Advertisement
Guest User

Untitled

a guest
Sep 13th, 2016
174
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.25 KB | None | 0 0
  1.  
  2.  
  3. U-Boot 2016.03 (Sep 13 2016 - 20:27:44 -0700)
  4.  
  5. Model: Digilent-Zybo-Linux-BD-v2015.4
  6. Board: Xilinx Zynq
  7. I2C: ready
  8. DRAM: ECC disabled 512 MiB
  9. MMC: sdhci@e0100000: 0
  10. SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
  11. *** Warning - bad CRC, using default environment
  12.  
  13. In: serial
  14. Out: serial
  15. Err: serial
  16. Net: ZYNQ GEM: e000b000, phyaddr 1, interface rgmii-id
  17.  
  18. Warning: ethernet@e000b000 using MAC address from ROM
  19. eth0: ethernet@e000b000
  20. U-BOOT for Digilent-Zybo-Linux-BD-v2015_4
  21.  
  22. ethernet@e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  23. ethernet@e000b000: No link.
  24. Hit any key to stop autoboot: 0
  25. Device: sdhci@e0100000
  26. Manufacturer ID: 1b
  27. OEM: 534d
  28. Name: 00000
  29. Tran Speed: 50000000
  30. Rd Block Len: 512
  31. SD version 3.0
  32. High Capacity: Yes
  33. Capacity: 29.8 GiB
  34. Bus Width: 4-bit
  35. Erase Group Size: 512 Bytes
  36. reading image.ub
  37. 6438464 bytes read in 556 ms (11 MiB/s)
  38. ## Loading kernel from FIT Image at 04000000 ...
  39. Using 'conf@1' configuration
  40. Verifying Hash Integrity ... OK
  41. Trying 'kernel@1' kernel subimage
  42. Description: PetaLinux Kernel
  43. Type: Kernel Image
  44. Compression: gzip compressed
  45. Data Start: 0x040000f0
  46. Data Size: 6411586 Bytes = 6.1 MiB
  47. Architecture: ARM
  48. OS: Linux
  49. Load Address: 0x00008000
  50. Entry Point: 0x00008000
  51. Hash algo: crc32
  52. Hash value: 88f6573f
  53. Verifying Hash Integrity ... crc32+ OK
  54. ## Loading fdt from FIT Image at 04000000 ...
  55. Using 'conf@1' configuration
  56. Trying 'fdt@1' fdt subimage
  57. Description: Flattened Device Tree blob
  58. Type: Flat Device Tree
  59. Compression: uncompressed
  60. Data Start: 0x0461d718
  61. Data Size: 25580 Bytes = 25 KiB
  62. Architecture: ARM
  63. Hash algo: crc32
  64. Hash value: a822c6d9
  65. Verifying Hash Integrity ... crc32+ OK
  66. Booting using the fdt blob at 0x461d718
  67. Uncompressing Kernel Image ... OK
  68. Loading Device Tree to 07ff6000, end 07fff3eb ... OK
  69.  
  70. Starting kernel ...
  71.  
  72. Booting Linux on physical CPU 0x0
  73. Linux version 4.0.0-xilinx (zynq@Zynq) (gcc version 4.9.2 (Sourcery CodeBench Lite 2015.05-17) ) #11 SMP PREEMPT Tue Sep 13 20:28:06 PDT 2016
  74. CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  75. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  76. Machine model: Digilent-Zybo-Linux-BD-v2015.4
  77. bootconsole [earlycon0] enabled
  78. cma: Reserved 40 MiB at 0x1d800000
  79. Memory policy: Data cache writealloc
  80. PERCPU: Embedded 11 pages/cpu @dd3bc000 s12672 r8192 d24192 u45056
  81. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  82. Kernel command line: console=ttyPS0,115200 earlyprintk
  83. PID hash table entries: 2048 (order: 1, 8192 bytes)
  84. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  85. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  86. Memory: 468548K/524288K available (4767K kernel code, 223K rwdata, 1720K rodata, 3044K init, 208K bss, 14780K reserved, 40960K cma-reserved, 0K highmem)
  87. Virtual kernel memory layout:
  88. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  89. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  90. vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  91. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  92. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  93. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  94. .text : 0xc0008000 - 0xc065e0ec (6489 kB)
  95. .init : 0xc065f000 - 0xc0958000 (3044 kB)
  96. .data : 0xc0958000 - 0xc098ff60 ( 224 kB)
  97. .bss : 0xc098ff60 - 0xc09c42f4 ( 209 kB)
  98. Preemptible hierarchical RCU implementation.
  99. Additional per-CPU info printed with stalls.
  100. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  101. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  102. NR_IRQS:16 nr_irqs:16 16
  103. L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  104. L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  105. L2C-310 erratum 769419 enabled
  106. L2C-310 enabling early BRESP for Cortex-A9
  107. L2C-310 full line of zeros enabled for Cortex-A9
  108. L2C-310 ID prefetch enabled, offset 1 lines
  109. L2C-310 dynamic clock gating enabled, standby mode enabled
  110. L2C-310 cache controller enabled, 8 ways, 512 kB
  111. L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  112. slcr mapped to e0804000
  113. zynq_clock_init: clkc starts at e0804100
  114. Zynq clock init
  115. sched_clock: 64 bits at 325MHz, resolution 3ns, wraps every 3383112499200ns
  116. timer #0 at e0808000, irq=17
  117. Console: colour dummy device 80x30
  118. Calibrating delay loop... 1292.69 BogoMIPS (lpj=6463488)
  119. pid_max: default: 32768 minimum: 301
  120. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  121. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  122. CPU: Testing write buffer coherency: ok
  123. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  124. Setting up static identity map for 0x483ab0 - 0x483b08
  125. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  126. Brought up 2 CPUs
  127. SMP: Total of 2 processors activated (2591.94 BogoMIPS).
  128. CPU: All CPU(s) started in SVC mode.
  129. devtmpfs: initialized
  130. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  131. pinctrl core: initialized pinctrl subsystem
  132. NET: Registered protocol family 16
  133. DMA: preallocated 256 KiB pool for atomic coherent allocations
  134. cpuidle: using governor ladder
  135. cpuidle: using governor menu
  136. hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  137. hw-breakpoint: maximum watchpoint size is 4 bytes.
  138. zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0880000
  139. GPIO IRQ not connected
  140. XGpio: /amba_pl/gpio@41210000: registered, base is 902
  141. XGpio: /amba_pl/gpio@41230000: registered, base is 901
  142. GPIO IRQ not connected
  143. XGpio: /amba_pl/gpio@41250000: registered, base is 899
  144. GPIO IRQ not connected
  145. XGpio: /amba_pl/gpio@41250000: dual channel registered, base is 897
  146. GPIO IRQ not connected
  147. XGpio: /amba_pl/gpio@41200000: registered, base is 893
  148. GPIO IRQ not connected
  149. XGpio: /amba_pl/gpio@41260000: registered, base is 889
  150. GPIO IRQ not connected
  151. XGpio: /amba_pl/gpio@41220000: registered, base is 885
  152. GPIO IRQ not connected
  153. XGpio: /amba_pl/gpio@41240000: registered, base is 883
  154. GPIO IRQ not connected
  155. XGpio: /amba_pl/gpio@41240000: dual channel registered, base is 879
  156. vgaarb: loaded
  157. SCSI subsystem initialized
  158. usbcore: registered new interface driver usbfs
  159. usbcore: registered new interface driver hub
  160. usbcore: registered new device driver usb
  161. usb_phy@0 supply vcc not found, using dummy regulator
  162. media: Linux media interface: v0.10
  163. Linux video capture interface: v2.00
  164. pps_core: LinuxPPS API ver. 1 registered
  165. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  166. PTP clock support registered
  167. EDAC MC: Ver: 3.0.0
  168. Advanced Linux Sound Architecture Driver Initialized.
  169. Switched to clocksource arm_global_timer
  170. NET: Registered protocol family 2
  171. TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  172. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  173. TCP: Hash tables configured (established 4096 bind 4096)
  174. TCP: reno registered
  175. UDP hash table entries: 256 (order: 1, 8192 bytes)
  176. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  177. NET: Registered protocol family 1
  178. RPC: Registered named UNIX socket transport module.
  179. RPC: Registered udp transport module.
  180. RPC: Registered tcp transport module.
  181. RPC: Registered tcp NFSv4.1 backchannel transport module.
  182. hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  183. futex hash table entries: 512 (order: 3, 32768 bytes)
  184. jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  185. io scheduler noop registered
  186. io scheduler deadline registered
  187. io scheduler cfq registered (default)
  188. zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
  189. dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
  190. dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  191. xilinx-vdma 43000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  192. e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 145, base_baud = 6250000) is a xuartps
  193. console [ttyPS0] enabled
  194. bootconsole [earlycon0] disabled
  195.  
  196. Built with PetaLinux v2015.4 (Yocto 1.8) Digilent-Zybo-Linux-BD-v2015_4 /dev/ttyPS1
  197. Digilent-Zybo-Linux-BD-v2015_4 login: root
  198. Password:
  199. root@Digilent-Zybo-Linux-BD-v2015_4:~# cat /proc/interrupts
  200. CPU0 CPU1
  201. 16: 0 0 GIC 27 gt
  202. 17: 0 0 GIC 43 ttc_clockevent
  203. 18: 426 372 GIC 29 twd
  204. 21: 43 0 GIC 39 f8007100.adc
  205. 141: 8 0 GIC 57 cdns-i2c
  206. GPIO IRQ not connected
  207. XGpio: /amba_pl/gpio@41210000: registered, base is 902
  208. XGpio: /amba_pl/gpio@41230000: registered, base is 901
  209. GPIO IRQ not connected
  210. XGpio: /amba_pl/gpio@41250000: registered, base is 899
  211. GPIO IRQ not connected
  212. XGpio: /amba_pl/gpio@41250000: dual channel registered, base is 897
  213. GPIO IRQ not connected
  214. XGpio: /amba_pl/gpio@41200000: registered, base is 893
  215. GPIO IRQ not connected
  216. XGpio: /amba_pl/gpio@41260000: registered, base is 889
  217. GPIO IRQ not connected
  218. XGpio: /amba_pl/gpio@41220000: registered, base is 885
  219. GPIO IRQ not connected
  220. XGpio: /amba_pl/gpio@41240000: registered, base is 883
  221. GPIO IRQ not connected
  222. XGpio: /amba_pl/gpio@41240000: dual channel registered, base is 879
  223. vgaarb: loaded
  224. SCSI subsystem initialized
  225. usbcore: registered new interface driver usbfs
  226. usbcore: registered new interface driver hub
  227. usbcore: registered new device driver usb
  228. usb_phy@0 supply vcc not found, using dummy regulator
  229. media: Linux media interface: v0.10
  230. Linux video capture interface: v2.00
  231. pps_core: LinuxPPS API ver. 1 registered
  232. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  233. PTP clock support registered
  234. EDAC MC: Ver: 3.0.0
  235. Advanced Linux Sound Architecture Driver Initialized.
  236. Switched to clocksource arm_global_timer
  237. NET: Registered protocol family 2
  238. TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  239. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  240. TCP: Hash tables configured (established 4096 bind 4096)
  241. TCP: reno registered
  242. UDP hash table entries: 256 (order: 1, 8192 bytes)
  243. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  244. NET: Registered protocol family 1
  245. RPC: Registered named UNIX socket transport module.
  246. RPC: Registered udp transport module.
  247. RPC: Registered tcp transport module.
  248. RPC: Registered tcp NFSv4.1 backchannel transport module.
  249. hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  250. futex hash table entries: 512 (order: 3, 32768 bytes)
  251. jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  252. io scheduler noop registered
  253. io scheduler deadline registered
  254. io scheduler cfq registered (default)
  255. zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
  256. dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
  257. dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  258. xilinx-vdma 43000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  259. e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 145, base_baud = 6250000) is a xuartps
  260. console [ttyPS0] enabled
  261. bootconsole [earlycon0] disabled
  262.  
  263. Built with PetaLinux v2015.4 (Yocto 1.8) Digilent-Zybo-Linux-BD-v2015_4 /dev/ttyPS1
  264. Digilent-Zybo-Linux-BD-v2015_4 login: root
  265. Password:
  266. root@Digilent-Zybo-Linux-BD-v2015_4:~# cat /proc/interrupts
  267. CPU0 CPU1
  268. 16: 0 0 GIC 27 gt
  269. 17: 0 0 GIC 43 ttc_clockevent
  270. 18: 426 372 GIC 29 twd
  271. 21: 43 0 GIC 39 f8007100.adc
  272. 141: 8 0 GIC 57 cdns-i2c
  273. 142: 5 0 GIC 80 cdns-i2c
  274. 144: 0 0 GIC 35 f800c000.ocmc
  275. 145: 28 0 GIC 59 xuartps
  276. 146: 50 0 GIC 82 xuartps
  277. 147: 0 0 GIC 58 e0006000.spi
  278. 148: 0 0 GIC 81 e0007000.spi
  279. 149: 3 0 GIC 51 e000d000.spi
  280. 150: 0 0 GIC 54 eth0
  281. 151: 81 0 GIC 56 mmc0
  282. 152: 0 0 GIC 45 f8003000.dmac
  283. 153: 0 0 GIC 46 f8003000.dmac
  284. 154: 0 0 GIC 47 f8003000.dmac
  285. 155: 0 0 GIC 48 f8003000.dmac
  286. 156: 0 0 GIC 49 f8003000.dmac
  287. 157: 0 0 GIC 72 f8003000.dmac
  288. 158: 0 0 GIC 73 f8003000.dmac
  289. 159: 0 0 GIC 74 f8003000.dmac
  290. 160: 0 0 GIC 75 f8003000.dmac
  291. 161: 0 0 GIC 40 f8007000.devcfg
  292. 167: 0 0 GIC 53 e0002000.usb
  293. 168: 0 0 GIC 41 f8005000.watchdog
  294. 172: 0 0 GIC 62 xilinx-vdma-controller
  295. 173: 0 0 GIC 63 xilinx_vtc
  296. IPI1: 0 0 Timer broadcast interrupts
  297. IPI2: 939 698 Rescheduling interrupts
  298. IPI3: 0 0 Function call interrupts
  299. IPI4: 11 40 Single function call interrupts
  300. IPI5: 0 0 CPU stop interrupts
  301. IPI6: 0 0 IRQ work interrupts
  302. IPI7: 0 0 completion interrupts
  303. Err: 0
  304. root@Digilent-Zybo-Linux-BD-v2015_4:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement