Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@cephstore6358:~# ./megacli -AdpAllInfo -aAll
- Adapter #0
- ==============================================================================
- Versions
- ================
- Product Name : PERC 6/i Integrated
- Serial No : 1122334455667788
- FW Package Build: 6.3.0-0001
- Mfg. Data
- ================
- Mfg. Date : 06/24/08
- Rework Date : 06/24/08
- Revision No :
- Battery FRU : N/A
- Image Versions in Flash:
- ================
- FW Version : 1.22.12-0952
- BIOS Version : 2.04.00
- WebBIOS Version : 1.1-46-e_15-Rel
- Ctrl-R Version : 1.02-015B
- Preboot CLI Version: 01.00-023:#%00006
- Boot Block Version : 1.00.00.01-0011
- Pending Images in Flash
- ================
- None
- PCI Info
- ================
- Vendor Id : 1000
- Device Id : 0060
- SubVendorId : 1028
- SubDeviceId : 1f0c
- Host Interface : PCIE
- Number of Frontend Port: 0
- Device Interface : PCIE
- Number of Backend Port: 8
- Port : Address
- 0 5000c500340cc7e5
- 1 5000c500341288a9
- 2 5000c500341a9825
- 3 5000c5003419f329
- 4 5000c500341a8bb5
- 5 5000c500341a4edd
- 6 5000c5003416fbc5
- 7 5000c50034149f61
- HW Configuration
- ================
- SAS Address : 5782bcb023065700
- BBU : Present
- Alarm : Absent
- NVRAM : Present
- Serial Debugger : Present
- Memory : Present
- Flash : Present
- Memory Size : 256MB
- TPM : Absent
- Settings
- ================
- Current Time : 18:9:39 11/22, 2011
- Predictive Fail Poll Interval : 300sec
- Interrupt Throttle Active Count : 16
- Interrupt Throttle Completion : 50us
- Rebuild Rate : 30%
- PR Rate : 30%
- Resynch Rate : 30%
- Check Consistency Rate : 30%
- Reconstruction Rate : 30%
- Cache Flush Interval : 4s
- Max Drives to Spinup at One Time : 2
- Delay Among Spinup Groups : 12s
- Physical Drive Coercion Mode : 128MB
- Cluster Mode : Disabled
- Alarm : Disabled
- Auto Rebuild : Enabled
- Battery Warning : Enabled
- Ecc Bucket Size : 15
- Ecc Bucket Leak Rate : 1440 Minutes
- Restore HotSpare on Insertion : Disabled
- Expose Enclosure Devices : Disabled
- Maintain PD Fail History : Disabled
- Host Request Reordering : Enabled
- Auto Detect BackPlane Enabled : SGPIO/i2c SEP
- Load Balance Mode : Auto
- Use FDE Only : No
- Security Key Assigned : No
- Security Key Failed : No
- Security Key Not Backedup : No
- Any Offline VD Cache Preserved : No
- Capabilities
- ================
- RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported
- Supported Drives : SAS, SATA
- Allowed Mixing:
- Mix in Enclosure Allowed
- Status
- ================
- ECC Bucket Count : 0
- Limitations
- ================
- Max Arms Per VD : 32
- Max Spans Per VD : 8
- Max Arrays : 128
- Max Number of VDs : 64
- Max Parallel Commands : 1008
- Max SGE Count : 80
- Max Data Transfer Size : 8192 sectors
- Max Strips PerIO : 42
- Min Stripe Size : 8 KB
- Max Stripe Size : 1.0 MB
- Device Present
- ================
- Virtual Drives : 15
- Degraded : 0
- Offline : 0
- Physical Devices : 9
- Disks : 8
- Critical Disks : 0
- Failed Disks : 0
- Supported Adapter Operations
- ================
- Rebuild Rate : Yes
- CC Rate : Yes
- BGI Rate : Yes
- Reconstruct Rate : Yes
- Patrol Read Rate : Yes
- Alarm Control : Yes
- Cluster Support : No
- BBU : Yes
- Spanning : Yes
- Dedicated Hot Spare : Yes
- Revertible Hot Spares : Yes
- Foreign Config Import : Yes
- Self Diagnostic : Yes
- Allow Mixed Redundancy on Array : No
- Global Hot Spares : Yes
- Deny SCSI Passthrough : No
- Deny SMP Passthrough : No
- Deny STP Passthrough : No
- Support Security : No
- Supported VD Operations
- ================
- Read Policy : Yes
- Write Policy : Yes
- IO Policy : Yes
- Access Policy : Yes
- Disk Cache Policy : Yes
- Reconstruction : Yes
- Deny Locate : No
- Deny CC : No
- Allow Ctrl Encryption: No
- Supported PD Operations
- ================
- Force Online : Yes
- Force Offline : Yes
- Force Rebuild : Yes
- Deny Force Failed : No
- Deny Force Good/Bad : No
- Deny Missing Replace : No
- Deny Clear : No
- Deny Locate : No
- Disable Copyback : No
- Enable Copyback on SMART : No
- Enable Copyback to SSD on SMART Error : No
- Enable SSD Patrol Read : No
- Error Counters
- ================
- Memory Correctable Errors : 0
- Memory Uncorrectable Errors : 0
- Cluster Information
- ================
- Cluster Permitted : No
- Cluster Active : No
- Default Settings
- ================
- Phy Polarity : 0
- Phy PolaritySplit : 0
- Background Rate : 30
- Stripe Size : 64kB
- Flush Time : 4 seconds
- Write Policy : WB
- Read Policy : None
- Cache When BBU Bad : Disabled
- Cached IO : No
- SMART Mode : Mode 6
- Alarm Disable : No
- Coercion Mode : 128MB
- ZCR Config : Unknown
- Dirty LED Shows Drive Activity : No
- BIOS Continue on Error : No
- Spin Down Mode : None
- Allowed Device Type : SAS/SATA Mix
- Allow Mix in Enclosure : Yes
- Allow HDD SAS/SATA Mix in VD : No
- Allow SSD SAS/SATA Mix in VD : No
- Allow HDD/SSD Mix in VD : No
- Allow SATA in Cluster : No
- Max Chained Enclosures : 1
- Disable Ctrl-R : No
- Enable Web BIOS : No
- Direct PD Mapping : Yes
- BIOS Enumerate VDs : Yes
- Restore Hot Spare on Insertion : No
- Expose Enclosure Devices : No
- Maintain PD Fail History : No
- Disable Puncturing : No
- Zero Based Enclosure Enumeration : Yes
- PreBoot CLI Enabled : No
- LED Show Drive Activity : No
- Cluster Disable : Yes
- SAS Disable : No
- Auto Detect BackPlane Enable : SGPIO/i2c SEP
- Use FDE Only : No
- Enable Led Header : No
- Delay during POST : 0
- Exit Code: 0x00
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement