API tools faq
paste
Guest User

Untitled

a guest
Sep 27th, 2012
62
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 65.97 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Booting Linux on physical CPU 0
  2. <6>[ 0.000000] Initializing cgroup subsys cpu
  3. <5>[ 0.000000] Linux version 3.0.43-cyanogenmod (owner@wmon) (gcc version 4.4.3 (GCC) ) #3 SMP PREEMPT Thu Sep 27 02:43:46 EDT 2012
  4. <4>[ 0.000000] CPU: ARMv7 Processor [511f04d0] revision 0 (ARMv7), cr=10c5387d
  5. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. <4>[ 0.000000] Machine: SAMSUNG M2_ATT
  7. <6>[ 0.000000] m0 size 8b00000 m1 start 8f200000
  8. <3>[ 0.000000] heap->name mm, mb->start c0000000
  9. <6>[ 0.000000] memory pool 3 (start f92ff000 size 6d00000) initialized
  10. <3>[ 0.000000] Reserving memory at address ea000000 size: 100000
  11. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  12. <6>[ 0.000000] socinfo_init: v6, id=87, ver=3.1, raw_id=1717, raw_ver=4, hw_pla-t=1, hw_pla-t_ver=65536
  13. <6>[ 0.000000] accessory_chip=0 hw_pla-t_subtype=0
  14. <6>[ 0.000000] sec_getlog_supply_meminfo: 40000000 80000000 0 0
  15. <4>[ 0.000000] Zone PFN ranges:
  16. <4>[ 0.000000] Normal 0x00080200 -> 0x000ab700
  17. <4>[ 0.000000] HighMem 0x000ab700 -> 0x000fffff
  18. <4>[ 0.000000] Movable zone start PFN for each node
  19. <4>[ 0.000000] early_node_map[6] active PFN ranges
  20. <4>[ 0.000000] 0: 0x00080200 -> 0x00088d00
  21. <4>[ 0.000000] 0: 0x0008f200 -> 0x0008f700
  22. <4>[ 0.000000] 0: 0x00090000 -> 0x0009fe00
  23. <4>[ 0.000000] 0: 0x000a9700 -> 0x000bff00
  24. <4>[ 0.000000] 0: 0x000bffff -> 0x000ea000
  25. <4>[ 0.000000] 0: 0x000ea100 -> 0x000f92ff
  26. <7>[ 0.000000] On node 0 totalpages: 428032
  27. <7>[ 0.000000] Normal zone: 1386 pages used for memmap
  28. <7>[ 0.000000] Normal zone: 0 pages reserved
  29. <7>[ 0.000000] Normal zone: 108694 pages, LIFO batch:31
  30. <7>[ 0.000000] HighMem zone: 2488 pages used for memmap
  31. <7>[ 0.000000] HighMem zone: 315464 pages, LIFO batch:31
  32. <6>[ 0.000000] allocating 11304960 bytes at c2356000 (82556000 physical) for fb
  33. <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c2e21000 s9920 r8192 d14656 u32768
  34. <7>[ 0.000000] pcpu-alloc: s9920 r8192 d14656 u32768 alloc=8*4096
  35. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  36. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 424158
  37. <5>[ 0.000000] Kernel command line: androidboot.hardware=qcom user_debug=31 sec_log=0x80000@0x88d00008 sec_dbg=0x40000@0x88d90004 sec_debug.reset_reason=0x1a2b3c00 etb_buf=0x4000@0x8fffb9c0 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 cordon=b24778180f80aa22ad871f2255cba8e5 loglevel=4 samsung.hardware=SGH-I747 androidboot.emmc_checksum=3 androidboot.bootloader=I747UCALG1 androidboot.nvdata_backup=0 androidboot.boot_recovery=0 level=0x574f4c44 sec_pvs=0 androidboot.emmc=true androidboot.serialno=7c1b7113 androidboot.baseband=msm
  38. <0>[ 0.000000] sec_dbg_setup: str=@0x88d90004
  39. <0>[ 0.000000] sec_dbg_setup: secdbg_paddr = 0x88d90004
  40. <0>[ 0.000000] sec_dbg_setup: secdbg_size = 0x40000
  41. <0>[ 0.000000] etb_buf_setup: str=@0x8fffb9c0
  42. <0>[ 0.000000] etb_buf_setup: secdbg_paddr = 0x8fffb9c0
  43. <0>[ 0.000000] etb_buf_setup: secdbg_size = 0x4000
  44. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  45. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  46. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  47. <6>[ 0.000000] Memory: 139MB 5MB 254MB 360MB 672MB 241MB = 1672MB total
  48. <5>[ 0.000000] Memory: 1667024k/1937356k available, 45104k reserved, 1271808K highmem
  49. <5>[ 0.000000] Virtual kernel memory layout:
  50. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  51. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  52. <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  53. <5>[ 0.000000] vmalloc : 0xe5800000 - 0xfe000000 ( 392 MB)
  54. <5>[ 0.000000] lowmem : 0xc0000000 - 0xe5000000 ( 592 MB)
  55. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  56. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  57. <5>[ 0.000000] .init : 0xc0008000 - 0xc0100000 ( 992 kB)
  58. <5>[ 0.000000] .text : 0xc0100000 - 0xc0bd46fc (11090 kB)
  59. <5>[ 0.000000] .data : 0xc0c00000 - 0xc0cd3448 ( 846 kB)
  60. <5>[ 0.000000] .bss : 0xc0cd346c - 0xc11312fc (4472 kB)
  61. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  62. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  63. <6>[ 0.000000] NR_IRQS:817
  64. <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  65. <6>[ 0.000000] Console: colour dummy device 80x30
  66. <6>[ 0.150221] Calibrating delay using timer specific routine.. 13.54 BogoMIPS (lpj=67714)
  67. <6>[ 0.150282] pid_max: default: 32768 minimum: 301
  68. <6>[ 0.150618] Mount-cache hash table entries: 512
  69. <6>[ 0.151655] Initializing cgroup subsys debug
  70. <6>[ 0.151686] Initializing cgroup subsys cpuacct
  71. <6>[ 0.151747] Initializing cgroup subsys freezer
  72. <6>[ 0.151808] CPU: Testing write buffer coherency: ok
  73. <6>[ 0.151899] ftrace: allocating 27289 entries in 81 pages
  74. <4>[ 0.153334] ------------[ cut here ]------------
  75. <4>[ 0.153395] WARNING: at kernel/trace/ftrace.c:1496 ftrace_bug+0x118/0x1cc()
  76. <4>[ 0.153395] Modules linked in:
  77. <4>[ 0.153456] [<c010dea4>] (unwind_backtrace+0x0/0xfc) from [<c0837310>] (dump_stack+0x20/0x24)
  78. <4>[ 0.153486] [<c0837310>] (dump_stack+0x20/0x24) from [<c0174ce8>] (warn_slowpath_common+0x5c/0x74)
  79. <4>[ 0.153517] [<c0174ce8>] (warn_slowpath_common+0x5c/0x74) from [<c0174d2c>] (warn_slowpath_null+0x2c/0x34)
  80. <4>[ 0.153547] [<c0174d2c>] (warn_slowpath_null+0x2c/0x34) from [<c01c9284>] (ftrace_bug+0x118/0x1cc)
  81. <4>[ 0.153609] [<c01c9284>] (ftrace_bug+0x118/0x1cc) from [<c01c9fb4>] (ftrace_process_locs+0x208/0x2f8)
  82. <4>[ 0.153639] [<c01c9fb4>] (ftrace_process_locs+0x208/0x2f8) from [<c001d334>] (ftrace_init+0x17c/0x1c4)
  83. <4>[ 0.153670] [<c001d334>] (ftrace_init+0x17c/0x1c4) from [<c0008ae4>] (start_kernel+0x414/0x480)
  84. <4>[ 0.153700] [<c0008ae4>] (start_kernel+0x414/0x480) from [<8020803c>] (0x8020803c)
  85. <4>[ 0.153761] ---[ end trace da227214a82491b7 ]---
  86. <6>[ 0.153761] ftrace faulted on writing [<c081b8a0>] activity_stats_update+0x14/0xb4
  87. <6>[ 0.154127] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  88. <6>[ 0.160537] Brought up 2 CPUs
  89. <6>[ 0.160567] SMP: Total of 2 processors activated (27.08 BogoMIPS).
  90. <6>[ 0.177018] print_constraints: dummy:
  91. <3>[ 0.177109] rdev_init_debugfs: Error-Bad Function Input
  92. <6>[ 0.177384] NET: Registered protocol family 16
  93. <3>[ 0.177628] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  94. <0>[ 0.180131] sec_debug_init: enable=0
  95. <0>[ 0.180161] sec_debug_init: restart_reason : 0xe580865c
  96. <6>[ 0.180192] socinfo_init: v6, id=87, ver=3.1, raw_id=1717, raw_ver=4, hw_pla-t=1, hw_pla-t_ver=65536
  97. <6>[ 0.180222] accessory_chip=0 hw_pla-t_subtype=0
  98. <6>[ 0.180222] meminfo_init: smem ram ptable found: ver: 0 len: 6
  99. <6>[ 0.180253] Found 2 memory banks grouped into 16 memory regions
  100. <6>[ 0.180344] msm_tsens_early_init: done
  101. <6>[ 0.180375] msm_rpm_init: RPM firmware 3.0.16843271
  102. <4>[ 0.198260] rpm-regulator driver has probed .
  103. <6>[ 0.199816] rcg_clk_handoff: sdc1_clk rate=48000000
  104. <6>[ 0.199908] rcg_clk_handoff: mdp_clk rate=200000000
  105. <6>[ 0.202502] saw_probe: id=0, name=8921_s5
  106. <6>[ 0.202929] saw_probe: id=1, name=8921_s6
  107. <6>[ 0.203357] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
  108. <6>[ 0.203662] pm8921_probe: PMIC revision 1: F4
  109. <6>[ 0.203692] pm8921_probe: PMIC revision 2: 06
  110. <6>[ 0.203723] pm8921_probe: PMIC version: PM8921 rev 3.0
  111. <6>[ 0.203723] pm8921_probe: PMIC Restart Reason: Triggered from SMPL (sudden momentary power loss)
  112. <6>[ 0.205981] pm_gpio_probe: OK: base=152, ngpio=44
  113. <6>[ 0.206378] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  114. <6>[ 0.212055] gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label=ext_otg_sw_en
  115. <6>[ 0.227285] ram_console: got buffer at bff00000, size ff000
  116. <6>[ 0.227437] ram_console: found existing buffer, size 6596, start 6596
  117. <6>[ 0.252922] console [ram0] enabled
  118. <3>[ 0.253654] [msm8960_init_cam:2992]setting done!!
  119. <1>[ 0.255791] select_freq_plan: ACPU PVS: Fast
  120. <6>[ 0.255913] select_freq_plan: Max ACPU freq: 1512000 KHz
  121. <6>[ 0.259301] cpufreq_table_init: CPU0: 12 scaling frequencies supported.
  122. <6>[ 0.259331] cpufreq_table_init: CPU1: 12 scaling frequencies supported.
  123. <6>[ 0.259331] samsung sys class init.
  124. <6>[ 0.259362] samsung sys class end.
  125. <6>[ 0.259880] tsp 1.8V on is finished.
  126. <6>[ 0.260491] tsp 3.3V on is finished.
  127. <6>[ 0.271875] samsung_m2_att_init : system rev = 16, Secjack Using
  128. <6>[ 0.272485] [WIFI] system_rev = 16
  129. <6>[ 0.272516] brcm_wlan_init: start
  130. <6>[ 0.272577] brcm_init_wlan_mem: WIFI MEM Allocated
  131. <6>[ 0.276270] sps:REVISION of BAM 0xe5838000 is 0x5.
  132. <6>[ 0.276911] sps is ready.
  133. <6>[ 0.292659] bio: create slab <bio-0> at 0
  134. <6>[ 0.292965] MAX8952 loading!!
  135. <6>[ 0.293209] ION heap vmalloc created
  136. <6>[ 0.293239] ION heap mm created at a0000000 with size 9600000
  137. <6>[ 0.293270] ION heap mm_fw created at 9fe00000 with size 1e0000
  138. <6>[ 0.293300] ION heap mfc created at a9600000 with size 2000
  139. <6>[ 0.293331] ION heap sf created at f9302000 with size 5000000
  140. <6>[ 0.293361] ION heap iommu created
  141. <6>[ 0.293392] ION heap qsecom created at fe302000 with size 1700000
  142. <6>[ 0.293422] ION heap audio created at ffa02000 with size 4cf000
  143. <5>[ 0.293972] pm8xxx_pwm_probe: OK
  144. <5>[ 0.294307] SCSI subsystem initialized
  145. <6>[ 0.294491] usbcore: registered new interface driver usbfs
  146. <6>[ 0.294582] usbcore: registered new interface driver hub
  147. <6>[ 0.294674] usbcore: registered new device driver usb
  148. <6>[ 0.295193] i2c-gpio i2c-gpio.9: using pins 95 (SDA) and 96 (SCL)
  149. <6>[ 0.295345] i2c-gpio i2c-gpio.11: using pins 73 (SDA) and 74 (SCL)
  150. <6>[ 0.295528] i2c-gpio i2c-gpio.16: using pins 48 (SDA) and 47 (SCL)
  151. <6>[ 0.295742] i2c-gpio i2c-gpio.13: using pins 24 (SDA) and 25 (SCL)
  152. <6>[ 0.295925] i2c-gpio i2c-gpio.17: using pins 32 (SDA) and 33 (SCL)
  153. <3>[ 0.296047] i2c i2c-14: Invalid 7-bit I2C address 0x00
  154. <3>[ 0.296200] i2c i2c-14: Can't create device at 0x00
  155. <6>[ 0.296322] i2c-gpio i2c-gpio.14: using pins 12 (SDA) and 13 (SCL)
  156. <3>[ 0.296719] rdev_init_debugfs: Error-Bad Function Input
  157. <4>[ 0.296871] max8952 19-0060: VID0/1 gpio invalid: DVS not available.
  158. <3>[ 0.297390] max8952 19-0060: DVS modes disabled because VID0 and VID1 do not have proper controls.
  159. <6>[ 0.304257] i2c-gpio i2c-gpio.19: using pins 71 (SDA) and 72 (SCL)
  160. <6>[ 0.304990] Advanced Linux Sound Architecture Driver Version 1.0.24.
  161. <6>[ 0.305417] Bluetooth: Core ver 2.16
  162. <6>[ 0.305447] NET: Registered protocol family 31
  163. <6>[ 0.305478] Bluetooth: HCI device and connection manager initialized
  164. <6>[ 0.305478] Bluetooth: HCI socket layer initialized
  165. <6>[ 0.305508] Bluetooth: L2CAP socket layer initialized
  166. <6>[ 0.305539] Bluetooth: SCO socket layer initialized
  167. <6>[ 0.305905] cfg80211: Calling CRDA to update world regulatory domain
  168. <6>[ 0.306119] Switching to clocksource gp_timer
  169. <6>[ 0.324065] NET: Registered protocol family 2
  170. <6>[ 0.324187] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  171. <6>[ 0.324462] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  172. <6>[ 0.325347] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  173. <6>[ 0.326323] TCP: Hash tables configured (established 65536 bind 65536)
  174. <6>[ 0.326354] TCP reno registered
  175. <6>[ 0.326354] UDP hash table entries: 256 (order: 1, 8192 bytes)
  176. <6>[ 0.326384] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  177. <6>[ 0.326720] NET: Registered protocol family 1
  178. <6>[ 0.327025] RPC: Registered named UNIX socket transport module.
  179. <6>[ 0.327025] RPC: Registered udp transport module.
  180. <6>[ 0.327056] RPC: Registered tcp transport module.
  181. <6>[ 0.327056] RPC: Registered tcp NFSv4.1 backchannel transport module.
  182. <6>[ 0.327239] Trying to unpack rootfs image as initramfs...
  183. <6>[ 0.343354] Freeing initrd memory: 340K
  184. <6>[ 0.343567] PMU: registered new PMU device of type 0
  185. <6>[ 0.343750] PMU: registered new PMU device of type 1
  186. <6>[ 0.344208] msm_etb msm_etb: ETB initialized
  187. <6>[ 0.344391] msm_tpiu msm_tpiu: TPIU initialized
  188. <6>[ 0.344544] msm_funnel msm_funnel: FUNNEL initialized
  189. <6>[ 0.345978] msm_etm msm_etm: ETM initialized
  190. <3>[ 0.345978] msm_etm msm_etm: ETM tracing is not enabled beacausesec_debug is not enabled!
  191. <6>[ 0.346162] QDSS initialized
  192. <6>[ 0.346833] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  193. <6>[ 0.347657] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
  194. <6>[ 0.348481] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
  195. <6>[ 0.349549] pil_riva pil_riva: using secure boot
  196. <3>[ 0.351350] smd_channel_probe_worker: allocation table not initialized
  197. <6>[ 0.356691] NET: Registered protocol family 27
  198. <6>[ 0.357179] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
  199. <6>[ 0.358614] modem_8960_init: modem fatal driver init'ed.
  200. <6>[ 0.358766] lpass_fatal_init: lpass SSR driver init'ed.
  201. <5>[ 0.359102] msm_rpm_log_probe: OK
  202. <6>[ 0.360201] sec_getlog_supply_kloginfo: 0xc0d428c4
  203. <4>[ 0.361483] highmem bounce pool size: 64 pages
  204. <6>[ 0.361635] ashmem: initialized
  205. <6>[ 0.370181] fuse init (API version 7.16)
  206. <6>[ 0.370425] msgmni has been set to 772
  207. <6>[ 0.371951] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  208. <6>[ 0.371982] io scheduler noop registered
  209. <6>[ 0.371982] io scheduler deadline registered (default)
  210. <6>[ 0.372043] io scheduler cfq registered
  211. <6>[ 0.372073] io scheduler sio registered
  212. <3>[ 0.372958] mdp_bus_scale_update_request invalid bus handle
  213. <6>[ 0.375400] mipi_dsi base phy_addr = 0x4700000 virt = 0xe5d00000
  214. <6>[ 0.375431] mmss_sfpb base phy_addr = 0x5700000,virt = 0xe5864000
  215. <7>[ 0.375644] Is_There_cmc624 : CMC624 is not there!!!!
  216. <6>[ 0.375980] set_esd_disable is called
  217. <6>[ 0.376255] setting pdata->panel_info.fb_num to 3. type: 8
  218. <6>[ 0.376773] mdp4_dsi_vsync_init: ndx=0
  219. <6>[ 0.379948] FrameBuffer[0] 720x1280 size=11304960 bytes is registered successfully!
  220. <3>[ 0.379978] pm_runtime: fail to wake up
  221. <7>[ 0.380405] Registered led device: lcd-backlight
  222. <6>[ 0.380466] sec_getlog_supply_fbinfo: 0x82556000 736 1280 32 2
  223. <6>[ 0.381626] setting pdata->panel_info.fb_num to 1. type: 7
  224. <6>[ 0.381992] mdp4_dtv_vsync_init: ndx=0
  225. <6>[ 0.382267] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  226. <3>[ 0.382542] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group e46f1408
  227. <6>[ 0.382633] hdmi_msm hdmi_msm.1: HDMI HPD: ON
  228. <6>[ 0.382939] setting pdata->panel_info.fb_num to 1. type: 10
  229. <3>[ 0.383061] Inside writeback_driver_init
  230. <3>[ 0.383335] Inside writeback_probe
  231. <6>[ 0.383885] FrameBuffer[2] 1920x1080 size=0 bytes is registered successfully!
  232. <6>[ 0.451670] mipi_samsung_manufacture_id: manufacture_id1=a2
  233. <6>[ 0.451793] mipi_samsung_manufacture_id: manufacture_id2=60
  234. <6>[ 0.451854] mipi_samsung_manufacture_id: manufacture_id3=90
  235. <6>[ 0.451884] mipi_samsung_manufacture_id: manufacture_id=11ba6090
  236. <6>[ 0.451884] first time mpt read
  237. <6>[ 0.452586] read_reg : D3[24] : 00 00 10 02 .0d 09 00 02 .00 00 0b 00 .0e 09 00 01 .00 00 09 00 .0d 09 00 00 .00 00 00 00 .
  238. <6>[ 0.452617] second time mpt read
  239. <6>[ 0.453319] read_reg : D3[24] : 00 00 10 02 .0d 09 00 02 .00 00 0b 00 .0e 09 00 01 .00 00 09 00 .0d 09 00 00 .00 00 00 00 .
  240. <6>[ 0.453319] MTP data is used from first read mtp
  241. <6>[ 0.453349] mipi_samsung_disp_on MTP is determined : 1
  242. <6>[ 0.453349] MTP: 00 00 10 02 0d 09 00 02 00 00 0b 00 0e 09 00 01 00 00 09 00 0d 09 00 00
  243. <6>[ 0.453380] gamma_cell_determine ldi_revision:96
  244. <6>[ 0.453532] generate_gray_scale end
  245. <6>[ 0.453715] Select 4.8 = 0(60)
  246. <6>[ 0.587761] set_esd_enable is called
  247. <6>[ 0.659209]
  248. <6>[ 0.659209] msm_vidc_enc: Inside vid_enc_init()
  249. <6>[ 0.659331]
  250. <6>[ 0.659331] msm_vidc_enc: Inside vid_enc_vcd_init()
  251. <6>[ 0.659636] create mhl sysfile
  252. <6>[ 0.660003] input: sii9234_rcp as /devices/virtual/input/input0
  253. <6>[ 0.735449] msm_serial: driver initialized
  254. <6>[ 0.735632] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  255. <6>[ 0.886616] msm_serial_hs module loaded
  256. <6>[ 0.886708] msm_serial_hsl: detected port #0
  257. <6>[ 0.886708] msm_serial_hsl_probe: Found wakeup gpio 23
  258. <6>[ 0.886891] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a MSM
  259. <6>[ 0.886952] msm_serial_hsl: console setup on port #0
  260. <6>[ 1.015992] console [ttyHSL0] enabled
  261. <6>[ 1.086616] set_esd_enable_work_func is called
  262. <6>[ 1.126751] msm_serial_hsl: driver initialized
  263. <6>[ 1.127849] msm_rotator_probe: rotator_hw_revision=2
  264. <6>[ 1.131664] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  265. <6>[ 1.132702] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  266. <6>[ 1.133526] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  267. <6>[ 1.138654] brd: module loaded
  268. <6>[ 1.140943] loop: module loaded
  269. <1>[ 1.141095] pmem: pmem_setup: unable to register pmem driver(pmem_audio) - zero size passed in!
  270. <4>[ 1.148939] android_pmem: probe of android_pmem.4 failed with error -1
  271. <4>[ 1.149427] TZCOM: Enabled clock
  272. <6>[ 1.150099] Loading pn544 driver
  273. <6>[ 1.150160] pn544_probe : IRQ num 394
  274. <6>[ 1.150495] pn544_probe : requesting IRQ 394
  275. <6>[ 1.150892] input: fsa9485 as /devices/platform/i2c-gpio.11/i2c-11/11-0025/input/input1
  276. <6>[ 1.150892] fsa9485_reg_init is called
  277. <6>[ 1.153364] fsa9485 11-0025: fsa9485_reg_init dev ID: 0x0
  278. <4>[ 1.153547] i2c-core: driver [fsa9485] using legacy resume method
  279. <6>[ 1.153883] i2c i2c-12: mpu_probe: 0
  280. <6>[ 1.153914] <6>mldl_cfg:Reset MPU6050 B1
  281. <6>[ 1.261712] i2c i2c-12: Installing irq using 357
  282. <6>[ 1.261712] i2c i2c-12: Module Param interface = mpuirq
  283. <6>[ 1.262078] i2c i2c-12: inv_mpu_register_slave: +mpu6050 Type 1: Addr: 68 IRQ: 357, Adapt: 12
  284. <6>[ 1.262414] i2c i2c-12: Installing accelirq irq using 357
  285. <4>[ 1.262810] i2c-core: driver [mpu6050] using legacy suspend method
  286. <4>[ 1.262841] i2c-core: driver [mpu6050] using legacy resume method
  287. <6>[ 1.262871] mpu_init: Probe name mpu6050
  288. <6>[ 1.263024] i2c i2c-12: ak8975_mod_probe: ak8975_mod
  289. <6>[ 1.263055] i2c i2c-12: inv_mpu_register_slave: +ak8975 Type 2: Addr: c IRQ: 356, Adapt: 12
  290. <6>[ 1.264642] i2c i2c-12: Installing compassirq irq using 356
  291. <6>[ 1.264886] ak8975_mod_init: Probe name ak8975_mod
  292. <6>[ 1.265130] a2220_probe - finish
  293. <6>[ 1.265160] thread_start
  294. <4>[ 1.265191] i2c-core: driver [audience_a2220] using legacy suspend method
  295. <4>[ 1.265191] i2c-core: driver [audience_a2220] using legacy resume method
  296. <3>[ 1.326995] cm36651_setup_reg: initial proximity value = 2
  297. <6>[ 1.332458] cm36651_setup_reg is success.
  298. <6>[ 1.333038] input: proximity_sensor as /devices/virtual/input/input2
  299. <6>[ 1.333404] input: light_sensor as /devices/virtual/input/input3
  300. <6>[ 1.333587] cm36651_i2c_probe is success.
  301. <6>[ 1.333648] init tzic
  302. <6>[ 1.334014] sec_jack:sec_jack_probe : Registering jack driver
  303. <6>[ 1.334167] input: sec_jack as /devices/virtual/input/input4
  304. <6>[ 1.428048] a2220_bootup_init: starting to load image (2273 passes)...
  305. <6>[ 1.437295] tabla_device_init : Tabla version 2 initialized
  306. <6>[ 1.437936] tabla_device_init : Tabla version 2 initialized
  307. <6>[ 1.437967] probe for other slaves devices of tabla
  308. <6>[ 1.437997] probe for other slaves devices of tabla
  309. <6>[ 1.438028] probe for other slaves devices of tabla
  310. <4>[ 1.438119] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  311. <4>[ 1.438119] i2c-core: driver [tabla-i2c-core] using legacy resume method
  312. <6>[ 1.439066] SCSI Media Changer driver v0.25
  313. <6>[ 1.440103] PPP generic driver version 2.4.2
  314. <6>[ 1.440317] PPP Deflate Compression module registered
  315. <6>[ 1.440317] PPP BSD Compression module registered
  316. <6>[ 1.441049] PPP MPPE Compression module registered
  317. <6>[ 1.441080] NET: Registered protocol family 24
  318. <6>[ 1.441080] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  319. <6>[ 1.441110] CSLIP: code copyright 1989 Regents of the University of California.
  320. <6>[ 1.441477] tun: Universal TUN/TAP device driver, 1.6
  321. <6>[ 1.442240] usbcore: registered new interface driver asix
  322. <6>[ 1.442301] usbcore: registered new interface driver cdc_ether
  323. <6>[ 1.442362] usbcore: registered new interface driver net1080
  324. <6>[ 1.442423] usbcore: registered new interface driver cdc_subset
  325. <6>[ 1.442453] usbcore: registered new interface driver zaurus
  326. <6>[ 1.442484] cdc_ncm: 04-Aug-2011
  327. <6>[ 1.442545] usbcore: registered new interface driver cdc_ncm
  328. <6>[ 1.442545] rmnet_init: BAM devices[8]
  329. <6>[ 1.445963] msm_otg msm_otg: msm_otg probe
  330. <6>[ 1.446024] msm_otg msm_otg: OTG regs = e58b8000
  331. <3>[ 1.448008] msm_otg msm_otg: request irq succeed for otg_power
  332. <6>[ 1.453044] pm8921_charger_register_vbus_sn: c0514498
  333. <6>[ 1.453258] msm_otg msm_otg: success to host_notify_dev_register
  334. <6>[ 1.453410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  335. <6>[ 1.453746] usbcore: registered new interface driver cdc_acm
  336. <6>[ 1.453746] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  337. <6>[ 1.453807] usbcore: registered new interface driver usblp
  338. <6>[ 1.453807] Initializing USB Mass Storage driver...
  339. <6>[ 1.453898] usbcore: registered new interface driver usb-storage
  340. <6>[ 1.453898] USB Mass Storage support registered.
  341. <6>[ 1.453960] usbcore: registered new interface driver ums-alauda
  342. <6>[ 1.454082] usbcore: registered new interface driver ums-cypress
  343. <6>[ 1.454143] usbcore: registered new interface driver ums-datafab
  344. <6>[ 1.454173] usbcore: registered new interface driver ums-freecom
  345. <6>[ 1.454265] usbcore: registered new interface driver ums-isd200
  346. <6>[ 1.454326] usbcore: registered new interface driver ums-jumpshot
  347. <6>[ 1.454387] usbcore: registered new interface driver ums-karma
  348. <6>[ 1.454448] usbcore: registered new interface driver ums-onetouch
  349. <6>[ 1.454478] usbcore: registered new interface driver ums-sddr09
  350. <6>[ 1.454539] usbcore: registered new interface driver ums-sddr55
  351. <6>[ 1.454600] usbcore: registered new interface driver ums-usbat
  352. <6>[ 1.454723] usbcore: registered new interface driver usbserial
  353. <6>[ 1.454723] usbserial: USB Serial Driver core
  354. <6>[ 1.454784] USB Serial support registered for pl2303
  355. <6>[ 1.454845] usbcore: registered new interface driver pl2303
  356. <6>[ 1.454845] pl2303: Prolific PL2303 USB to serial adaptor driver
  357. <6>[ 1.454967] USB Serial support registered for Qualcomm USB modem
  358. <6>[ 1.455028] usbcore: registered new interface driver qcserial
  359. <6>[ 1.455119] usbcore: registered new interface driver usb_ehset_test
  360. <6>[ 1.455180] usbcore: registered new interface driver diag_bridge
  361. <6>[ 1.455272] usbcore: registered new interface driver mdm_bridge
  362. <6>[ 1.455547] msm_otg msm_otg: OTG_STATE_UNDEFINED state
  363. <7>[ 1.455730] init
  364. <6>[ 1.456035] usb: android_probe pdata: c0c51ca0
  365. <6>[ 1.456157] msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
  366. <7>[ 1.456249] usb: android_bind disconnect
  367. <6>[ 1.456279] usb:: ci13xxx_pullup is_active: 0
  368. <6>[ 1.456279] usb:: ci13xxx_pullup udc->udc_driver->flags:17
  369. <6>[ 1.456279] usb:: ci13xxx_pullup !udc->vbus_active:1, !udc->driver:1
  370. <7>[ 1.459484] usb: usb_string_id cdev(0xe4056000)->next_string_id=1
  371. <6>[ 1.459667] android_usb gadget: Mass Storage Function, version: 2009/09/11
  372. <6>[ 1.459697] android_usb gadget: Number of LUNs=2
  373. <6>[ 1.459697] lun0: LUN: removable read only CD-ROM file: (no medium)
  374. <6>[ 1.459697] lun1: LUN: removable file: (no medium)
  375. <7>[ 1.459972] usb: usb_string_id cdev(0xe4056000)->next_string_id=2
  376. <7>[ 1.460003] usb: usb_string_id cdev(0xe4056000)->next_string_id=3
  377. <6>[ 1.460003] android_bind : serial_string: 7c1b7113
  378. <7>[ 1.460033] usb: usb_string_id cdev(0xe4056000)->next_string_id=4
  379. <7>[ 1.460033] usb: composite_bind idVendor=0x0, idProduct=0x0
  380. <7>[ 1.460033] usb: composite_bind bcdDevice=0x0
  381. <7>[ 1.460064] usb: composite_bind composite_manufacturer=
  382. <6>[ 1.460064] android_usb gadget: android_usb ready
  383. <6>[ 1.461773] diagchar initialized now
  384. <6>[ 1.462047] mousedev: PS/2 mouse device common for all mice
  385. <6>[ 1.463604] input: sec_keys as /devices/platform/sec_keys/input/input5
  386. <6>[ 1.464367] usbcore: registered new interface driver xpad
  387. <6>[ 1.464550] input: sec_touchscreen as /devices/i2c-3/3-0048/input/input6
  388. <6>[ 1.465191] mms_ts 3-0048: [TSP]fw version 0xbb !!!!
  389. <6>[ 1.465618] mms_ts 3-0048: [TSP]hw rev = 0x01
  390. <3>[ 1.466900] mms_ts 3-0048: [TSP] ISC Ver [0xbb] [0x20] [0x20]
  391. <3>[ 1.471570] mms_ts 3-0048: [TSP] fw is latest. Do not update.
  392. <6>[ 1.477369] msm_otg msm_otg: phy_reset: success
  393. <6>[ 1.477460] msm_otg_link_reset USB_USBMODE: 0x10
  394. <6>[ 1.477704] mms_ts 3-0048: Melfas MMS-series touch controller initialized
  395. <6>[ 1.478101] input: sec_powerkey as /devices/platform/msm_ssbi.0/pm8921-core/sec_powerkey/input/input7
  396. <6>[ 1.479810] input: barometer_sensor as /devices/virtual/input/input8
  397. <6>[ 1.481123] using rtc device, pm8xxx_rtc, for alarms
  398. <6>[ 1.481153] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  399. <6>[ 1.481519] i2c /dev entries driver
  400. <6>[ 1.483808] lirc_dev: IR Remote Control driver registered, major 237
  401. <6>[ 1.483839] IR NEC protocol handler initialized
  402. <6>[ 1.483839] IR RC5(x) protocol handler initialized
  403. <6>[ 1.483931] IR RC6 protocol handler initialized
  404. <6>[ 1.483931] IR JVC protocol handler initialized
  405. <6>[ 1.483961] IR Sony protocol handler initialized
  406. <6>[ 1.483961] IR RC5 (streamzap) protocol handler initialized
  407. <6>[ 1.483961] IR LIRC bridge handler initialized
  408. <6>[ 1.483992] Linux video capture interface: v2.00
  409. <6>[ 1.484114] usbcore: registered new interface driver uvcvideo
  410. <6>[ 1.484114] USB Video Class driver (v1.1.0)
  411. <3>[ 1.484724] [__s5c73m3_probe:3825] S5C73M3 probe
  412. <3>[ 1.488478] [s5c73m3_sensor_probe_cb:3800] Entered
  413. <3>[ 1.493270] [s5c73m3_i2c_probe:3682] Entered
  414. <3>[ 1.497482] [s5c73m3_init_client:3388] Entered
  415. <3>[ 1.501846] [s5c73m3_i2c_probe:3702] Exit
  416. <3>[ 1.506027] [s5c73m3_sensor_probe:3733] Entered
  417. <3>[ 1.510392] [s5c73m3_spi_init:226] Entered
  418. <3>[ 1.514512] [s5c73m3_spi_probe:191] Entered
  419. <3>[ 1.518632] [s5c73m3_spi_probe:201] s5c73m3_spi successfully probed
  420. <3>[ 1.524919] [s5c73m3_sensor_probe : 3756] Probe_done!!
  421. <7>[ 1.530657] ############# s5k6a3yx_probe ##############
  422. <7>[ 1.530688] #######s5k6a3yx_sensor_v4l2_probe #########
  423. <6>[ 1.533099] max17040_probe: MAX17043 driver Loading!
  424. <6>[ 1.533099] max17040_get_version :
  425. <6>[ 1.533648] max17040 13-0036: MAX17040 Fuel-Gauge Ver 00
  426. <6>[ 1.534228] max17040_get_rcomp : current rcomp = 0x851c(85)
  427. <6>[ 1.534228] [max17048] using RCOMP (0x851c)
  428. <6>[ 1.535205] max17040_get_rcomp : current rcomp = 0x851c(85)
  429. <6>[ 1.537799] max17040_work : VCELL:3826mV, AVGVCELL:3826mV
  430. <6>[ 1.537830] max17040_work : Raw SOC:4204%, SOC:41%
  431. <6>[ 1.538776] max17040_work : CONFIG:0x1c85, RATE:0xe9ff
  432. <6>[ 1.539264] max17040_work : STATUS:0xff01, temperature:20
  433. <6>[ 1.545887] max17040 13-0036: 50bfh,1754h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,e9ffh,067dh,ff01h,ffffh,
  434. <4>[ 1.546009] i2c-core: driver [max17040] using legacy suspend method
  435. <4>[ 1.546039] i2c-core: driver [max17040] using legacy resume method
  436. <6>[ 1.546650] smb347_probe: SMB347 driver Loading!
  437. <4>[ 1.551320] i2c-core: driver [smb347] using legacy suspend method
  438. <4>[ 1.551320] i2c-core: driver [smb347] using legacy resume method
  439. <6>[ 1.572440] pm8xxx_tm_probe: OK
  440. <6>[ 1.573416] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) Initialized
  441. <6>[ 1.573660] Bluetooth: HCI UART driver ver 2.2
  442. <6>[ 1.573721] Bluetooth: HCI H4 protocol initialized
  443. <6>[ 1.573721] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  444. <6>[ 1.574240] cpuidle: using governor ladder
  445. <6>[ 1.574240] cpuidle: using governor menu
  446. <6>[ 1.574698] mmc0: mci-version: 18
  447. <6>[ 1.576346] mmc0: bam physical base=0x12402000
  448. <6>[ 1.576346] mmc0: bam virtual base=0xe58c4000
  449. <6>[ 1.576377] mmc0: BAM device registered. bam_handle=0xe403b800
  450. <6>[ 1.576499] sps:REVISION of BAM 0xe58c4000 is 0x5.
  451. <6>[ 1.576651] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  452. <6>[ 1.576682] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  453. <3>[ 1.576743] mmc0: No card detect facilities available
  454. <6>[ 1.581199] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  455. <6>[ 1.581229] mmc0: 8 bit data mode enabled
  456. <6>[ 1.581229] mmc0: 4 bit data mode disabled
  457. <6>[ 1.581229] mmc0: polling status mode disabled
  458. <6>[ 1.581229] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  459. <6>[ 1.581260] mmc0: Slot eject status = 0
  460. <6>[ 1.581260] mmc0: Power save feature enable = 1
  461. <6>[ 1.581260] mmc0: SPS-BAM data transfer mode available
  462. <6>[ 1.581382] mmc1: mci-version: 18
  463. <6>[ 1.583610] mmc1: bam physical base=0x12182000
  464. <6>[ 1.583610] mmc1: bam virtual base=0xe58d0000
  465. <6>[ 1.583610] mmc1: BAM device registered. bam_handle=0xe403be00
  466. <6>[ 1.583732] sps:REVISION of BAM 0xe58d0000 is 0x5.
  467. <6>[ 1.583915] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
  468. <6>[ 1.583946] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
  469. <7>[ 1.584220] msmsdcc_probe : Change sysfs Card Detect
  470. <6>[ 1.585106] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
  471. <6>[ 1.585136] mmc1: 8 bit data mode disabled
  472. <6>[ 1.585136] mmc1: 4 bit data mode enabled
  473. <6>[ 1.585136] mmc1: polling status mode disabled
  474. <6>[ 1.585167] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
  475. <6>[ 1.585167] mmc1: Slot eject status = 1
  476. <6>[ 1.585167] mmc1: Power save feature enable = 1
  477. <6>[ 1.585197] mmc1: SPS-BAM data transfer mode available
  478. <6>[ 1.585411] mmc2: mci-version: 18
  479. <6>[ 1.586418] mmc2: bam physical base=0x121c2000
  480. <6>[ 1.586418] mmc2: bam virtual base=0xe58d8000
  481. <6>[ 1.586418] mmc2: BAM device registered. bam_handle=0xe3922600
  482. <6>[ 1.586571] sps:REVISION of BAM 0xe58d8000 is 0x5.
  483. <6>[ 1.586723] mmc2: Qualcomm MSM SDCC-BAM at 0x00000000121c2000 irq 127
  484. <6>[ 1.586815] ulpi_init: ULPI 0x44:0x3f:0x3c:0x13
  485. <6>[ 1.586845] ulpi_init: ULPI 0x44:0x3f:0x3c:0x13
  486. <6>[ 1.586876] msm_otg_init_sm, smb347s
  487. <6>[ 1.586876] msm_otg msm_otg: OTG_STATE_B_IDLE state
  488. <6>[ 1.586906] msm_otg msm_otg: gadget on
  489. <6>[ 1.587761] mmc2: Qualcomm MSM SDCC-DML at 0x00000000121c0800
  490. <6>[ 1.587791] brcm_wifi_status_register: callback is c0616d60, devid is e406db80
  491. <6>[ 1.590080] msm_otg_start_peripheral disable_peripheral: 0
  492. <6>[ 1.590111] usb:: ci13xxx_vbus_session,2791
  493. <6>[ 1.590111] usb:: ci13xxx_vbus_session gadget_ready:1, is_active:1
  494. <6>[ 1.590141] usb:: hw_device_reset
  495. <6>[ 1.590141] usb:: ci13xxx_vbus_session softconnect: 0
  496. <6>[ 1.590233] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma -1 dmacrcri -1
  497. <6>[ 1.590233] mmc2: 8 bit data mode disabled
  498. <6>[ 1.590264] mmc2: 4 bit data mode enabled
  499. <6>[ 1.590264] mmc2: polling status mode disabled
  500. <6>[ 1.590264] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  501. <6>[ 1.590294] mmc2: Slot eject status = 0
  502. <6>[ 1.590294] mmc2: Power save feature enable = 1
  503. <6>[ 1.590294] mmc2: SPS-BAM data transfer mode available
  504. <3>[ 1.590721] aat1290a_led_probe : Probe
  505. <6>[ 1.596154] usbcore: registered new interface driver usbhid
  506. <6>[ 1.596184] usbhid: USB HID core driver
  507. <6>[ 1.596795] logger: created 512K log 'log_main'
  508. <6>[ 1.596947] logger: created 256K log 'log_events'
  509. <6>[ 1.597070] logger: created 2048K log 'log_radio'
  510. <6>[ 1.597222] logger: created 256K log 'log_system'
  511. <6>[ 1.597222] sec_getlog_supply_loggerinfo: 0xc0e25124 0xc0ea5124 0xc10a5124 0xc10e5124
  512. <6>[ 1.598290] usbcore: registered new interface driver snd-usb-audio
  513. <6>[ 1.600244] msm_pcm_probe: dev name msm-voip-dsp
  514. <6>[ 1.600824] msm_pcm_probe: dev name msm-pcm-dsp
  515. <6>[ 1.601098] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  516. <6>[ 1.601648] msm_compr_probe: dev name msm-compr-dsp
  517. <6>[ 1.601892] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  518. <3>[ 1.601983] msm_soc_platform_init
  519. <6>[ 1.604517] msm_afe_probe: dev name msm-pcm-afe
  520. <3>[ 1.618922] msm_afe_afe_probe
  521. <6>[ 1.699801] mmc0: new high speed MMC card at address 0001
  522. <6>[ 1.700198] mmcblk0: mmc0:0001 MAG4FB 14.6 GiB
  523. <6>[ 1.700412] mmcblk0boot0: mmc0:0001 MAG4FB partition 1 2.00 MiB
  524. <6>[ 1.700686] mmcblk0boot1: mmc0:0001 MAG4FB partition 2 2.00 MiB
  525. <4>[ 1.703464] Alternate GPT is invalid, using primary GPT.
  526. <6>[ 1.703555] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
  527. <6>[ 1.708072] mmcblk0boot1: unknown partition table
  528. <6>[ 1.709934] mmcblk0boot0: unknown partition table
  529. <6>[ 1.721410] asoc: null-codec-dai <-> MultiMedia1 mapping ok
  530. <6>[ 1.726232] asoc: null-codec-dai <-> MultiMedia2 mapping ok
  531. <6>[ 1.730993] asoc: null-codec-dai <-> CS-VOICE mapping ok
  532. <6>[ 1.739203] asoc: null-codec-dai <-> VoIP mapping ok
  533. <6>[ 1.743842] asoc: null-codec-dai <-> MultiMedia3 mapping ok
  534. <6>[ 1.748542] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
  535. <6>[ 1.753731] asoc: null-codec-dai <-> INT_FM_HOSTLESS mapping ok
  536. <3>[ 1.758461] msm_asoc_pcm_new
  537. <6>[ 1.760415] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  538. <3>[ 1.798809] msm_asoc_pcm_new
  539. <6>[ 1.805890] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  540. <6>[ 1.835830] asoc: null-codec-dai <-> MultiMedia4 mapping ok
  541. <6>[ 1.840531] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  542. <6>[ 1.845292] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  543. <6>[ 1.849961] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  544. <6>[ 1.854631] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  545. <6>[ 1.859331] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  546. <6>[ 1.863970] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  547. <6>[ 1.868365] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  548. <6>[ 1.873035] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  549. <6>[ 1.877735] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  550. <6>[ 1.882496] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
  551. <6>[ 1.887166] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
  552. <6>[ 1.891774] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
  553. <4>[ 1.897207] tabla_codec tabla_codec: ASoC: Failed to create Digital Mic1 debugfs file
  554. <6>[ 1.903250] asoc: tabla_i2s_rx1 <-> msm-dai-q6.0 mapping ok
  555. <6>[ 1.909293] asoc: tabla_i2s_tx1 <-> msm-dai-q6.1 mapping ok
  556. <6>[ 1.910086] input: msm8960-snd-card Volumedown Jack as /devices/platform/soc-audio.0/sound/card0/input9
  557. <6>[ 1.910392] input: msm8960-snd-card Volumeup Jack as /devices/platform/soc-audio.0/sound/card0/input10
  558. <6>[ 1.910636] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input11
  559. <6>[ 1.911002] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input12
  560. <6>[ 1.915733] ALSA device list:
  561. <6>[ 1.915733] #0: msm8960-snd-card
  562. <6>[ 1.915855] GACT probability NOT on
  563. <6>[ 1.915855] Mirror/redirect action on
  564. <6>[ 1.915885] u32 classifier
  565. <6>[ 1.915885] Actions configured
  566. <6>[ 1.915885] Netfilter messages via NETLINK v0.30.
  567. <6>[ 1.915946] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  568. <6>[ 1.916526] ctnetlink v0.93: registering with nfnetlink.
  569. <6>[ 1.916587] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  570. <6>[ 1.916587] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  571. <6>[ 1.917198] xt_time: kernel timezone is -0000
  572. <6>[ 1.917381] ip_tables: (C) 2000-2006 Netfilter Core Team
  573. <6>[ 1.917564] arp_tables: (C) 2002 David S. Miller
  574. <6>[ 1.917625] TCP cubic registered
  575. <6>[ 1.917625] Initializing XFRM netlink socket
  576. <6>[ 1.918296] NET: Registered protocol family 10
  577. <6>[ 1.919578] Mobile IPv6
  578. <6>[ 1.919609] ip6_tables: (C) 2000-2006 Netfilter Core Team
  579. <6>[ 1.919731] IPv6 over IPv4 tunneling driver
  580. <6>[ 1.920250] NET: Registered protocol family 17
  581. <6>[ 1.920280] NET: Registered protocol family 15
  582. <6>[ 1.920494] Bluetooth: RFCOMM TTY layer initialized
  583. <6>[ 1.920524] Bluetooth: RFCOMM socket layer initialized
  584. <6>[ 1.920524] Bluetooth: RFCOMM ver 1.11
  585. <6>[ 1.920524] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  586. <6>[ 1.920555] Bluetooth: BNEP filters: protocol multicast
  587. <6>[ 1.920555] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  588. <5>[ 1.920708] Registering the dns_resolver key type
  589. <6>[ 1.920738] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 0
  590. <5>[ 1.920769] Registering SWP/SWPB emulation handler
  591. <6>[ 1.931023] clock_late_init() disabled 201 unused clocks
  592. <6>[ 1.938379] msm_watchdog_probe: pet_time=10000 bark_time=20000
  593. <6>[ 1.938440] WDOG handled by TZ:dump @0xe3b33000 PA:aa233000
  594. <6>[ 1.938593] MSM Watchdog Initialized
  595. <3>[ 1.944056] set_dload_mode <1> ( c0018b80 )
  596. <6>[ 1.947474] sec_debug_subsys_init: msm_shared_ram_phys=80000000 SMEM_ID_VENDOR2=136 size=7772
  597. <6>[ 1.947474] sec_debug_subsys_init: krait(80004cd8) rpm(800051b8) modem(80005a2c) dsps(800062a0)
  598. <6>[ 1.949275] cypress_power_on is finished.
  599. <6>[ 1.949458] input: sec_touchkey as /devices/platform/i2c-gpio.16/i2c-16/16-0020/input/input13
  600. <7>[ 1.950007] Registered led device: button-backlight
  601. <3>[ 1.977475] cypress_touchkey 16-0020: Touchkey FW Version: 0x06
  602. <3>[ 1.982481] cypress_touchkey 16-0020: Touchkey FW Version: 0x06, system_rev: 10
  603. <3>[ 1.989745] cypress_touchkey 16-0020: [TouchKey] FW update does not need!
  604. <7>[ 1.998657] [TouchKey] data[0]=50 data[1]=6 data[2]=5 data[3]=1
  605. <7>[ 2.058293] [Touchkey] autocal Enabled
  606. <6>[ 2.058538] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-03-06 11:11:04 UTC (5569864)
  607. <6>[ 2.058751] pm8921_charger_probe: driver Loading SKIP!!!
  608. <4>[ 2.058782] pm8921-charger: probe of pm8921-charger failed with error -22
  609. <6>[ 2.059056] sec_bat_probe: SEC Battery Driver Loading
  610. <6>[ 2.059056] [battery] enable Vref_batt_therm
  611. <6>[ 2.059056] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  612. <6>[ 2.059484] sec_bat_probe: initial charging_status = 1
  613. <6>[ 2.062169] cable type (0) -----
  614. <3>[ 2.063238] Unable to register core for 1
  615. <6>[ 2.066351] max17040_rcomp_update : temp(30), rcomp 0x851c -> 0x6d1c (109)
  616. <6>[ 2.067663] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  617. <6>[ 2.068060] tspdrv: tspdrv_probe.
  618. <7>[ 2.068457] ImmVibeSPI_ForceOut_Initialize.
  619. <7>[ 2.068548] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
  620. <6>[ 2.070044] Freeing init memory: 992K
  621. <3>[ 2.073767] init: /init.qcom.rc: 516: invalid command '/system/bin/log'
  622. <3>[ 2.079719] init: /init.qcom.rc: 595: ignored duplicate definition of service 'ril-daemon'
  623. <3>[ 2.089516] init: could not import file '/system/etc/init.local.rc' from '/init.rc'
  624. <4>[ 2.096902] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  625. <3>[ 2.401037] init: could not open /dev/keychord
  626. <6>[ 2.476392] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1
  627. <6>[ 2.476484] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/efs
  628. <6>[ 2.553822] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: barrier=1
  629. <6>[ 2.553914] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  630. <6>[ 2.574729] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1,discard,noauto_da_alloc,journal_async_commit
  631. <6>[ 2.577170] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  632. <6>[ 2.577201] sec_bat_monitor_work: battery check is present (1 time )
  633. <6>[ 2.578666] [battery] level(41), vcell(3847500), therm(304)
  634. <6>[ 2.578666] [battery] cable_type(7), chg_status(1), health(1)
  635. <6>[ 2.578696] [battery] timeout_chgstp(0), chg_enabled(0), rechg_status(0)
  636. <6>[ 2.582267] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: barrier=1
  637. <6>[ 2.593773] EXT4-fs (mmcblk0p16): recovery complete
  638. <6>[ 2.594750] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1
  639. <6>[ 3.065801] EXT4-fs (mmcblk0p14): re-mounted. Opts: barrier=1
  640. <6>[ 3.327514] sec_jack:sec_jack_det_irq_handler : ready = 1.
  641. <6>[ 3.327544] sec_jack: ear micbias off
  642. <6>[ 3.626552] EXT4-fs (mmcblk0p14): re-mounted. Opts: barrier=1
  643. <6>[ 3.707614] a2220_bootup_init:a2220_bootup_init 7
  644. <6>[ 3.735540] warning: `qrngd' uses 32-bit capabilities (legacy support in use)
  645. <6>[ 3.737738] a2220_bootup_init:firmware loaded successfully
  646. <7>[ 3.782694] #### init init
  647. <3>[ 3.785136] init: cannot find '/system/bin/ATFWD-daemon', disabling 'atfwd'
  648. <3>[ 3.800396] init: cannot find '/system/bin/qseecomd', disabling 'qseecomd'
  649. <3>[ 3.818251] init: cannot find '/system/bin/time_daemon', disabling 'time_daemon'
  650. <7>[ 3.839401] usb: enable_store enabled=0, !dev->enabled=1
  651. <6>[ 3.839401] usb:: ci13xxx_pullup is_active: 0
  652. <6>[ 3.839401] usb:: hw_device_state dma: 0
  653. <6>[ 3.839432] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 0
  654. <6>[ 3.839432] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 0
  655. <7>[ 3.840134] usb: functions_store buff=mtp,acm,adb
  656. <7>[ 3.840164] usb: android_enable_function name=mtp
  657. <7>[ 3.840164] usb: android_enable_function name=acm
  658. <7>[ 3.840195] usb: android_enable_function name=adb
  659. <7>[ 3.840256] usb: enable_store enabled=1, !dev->enabled=1
  660. <7>[ 3.840286] usb: enable_store f:mtp
  661. <7>[ 3.840286] usb: enable_store f:acm
  662. <7>[ 3.840286] usb: acm is enabled. (bcdDevice=0x400)
  663. <7>[ 3.840317] usb: enable_store f:adb
  664. <7>[ 3.840317] usb: enable_store vendor=4e8,product=6860,bcdDevice=400
  665. <7>[ 3.840317] ,Class=0,SubClass=0,Protocol=0
  666. <7>[ 3.840347] usb: enable_store next cmd : usb_add_config
  667. <3>[ 3.840683] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  668. <6>[ 3.854661] adb_open
  669. <7>[ 3.854692] usb: android_bind_enabled_functions f:mtp
  670. <6>[ 3.854692] mtp_bind_config
  671. <7>[ 3.854723] usb: usb_string_id cdev(0xe4056000)->next_string_id=5
  672. <7>[ 3.854814] usb: android_bind_enabled_functions f:acm
  673. <7>[ 3.854814] usb: usb_string_id cdev(0xe4056000)->next_string_id=6
  674. <7>[ 3.854814] usb: usb_string_id cdev(0xe4056000)->next_string_id=7
  675. <7>[ 3.854845] usb: usb_string_id cdev(0xe4056000)->next_string_id=8
  676. <6>[ 3.854875] DUN is registerd
  677. <7>[ 3.854906] usb: android_bind_enabled_functions f:adb
  678. <6>[ 3.854906] adb_bind_config
  679. <6>[ 3.854967] usb:: ci13xxx_pullup is_active: 1
  680. <6>[ 3.854967] usb:: hw_device_state dma: aa755000
  681. <6>[ 3.854997] usb:: hw_device_state hw_read(CAP_ENDPTLISTADDR, ~0): aa755000
  682. <6>[ 3.854997] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 147
  683. <6>[ 3.854997] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 1
  684. <6>[ 3.857775] fsa9485 11-0025: fsa9485_init_detect
  685. <6>[ 3.858934] fsa9485 11-0025: dev1: 0x4, dev2: 0x0
  686. <6>[ 3.858934] fsa9485 11-0025: usb connect path
  687. <3>[ 3.870441] init: no such service 'location_mq'
  688. <6>[ 3.878986] fsa9485_usb_cb attached 1
  689. <6>[ 3.879017] fsa9485_usb_cb set vbus state
  690. <6>[ 3.879017] msm_otg msm_otg: msm_otg_set_vbus_state(1): on working
  691. <6>[ 3.879047] sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
  692. <6>[ 3.880024] smb347_set_charging_current : 500
  693. <6>[ 3.883290] [battery] INPUT_USBIN ----------
  694. <6>[ 3.883290] smb347_charger_function_conrol : reg (0x1) = 0x21
  695. <6>[ 3.888081] smb347_inok_work_func : skip dcin type.
  696. <3>[ 3.893941] init: no such service 'xtwifi_inet'
  697. <6>[ 3.909201] smb347_set_top_off : => reg (0x0) = 0x7b
  698. <3>[ 3.910514] init: no such service 'xtwifi_client'
  699. <6>[ 3.919029] max17040_rcomp_update : temp(30), rcomp 0x6d1c -> 0x851c (133)
  700. <6>[ 3.920402] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  701. <6>[ 3.948054] execute_cmdmsg : execute_cmdmsg :: 80 0 0 0
  702. <6>[ 3.948267] execute_cmdmsg + 1
  703. <6>[ 3.948298] execute_cmdmsg + 2
  704. <6>[ 3.948451] execute_cmdmsg + 3
  705. <6>[ 3.948451] execute_cmdmsg + 4
  706. <6>[ 3.948481] got ACK
  707. <6>[ 3.948481] execute_cmdmsg - finish
  708. <6>[ 3.948481] a2220_bootup_init:a2220_bootup_init 8
  709. <6>[ 3.948512] execute_cmdmsg : execute_cmdmsg :: 80 52 0 48
  710. <6>[ 3.948725] execute_cmdmsg + 1
  711. <6>[ 3.948725] execute_cmdmsg + 2
  712. <6>[ 3.948939] execute_cmdmsg + 3
  713. <6>[ 3.948969] execute_cmdmsg + 4
  714. <6>[ 3.948969] got ACK
  715. <6>[ 3.948969] execute_cmdmsg - finish
  716. <6>[ 3.949000] execute_cmdmsg : execute_cmdmsg :: 80 52 0 5c
  717. <6>[ 3.949153] execute_cmdmsg + 1
  718. <6>[ 3.949153] execute_cmdmsg + 2
  719. <6>[ 3.949336] execute_cmdmsg + 3
  720. <6>[ 3.949336] execute_cmdmsg + 4
  721. <6>[ 3.949336] got ACK
  722. <6>[ 3.949336] execute_cmdmsg - finish
  723. <6>[ 3.949397] execute_cmdmsg : execute_cmdmsg :: 80 10 0 1
  724. <6>[ 3.949641] execute_cmdmsg + 1
  725. <6>[ 3.949641] execute_cmdmsg : ...go to suspend first
  726. <6>[ 3.949671] a2220_bootup_init : a2220_bootup_init - finish
  727. <3>[ 3.972318] init: cannot find '/system/bin/sensors.qcom', disabling 'sensors'
  728. <3>[ 3.995788] init: sys_prop: permission denied uid:1002 name:wlan.poke_helper.pid
  729. <7>[ 4.013184] load_image: load q6.mdt image
  730. <3>[ 4.037540] init: no such service 'battery_monitor'
  731. <6>[ 4.060064] usb:: isr_reset_handler udc: e461b000
  732. <7>[ 4.060247] usb: composite_disconnect
  733. <7>[ 4.060277] usb: android_disconnect cable state (1)
  734. <7>[ 4.060338] usb: android_work config= (null),connected=0,sw_connected=0
  735. <7>[ 4.060338] usb: android_work did not send uevent (0 0 (null))
  736. <6>[ 4.096627] msm_thermal: enabled = 0
  737. <6>[ 4.181168]
  738. <6>[ 4.181168] Trip point triggered by current temperature (42 degrees) measured by Temperature-Sensor 0
  739. <6>[ 4.434121] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  740. <6>[ 4.434152] sec_bat_monitor_work: battery check is present (1 time )
  741. <6>[ 4.435678] [battery] level(41), vcell(3800000), therm(304)
  742. <6>[ 4.435678] [battery] cable_type(1), chg_status(1), health(1)
  743. <6>[ 4.435708] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  744. <6>[ 4.679352] usb:: isr_reset_handler udc: e461b000
  745. <7>[ 4.679566] usb: composite_disconnect
  746. <7>[ 4.679597] usb: android_disconnect cable state (1)
  747. <7>[ 4.679688] usb: android_work config= (null),connected=0,sw_connected=0
  748. <7>[ 4.679688] usb: android_work did not send uevent (0 0 (null))
  749. <7>[ 4.815992] usb: GET_DES
  750. <7>[ 4.816084] usb: android_work config= (null),connected=1,sw_connected=0
  751. <7>[ 4.816297] usb: android_work sent uevent USB_STATE=CONNECTED
  752. <7>[ 4.819014] usb: GET_DES
  753. <7>[ 4.825392] usb: set_config_number single config
  754. <7>[ 4.825423] usb: set_interface_count next_interface_id=4
  755. <7>[ 4.825637] usb: set_config_number single config
  756. <7>[ 4.825637] usb: set_interface_count next_interface_id=4
  757. <6>[ 4.825972] android_usb gadget: high speed config #1: android
  758. <7>[ 4.826064] usb: SET_CON
  759. <7>[ 4.826155] usb: android_work config=c0ca4270,connected=1,sw_connected=1
  760. <7>[ 4.826216] usb: android_work sent uevent USB_STATE=CONFIGURED
  761. <6>[ 5.180528] pil_qdsp6v4 pil_qdsp6v4.0: brought out of reset
  762. <3>[ 5.180558] LOAD IMAGE q6, ret 0
  763. <7>[ 5.182908] load_image: load modem_fw.mdt image
  764. <6>[ 5.188829] diag: incomplete pkt on LPASS CNTL ch
  765. <6>[ 5.210224] diag: incomplete pkt on LPASS CNTL ch
  766. <6>[ 5.210529] apr_tal:Q6 Is Up
  767. <6>[ 5.216786] diag: event mask not set yet, so no update
  768. <3>[ 5.458934] store_afe_cal: offset 1093340672 is > mem_len 344064
  769. <6>[ 5.489455] msm_pcm_routing_process_audio: reg 0 val 0 set 1
  770. <6>[ 5.489699] msm8960_i2s_startup
  771. <6>[ 5.491408] apr_tal: SMD_EVENT_OPEN
  772. <6>[ 5.496902] msm8660_i2s_hw_params Codec Clock c0c38538 Rx Bit Clock c0c37b30
  773. <6>[ 5.497268] msm_pcm_routing_hw_params : channel = 2
  774. <6>[ 5.672180] pil_qdsp6v4 pil_qdsp6v4.1: brought out of reset
  775. <3>[ 5.672211] LOAD IMAGE modem_fw, ret 0
  776. <7>[ 5.675019] load_image: load modem.mdt image
  777. <6>[ 6.837723] msmsdcc_runtime_suspend: Enter WIFI suspend
  778. <6>[ 8.678864] pil_qdsp6v4 pil_qdsp6v4.2: brought out of reset
  779. <3>[ 8.678925] LOAD IMAGE modem, ret 0
  780. <3>[ 8.681550] smd_pkt_open: DATA5_CNTL open failed -19
  781. <3>[ 9.189043] smd_pkt_open: DATA5_CNTL open failed -19
  782. <3>[ 9.461406] Notify: smsm init
  783. <6>[ 9.463451] _smem_log_init: no static log or log_idx allocated
  784. <6>[ 9.463451] _smem_log_init: no power log or log_idx allocated
  785. <3>[ 9.695742] smd_pkt_open: DATA5_CNTL open failed -19
  786. <3>[ 10.202502] smd_pkt_open: DATA5_CNTL open failed -19
  787. <6>[ 10.678864] diag: incomplete pkt on Modem CNTL ch
  788. <6>[ 10.678956] diag: incomplete pkt on Modem CNTL ch
  789. <6>[ 10.680573] diag: event mask not set yet, so no update
  790. <3>[ 10.711216] smd_pkt_open: DATA5_CNTL open failed -19
  791. <6>[ 10.892415] apr_tal:Modem Is Up
  792. <3>[ 11.217976] smd_pkt_open: DATA5_CNTL open failed -19
  793. <6>[ 11.589226] sps:REVISION of BAM 0xe5800000 is 0x5.
  794. <6>[ 11.679597] diag: incomplete pkt on Modem CNTL ch
  795. <3>[ 11.724645] smd_pkt_open: DATA5_CNTL open failed -19
  796. <3>[ 12.231435] smd_pkt_open: DATA5_CNTL open failed -19
  797. <3>[ 12.738196] smd_pkt_open: DATA5_CNTL open failed -19
  798. <3>[ 13.244925] smd_pkt_open: DATA5_CNTL open failed -19
  799. <3>[ 13.751564] smd_pkt_open: DATA5_CNTL open failed -19
  800. <3>[ 14.259942] smd_pkt_open: DATA5_CNTL open failed -19
  801. <3>[ 14.332427] handle_bam_mux_cmd: dropping invalid LCID 10 reserved 0 cmd 4 pad 0 ch 10 len 0
  802. <3>[ 14.340851] handle_bam_mux_cmd: dropping invalid LCID 11 reserved 0 cmd 4 pad 0 ch 11 len 0
  803. <3>[ 15.677002] accel_open_calibration: Can't open calibration file
  804. <6>[ 15.682343] Sensors unset: 7fff
  805. <6>[ 16.397924] light_enable_store,new_value=1
  806. <6>[ 17.557881] proximity_enable_store,new_value=1, prox_cal 0
  807. <6>[ 17.879627] light_enable_store,new_value=0
  808. <6>[ 17.880878] proximity_enable_store,new_value=0, prox_cal 0
  809. <6>[ 18.619563] msm8960_i2s_shutdown Codec Clock c0c38538 Rx Bit Clock c0c37b30
  810. <6>[ 18.619655] msm_pcm_routing_close : be_id = 0
  811. <6>[ 18.642911] msm_pcm_routing_process_audio: reg 0 val 0 set 0
  812. <7>[ 23.651426] led_blink input =0x000000 0 0
  813. <7>[ 23.651426] , size=13
  814. <4>[ 23.651823] [LED] USER : R:0,G:0,B:0
  815. <7>[ 23.653990] led_blink input =0x000000 0 0
  816. <7>[ 23.653990] , size=13
  817. <4>[ 23.654570] [LED] USER : R:0,G:0,B:0
  818. <7>[ 23.655486] tspdrv: Enable time = 0 msec
  819. <6>[ 23.735632] [BT] Bluetooth Power On.
  820. <6>[ 24.151258] [BT] wake_peer is registered.
  821. <6>[ 28.187700] [BT] going to sleep...
  822. <6>[ 31.588737] max17040_work : VCELL:3842mV, AVGVCELL:3829mV
  823. <6>[ 31.588768] max17040_work : Raw SOC:4204%, SOC:41%
  824. <6>[ 31.589714] max17040_work : CONFIG:0x1c85, RATE:0xe9ff
  825. <6>[ 31.590202] max17040_work : STATUS:0xff01, temperature:30
  826. <6>[ 31.596917] max17040 13-0036: 20c0h,1754h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,e9ffh,067dh,ff01h,ffffh,
  827. <6>[ 34.447733] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  828. <6>[ 34.957759] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  829. <6>[ 34.957790] sec_bat_monitor_work: battery check is present (1 time )
  830. <6>[ 34.959285] [battery] level(41), vcell(3828750), therm(304)
  831. <6>[ 34.959316] [battery] cable_type(1), chg_status(1), health(1)
  832. <6>[ 34.959316] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  833. <6>[ 61.938715] max17040_work : VCELL:3827mV, AVGVCELL:3828mV
  834. <6>[ 61.938745] max17040_work : Raw SOC:4204%, SOC:41%
  835. <6>[ 61.939691] max17040_work : CONFIG:0x1c85, RATE:0xefff
  836. <6>[ 61.940180] max17040_work : STATUS:0xff01, temperature:30
  837. <6>[ 61.946894] max17040 13-0036: 60bfh,1754h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,efffh,067dh,ff01h,ffffh,
  838. <7>[ 63.492598] usb: state_show buf=CONFIGURED
  839. <6>[ 63.493422] acc_open
  840. <6>[ 63.493422] acc_release
  841. <7>[ 63.595757] tspdrv: Enable time = 0 msec
  842. <7>[ 63.598260] tspdrv: Enable time = 1 msec
  843. <6>[ 63.598290] tspdrv: ENABLE
  844. <7>[ 63.598351] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
  845. <7>[ 63.599450] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
  846. <7>[ 63.599511] tspdrv: Enable time = 0 msec
  847. <6>[ 64.460308] pn544_dev_ioctl power on, irq=1
  848. <6>[ 64.470441] pn544_dev_ioctl power off, irq=1
  849. <6>[ 64.483137] pn544_dev_ioctl power on, irq=1
  850. <6>[ 64.962459] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  851. <6>[ 65.467785] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  852. <6>[ 65.467816] sec_bat_monitor_work: battery check is present (1 time )
  853. <6>[ 65.469342] [battery] level(41), vcell(3776250), therm(303)
  854. <6>[ 65.469342] [battery] cable_type(1), chg_status(1), health(1)
  855. <6>[ 65.469342] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  856. <6>[ 66.058599] mtp_open
  857. <6>[ 66.570700] alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  858. <3>[ 70.765847] NOHZ: local_softirq_pending 08
  859. <3>[ 70.769510] NOHZ: local_softirq_pending 08
  860. <3>[ 71.118022] NOHZ: local_softirq_pending 08
  861. <3>[ 71.143079] NOHZ: local_softirq_pending 08
  862. <3>[ 71.175797] NOHZ: local_softirq_pending 08
  863. <3>[ 71.278986] NOHZ: local_softirq_pending 08
  864. <3>[ 71.370059] NOHZ: local_softirq_pending 08
  865. <3>[ 71.509690] NOHZ: local_softirq_pending 08
  866. <3>[ 71.516465] NOHZ: local_softirq_pending 08
  867. <3>[ 72.527117] NOHZ: local_softirq_pending 08
  868. <3>[ 73.057836] store_afe_cal: offset 1093340672 is > mem_len 344064
  869. <6>[ 73.076117] msm_pcm_routing_process_audio: reg 0 val 0 set 1
  870. <6>[ 73.076300] msm8960_i2s_startup
  871. <6>[ 73.078040] apr_tal: SMD_EVENT_OPEN
  872. <6>[ 73.081153] msm8660_i2s_hw_params Codec Clock c0c38538 Rx Bit Clock c0c37b30
  873. <6>[ 73.081184] msm_pcm_routing_hw_params : channel = 2
  874. <6>[ 73.085060] msm_pcm_routing_prepare : be_id = 0
  875. <6>[ 73.096627] afe_q6_interface_prepare:
  876. <6>[ 73.159407] msm_dai_q6_trigger:port:0 cmd:1 dai_data->status_mask = 0
  877. <6>[ 73.159438] afe_send_cal
  878. <3>[ 74.353822] init: no such service 'qosmgrd'
  879. <3>[ 74.507431] mdnie [mdnie set] in scenario_store, input value = 0
  880. <3>[ 74.515794] mdnie [mdnie set] mDNIe_Set_Mode
  881. <3>[ 74.528490] mdnie cmap->len 256
  882. <3>[ 74.530749] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)
  883. <3>[ 74.548542] mdnie [mDNIe] Sharpness value : (0)
  884. <3>[ 74.563985] mdnie [mdnie set]negative_store, input value = 0
  885. <6>[ 74.573111] [negative] value = 0
  886. <3>[ 74.573111] mdnie [mdnie set] mDNIe_Set_mDNIe_Mode = 0
  887. <3>[ 74.577353] mdnie [mdnie set] mDNIe_Set_Mode
  888. <3>[ 74.590904] mdnie cmap->len 256
  889. <3>[ 74.593163] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)
  890. <3>[ 74.599877] mdnie [mDNIe] Sharpness value : (0)
  891. <7>[ 77.048405] rmnet0: no IPv6 routers present
  892. <6>[ 77.827376] afe_close: port_id=0
  893. <6>[ 77.829207] msm8960_i2s_shutdown Codec Clock c0c38538 Rx Bit Clock c0c37b30
  894. <6>[ 77.829299] msm_pcm_routing_close : be_id = 0
  895. <6>[ 77.886159] msm_pcm_routing_process_audio: reg 0 val 0 set 0
  896. <6>[ 92.860796] max17040_work : VCELL:3831mV, AVGVCELL:3816mV
  897. <6>[ 92.860857] max17040_work : Raw SOC:4204%, SOC:41%
  898. <6>[ 92.862871] max17040_work : CONFIG:0x1c85, RATE:0xf3ff
  899. <6>[ 92.863909] max17040_work : STATUS:0xff01, temperature:30
  900. <6>[ 92.880268] max17040 13-0036: 90bfh,1754h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,f3ffh,067dh,ff01h,ffffh,
  901. <6>[ 95.478589] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  902. <6>[ 95.988554] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  903. <6>[ 95.988615] sec_bat_monitor_work: battery check is present (1 time )
  904. <6>[ 95.991698] [battery] level(41), vcell(3830000), therm(302)
  905. <6>[ 95.991728] [battery] cable_type(1), chg_status(1), health(1)
  906. <6>[ 95.991790] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  907. <6>[ 123.841233] max17040_work : VCELL:3876mV, AVGVCELL:3818mV
  908. <6>[ 123.841263] max17040_work : Raw SOC:4234%, SOC:42%
  909. <6>[ 123.843308] max17040_work : CONFIG:0x1c85, RATE:0x3f00
  910. <6>[ 123.844346] max17040_work : STATUS:0xff01, temperature:30
  911. <6>[ 123.860277] max17040 13-0036: d0c1h,af54h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,3f00h,067dh,ff01h,ffffh,
  912. <6>[ 127.958156] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  913. <6>[ 128.458568] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  914. <6>[ 128.458629] sec_bat_monitor_work: battery check is present (1 time )
  915. <6>[ 128.461803] [battery] level(42), vcell(3875000), therm(304)
  916. <6>[ 128.461834] [battery] cable_type(1), chg_status(1), health(1)
  917. <6>[ 128.461864] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  918. <6>[ 128.462780] [fg] p:4234, s1:42, s2:41, v:3875000, t:0
  919. <6>[ 134.243796] request_suspend_state: sleep (3->3) at 134245404142 (2012-09-28 02:33:44.756895468 UTC)
  920. <6>[ 134.243949] early_suspend: call handlers
  921. <6>[ 134.244590] cypress_power_off is finished.
  922. <5>[ 134.244620] mms_ts 3-0048: mms_ts_suspend: users=1
  923. <7>[ 134.244681] [TSP] release_all_fingers
  924. <6>[ 134.245383] tsp 1.8V off is finished.
  925. <6>[ 134.246177] tsp 3.3V off is finished.
  926. <7>[ 134.431130] tspdrv: Enable time = 0 msec
  927. <4>[ 135.298428] stop_drawing_early_suspend: timeout waiting for userspace to stop drawing
  928. <6>[ 135.303647] mipi_samsung_disp_early_suspend, disable blt mode
  929. <6>[ 135.303677] set_esd_disable is called
  930. <3>[ 135.358492] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  931. <6>[ 135.365542] mipi_dsi_ahb_ctrl: ahb clks already ON
  932. <6>[ 135.365573] mipi_dsi_clk_enable: mipi_dsi_clks already ON
  933. <6>[ 135.365603] set_esd_disable is called
  934. <3>[ 135.499771] dtv_pipe is not configured yet
  935. <6>[ 135.503128] [@@@@@mpu_dev_early_suspend@@@@@]
  936. <6>[ 135.503189] [mpu_early_notifier_callback] event = 3
  937. <6>[ 135.503464] Sensors unset: 7fff
  938. <6>[ 135.503708] sec_bat_early_suspend[BATT]...
  939. <6>[ 135.503799] active wake lock PowerManagerService
  940. <6>[ 135.503830] active wake lock msm_otg
  941. <6>[ 135.503891] PM: Syncing filesystems...
  942. <6>[ 135.549458] sync done.
  943. <6>[ 147.995513] Sensors unset: 7fff
  944. <6>[ 148.330138] alarm_release: clear alarm, pending 0
  945. <6>[ 148.330199] alarm_release: clear alarm, pending 0
  946. <6>[ 148.330230] alarm_release: clear alarm, pending 0
  947. <6>[ 148.330260] alarm_release: clear alarm, pending 0
  948. <6>[ 148.838943] request_suspend_state: wakeup (3->0) at 148840581923 (2012-09-28 02:33:59.352073249 UTC)
  949. <6>[ 148.839127] late_resume: call handlers
  950. <6>[ 148.839157] sec_bat_late_resume[BATT]...
  951. <6>[ 148.839188] [@@@@@mpu_dev_early_resume@@@@@]
  952. <6>[ 148.839249] [mpu_early_notifier_callback] event = 4
  953. <6>[ 148.908530] Active Reset: Resettig LCD 1...0..1
  954. <6>[ 148.935052] mipi_samsung_manufacture_id: manufacture_id1=a2
  955. <6>[ 148.935144] mipi_samsung_manufacture_id: manufacture_id2=60
  956. <6>[ 148.935235] mipi_samsung_manufacture_id: manufacture_id3=90
  957. <6>[ 148.935266] mipi_samsung_manufacture_id: manufacture_id=11ba6090
  958. <6>[ 148.935266] reset_gamma_level
  959. <6>[ 148.935266] Select 4.8 = 0(60)
  960. <6>[ 149.089577] set_esd_enable is called
  961. <6>[ 149.093667] mipi_samsung_disp_late_resume, enable blt mode
  962. <6>[ 149.093697] mipi_samsung_disp_late_resume
  963. <3>[ 149.113444] init: untracked pid 2183 exited
  964. <3>[ 149.116862] init: untracked pid 1265 exited
  965. <5>[ 149.129009] mms_ts 3-0048: mms_ts_resume: users=0
  966. <6>[ 149.129558] tsp 1.8V on is finished.
  967. <6>[ 149.130230] tsp 3.3V on is finished.
  968. <3>[ 149.141339] init: untracked pid 1002 exited
  969. <3>[ 149.145643] init: untracked pid 1017 exited
  970. <3>[ 149.150312] init: untracked pid 1033 exited
  971. <3>[ 149.167037] init: untracked pid 1051 exited
  972. <3>[ 149.170761] init: untracked pid 1841 exited
  973. <3>[ 149.197802] init: untracked pid 1654 exited
  974. <3>[ 149.201495] init: untracked pid 1100 exited
  975. <3>[ 149.218739] init: untracked pid 1582 exited
  976. <3>[ 149.222066] init: untracked pid 2013 exited
  977. <5>[ 149.258477] mms_ts 3-0048: TA disconnect!!!
  978. <6>[ 149.260552] cypress_power_on is finished.
  979. <7>[ 149.371829] [TouchKey] data[0]=50 data[1]=6 data[2]=5 data[3]=1
  980. <7>[ 149.430703] [Touchkey] autocal Enabled
  981. <7>[ 149.431497] LED returned on
  982. <3>[ 149.431619] cypress_touchkey 16-0020: not real interrupt (1).
  983. <6>[ 149.431649] late_resume: done
  984. <6>[ 149.588432] set_esd_enable_work_func is called
  985. <3>[ 149.603143] init: untracked pid 2052 exited
  986. <3>[ 149.607843] init: untracked pid 1345 exited
  987. <6>[ 149.608148] mtp_release
  988. <3>[ 149.611384] init: untracked pid 1233 exited
  989. <3>[ 149.615412] init: untracked pid 1331 exited
  990. <3>[ 149.633480] init: untracked pid 1731 exited
  991. <3>[ 149.659392] init: untracked pid 1744 exited
  992. <3>[ 149.702487] init: untracked pid 1490 exited
  993. <3>[ 149.712009] init: untracked pid 1427 exited
  994. <3>[ 149.715855] init: untracked pid 1361 exited
  995. <3>[ 149.722997] init: untracked pid 1160 exited
  996. <3>[ 149.738562] init: untracked pid 1695 exited
  997. <3>[ 149.741980] init: untracked pid 1791 exited
  998. <3>[ 149.746070] init: untracked pid 1880 exited
  999. <3>[ 149.758583] init: untracked pid 1903 exited
  1000. <3>[ 149.761910] init: untracked pid 1942 exited
  1001. <3>[ 149.772836] init: untracked pid 2026 exited
  1002. <3>[ 149.971921] init: untracked pid 1922 exited
  1003. <3>[ 149.975522] init: untracked pid 2087 exited
  1004. <3>[ 149.982145] init: untracked pid 1061 exited
  1005. <3>[ 149.985533] init: untracked pid 1141 exited
  1006. <3>[ 150.006500] store_afe_cal: offset 1092210176 is > mem_len 344064
  1007. <6>[ 150.036227] msm_pcm_routing_process_audio: reg 0 val 0 set 1
  1008. <6>[ 150.037692] msm8960_i2s_startup
  1009. <6>[ 150.042759] msm8660_i2s_hw_params Codec Clock c0c38538 Rx Bit Clock c0c37b30
  1010. <6>[ 150.042789] msm_pcm_routing_hw_params : channel = 2
  1011. <3>[ 150.545521] accel_open_calibration: Can't open calibration file
  1012. <6>[ 150.550831] Sensors unset: 7fff
  1013. <6>[ 150.878559] light_enable_store,new_value=1
  1014. <6>[ 151.208820] proximity_enable_store,new_value=1, prox_cal 0
  1015. <6>[ 151.494887] light_enable_store,new_value=0
  1016. <6>[ 151.496444] proximity_enable_store,new_value=0, prox_cal 0
  1017. <6>[ 152.066656] msm8960_i2s_shutdown Codec Clock c0c38538 Rx Bit Clock c0c37b30
  1018. <6>[ 152.066748] msm_pcm_routing_close : be_id = 0
  1019. <6>[ 152.118968] msm_pcm_routing_process_audio: reg 0 val 0 set 0
  1020. <6>[ 153.910453] max17040_work : VCELL:3862mV, AVGVCELL:3846mV
  1021. <6>[ 153.910514] max17040_work : Raw SOC:4234%, SOC:42%
  1022. <6>[ 153.912528] max17040_work : CONFIG:0x1c85, RATE:0x2f00
  1023. <6>[ 153.913474] max17040_work : STATUS:0xff01, temperature:30
  1024. <6>[ 153.928521] max17040 13-0036: 20c1h,af54h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,2f00h,067dh,ff01h,ffffh,
  1025. <7>[ 154.005554] led_blink input =0x000000 0 0
  1026. <7>[ 154.005554] , size=13
  1027. <4>[ 154.005981] [LED] USER : R:0,G:0,B:0
  1028. <7>[ 154.008301] led_blink input =0x000000 0 0
  1029. <7>[ 154.008301] , size=13
  1030. <4>[ 154.008759] [LED] USER : R:0,G:0,B:0
  1031. <7>[ 154.009583] tspdrv: Enable time = 0 msec
  1032. <6>[ 159.159041] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  1033. <6>[ 159.669433] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  1034. <6>[ 159.669494] sec_bat_monitor_work: battery check is present (1 time )
  1035. <6>[ 159.672577] [battery] level(42), vcell(3885000), therm(303)
  1036. <6>[ 159.672607] [battery] cable_type(1), chg_status(1), health(1)
  1037. <6>[ 159.672668] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  1038. <6>[ 186.491561] max17040_work : VCELL:3890mV, AVGVCELL:3877mV
  1039. <6>[ 186.491622] max17040_work : Raw SOC:4234%, SOC:42%
  1040. <6>[ 186.493636] max17040_work : CONFIG:0x1c85, RATE:0x2300
  1041. <6>[ 186.494674] max17040_work : STATUS:0xff01, temperature:30
  1042. <6>[ 186.508774] max17040 13-0036: 80c2h,af54h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,2300h,067dh,ff01h,ffffh,
  1043. <6>[ 189.928826] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  1044. <6>[ 190.438547] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  1045. <6>[ 190.438608] sec_bat_monitor_work: battery check is present (1 time )
  1046. <6>[ 190.441690] [battery] level(42), vcell(3891250), therm(303)
  1047. <6>[ 190.441721] [battery] cable_type(1), chg_status(1), health(1)
  1048. <6>[ 190.441782] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  1049. <6>[ 217.050846] max17040_work : VCELL:3891mV, AVGVCELL:3883mV
  1050. <6>[ 217.050907] max17040_work : Raw SOC:4263%, SOC:42%
  1051. <6>[ 217.052922] max17040_work : CONFIG:0x1c85, RATE:0x6f00
  1052. <6>[ 217.053929] max17040_work : STATUS:0xff01, temperature:30
  1053. <6>[ 217.068731] max17040 13-0036: 90c2h,4655h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,6f00h,067dh,ff01h,ffffh,
  1054. <6>[ 220.998596] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  1055. <6>[ 221.509507] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  1056. <6>[ 221.509568] sec_bat_monitor_work: battery check is present (1 time )
  1057. <6>[ 221.512650] [battery] level(42), vcell(3891250), therm(303)
  1058. <6>[ 221.512681] [battery] cable_type(1), chg_status(1), health(1)
  1059. <6>[ 221.512742] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  1060. <6>[ 250.670746] max17040_work : VCELL:3895mV, AVGVCELL:3890mV
  1061. <6>[ 250.670807] max17040_work : Raw SOC:4263%, SOC:42%
  1062. <6>[ 250.672821] max17040_work : CONFIG:0x1c85, RATE:0x5300
  1063. <6>[ 250.673859] max17040_work : STATUS:0xff01, temperature:30
  1064. <6>[ 250.691286] max17040 13-0036: c0c2h,4655h,0000h,1100h,0000h,1c85h,ffffh,ffffh,ffffh,ff00h,5300h,067dh,ff01h,ffffh,
  1065. <6>[ 251.938806] pm8921_enable_batt_therm: [pm8921] enable Vref_batt_therm
  1066. <6>[ 252.448741] pm8921_enable_batt_therm: [pm8921] disable Vref_batt_therm
  1067. <6>[ 252.448802] sec_bat_monitor_work: battery check is present (1 time )
  1068. <6>[ 252.451793] [battery] level(42), vcell(3885000), therm(302)
  1069. <6>[ 252.451854] [battery] cable_type(1), chg_status(1), health(1)
  1070. <6>[ 252.451884] [battery] timeout_chgstp(0), chg_enabled(1), rechg_status(0)
  1071. <3>[ 271.339813] init: sys_prop: permission denied uid:2000 name:sys.media.vdec.sw
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!