API tools faq
paste
Advertisement
mikroavr

ESP32GPS

mikroavr
Oct 23rd, 2022 (edited)
1,236
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Arduino 16.07 KB | None | 0 0
raw download clone embed print report
  1. /*2110/2022
  2.    editing nextion OK
  3. */
  4.  
  5. #include <TinyGPS++.h>
  6. TinyGPSPlus gps;
  7. //#define ss Serial1
  8. #include <WiFi.h>
  9.  
  10. #define RXD_RS485 33 // rubah dari 27 ke 33
  11. #define TXD_RS485 32  //14 yg baru 32 yg lm
  12.  
  13. #define pinLed 13
  14.  
  15. #define RXD_GPS 17
  16. #define TXD_GPS 16
  17.  
  18. String str_lat = "";
  19. String str_lon = "";
  20. String str_date = "";
  21. String str_time = "";
  22.  
  23. int myIP;
  24. int _gauge_display;
  25. int val_sen, val_min;
  26. double val_max;
  27. const char* ssid     = "untan";
  28. const char* password = "";
  29.  
  30. int buf_detik, detik = 0;
  31. int jam, menit;
  32. int tahun, bulan, tanggal;
  33. int counter;
  34. int pin_value = 0;
  35. int progress_value;
  36. bool ledState = 0;
  37.  
  38. /*Nextion */
  39. uint16_t voltageGraph;   // a variable to store the reading
  40. // for simplicity reasons, we do not use float and we are going to take the measure in millivolts
  41.  
  42. const int volt = 34;
  43. int potValue = 0;
  44. const int REFRESH_TIME = 100;           // time to refresh the Nextion page every 100 ms
  45. unsigned long refresh_timer = millis();
  46. unsigned long cur_time, old_time;
  47.  
  48. const byte hum[] =      {0x01, 0x03, 0x00, 0x12, 0x00, 0x02, 0x64, 0x0e};
  49. const byte rh[] =       {0x01, 0x03, 0x00, 0x12, 0x00, 0x01, 0x24, 0x0f};
  50. const byte condutiv[] = {0x01, 0x03, 0x00, 0x15, 0x00, 0x01, 0x95, 0xCE};
  51. const byte ph[] =       {0x01, 0x03, 0x00, 0x06, 0x00, 0x01, 0x64, 0x0B};
  52. const byte nitro[] =    {0x01, 0x03, 0x00, 0x1E, 0x00, 0x01, 0xE4, 0x0C};
  53. const byte phos[] =     {0x01, 0x03, 0x00, 0x1F, 0x00, 0x01, 0xB5, 0xCC};
  54. const byte pota[] =     {0x01, 0x03, 0x00, 0x20, 0x00, 0x01, 0x85, 0xC0};
  55.  
  56. //const byte code[]= {0x01, 0x03, 0x00, 0x1e, 0x00, 0x03, 0x65, 0xCD};
  57. //const byte sens[] = {0x01, 0x03, 0x00, 0x00, 0x00, 0x07, 0x04, 0x08};
  58.  
  59.  
  60. byte values[11];
  61. int val_hum = 0;
  62. int val_temp = 0;
  63. float val_ph = 0;
  64.  
  65. int val_con, val_nitro, val_phos, val_pota;
  66. int val_rh;
  67. String humid, temper, soilph, nitrogen, posf, kalium;
  68.  
  69. static uint8_t npkAddr = 1;
  70.  
  71.  
  72. /*=========================================================================================================VOID SETUP===================================================================================*/
  73. void setup()
  74. {
  75.   delay(100);
  76.   pinMode(pinLed, OUTPUT);
  77.   Serial.begin(115200);
  78.   delay(100);
  79.   WiFi.mode(WIFI_STA);
  80.   WiFi.begin(ssid, password);
  81.   int timeout = 10 * 4; // 10 seconds
  82.   while (WiFi.status() != WL_CONNECTED  && (timeout-- > 0)) {
  83.     delay(250);
  84.   }
  85.   Serial.println("");
  86.  
  87.   if (WiFi.status() != WL_CONNECTED) {
  88.     Serial.println("Failed to connect");
  89.   }
  90.   //Serial.print("WiFi connected in: ");
  91.   //Serial.print(millis());
  92.   Serial.print(ssid);
  93.   Serial.print(":");
  94.   Serial.println(WiFi.localIP());
  95.   myIP = WiFi.localIP();
  96.   String statIP = String(myIP);
  97.   tampil_text("IP", statIP);
  98.   Serial.println(statIP);
  99.   Serial.println(myIP);
  100.   delay(100);
  101. }
  102.  
  103. /*============================================================================================================VOID LOOP================================================================================*/
  104.  
  105. void loop() {
  106.  
  107. //-------------------------------------task 1 -----------------------------------------------
  108.   cur_time = millis();
  109.   if (cur_time - old_time >= 3000) {
  110.     Serial.println("baca Sensor");
  111.     serial_rs485();
  112.     for (int i = 0; i < 5; i++) {
  113.       baca_hum();
  114.       delay(250);
  115.     }
  116.  
  117.     serial_gps();
  118.  
  119.     for (int i = 0; i < 5; i++) {
  120.       read_gps();
  121.       delay(250);
  122.     }
  123.  
  124.     old_time = millis();
  125.  
  126.   }
  127.  
  128. //-------------------------------------task 2 -----------------------------------------------
  129.  
  130.   if ((millis() - refresh_timer) > REFRESH_TIME) { //IMPORTANT do not have serial print commands in the loop without a delay
  131.     // or an if statement with a timer condition like this one.
  132.  
  133.     //potValue = analogRead(volt);  // Read the analog pin
  134.     //voltageGraph = map(potValue, 0, 4095, 0, 100);
  135.     //Serial.print("volt  ");
  136.     //Serial.println(voltageGraph);
  137.     counter++;
  138.     val_max = counter;
  139.     Serial.println(val_max);
  140.     tampil_text("statssid", ssid);
  141.     tampil_text("twea", "35");
  142.     tampil_text("tweh", "79");
  143.     kirim_val("jtemp", "35");
  144.     kirim_slider("jtemp", 3);
  145.     String Moisture = String(val_hum);
  146.     //String Soiltemp = String(val_temp);
  147.     //String con = String (val_rh);
  148.     /*
  149.  
  150.       tampil_text("tp1", Moisture); //hum
  151.       tampil_text("tp2", Soiltemp); //val_temp
  152.       tampil_text("tp3", soilph); //value 8
  153.       tampil_text("tp4", con); // value tds
  154.       tampil_text("t7", nitrogen); // nitrogen = String (values[8]);
  155.       tampil_text("t8", posf); //String posf = String (values[i]);
  156.       tampil_text("t9", kalium); //String kalium = String (values[i]);*/
  157.     tampil_text("th1", Moisture);
  158.     tampil_text("th2", Moisture);
  159.     tampil_text("th3", Moisture);
  160.     tampil_text("th4", Moisture);
  161.     tampil_text("th5", Moisture);
  162.     tampil_text("th6", Moisture);
  163.  
  164.     kirim_val("j0", Moisture);
  165.     kirim_val("jn", Moisture);
  166.     kirim_val("jp", Moisture);
  167.     kirim_val("jk", Moisture);
  168.     kirim_val("jth", Moisture);
  169.     kirim_val("jtds", Moisture);
  170.     kirim_val("jtur", Moisture);
  171.  
  172.  
  173.     kirim_val("h0", Moisture);
  174.     kirim_val("h1", Moisture);
  175.     kirim_val("h2", Moisture);
  176.     kirim_val("h3", Moisture);
  177.  
  178.     kirim_val("z0", Moisture);
  179.     kirim_val("z1", Moisture);
  180.     kirim_val("z2", Moisture);
  181.     kirim_val("z3", Moisture);
  182.     kirim_val("zf", Moisture);
  183.  
  184.     kirim_gauge("z0", val_max);
  185.     kirim_gauge("z1", val_max);
  186.     kirim_gauge("z2", val_max);
  187.     kirim_gauge("z3", val_max);
  188.     kirim_gauge("zf", val_max);
  189.  
  190.     kirim_slider("j0", val_max);
  191.     kirim_slider("jn", val_max);
  192.     kirim_slider("jp", val_max);
  193.     kirim_slider("jk", val_max);
  194.     kirim_slider("jth", val_max);
  195.     kirim_slider("jtds", val_max);
  196.     kirim_slider("jtur", val_max);
  197.  
  198.     kirim_slider("h0", val_max);
  199.     kirim_slider("h1", val_max);
  200.     kirim_slider("h2", val_max);
  201.     kirim_slider("h3", val_max);
  202.  
  203.  
  204.  
  205.     tampil_text("tssn", Moisture);
  206.     kirim_val("tssn", Moisture);
  207.     //kirim_slider("tssn", Moisture);
  208.     kirim_wave(val_max);
  209.  
  210.     refresh_timer = millis();  // Set the timer equal to millis, create a time stamp to start over the "delay"
  211.     //old_time = millis();
  212.  
  213.   }
  214. }
  215.  
  216. /*===================================================================================================================END  VOID LOOP =========================================================================*/
  217.  
  218. void serial_rs485() {
  219.   Serial1.begin(4800, SERIAL_8N1, RXD_RS485, TXD_RS485);
  220.   delay(500);
  221. }
  222.  
  223. void serial_gps() {
  224.   Serial1.begin(9600, SERIAL_8N1, RXD_GPS, TXD_GPS);
  225.   delay(500);
  226. }
  227. void read_gps() {
  228.   while (Serial1.available() > 0)
  229.     if (gps.encode(Serial1.read()))
  230.       displayInfo();
  231.  
  232.   if (millis() > 5000 && gps.charsProcessed() < 10)
  233.   {
  234.     Serial.println(F("No GPS detected: check wiring."));
  235.     while (true);
  236.   }
  237.   if (buf_detik != detik) {
  238.     String str_buf_date = "";
  239.     String str_buf_time = "";
  240.  
  241.     String str_tgl = "";
  242.     String str_bln = "";
  243.  
  244.     String str_jam = "";
  245.     String str_menit = "";
  246.     String str_detik = "";
  247.  
  248.     str_bln = bulan < 10 ? "0" + String(bulan) : String(bulan);
  249.     str_tgl = tanggal < 10 ? "0" + String(tanggal) : String(tanggal);
  250.  
  251.     str_buf_date = str_bln + "/" + str_tgl + "/" + String(tahun) + " ";
  252.     str_date = str_buf_date;
  253.  
  254.     Serial.print(" tanggal/jam: ");
  255.     Serial.print(str_date);
  256.     tampil_text("t0", str_date);
  257.  
  258.  
  259.     str_detik = detik < 10 ? "0" + String(detik) : String(detik);
  260.     str_menit = menit < 10 ? "0" + String(menit) : String(menit);
  261.     str_jam = jam < 10 ? "0" + String(jam) : String(jam);
  262.  
  263.  
  264.     str_buf_time = str_jam + ":" + str_menit + ":" + str_detik;
  265.     str_time = str_buf_time;
  266.     Serial.print(str_time);
  267.     Serial.println();
  268.     tampil_text("t1", str_time);
  269.     buf_detik = detik;
  270.  
  271.   }
  272. }
  273.  
  274. void displayInfo() {
  275.  
  276.   if (gps.date.isValid())
  277.   {
  278.     bulan = gps.date.month();
  279.     tanggal = gps.date.day();
  280.     tahun = gps.date.year();
  281.  
  282.   }
  283.   else
  284.   {
  285.     Serial.print(F("INVALID"));
  286.   }
  287.  
  288.   if (gps.time.isValid())
  289.   {
  290.     jam =  gps.time.hour();
  291.     detik = gps.time.second();
  292.     menit = gps.time.minute();
  293.  
  294.     //convert to local zone, indonesia + 7
  295.     jam = jam + 7;
  296.     if (jam >= 24 ) {
  297.       jam = jam - 24;
  298.     }
  299.   }
  300.   else
  301.   {
  302.     Serial.print(F("INVALID"));
  303.   }
  304.   String str_buf_lat = "";
  305.   String str_buf_lon = "";
  306.   String str_buf_date = "";
  307.   String str_buf_time = "";
  308.   Serial.print(F("Location: "));
  309.   if (gps.location.isValid())
  310.   {
  311.     str_buf_lat = String(gps.location.lat(), 6);
  312.     str_buf_lon = String(gps.location.lng(), 6);
  313.     Serial.print(str_buf_lat); Serial.print(",");
  314.     Serial.println(str_buf_lon);
  315.     tampil_text("tkx", str_buf_lat);
  316.     tampil_text("tky", str_buf_lon);
  317.   }
  318.   else
  319.   {
  320.     Serial.print(F("INVALID"));
  321.     tampil_text("tkx", "LOST");
  322.     tampil_text("tky", "SIGNAL");
  323.   }
  324. }
  325.  
  326. /*====================================================================================================*/
  327.  
  328. void baca_hum() {
  329.  
  330.   delay(10);
  331.   if (Serial1.write(hum, sizeof(hum)) == 8) {
  332.     for (byte i = 0; i < 9; i++) {
  333.       values[i] = Serial1.read();
  334.       Serial.print(values[i], HEX);
  335.       Serial.print(",");
  336.     }
  337.     Serial.println();
  338.   }
  339.   Serial.print(values[3], HEX);
  340.   Serial.println(values[4], HEX);
  341.  
  342.   Serial.print(values[5], HEX);
  343.   Serial.println(values[6], HEX);
  344.  
  345.   val_hum = (values[3] << 8);// | values[4];
  346.   val_temp = (values[5] << 8);// | values[6];
  347.   String Moisture = String(val_hum, HEX);
  348.   String Soiltemp = String(val_temp, HEX);
  349.  
  350.   Serial.print("hum: ");
  351.   Serial.println(val_hum);
  352.   tampil_text("tp1", Moisture); //hum
  353.   Serial.print("temp: ");
  354.   Serial.println(val_temp);
  355.   tampil_text("tp3", soilph); //value 8
  356.  
  357. }
  358.  
  359. byte baca_rh() {
  360.   delay(10);
  361.   if (Serial1.write(rh, sizeof(rh)) == 8) {
  362.     for (byte i = 0; i < 7; i++) {
  363.       values[i] = Serial1.read();
  364.       Serial.print(values[i], HEX);
  365.       Serial.print(",");
  366.       val_rh = (values[i], HEX);
  367.       String con = String (val_rh);
  368.       tampil_text("tp4", con); // value tds
  369.  
  370.     }
  371.     Serial.println();
  372.   }
  373.   return values[4];
  374. }
  375.  
  376. byte baca_con() {
  377.   delay(10);
  378.   if (Serial1.write(condutiv, sizeof(condutiv)) == 8) {
  379.     for (byte i = 0; i < 7; i++) {
  380.       values[i] = Serial1.read();
  381.  
  382.       Serial.print(values[i], HEX);
  383.       Serial.print(",");
  384.     }
  385.     Serial.println();
  386.   }
  387.   return values[4];
  388. }
  389.  
  390. byte baca_ph() {
  391.   delay(100);
  392.   if (Serial1.write(ph, sizeof(ph)) == 8) {
  393.     for (byte i = 0; i < 7; i++) {
  394.       values[i] = Serial1.read();
  395.       Serial.print(values[i], HEX);
  396.       String soilph = String (values[i], HEX);
  397.       tampil_text("tp3", soilph); // ph = String (values[8]);
  398.  
  399.       Serial.print(",");
  400.     }
  401.     Serial.println();
  402.   }
  403.   return values[4];
  404. }
  405.  
  406. byte baca_nitro() {
  407.   delay(10);
  408.   if (Serial1.write(nitro, sizeof(nitro)) == 8) {
  409.     for (byte i = 0; i < 7; i++) {
  410.       values[i] = Serial1.read();
  411.       Serial.print(values[i], HEX);
  412.       String nitrogen = String (values[i], HEX);
  413.       tampil_text("t7", nitrogen); // nitrogen = String (values[8]);
  414.  
  415.       Serial.print(",");
  416.     }
  417.     Serial.println();
  418.   }
  419.   return values[4];
  420. }
  421.  
  422. byte baca_phos() {
  423.   delay(10);
  424.   if (Serial1.write(phos, sizeof(phos)) == 8) {
  425.     for (byte i = 0; i < 7; i++) {
  426.       values[i] = Serial1.read();
  427.       Serial.print(values[i], HEX);
  428.       String posf = String (values[i], HEX);
  429.       tampil_text("t8", posf); //String posf = String (values[i]);
  430.  
  431.       Serial.print(",");
  432.     }
  433.     Serial.println();
  434.   }
  435.   return values[4];
  436. }
  437.  
  438. byte baca_pota() {
  439.   delay(10);
  440.   if (Serial1.write(pota, sizeof(pota)) == 8) {
  441.     for (byte i = 0; i < 7; i++) {
  442.       values[i] = Serial1.read();
  443.       Serial.print(values[i], HEX);
  444.       String kalium = String (values[i], HEX);
  445.       tampil_text("t9", kalium); //String kalium = String (values[i]);
  446.  
  447.       Serial.print(",");
  448.     }
  449.     Serial.println();
  450.   }
  451.   return values[4];
  452. }
  453.  
  454.  
  455.  
  456. void tampil_text(String _add_txt, String _txt_display) {
  457.   String buf_txt = _add_txt + ".txt="  + "\"" + _txt_display + "\"";
  458.   Serial1.print(buf_txt);
  459.   Serial1.write(0xff);
  460.   Serial1.write(0xff);
  461.   Serial1.write(0xff);
  462. }
  463.  
  464. void kirim_val(String _add_slide, String _txt_display) {
  465.   String buf_slider = _add_slide + ".val="  + "\"" + _txt_display + "\"";
  466.   Serial1.print(buf_slider);
  467.   Serial1.write(0xff);
  468.   Serial1.write(0xff);
  469.   Serial1.write(0xff);
  470. }
  471. void kirim_gauge(String _add_gauge, int _gauge_display) {
  472.   String warna_jingga = _add_gauge + ".pco=64520";
  473.   String warna_merah = _add_gauge + ".pco=63488";
  474.   String warna_kuning = _add_gauge + ".pco=65519";
  475.   String warna_hijau = _add_gauge + ".pco=34784";
  476.   String warna_bg_green = _add_gauge + ".pco=1024";
  477.   int sensgauge = constrain(_gauge_display, 0, 255); //(buf_senval,0,2048);
  478.   int val_gauge = map(sensgauge, 0, 255, 0, 180); //(sens, 300, 2048, 50, 0);
  479.   Serial1.print("valgauge");
  480.   Serial1.print(val_gauge);
  481.   Serial1.print(_add_gauge);
  482.   Serial1.print(".val=");
  483.   Serial1.print(val_gauge);
  484.   Serial1.write(0xff);
  485.   Serial1.write(0xff);
  486.   Serial1.write(0xff);
  487.   //String buf_gauge = _add_gauge + ".val="  + "\"" + val_gauge+ "\"";
  488.   //Serial1.print(buf_gauge);
  489.   if (val_gauge <= 15) { //}for (val_min > 80; val_min <= 100; val_min++){
  490.     Serial1.print(warna_merah);
  491.     Serial1.write(0xff);
  492.     Serial1.write(0xff);
  493.     Serial1.write(0xff);
  494.   } else if ((val_gauge > 15) && (val_gauge <= 37)) {
  495.     Serial1.print(warna_jingga);
  496.     Serial1.write(0xff);
  497.     Serial1.write(0xff);
  498.     Serial1.write(0xff);
  499.   } else if ((val_gauge > 37) && (val_gauge <= 60)) {
  500.     Serial1.print(warna_kuning);
  501.     Serial1.write(0xff);
  502.     Serial1.write(0xff);
  503.     Serial1.write(0xff);
  504.   } else if ((val_gauge > 60) && (val_gauge <= 80)) {
  505.     Serial1.print(warna_hijau);
  506.     Serial1.write(0xff);
  507.     Serial1.write(0xff);
  508.     Serial1.write(0xff);
  509.   } else if ((val_gauge > 80) && (val_gauge <= 100)) {
  510.     Serial1.print(warna_bg_green);
  511.     Serial1.write(0xff);
  512.     Serial1.write(0xff);
  513.     Serial1.write(0xff);
  514.   } delay(100);
  515. }
  516.  
  517.  
  518. void kirim_slider(String _add_col, int val_sen) {
  519.   //String warna_biru = _add_col + ".pco=64520";
  520.   String warna_merah = _add_col + ".pco=63488";
  521.   String warna_kuning = _add_col + ".pco=65519";
  522.   String warna_hijau = _add_col + ".pco=34784";
  523.   String warna_bg_green = _add_col + ".pco=1024";
  524.  
  525.   //int buf_senval = val_sen.toInt();
  526.   int sens = constrain(val_sen, 0, 400); //(buf_senval,0,2048);
  527.   int val_min = map(sens, 0, 400, 0, 100); //(sens, 300, 2048, 50, 0);
  528.   //String buf_slider = _add_col + ".val="  + "\"" + val_min+ "\"";
  529.   //Serial1.print(buf_slider);
  530.   Serial1.print(_add_col);
  531.   Serial1.print(".val=");
  532.   Serial1.print(val_min);
  533.   Serial1.write(0xff);
  534.   Serial1.write(0xff);
  535.   Serial1.write(0xff);
  536.   if (val_min <= 20) { //}for (val_min > 80; val_min <= 100; val_min++){
  537.     Serial1.print(warna_merah);
  538.     Serial1.write(0xff);
  539.     Serial1.write(0xff);
  540.     Serial1.write(0xff);
  541.   } else if ((val_min > 20) && (val_min <= 40)) {
  542.     Serial1.print(warna_hijau);
  543.     Serial1.write(0xff);
  544.     Serial1.write(0xff);
  545.     Serial1.write(0xff);
  546.   } else if ((val_min > 40) && (val_min <= 60)) {
  547.     Serial1.print(warna_bg_green);
  548.     Serial1.write(0xff);
  549.     Serial1.write(0xff);
  550.     Serial1.write(0xff);
  551.   } else if ((val_min > 60) && (val_min <= 80)) {
  552.     Serial1.print(warna_kuning);
  553.     Serial1.write(0xff);
  554.     Serial1.write(0xff);
  555.     Serial1.write(0xff);
  556.   } else if ((val_min > 80) && (val_min <= 100)) {
  557.     Serial1.print(warna_merah);
  558.     Serial1.write(0xff);
  559.     Serial1.write(0xff);
  560.     Serial1.write(0xff);
  561.   } delay(100);
  562. }
  563.  
  564. void kirim_wave(int wave_val) {
  565.   int senswave = constrain(wave_val, 0, 255); //(buf_senval,0,2048);
  566.   int val_wave = map(senswave, 0, 255, 0, 255); //(sens, 300, 2048, 50, 0);
  567.   Serial1.print("valwave");
  568.   Serial1.print(val_wave);
  569.   //Serial1.print("add 1,1," + val_wave);
  570.   String tosend = "add ";
  571.   tosend += 1;//id
  572.   tosend += ",";
  573.   tosend += 1; //channel
  574.   tosend += ",";
  575.   tosend += val_wave;
  576.   Serial1.print(tosend);
  577.   Serial1.write(0xff);
  578.   Serial1.write(0xff);
  579.   Serial1.write(0xff);
  580.   delay(600);
  581. }
  582.  
  583.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!