device
  814. rfkill: Cannot open RFKILL control device
  815. Could not read interface wlan0 flags: No such device
  816. WEXT: Could not set interface 'wlan0' UP
  817. wlan0: Failed to initialize driver interface
  818. Getting initial time via ntp.
  819. Starting network time protocol daemon: ntpd.
  820. Starting dropbear sshd: OK
  821. Starting sshd: OK
  822.  
  823. Welcome to Buildroot-Laci
  824. sun5i login: root
  825. Password:
  826. root@sun5i:~# ls /proc/xenomai/
  827. acct heap latency sched timebases version
  828. apc interfaces registry schedclasses timer
  829. faults irq rtdm stat timerstat
  830. root@sun5i:~# more /proc/xenomai/latency
  831. 9499
  832. root@sun5i:~# more /proc/xenomai/timer
  833. status=on+watchdog:setup=4374:clock=31016645508:timerdev=sun5i_timer4:clockdev=i
  834. pipe_tsc
  835. root@sun5i:~# more /proc/xenomai/timerstat
  836.  
  837. *** /proc/xenomai/timerstat: directory ***
  838.  
  839. root@sun5i:~# more /proc/xenomai/stat
  840. CPU PID MSW CSW PF STAT %CPU NAME
  841. 0 0 0 0 0 00500080 100.0 ROOT
  842. 0 0 0 1322 0 00000000 0.0 IRQ67: [timer]
  843. root@sun5i:~# more /proc/xenomai/faults
  844. TRAP CPU0
  845. 0: 0 (Data or instruction access)
  846. 1: 0 (Section fault)
  847. 2: 0 (Generic data abort)
  848. 3: 0 (Unknown exception)
  849. 4: 0 (Instruction breakpoint)
  850. 5: 0 (Floating point exception)
  851. 6: 0 (VFP Floating point exception)
  852. 7: 0 (Undefined instruction)
  853. 8: 0 (Unaligned access exception)
  854. root@sun5i:~# more /proc/xenomai/version
  855. 2.6.2.1
  856. root@sun5i:~# more /proc/xenomai/apc
  857. APC CPU0
  858. 0: 0 (pipe_wakeup)
  859. 1: 0 (xnselectors_destroy)
  860. 2: 0 (lostage_handler)
  861. 3: 0 (registry_export)
  862. 4: 0 (pse51_lostage_handler)
  863. 5: 0 (deferred RTDM close)
  864. root@sun5i:~# more /proc/xenomai/acct
  865. 0 0 0 0 0 00500080 43999999322 43999745239 1364391566674 ROOT
  866. 0 0 0 1366 0 00000000 43999999322 214208 5617999 IRQ67: [timer]
  867. root@sun5i:~# more /proc/ipipe/
  868. Linux Xenomai version
  869. root@sun5i:~# more /proc/ipipe/Xenomai
  870. +--- Handled
  871. |+-- Locked
  872. ||+- Virtual
  873. [IRQ] |||
  874. 0: ...
  875. 1: ...
  876. 2: ...
  877. 3: ...
  878. 4: ...
  879. 5: ...
  880. 6: ...
  881. 7: ...
  882. 8: ...
  883. 9: ...
  884. 10: ...
  885. 11: ...
  886. 12: ...
  887. 13: ...
  888. 14: ...
  889. 15: ...
  890. 16: ...
  891. 17: ...
  892. 18: ...
  893. root@sun5i:~# more /proc/ipipe/version
  894. 4
  895. root@sun5i:~# more /proc/ipipe/Linux
  896. +--- Handled
  897. |+-- Locked
  898. ||+- Virtual
  899. [IRQ] |||
  900. 0: H..
  901. 1: H..
  902. 2: H..
  903. 3: H..
  904. 4: H..
  905. 5: H..
  906. 6: H..
  907. 7: H..
  908. 8: H..
  909. 9: H..
  910. 10: H..
  911. 11: H..
  912. 12: H..
  913. 13: H..
  914. 14: H..
  915. 15: H..
  916. 16: H..
  917. 17: H..
  918. 18: H..
  919. root@sun5i:~#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!