Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.7-gentoo-r1 (root@ramb00000) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.3, pie-0.5.5) ) #15 SMP Tue Oct 29 19:52:32 PDT 2013
- [ 0.000000] Command line: BOOT_IMAGE=/kernel-3.10.7-gentoo-r1 root=/dev/sdd1 ro
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe6ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000dfe70000-0x00000000dfe87fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000dfe88000-0x00000000dfedbfff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000dfedc000-0x00000000dfffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: System manufacturer System Product Name/P7P55D-E PRO, BIOS 1703 06/26/2012
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x320000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-D3FFF write-protect
- [ 0.000000] D4000-DFFFF uncachable
- [ 0.000000] E0000-E7FFF write-through
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask E00000000 write-back
- [ 0.000000] 1 base 200000000 mask F00000000 write-back
- [ 0.000000] 2 base 300000000 mask FE0000000 write-back
- [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x020c7000, 0x020c7fff] PGTABLE
- [ 0.000000] BRK [0x020c8000, 0x020c8fff] PGTABLE
- [ 0.000000] BRK [0x020c9000, 0x020c9fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x31fe00000-0x31fffffff]
- [ 0.000000] [mem 0x31fe00000-0x31fffffff] page 2M
- [ 0.000000] BRK [0x020ca000, 0x020cafff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x31c000000-0x31fdfffff]
- [ 0.000000] [mem 0x31c000000-0x31fdfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x300000000-0x31bffffff]
- [ 0.000000] [mem 0x300000000-0x31bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfe6ffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M
- [ 0.000000] [mem 0xdfe00000-0xdfe6ffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
- [ 0.000000] [mem 0x100000000-0x2ffffffff] page 2M
- [ 0.000000] BRK [0x020cb000, 0x020cbfff] PGTABLE
- [ 0.000000] ACPI: RSDP 00000000000fbb00 00024 (v02 ACPIAM)
- [ 0.000000] ACPI: XSDT 00000000dfe70100 00064 (v01 062612 XSDT1924 20120626 MSFT 00000097)
- [ 0.000000] ACPI: FACP 00000000dfe70290 000F4 (v03 062612 FACP1924 20120626 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 00000000dfe704a0 0EE6E (v01 A1513 A1513003 00000003 INTL 20060113)
- [ 0.000000] ACPI: FACS 00000000dfe88000 00040
- [ 0.000000] ACPI: APIC 00000000dfe70390 000CC (v01 062612 APIC1924 20120626 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 00000000dfe70460 0003C (v01 062612 OEMMCFG 20120626 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 00000000dfe88040 00072 (v01 062612 OEMB1924 20120626 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000dfe7f310 00038 (v01 062612 OEMHPET 20120626 MSFT 00000097)
- [ 0.000000] ACPI: ASPT 00000000dfe7f5b0 00034 (v06 062612 PerfTune 20120626 MSFT 00000097)
- [ 0.000000] ACPI: OSFR 00000000dfe7f5f0 000B0 (v01 062612 OEMOSFR 20120626 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 00000000dfe896d0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x31fffffff]
- [ 0.000000] NODE_DATA [mem 0x31fff1000-0x31fff4fff]
- [ 0.000000] [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880313600000-ffff88031f5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x31fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0xdfe6ffff]
- [ 0.000000] node 0: [mem 0x100000000-0x31fffffff]
- [ 0.000000] On node 0 totalpages: 3145228
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14266 pages used for memmap
- [ 0.000000] DMA32 zone: 913008 pages, LIFO batch:31
- [ 0.000000] Normal zone: 34816 pages used for memmap
- [ 0.000000] Normal zone: 2228224 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] smpboot: 16 Processors exceeds NR_CPUS limit of 8
- [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000dfe70000 - 00000000dfe88000
- [ 0.000000] PM: Registered nosave memory: 00000000dfe88000 - 00000000dfedc000
- [ 0.000000] PM: Registered nosave memory: 00000000dfedc000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
- [ 0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88031fc00000 s79808 r8192 d22592 u262144
- [ 0.000000] pcpu-alloc: s79808 r8192 d22592 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096061
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-3.10.7-gentoo-r1 root=/dev/sdd1 ro
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 12299896k/13107200k available (8565k kernel code, 526288k absent, 281016k reserved, 6561k data, 1008k init)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 2674.859 MHz processor
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5349.71 BogoMIPS (lpj=2674859)
- [ 0.000163] pid_max: default: 32768 minimum: 301
- [ 0.000260] Security Framework initialized
- [ 0.000347] SELinux: Initializing.
- [ 0.000430] SELinux: Starting in permissive mode
- [ 0.001189] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.004478] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.005891] Mount-cache hash table entries: 256
- [ 0.006125] Initializing cgroup subsys freezer
- [ 0.006221] CPU: Physical Processor ID: 0
- [ 0.006309] CPU: Processor Core ID: 0
- [ 0.006389] mce: CPU supports 9 MCE banks
- [ 0.006475] CPU0: Thermal monitoring enabled (TM1)
- [ 0.006561] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
- Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
- tlb_flushall_shift: 6
- [ 0.006832] Freeing SMP alternatives: 32k freed
- [ 0.006917] ACPI: Core revision 20130328
- [ 0.010544] ACPI: All ACPI Tables successfully acquired
- [ 0.092464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.102551] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
- [ 0.204393] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
- [ 0.204644] perf_event_intel: CPU erratum AAJ80 worked around
- [ 0.204725] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
- [ 0.204809] ... version: 3
- [ 0.204887] ... bit width: 48
- [ 0.204965] ... generic registers: 4
- [ 0.205043] ... value mask: 0000ffffffffffff
- [ 0.205123] ... max period: 000000007fffffff
- [ 0.205203] ... fixed-purpose events: 3
- [ 0.205281] ... event mask: 000000070000000f
- [ 0.205547] smpboot: Booting Node 0, Processors #1 #2 #3
- [ 0.245510] Brought up 4 CPUs
- [ 0.245662] smpboot: Total of 4 processors activated (21398.87 BogoMIPS)
- [ 0.248313] devtmpfs: initialized
- [ 0.248536] PM: Registering ACPI NVS region [mem 0xdfe88000-0xdfedbfff] (344064 bytes)
- [ 0.248737] kworker/u16:0 (26) used greatest stack depth: 5720 bytes left
- [ 0.248829] xor: measuring software checksum speed
- [ 0.258408] prefetch64-sse: 10920.000 MB/sec
- [ 0.268411] generic_sse: 9676.000 MB/sec
- [ 0.268490] xor: using function: prefetch64-sse (10920.000 MB/sec)
- [ 0.268592] RTC time: 3:47:59, date: 11/08/13
- [ 0.268705] NET: Registered protocol family 16
- [ 0.269047] ACPI: bus type PCI registered
- [ 0.269182] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.269311] PCI: not using MMCONFIG
- [ 0.269388] PCI: Using configuration type 1 for base access
- [ 0.274942] bio: create slab <bio-0> at 0
- [ 0.291423] raid6: sse2x1 6664 MB/s
- [ 0.308426] raid6: sse2x2 7761 MB/s
- [ 0.325431] raid6: sse2x4 8597 MB/s
- [ 0.325509] raid6: using algorithm sse2x4 (8597 MB/s)
- [ 0.325589] raid6: using ssse3x2 recovery algorithm
- [ 0.325728] ACPI: Added _OSI(Module Device)
- [ 0.325808] ACPI: Added _OSI(Processor Device)
- [ 0.325887] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.325966] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.327171] ACPI: EC: Look up EC in DSDT
- [ 0.328287] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.334447] ACPI: SSDT 00000000dfe880c0 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
- [ 0.334945] ACPI: Dynamic OEM Table Load:
- [ 0.335085] ACPI: SSDT (null) 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
- [ 0.335340] ACPI: SSDT 00000000dfe891f0 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
- [ 0.335797] ACPI: Dynamic OEM Table Load:
- [ 0.335937] ACPI: SSDT (null) 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
- [ 0.336389] ACPI: Interpreter enabled
- [ 0.337270] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
- [ 0.337469] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.337549] ACPI: Using IOAPIC for interrupt routing
- [ 0.337643] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.338771] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
- [ 0.342102] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.342312] ACPI: No dock devices found.
- [ 0.349789] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.350060] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
- [ 0.350236] PCI host bridge to bus 0000:00
- [ 0.350316] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.350398] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.350483] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.350566] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.350649] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
- [ 0.350732] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
- [ 0.350815] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
- [ 0.350906] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
- [ 0.351012] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
- [ 0.351057] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
- [ 0.351090] pci 0000:00:03.0: System wakeup disabled by ACPI
- [ 0.351211] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
- [ 0.351319] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
- [ 0.351422] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
- [ 0.351528] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
- [ 0.351628] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
- [ 0.351721] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
- [ 0.351839] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
- [ 0.351859] pci 0000:00:1a.0: reg 10: [mem 0xf3ffe000-0xf3ffe3ff]
- [ 0.351940] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.351967] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.352091] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
- [ 0.352105] pci 0000:00:1b.0: reg 10: [mem 0xf3ff8000-0xf3ffbfff 64bit]
- [ 0.352165] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.352241] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
- [ 0.352303] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.352341] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.352464] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
- [ 0.352526] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.352565] pci 0000:00:1c.4: System wakeup disabled by ACPI
- [ 0.352686] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
- [ 0.352748] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.352787] pci 0000:00:1c.5: System wakeup disabled by ACPI
- [ 0.352908] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
- [ 0.352970] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 0.353010] pci 0000:00:1c.6: System wakeup disabled by ACPI
- [ 0.353130] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
- [ 0.353191] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- [ 0.353232] pci 0000:00:1c.7: System wakeup disabled by ACPI
- [ 0.353356] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
- [ 0.353376] pci 0000:00:1d.0: reg 10: [mem 0xf3ffd000-0xf3ffd3ff]
- [ 0.353460] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.353482] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.353601] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
- [ 0.353656] pci 0000:00:1e.0: System wakeup disabled by ACPI
- [ 0.353777] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
- [ 0.353922] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
- [ 0.353940] pci 0000:00:1f.2: reg 10: [io 0x8880-0x8887]
- [ 0.353947] pci 0000:00:1f.2: reg 14: [io 0x8800-0x8803]
- [ 0.353953] pci 0000:00:1f.2: reg 18: [io 0x8480-0x8487]
- [ 0.353960] pci 0000:00:1f.2: reg 1c: [io 0x8400-0x8403]
- [ 0.353967] pci 0000:00:1f.2: reg 20: [io 0x8080-0x809f]
- [ 0.353974] pci 0000:00:1f.2: reg 24: [mem 0xf3ff7000-0xf3ff77ff]
- [ 0.354015] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.354090] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
- [ 0.354103] pci 0000:00:1f.3: reg 10: [mem 0xf3ffc000-0xf3ffc0ff 64bit]
- [ 0.354122] pci 0000:00:1f.3: reg 20: [io 0xffe0-0xffff]
- [ 0.354257] pci 0000:01:00.0: [10de:0641] type 00 class 0x030000
- [ 0.354267] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
- [ 0.354276] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.354286] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
- [ 0.354293] pci 0000:01:00.0: reg 24: [io 0x9c00-0x9c7f]
- [ 0.354299] pci 0000:01:00.0: reg 30: [mem 0xf7880000-0xf78fffff pref]
- [ 0.355459] pci 0000:00:03.0: PCI bridge to [bus 01]
- [ 0.355552] pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]
- [ 0.355555] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf78fffff]
- [ 0.355558] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.355631] pci 0000:06:00.0: [10b5:8608] type 01 class 0x060400
- [ 0.355645] pci 0000:06:00.0: reg 10: [mem 0xf7be0000-0xf7bfffff]
- [ 0.355722] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
- [ 0.355746] pci 0000:06:00.0: System wakeup disabled by ACPI
- [ 0.357472] pci 0000:00:1c.0: PCI bridge to [bus 06-0b]
- [ 0.357565] pci 0000:00:1c.0: bridge window [io 0xc000-0xdfff]
- [ 0.357568] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7efffff]
- [ 0.357663] pci 0000:07:01.0: [10b5:8608] type 01 class 0x060400
- [ 0.357753] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
- [ 0.357824] pci 0000:07:05.0: [10b5:8608] type 01 class 0x060400
- [ 0.357914] pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
- [ 0.357984] pci 0000:07:07.0: [10b5:8608] type 01 class 0x060400
- [ 0.358074] pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
- [ 0.358097] pci 0000:07:07.0: System wakeup disabled by ACPI
- [ 0.358230] pci 0000:07:09.0: [10b5:8608] type 01 class 0x060400
- [ 0.358320] pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
- [ 0.358345] pci 0000:07:09.0: System wakeup disabled by ACPI
- [ 0.358490] pci 0000:06:00.0: PCI bridge to [bus 07-0b]
- [ 0.358576] pci 0000:06:00.0: bridge window [io 0xc000-0xdfff]
- [ 0.358580] pci 0000:06:00.0: bridge window [mem 0xf7c00000-0xf7efffff]
- [ 0.358684] pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
- [ 0.358710] pci 0000:08:00.0: reg 10: [mem 0xf7cfe000-0xf7cfffff 64bit]
- [ 0.358838] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
- [ 0.360488] pci 0000:07:01.0: PCI bridge to [bus 08]
- [ 0.360586] pci 0000:07:01.0: bridge window [mem 0xf7c00000-0xf7cfffff]
- [ 0.360687] pci 0000:09:00.0: [1b4b:9123] type 00 class 0x010601
- [ 0.360704] pci 0000:09:00.0: reg 10: [io 0xcc00-0xcc07]
- [ 0.360716] pci 0000:09:00.0: reg 14: [io 0xc880-0xc883]
- [ 0.360727] pci 0000:09:00.0: reg 18: [io 0xc800-0xc807]
- [ 0.360739] pci 0000:09:00.0: reg 1c: [io 0xc480-0xc483]
- [ 0.360751] pci 0000:09:00.0: reg 20: [io 0xc400-0xc40f]
- [ 0.360762] pci 0000:09:00.0: reg 24: [mem 0xf7dff800-0xf7dfffff]
- [ 0.360774] pci 0000:09:00.0: reg 30: [mem 0xf7de0000-0xf7deffff pref]
- [ 0.360829] pci 0000:09:00.0: PME# supported from D3hot
- [ 0.362494] pci 0000:07:05.0: PCI bridge to [bus 09]
- [ 0.362590] pci 0000:07:05.0: bridge window [io 0xc000-0xcfff]
- [ 0.362594] pci 0000:07:05.0: bridge window [mem 0xf7d00000-0xf7dfffff]
- [ 0.362676] pci 0000:07:07.0: PCI bridge to [bus 0a]
- [ 0.362872] pci 0000:0b:00.0: [8086:10d3] type 00 class 0x020000
- [ 0.362899] pci 0000:0b:00.0: reg 10: [mem 0xf7ee0000-0xf7efffff]
- [ 0.362918] pci 0000:0b:00.0: reg 14: [mem 0xf7e00000-0xf7e7ffff]
- [ 0.362937] pci 0000:0b:00.0: reg 18: [io 0xdc00-0xdc1f]
- [ 0.362956] pci 0000:0b:00.0: reg 1c: [mem 0xf7edc000-0xf7edffff]
- [ 0.363009] pci 0000:0b:00.0: reg 30: [mem 0xf7e80000-0xf7ebffff pref]
- [ 0.363113] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
- [ 0.364502] pci 0000:07:09.0: PCI bridge to [bus 0b]
- [ 0.364598] pci 0000:07:09.0: bridge window [io 0xd000-0xdfff]
- [ 0.364602] pci 0000:07:09.0: bridge window [mem 0xf7e00000-0xf7efffff]
- [ 0.364707] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.364723] pci 0000:05:00.0: reg 10: [io 0xb800-0xb8ff]
- [ 0.364750] pci 0000:05:00.0: reg 18: [mem 0xf2fff000-0xf2ffffff 64bit pref]
- [ 0.364766] pci 0000:05:00.0: reg 20: [mem 0xf2ff8000-0xf2ffbfff 64bit pref]
- [ 0.364777] pci 0000:05:00.0: reg 30: [mem 0xf7af0000-0xf7afffff pref]
- [ 0.364839] pci 0000:05:00.0: supports D1 D2
- [ 0.364840] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.366508] pci 0000:00:1c.4: PCI bridge to [bus 05]
- [ 0.366600] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
- [ 0.366603] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff]
- [ 0.366608] pci 0000:00:1c.4: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
- [ 0.366668] pci 0000:00:1c.5: PCI bridge to [bus 04]
- [ 0.366824] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
- [ 0.366908] pci 0000:03:00.0: reg 24: [mem 0xf79fe000-0xf79fffff]
- [ 0.366969] pci 0000:03:00.0: PME# supported from D3hot
- [ 0.367032] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
- [ 0.367055] pci 0000:03:00.1: reg 10: [io 0xac00-0xac07]
- [ 0.367068] pci 0000:03:00.1: reg 14: [io 0xa880-0xa883]
- [ 0.367081] pci 0000:03:00.1: reg 18: [io 0xa800-0xa807]
- [ 0.367093] pci 0000:03:00.1: reg 1c: [io 0xa480-0xa483]
- [ 0.367106] pci 0000:03:00.1: reg 20: [io 0xa400-0xa40f]
- [ 0.367218] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.367355] pci 0000:00:1c.6: PCI bridge to [bus 03]
- [ 0.367437] pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
- [ 0.367440] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff]
- [ 0.367500] pci 0000:00:1c.7: PCI bridge to [bus 02]
- [ 0.367635] pci 0000:0c:02.0: [1102:0004] type 00 class 0x040100
- [ 0.367651] pci 0000:0c:02.0: reg 10: [io 0xe880-0xe8bf]
- [ 0.367718] pci 0000:0c:02.0: supports D1 D2
- [ 0.367761] pci 0000:0c:02.1: [1102:7003] type 00 class 0x098000
- [ 0.367775] pci 0000:0c:02.1: reg 10: [io 0xec00-0xec07]
- [ 0.367842] pci 0000:0c:02.1: supports D1 D2
- [ 0.367885] pci 0000:0c:02.2: [1102:4001] type 00 class 0x0c0010
- [ 0.367901] pci 0000:0c:02.2: reg 10: [mem 0xf7fff800-0xf7ffffff]
- [ 0.367911] pci 0000:0c:02.2: reg 14: [mem 0xf7ff8000-0xf7ffbfff]
- [ 0.367974] pci 0000:0c:02.2: supports D1 D2
- [ 0.367976] pci 0000:0c:02.2: PME# supported from D0 D1 D2 D3hot
- [ 0.368052] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
- [ 0.368137] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.368140] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
- [ 0.368145] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.368147] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.368148] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.368150] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 0.368151] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
- [ 0.368153] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
- [ 0.368258] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
- [ 0.368481] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
- [ 0.368611] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.369156] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
- [ 0.369620] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
- [ 0.369831] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
- [ 0.370289] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
- [ 0.370749] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
- [ 0.371311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
- [ 0.371772] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
- [ 0.372230] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
- [ 0.372747] ACPI: Enabled 1 GPEs in block 00 to 3F
- [ 0.372891] acpi root: \_SB_.PCI0 notify handler is installed
- [ 0.372930] Found 1 acpi root devices
- [ 0.372956] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
- [ 0.373123] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.373250] vgaarb: loaded
- [ 0.373326] vgaarb: bridge control possible 0000:01:00.0
- [ 0.373500] SCSI subsystem initialized
- [ 0.373582] ACPI: bus type ATA registered
- [ 0.373734] libata version 3.00 loaded.
- [ 0.373796] ACPI: bus type USB registered
- [ 0.373914] usbcore: registered new interface driver usbfs
- [ 0.374016] usbcore: registered new interface driver hub
- [ 0.374122] usbcore: registered new device driver usb
- [ 0.374284] pps_core: LinuxPPS API ver. 1 registered
- [ 0.374364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.374507] PTP clock support registered
- [ 0.374675] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.374757] PCI: Using ACPI for IRQ routing
- [ 0.375969] PCI: Discovered peer bus 3f
- [ 0.376047] PCI: root bus 3f: using default resources
- [ 0.376048] PCI: Probing PCI hardware (bus 3f)
- [ 0.376075] PCI host bridge to bus 0000:3f
- [ 0.376155] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
- [ 0.376237] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
- [ 0.376321] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
- [ 0.376450] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
- [ 0.376496] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
- [ 0.376540] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
- [ 0.376580] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
- [ 0.376626] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
- [ 0.376667] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
- [ 0.376708] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
- [ 0.376750] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
- [ 0.376793] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
- [ 0.376832] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
- [ 0.376873] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
- [ 0.376915] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
- [ 0.376958] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
- [ 0.377000] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
- [ 0.377040] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
- [ 0.377090] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
- [ 0.377093] PCI: pci_cache_line_size set to 64 bytes
- [ 0.377182] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
- [ 0.377184] e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff]
- [ 0.377378] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.377459] NetLabel: Initializing
- [ 0.377460] NetLabel: domain hash size = 128
- [ 0.377460] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.377469] NetLabel: unlabeled traffic allowed by default
- [ 0.377583] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
- [ 0.377592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
- [ 0.377593] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.379631] hpet: hpet2 irq 40 for MSI
- [ 0.379663] hpet: hpet3 irq 41 for MSI
- [ 0.379701] hpet: hpet4 irq 42 for MSI
- [ 0.379721] hpet: hpet5 irq 43 for MSI
- [ 0.379737] Switching to clocksource hpet
- [ 0.385469] pnp: PnP ACPI init
- [ 0.385552] ACPI: bus type PNP registered
- [ 0.385692] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
- [ 0.385776] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.385803] pnp 00:01: [dma 4]
- [ 0.385840] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.385882] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.385918] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.385955] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.386117] system 00:05: [io 0x0290-0x029f] has been reserved
- [ 0.386200] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.386395] system 00:06: [io 0x04d0-0x04d1] has been reserved
- [ 0.386478] system 00:06: [io 0x0800-0x087f] has been reserved
- [ 0.386560] system 00:06: [io 0x0500-0x057f] has been reserved
- [ 0.386642] system 00:06: [io 0x0600-0x0607] has been reserved
- [ 0.386724] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.386807] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.386898] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
- [ 0.386982] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.387064] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.387129] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.387206] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
- [ 0.387291] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.387396] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.387480] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.387564] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.387654] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.387738] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.387923] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.388008] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.388091] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.388175] system 00:0c: [mem 0x00100000-0xdfffffff] could not be reserved
- [ 0.388259] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
- [ 0.388342] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.388441] pnp: PnP ACPI: found 13 devices
- [ 0.388520] ACPI: bus type PNP unregistered
- [ 0.393220] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-0b] add_size 200000
- [ 0.393232] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
- [ 0.393234] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
- [ 0.393236] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
- [ 0.393243] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
- [ 0.393250] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
- [ 0.393252] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
- [ 0.393254] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
- [ 0.393265] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.393266] pci 0000:00:1c.5: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
- [ 0.393268] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.393270] pci 0000:00:1c.6: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.393272] pci 0000:00:1c.7: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
- [ 0.393273] pci 0000:00:1c.7: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.393275] pci 0000:00:1c.5: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 0.393277] pci 0000:00:1c.7: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- [ 0.393280] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
- [ 0.393406] pci 0000:00:1c.5: BAR 8: assigned [mem 0xf0200000-0xf03fffff]
- [ 0.393490] pci 0000:00:1c.5: BAR 9: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
- [ 0.393615] pci 0000:00:1c.6: BAR 9: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
- [ 0.393741] pci 0000:00:1c.7: BAR 8: assigned [mem 0xf0800000-0xf09fffff]
- [ 0.393824] pci 0000:00:1c.7: BAR 9: assigned [mem 0xf0a00000-0xf0bfffff 64bit pref]
- [ 0.393956] pci 0000:00:1c.5: BAR 7: assigned [io 0x1000-0x1fff]
- [ 0.394038] pci 0000:00:1c.7: BAR 7: assigned [io 0x2000-0x2fff]
- [ 0.394121] pci 0000:00:03.0: PCI bridge to [bus 01]
- [ 0.394202] pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]
- [ 0.394285] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf78fffff]
- [ 0.394369] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.394497] pci 0000:07:01.0: PCI bridge to [bus 08]
- [ 0.394581] pci 0000:07:01.0: bridge window [mem 0xf7c00000-0xf7cfffff]
- [ 0.394671] pci 0000:07:05.0: PCI bridge to [bus 09]
- [ 0.394752] pci 0000:07:05.0: bridge window [io 0xc000-0xcfff]
- [ 0.394844] pci 0000:07:05.0: bridge window [mem 0xf7d00000-0xf7dfffff]
- [ 0.394934] pci 0000:07:07.0: PCI bridge to [bus 0a]
- [ 0.395024] pci 0000:07:09.0: PCI bridge to [bus 0b]
- [ 0.395105] pci 0000:07:09.0: bridge window [io 0xd000-0xdfff]
- [ 0.395191] pci 0000:07:09.0: bridge window [mem 0xf7e00000-0xf7efffff]
- [ 0.395281] pci 0000:06:00.0: PCI bridge to [bus 07-0b]
- [ 0.395362] pci 0000:06:00.0: bridge window [io 0xc000-0xdfff]
- [ 0.395448] pci 0000:06:00.0: bridge window [mem 0xf7c00000-0xf7efffff]
- [ 0.395538] pci 0000:00:1c.0: PCI bridge to [bus 06-0b]
- [ 0.395619] pci 0000:00:1c.0: bridge window [io 0xc000-0xdfff]
- [ 0.395703] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7efffff]
- [ 0.395788] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
- [ 0.395921] pci 0000:00:1c.4: PCI bridge to [bus 05]
- [ 0.396002] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
- [ 0.396086] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff]
- [ 0.396171] pci 0000:00:1c.4: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
- [ 0.396299] pci 0000:00:1c.5: PCI bridge to [bus 04]
- [ 0.396380] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
- [ 0.396464] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff]
- [ 0.396548] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
- [ 0.396677] pci 0000:00:1c.6: PCI bridge to [bus 03]
- [ 0.396758] pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
- [ 0.396847] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff]
- [ 0.396932] pci 0000:00:1c.6: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
- [ 0.397060] pci 0000:00:1c.7: PCI bridge to [bus 02]
- [ 0.397141] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
- [ 0.397225] pci 0000:00:1c.7: bridge window [mem 0xf0800000-0xf09fffff]
- [ 0.397309] pci 0000:00:1c.7: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
- [ 0.397437] pci 0000:00:1e.0: PCI bridge to [bus 0c]
- [ 0.397518] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.397602] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
- [ 0.397971] pci 0000:00:1c.5: enabling device (0104 -> 0107)
- [ 0.398162] pci 0000:00:1c.7: enabling device (0104 -> 0107)
- [ 0.398300] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.398303] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.398305] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.398306] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.398308] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.398310] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
- [ 0.398311] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
- [ 0.398313] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
- [ 0.398314] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf78fffff]
- [ 0.398316] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.398318] pci_bus 0000:06: resource 0 [io 0xc000-0xdfff]
- [ 0.398320] pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7efffff]
- [ 0.398321] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
- [ 0.398323] pci_bus 0000:07: resource 0 [io 0xc000-0xdfff]
- [ 0.398324] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7efffff]
- [ 0.398326] pci_bus 0000:08: resource 1 [mem 0xf7c00000-0xf7cfffff]
- [ 0.398328] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
- [ 0.398329] pci_bus 0000:09: resource 1 [mem 0xf7d00000-0xf7dfffff]
- [ 0.398331] pci_bus 0000:0b: resource 0 [io 0xd000-0xdfff]
- [ 0.398332] pci_bus 0000:0b: resource 1 [mem 0xf7e00000-0xf7efffff]
- [ 0.398334] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
- [ 0.398336] pci_bus 0000:05: resource 1 [mem 0xf7a00000-0xf7afffff]
- [ 0.398338] pci_bus 0000:05: resource 2 [mem 0xf2f00000-0xf2ffffff 64bit pref]
- [ 0.398339] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
- [ 0.398341] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
- [ 0.398342] pci_bus 0000:04: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
- [ 0.398344] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
- [ 0.398346] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
- [ 0.398347] pci_bus 0000:03: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
- [ 0.398349] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- [ 0.398350] pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf09fffff]
- [ 0.398352] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
- [ 0.398354] pci_bus 0000:0c: resource 0 [io 0xe000-0xefff]
- [ 0.398355] pci_bus 0000:0c: resource 1 [mem 0xf7f00000-0xf7ffffff]
- [ 0.398357] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
- [ 0.398358] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
- [ 0.398360] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.398362] pci_bus 0000:0c: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.398363] pci_bus 0000:0c: resource 8 [mem 0xe0000000-0xf7ffffff]
- [ 0.398365] pci_bus 0000:0c: resource 9 [mem 0xfc000000-0xfed8ffff]
- [ 0.398367] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
- [ 0.398368] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
- [ 0.398390] NET: Registered protocol family 2
- [ 0.398661] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
- [ 0.399403] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.399763] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.400665] TCP: reno registered
- [ 0.400757] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.400957] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.401189] NET: Registered protocol family 1
- [ 0.401337] RPC: Registered named UNIX socket transport module.
- [ 0.401420] RPC: Registered udp transport module.
- [ 0.401499] RPC: Registered tcp transport module.
- [ 0.401578] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.401752] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.424062] pci 0000:00:1d.0: EHCI: BIOS handoff
- [ 0.439525] pci 0000:01:00.0: Boot video device
- [ 0.439622] PCI: CLS 32 bytes, default 64
- [ 0.439656] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.439740] software IO TLB [mem 0xdbe70000-0xdfe70000] (64MB) mapped at [ffff8800dbe70000-ffff8800dfe6ffff]
- [ 0.440394] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
- [ 0.440479] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
- [ 0.440563] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
- [ 0.440648] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
- [ 0.440769] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.440903] Scanning for low memory corruption every 60 seconds
- [ 0.441186] audit: initializing netlink socket (disabled)
- [ 0.441277] type=2000 audit(1383882479.255:1): initialized
- [ 0.461606] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.463995] VFS: Disk quotas dquot_6.5.2
- [ 0.464134] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.465251] NFS: Registering the id_resolver key type
- [ 0.465339] Key type id_resolver registered
- [ 0.465417] Key type id_legacy registered
- [ 0.465501] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.465724] fuse init (API version 7.22)
- [ 0.466231] bio: create slab <bio-1> at 1
- [ 0.466479] Btrfs loaded
- [ 0.466558] msgmni has been set to 24023
- [ 0.466711] SELinux: Registering netfilter hooks
- [ 0.467084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.467210] io scheduler noop registered
- [ 0.467288] io scheduler deadline registered
- [ 0.467407] io scheduler cfq registered (default)
- [ 0.467759] pcieport 0000:06:00.0: irq 45 for MSI/MSI-X
- [ 0.467860] pcieport 0000:07:01.0: irq 46 for MSI/MSI-X
- [ 0.467971] pcieport 0000:07:05.0: irq 47 for MSI/MSI-X
- [ 0.468067] pcieport 0000:07:07.0: irq 48 for MSI/MSI-X
- [ 0.468165] pcieport 0000:07:09.0: irq 49 for MSI/MSI-X
- [ 0.468340] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.469007] Non-volatile memory driver v1.3
- [ 0.469138] Linux agpgart interface v0.103
- [ 0.469368] intel_idle: MWAIT substates: 0x1120
- [ 0.469373] intel_idle: v0.4 model 0x1E
- [ 0.469374] intel_idle: lapic_timer_reliable_states 0x2
- [ 0.469481] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.469610] ACPI: Power Button [PWRB]
- [ 0.469732] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.469858] ACPI: Power Button [PWRF]
- [ 0.470079] ACPI: Requesting acpi_cpufreq
- [ 0.472065] [drm] Initialized drm 1.1.0 20060810
- [ 0.473006] loop: module loaded
- [ 0.473484] ahci 0000:00:1f.2: version 3.0
- [ 0.473576] ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
- [ 0.473601] ahci: SSS flag set, parallel bus scan disabled
- [ 0.483920] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- [ 0.484048] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
- [ 0.484177] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.494577] scsi0 : ahci
- [ 0.494750] scsi1 : ahci
- [ 0.494915] scsi2 : ahci
- [ 0.495075] scsi3 : ahci
- [ 0.495221] scsi4 : ahci
- [ 0.495368] scsi5 : ahci
- [ 0.495522] ata1: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7100 irq 50
- [ 0.495648] ata2: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7180 irq 50
- [ 0.495773] ata3: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7200 irq 50
- [ 0.495904] ata4: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7280 irq 50
- [ 0.496029] ata5: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7300 irq 50
- [ 0.496154] ata6: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7380 irq 50
- [ 0.496340] ahci 0000:09:00.0: irq 51 for MSI/MSI-X
- [ 0.496397] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 0.496524] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
- [ 0.496653] ahci 0000:09:00.0: port 0 can do FBS, forcing FBSCP
- [ 0.496767] ahci 0000:09:00.0: port 1 can do FBS, forcing FBSCP
- [ 0.497115] scsi6 : ahci
- [ 0.497262] scsi7 : ahci
- [ 0.497394] ata7: SATA max UDMA/133 abar m2048@0xf7dff800 port 0xf7dff900 irq 51
- [ 0.497520] ata8: SATA max UDMA/133 abar m2048@0xf7dff800 port 0xf7dff980 irq 51
- [ 0.507928] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 0.508055] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 0.508418] scsi8 : ahci
- [ 0.508565] scsi9 : ahci
- [ 0.508705] ata9: SATA max UDMA/133 abar m8192@0xf79fe000 port 0xf79fe100 irq 18
- [ 0.508831] ata10: SATA max UDMA/133 abar m8192@0xf79fe000 port 0xf79fe180 irq 18
- [ 0.509122] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
- [ 0.509244] pata_jmicron 0000:03:00.1: setting latency timer to 64
- [ 0.509516] scsi10 : pata_jmicron
- [ 0.509762] scsi11 : pata_jmicron
- [ 0.509997] ata11: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
- [ 0.510122] ata12: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
- [ 0.510443] PPP generic driver version 2.4.2
- [ 0.510580] NET: Registered protocol family 24
- [ 0.510728] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.510811] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 0.510813] ehci-pci: EHCI PCI platform driver
- [ 0.510983] ehci-pci 0000:00:1a.0: setting latency timer to 64
- [ 0.510993] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 0.511116] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.511251] ehci-pci 0000:00:1a.0: debug port 2
- [ 0.511333] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.511336] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.511351] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.515251] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
- [ 0.515253] ehci-pci 0000:00:1a.0: supports USB remote wakeup
- [ 0.515265] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3ffe000
- [ 0.515349] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.520916] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.521014] usb usb1: default language 0x0409
- [ 0.521019] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.521021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.521104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.521228] usb usb1: Product: EHCI Host Controller
- [ 0.521308] usb usb1: Manufacturer: Linux 3.10.7-gentoo-r1 ehci_hcd
- [ 0.521390] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.521543] usb usb1: usb_probe_device
- [ 0.521545] usb usb1: configuration #1 chosen from 1 choice
- [ 0.521551] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.521585] hub 1-0:1.0: usb_probe_interface
- [ 0.521586] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.521588] hub 1-0:1.0: USB hub found
- [ 0.521668] hub 1-0:1.0: 2 ports detected
- [ 0.521747] hub 1-0:1.0: standalone hub
- [ 0.521748] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.521749] hub 1-0:1.0: individual port over-current protection
- [ 0.521750] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.521753] hub 1-0:1.0: local power source is good
- [ 0.521774] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
- [ 0.521776] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.521874] ehci-pci 0000:00:1d.0: setting latency timer to 64
- [ 0.521882] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 0.522023] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.522157] ehci-pci 0000:00:1d.0: debug port 2
- [ 0.522239] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
- [ 0.522241] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 0.522255] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.526150] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
- [ 0.526151] ehci-pci 0000:00:1d.0: supports USB remote wakeup
- [ 0.526162] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3ffd000
- [ 0.526246] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 0.531921] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.532011] usb usb2: default language 0x0409
- [ 0.532015] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.532017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.532100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.532224] usb usb2: Product: EHCI Host Controller
- [ 0.532304] usb usb2: Manufacturer: Linux 3.10.7-gentoo-r1 ehci_hcd
- [ 0.532386] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.532533] usb usb2: usb_probe_device
- [ 0.532536] usb usb2: configuration #1 chosen from 1 choice
- [ 0.532540] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.532574] hub 2-0:1.0: usb_probe_interface
- [ 0.532575] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.532577] hub 2-0:1.0: USB hub found
- [ 0.532656] hub 2-0:1.0: 2 ports detected
- [ 0.532735] hub 2-0:1.0: standalone hub
- [ 0.532736] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.532737] hub 2-0:1.0: individual port over-current protection
- [ 0.532738] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.532741] hub 2-0:1.0: local power source is good
- [ 0.532760] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
- [ 0.532762] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.532814] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.532897] ohci_hcd: block sizes: ed 80 td 96
- [ 0.532941] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.533096] xhci_hcd 0000:08:00.0: xHCI Host Controller
- [ 0.533226] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
- [ 0.533496] xhci_hcd 0000:08:00.0: supports USB remote wakeup
- [ 0.533515] xhci_hcd 0000:08:00.0: irq 52 for MSI/MSI-X
- [ 0.533520] xhci_hcd 0000:08:00.0: irq 53 for MSI/MSI-X
- [ 0.533525] xhci_hcd 0000:08:00.0: irq 54 for MSI/MSI-X
- [ 0.533529] xhci_hcd 0000:08:00.0: irq 55 for MSI/MSI-X
- [ 0.533534] xhci_hcd 0000:08:00.0: irq 56 for MSI/MSI-X
- [ 0.533617] usb usb3: default language 0x0409
- [ 0.533621] usb usb3: udev 1, busnum 3, minor = 256
- [ 0.533623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.533706] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.533831] usb usb3: Product: xHCI Host Controller
- [ 0.533923] usb usb3: Manufacturer: Linux 3.10.7-gentoo-r1 xhci_hcd
- [ 0.534005] usb usb3: SerialNumber: 0000:08:00.0
- [ 0.534148] usb usb3: usb_probe_device
- [ 0.534150] usb usb3: configuration #1 chosen from 1 choice
- [ 0.534152] xHCI xhci_add_endpoint called for root hub
- [ 0.534153] xHCI xhci_check_bandwidth called for root hub
- [ 0.534157] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 0.534191] hub 3-0:1.0: usb_probe_interface
- [ 0.534193] hub 3-0:1.0: usb_probe_interface - got id
- [ 0.534194] hub 3-0:1.0: USB hub found
- [ 0.534277] hub 3-0:1.0: 2 ports detected
- [ 0.534356] hub 3-0:1.0: standalone hub
- [ 0.534357] hub 3-0:1.0: individual port power switching
- [ 0.534358] hub 3-0:1.0: individual port over-current protection
- [ 0.534359] hub 3-0:1.0: Single TT
- [ 0.534361] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.534362] hub 3-0:1.0: power on to power good time: 20ms
- [ 0.534365] hub 3-0:1.0: local power source is good
- [ 0.534372] hub 3-0:1.0: enabling power on all ports
- [ 0.534404] xhci_hcd 0000:08:00.0: xHCI Host Controller
- [ 0.534528] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
- [ 0.534656] xhci_hcd 0000:08:00.0: supports USB remote wakeup
- [ 0.536845] usb usb4: skipped 1 descriptor after endpoint
- [ 0.536848] usb usb4: default language 0x0409
- [ 0.536852] usb usb4: udev 1, busnum 4, minor = 384
- [ 0.536853] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- [ 0.536942] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.537066] usb usb4: Product: xHCI Host Controller
- [ 0.537146] usb usb4: Manufacturer: Linux 3.10.7-gentoo-r1 xhci_hcd
- [ 0.537228] usb usb4: SerialNumber: 0000:08:00.0
- [ 0.537369] usb usb4: usb_probe_device
- [ 0.537371] usb usb4: configuration #1 chosen from 1 choice
- [ 0.537373] xHCI xhci_add_endpoint called for root hub
- [ 0.537374] xHCI xhci_check_bandwidth called for root hub
- [ 0.537378] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 0.537414] hub 4-0:1.0: usb_probe_interface
- [ 0.537415] hub 4-0:1.0: usb_probe_interface - got id
- [ 0.537417] hub 4-0:1.0: USB hub found
- [ 0.537503] hub 4-0:1.0: 2 ports detected
- [ 0.537581] hub 4-0:1.0: standalone hub
- [ 0.537582] hub 4-0:1.0: individual port power switching
- [ 0.537584] hub 4-0:1.0: individual port over-current protection
- [ 0.537585] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.537586] hub 4-0:1.0: power on to power good time: 20ms
- [ 0.537589] hub 4-0:1.0: local power source is good
- [ 0.537596] hub 4-0:1.0: enabling power on all ports
- [ 0.542987] usbcore: registered new interface driver usblp
- [ 0.543110] usbcore: registered new interface driver usb-storage
- [ 0.543317] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.545982] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.546064] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.546244] mousedev: PS/2 mouse device common for all mice
- [ 0.546520] input: PC Speaker as /devices/platform/pcspkr/input/input2
- [ 0.546676] rtc_cmos 00:02: RTC can wake from S4
- [ 0.546875] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 0.546987] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.547193] cpuidle: using governor ladder
- [ 0.547339] cpuidle: using governor menu
- [ 0.547470] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.548110] usbcore: registered new interface driver usbhid
- [ 0.548191] usbhid: USB HID core driver
- [ 0.549968] Netfilter messages via NETLINK v0.30.
- [ 0.550055] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.550224] ctnetlink v0.93: registering with nfnetlink.
- [ 0.550385] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.550484] TCP: cubic registered
- [ 0.550561] Initializing XFRM netlink socket
- [ 0.550799] NET: Registered protocol family 10
- [ 0.551116] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.551366] sit: IPv6 over IPv4 tunneling driver
- [ 0.552507] NET: Registered protocol family 17
- [ 0.552600] Key type dns_resolver registered
- [ 0.553079] PM: Hibernation image not present or could not be loaded.
- [ 0.553086] registered taskstats version 1
- [ 0.553660] Magic number: 5:183:765
- [ 0.553778] console [netcon0] enabled
- [ 0.553855] netconsole: network logging started
- [ 0.553943] p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
- [ 0.554150] ALSA device list:
- [ 0.554227] #0: Loopback 1
- [ 0.554303] #1: Virtual MIDI Card 1
- [ 0.621051] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.621060] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 0.632053] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.632062] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 0.634130] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 0.637135] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 0.704677] ata11.00: ATAPI: HITACHI DVD-ROM GD-2500, 0011, max MWDMA2
- [ 0.721162] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 0.721175] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.726682] ata11.00: configured for MWDMA2
- [ 0.772513] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 0.772518] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.814212] ata10: SATA link down (SStatus 0 SControl 300)
- [ 0.814333] ata9: SATA link down (SStatus 0 SControl 300)
- [ 0.823161] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 0.874443] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 0.874448] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.937701] usb 1-1: udev 2, busnum 1, minor = 1
- [ 0.937707] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
- [ 0.937802] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 0.938345] usb 1-1: usb_probe_device
- [ 0.938351] usb 1-1: configuration #1 chosen from 1 choice
- [ 0.938569] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 0.938881] hub 1-1:1.0: usb_probe_interface
- [ 0.938887] hub 1-1:1.0: usb_probe_interface - got id
- [ 0.938891] hub 1-1:1.0: USB hub found
- [ 0.939216] hub 1-1:1.0: 6 ports detected
- [ 0.939306] hub 1-1:1.0: standalone hub
- [ 0.939310] hub 1-1:1.0: individual port power switching
- [ 0.939313] hub 1-1:1.0: individual port over-current protection
- [ 0.939315] hub 1-1:1.0: Single TT
- [ 0.939319] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 0.939322] hub 1-1:1.0: Port indicators are supported
- [ 0.939327] hub 1-1:1.0: power on to power good time: 100ms
- [ 0.939668] hub 1-1:1.0: local power source is good
- [ 0.939721] hub 1-1:1.0: enabling power on all ports
- [ 0.940563] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
- [ 0.940573] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.956223] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.956563] ata1.00: ATAPI: ASUS DRW-2014L1T, 1.02, max UDMA/66
- [ 0.957116] ata1.00: configured for UDMA/66
- [ 0.957326] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 370)
- [ 0.957351] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
- [ 0.958449] scsi 0:0:0:0: CD-ROM ASUS DRW-2014L1T 1.02 PQ: 0 ANSI: 5
- [ 0.961489] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.961629] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.962464] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 0.963079] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 0.969281] ata8.00: ATA-9: INTEL SSDSC2CT080A4, 335u, max UDMA/133
- [ 0.969374] ata8.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 0.969462] ata7.00: ATA-9: INTEL SSDSC2CT080A4, 335u, max UDMA/133
- [ 0.969546] ata7.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 0.979321] ata7.00: configured for UDMA/133
- [ 0.979417] ata8.00: configured for UDMA/133
- [ 0.991504] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 0.991508] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.040317] hub 1-1:1.0: port 1: status 0101 change 0001
- [ 1.042219] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 1.093560] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 1.093564] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.140314] usb 1-1: link qh256-0001/ffff880310f1ec80 start 1 [1/0 us]
- [ 1.156808] usb 2-1: udev 2, busnum 2, minor = 129
- [ 1.156814] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
- [ 1.156910] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.157469] usb 2-1: usb_probe_device
- [ 1.157475] usb 2-1: configuration #1 chosen from 1 choice
- [ 1.157681] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 1.158113] hub 2-1:1.0: usb_probe_interface
- [ 1.158116] hub 2-1:1.0: usb_probe_interface - got id
- [ 1.158118] hub 2-1:1.0: USB hub found
- [ 1.158422] hub 2-1:1.0: 8 ports detected
- [ 1.158514] hub 2-1:1.0: standalone hub
- [ 1.158517] hub 2-1:1.0: individual port power switching
- [ 1.158520] hub 2-1:1.0: individual port over-current protection
- [ 1.158523] hub 2-1:1.0: Single TT
- [ 1.158526] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.158529] hub 2-1:1.0: Port indicators are supported
- [ 1.158532] hub 2-1:1.0: power on to power good time: 100ms
- [ 1.158928] hub 2-1:1.0: local power source is good
- [ 1.158995] hub 2-1:1.0: enabling power on all ports
- [ 1.160049] hub 1-1:1.0: state 7 ports 6 chg 0002 evt 0000
- [ 1.160117] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 1.171433] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
- [ 1.233587] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
- [ 1.244608] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
- [ 1.260191] hub 2-1:1.0: port 7: status 0101 change 0001
- [ 1.260440] hub 2-1:1.0: port 8: status 0101 change 0001
- [ 1.269378] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.318394] usb 1-1.1: ep0 maxpacket = 8
- [ 1.320473] usb 1-1.1: default language 0x0409
- [ 1.320726] usb 1-1.1: udev 3, busnum 1, minor = 2
- [ 1.320731] usb 1-1.1: New USB device found, idVendor=0a5c, idProduct=4500
- [ 1.320826] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.320958] usb 1-1.1: Product: BCM2046B1
- [ 1.321036] usb 1-1.1: Manufacturer: Broadcom
- [ 1.321564] usb 1-1.1: usb_probe_device
- [ 1.321570] usb 1-1.1: configuration #1 chosen from 1 choice
- [ 1.321752] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
- [ 1.322031] hub 1-1.1:1.0: usb_probe_interface
- [ 1.322036] hub 1-1.1:1.0: usb_probe_interface - got id
- [ 1.322039] hub 1-1.1:1.0: USB hub found
- [ 1.322384] hub 1-1.1:1.0: 3 ports detected
- [ 1.322473] hub 1-1.1:1.0: compound device; port removable status: FFF
- [ 1.322476] hub 1-1.1:1.0: ganged power switching
- [ 1.322481] hub 1-1.1:1.0: global over-current protection
- [ 1.322482] hub 1-1.1:1.0: power on to power good time: 100ms
- [ 1.322597] hub 1-1.1:1.0: hub controller current requirement: 100mA
- [ 1.322601] hub 1-1.1:1.0: 100mA bus power budget for each child
- [ 1.322725] hub 1-1.1:1.0: no over-current condition exists
- [ 1.322751] hub 1-1.1:1.0: enabling power on all ports
- [ 1.323270] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 1.360422] usb 2-1: link qh256-0001/ffff880310f1ed80 start 1 [1/0 us]
- [ 1.360504] hub 2-1:1.0: state 7 ports 8 chg 0180 evt 0000
- [ 1.360654] hub 2-1:1.0: port 7, status 0101, change 0000, 12 Mb/s
- [ 1.371481] hub 2-1:1.0: port 7 not reset yet, waiting 10ms
- [ 1.422708] hub 1-1.1:1.0: port 1: status 0101 change 0001
- [ 1.423202] hub 1-1.1:1.0: port 2: status 0101 change 0001
- [ 1.423705] hub 1-1.1:1.0: port 3: status 0101 change 0001
- [ 1.433584] usb 2-1.7: new full-speed USB device number 3 using ehci-pci
- [ 1.441457] tsc: Refined TSC clocksource calibration: 2674.966 MHz
- [ 1.441554] Switching to clocksource tsc
- [ 1.444598] hub 2-1:1.0: port 7 not reset yet, waiting 10ms
- [ 1.520581] usb 2-1.7: skipped 1 descriptor after interface
- [ 1.520588] usb 2-1.7: skipped 1 descriptor after interface
- [ 1.520592] usb 2-1.7: skipped 1 descriptor after interface
- [ 1.520838] usb 2-1.7: default language 0x0409
- [ 1.521209] usb 2-1.7: udev 3, busnum 2, minor = 130
- [ 1.521214] usb 2-1.7: New USB device found, idVendor=1532, idProduct=0118
- [ 1.521309] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.521446] usb 2-1.7: Product: Razer DeathStalker
- [ 1.521526] usb 2-1.7: Manufacturer: Razer
- [ 1.521868] usb 2-1.7: usb_probe_device
- [ 1.521871] usb 2-1.7: configuration #1 chosen from 1 choice
- [ 1.522059] usb 2-1.7: adding 2-1.7:1.0 (config #1, interface 0)
- [ 1.522271] usbhid 2-1.7:1.0: usb_probe_interface
- [ 1.522273] usbhid 2-1.7:1.0: usb_probe_interface - got id
- [ 1.523387] input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input3
- [ 1.523533] usb 1-1.1: link qh128-0601/ffff880310f1ef00 start 2 [1/2 us]
- [ 1.523563] usb 2-1.7: link qh1-0601/ffff880310f1ef80 start 0 [1/2 us]
- [ 1.524002] hid-generic 0003:1532:0118.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer DeathStalker] on usb-0000:00:1d.0-1.7/input0
- [ 1.524145] usb 2-1.7: adding 2-1.7:1.1 (config #1, interface 1)
- [ 1.524281] usbhid 2-1.7:1.1: usb_probe_interface
- [ 1.524283] usbhid 2-1.7:1.1: usb_probe_interface - got id
- [ 1.527845] input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input4
- [ 1.528059] usb 2-1.7: link qh1-3008/ffff880310f1ea00 start 0 [1/2 us]
- [ 1.528659] hid-generic 0003:1532:0118.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathStalker] on usb-0000:00:1d.0-1.7/input1
- [ 1.528818] usb 2-1.7: adding 2-1.7:1.2 (config #1, interface 2)
- [ 1.529036] usbhid 2-1.7:1.2: usb_probe_interface
- [ 1.529042] usbhid 2-1.7:1.2: usb_probe_interface - got id
- [ 1.531078] input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/input/input5
- [ 1.532214] hid-generic 0003:1532:0118.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathStalker] on usb-0000:00:1d.0-1.7/input2
- [ 1.532427] hub 2-1:1.0: port 8, status 0101, change 0000, 12 Mb/s
- [ 1.543624] hub 2-1:1.0: port 8 not reset yet, waiting 10ms
- [ 1.574471] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.605671] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
- [ 1.680567] usb 2-1.8: ep0 maxpacket = 8
- [ 1.683926] usb 2-1.8: skipped 1 descriptor after interface
- [ 1.684303] usb 2-1.8: default language 0x0409
- [ 1.685426] usb 2-1.8: udev 4, busnum 2, minor = 131
- [ 1.685432] usb 2-1.8: New USB device found, idVendor=1532, idProduct=0029
- [ 1.685535] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.685665] usb 2-1.8: Product: Razer DeathAdder
- [ 1.685745] usb 2-1.8: Manufacturer: Razer
- [ 1.686350] usb 2-1.8: usb_probe_device
- [ 1.686353] usb 2-1.8: configuration #1 chosen from 1 choice
- [ 1.686648] usb 2-1.8: adding 2-1.8:1.0 (config #1, interface 0)
- [ 1.686883] usbhid 2-1.8:1.0: usb_probe_interface
- [ 1.686888] usbhid 2-1.8:1.0: usb_probe_interface - got id
- [ 1.689256] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input6
- [ 1.690415] hid-generic 0003:1532:0029.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1d.0-1.8/input0
- [ 1.690580] hub 1-1.1:1.0: state 7 ports 3 chg 000e evt 0000
- [ 1.690807] hub 1-1.1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 1.752753] usb 1-1.1.1: new full-speed USB device number 4 using ehci-pci
- [ 1.763882] hub 1-1.1:1.0: port 1 not reset yet, waiting 10ms
- [ 1.837705] usb 1-1.1.1: ep0 maxpacket = 8
- [ 1.841384] usb 1-1.1.1: skipped 1 descriptor after interface
- [ 1.841392] usb 1-1.1.1: udev 4, busnum 1, minor = 3
- [ 1.841397] usb 1-1.1.1: New USB device found, idVendor=0a5c, idProduct=4502
- [ 1.841492] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.842026] usb 1-1.1.1: usb_probe_device
- [ 1.842031] usb 1-1.1.1: configuration #1 chosen from 1 choice
- [ 1.842271] usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0)
- [ 1.842573] usbhid 1-1.1.1:1.0: usb_probe_interface
- [ 1.842578] usbhid 1-1.1.1:1.0: usb_probe_interface - got id
- [ 1.844506] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input7
- [ 1.844663] usb 1-1.1.1: link qh8-0601/ffff880310f1e600 start 3 [1/2 us]
- [ 1.845339] hid-generic 0003:0A5C:4502.0005: input,hidraw4: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.0-1.1.1/input0
- [ 1.845502] hub 1-1.1:1.0: 398mA power budget left
- [ 1.845625] hub 1-1.1:1.0: port 2, status 0101, change 0000, 12 Mb/s
- [ 1.879677] ata4: SATA link down (SStatus 0 SControl 300)
- [ 1.907969] usb 1-1.1.2: new full-speed USB device number 5 using ehci-pci
- [ 1.918958] hub 1-1.1:1.0: port 2 not reset yet, waiting 10ms
- [ 1.992727] usb 1-1.1.2: ep0 maxpacket = 8
- [ 1.996467] usb 1-1.1.2: skipped 1 descriptor after interface
- [ 1.996475] usb 1-1.1.2: udev 5, busnum 1, minor = 4
- [ 1.996480] usb 1-1.1.2: New USB device found, idVendor=0a5c, idProduct=4503
- [ 1.996575] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.997117] usb 1-1.1.2: usb_probe_device
- [ 1.997123] usb 1-1.1.2: configuration #1 chosen from 1 choice
- [ 1.997351] usb 1-1.1.2: adding 1-1.1.2:1.0 (config #1, interface 0)
- [ 1.997651] usbhid 1-1.1.2:1.0: usb_probe_interface
- [ 1.997656] usbhid 1-1.1.2:1.0: usb_probe_interface - got id
- [ 2.000812] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input8
- [ 2.001952] hid-generic 0003:0A5C:4503.0006: input,hidraw5: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.0-1.1.2/input0
- [ 2.002116] hub 1-1.1:1.0: 396mA power budget left
- [ 2.002351] hub 1-1.1:1.0: port 3, status 0101, change 0000, 12 Mb/s
- [ 2.012851] hub 1-1.1:1.0: port 3 not reset yet, waiting 10ms
- [ 2.074918] usb 1-1.1.3: new full-speed USB device number 6 using ehci-pci
- [ 2.086060] hub 1-1.1:1.0: port 3 not reset yet, waiting 10ms
- [ 2.163487] usb 1-1.1.3: skipped 1 descriptor after interface
- [ 2.163815] usb 1-1.1.3: default language 0x0409
- [ 2.164931] usb 1-1.1.3: udev 6, busnum 1, minor = 5
- [ 2.164937] usb 1-1.1.3: New USB device found, idVendor=0a5c, idProduct=2148
- [ 2.165032] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.165163] usb 1-1.1.3: Product: BCM92046DG-CL1ROM
- [ 2.165242] usb 1-1.1.3: Manufacturer: Broadcom Corp
- [ 2.165322] usb 1-1.1.3: SerialNumber: 000272A6BA0D
- [ 2.165788] usb 1-1.1.3: usb_probe_device
- [ 2.165794] usb 1-1.1.3: configuration #1 chosen from 1 choice
- [ 2.165981] usb 1-1.1.3: adding 1-1.1.3:1.0 (config #1, interface 0)
- [ 2.166223] usb 1-1.1.3: adding 1-1.1.3:1.1 (config #1, interface 1)
- [ 2.166458] usb 1-1.1.3: adding 1-1.1.3:1.2 (config #1, interface 2)
- [ 2.166779] usb 1-1.1.3: adding 1-1.1.3:1.3 (config #1, interface 3)
- [ 2.167053] hub 1-1.1:1.0: 394mA power budget left
- [ 2.167058] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0100
- [ 2.167185] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0008
- [ 2.339908] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.341392] ata5.00: ATA-8: ST320DM000-1BD14C, KC45, max UDMA/133
- [ 2.341487] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 2.343279] ata5.00: configured for UDMA/133
- [ 2.343672] scsi 4:0:0:0: Direct-Access ATA ST320DM000-1BD14 KC45 PQ: 0 ANSI: 5
- [ 2.344721] sd 4:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 2.344867] sd 4:0:0:0: [sda] 4096-byte physical blocks
- [ 2.344993] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 2.345280] sd 4:0:0:0: [sda] Write Protect is off
- [ 2.345371] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.345427] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.352079] sda: sda1
- [ 2.353434] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 2.806142] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.853539] ata6.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
- [ 2.853622] ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 2.911727] ata6.00: configured for UDMA/133
- [ 2.912112] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
- [ 2.913178] sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 2.913372] sd 5:0:0:0: Attached scsi generic sg2 type 0
- [ 2.913506] sd 5:0:0:0: [sdb] Write Protect is off
- [ 2.913596] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.913605] scsi 6:0:0:0: Direct-Access ATA INTEL SSDSC2CT08 335u PQ: 0 ANSI: 5
- [ 2.913622] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.913967] sd 6:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 2.914023] sd 6:0:0:0: Attached scsi generic sg3 type 0
- [ 2.914119] scsi 7:0:0:0: Direct-Access ATA INTEL SSDSC2CT08 335u PQ: 0 ANSI: 5
- [ 2.914243] sd 7:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 2.914285] sd 7:0:0:0: Attached scsi generic sg4 type 0
- [ 2.914307] sd 7:0:0:0: [sdd] Write Protect is off
- [ 2.914308] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 2.914326] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.914767] sd 6:0:0:0: [sdc] Write Protect is off
- [ 2.914849] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 2.914866] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.916856] sdd: sdd1
- [ 2.917209] sd 7:0:0:0: [sdd] Attached SCSI disk
- [ 2.917382] sdc: sdc1 sdc2
- [ 2.917764] sd 6:0:0:0: [sdc] Attached SCSI disk
- [ 2.932866] scsi 10:0:0:0: CD-ROM HITACHI DVD-ROM GD-2500 0011 PQ: 0 ANSI: 5
- [ 2.961149] sr1: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
- [ 2.961655] sr 10:0:0:0: Attached scsi CD-ROM sr1
- [ 2.962074] sr 10:0:0:0: Attached scsi generic sg5 type 5
- [ 2.983079] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
- [ 2.984601] sd 5:0:0:0: [sdb] Attached SCSI disk
- [ 3.127122] EXT3-fs (sdd1): error: couldn't mount because of unsupported optional features (240)
- [ 3.127427] EXT2-fs (sdd1): error: couldn't mount because of unsupported optional features (244)
- [ 3.128324] EXT4-fs (sdd1): INFO: recovery required on readonly filesystem
- [ 3.128408] EXT4-fs (sdd1): write access will be enabled during recovery
- [ 3.186140] EXT4-fs (sdd1): recovery complete
- [ 3.186748] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.186897] VFS: Mounted root (ext4 filesystem) readonly on device 8:49.
- [ 3.187861] Freeing unused kernel memory: 1008k freed
- [ 3.188062] Write protecting the kernel read-only data: 14336k
- [ 3.191716] Freeing unused kernel memory: 1664k freed
- [ 3.194731] Freeing unused kernel memory: 1552k freed
- [ 3.254872] kbd_mode (1201) used greatest stack depth: 5640 bytes left
- [ 3.261845] loadkeys (1202) used greatest stack depth: 4952 bytes left
- [ 3.262726] init-early.sh (1200) used greatest stack depth: 4616 bytes left
- [ 33.929859] ata8.00: exception Emask 0x0 SAct 0x20000003 SErr 0x0 action 0x6 frozen
- [ 33.929998] ata8.00: failed command: READ FPDMA QUEUED
- [ 33.930080] ata8.00: cmd 60/08:00:00:38:80/00:00:07:00:00/40 tag 0 ncq 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 33.930298] ata8.00: status: { DRDY }
- [ 33.930376] ata8.00: failed command: READ FPDMA QUEUED
- [ 33.930458] ata8.00: cmd 60/08:08:c8:37:80/00:00:07:00:00/40 tag 1 ncq 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 33.930692] ata8.00: status: { DRDY }
- [ 33.930771] ata8.00: failed command: READ FPDMA QUEUED
- [ 33.930853] ata8.00: cmd 60/08:e8:f0:37:80/00:00:07:00:00/40 tag 29 ncq 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 33.931070] ata8.00: status: { DRDY }
- [ 33.931150] ata8: hard resetting link
- [ 34.390940] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 370)
- [ 34.412703] ata8.00: configured for UDMA/133
- [ 34.412796] ata8.00: device reported invalid CHS sector 0
- [ 34.412909] ata8.00: device reported invalid CHS sector 0
- [ 34.412990] ata8.00: device reported invalid CHS sector 0
- [ 34.413074] sd 7:0:0:0: [sdd]
- [ 34.413151] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 34.413232] sd 7:0:0:0: [sdd]
- [ 34.413308] Sense Key : Aborted Command [current] [descriptor]
- [ 34.413481] Descriptor sense data with sense descriptors (in hex):
- [ 34.413593] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
- [ 34.414245] 00 00 00 00
- [ 34.414474] sd 7:0:0:0: [sdd]
- [ 34.414551] Add. Sense: No additional sense information
- [ 34.414661] sd 7:0:0:0: [sdd] CDB:
- [ 34.414739] Read(10): 28 00 07 80 38 00 00 00 08 00
- [ 34.415187] end_request: I/O error, dev sdd, sector 125843456
- [ 34.415274] sd 7:0:0:0: [sdd]
- [ 34.415350] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 34.415431] sd 7:0:0:0: [sdd]
- [ 34.415508] Sense Key : Aborted Command [current] [descriptor]
- [ 34.415680] Descriptor sense data with sense descriptors (in hex):
- [ 34.415791] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
- [ 34.416393] 00 00 00 00
- [ 34.416623] sd 7:0:0:0: [sdd]
- [ 34.416699] Add. Sense: No additional sense information
- [ 34.416810] sd 7:0:0:0: [sdd] CDB:
- [ 34.416889] Read(10): 28 00 07 80 37 f0 00 00 08 00
- [ 34.417334] end_request: I/O error, dev sdd, sector 125843440
- [ 34.417417] ata8: EH complete
- [ 34.525590] systemd-udevd[1360]: starting version 204
- [ 34.569502] snd_hda_intel 0000:00:1b.0: irq 57 for MSI/MSI-X
- [ 34.594920] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 34.594930] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 34.594947] e1000e 0000:0b:00.0: Disabling ASPM L0s L1
- [ 34.595111] e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 34.595137] e1000e 0000:0b:00.0: irq 58 for MSI/MSI-X
- [ 34.595142] e1000e 0000:0b:00.0: irq 59 for MSI/MSI-X
- [ 34.595147] e1000e 0000:0b:00.0: irq 60 for MSI/MSI-X
- [ 34.596412] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 34.596586] r8169 0000:05:00.0: irq 61 for MSI/MSI-X
- [ 34.596726] r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0xffffc90005c24000, e0:cb:4e:47:32:67, XID 083000c0 IRQ 61
- [ 34.596728] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 34.607523] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input9
- [ 34.607601] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card2/input10
- [ 34.607655] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card2/input11
- [ 34.607696] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card2/input12
- [ 34.607767] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card2/input13
- [ 34.607803] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
- [ 34.607838] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
- [ 34.607872] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
- [ 34.608367] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
- [ 34.608484] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130328/utaddress-251)
- [ 34.608489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 34.608492] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS1 1 (20130328/utaddress-251)
- [ 34.608494] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 2 (20130328/utaddress-251)
- [ 34.608497] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 34.608498] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS1 1 (20130328/utaddress-251)
- [ 34.608501] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20130328/utaddress-251)
- [ 34.608503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 34.608515] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 34.618324] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
- [ 34.638174] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
- [ 34.638199] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
- [ 34.638406] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 34.640056] systemd-udevd[1383]: renamed network interface eth0 to enp5s0
- [ 34.652425] nvidia: module license 'NVIDIA' taints kernel.
- [ 34.652430] Disabling lock debugging due to kernel taint
- [ 34.659891] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 34.660098] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
- [ 34.660106] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
- [ 34.669129] nvidia 0000:01:00.0: irq 62 for MSI/MSI-X
- [ 34.699910] e1000e 0000:0b:00.0 eth0: registered PHC clock
- [ 34.699913] e1000e 0000:0b:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1b:21:82:9f:99
- [ 34.699914] e1000e 0000:0b:00.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 34.699928] e1000e 0000:0b:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-004
- [ 34.766389] cdrom_id (1400) used greatest stack depth: 4512 bytes left
- [ 34.771182] systemd-udevd[1378]: renamed network interface eth0 to enp11s0
- [ 36.228462] nvidia-smi (1412) used greatest stack depth: 4424 bytes left
- [ 36.431486] Adding 20971516k swap on /dev/sdb5. Priority:-1 extents:1 across:20971516k
- [ 36.577536] EXT4-fs (sdd1): re-mounted. Opts: (null)
- [ 37.223386] usb 1-1.1.2: link qh8-0601/ffff88030e4a0d80 start 4 [1/2 us]
- [ 39.966844] udevd (1379) used greatest stack depth: 4280 bytes left
- [ 39.967355] udevd (1382) used greatest stack depth: 4264 bytes left
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement